ALEKS PPL questions are open-response: you type the answer. This unit covers function notation, domain and range, operations on functions, transformations, and polynomial and rational functions. Each unit test here is 15 questions with a suggested 30 minutes.
08.01 Function Concepts
ALEKS PPL is a college math placement assessment of at most 25 open-response questions: you type each answer, and there are no answer choices. The ALEKS calculator appears only on questions where it is allowed. This topic covers function notation and evaluation (including piecewise rules), the domain of fractions and square roots, the range and the largest or smallest value of a function, and reading graphs and tables, including average rate of change. Domain and range questions ask for a single value, such as an excluded value or an endpoint, never an inequality. Type numbers as integers, fractions such as 11/3, or decimals, and separate two values with a comma.
A function gives exactly one output for each input, and f(a) means the output of f when the input is a. To evaluate, replace every x with the input in parentheses, then follow the order of operations; parentheses matter most for negative inputs and for inputs such as a + 3. A piecewise function uses a different rule on each part of the domain, so first decide which rule the input belongs to.
Key formulas
Evaluate
f(x)=3x−1⇒f(a)=3a−1
Negative input in parentheses
(−a)2=a2,−a2=−(a2)
Expression as input
f(x+h)means replace every x by (x+h)
Solve f(x) = k
f(x)=k⇒set the rule equal to k and solve for x
Piecewise rule
f(x)={g(x),h(x),x<cx≥c
Evaluate a quadratic
Method. Substitute −2 in parentheses, square first, then multiply and add.
Worked example. Let f(x) = 3x2 − 5x + 2. Find f(−2).
Answer24 (accepted: 24)
Step-by-step
Replace x with (−2): f(−2) = 3(−2)2 − 5(−2) + 2.
Square first: (−2)2 = 4, so 3 × 4 = 12.
Then −5 × (−2) = 10, and 12 + 10 + 2 = 24.
Fast methodPut the negative input in parentheses before squaring.
11: used x2 − 1 at x = 2, so f(2) = 3 and 3 + 8 = 11
13: used 5 − 3x at x = −3, so f(−3) = 14 and −1 + 14 = 13
Domain: Excluded Values and Endpoints
The domain is every input the rule can accept. A fraction is undefined where its denominator is 0, so those x-values are excluded; an even root needs the expression under it to be 0 or more, so the domain starts or stops at the value that makes it 0. Excluded values come from the denominator before any canceling.
Key formulas
Fraction
q(x)p(x):exclude every x with q(x)=0
Square root
u(x):need u(x)≥0
Endpoint of a root
ax+b,a>0:x≥−ab
Canceling keeps the exclusion
(x−c)(x−d)x−c:x=c,x=d
Excluded value of a fraction
Method. Set the denominator equal to 0 and solve.
Worked example. Let h(x) = (x + 4)/(x − 6). Which value of x is excluded from the domain of h?
Answer6 (accepted: 6)
Step-by-step
A fraction is undefined when its denominator is 0.
Set x − 6 = 0, so x = 6.
Fast methodOnly the denominator decides the excluded value.
Quick checkCheck: at x = 6 the denominator is 6 − 6 = 0 ✓.
Common mistakes
−4: set the numerator equal to 0 instead of the denominator
−6: solved x − 6 = 0 with the wrong sign
Endpoint of a root domain
Method. Set the expression under the root to be at least 0 and solve for x.
Worked example. Let f(x) = √(2x − 10). The domain of f is all x greater than or equal to a number c. What is c?
Answer5 (accepted: 5)
Step-by-step
The expression under the root must be 0 or more: 2x − 10 ≥ 0.
Add 10: 2x ≥ 10.
Divide by 2: 10 ÷ 2 = 5, so x ≥ 5 and c = 5.
Fast methodSet the inside equal to 0 to find where the domain starts.
Quick checkCheck: 2 × 5 − 10 = 0, and √0 = 0 is defined ✓.
