CLT · Quantitative Reasoning · Unit 01 Algebra

Algebra: Unit Study Guide

01.01 Expressions and Equations

Algebra is about a third of the CLT Quantitative Reasoning section (40 questions in 45 minutes, no calculator). This topic covers simplifying expressions and solving linear, quadratic, rational, radical and absolute-value equations, inequalities and systems, often inside word problems. Work cleanly by hand and check answers by substituting.

Linear Equations

Undo operations in reverse order, doing the same thing to both sides. Clear fractions first by multiplying by the common denominator, and check by substituting.

Key formulas
Inverse operations
Clearing fractions
Literal equations
No solution / all reals

Variables on both sides

Method. Collect x-terms on one side and numbers on the other; then divide.

Worked example
Solve for x: 21x + 38 = 2x − 38
A−4
B−
C0
D4
AnswerA — −4
Step-by-step
  1. Subtract 2x from both sides: 19x + 38 = −38.
  2. Subtract 38: 19x = −76.
  3. Divide by 19: x = −4.
Quick checkleft side 21(−4) + 38 = −46; right side 2(−4) − 38 = −46.
Common mistakes
  • B (−): added the x-terms instead of subtracting
  • C (0): added the constants instead of subtracting
  • D (4): made a sign error moving the constants

Equations with decimals

Method. Multiply every term by 10 to clear the decimals, then solve.

Worked example
Solve for x: 1.5x + 3.4 = −34.1
A−250
B−56.25
C−37.5
D−25
AnswerD — −25
Step-by-step
  1. Subtract 3.4: 1.5x = −37.5.
  2. Divide by 1.5: x = −25.
Quick check1.5 × (−25) + 3.4 = −37.5 + 3.4 = −34.1.
Common mistakes
  • A (−250): misplaced the decimal point when dividing (one place too far right)
  • B (−56.25): multiplied by the coefficient instead of dividing
  • C (−37.5): forgot to divide by the coefficient

Multi-step equations — combining like terms

Method. Distribute, combine like terms on each side, then solve the two-step equation.

Worked example
Solve for x: 8(x − 9) + 9x − 2 = −142
A−
B−
C−4
D68
AnswerC — −4
Step-by-step
  1. Distribute: 8x − 72 + 9x − 2 = −142.
  2. Combine like terms: 17x − 74 = −142.
  3. So 17x = −68 and x = −4.
Quick check8(−4 − 9) − 36 − 2 = −104 − 36 − 2 = −142.
Common mistakes
  • A (−): did not combine the x-terms
  • B (−): multiplied only x by 8
  • D (68): subtracted the x-terms instead of adding

Literal equations

Method. Undo the last operation done to r first (inverse operations).

Worked example
The formula A = P + Prt is solved for r. Which equation is correct?
Ar = − P
Br =
Cr =
Dr =
AnswerD — r =
Step-by-step
  1. Isolate r by undoing each operation on it in reverse order.
  2. r = .
Quick checksubstitute for r in A = P + Prt; the equation becomes an identity.
Common mistakes
  • A (r = − P): divided before subtracting P
  • B (r = ): forgot to divide by P
  • C (r = ): added P instead of subtracting

Solving for an expression

Method. No need to find x: 15x + 25 = 3(5x + 6) + 7 = 3(36) + 7 = 115.

Worked example
If 5x + 6 = 36, what is the value of 15x + 25?
A6
B90
C108
D115
AnswerD — 115
Step-by-step
  1. x = = 6.
  2. Then 15x + 25 = 15(6) + 25 = 115.
Quick checkwith x = 6, 5x + 6 = 36 ✓ and 15x + 25 = 115.
Common mistakes
  • A (6): gave x instead of the value of the expression
  • B (90): left out the constant term
  • C (108): forgot the change to the constant (multiplied the equation by 3 only)

Equations from word problems — consecutive integers

Method. The average −41 is the middle of the list; count up from it in steps of 2.

Worked example
The sum of 3 consecutive odd integers is −123. What is the largest of these odd integers?
A−43
B−41
C−40
D−39
AnswerD — −39
Step-by-step
  1. Let the smallest be n: n + (n + 2) + (n + 4) = −123.
  2. So 3n + 6 = −123 and n = −43.
  3. The numbers are −43, −41, −39.
  4. The largest is −39.
Quick check(−43) + (−41) + (−39) = −123, and the numbers are consecutive odd integers.
Common mistakes
  • A (−43): gave the smallest number
  • B (−41): gave the middle (average) value
  • C (−40): used steps of 1 instead of 2

Equations from word problems — ages

Method. Take away the difference and share equally: (57 − 11) ÷ 2 = 23 for Leo; add 11 for Maya.

Worked example
Maya is 11 years older than Leo. The sum of their ages is 57. How old is Maya?
A34
B45
C46
D68
AnswerA — 34
Step-by-step
  1. Let Leo be L.
  2. Then Maya is L + 11, and L + (L + 11) = 57.
  3. So 2L = 46 and L = 23.
  4. Maya is 34.
Quick check23 + 34 = 57 and 34 − 23 = 11.
Common mistakes
  • B (45): added the difference twice
  • C (46): forgot to divide by 2
  • D (68): added the difference to the sum (57 + 11) and did not divide by 2

Equations from word problems — perimeter

Method. Half the perimeter is length + width = 72: 3w − 9 = 72, so w = 27.

Worked example
The length of a rectangle is 2 times its width minus 9 cm. The perimeter is 144 cm. What is the length, in cm?
A27
B45
C72
D93
AnswerB — 45
Step-by-step
  1. Let the width be w.
  2. Length = 2w − 9.
  3. Perimeter: 2w + 2(2w − 9) = 144.
  4. So 6w − 18 = 144 and w = 27.
  5. Length = 45.
Quick check2(45) + 2(27) = 144.
Common mistakes
  • A (27): gave the width
  • C (72): gave half the perimeter
  • D (93): used the perimeter as one length plus one width

Number of solutions

Method. Compare x-coefficients first, then constants.

Worked example
Which equation has infinitely many solutions?
A3(x + 3) = 3x + 10
B3(x + 3) = 2x + 8
C3(x + 3) = 3x + 8
D3(x + 3) = 3x + 9
AnswerD — 3(x + 3) = 3x + 9
Step-by-step
  1. Distribute the left side to get 3x + 9.
  2. Equal x-coefficients with different constants give no solution.
  3. Identical sides give infinitely many.
  4. Different x-coefficients give exactly one.
  5. 3(x + 3) = 3x + 9 has infinitely many solutions.
Quick checksubtracting 3x from both sides of 3(x + 3) = 3x + 9 leaves a true statement (0 = 0).
Common mistakes
  • A (3(x + 3) = 3x + 10): chose an equation that has no solution
  • B (3(x + 3) = 2x + 8): chose an equation that has exactly one solution
  • C (3(x + 3) = 3x + 8): chose an equation that has no solution

Parameters — no solution

Method. No solution ⇔ same x-coefficient on both sides and different constants.

Worked example
For what value of k does the equation kx − 4 = 8x − 3 have no solution?
A−8
B0
C1
D8
AnswerD — 8
Step-by-step
  1. Collect x-terms: (k − 8)x = 1.
  2. Since 1 ≠ 0, there is no solution exactly when the x-coefficient is 0: k = 8.
Quick checkwith k = 8 the equation is 8x − 4 = 8x − 3, which simplifies to −4 = −3, false.
Common mistakes
  • A (−8): changed the sign of the coefficient
  • B (0): thought k = 0 makes the equation have no solution
  • C (1): set k equal to the difference of the constants

Parameters — infinitely many solutions

Method. Infinitely many solutions ⇔ both sides are the same expression; match the constants.

Worked example
In the equation 5(x + 2) + 15 = 5x + m, m is a constant. If the equation has infinitely many solutions, what is the value of m?
A−25
B−5
C17
D25
AnswerD — 25
Step-by-step
  1. Distribute: 5x + 25 = 5x + m.
  2. The x-terms already match.
  3. So the equation is true for every x exactly when the constants match: m = 10 + 15 = 25.
Quick checkwith m = 25 both sides are 5x + 25.
Common mistakes
  • A (−25): changed the sign of the answer
  • B (−5): used the wrong sign for the constant
  • C (17): did not multiply 2 by 5

Parameters — matching coefficients

Method. Identical sides: match the x-coefficients and the constants.

Worked example
The equation 12(x + 3) + 9 = ax + b has infinitely many solutions, where a and b are constants. What is a + b?
A−33
B24
C45
D57
AnswerD — 57
Step-by-step
  1. Distribute the left side: 12x + 45.
  2. For the equation to hold for every x, the coefficients and the constants must match: a = 12 and b = 45.
  3. So a + b = 57.
Quick checkwith a = 12 and b = 45, both sides are 12x + 45.
Common mistakes
  • A (−33): subtracted b instead of adding
  • B (24): did not multiply 3 by 12
  • C (45): gave only b

Parameters — find k

Method. Divide both sides by 4 first: 3x − k = 3x + 3, so −k = 3 and k = −3.

Worked example
For what value of k does the equation 4(3x − k) = 12x + 12 have infinitely many solutions?
A−3
B−1
C3
D12
AnswerA — −3
Step-by-step
  1. Distribute: 12x − 4k = 12x + 12.
  2. The x-terms match.
  3. So the constants must too: −4k = 12.
  4. So k = −3.
Quick checkwith k = −3 the left side is 4(3x + 3) = 12x + 12, the same as the right side.
Common mistakes
  • B (−1): divided by both 4 and 3
  • C (3): made a sign error
  • D (12): used the right-side constant as k

Solving equations with letters

Method. Treat the letters as numbers and undo each operation in reverse order.

Worked example
Solve ax − b = cx + d for x, where a, b, c and d are constants (a ≠ c).
Ax =
Bx =
Cx =
Dx =
AnswerA — x =
Step-by-step
  1. Use the same steps as with numbers: collect the x-terms, move the constants.
  2. Then divide (or multiply) to isolate x.
  3. Result: x = .
Quick checksubstitute for x in ax − b = cx + d; both sides simplify to the same expression.
Common mistakes
  • B (x = ): subtracted b instead of adding it
  • C (x = ): added the x-coefficients instead of subtracting
  • D (x = ): subtracted the x-coefficients in the wrong order

Linear models — when are two costs equal?

Method. Difference in fixed fees ÷ difference in rates = 27 ÷ 0.9 = 30.

Worked example
Taxi company A charges $31.00 plus $2.70 per mile. Taxi company B charges $58.00 plus $1.80 per mile. For how many miles do the two cost the same?
A6
B10
C15
D30
AnswerD — 30
Step-by-step
  1. Set the costs equal: 31 + 2.7m = 58 + 1.8m.
  2. Then (2.7 − 1.8)m = 58 − 31.
  3. So 0.9m = 27 and m = 30.
Quick checkA costs $112.00 and B costs $112.00 at 30 miles.
Common mistakes
  • A (6): added the per-unit rates instead of subtracting
  • B (10): divided by A's per-unit rate only
  • C (15): divided by B's per-unit rate only

Polynomial Expressions

Combine like terms, distribute, and use the special-product patterns. Factor by pulling out the GCF first, then look for patterns.

Key formulas
Square of a sum
Square of a difference
Difference of squares
Sum/difference of cubes
FOIL
Remainder and factor theorems

Distributive property

Method. Multiply the outside number by EVERY term inside, keeping the sign of the outside number.

Worked example
Simplify: 4(−6x + 4) + 3(−8x − 9)
A−48x + 7
B43
C−48x − 11
D−48x − 23
AnswerC — −48x − 11
Step-by-step
  1. Distribute: 4(−6x + 4) = −24x + 16 and 3(−8x − 9) = −24x − 27.
  2. Combine: −48x − 11.
Quick checkat x = 1 the original gives −59 and −48x − 11 gives −59.
Common mistakes
  • A (−48x + 7): multiplied only the first term in the second parentheses by 3
  • B (43): subtracted the second product instead of adding
  • D (−48x − 23): multiplied only the first term in the first parentheses by 4

Adding and subtracting polynomials

Method. Line up like terms (, x, constants); with subtraction, change every sign in the second polynomial.

Worked example
Simplify: −
A−6x − 1
B−10 − 6x − 1
C11
D4x + 7
AnswerD — 4x + 7
Step-by-step
  1. Distribute the minus sign to every term of the second polynomial.
  2. Then combine like terms: 4x + 7.
Quick checkat x = 1 the original gives −3 − (−14) = 11, and 4x + 7 gives 11.
Common mistakes
  • A (−6x − 1): changed the sign of only the first term of the second polynomial
  • B (−10 − 6x − 1): added instead of subtracting
  • C (11): combined the x-terms with the constants

Multiplying binomials

Method. First, Outer, Inner, Last — then combine the two middle terms.

Worked example
Expand: (5x − 3)(4x − 3)
A20 + 9
B20 − 27x + 9
C20 − 3x + 9
D20 − 27x − 9
AnswerB — 20 − 27x + 9
Step-by-step
  1. FOIL: first 5x·4x = 20.
  2. Outer 5x·(−3) = −15x.
  3. Inner −3·4x = −12x.
  4. Last −3·(−3) = 9.
  5. Total: 20 − 27x + 9.
Quick checkCheck with x = 1: (2)(1) = 2 and 20(1) − 27(1) + 9 = 2.
Common mistakes
  • A (20 + 9): multiplied only the first terms and the last terms
  • C (20 − 3x + 9): subtracted the outer and inner products
  • D (20 − 27x − 9): made a sign error on the last term

Special products

Method. Use the patterns = ± 2pq + and (p + q)(p − q) = − .

Worked example
Expand:
A + 16
B − 8x + 16
C − 4x + 16
D + 8x + 16
AnswerB — − 8x + 16
Step-by-step
  1. = + 2pq + with p = x, q = −4.
  2. + 2(x)(−4) + 16 = − 8x + 16.
Quick checkat x = 1 the original gives 9 and − 8x + 16 gives 9.
Common mistakes
  • A ( + 16): squared each term and forgot the middle term
  • C ( − 4x + 16): used ab instead of 2ab for the middle term
  • D ( + 8x + 16): used the wrong sign for the middle term

Factoring — greatest common factor

Method. Find the largest number and the lowest power of x that divide every term.

