The ACCUPLACER Arithmetic test has 20 multiple-choice questions with four answer choices (A–D). It is computer-adaptive and usually untimed; you cannot skip a question or go back, and there is no handheld calculator, so decimal work is done by hand. This topic covers place value and rounding, adding and subtracting decimals, multiplying decimals and dividing decimals, including money, measurement and unit-price problems.
Place Value, Rounding, Adding and Subtracting
Each place to the right of the decimal point is worth one tenth of the place to its left: tenths, hundredths, thousandths. To add or subtract, line up the decimal points (not the last digits), write zeros at the end so every number has the same number of places, then work as with whole numbers and bring the point straight down. To round, look only at the digit just to the right of the place you want: 5 or more rounds up, 4 or less leaves the digit as it is.
Key formulas| Place values | 0.1=101,0.01=1001,0.001=10001 |
| Zeros at the end keep the value | 2.4=2.40=2.400 |
| A whole number has a hidden point | 9=9.00 |
| Rounding rule | next digit≥5⇒round up |
Adding decimals
Method. Line up the points, fill empty places with zeros, and add.
Worked example. What is 12.6 + 3.85?
- (A) 5.11
- (B) 16.45
- (C) 15.45
- (D) 16.4
AnswerB — 16.45
Step-by-step- Line up the decimal points and write 12.6 as 12.60.
- Add: 12.60 + 3.85 = 16.45.
Fast methodPad with a zero so both numbers have two decimal places, then add as whole numbers.
Quick checkCheck: 16.45 − 3.85 = 12.6 ✓.
Why the other choices are wrong- A (5.11): lined up the last digits instead of the points: 126 + 385 = 511, then placed two decimal places
- C (15.45): forgot to carry 1 from the tenths, where 6 + 8 = 14
- D (16.4): ignored the 5 hundredths: 12.6 + 3.8 = 16.4
Subtracting a decimal from a whole number
Method. Give the whole number a decimal point and zeros, then subtract with borrowing.
Worked example. A board is 8 feet long. A carpenter cuts off a piece 2.65 feet long. How many feet of board are left?
- (A) 6.65
- (B) 10.65
- (C) 5.45
- (D) 5.35
AnswerD — 5.35
Step-by-step- Write 8 as 8.00 so both numbers have two decimal places.
- Subtract: 8.00 − 2.65 = 5.35 feet.
Fast methodCount up from 2.65: 0.35 more makes 3, and 5 more makes 8, so 5.35.
Quick checkCheck: 5.35 + 2.65 = 8 ✓.
Why the other choices are wrong- A (6.65): subtracted the smaller digit from the larger in each place: 8.00 and 2.65 give 6.65
- B (10.65): added instead of subtracting: 8 + 2.65 = 10.65
- C (5.45): borrowed for the tenths and again for the hundredths without taking 1 from the tenths, getting 5.45
Rounding decimals
Method. Find the target place, look one digit right, then round up or keep.
Worked example. What is 47.3862 rounded to the nearest hundredth?
- (A) 47.39
- (B) 47.38
- (C) 47.4
- (D) 47.386
AnswerA — 47.39
Step-by-step- The hundredths digit is 8, and the digit to its right is 6.
- Because 6 is 5 or more, the 8 rounds up to 9, giving 47.39.
Fast methodUnderline the hundredths digit and look one place to the right.
Quick checkCheck: 47.39 − 47.3862 = 0.0038, which is less than 47.3862 − 47.38 = 0.0062 ✓.
Why the other choices are wrong- B (47.38): cut off the digits after the hundredths place without rounding
- C (47.4): rounded to the nearest tenth instead
- D (47.386): rounded to the nearest thousandth instead
Multiplying Decimals
Multiply as if the decimal points were not there. Then count the decimal places in both factors together; the product has exactly that many decimal places. Multiplying by 10, 100 or 1000 moves the point one, two or three places to the right. Estimate first with rounded numbers, so a point in the wrong place stands out.
Key formulas| Decimal places add | (2 places)×(1 place)→3 places |
| Multiplying by a power of ten | 4.56×100=456 |
| Tenths times tenths | 0.3×0.2=0.06 |
| Estimate first | 4.9×3.1≈5×3 |
Multiplying decimals
Method. Multiply as whole numbers, then give the answer as many decimal places as the factors have together.
Worked example. What is 0.7 × 0.08?
- (A) 0.56
- (B) 5.6
- (C) 0.056
- (D) 0.0056
AnswerC — 0.056
Step-by-step- Multiply without the points: 7 × 8 = 56.
- 0.7 has one decimal place and 0.08 has two, so the product has three: 0.056.
Fast methodMultiply the digits, then count the places in both factors.
Quick checkCheck: 0.056 ÷ 0.08 = 0.7 ✓.
Why the other choices are wrong- A (0.56): gave the product only two decimal places
- B (5.6): gave the product only one decimal place
- D (0.0056): gave the product four decimal places
Multiplying money by a decimal
Method. Multiply the digits, place the point by counting, and compare with an estimate.
Worked example. Gasoline costs $3.45 per gallon. How much do 6.2 gallons cost?
- (A) $21.39
- (B) $213.90
- (C) $20.70
- (D) $9.65
AnswerA — $21.39
Step-by-step- Multiply without the points: 345 × 62 = 21390.