Common mistakes
10: added 10 but forgot to divide by 2
−5: moved the 10 across without changing its sign
Excluded values of a quadratic denominator
Method. Factor the denominator and set each factor equal to 0.
Worked example. Let g(x) = (x + 1)/(2x2 + 3x − 20). Find every value of x excluded from the domain of g. Type the values separated by a comma (type a fraction in lowest terms, or as a decimal).
−5/2, 4: read the numbers in the factors without changing their signs
−1: set the numerator equal to 0
Range, Maximum and Minimum Values
The range is every output the function produces. For a quadratic in vertex form a(x − h)2 + k, the output k at the vertex is the smallest value when a > 0 and the largest when a < 0. A square root is never negative and an absolute value is never negative, so √(…) + k and |…| + k start at k.
Key formulas
Vertex form
f(x)=a(x−h)2+k:extreme value k
Vertex from standard form
f(x)=ax2+bx+c:x=−2ab
Root shifted
g(x)=x−h+k:smallest output k
Absolute value
y=a∣x−h∣+k:extreme value k
Minimum from vertex form
Method. The squared part is smallest (0) at the vertex, so the minimum is the constant k.
Worked example. Let f(x) = (x − 3)2 + 4. What is the smallest value in the range of f?
Answer4 (accepted: 4)
Step-by-step
A square is never negative, so (x − 3)2 is 0 or more.
The smallest value 0 happens at x = 3, giving f(3) = 0 + 4 = 4.
Fast methodIn a(x − h)2 + k with a > 0, the minimum output is k.
−119: dropped the minus sign in −b/(2a) and used x = −3, h(−3) = −36 − 72 − 11
97: took −4 × 32 as +36, so 36 + 72 − 11 = 97
Graphs, Tables and Average Rate of Change
A point (a, b) on the graph of f means f(a) = b, so reading a graph or a table is reading inputs and outputs. An x-intercept is an input where the output is 0. The average rate of change from x = a to x = b is the change in output divided by the change in input, the slope of the line through the two points.
Key formulas
Point on a graph
(a,b)on the graph⟺f(a)=b
Average rate of change
b−af(b)−f(a)
x-intercept
f(x)=0
Line through two points
m=x2−x1y2−y1,y=y1+m(x−x1)
Parabola symmetry
vertex at x=h:f(h−d)=f(h+d)
Value from a line graph
Method. Find the slope from the two points, write the rule, then evaluate.
Worked example. The graph of f is a straight line through (0, 3) and (4, 11). What is f(6)?
Answer15 (accepted: 15)
Step-by-step
Slope: (11 − 3)/(4 − 0) = 8/4 = 2.
The line starts at 3 when x = 0, so f(x) = 2x + 3.
f(6) = 2 × 6 + 3 = 15.
Fast methodFrom x = 0 to x = 6 the output rises 6 × 2 = 12 above 3.
12: multiplied 6 by the slope 2 and forgot the starting value 3
51: took the slope as 8, forgetting to divide by the run 4, so 3 + 48
Average rate of change
Method. Evaluate at both ends, then divide the change in f by the change in x.
Worked example. Let f(x) = x2 + 2x. Find the average rate of change of f from x = 1 to x = 4.
Answer7 (accepted: 7)
Step-by-step
f(4) = 16 + 8 = 24 and f(1) = 1 + 2 = 3.
Change in output: 24 − 3 = 21; change in input: 4 − 1 = 3.
Average rate of change: 21 ÷ 3 = 7.
Fast methodRise over run between the two points on the graph.
Quick checkCheck: 3 + 7 × 3 = 24 = f(4) ✓.
Common mistakes
21: found the change in output but did not divide by the change in input
1/7: divided the change in input by the change in output
x-intercept from a graph described in words
Method. Pick the segment that crosses the x-axis, write its rule, and set it equal to 0.
Worked example. The graph of g is made of two straight segments: one from (−4, −2) to (1, 6), and one from (1, 6) to (5, −3). What is the larger x-intercept of the graph? Give your answer as a fraction in lowest terms.