Worked example
Factor completely: 20 + 24 − 8x
A4
B4x
C4(5x + 6)
D4x
AnswerB — 4x
Step-by-step
  1. Every term contains 4x: 20 + 24 − 8x = 4x.
  2. The trinomial 5 + 6x − 2 has no common factor left.
Quick checkdistribute 4x back to get 20 + 24 − 8x.
Common mistakes
  • A (4): factored out only the number, not the variable
  • C (4(5x + 6)): factored 4 out of the first two terms only and dropped the −8x term
  • D (4x): did not divide the last term by 4

Factoring trinomials (leading coefficient 1)

Method. Product = c, sum = b; the signs of c and b tell you the signs of the two numbers.

Worked example
Factor: − 11x + 30
A(x + 6)(x + 5)
B(x − 6)(x + 5)
C(x − 6)(x − 5)
D(x − 10)(x − 3)
AnswerC — (x − 6)(x − 5)
Step-by-step
  1. Find two numbers with product 30 and sum −11: −6 and −5.
  2. So − 11x + 30 = (x − 6)(x − 5).
Quick check(x − 6)(x − 5) = + (−6 + (−5))x + (−6)(−5) = − 11x + 30.
Common mistakes
  • A ((x + 6)(x + 5)): used the wrong signs in both factors
  • B ((x − 6)(x + 5)): used the wrong sign in one factor
  • D ((x − 10)(x − 3)): chose a factor pair of 30 that does not add to −11

Factoring — difference of squares

Method. − = (p + q)(p − q); take out any common factor first.

Worked example
Factor completely: 75 − 108
A3(5x − 6)(5x − 6)
B3(5x + 6)(5x − 6)
C3(5x + 6)(5x + 6)
D3(25x + 6)(x − 6)
AnswerB — 3(5x + 6)(5x − 6)
Step-by-step
  1. Take out the common factor 3: 3.
  2. 25 − 36 = − .
  3. So it factors as (5x + 6)(5x − 6).
Quick check(5x + 6)(5x − 6) = 25 − 36, times 3 gives 75 − 108.
Common mistakes
  • A (3(5x − 6)(5x − 6)): wrote a perfect square instead of a difference of squares
  • C (3(5x + 6)(5x + 6)): used + in both factors
  • D (3(25x + 6)(x − 6)): did not take the square root of the coefficient

Factoring trinomials (leading coefficient ≠ 1)

Method. Check the outer and inner products of each candidate against the middle coefficient.

Worked example
Factor: 6 − x − 7
A(6x + 1)(x − 7)
B(6x − 7)(x + 1)
C(6x + 7)(x − 1)
D(6x − 7)(x − 1)
AnswerB — (6x − 7)(x + 1)
Step-by-step
  1. Use the ac-method: a·c = -42.
  2. Find two numbers with product -42 and sum -1: 6 and -7.
  3. Split the middle term and group: 6 − x − 7 = (6x − 7)(x + 1).
Quick checkouter 6·1 + inner −7·1 = 6 + (−7) = −1 ✓.
Common mistakes
  • A ((6x + 1)(x − 7)): placed the constants in the wrong factors
  • C ((6x + 7)(x − 1)): used the wrong signs in both factors
  • D ((6x − 7)(x − 1)): used the wrong sign in one factor

Factoring by grouping

Method. Pair the terms, factor each pair, then factor out the common binomial.

Worked example
Factor: 2 + − 12x − 6
A(2x − 1)
B(2x + 1)
C(2x + 1)
D(2x + 1)(x − 6)
AnswerC — (2x + 1)
Step-by-step
  1. Group the first two terms and the last two terms: + (−12x − 6).
  2. Factor out of the first group and −6 out of the second: (2x + 1) − 6(2x + 1).
  3. Factor out the common binomial (2x + 1): (2x + 1).
Quick check(2x + 1) expands to 2 + − 12x − 6.
Common mistakes
  • A ((2x − 1)): made a sign error when factoring the first group
  • B ((2x + 1)): made a sign error when factoring the second group
  • D ((2x + 1)(x − 6)): wrote x instead of in the common factor

Factoring — sum and difference of cubes

Method. SOAP: Same sign, Opposite sign, Always Positive.

Worked example
Factor: 27 + 1
A(3x + 1)
B(3x − 1)
C(3x + 1)
D(3x + 1)
AnswerD — (3x + 1)
Step-by-step
  1. 27 + 1 = + .
  2. Use + = (p + q): (3x + 1).
Quick check(3x + 1) expands back to 27 + 1.
Common mistakes
  • A ((3x + 1)): used the same sign in the middle of the trinomial
  • B ((3x − 1)): used the wrong sign in the binomial
  • C ((3x + 1)): used 2ab in the trinomial (as for a square)

Remainder theorem

Method. Substitute x = 3 (the zero of the divisor) — no division needed.

Worked example
What is the remainder when p(x) = − 5 + 6x + 2 is divided by x − 3?
A−88
B2
C4
D8
AnswerB — 2
Step-by-step
  1. By the remainder theorem, the remainder equals p(3).
  2. Substitute x = 3: p(3) = 1 + (−5) + 6(3) + 2.
  3. Evaluate each term: 27 + (−45) + 18 + 2 = 2.
  4. The remainder is 2.
Quick checkCheck with synthetic division by 3: the last number is 2.
Common mistakes
  • A (−88): evaluated p(−3) instead of p(3)
  • C (4): evaluated p(1)
  • D (8): multiplied every coefficient by the same value instead of using powers

Factor theorem

Method. Set p(3) = 0 and solve for k.

Worked example
For what value of k is x − 3 a factor of p(x) = − − + 4x + k?
A−24
B−6
C−2
D24
AnswerD — 24
Step-by-step
  1. By the factor theorem, x − 3 is a factor exactly when p(3) = 0.
  2. Substitute x = 3: p(3) = −27 + (−9) + 12 + k = −24 + k.
  3. Set it equal to 0: −24 + k = 0.
  4. So k = 24.
Quick checkwith k = 24, p(3) = −24 + 24 = 0 ✓.
Common mistakes
  • A (−24): made a sign error solving for k
  • B (−6): substituted −3 instead of 3
  • C (−2): substituted x = 1

Polynomial division

Method. Synthetic division uses the zero of the divisor, x = 1.

Worked example
Divide ÷ (x − 1).
A−3 + 2x + 9
B−3 + 8x − 1 −
C−3 − 2x + 9
D−3 + 5x + 7 −
AnswerA — −3 + 2x + 9
Step-by-step
  1. Synthetic division with 1: bring down −3, multiply by 1 and add down the columns.
  2. Quotient −3 + 2x + 9, remainder 0.
Quick check(x − 1) = −3 + 5 + 7x − 9.
Common mistakes
  • B (−3 + 8x − 1 − ): used −1 instead of 1 in synthetic division
  • C (−3 − 2x + 9): made a sign error in the second coefficient of the quotient
  • D (−3 + 5x + 7 − ): copied the first three coefficients as the quotient

Quadratic Equations

Solve by factoring, square roots, completing the square or the quadratic formula. The discriminant tells how many real solutions there are.

Key formulas
Standard form
Quadratic formula
Discriminant
Sum and product of roots
Completing the square

Solving by factoring

Method. Get 0 on one side, factor, then set each factor to 0.

Worked example
Solve: − 21x + 102 = −8
Ax = −11 or x = −10
Bx = −10 or x = 11
Cx = 2 or x = 55
Dx = 10 or x = 11
AnswerD — x = 10 or x = 11
Step-by-step
  1. Move everything to one side: − 21x + 110 = 0.
  2. Factor: (x − 11)(x − 10) = 0, since 11 × 10 = 110 and 11 + 10 = 21.
  3. Zero-product property: x = 10 or x = 11.
Quick check + (−21)(11) + 110 = 0 ✓.
Common mistakes
  • A (x = −11 or x = −10): used the numbers from the factors without changing their signs
  • B (x = −10 or x = 11): made a sign error on one root
  • C (x = 2 or x = 55): chose a factor pair of 110 that does not add to −21

Square-root method

Method. Isolate the squared bracket, take the ± square root of both sides, then undo the shift inside the bracket.

Worked example
Solve: 3 = 147
Ax = −9 or x = 5
Bx = −5 or x = 9
Cx = 5
Dx = −51 or x = 47
AnswerA — x = −9 or x = 5
Step-by-step
  1. Divide by 3: = 49.
  2. Take square roots: x + 2 = ± = ±7.
  3. Add −2 (move the constant): x = −9 or x = 5.
Quick checksubstituting either root makes equal 49.
Common mistakes
  • B (x = −5 or x = 9): used the wrong sign for h
  • C (x = 5): forgot the negative square root
  • D (x = −51 or x = 47): forgot to take the square root

The discriminant

Method. Sign of − 4ac: positive → 2, zero → 1, negative → 0 real solutions.

Worked example
How many real solutions does 4 + 6x + 9 = 0 have?
Ano real solutions
Bexactly one real solution
Ctwo distinct real solutions
Dinfinitely many real solutions
AnswerA — no real solutions
Step-by-step
  1. Discriminant: − 4ac = − 4(4)(9) = 36 − 144 = −108.
  2. It is negative.
  3. So there are no real solutions.
Quick check − 4ac = −108 < 0, which matches the answer.
Common mistakes
  • B (exactly one real solution): thought the discriminant was 0
  • C (two distinct real solutions): made a sign error in − 4ac
  • D (infinitely many real solutions): confused a quadratic with an identity

Quadratic word problems — area

Method. Look for two numbers 2 apart whose product is 360: 18 and 20.

Worked example
A rectangle's length is 2 meters more than its width, and its area is 360 square meters. What is its width, in meters?
A18
B20
C179
D180
AnswerA — 18
Step-by-step
  1. Let w be the width: w(w + 2) = 360.
  2. So + 2w − 360 = 0.
  3. Factor: (w − 18)(w + 20) = 0.
  4. So w = 18 (a width cannot be negative).
  5. Length = 18 + 2 = 20.
Quick check18 × 20 = 360 and 20 − 18 = 2.
Common mistakes
  • B (20): gave the length
  • C (179): solved w + (w + d) = area
  • D (180): halved the area

Solving by factoring (leading coefficient ≠ 1)

Method. Use the ac-method (or test rational roots ±(factors of c)/(factors of a)).

Worked example
Solve: 5 − 23x − 10 = 0
Ax = −5 or x =
Bx = −2 or x = 5
Cx = − or x = 5
Dx = −2 or x = 1
AnswerC — x = − or x = 5
Step-by-step
  1. Factor: (x − 5)(5x + 2) = 0.
  2. Set each factor to 0: x − 5 = 0 gives x = 5.
  3. 5x + 2 = 0 gives x = −.
Quick checkthe roots add to − = and multiply to = −2: and −2 ✓.
Common mistakes
  • A (x = −5 or x = ): solved each factor with the wrong sign
  • B (x = −2 or x = 5): forgot to divide by the x-coefficient in each factor
  • D (x = −2 or x = 1): divided by the wrong coefficients

Completing the square

Method. Shortcut: + bx + c = 0 becomes = − c.

Worked example
Which equation is equivalent to − 8x + 9 = 0 after completing the square?
A = 25
B = 7
C = 55
D = 7
AnswerB — = 7
Step-by-step
  1. Move the constant: − 8x = −9.
  2. Half of −8 is −4, and = 16.
  3. Add it to both sides: − 8x + 16 = 7.
  4. Write the left side as a square: = 7.
Quick checkexpanding − 7 gives − 8x + 9.
Common mistakes
  • A ( = 25): added the constant instead of subtracting it
  • C ( = 55): used b instead of
  • D ( = 7): used the wrong sign inside the square

Quadratic formula

Method. Compute the discriminant first, simplify its square root, then divide every term by 2a.

Worked example
Solve: 2 − 9x + 1 = 0
Ax =
Bx =
Cx =
Dx =
AnswerD — x =
Step-by-step
  1. a = 2, b = −9, c = 1.
  2. Discriminant: − 4ac = 81 − 4(2)(1) = 73.
  3. x = = .
Quick checkthe roots add to − = and multiply to = .
Common mistakes
  • A (x = ): used +b instead of −b
  • B (x = ): used + 4ac in the discriminant
  • C (x = ): divided by a instead of 2a

Sum and product of the roots

Method. Vieta: sum = −, product = — no need to solve.

Worked example
What is the product of the solutions of −4 − 13x − 11 = 0?
A−
B−
C
D
AnswerD —
Step-by-step
  1. For ax² + bx + c = 0 the roots satisfy sum = − and product = .
  2. Here a = −4, b = −13, c = −11.
  3. So the product is − = .
Quick checkthese formulas hold even if the roots are not real or not rational.
Common mistakes
  • A (−): gave the sum instead of the product
  • B (−): used −
  • C (): divided a by c

Parameters — exactly one solution

Method. Exactly one real solution ⇔ − 4ac = 0.

Worked example
For what value of k does 5 + 70x + k = 0 have exactly one real solution?
A−245
B−7
C245
D4900
AnswerC — 245
Step-by-step
  1. One real solution means the discriminant is 0: − 4(5)k = 0.
  2. So 4900 = 20k and k = 245.
Quick checkwith k = 245 the discriminant is 0.
Common mistakes
  • A (−245): made a sign error
  • B (−7): used − (the vertex x-value)
  • D (4900): forgot to divide by 4a

Quadratic word problems — projectile

Method. Set the height to 0, divide out the common factor, factor, and keep the positive root.

Worked example
A ball is thrown upward from a platform. Its height, in feet, after t seconds is h = −16 + 16t + 96. After how many seconds does it hit the ground?
A
B2
C3
D6
AnswerC — 3
Step-by-step
  1. Set h = 0: −16 + 16t + 96 = 0.
  2. Divide by −16: − t − 6 = 0, which factors as (t − 3)(t + 2) = 0.
  3. So t = 3 or t = −2.
  4. Time cannot be negative.
  5. So t = 3.
Quick checkh(3) = −16(9) + 16(3) + 96 = 0.
Common mistakes
  • A (): gave the time of maximum height
  • B (2): gave the negative root without its sign as a time
  • D (6): divided the starting height by 16

Equations quadratic in form

Method. Substitute u for the repeated expression, solve the quadratic in u, then convert back to x.