- 3.45 has two decimal places and 6.2 has one, so the product has three: 21.390.
- The cost is $21.39.
Fast methodEstimate 3.5 × 6 = 21, so the answer is a little over $21.
Quick checkCheck: 3.45 × 6 = 20.7 and 3.45 × 0.2 = 0.69, and 20.7 + 0.69 = 21.39 ✓.
Why the other choices are wrong- B ($213.90): gave the product only two decimal places: 21390 became 213.90
- C ($20.70): multiplied by 6 and forgot the 0.2 gallon: 3.45 × 6 = 20.70
- D ($9.65): added the numbers instead of multiplying: 3.45 + 6.2 = 9.65
Area with decimals
Method. Use area = length × width and count decimal places in both factors.
Worked example. A rectangular garden is 4.5 meters long and 2.8 meters wide. What is its area in square meters?
- (A) 14.6
- (B) 12.6
- (C) 1.26
- (D) 8.4
AnswerB — 12.6
Step-by-step- Area = length × width.
- Multiply without the points: 45 × 28 = 1260.
- There are two decimal places in all, so the area is 12.60, which is 12.6 square meters.
Fast methodEstimate 4.5 × 3 = 13.5, so the area is a little less than 13.5.
Quick checkCheck: 4.5 × 2.8 = 4.5 × 2 + 4.5 × 0.8 = 9 + 3.6 = 12.6 ✓.
Why the other choices are wrong- A (14.6): found the perimeter instead: 2 × (4.5 + 2.8) = 14.6
- C (1.26): gave the product three decimal places: 1260 became 1.260
- D (8.4): multiplied the whole parts and the decimal parts separately: 4 × 2 = 8 and 0.5 × 0.8 = 0.4, then 8 + 0.4 = 8.4
Dividing Decimals
To divide by a decimal, move the point in the divisor to the right until it is a whole number, and move the point in the dividend the same number of places, adding zeros if needed. Then divide as usual and put the point in the quotient straight above the point in the dividend. Dividing by 10, 100 or 1000 moves the point one, two or three places to the left.
Key formulas| Make the divisor whole | 0.4a=410a |
| Shift both points the same way | 3.6÷0.12→360÷12 |
| Dividing by a power of ten | 52.7÷100=0.527 |
| Unit price | unit price=number of unitstotal cost |
Dividing by a decimal
Method. Make the divisor a whole number, move the dividend’s point the same number of places, then divide.
Worked example. What is 4.2 ÷ 0.06?
- (A) 7
- (B) 0.7
- (C) 700
- (D) 70
AnswerD — 70
Step-by-step- Move both points two places to the right, so the problem becomes 420 ÷ 6.
- Divide: 420 ÷ 6 = 70.
Fast methodAsk how many 6 hundredths fit in 420 hundredths.
Quick checkCheck: 70 × 0.06 = 4.2 ✓.
Why the other choices are wrong- A (7): moved the point two places in 0.06 but only one in 4.2: 42 ÷ 6 = 7
- B (0.7): divided by 6 without moving either point: 4.2 ÷ 6 = 0.7
- C (700): moved the point three places in 4.2: 4200 ÷ 6 = 700
Unit price
Method. Divide the total cost by the number of units.
Worked example. A 2.5-pound bag of rice costs $4.30. What is the price per pound?
- (A) $0.58
- (B) $17.20
- (C) $1.72
- (D) $10.75
AnswerC — $1.72
Step-by-step- Price per pound = cost ÷ pounds, so find 4.30 ÷ 2.5.
- Move both points one place to the right, so the problem becomes 43 ÷ 25.
- Divide: 43 ÷ 25 = 1.72, so the price is $1.72 per pound.
Fast methodDouble both numbers: 8.60 ÷ 5 = 1.72.
Quick checkCheck: 1.72 × 2.5 = 4.3 ✓.
Why the other choices are wrong- A ($0.58): divided the pounds by the cost: 2.5 ÷ 4.30 is about 0.58
- B ($17.20): moved the point in 4.30 two places but in 2.5 only one: 430 ÷ 25 = 17.2
- D ($10.75): multiplied instead of dividing: 4.30 × 2.5 = 10.75
Dividing decimals in context
Method. To count how many pieces fit, divide the whole length by one piece.
Worked example. A roll of craft wire 7.8 meters long is cut into pieces that are each 0.26 meter long. How many pieces are there?
- (A) 30
- (B) 3
- (C) 300
- (D) 2.028
AnswerA — 30
Step-by-step- Number of pieces = 7.8 ÷ 0.26.
- Move both points two places to the right, so the problem becomes 780 ÷ 26.
- Divide: 780 ÷ 26 = 30 pieces.
Fast methodTen pieces make 2.6 meters, and 7.8 ÷ 2.6 = 3, so there are 3 × 10 = 30 pieces.
Quick checkCheck: 30 × 0.26 = 7.8 ✓.
Why the other choices are wrong- B (3): moved the point one place in 7.8 but two in 0.26: 78 ÷ 26 = 3
- C (300): moved the point three places in 7.8: 7800 ÷ 26 = 300
- D (2.028): multiplied instead of dividing: 7.8 × 0.26 = 2.028