Answer11/3 (accepted: 11/3)
Step-by-step
The larger x-intercept is on the segment from (1, 6) to (5, −3), where the output falls from 6 to −3.
Slope: (−3 − 6)/(5 − 1) = −9/4, so on this segment g(x) = 6 − (9/4)(x − 1).
Set g(x) = 0: (9/4)(x − 1) = 6, so x − 1 = 24/9 = 8/3 and x = 11/3.
Fast methodFrom x = 1 the output must drop 6 at a rate of 9/4 per unit: 6 ÷ (9/4) = 8/3 units.
Quick checkCheck: 6 − (9/4)(8/3) = 6 − 6 = 0 ✓.
Common mistakes
8/3: found the distance from x = 1 but did not add it to 1
5: gave the end of the segment instead of where it crosses the x-axis
08.02 Operations and Transformations
ALEKS PPL is a college math placement assessment of at most 25 open-response questions: you type each answer, and there are no answer choices. The ALEKS calculator appears only on questions where it is allowed. This topic covers combining functions by adding, subtracting, multiplying and dividing them, composition of functions, inverse functions, and shifting, reflecting and stretching graphs. Answers are values such as (f∘g)(3), or expressions in x such as an inverse or a transformed function; type |x| as abs(x).
Adding, Subtracting, Multiplying and Dividing Functions
Two functions combine point by point: (f + g)(x) is f(x) + g(x), and the same goes for −, × and ÷. To find a value such as (f + g)(2), find f(2) and g(2) first and then combine them. A quotient f/g is undefined wherever g(x) = 0, so those x-values are excluded from its domain.
Key formulas
Sum and difference
(f±g)(x)=f(x)±g(x)
Product
(fg)(x)=f(x)⋅g(x)
Quotient
(gf)(x)=g(x)f(x),g(x)=0
Excluded values of a quotient
solve g(x)=0
Sum of functions at a value
Method. Find f(2) and g(2) separately, then add the two outputs.
Worked example. Let f(x) = 3x + 4 and g(x) = x2 − 1. Find (f + g)(2).
Method. Multiply the two binomials and collect like terms.
Worked example. Let f(x) = 2x − 5 and g(x) = x + 3. When (fg)(x) is written as ax2 + bx + c, what is b?
Answer1 (accepted: 1)
Step-by-step
(fg)(x) = (2x − 5)(x + 3).
Multiply out: 2x2 + 6x − 5x − 15.
Combine like terms: 2x2 + x − 15, so b = 1.
Fast methodUse FOIL on the two binomials: the middle terms are 6x and −5x.
Quick checkCheck at x = 1: f(1) × g(1) = (−3) × 4 = −12, and 2 + 1 − 15 = −12 ✓.
Common mistakes
0: multiplied only the first terms and the last terms, 2x2 − 15
11: took the middle terms as 6x + 5x, losing the minus sign on the 5
Excluded value of a quotient
Method. Set the denominator g(x) equal to zero and solve.
Worked example. Let f(x) = x + 6 and g(x) = 2x − 8. What value of x is excluded from the domain of (f/g)(x)?
Answer4 (accepted: 4)
Step-by-step
(f/g)(x) = (x + 6)/(2x − 8) is undefined when the denominator is 0.
Solve 2x − 8 = 0: 2x = 8, so x = 4.
Fast methodOnly the denominator g decides the excluded value.
Quick checkCheck: g(4) = 2 × 4 − 8 = 0 ✓.
Common mistakes
−6: set the numerator equal to zero instead of the denominator
−4: solved 2x − 8 = 0 as 2x = −8
8: used the constant 8 without dividing by 2
Composition of Functions
The composition (f∘g)(x) means f(g(x)): put x into g first, then put the result into f. To find a value, work from the inside out. To find the expression, replace every x in f with the whole expression g(x), in parentheses. In general f∘g and g∘f are different.