Worked example
Solve: x − 8 + 12 = 0
Ax = 2 or x = 6
Bx = −6 or x = −2
Cx = −36 or x = 4
Dx = 4 or x = 36
AnswerD — x = 4 or x = 36
Step-by-step
  1. Let u = (u ≥ 0): − 8u + 12 = 0.
  2. So u = 2 or u = 6.
  3. Then x = : x = 4 or x = 36.
Quick checksubstitute each value back into the original equation.
Common mistakes
  • A (x = 2 or x = 6): solved for but did not square
  • B (x = −6 or x = −2): used the wrong signs
  • C (x = −36 or x = 4): gave a negative value, which cannot equal a square root squared

Rational Expressions and Equations

Factor, cancel common factors, and note excluded values. For equations, multiply by the LCD and check for extraneous solutions.

Key formulas
Excluded values
Multiply
Divide
Add

Excluded values

Method. Set the denominator equal to 0 and solve; ignore the numerator.

Worked example
Which values of x must be excluded from the domain of ?
Ax ≠ −3 and x ≠ −2
Bx ≠ 1
Cx ≠ 2
Dx ≠ 2 and x ≠ 3
AnswerD — x ≠ 2 and x ≠ 3
Step-by-step
  1. A rational expression is undefined where its denominator is 0.
  2. Factor the denominator: − 5x + 6 = (x − 2)(x − 3).
  3. It is 0 at x = 2 and x = 3.
  4. So x ≠ 2 and x ≠ 3.
Quick checkat x = 2 the denominator is + (−5)(2) + 6 = 0.
Common mistakes
  • A (x ≠ −3 and x ≠ −2): used the numbers in the factors instead of the zeros
  • B (x ≠ 1): used the zero of the numerator
  • C (x ≠ 2): found only one excluded value

Simplifying rational expressions

Method. Factor top and bottom completely, then cancel common FACTORS (never individual terms).

Worked example
Simplify, for values of x where the expression is defined:
A4
B4
C4
D4
AnswerC — 4
Step-by-step
  1. Factor the numerator: 4 + 32x + 60 = 4(x + 3)(x + 5).
  2. Factor the denominator: + 2x − 3 = (x + 3)(x − 1).
  3. Cancel the common factor (x + 3): 4.
Quick checkat x = 0 the original is −20 and the simplified form is −20.
Common mistakes
  • A (4): used the wrong signs after cancelling
  • B (4): made a sign error in the denominator
  • D (4): inverted the fraction

Multiplying and dividing rational expressions

Method. Factor everything, then cancel factors that appear in both a numerator and a denominator.

Worked example
Simplify: [] · [] (for values of x where it is defined)
A
B
C
D
AnswerA —
Step-by-step
  1. Factor the second fraction: (x − 5).
  2. Multiply numerators and denominators and cancel (x − 5) and (x − 1): .
Quick checkCheck at x = 0: the original gives − and the answer gives −.
Common mistakes
  • B (): multiplied by the reciprocal of the second fraction (divided instead)
  • C (): inverted the result
  • D (): cancelled the wrong factor

Adding and subtracting rational expressions

Method. Cross-multiply: ± = [a(x+q) ± b(x+p)] / [(x+p)(x+q)].

Worked example
Write as a single fraction: +
A
B
C
D
AnswerD —
Step-by-step
  1. The common denominator is (x + 5)(x + 2) = + 7x + 10.
  2. Rewrite: −6(x + 2) + (−4)(x + 5) over + 7x + 10.
  3. Expand the numerator: −6x − 12 + (−4x − 20) = −10x − 32.
  4. Result: .
Quick checkCheck at x = 0: − + (−2) = − and −.
Common mistakes
  • A (): added the numerators without using a common denominator
  • B (): added the numerators and added the denominators
  • C (): used the wrong sign for the second numerator

Solving rational equations

Method. Clear the fractions by multiplying by the LCD (or cross-multiply), solve, then check the excluded values.

Worked example
Solve: − 2 = −
Ax = −8
Bx = −3
Cx = 8
Dx = −16
AnswerC — x = 8
Step-by-step
  1. Multiply every term by x (x ≠ 0): 11 − 2x = −5.
  2. So −2x = −16 and x = 8.
  3. Since x ≠ 0, the solution is valid.
Quick check − 2 = − = − ✓, and x = 8 makes no denominator 0.
Common mistakes
  • A (x = −8): wrote +2x instead of −2x after multiplying by x: 11 + 2x = −5
  • B (x = −3): made two sign slips, writing 11 + 2x = 5
  • D (x = −16): stopped at −2x = −16 and gave −16

Extraneous solutions

Method. After solving, always test each answer in the original denominators.

Worked example
Solve: =
Ax = −4 or x = 3
Bx = 3
Cx = −4
Dno solution
AnswerB — x = 3
Step-by-step
  1. The denominators are equal.
  2. So set the numerators equal (x ≠ −4): + x = 12.
  3. Move everything to one side: + x − 12 = 0.
  4. Factor: (x + 4)(x − 3) = 0.
  5. So x = −4 or x = 3.
  6. Reject x = −4: it makes the denominator 0 (extraneous).
  7. The only solution is x = 3.
Quick checkat x = 3 the denominator is 7 ≠ 0 and both sides equal .
Common mistakes
  • A (x = −4 or x = 3): kept the extraneous solution
  • C (x = −4): kept only the extraneous solution
  • D (no solution): rejected the valid solution as well

Rational equations — work problems

Method. Together time = (product)/(sum) = = .

Worked example
Working alone, printer A takes 4 minutes to print a batch of flyers and printer B takes 3 minutes. Working together at these rates, how many minutes will it take?
A1
B
C
D7
AnswerB —
Step-by-step
  1. Rates add: + = of the job per minute.
  2. Time = 1 ÷ = minutes.
Quick checkin minutes, printer A does of the job and printer B does ; together 1 job.
Common mistakes
  • A (1): subtracted the times
  • C (): averaged the two times
  • D (7): added the two times

Radical Equations

Isolate the radical, raise both sides to the matching power, solve, and always check: squaring can create extraneous solutions.

Key formulas
Square both sides
Cube both sides
Rational exponent

Solving square-root equations

Method. Square both sides to remove the radical, then solve the linear equation and check.

Worked example
Solve: = 7
Ax = 38
Bx = −4
Cx = 60
Dx = 3
AnswerA — x = 38
Step-by-step
  1. Square both sides: x + 11 = 49.
  2. Subtract 11: x = 38.
Quick checksubstitute x = 38: 38 + 11 = 49, and = 7 ✓.
Common mistakes
  • B (x = −4): did not square the right side
  • C (x = 60): added the constant instead of subtracting it
  • D (x = 3): doubled instead of squaring

Radical equations — isolate first

Method. Isolate the radical before squaring; a square root can never equal a negative number.

Worked example
Solve: + 1 = 6
Ax = 26
Bx = 16
Cx = −4
Dno solution
AnswerB — x = 16
Step-by-step
  1. Isolate the radical: = 6 − 1 = 5.
  2. Square both sides: x + 9 = 25.
  3. So x = 16.
  4. Check: + 1 = 5 + 1 = 6 ✓.
Quick checksubstitute the answer into the original equation (not the squared one).
Common mistakes
  • A (x = 26): squared each term separately instead of isolating the radical first
  • C (x = −4): did not square after isolating the radical
  • D (no solution): thought the equation had no solution

Cube-root equations

Method. Cube both sides; cube roots of negative numbers are allowed, so there is no extraneous check for sign.

Worked example
Solve: = −5
Ax = −22
Bx = 8
Cx = 2
Dx = 0
AnswerA — x = −22
Step-by-step
  1. Cube both sides: 5x − 15 = = −125.
  2. Add 15: 5x = −110.
  3. Divide by 5: x = −22.
Quick checksubstitute x = −22: 5x − 15 becomes −125, and = −5 ✓.
Common mistakes
  • B (x = 8): squared instead of cubing
  • C (x = 2): did not cube the right side
  • D (x = 0): multiplied by 3 instead of cubing

Equations with two radicals

Method. Square both sides, solve, then make sure the expressions under the roots are not negative.

Worked example
Solve: =
Ax = 4
Bx = −
Cno solution
Dx = 14
AnswerC — no solution
Step-by-step
  1. Square both sides: 2x − 9 = 3x + 5.
  2. Then −x = 14.
  3. So x = −14.
  4. Check: the radicands equal −37 < 0.
  5. So the square roots are not real — no solution.
Quick checkat x = −14, 2x − 9 = −37 and 3x + 5 = −37.
Common mistakes
  • A (x = 4): added the constants instead of subtracting
  • B (x = −): added the x-coefficients instead of subtracting
  • D (x = 14): made a sign error moving the constants

Radical models

Method. Isolate the square root first, then square.

Worked example
The speed v, in feet per second, of an object dropped from a height of h feet is modeled by v = 8. For what value of h is the speed 56?
A49
B392
C448
D2304
AnswerA — 49
Step-by-step
  1. Substitute: 56 = 8.
  2. Divide by 8: = 7.
  3. Square: h = 49 feet.
Quick check8 = 8 × 7 = 56 ✓.
Common mistakes
  • B (392): squared before dividing
  • C (448): multiplied 56 by 8 instead of dividing, and did not square
  • D (2304): subtracted 8 instead of dividing

Radical equations — extraneous solutions

Method. Squaring can create extra roots — always substitute back into the ORIGINAL equation.

Worked example
Solve: = x − 5
Ax = 2 or x = 9
Bx = 2
Cx = 9
Dno solution
AnswerC — x = 9
Step-by-step
  1. Square both sides: x + 7 = = − 10x + 25.
  2. Rearrange: − 11x + 18 = 0.
  3. Factor: (x − 2)(x − 9) = 0.
  4. So x = 2 or x = 9.
  5. Check x = 2: the right side x − 5 = −3 is negative, but a square root cannot be negative.
  6. So it is extraneous.
  7. Check x = 9: = 4 ✓.
Quick check = 4 and (9) − 5 = 4.
Common mistakes
  • A (x = 2 or x = 9): kept the extraneous solution
  • B (x = 2): kept only the extraneous solution
  • D (no solution): rejected both solutions

Rational-exponent equations

Method. Undo by raising to the reciprocal power ; if m is even, include ±.

Worked example
Solve for real x: = 256
Ax = 64
Bx = −192 or x = 192
Cx = −4 or x = 4
Dx = −64 or x = 64
AnswerD — x = −64 or x = 64
Step-by-step
  1. = 256 means = 256.
  2. Because 4 is even, take ± the 4th root: = ±4.
  3. Raise both sides to the power 3: x = = ±64.
  4. Both values work because the even power removes the sign.
Quick check = = = 256 ✓.
Common mistakes
  • A (x = 64): forgot the negative solution from the even power
  • B (x = −192 or x = 192): multiplied by instead of raising to the power
  • C (x = −4 or x = 4): took the root but did not raise to the power

Absolute Value

Absolute value is distance from 0. Split |expression| = k into two equations; check that k is not negative.

Key formulas
Equation
Less than
Greater than
Vertex of y = a|x − h| + k

Absolute-value equations

Method. |stuff| = c > 0 → stuff = c or stuff = −c; c = 0 → one solution; c < 0 → none.

Worked example
Solve: |5x + 5| = 7
Ax =
Bx = − or x =
Cx = − or x =
Dx = − or x =
AnswerB — x = − or x =
Step-by-step
  1. Split into two cases.
  2. Case 1: 5x + 5 = 7.
  3. So x = .
  4. Case 2: 5x + 5 = −7.
  5. So x = −.
  6. Solutions: x = − or x = .
Quick checksubstitute each answer; the inside of the bars equals ±7.
Common mistakes
  • A (x = ): forgot the negative case
  • C (x = − or x = ): used the wrong sign for b in both cases
  • D (x = − or x = ): negated the first solution instead of solving the second case

Absolute-value equations — isolate first

Method. Isolate the absolute value first (undo + and ×), then split into ± cases.

Worked example
Solve: 2|x − 8| + 12 = 0
Ano solution
Bx = −4 or x = 20
Cx = −14 or x = −2
Dx = 14
AnswerA — no solution
Step-by-step
  1. Subtract 12: 2|x − 8| = −12.
  2. Divide by 2: |x − 8| = −6.
  3. An absolute value cannot be negative.
  4. So there is no solution.
Quick check2|…| + 12 ≥ 12 > 0 for every x.
Common mistakes
  • B (x = −4 or x = 20): subtracted 12 but did not divide by 2
  • C (x = −14 or x = −2): used the wrong sign for the shift inside the bars
  • D (x = 14): forgot the second case

Absolute-value inequalities

Method. Less than → between (and); greater than → outside (or). Center ± radius gives the endpoints.

Worked example
Solve: |x − 2| < 5
Ax < −3 or x > 7
B−3 < x < 7
C−7 < x < 3
D−3 ≤ x ≤ 7
AnswerB — −3 < x < 7
Step-by-step
  1. |x − 2| is the distance from x to 2.
  2. Distance < 5 means x is within 5 of 2: −3 < x < 7.
Quick checkx = 2 gives distance 0, which satisfies the inequality.
Common mistakes
  • A (x < −3 or x > 7): used “or” (outside) instead of between
  • C (−7 < x < 3): used the wrong sign for the center
  • D (−3 ≤ x ≤ 7): changed whether the endpoints are included

Graphs of absolute-value functions — vertex

Method. Vertex = (value that makes the inside 0, the constant added outside).

