How Do You Find the Interval of Convergence of a Power Series?
Use the Ratio Test on the general term to find the radius of convergence , giving an open interval centered at where the series converges. The Ratio Test gives no information at the two endpoints, so each endpoint must be substituted directly into the series and tested on its own — one endpoint can converge while the other diverges.
For a power series , the Ratio Test gives and the series converges when , i.e. where . This gives the open interval — but and must each be substituted into the original series and tested separately, since the Ratio Test is inconclusive exactly there.
Step-by-Step Method
- Apply the Ratio Test to the general term and simplify the limit to the form .
- Solve to get , giving the radius of convergence and the open interval .
- Substitute the left endpoint directly into the original series and test that resulting numerical series with an appropriate test.
- Substitute the right endpoint directly into the original series and test it separately — never assume it behaves the same way as the other endpoint.
- State the final interval using the correct bracket or parenthesis for each endpoint, based on what you found.
Worked Examples
- Ratio Test: . The series converges when , so and the candidate interval is .
- Test directly: the series becomes , the harmonic series, which diverges.
- Test directly: the series becomes , the alternating harmonic series. Here is positive, decreasing, with limit , so it converges by the Alternating Series Test.
- Interval of convergence: — closed at , open at .
- Ratio Test: . Converges when , so and the candidate interval is .
- Test : , giving , the harmonic series — diverges.
- Test : , giving , the alternating harmonic series — converges, exactly as in the first example.
- Cross-check by substitution: let . The series becomes , which is precisely the series from the foundational example above, with interval in . Converting back: — the same answer.
Common Mistakes on the AP Exam
- Assuming both endpoints behave the same way — one can converge while the other diverges, as in both examples on this page.
- Skipping the endpoint tests entirely and reporting the open interval from the Ratio Test as the final answer.
- Testing an endpoint using the Ratio Test again, which is exactly the test that is guaranteed to be inconclusive there — endpoints need a different test, like the Alternating Series Test or the p-series test.
- Mixing up (the radius) with the interval itself — the interval has width , centered at , before the endpoints are even checked.
- Writing the wrong bracket style — a closed endpoint uses a square bracket, an open or divergent one uses a parenthesis.
How This Appears on the AP Exam
- This is BC-only (Unit 10) content, and interval-of-convergence questions appear on both the multiple-choice and free-response sections.
- An FRQ will often ask for the radius of convergence from the Ratio Test, then separately ask you to justify each endpoint with its own named test.
- Partial credit is awarded for the radius and the open interval even if an endpoint is handled incorrectly, but full credit needs both endpoints justified correctly.
Try a timed AP-style question on this topic — free.
Start FreeFrequently Asked Questions
Why does the Ratio Test fail at the endpoints of a power series?
At the radius of convergence, the Ratio Test limit equals exactly , and is the one value the Ratio Test cannot interpret — the series could converge or diverge there, so each endpoint has to be substituted in and tested on its own.
Can a power series converge at one endpoint but not the other?
Yes — this is common. The series on this page converges at but diverges at , even though both are the same distance from the center.
What is the difference between the radius and the interval of convergence?
The radius is a single number describing how far from the center the series converges; the interval of convergence is the actual set of -values, written with the correct open or closed endpoints after both have been tested.
Which test should I use to check an endpoint?
Substitute the endpoint value into the original series to get a specific numerical series, then apply whichever test fits that series — often the p-series test, the Alternating Series Test, or the nth-term test.
Is finding the interval of convergence tested on the AP Calculus AB exam?
No. Power series and their intervals of convergence are Unit 10 content, tested only on the BC exam.
Related Topics
Keep going with timed tests & full mocks, study materials for every unit, DME Nova — your AI tutorthat won't make up an answer, and FRQ feedback scored against an exam-style rubric.
Start Free