Key formulas
Definition
(f∘g)(x)=f(g(x))
A value, inside out
(f∘g)(a)=f(g(a))
Order matters
f∘g=g∘f in general
Composition at a value
Method. Evaluate the inner function g at 6, then put that output into f.
Worked example. Let f(x) = x2 + 1 and g(x) = x − 3. Find (f∘g)(6).
34: worked in the wrong order: f(6) = 37, then g(37) = 34
3: found g(6) and stopped
Composition as an expression
Method. Substitute the whole of g(x), in parentheses, for x in f.
Worked example. Let f(x) = 4x − 1 and g(x) = x + 2. Then (f∘g)(x) = 4x + c. What is c?
Answer7 (accepted: 7)
Step-by-step
(f∘g)(x) = f(x + 2) = 4(x + 2) − 1.
Distribute: 4x + 8 − 1 = 4x + 7, so c = 7.
Fast methodReplace x in f with (x + 2).
Quick checkCheck at x = 0: g(0) = 2 and f(2) = 7; 4 × 0 + 7 = 7 ✓.
Common mistakes
1: worked in the wrong order: g(f(x)) = 4x − 1 + 2
8: multiplied out 4(x + 2) but dropped the − 1
Order of composition
Method. Read g∘f as g of f: the outer function is the one written first.
Worked example. Let f(x) = x2 and g(x) = 3x − 2. Find (g∘f)(2) − (f∘g)(2).
Answer−6 (accepted: -6)
Step-by-step
(g∘f)(2) = g(f(2)) = g(4) = 3 × 4 − 2 = 10.
(f∘g)(2) = f(g(2)) = f(4) = 42 = 16.
So (g∘f)(2) − (f∘g)(2) = 10 − 16 = −6.
Fast methodWork each composition from the inside out; the two orders give different values.
Quick checkCheck: (g∘f)(x) = 3x2 − 2 gives 3 × 4 − 2 = 10 at x = 2, and (f∘g)(x) = (3x − 2)2 gives 42 = 16 ✓.
Common mistakes
6: subtracted in the opposite order, 16 − 10
0: assumed g∘f and f∘g are the same function, so the difference is 0
Inverse Functions
The inverse f−1 undoes f: if f(a) = b, then f−1(b) = a. To find f−1(x), write y = f(x), swap x and y, and solve for y. To find one value f−1(b), solve f(x) = b, or read a table backwards. The −1 is not an exponent: f−1(x) is not 1/f(x).
Key formulas
Meaning
f(a)=b⟺f−1(b)=a
Finding the inverse
y=f(x)→swap x and y→solve for y
Inverses undo each other
f(f−1(x))=x,f−1(f(x))=x
Not a reciprocal
f−1(x)=f(x)1
Inverse of a linear function
Method. Swap x and y, then solve for y.
Worked example. Let f(x) = 5x − 3. Find f−1(x). Type only the expression in x (no "f−1(x) =").
Answer(x+3)/5 (accepted: (x+3)/5, x/5+3/5)
Step-by-step
Write y = 5x − 3 and swap x and y: x = 5y − 3.
Add 3: x + 3 = 5y.
Divide by 5: y = (x + 3)/5.
Fast methodUndo the steps of f in reverse order: add 3, then divide by 5.
(3x − 1)/(x − 2): moved the 1 across without changing its sign
Transformations of Graphs
A change outside the function moves the graph up or down; a change inside moves it left or right, the opposite way to the sign: f(x − 3) moves 3 units right. A minus sign outside, −f(x), reflects over the x-axis; f(−x) reflects over the y-axis; a f(x) with a > 1 stretches the graph vertically. A point (p, q) on y = f(x) moves to (p + h, a q + k) on y = a f(x − h) + k.
Key formulas
Vertical shift
y=f(x)+k:up k(down if k<0)
Horizontal shift
y=f(x−h):right h(left if h<0)
Reflections
y=−f(x):over the x-axis;y=f(−x):over the y-axis
Vertical stretch
y=af(x),a>1
Where a point goes
(p,q)→(p+h,aq+k) on y=af(x−h)+k
Shifting a parabola
Method. Put the horizontal shift inside the square and the vertical shift outside.