Worked example
What is the vertex of the graph of y = |x + 7| − 2?
A(7, −2)
B(−2, −7)
C(−7, 2)
D(−7, −2)
AnswerD — (−7, −2)
Step-by-step
  1. y = a|x − h| + k has vertex (h, k).
  2. Here the inside is zero at x = −7, and then y = −2.
  3. Vertex: (−7, −2).
Quick checkat x = −7, the absolute value is 0, so y = 0 − 2 = −2.
Common mistakes
  • A ((7, −2)): used the sign inside the bars as the x-coordinate
  • B ((−2, −7)): swapped the coordinates
  • C ((−7, 2)): used the wrong sign for the vertical shift

Graphs of absolute-value functions — equation

Method. Read the vertex for h and k; the slope of the right-hand side gives a (negative if the V opens down).

Worked example
Which equation is shown in the graph? (The vertex is marked.)
Figure for the worked example
Ay = −|x + 4| − 3
By = −|x − 4| + 3
Cy = |x − 4| − 3
Dy = −|x − 4| − 3
AnswerD — y = −|x − 4| − 3
Step-by-step
  1. The vertex is at (4, −3).
  2. So the equation has the form y = a|x − 4| − 3.
  3. The graph opens down, and moving 1 unit right from the vertex changes y by −.
  4. So a = −.
  5. Equation: y = −|x − 4| − 3.
Quick checkat x = 6 the equation gives y = −4, which matches the graph.
Common mistakes
  • A (y = −|x + 4| − 3): used the wrong sign for the horizontal shift
  • B (y = −|x − 4| + 3): used the wrong sign for the vertical shift
  • C (y = |x − 4| − 3): missed whether the V opens up or down

Absolute value in context — tolerance

Method. Tolerance problems: |measurement − target| ≤ allowed error.

Worked example
A part must measure 80 grams, with an allowed error of at most grams. What is the greatest acceptable measurement?
A5
B
C80
D
AnswerD —
Step-by-step
  1. |m − 80| ≤ gives ≤ m ≤ .
  2. The greatest acceptable value is grams.
Quick check − 80 = , the full allowed error.
Common mistakes
  • A (5): gave the width of the acceptable interval
  • B (): gave the least acceptable measurement
  • C (80): gave the target value

Equations with two absolute values

Method. |x − a| = |x − b| ⇒ x = .

Worked example
Solve: |x + 11| = |x + 6|
Ax = −
Bx = −
Cx = −11 or x = −6
Dx = −17
AnswerB — x = −
Step-by-step
  1. Equal distances from −11 and −6 means x is the midpoint.
  2. Algebra: either x − (−11) = x − (−6) (impossible since −11 ≠ −6) or x − (−11) = −(x − (−6)).
  3. So 2x = −17 and x = −.
Quick check|− − (−11)| = and |− − (−6)| = .
Common mistakes
  • A (x = −): subtracted instead of adding
  • C (x = −11 or x = −6): gave the two points instead of the midpoint
  • D (x = −17): forgot to divide by 2

Modulus functions |f(x)|

Method. Reflect the negative part of y = f(x) above the x-axis and count intersections with y = c.

Worked example
How many real solutions does | − 7x + 10| = 7 have?
A0
B1
C2
D3
AnswerC — 2
Step-by-step
  1. |f(x)| = 7 means f(x) = 7 or f(x) = −7.
  2. f(x) = − 7x + 10 has minimum value − .
  3. f(x) = 7 always has 2 solutions.
  4. f(x) = −7 has no solutions because −7 < −.
  5. Total: 2.
Quick checkthe reflected graph reaches up to between the roots 2 and 5; y = 7 is above that height.
Common mistakes
  • A (0): thought the graph never reaches that height
  • B (1): counted only one of the two solutions of f(x) = 7
  • D (3): misjudged the height of the reflected arch as 7, so counted its top point x = as a third solution (the arch only reaches )

Inequalities

Solve like equations, but reverse the inequality sign when multiplying or dividing by a negative number. Compound inequalities give intervals.

Key formulas
Flip rule
Compound
Interval notation

Solving inequalities — negative coefficient

Method. Dividing (or multiplying) both sides by a negative number reverses the inequality.

Worked example
Solve: −6x − 9 ≤ −3
Ax ≤ −1
Bx ≥ −1
Cx ≥ 1
Dx ≤ 1
AnswerB — x ≥ −1
Step-by-step
  1. Add 9: −6x ≤ 6.
  2. Divide by −6 and reverse the sign (dividing by a negative): x ≥ −1.
Quick checkx = 0 should work: −6(0) − 9 = −9, which is ≤ −3.
Common mistakes
  • A (x ≤ −1): forgot to reverse the sign when dividing by a negative number
  • C (x ≥ 1): dropped the negative sign of the coefficient but still reversed the sign
  • D (x ≤ 1): divided by the positive number instead of the negative one

Inequalities with variables on both sides

Method. Collect x on one side; watch for dividing by a negative.

Worked example
Solve: 3x + 9 ≥ −x + 53
Ax ≤ 11
Bx ≥ 11
Cx ≥ 22
Dx ≥
AnswerB — x ≥ 11
Step-by-step
  1. Move the x-terms to the left: 4x ≥ 44.
  2. Divide by 4: x ≥ 11.
Quick checkat x = 11 both sides equal 42, so 11 is the boundary; test x = 12 to confirm the direction.
Common mistakes
  • A (x ≤ 11): reversed the sign without dividing by a negative
  • C (x ≥ 22): added the x-terms instead of subtracting
  • D (x ≥ ): used the wrong sign when moving the constant

Compound inequalities — and

Method. Treat the middle as the target and apply each step to all three parts.

Worked example
Solve: −3 < −2x + 1 < 11
A− < x <
B−5 < x < 2
C−4 < x < 10
D−5 ≤ x ≤ 2
AnswerB — −5 < x < 2
Step-by-step
  1. Do the same thing to all three parts.
  2. Subtract 1: −4 < −2x < 10.
  3. Divide by −2 and reverse both signs: −5 < x < 2.
Quick checkthe endpoints come from −2x + 1 = −3 and −2x + 1 = 11: x = 2 and x = −5.
Common mistakes
  • A (− < x < ): divided all three parts but did not subtract the constant
  • C (−4 < x < 10): subtracted the constant but did not divide
  • D (−5 ≤ x ≤ 2): switched which endpoints are included

Compound inequalities — or

Method. “Or” keeps everything from both parts; “and” keeps only the overlap.

Worked example
Solve: 4x + 2 < −26 or 5x − 6 > −26
A−7 < x < −4
Bx < −7 or x > −4
Cx > −7 or x < −4
Dx ≤ −7 or x ≥ −4
AnswerB — x < −7 or x > −4
Step-by-step
  1. Solve each part.
  2. 4x + 2 < −26 gives x < −7.
  3. 5x − 6 > −26 gives x > −4.
  4. With “or”, the solution is either part: x < −7 or x > −4.
Quick checkx = −8 satisfies the first part and x = −3 satisfies the second; x = −6 satisfies neither.
Common mistakes
  • A (−7 < x < −4): took the values between the endpoints instead of outside them
  • C (x > −7 or x < −4): reversed both inequality signs
  • D (x ≤ −7 or x ≥ −4): included the endpoints

Interval notation

Method. Square bracket = endpoint included; parenthesis = not included; ∞ always gets a parenthesis.

Worked example
Which interval is the solution set of −2x − 2 ≤ −6?
A(2, ∞)
B(−∞, 2]
C[2, ∞)
D[−2, ∞)
AnswerC — [2, ∞)
Step-by-step
  1. −2x ≤ −4.
  2. So x ≥ 2 (sign reversed: divided by a negative).
  3. In interval notation: [2, ∞).
Quick check2 is in the set, matching the bracket used.
Common mistakes
  • A ((2, ∞)): used the wrong kind of bracket at the endpoint
  • B ((−∞, 2]): reversed the direction (did not flip the sign for the negative coefficient)
  • D ([−2, ∞)): made a sign error in the endpoint

Absolute-value inequalities

Method. |stuff| < k → between −k and k (“and”); |stuff| > k → outside (“or”).

Worked example
Solve: |3x + 15| ≤ 9
A−8 ≤ x ≤ −2
Bx ≤ −8 or x ≥ −2
C2 ≤ x ≤ 8
Dx ≤ −2
AnswerA — −8 ≤ x ≤ −2
Step-by-step
  1. Divide by 3: |x + 5| ≤ 3.
  2. Distance from −5 is at most 3: −5 − 3 ≤ x ≤ −5 + 3.
  3. So −8 ≤ x ≤ −2.
Quick checkx = −5 gives |0| = 0, which satisfies the inequality, as expected.
Common mistakes
  • B (x ≤ −8 or x ≥ −2): used “or” (outside) instead of “and” (between)
  • C (2 ≤ x ≤ 8): used the wrong sign for the center
  • D (x ≤ −2): solved only the positive case

Greatest or least integer solution

Method. Solve, then step to the nearest integer on the allowed side (exclude the boundary for < or >).

Worked example
What is the least integer x that satisfies 8x − 8 ≥ 31?
A3
B4
C5
D6
AnswerC — 5
Step-by-step
  1. 8x ≥ 39.
  2. So x ≥ ≈ 4.88.
  3. The least integer that works is 5.
Quick check8(5) − 8 = 32 ≥ 31 ✓, but x = 4 gives 24, which fails.
Common mistakes
  • A (3): subtracted 8 from 31 instead of adding it: 8x ≥ 23, x ≥ , so 3
  • B (4): rounded the boundary down instead of up
  • D (6): went one integer past the least value

Inequality word problems

Method. Subtract the fixed fee, divide by the price, and round DOWN.

Worked example
An art studio charges a one-time fee of $26 and $3.50 per art class. Sam can spend at most $134. What is the greatest number of classes he can pay for?
A30
B31
C38
D45
AnswerA — 30
Step-by-step
  1. Let n be the number of classes: 26 + 3.5n ≤ 134.
  2. Then 3.5n ≤ 108.
  3. So n ≤ ≈ 30.86.
  4. The greatest whole number is 30.
Quick check30 classes cost $131.00 ≤ $134.00, but 31 cost $134.50.
Common mistakes
  • B (31): rounded up instead of down
  • C (38): ignored the one-time fee
  • D (45): added the fee to the budget

Two-variable inequalities — solutions

Method. Points that satisfy it lie below the line y = 3x + 3 (or on it).

Worked example
Which point is a solution of y ≤ 3x + 3?
A(−4, −1)
B(−5, −2)
C(−5, 2)
D(2, 6)
AnswerD — (2, 6)
Step-by-step
  1. Substitute the point.
  2. For (2, 6), 3(2) + 3 = 9, and y = 6 ≤ 9 ✓.
Quick checkeach other choice gives a false statement when substituted.
Common mistakes
  • A ((−4, −1)): chose a point above the line
  • B ((−5, −2)): chose a point above the line
  • C ((−5, 2)): chose a point above the line

Two-variable inequalities — graphs

Method. Line: read the y-intercept and slope. Dashed → < or >; solid → ≤ or ≥. Above → y >; below → y <.

Worked example
Which inequality is shown by the graph? (The shaded region is the solution set.)
Figure for the worked example
Ay < −3x + 1
By ≤ −3x + 1
Cy ≥ −3x + 1
Dy ≤ 3x + 1
AnswerB — y ≤ −3x + 1
Step-by-step
  1. The boundary passes through (0, 1) with slope −3.
  2. So it is y = −3x + 1.
  3. It is solid (included) and the shading is below the line: y ≤ −3x + 1.
Quick checkthe test point (0, −1) is in the shaded region and satisfies y ≤ −3x + 1.
Common mistakes
  • A (y < −3x + 1): misread the dashed/solid boundary line
  • C (y ≥ −3x + 1): chose the wrong side of the line
  • D (y ≤ 3x + 1): used the wrong sign for the slope

Systems of linear inequalities

Method. A solution of a system must satisfy every inequality; test each choice in both.

Worked example
Which point is a solution of the system y < −2x − 4 and y ≥ −x − 2?
A(−4, 0)
B(5, −5)
C(−5, 3)
D(0, −3)
AnswerC — (−5, 3)
Step-by-step
  1. Test (−5, 3) in both.
  2. 3 < 6 ✓ and 3 ≥ 3 ✓.
Quick checkeach other choice fails at least one of the two inequalities.
Common mistakes
  • A ((−4, 0)): checked only the first inequality
  • B ((5, −5)): checked only the second inequality
  • D ((0, −3)): chose a point that satisfies neither inequality

Systems of Linear Equations

Solve by substitution or elimination. Parallel lines give no solution; identical lines give infinitely many.

Key formulas
Substitution
Elimination
Number of solutions

Systems — substitution

Method. When one equation already gives y, substitute it straight into the other.

Worked example
What is the solution (x, y) of the system y = −4x − 3 and −4x − 2y = −22?
A(25, −7)
B(−7, 31)
C(−4, 13)
D(−7, 25)
AnswerD — (−7, 25)
Step-by-step
  1. Substitute y = −4x − 3 into the second equation: −4x + (−2)(−4x − 3) = −22.
  2. So 4x + 6 = −22.
  3. So x = −7.
  4. Then y = −4(−7) − 3 = 25.
Quick check−4(−7) + (−2)(25) = −22 ✓ and −4(−7) − 3 = 25 ✓.
Common mistakes
  • A ((25, −7)): swapped x and y
  • B ((−7, 31)): used the wrong sign for b when finding y
  • C ((−4, 13)): used the wrong sign for the constant after substituting

Systems — elimination

Method. Scale the equations so one variable has opposite (or equal) coefficients, then add (or subtract).

Worked example
What is the solution (x, y) of the system −6x + y = −7 and 3x + 5y = −2?
A(1, −1)
B(−1, 1)
C(1, 1)
D
AnswerA — (1, −1)
Step-by-step
  1. Multiply the first equation by 5 and the second by 1.
  2. Then subtract to eliminate y: (−30 − 3)x = −35 − (−2).
  3. So −33x = −33 and x = 1.
  4. Substitute into the first equation: −6(1) + y = −7.
  5. So y = −1.
Quick checkCheck both equations: −6(1) + 1(−1) = −7 ✓ and 3(1) + 5(−1) = −2 ✓.
Common mistakes
  • B ((−1, 1)): swapped x and y
  • C ((1, 1)): made a sign error isolating y: y = 7 − 6 = 1
  • D (): subtracted the left sides but added the right sides (−35 + (−2)), getting x =

Systems — checking a solution

Method. Test each choice in BOTH equations; one failure rules it out.