Worked example. The graph of f(x) = x2 is shifted 4 units right and 3 units down. Write the function of the new graph. Type only the expression in x (no "g(x) =").
Answer(x-4)^2-3 (accepted: (x-4)^2-3, x^2-8x+13)
Step-by-step
A shift 4 units right replaces x with x − 4: (x − 4)2.
A shift 3 units down subtracts 3: (x − 4)2 − 3.
Fast methodRight means x − h inside; down means − k outside.
Quick checkCheck: the vertex moves from (0, 0) to (4, −3), and (4 − 4)2 − 3 = −3 ✓.
Common mistakes
(x + 4)2 − 3: used x + 4 for a shift to the right
(x − 4)2 + 3: moved the graph up instead of down
Image of a point
Method. A change inside the parentheses moves x the opposite way to its sign.
Worked example. The point (2, 5) is on the graph of y = f(x). What is the x-coordinate of the matching point on the graph of y = f(x + 3) − 1?
Answer−1 (accepted: -1)
Step-by-step
f(x + 3) moves the graph 3 units left: 2 − 3 = −1.
The − 1 outside changes only the y-coordinate (5 − 1 = 4), so the point is (−1, 4).
Fast methodInside changes x, the opposite way to the sign.
4: gave the y-coordinate of the matching point, 5 − 1 = 4, instead of its x-coordinate
Reflect, stretch and shift
Method. Build the function one step at a time in the order given.
Worked example. The graph of y = |x| is reflected over the x-axis, then stretched vertically by a factor of 3, then shifted 2 units up. Write the function of the new graph. Type |x| as abs(x). Type only the expression in x (no "g(x) =").
Fast methodApply the steps in the order given; the shift up comes last, so it is not multiplied by 3.
Quick checkCheck: the vertex is at (0, 2), and −3|0| + 2 = 2 ✓.
Common mistakes
3abs(x) + 2: left out the reflection
−3abs(x) − 6: reflected and stretched after adding 2, giving −3(abs(x) + 2)
08.03 Polynomial and Rational Functions
ALEKS PPL is a college math placement assessment of at most 25 open-response questions: you type each answer, and there are no answer choices. The ALEKS calculator appears only on questions where it is allowed. This topic covers polynomial and rational functions: zeros, intercepts and multiplicity, degree and end behavior, polynomial division with the Remainder and Factor Theorems, and the asymptotes, holes and intercepts of rational functions. Graphs are described in words. Type a list of zeros with commas, such as 12, -1, and an asymptote as the number in its equation.
A zero of a polynomial f is an x-value where f(x) = 0; on the graph it is an x-intercept. When f is written as a product of factors, each factor (x − a) gives the zero x = a, and a factor that appears m times gives a zero of multiplicity m. At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches the axis and turns back. The y-intercept is always f(0).
Key formulas
Zero product property
(x−a)(x−b)=0⇒x=a or x=b
y-intercept
y-intercept=f(0)
Multiplicity
(x−a)m is a factor⇒x=a has multiplicity m
Crossing or touching
m odd: crosses,m even: touches
Zeros from factored form
Method. Set each factor equal to zero and solve.
Worked example. Find all the zeros of f(x) = (x − 4)(x + 7). Give the x-values separated by a comma.
Answer4, -7 (accepted: 4, -7, -7, 4)
Step-by-step
Set each factor equal to 0: x − 4 = 0 or x + 7 = 0.
Solve each one: x = 4 or x = −7.
Fast methodEach factor (x − a) gives the zero x = a, so change the sign of the number in each pair of parentheses.
Method. Factor completely; the power on the factor is the multiplicity.
Worked example. The polynomial f(x) = x4 − 6x3 + 9x2 has a zero at x = 3. What is the multiplicity of this zero?