Worked example
Which ordered pair is a solution of the system −6x − 4y = 52 and 6x + 2y = −50?
A(−6, −4)
B(−9, 2)
C(−8, −1)
D(−1, −8)
AnswerC — (−8, −1)
Step-by-step
  1. A solution must make both equations true.
  2. (−8, −1): −6(−8) + (−4)(−1) = 52 ✓ and 6(−8) + 2(−1) = −50 ✓.
Quick checkevery other choice fails at least one of the two equations.
Common mistakes
  • A ((−6, −4)): checked only the first equation
  • B ((−9, 2)): checked only the second equation
  • D ((−1, −8)): swapped the coordinates of the solution

Systems — number of solutions

Method. Compare slopes : different → one solution; same slope, different intercept → none; identical lines → infinitely many.

Worked example
How many solutions does the system x + 4y = −11 and 2x + 8y = −22 have?
Ainfinitely many solutions
Bno solution
Cexactly one solution
Dexactly two solutions
AnswerA — infinitely many solutions
Step-by-step
  1. Compare the equations: the second is 2 times the first.
  2. So they are the same line — infinitely many solutions.
Quick checkslope of the first line − = −; slope of the second − = −.
Common mistakes
  • B (no solution): thought equal slopes always mean no solution
  • C (exactly one solution): thought different-looking equations must cross once
  • D (exactly two solutions): thought two lines can meet at two points

Systems — parameter for no solution

Method. Same slope, different intercept ⇒ no solution: match the coefficient ratio.

Worked example
In the system −4x + 6y = −8 and kx − 12y = 14, k is a constant. For what value of k does the system have no solution?
A−8
B−4
C2
D8
AnswerD — 8
Step-by-step
  1. No solution means parallel lines: the x- and y-coefficients must be in the same ratio while the constants are not.
  2. The y-coefficients give the ratio − = −2.
  3. So k = −2 × (−4) = 8.
  4. The constants 14 and −2 × (−8) = 16 differ.
  5. So the lines are parallel.
Quick checkwith k = 8, the second left side is −2 times the first (−2 × (−4) = 8, −2 × 6 = −12), but 14 ≠ −2 × (−8) = 16, so the lines are parallel.
Common mistakes
  • A (−8): made a sign error in the matching coefficient
  • B (−4): matched the coefficient without scaling
  • C (2): scaled by the wrong factor

Systems — parameter for infinitely many solutions

Method. Infinitely many solutions ⇔ one equation is a constant multiple of the other.

Worked example
The system −5x + 4y = −6 and px − 8y = 12 has infinitely many solutions, where p is a constant. What is the value of p?
A−10
B−7
C−5
D10
AnswerD — 10
Step-by-step
  1. For infinitely many solutions the second equation is a multiple of the first.
  2. The y-coefficients give the factor − = −2 (and the constants agree: = −2).
  3. So p = −2 × (−5) = 10.
Quick checkmultiplying −5x + 4y = −6 through by −2 gives 10x − 8y = 12, the same line.
Common mistakes
  • A (−10): made a sign error when scaling
  • B (−7): added the scale factor instead of multiplying
  • C (−5): did not scale the coefficient

Systems — word problems (two totals)

Method. If all 107 were adult tickets they would bring $1,284.00; each child ticket adds $6.00, so children = ($1,632.00 − $1,284.00) ÷ $6.00 = 58.

Worked example
A theater sold 107 tickets for a total of $1,632.00. Adult tickets cost $12.00 and child tickets cost $18.00. How many child tickets were sold?
A29
B49
C58
D107
AnswerC — 58
Step-by-step
  1. Let a = adult tickets and c = child tickets: a + c = 107 and 12a + 18c = 1632.
  2. Substitute c = 107 − a: 12a + 18(107 − a) = 1632.
  3. So −6a = −294 and a = 49.
  4. c = 58.
Quick check49 + 58 = 107 and 49 × $12.00 + 58 × $18.00 = $1,632.00.
Common mistakes
  • A (29): divided by the cheaper price instead of the price difference
  • B (49): found the number of the other kind of ticket
  • D (107): gave the total number of tickets

Systems — finding an expression directly

Method. Combine the equations so the coefficients of x and y become equal; then divide.

Worked example
If 2x + 5y = 38 and 2x − y = 14, what is the value of x + y?
A5
B9
C13
D52
AnswerC — 13
Step-by-step
  1. Add: 4x + 4y = 52, which is 4(x + y) = 52.
  2. So x + y = 13.
  3. (Here x = 9, y = 4.).
Quick checkx = 9, y = 4 satisfies both equations and gives x + y = 13.
Common mistakes
  • A (5): found x − y instead
  • B (9): gave x only
  • D (52): added the equations but did not divide

3×3 systems

Method. Use the equation with a coefficient of ±1 (here −y in the second) to eliminate y from the other two, solve the 2×2 system, then substitute back.

Worked example
Solve the system −3x − 4y − 3z = 35, 3x − y − 3z = 8, 2x + 3y − 4z = −7. What is the value of z?
A−5
B−3
C−2
D3
AnswerB — −3
Step-by-step
  1. Eliminate one variable from two pairs of equations to get a 2×2 system, solve it, and substitute back.
  2. The solution is x = −2, y = −5, z = −3.
  3. So z = −3.
Quick checkCheck each equation: −3x − 4y − 3z → 35 ✓; 3x − y − 3z → 8 ✓; 2x + 3y − 4z → −7 ✓.
Common mistakes
  • A (−5): gave y instead of z
  • C (−2): gave x instead of z
  • D (3): made a sign error in z

Systems — when is there no unique solution?

Method. No unique solution ⇔ the x- and y-coefficients are proportional: cross-multiply (−6)(−6) = 2k, so k = 18.

Worked example
For what value of k does the system −6x + 2y = 4 and kx − 6y = −3 fail to have a unique solution?
A−18
B0
C2
D18
AnswerD — 18
Step-by-step
  1. There is no unique solution when the two lines are parallel or the same, that is, when the coefficients are in the same ratio: = .
  2. So = −3 and k = 18.
Quick checkwith k = 18 the left side of the second equation is −3 times the first's: −3 × (−6) = 18 and −3 × 2 = −6.
Common mistakes
  • A (−18): made a sign error when cross-multiplying
  • B (0): thought k = 0 makes the system fail
  • C (2): cross-multiplied the wrong pair, (−6)k = 2(−6)

Word Problems

Name the unknown, translate the words into an equation, solve, and answer the question that was asked, with units.

Key formulas
Distance
Work
Mixture
Consecutive integers
Simple interest

Age problems

Method. Add the same number of years to BOTH ages before setting up the multiple.

Worked example
Omar is 3 times as old as Zoe. In 17 years, Omar will be 2 times as old as Zoe. How old is Zoe now?
A17
B34
C51
D68
AnswerA — 17
Step-by-step
  1. Let Zoe's age now be b.
  2. So Omar is 3b.
  3. In 17 years: 3b + 17 = 2(b + 17).
  4. Expand: 3b + 17 = 2b + 34.
  5. Subtract 2b and 17: b = 17.
Quick checknow 51 and 17; in 17 years 68 and 34, and 68 = 2 × 34 ✓.
Common mistakes
  • B (34): gave Zoe's age in 17 years
  • C (51): gave Omar's age instead of Zoe's
  • D (68): gave Omar's age in 17 years

Consecutive integers

Method. The middle (average) is 70 ÷ 5; step out from the middle.

Worked example
The sum of 5 consecutive integers is 70. What is the largest of these integers?
A12
B14
C16
D17
AnswerC — 16
Step-by-step
  1. Let the smallest be n.
  2. The 5 consecutive integers are n, n + 1, n + 2, n + 3, n + 4.
  3. Their sum: 5n + 10 = 70.
  4. Subtract 10: 5n = 60.
  5. Divide: n = 12.
  6. The largest is n + 4 = 16.
Quick check12 + 13 + 14 + 15 + 16 = 70, the given sum ✓.
Common mistakes
  • A (12): gave the smallest number
  • B (14): gave the average (middle value)
  • D (17): added one step too many

Distance, rate and time

Method. Distance = rate × time; opposite directions or toward each other → add speeds, same direction → subtract.

Worked example
Two cars leave the same town at the same time and drive in opposite directions, one at 30 miles per hour and the other at 70 miles per hour. After how many hours will they be 150 miles apart?
A1.5
B3
C3.75
D5
AnswerA — 1.5
Step-by-step
  1. Moving apart, the distance grows at 30 + 70 = 100 miles per hour.
  2. Time = distance ÷ rate: 150 ÷ 100 = 1.5 hours.
Quick check30 × 1.5 + 70 × 1.5 = 45 + 105 = 150 ✓.
Common mistakes
  • B (3): divided by the average speed instead of the sum of the speeds
  • C (3.75): subtracted the speeds instead of adding
  • D (5): used only the first car's speed

Work problems

Method. Together time = (product)/(sum) of the two times.

Worked example
Ava can paint a fence in 6 hours. Ben can paint the same fence in 12 hours. Working together at these rates, how many hours will it take them to paint the fence?
A4
B6
C9
D18
AnswerA — 4
Step-by-step
  1. Ava does of the job per hour and Ben does .
  2. Together: + = of the job per hour.
  3. Time = 1 ÷ = 4 hours.
Quick checkin 4 hours Ava paints and Ben paints of the fence; + = 1 ✓.
Common mistakes
  • B (6): subtracted the two times
  • C (9): averaged the two times
  • D (18): added the two times

Averages

Method. New score = new average + (number of old tests) × (rise in average) = 78 + 4 × 4.

Worked example
Mia's average score on 4 tests is 74. What score does Mia need on the next test to raise the average to 78?
A20
B78
C82
D94
AnswerD — 94
Step-by-step
  1. Current total: 4 × 74 = 296.
  2. Needed total for 5 tests: 5 × 78 = 390.
  3. Next score: 390 − 296 = 94.
Quick check(296 + 94) ÷ 5 = 390 ÷ 5 = 78 ✓.
Common mistakes
  • A (20): multiplied the gap by 5
  • B (78): gave the target average
  • C (82): averaged the old average and the new score only

Simple interest

Method. Simple interest I = P × r × t with r as a decimal; total = P + I.

Worked example
Sofia deposits $2,000 in an account that pays 2.5% simple interest per year. After how many years will the account hold $2,250?
A5
B6
C45
D60
AnswerA — 5
Step-by-step
  1. Interest needed: $2,250 − $2,000 = $250.
  2. Interest per year: 2.5% of $2,000 = $50.
  3. Years: $250 ÷ $50 = 5.
Quick check$2,000 × 0.025 × 5 = $250 ✓.
Common mistakes
  • B (6): counted the first year twice
  • C (45): divided the total amount instead of the interest by the yearly interest
  • D (60): gave the time in months

Writing inequalities from words

Method. “At most / no more than” → ≤; “at least” → ≥; “more than” → >; “less than” → <.

Worked example
Sofia pays a $15 entry fee at a fair and then $4 for each ride. Sofia wants to spend no more than $120 in total. Which inequality gives the possible numbers of rides n?
A15 + 4n ≥ 120
B4n ≤ 120
C15 + 4n ≤ 120
D15 + 4n < 120
AnswerC — 15 + 4n ≤ 120
Step-by-step
  1. Total spent = fee + price × rides = 15 + 4n.
  2. “No more than” 120 means ≤ 120.
  3. So 15 + 4n ≤ 120.
Quick checkthe boundary 15 + 4n = 120 gives n = ; the sign ≤ keeps the totals that are no more than 120 ✓.
Common mistakes
  • A (15 + 4n ≥ 120): reversed the inequality sign
  • B (4n ≤ 120): left out the fixed fee
  • D (15 + 4n < 120): changed whether the boundary is included

Systems from word problems

Method. If all 83 were child tickets: 498; each adult ticket adds 3, so adults = (585 − 498) ÷ 3.

Worked example
A school play sold 83 tickets. Adult tickets cost $9 and child tickets cost $6. Ticket sales totaled $585. How many adult tickets were sold?
A18
B29
C39
D54
AnswerB — 29
Step-by-step
  1. Let x = adult tickets and y = child tickets.
  2. Then x + y = 83 and 9x + 6y = 585.
  3. Substitute y = 83 − x: 9x + 6(83 − x) = 585.
  4. So 3x + 498 = 585, 3x = 87, and x = 29.
  5. Then y = 83 − 29 = 54.
  6. The number of adult tickets is 29.
Quick check29 + 54 = 83 and 9(29) + 6(54) = 261 + 324 = 585 ✓.
Common mistakes
  • A (18): divided the shortfall 83 × 9 − 585 = 162 by the adult price 9 instead of the price difference 3
  • C (39): divided the revenue by the sum of the prices
  • D (54): gave the number of child tickets

Inequalities in context

Method. Subtract the fixed cost, divide by the unit price, then round DOWN.

Worked example
Leo has $45 to spend at a craft fair. Entry costs $6, and each bead kit costs $2.50. What is the greatest number of bead kits Leo can buy?
A15
B16
C18
D20
AnswerA — 15
Step-by-step
  1. Write the inequality: 6 + 2.5n ≤ 45.
  2. Subtract 6: 2.5n ≤ 39.
  3. Divide by 2.5: n ≤ = 15.6.
  4. n must be a whole number.
  5. So the greatest is 15.
Quick check15 kits cost $6 + $37.50 = $43.50 ≤ $45, but 16 kits cost $46 > $45 ✓.
Common mistakes
  • B (16): rounded up instead of down
  • C (18): ignored the fixed fee
  • D (20): added the fee instead of subtracting it

Mixture problems

Method. Balance the differences: 90 × (25 − 10) = y × (50 − 25).

Worked example
How many liters of a 50% acid solution must be added to 90 liters of a 10% acid solution to make a 25% acid solution?
A54
B90
C144
D150
AnswerA — 54
Step-by-step
  1. Let y = liters of the 50% solution.
  2. Acid: 0.1(90) + 0.5y = 0.25(90 + y).
  3. Multiply by 100: 900 + 50y = 2250 + 25y.
  4. Collect: 25y = 1350.
  5. Divide: y = 54 liters.
Quick checkacid = 9 + 27 = 36 liters, and 25% of 144 = 36 ✓.
Common mistakes
  • B (90): assumed equal amounts of the two solutions
  • C (144): gave the total amount of the mixture
  • D (150): inverted the ratio of the differences

01.02 Functions

CLT function questions use function notation, custom operations defined in the question, and linear, quadratic, exponential, polynomial and basic logarithmic functions, with their graphs and transformations.

Function Concepts

A function gives exactly one output for each input. Evaluate by substitution, read domain and range, compose functions, and find inverses by swapping x and y.

Key formulas
Evaluate
Composition
Inverse
Inverse check
Vertical line test
Even and odd functions
Transformations

Function notation — evaluating

Method. Put negative inputs in parentheses; square before multiplying by the coefficient.

Worked example
If f(x) = 4 + 4x − 1, what is f(−3)?
A23
B25
C47
D131
AnswerA — 23
Step-by-step
  1. Substitute x = −3 with parentheses: f(−3) = 4 + 4(−3) − 1.
  2. Square first: = 9.
  3. Then 36 − 12 − 1 = 23.
Quick check = 9 (a square is never negative), so f(−3) = 36 − 12 − 1 ✓.
Common mistakes
  • B (25): made a sign error with the constant
  • C (47): evaluated f(3) instead of f(−3)
  • D (131): multiplied by 4 before squaring

Range

Method. Range of a parabola = from the vertex y-value upward (a > 0) or downward (a < 0).

Worked example
What is the range of f(x) = −2 − 9?
Ay ≥ −9
By ≤ 3
Cy ≤ 9
Dy ≤ −9
AnswerD — y ≤ −9
Step-by-step
  1. The vertex form a + k has vertex (3, −9).
  2. Since a = −2 is negative, the parabola opens down.
  3. So −9 is the greatest value.
  4. The range is y ≤ −9.
Quick check ≥ 0, so −2 times it is ≤ 0 and f(x) ≤ −9 ✓.
Common mistakes
  • A (y ≥ −9): reversed the direction of the parabola
  • B (y ≤ 3): used the x-coordinate of the vertex
  • C (y ≤ 9): used the wrong sign for the vertical shift

Piecewise functions

Method. First pick the piece whose condition the input satisfies (watch < versus ≤ at the boundary).

Worked example
The function f is defined by f(x) = −2x − 1 for x < 1, and f(x) = −2 + 7 for x ≥ 1. What is f(3)?
A−11
B−7
C−5
D11
AnswerA — −11
Step-by-step
  1. Decide which piece applies: x = 3 satisfies x ≥ 1.
  2. So use f(x) = −2 + 7.
  3. Substitute: f(3) = −2 + 7 = −11.
Quick checkthe other piece would give −7, but 3 does not satisfy its condition ✓.
Common mistakes
  • B (−7): used the wrong piece
  • C (−5): doubled instead of squaring
  • D (11): made a sign error

Reading key features from graphs

Method. Inputs are read on the x-axis, outputs on the y-axis.

Worked example
The graph of y = f(x) is shown, with a closed dot at each end. What is the domain of f?
Figure for the worked example
A−6 ≤ x ≤ 6
B−5 ≤ x ≤ 3
C−6 < x < 6
Dall real numbers
AnswerA — −6 ≤ x ≤ 6
Step-by-step
  1. The domain is the set of x-values the graph covers.
  2. The graph starts at x = −6 and ends at x = 6, with both endpoints included.
  3. So the domain is −6 ≤ x ≤ 6.
Quick checkthe left end is (−6, 3) and the right end is (6, −5) ✓.
Common mistakes
  • B (−5 ≤ x ≤ 3): gave the y-values (range) instead of the x-values
  • C (−6 < x < 6): left out the endpoints
  • D (all real numbers): assumed the graph continues forever

Even and odd functions

Method. Even: mirror in the y-axis (same output). Odd: rotate 180° about the origin (opposite output).

Worked example
f is an even function and f(3) = −6. What is f(−3)?
A−6
B−
C
D6
AnswerA — −6
Step-by-step
  1. An even function satisfies f(−x) = f(x) for every x.
  2. So f(−3) = f(3) = −6.
Quick checkfor example, f(x) = has f(−x) = , matching the even rule ✓.
Common mistakes
  • B (−): took the reciprocal
  • C (): took the negative reciprocal
  • D (6): treated f as odd

One-to-one functions

Method. Look for a symmetric graph : symmetry means two inputs share each output.

Worked example
Which function is one-to-one?
Af(x) = 3ˣ
Bf(x) = − 4x
Cf(x) = − 2
Df(x) =
AnswerA — f(x) = 3ˣ
Step-by-step
  1. A function is one-to-one when different inputs always give different outputs (it passes the horizontal line test).
  2. 3ˣ is always increasing.
  3. So no two inputs share an output.
  4. Each other choice repeats an output for two different inputs.
Quick checkf(x) = 3ˣ increases for every x in its domain, so it never takes the same value twice ✓.
Common mistakes
  • B (f(x) = − 4x): missed that f(0) = f(4)
  • C (f(x) = − 2): missed that f(−1) = f(1)
  • D (f(x) = ): missed that f(−4) = f(0)

Nonlinear patterns

Method. If the changes grow by a constant amount, compare the outputs with the square numbers.

Worked example
The table shows a pattern. Input: 1, 2, 3, 4. Output: 1, 4, 9, 16. If the pattern continues, what is the output when the input is 7?
A14
B37
C43
D49
AnswerD — 49
Step-by-step
  1. The changes in output are 3, 5, 7, which grow by 2.
  2. So the rule involves squaring.
  3. Compare with the squares: 1 = , 4 = , 9 = , 16 = .
  4. The rule is output = (input)².
  5. For 7: = 49.
Quick checkthe rule gives 1, 4, 9, 16 for inputs 1, 2, 3, 4 ✓.
Common mistakes
  • A (14): doubled the input instead of squaring it
  • B (37): continued with the last change in y as if the function were linear
  • C (43): added the next change in y once for every step

Function notation — expressions

Method. Substitute the whole expression for x with parentheses, then expand.

Worked example
If f(x) = − + 2x − 7, which expression is equal to f(x − 2)?
A− + 2x − 9
B− + 2x − 15
C− + 6x − 11
D− + 6x − 15
AnswerD — − + 6x − 15
Step-by-step
  1. Replace every x with (x − 2): f(x − 2) = − + 2(x − 2) − 7.
  2. Expand: = − 4x + 4.
  3. So f(x − 2) = − + 4x − 4 + 2x − 4 − 7.
  4. Combine like terms: − + 6x − 15.
Quick checkCheck at x = 0: f(−2) = −15, and the answer at x = 0 is −15 ✓.
Common mistakes
  • A (− + 2x − 9): added −2 to the output instead of the input
  • B (− + 2x − 15): squared (x − 2) as + 4
  • C (− + 6x − 11): replaced x only in the squared term

Linear Functions

A linear function has a constant rate of change. Use slope-intercept or point-slope form.

Key formulas
Slope
Slope-intercept
Point-slope
Standard form of a line

Initial value from a table

Method. Initial value = first y − rate × first x.

Worked example
The table shows a linear function. x: 3, 4, 5, 6; y: −27, −33, −39, −45. What is the value of y when x = 0?
A−27
B−21
C−9
D−6
AnswerC — −9
Step-by-step
  1. Rate of change: (−33 − (−27)) ÷ 1 = −6.
  2. Going from x = 3 back to x = 0 is 3 units.
  3. So y changes by −6 × (−3) = 18.
  4. So y(0) = −27 + 18 = −9.
Quick checky = −6x − 9 gives −33 at x = 4, matching the table ✓.
Common mistakes
  • A (−27): gave the first y-value in the table
  • B (−21): went back only one unit of x
  • D (−6): gave the rate of change

Rate and initial value in context

Method. Two data points → rate = Δamount ÷ Δtime; initial value = amount − rate × time.

Worked example
A plant is 48 centimeters tall after 4 days and 56 centimeters tall after 5 days. Its height changes at a constant rate. What is the rate of change, in centimeters per day?
A−8
B
C8
D
AnswerC — 8
Step-by-step
  1. Rate = (change in amount) ÷ (change in time).
  2. Rate = (56 − 48) ÷ (5 − 4) = 8 ÷ 1.
  3. So Rate = 8 centimeters per day.
Quick check48 + 8 × 1 = 56 ✓.
Common mistakes
  • A (−8): made a sign error (ignored whether the amount went up or down)
  • B (): divided the change in time by the change in amount
  • D (): divided an amount by its time

Linear function from two points

Method. Slope from the two points, then b = y − mx with either point.

Worked example
A linear function passes through (−1, −4) and (5, 20). Which equation defines it?
Ay = 4x
By = x −
Cy = 4x − 8
Dy = −4x − 8
AnswerA — y = 4x
Step-by-step
  1. Slope: (20 − (−4)) ÷ (5 − (−1)) = 24 ÷ 6 = 4.
  2. Intercept: substitute (−1, −4) into y = 4x + b: −4 = −4 + b.
  3. So b = 0.
  4. The equation is y = 4x.
Quick checkat x = 5, 4(5) + 0 = 20 ✓.
Common mistakes
  • B (y = x − ): divided the change in x by the change in y
  • C (y = 4x − 8): made a sign error finding the intercept
  • D (y = −4x − 8): made a sign error in the slope

Comparing linear models

Method. Equal cost: difference in fees ÷ difference in rates.

Worked example
Plan A costs $78 to join plus $7 per month. Plan B costs $26 to join plus $8 per month. After how many months do the two plans cost the same total amount?
A
B
C
D52
AnswerD — 52
Step-by-step
  1. Set the costs equal: 78 + 7m = 26 + 8m.
  2. Move the m-terms to one side and the constants to the other: −m = −52.
  3. Divide: m = 52 months.
Quick checkPlan A costs 78 + 7 × 52 = 442; Plan B costs 26 + 8 × 52 = 442 ✓.
Common mistakes
  • A (): added the rates instead of subtracting them
  • B (): divided by one rate instead of the difference of the rates
  • C (): added the fees and the rates

Arithmetic sequences as linear functions

Method. Arithmetic sequence = linear function of n with slope = common difference.

Worked example
The sequence −9, −6, −3, 0, … is arithmetic. What is term 14?
A−126
B30
C33
D42
AnswerB — 30
Step-by-step
  1. The common difference is −6 − (−9) = 3.
  2. Term n = first term + (n − 1) × difference = −9 + 13 × 3 = 30.
Quick checkthe linear rule f(n) = 3n − 12 gives f(1) = −9 and f(14) = 30 ✓.
Common mistakes
  • A (−126): multiplied the first term by n
  • C (33): used n instead of n − 1
  • D (42): forgot the first term

Solving with linear models

Method. Undo the model: subtract the start value, divide by the rate.

Worked example
The equation H = 10d + 54 gives the height H, in centimeters, of a plant d days after it was measured. For what value of d is H = 194?
A14
B
C
D1994
AnswerA — 14
Step-by-step
  1. Substitute H = 194: 194 = 10d + 54.
  2. Subtract 54: 140 = 10d.
  3. Divide by 10: d = 14.
Quick check10(14) + 54 = 140 + 54 = 194 ✓.
Common mistakes
  • B (): ignored the constant
  • C (): added the constant instead of subtracting it
  • D (1994): evaluated H at 194 instead of solving

Quadratic Functions

Parabolas: the vertex is the turning point, the axis of symmetry passes through it, and the sign of a tells the direction.

Key formulas
Vertex form
Axis of symmetry
Factored form
Max/min
Average rate of change

Vertex form

Method. Vertex form: change the sign inside the parentheses, keep the sign of k.

Worked example
What is the vertex of the graph of f(x) = 3 + 9?
A(−6, 9)
B(6, −9)
C(9, 6)
D(6, 9)
AnswerD — (6, 9)
Step-by-step
  1. In vertex form f(x) = a + k the vertex is (h, k).
  2. Here x − 6 = x − (6).
  3. So h = 6, and k = 9.
  4. The vertex is (6, 9).
Quick checkf(6) = 3 + 9 = 9, and every other x gives a value above 9 ✓.
Common mistakes
  • A ((−6, 9)): used the sign inside the parentheses
  • B ((6, −9)): used the wrong sign for k
  • C ((9, 6)): swapped the coordinates

Factored form and intercepts

Method. Factored form a(x − p)(x − q): zeros p and q, vertex halfway, y-intercept a·p·q.

Worked example
What are the x-intercepts of the graph of f(x) = −(x + 4)(x − 5)?
Ax = −5 and x = 4
Bx = −4 and x = 5
Cx = 20
Dx = −5 and x = −4
AnswerB — x = −4 and x = 5
Step-by-step
  1. x-intercepts are where f(x) = 0.
  2. A product is 0 when a factor is 0: x + 4 = 0 gives x = −4.
  3. x − 5 = 0 gives x = 5.
  4. So x = −4 and x = 5.
Quick checkf(−4) = −(0)(−9) = 0 ✓.
Common mistakes
  • A (x = −5 and x = 4): used the signs shown in the factors
  • C (x = 20): gave the y-intercept
  • D (x = −5 and x = −4): changed the sign of only one zero

Graphs of quadratic functions

Method. Read the vertex from the grid; check the direction and the step from the vertex for a.

Worked example
The graph of a quadratic function is shown. What is the vertex of the graph?
Figure for the worked example
A(1, −2)
B(2, 1)
C(−2, 1)
D(−2, −1)
AnswerC — (−2, 1)
Step-by-step
  1. The vertex is the turning point of the parabola: its lowest point.
  2. Reading the grid, it is at x = −2, y = 1.
  3. So the vertex is (−2, 1).
Quick checkthe graph passes through (−1, 2) and (−3, 2), one unit either side of the vertex ✓.
Common mistakes
  • A ((1, −2)): swapped the coordinates
  • B ((2, 1)): misread the sign of the x-coordinate
  • D ((−2, −1)): misread the sign of the y-coordinate

Vertex and axis from standard form

Method. x-vertex = −; plug it back in for the y-coordinate.