Answer2 (accepted: 2)
Step-by-step
Take out the common factor x2: f(x) = x2(x2 − 6x + 9).
The quadratic is a perfect square: x2 − 6x + 9 = (x − 3)2.
So f(x) = x2(x − 3)2, and the factor (x − 3) appears 2 times.
Fast methodFactor completely and read the power on (x − 3).
Quick checkCheck: (x − 3)2 = x2 − 6x + 9, and x2 times it gives x4 − 6x3 + 9x2 ✓.
Common mistakes
1: counted the zero once without factoring completely
4: gave the degree of the whole polynomial
Degree and End Behavior
The degree of a polynomial is its highest power of x, and the leading coefficient is the number in front of that term. A polynomial of degree n has at most n real zeros and at most n − 1 turning points. The ends of the graph follow the leading term: for even degree both ends point the same way (up if the leading coefficient is positive), and for odd degree the ends point opposite ways.
Key formulas
Leading term
f(x)=anxn+⋯+a0,an=0
Real zeros
at most n real zeros
Turning points
at most n−1 turning points
Even degree
an>0: both ends up,an<0: both ends down
Odd degree
an>0: down on the left, up on the right
Degree of a polynomial
Method. Find the highest power of x in any term.
Worked example. What is the degree of f(x) = 5x2 − 2x4 + x − 9?
Answer4 (accepted: 4)
Step-by-step
Look at every power of x: 2, 4, 1 and 0.
The highest power is 4, so the degree is 4.
Fast methodThe degree is the highest power, wherever it is written.
Quick checkCheck: the term −2x4 has the largest power, 4 ✓.
Common mistakes
2: used the power of the first term written
−2: gave the leading coefficient instead of the degree
Leading coefficient of a product
Method. Multiply the leading coefficients of all the factors.
Worked example. What is the leading coefficient of f(x) = −3(x − 1)2(2x + 5) when it is multiplied out?
Answer−6 (accepted: -6)
Step-by-step
The leading term comes from the leading term of each factor: −3, x2 from (x − 1)2, and 2x.
Multiply the coefficients: −3 × 1 × 2 = −6, so the leading term is −6x3.
Fast methodMultiply only the leading coefficients of the factors.
Quick checkCheck: −3 × 2 = −6 ✓.
Common mistakes
−3: ignored the 2 in (2x + 5)
6: dropped the minus sign of the −3
Greatest number of turning points
Method. Subtract 1 from the degree.
Worked example. What is the greatest number of turning points the graph of f(x) = x5 − 4x3 + 2 can have?
Answer4 (accepted: 4)
Step-by-step
The degree is 5.
A polynomial of degree n has at most n − 1 turning points: 5 − 1 = 4.
Fast methodTurning points: at most one fewer than the degree.
Quick checkCheck: 4 + 1 = 5, the degree ✓.
Common mistakes
5: used the degree itself
3: used the second-highest power
Division, Remainder and Factor Theorems
Dividing a polynomial f(x) by (x − a) gives a quotient q(x) and a remainder r, with f(x) = (x − a)q(x) + r. The Remainder Theorem says the remainder is f(a), so you can find it by substituting. The Factor Theorem says (x − a) is a factor exactly when f(a) = 0. Synthetic division with the number a gives the quotient quickly; write a 0 for any missing power.
Key formulas
Division statement
f(x)=(x−a)q(x)+r
Remainder Theorem
r=f(a)
Factor Theorem
(x−a) is a factor⟺f(a)=0
Dividing by (x + a)
x+a=x−(−a)⇒use −a
Remainder Theorem
Method. The remainder on division by (x − a) is f(a).
Worked example. What is the remainder when f(x) = x3 − 2x2 + 5x − 1 is divided by (x − 3)?
Answer23 (accepted: 23)
Step-by-step
By the Remainder Theorem the remainder is f(3).
f(3) = 27 − 18 + 15 − 1 = 23.