Worked example
What is the vertex of the graph of f(x) = −2 − 24x − 78?
A(6, −294)
B(−12, −78)
C(−6, −6)
D(−6, −78)
AnswerC — (−6, −6)
Step-by-step
  1. The x-coordinate of the vertex is − = − = −6.
  2. The y-coordinate is f(−6) = −72 + 144 − 78 = −6.
  3. So the vertex is (−6, −6).
Quick checkin vertex form f(x) = −2 − 6, which expands to −2 − 24x − 78 ✓.
Common mistakes
  • A ((6, −294)): used instead of −
  • B ((−12, −78)): forgot the 2 in −
  • D ((−6, −78)): used c as the y-coordinate

Maximum and minimum values

Method. Minimum value = f, the y-coordinate of the vertex.

Worked example
What is the minimum value of f(x) = 2 − 16x + 45?
A4
B13
C45
D141
AnswerB — 13
Step-by-step
  1. a = 2 is positive.
  2. So the parabola opens up and has a minimum at the vertex.
  3. x = − = 4.
  4. f(4) = 32 − 64 + 45 = 13.
  5. The minimum value is 13.
Quick checkf(3) = 15 and f(5) = 15 are both greater than 13 ✓.
Common mistakes
  • A (4): gave the x-value where the minimum occurs
  • C (45): gave the y-intercept
  • D (141): used the wrong sign for the x-coordinate of the vertex

Projectile models

Method. Time of max = −; max height = h of that time.

Worked example
A ball is thrown upward. Its height, in meters, after t seconds is h(t) = −5 + 5t + 1. After how many seconds does the ball reach its maximum height?
A0.5
B1
C2.25
D2.5
AnswerA — 0.5
Step-by-step
  1. The maximum is at the vertex.
  2. t = −.
  3. t = − = .
  4. So t = 0.5 seconds.
Quick checkthe heights at t = 0 and t = 1 are equal (1), so the peak is halfway at 0.5 ✓.
Common mistakes
  • B (1): used − instead of −
  • C (2.25): gave the maximum height instead of the time
  • D (2.5): divided b by 2 only

Area optimization

Method. Write area as a quadratic in one side; the maximum is at the vertex.

Worked example
A rectangular pen is built against a long wall, so only three sides need fence. There are 224 meters of fence. What is the greatest possible area of the pen, in square meters?
A56
B112
C3136
D6272
AnswerD — 6272
Step-by-step
  1. Let each side touching the wall be w.
  2. The side parallel to the wall is 224 − 2w.
  3. A(w) = w(224 − 2w) = −2 + 224w.
  4. The vertex is at w = = 56.
  5. So the other side is 224 − 112 = 112.
  6. Area = 56 × 112 = 6272.
Quick checkw = 57 gives 6270 and w = 55 gives 6270, both less than 6272 ✓.
Common mistakes
  • A (56): gave the width instead of the area
  • B (112): gave the length instead of the area
  • C (3136): fenced all four sides

Transformations of quadratics

Method. Inside the square: opposite direction (x − h shifts right). Outside: same direction.

Worked example
The graph of f(x) = is reflected across the x-axis, then shifted 4 units right, then shifted 6 units up to give the graph of g. Which equation defines g?
Ag(x) = − + 6
Bg(x) = − − 6
Cg(x) = − + 6
Dg(x) = + 6
AnswerC — g(x) = − + 6
Step-by-step
  1. A reflection across the x-axis multiplies by −1.
  2. A shift 4 right replaces x with x − 4.
  3. A shift 6 up adds 6.
  4. So g(x) = − + 6.
Quick checkthe vertex of g is (4, 6), which is (0, 0) moved 4 right and 6 up ✓.
Common mistakes
  • A (g(x) = − + 6): used the wrong direction for the horizontal shift
  • B (g(x) = − − 6): used the wrong direction for the vertical shift
  • D (g(x) = + 6): missed the reflection

Average rate of change

Method. For ax² + bx + c the average rate from p to q equals a(p + q) + b.

Worked example
What is the average rate of change of f(x) = 3 − 4x − 8 from x = −3 to x = 4?
A−7
B−1
C1
D
AnswerB — −1
Step-by-step
  1. Average rate of change = (f(4) − f(−3)) ÷ (4 − (−3)).
  2. f(4) = 24 and f(−3) = 31.
  3. So (24 − 31) ÷ 7 = −7 ÷ 7 = −1.
Quick checka(p + q) + b = 3 × 1 − 4 = −1 ✓.
Common mistakes
  • A (−7): did not divide by the change in x
  • C (1): subtracted in the wrong order
  • D (): added the function values

Second differences

Method. Quadratic ⇔ constant second differences; second difference = 2a for x-steps of 1.

Worked example
The table shows values of a quadratic function f. x: 0, 1, 2, 3, 4; f(x): −6, 1, 10, 21, 34. What is the coefficient of in f(x)?
A−6
B−1
C1
D2
AnswerC — 1
Step-by-step
  1. First differences: 7, 9, 11, 13.
  2. Second differences: all 2.
  3. For f(x) = ax² + bx + c with x-steps of 1 the second difference is 2a.
  4. So a = 2 ÷ 2 = 1.
Quick checkf(x) = + 6x − 6 gives −6, 1, 10, 21, 34 ✓.
Common mistakes
  • A (−6): gave the value at x = 0
  • B (−1): made a sign error
  • D (2): gave the second difference without halving it

Parameters and the discriminant

Method. One x-intercept: c = (a perfect-square trinomial).

Worked example
For what value of c does the graph of f(x) = − 6x + c touch the x-axis at exactly one point?
A−9
B3
C9
D18
AnswerC — 9
Step-by-step
  1. Exactly one x-intercept means the discriminant is 0: − 4(1)(c) = 0.
  2. So 36 − 4c = 0 and c = = 9.
Quick checkwith c = 9, f(x) = , which is 0 only at x = 3 ✓.
Common mistakes
  • A (−9): made a sign error
  • B (3): used instead of
  • D (18): used 2 instead of 4 in − 4ac

Exponential Functions

Growth or decay by a constant factor each step. In f(x) = a·bˣ with a > 0, a base b > 1 grows and 0 < b < 1 decays; the y-intercept is a.

Key formulas
Exponential function
Growth / decay
Half-life
Doubling
Compound interest

Repeated multiplication

Method. Growth by a factor each period: start × facto.

Worked example
A colony starts with 5 bacteria, and the number triples every hour. How many bacteria are there after 3 hours?
A14
B27
C45
D135
AnswerD — 135
Step-by-step
  1. Each hour multiplies the number by 3.
  2. After 3 hours: 5 × = 5 × 27 = 135.
Quick check5 → 15 → 45 → 135 after 3 steps ✓.
Common mistakes
  • A (14): added the factor once per period
  • B (27): forgot the starting amount
  • C (45): multiplied by the factor once for each period (linear growth)

Growth patterns

Method. Term n = first term × rati.

Worked example
The pattern 6, 18, 54, 162, … continues by multiplying by the same number each time. What is term 8?
A126
B594
C2187
D13122
AnswerD — 13122
Step-by-step
  1. Each term is 3 times the one before.
  2. Term 8 is the first term multiplied by 3 a total of 7 times: 6 × = 6 × 2187 = 13122.
Quick checkcontinuing the list gives 6, 18, 54, 162, 486, 1458, 4374, 13122; term 8 is 13122 ✓.
Common mistakes
  • A (126): multiplied instead of using an exponent
  • B (594): continued with the last difference (linear pattern)
  • C (2187): forgot the first term

Evaluating exponential functions

Method. Raise the base to the power first, then multiply by the coefficient.

Worked example
If f(x) = 5 · ˣ, what is f(−2)?
A−
B
C45
D135
AnswerC — 45
Step-by-step
  1. Substitute x = −2: f(−2) = 5 × .
  2. First the power: = 9.
  3. Then multiply: 5 × 9 = 45.
Quick checkf(−2) ÷ f(−3) = , the base ✓.
Common mistakes
  • A (−): multiplied by the exponent instead of raising to a power
  • B (): multiplied 5 and before raising to the power
  • D (135): used one power too many: 5 × = 5 × 27

Growth and decay rates

Method. Factor b = 1 + r for growth, 1 − r for decay; rate = distance of b from 1.

Worked example
The function f(t) = 3,000 · (1.15)ᵗ models a quantity t years from now. Which describes the change?
Agrowth of 15% per year
Bdecay of 15% per year
Cgrowth of 115% per year
Ddecay of 115% per year
AnswerA — growth of 15% per year
Step-by-step
  1. In f(t) = a · bᵗ, b > 1 means growth and 0 < b < 1 means decay.
  2. Here b = 1.15 is greater than 1.
  3. The rate is |b − 1| = |1.15 − 1| = 0.15 = 15%.
  4. So it is growth of 15% per year.
Quick check1.15 = 1 + 0.15, so each year the amount is multiplied by 1 + 0.15 ✓.
Common mistakes
  • B (decay of 15% per year): confused growth with decay
  • C (growth of 115% per year): used the factor itself as the percent
  • D (decay of 115% per year): used the factor as the percent and the wrong direction

Compound interest

Method. Rate per period = ; number of periods = n·t.

Worked example
$5,000 is invested at an annual interest rate of 12% compounded monthly. Which expression gives the value of the investment after t years?
A5,000
B5,000
C5,000ᵗ
D5,000
AnswerB — 5,000
Step-by-step
  1. Compound interest: A = P with P = 5000, r = 0.12 and n = 12 periods per year.
  2. Each period the rate is , and there are 12t periods in t years.
  3. So A = 5,000.
Quick checkafter 1 year (t = 1) the money has grown 12 times by the factor 1 + ✓.
Common mistakes
  • A (5,000): did not divide the rate by the number of periods
  • C (5,000ᵗ): did not multiply the time by the number of periods
  • D (5,000): multiplied the rate and divided the time

Doubling and half-life

Method. Count the periods (time ÷ period length), then multiply by 2 or that many times.

Worked example
An investment of $500 doubles every 2 years. What will it be worth after 10 years, in dollars?
A8000
B16000
C32000
D512000
AnswerB — 16000
Step-by-step
  1. The number of doubling periods is 10 ÷ 2 = 5.
  2. Value = 500 × = 500 × 32 = 16000.
Quick check500 → 1000 → 2000 → 4000 → 8000 → 16000 over 5 periods ✓.
Common mistakes
  • A (8000): counted one period too few
  • C (32000): counted one period too many
  • D (512000): used 10 instead of as the exponent

Linear versus exponential models

Method. Constant difference → linear; constant ratio → exponential.

Worked example
A function has the values x: 0, 1, 2, 3 and y: 2, 6, 18, 54. Which describes the function?
AExponential, y = 2 · 3ˣ
BLinear, y = 2 + 4x
CExponential, y = 3 · 2ˣ
DLinear, y = 2 + 3x
AnswerA — Exponential, y = 2 · 3ˣ
Step-by-step
  1. Differences in y: 4, 12, 36.
  2. Ratios: 3, 3, 3.
  3. The ratios are constant (3).
  4. So the function is exponential with starting value 2: y = 2 · 3ˣ.
Quick checkthe model gives 2, 6, 18, 54 for x = 0, 1, 2, 3 ✓.
Common mistakes
  • B (Linear, y = 2 + 4x): used only the first difference
  • C (Exponential, y = 3 · 2ˣ): swapped the starting value and the ratio
  • D (Linear, y = 2 + 3x): treated the constant ratio as a constant difference

Exponential graphs

Method. Starting value = y at x = 0; base = (y at x = 1) ÷ (y at x = 0).

Worked example
The graph of an exponential function passes through the two marked points. Which equation defines the function?
Figure for the worked example
Af(x) = 4 · 2ˣ
Bf(x) = 4 · (0.5)ˣ
Cf(x) = −2x + 4
Df(x) = 2 · (0.5)ˣ
AnswerB — f(x) = 4 · (0.5)ˣ
Step-by-step
  1. The marked points are (0, 4) and (1, 2).
  2. For f(x) = a · bˣ, f(0) = a = 4.
  3. Then f(1) = a · b.
  4. So b = 2 ÷ 4 = .
  5. So f(x) = 4 · (0.5)ˣ.
Quick checkf(0) = 4 and f(1) = 4 × = 2, the two marked points ✓.
Common mistakes
  • A (f(x) = 4 · 2ˣ): inverted the base (growth versus decay)
  • C (f(x) = −2x + 4): fitted a line through the two marked points
  • D (f(x) = 2 · (0.5)ˣ): used the value at x = 1 as the starting value

Geometric sequences as exponential functions

Method. Geometric sequence = exponential function of n: a · .

Worked example
The geometric sequence −6, 12, −24, 48, … can be written as f(n) = a · . What is term 6?
A−384
B−32
C60
D192
AnswerD — 192
Step-by-step
  1. First term a = −6.
  2. Common ratio r = 12 ÷ (−6) = −2.
  3. Term 6 = −6 × = −6 × −32 = 192.
Quick checkcontinuing the list gives −6, 12, −24, 48, −96, 192 ✓.
Common mistakes
  • A (−384): used n instead of n − 1
  • B (−32): forgot the first term
  • C (60): multiplied instead of using an exponent

Percent growth and decay

Method. Multiply by (1 ± r) once per year — never add r·t.

Worked example
A tractor is worth $800 and its value decreases by 25% each year. What will it be worth after 3 years?
A$200
B$337.50
C$600
D$1,562.50
AnswerB — $337.50
Step-by-step
  1. Each year the value is multiplied by 1 − 0.25 = 0.75.
  2. After 3 years: $800 × = $800 × 0.421875 = $337.50.
Quick checkyear by year $800 → $600 → $450 → $337.50 ✓.
Common mistakes
  • A ($200): used simple (linear) change instead of compounding
  • C ($600): applied the change only once
  • D ($1,562.50): used the wrong direction of change

Exponential functions from two points

Method. Ratio of outputs = ; then take the root.

Worked example
An exponential function f(x) = a · bˣ passes through (1, 4) and (3, 64). What is b?
A4
B8
C16
D30
AnswerA — 4
Step-by-step
  1. Divide the outputs: f(3) ÷ f(1) = = .
  2. So = 64 ÷ 4 = 16.
  3. Take the root: b = 4 (b > 0).
Quick checkf(3) = f(1) × = 4 × = 64 ✓.
Common mistakes
  • B (8): divided the ratio by the change in x
  • C (16): did not take the root of the ratio
  • D (30): found the linear slope instead of the growth factor

Changing time units

Method. Per-month factor = (yearly factor)^.

Worked example
A quantity is modeled by Q(t) = 500 · (1.06)ᵗ, where t is in years. By what factor does the quantity grow each month?
A
B
C1 +
D
AnswerB —
Step-by-step
  1. Let m be the monthly growth factor.
  2. There are 12 months in a year.
  3. So = 1.06.
  4. So m = , and Q can be written 500 · .
Quick check = 1.06, the yearly factor ✓.
Common mistakes
  • A (): divided the yearly factor by 12
  • C (1 + ): divided the yearly rate by 12
  • D (): raised the factor to the power 12

Logarithmic Functions

y = log_b x is the inverse of y = bˣ: domain x > 0, vertical asymptote x = 0, passes through (1, 0).

Key formulas
Inverse pair
Key point
Domain

Evaluating logarithms

Method. log_b N = the exponent that turns b into N.

Worked example
What is the value of log₆ 216?
A3
B4
C36
D1296
AnswerA — 3
Step-by-step
  1. log₆ 216 asks: to what power must 6 be raised to give 216? 216 = .
  2. So log₆ 216 = 3.
Quick checkraising 6 to the power 3 gives = 216 ✓.
Common mistakes
  • B (4): counted one power too many
  • C (36): divided the number by the base
  • D (1296): multiplied the number by the base

Exponential and logarithmic form

Method. log_b N = e ⇔ bᵉ = N: the base stays the base.

Worked example
Which equation is equivalent to log₅ x = 3?
Ax =
Bx =
Cx = 5 · 3
D5 =
AnswerB — x =
Step-by-step
  1. log_b x = e means bᵉ = x.
  2. Here b = 5 and e = 3.
  3. So x = .
Quick check = 125, so both forms say the same thing ✓.
Common mistakes
  • A (x = ): swapped the base and the exponent
  • C (x = 5 · 3): multiplied the base by the exponent
  • D (5 = ): made x the base

01.03 Exponents and Radicals

This topic covers the laws of exponents, rational exponents, radicals, and arithmetic and geometric sequences. Without a calculator, rewrite numbers as powers of the same base and simplify radicals by factoring.

Exponents and Radicals

Exponents count repeated multiplication, and radicals undo powers. Most CLT items test the exponent laws, negative and fractional exponents, and simplifying or combining square roots.

Key formulas
Product rule
Quotient rule
Power rule
Power of a product
Zero exponent
Negative exponent
Fractional exponent
Product of roots
Rationalizing
Scientific notation
Common base

Scientific notation — operations

Method. Work with the first factors and the powers of 10 separately, then make the first factor between 1 and 10.

Worked example
What is × ? Write the answer in scientific notation.
A2.871 ×
B1.2 ×
C28.71 ×
D2.871 ×
AnswerD — 2.871 ×
Step-by-step
  1. Multiply the first factors: 3.3 × 8.7 = 28.71.
  2. Add the exponents: × = .
  3. Rewrite 28.71 as 2.871 × : answer 2.871 × .
Quick checkEstimate with the first factors rounded: the size of the answer is about .
Common mistakes
  • A (2.871 × ): multiplied the exponents instead of adding them
  • B (1.2 × ): added the first factors instead of multiplying
  • C (28.71 × ): did not rewrite the first factor between 1 and 10

Rational exponents

Method. Take the root first (smaller numbers), then the power; a negative exponent flips the result.

Worked example
What is ?
A
B4
C24
D64
AnswerD — 64
Step-by-step
  1. The denominator 2 means a square root and the numerator 3 means a power.
  2. = .
  3. = .
  4. So = 64.
Quick check = 16, so the square root of 16 is 4; then = 64.
Common mistakes
  • A (): took the reciprocal for no reason
  • B (4): took the root but ignored the power
  • C (24): multiplied the base by the exponent

Simplify square roots

Method. Divide 490 by perfect squares from largest to smallest (49, 36, 25, 16, …) until one divides evenly.

Worked example
Which is in simplest form?
A49
B7 +
C10
D7
AnswerD — 7
Step-by-step
  1. Find the largest perfect square factor of 490: 490 = 49 × 10.
  2. Then = × = 7, and 10 has no square factor left.
Quick checkCheck by squaring: = 49 × 10 = 490, the number under the root.
Common mistakes
  • A (49): took out the perfect square without taking its square root
  • B (7 + ): split the root of a product into a sum of roots
  • C (10): swapped the outside number and the number under the root sign

Operations with radicals

Method. · = ; then pull out the largest square factor.

Worked example
What is · in simplest form?
A
B2
C
D4
AnswerB — 2
Step-by-step
  1. Multiply under one root: · = .
  2. Simplify: 60 = 4 × 15.
  3. So = 2.
Quick check = 4 × 15 = 60 = 5 × 12 ✓.
Common mistakes
  • A (): added the numbers under the root signs
  • C (): did not simplify the product, so it is not in simplest form
  • D (4): took out the perfect square without taking its square root

Rationalize the denominator

Method. Use = a: multiply the top by and divide by 7.

Worked example
Which is equal to with a rational denominator?
A6
B6
C
D6
AnswerB — 6
Step-by-step
  1. Multiply top and bottom by .
  2. = 6.
Quick checkmultiply each by : · = = 6 and · = 6, so the two are equal ✓.
Common mistakes
  • A (6): multiplied only the top by the root
  • C (): cancelled the root sign as if were 7
  • D (6): multiplied top and bottom by but took · to be 49

Exponent laws with fractional exponents

Method. The laws are the same for fraction exponents; add them with a common denominator.

Worked example
Which expression is equal to · ? (Assume b > 0.)
A
B
C
D
AnswerC —
Step-by-step
  1. Same base.
  2. So add the exponents: + = .
  3. Answer: .
Quick checkRename with denominator 4: = and = ; their sum is .
Common mistakes
  • A (): multiplied the exponents instead of adding them
  • B (): added the tops and the bottoms of the exponents
  • D (): subtracted the exponents

Equivalent exponential forms — same exponent

Method. Same exponent → multiply bases; same base → add exponents.

Worked example
Which expression is equivalent to 2^x · 7^x?
A9^x
B
C
D14^x
AnswerD — 14^x
Step-by-step
  1. When the exponents are the same, multiply the bases: aˣ · bˣ = (ab)ˣ.
  2. So 2^x · 7^x = (2 · 7)^x = 14^x.
Quick checkTest x = 2: · = 196 and = 196.
Common mistakes
  • A (9^x): added the bases
  • B (): multiplied the bases and added the exponents
  • C (): used one base as an exponent

Equivalent exponential expressions — split the exponent

Method. An added constant in the exponent becomes a multiplied constant out front (subtracted → divided).

Worked example
Which expression is equivalent to ?
A25 · 5^x
B5^x + 25
C10 · 5^x
D
AnswerA — 25 · 5^x
Step-by-step
  1. Use bᵐ⁺ⁿ = bᵐ · bⁿ.
  2. = 5^x · .
  3. So = 25 · 5^x.
Quick checkTest x = 1: and 25 · give the same number.
Common mistakes
  • B (5^x + 25): added instead of multiplying
  • C (10 · 5^x): multiplied the base by the added number
  • D (): multiplied the exponents

Solve exponential equations with a common base

Method. Count how many times you divide 729 by 3 to reach 1 (6), then subtract 4.

Worked example
If = 729, what is x?
A2
B6
C239
D725
AnswerA — 2
Step-by-step
  1. Write 729 as a power of 3: 729 = .
  2. Equal bases → equal exponents: x + 4 = 6.
  3. So x = 2.
Quick checkSubstitute to check: = = 729, the right side.
Common mistakes
  • B (6): set x equal to the whole exponent of the right side
  • C (239): divided the right side by the base and subtracted
  • D (725): subtracted from the right side instead of comparing exponents

Equivalent exponential forms — rewrite the base

Method. Compute once; that number becomes the new base.

Worked example
Which expression is equivalent to ?
A(4.8)^t
B(1.8)^t
C(2.0736)^t
D4(1.2)^t
AnswerC — (2.0736)^t
Step-by-step
  1. Use .
  2. = ^t.
  3. So = (2.0736)^t.
Quick checkTest t = 1: = 2.0736, which matches .
Common mistakes
  • A ((4.8)^t): multiplied the growth factor by the exponent
  • B ((1.8)^t): multiplied the percent by the exponent (simple instead of compound)
  • D (4(1.2)^t): moved the exponent in front as a coefficient

Sequences and Series

Arithmetic sequences add a common difference; geometric sequences multiply by a common ratio.

Key formulas
Arithmetic term
Arithmetic sum
Geometric term
Geometric sum
Infinite geometric sum

nth term of an arithmetic sequence

Method. From term 1 to term 20 there are 19 steps of 4.

Worked example
What is the 20th term of the arithmetic sequence −2, 2, 6, 10, …?
A74
B76
C78
D80
AnswerA — 74
Step-by-step
  1. aₙ = a₁ + (n − 1)d with a₁ = −2 and d = 4.
  2. a₂₀ = −2 + 19 × 4.
  3. So a₂₀ = 74.
Quick checka₄ = −2 + 3 × 4 = 10, matching the fourth term shown.
Common mistakes
  • B (76): forgot to add the first term
  • C (78): used n instead of n − 1
  • D (80): multiplied n by the difference only

nth term of a geometric sequence

Method. Keep multiplying by −2, or use 4 × .

Worked example
What is the 9th term of the geometric sequence 4, −8, 16, −32, …?
A−2048
B−512
C−64
D1024
AnswerD — 1024
Step-by-step
  1. aₙ = a₁ · with a₁ = 4 and r = −2.
  2. a₉ = 4 · .
  3. So a₉ = 1024.
Quick checka₄ = 4 · = −32, matching the fourth term shown.
Common mistakes
  • A (−2048): used n instead of n − 1 as the exponent
  • B (−512): used n − 2 as the exponent
  • C (−64): multiplied by the ratio times n − 1 instead of using a power

Explicit formula for an arithmetic sequence

Method. The slope is the common difference (−7); the constant is the 'zeroth' term 10 − (−7) = 17.

Worked example
Which formula gives the nth term of the sequence 10, 3, −4, −11, …?
Aaₙ = −7n + 10
Baₙ = −7n + 17
Caₙ = 10n − 17
Daₙ = −7n + 3
AnswerB — aₙ = −7n + 17
Step-by-step
  1. aₙ = a₁ + (n − 1)d.
  2. aₙ = 10 + (n − 1)(−7).
  3. So aₙ = −7n + 17.
Quick checkn = 1 gives 10 and n = 2 gives 3, matching the sequence.
Common mistakes
  • A (aₙ = −7n + 10): used the first term as the constant (forgot the n − 1)
  • C (aₙ = 10n − 17): swapped the first term and the common difference
  • D (aₙ = −7n + 3): added the difference to the first term instead of subtracting

Explicit formula for a geometric sequence

Method. Geometric: first term times ratio to the power (n − 1).

Worked example
Which formula gives the nth term of the sequence 7, 14, 28, 56, …?
Aaₙ = 7 · 2^n
Baₙ =
Caₙ = 7 ·
Daₙ = 2 ·
AnswerC — aₙ = 7 ·
Step-by-step
  1. The ratio is 14 ÷ 7 = 2.
  2. aₙ = a₁ · = 7 · .
Quick checkn = 3 gives 7 · = 28, the third term.
Common mistakes
  • A (aₙ = 7 · 2^n): used n instead of n − 1 as the exponent
  • B (aₙ = ): multiplied the first term and the ratio before raising to the power
  • D (aₙ = 2 · ): swapped the first term and the ratio

Recursive sequences

Method. List the terms in order; each new term uses only the term just before it.

Worked example
A sequence is defined by a₁ = 4 and aₙ = 3aₙ₋₁ + 6 for n ≥ 2. What is a₃?
A18
B60
C72
D186
AnswerB — 60
Step-by-step
  1. Apply the rule step by step: a₁ = 4, a₂ = 18, a₃ = 60.
  2. So a₃ = 60.
Quick checkCheck the last step: 3 × 18 + 6 = 60, which matches the rule.
Common mistakes
  • A (18): applied the rule one time too few
  • C (72): added before multiplying in the last step
  • D (186): applied the rule one time too many

Arithmetic sequences in context

Method. Count the steps: from 1 to 13 is 12 increases of 4.

Worked example
The first row of a theater has 25 seats, and each row has 4 more seats than the row in front of it. How many seats are in row 13?
A52
B73
C77
D325
AnswerB — 73
Step-by-step
  1. This is arithmetic with a₁ = 25 and d = 4.
  2. aₙ = 25 + (n − 1) × 4.
  3. So a₁₃ = 25 + 12 × 4 = 73.
Quick checkthe second term is 25 + 4 = 29, as described.
Common mistakes
  • A (52): forgot to start from the first term
  • C (77): used n instead of n − 1
  • D (325): multiplied the first term by n

Infinite geometric series — finding r

Method. Solve S = for r: r = 1 − .

Worked example
An infinite geometric series has first term 30 and sum 60. What is its common ratio?
A−
B
C
D2
AnswerB —
Step-by-step
  1. Use S = a ÷ (1 − r).
  2. So 60 = 30 ÷ (1 − r), which gives 1 − r = 30 ÷ 60 = .
  3. Then r = 1 − = .
Quick check30 ÷ = 30 ÷ = 60, the given sum ✓.
Common mistakes
  • A (−): got the sign of r wrong
  • C (): used 1 + instead of 1 −
  • D (2): divided the sum by the first term