Fast methodSubstitute the number that makes the divisor zero.
4: used 1 instead of −1 in synthetic division (bottom row 3, 4, −4)
1: divided each term by x and dropped the constant, giving 3x2 + x − 8
Factor Theorem with a constant
Method. Set f(2) = 0 and solve for k.
Worked example. For what value of k is (x − 2) a factor of f(x) = x3 + kx2 − 5x + 6?
Answer−1 (accepted: -1)
Step-by-step
By the Factor Theorem, f(2) = 0.
f(2) = 8 + 4k − 10 + 6 = 4k + 4.
Solve 4k + 4 = 0: 4k = −4, so k = −1.
Fast methodSubstitute x = 2, set the result to 0 and solve for k.
Quick checkCheck: with k = −1, f(2) = 8 − 4 − 10 + 6 = 0 ✓.
Common mistakes
1: moved the 4 across without changing its sign
−2: substituted x = −2 instead of x = 2
Rational Functions
A rational function is a fraction of two polynomials. Factor both first: a factor that cancels gives a hole, and a zero of the denominator that remains gives a vertical asymptote. The horizontal asymptote depends on the degrees: y = 0 when the top has lower degree, the ratio of leading coefficients when the degrees are equal, and a slant line from long division when the top is one degree higher. The y-intercept is f(0) and the x-intercepts are the zeros of the numerator that do not cancel.
Key formulas
Vertical asymptote
q(a)=0 after canceling⇒x=a
Hole
(x−a)q(x)(x−a)p(x)⇒hole at x=a
Equal degrees
y=leading coefficient of bottomleading coefficient of top
Lower degree on top
y=0
Slant asymptote
deg(top)=deg(bottom)+1⇒y=quotient
Vertical asymptote
Method. Find where the denominator is zero and the numerator is not.
Worked example. The graph of f(x) = (x + 5)/(x − 3) has one vertical asymptote. What is its x-value?
Answer3 (accepted: 3)
Step-by-step
The denominator is zero when x − 3 = 0, so x = 3.
At x = 3 the numerator is 3 + 5 = 8, not 0, so nothing cancels and x = 3 is an asymptote.
Fast methodSet the denominator equal to zero.
Quick checkCheck: 3 − 3 = 0 and 3 + 5 = 8 ✓.
Common mistakes
−5: set the numerator equal to zero instead
−3: changed the sign of the 3
Horizontal asymptote, equal degrees
Method. Compare degrees; equal degrees give the ratio of leading coefficients.
Worked example. What is the y-value of the horizontal asymptote of f(x) = (6x2 − 1)/(3x2 + 4x)?
Answer2 (accepted: 2)
Step-by-step
The top and bottom both have degree 2.
The asymptote is the ratio of the leading coefficients: 6 ÷ 3 = 2, so y = 2.
Fast methodEqual degrees: divide the leading coefficients.
Quick checkCheck: 3 × 2 = 6 ✓.
Common mistakes
0: used y = 0, which is only for a lower degree on top
1/2: divided the bottom coefficient by the top one
Hole in a rational graph
Method. Cancel the common factor and evaluate the simplified function at its zero.
Worked example. The graph of f(x) = (x2 − 4)/(x2 + x − 6) has a hole. What is the y-coordinate of the hole? Give your answer as a fraction in lowest terms.
Answer4/5 (accepted: 4/5, 0.8)
Step-by-step
Factor: f(x) = (x − 2)(x + 2)/((x − 2)(x + 3)).
The factor (x − 2) cancels, so the hole is at x = 2 and f(x) = (x + 2)/(x + 3) elsewhere.
Put x = 2 into the simplified form: (2 + 2)/(2 + 3) = 4/5.
Fast methodCancel the common factor, then substitute its zero into what is left.
Quick checkCheck: 2 + 2 = 4 and 2 + 3 = 5, so the y-value is 4/5 ✓.
Common mistakes
2/3: put x = 0 into the simplified form instead of x = 2