Plane geometry on the CLT covers angles, parallel lines, triangles (congruence, similarity, the Pythagorean theorem), polygons and circles, including arcs, sectors, chords, tangents and inscribed angles. Figures are not drawn to scale unless the question says so, so reason from the given facts.
Lines and Angles
Angle pairs: complementary add to 90°, supplementary to 180°, vertical angles are equal. With parallel lines, corresponding and alternate angles are equal.
Key formulas
Complementary
a+b=90∘
Supplementary
a+b=180∘
Vertical angles
vertical angles are equal
Around a point
360∘
Parallel lines
corresponding and alternate interior angles equal; co-interior sum to 180∘
Angles on a clock
Method. Each hour mark is 30°; the hour hand also moves 0.5° per minute.
Worked example
What is the smaller angle between the hour hand and the minute hand of a clock at 4:30?
A30°
B45°
C60°
D315°
AnswerB — 45°
Step-by-step
The minute hand at 30 minutes points at 6, which is 180° from 12.
The hour hand moves 0.5° per minute.
So at 4:30 it is at 120° + 15° = 135°.
The difference is |135 − 180| = 45°.
So the smaller angle is 45°.
Quick checkthe hour hand is halfway between 4 and 5, and the angle is less than 180° ✓.
Common mistakes
A (30°): moved the hour hand a full hour
C (60°): forgot that the hour hand moves halfway to the next number
D (315°): measured the reflex angle
Parallel lines and transversals
Method. Parallel lines: all acute angles are equal, all obtuse angles are equal, and an acute + an obtuse = 180°.
Worked example
In the figure, lines ℓ and m are parallel. What is the value of x?
A7
B83
C97
D277
AnswerB — 83
Step-by-step
The angle marked 83° and the angle marked x° are corresponding angles.
With parallel lines, corresponding angles are equal.
So x = 83.
Quick checkone angle is acute and the other obtuse only when they add to 180°; here 83 and 83 are equal ✓.
Common mistakes
A (7): used complementary angles
C (97): assumed the angles are supplementary
D (277): subtracted from 360°
Angle relationships with algebra
Method. Write the angle relationship as an equation, then solve.
Worked example
Two angles measure (3x − 4)° and (6x − 5)°. The angles are supplementary. What is the value of x?
A (1): added half of each coefficient without squaring
C (199): added the squares of the full coefficients
D (43): gave r2 as the radius
Segments of chords, secants and tangents
Method. Chords: part × part. Secants and tangents: outside × whole.
Worked example
From point P outside a circle, a tangent segment of length x and a secant are drawn. The secant's external segment is 9 and its internal segment is 7. What is the value of x?
A (37): used the internal segment instead of the whole secant
B (130): used the Pythagorean theorem
D (144): forgot to take the square root
Angles formed by chords and secants
Method. Inside: ½(sum of arcs). Outside: ½(far − near).
Worked example
Two secants meet at a point outside a circle. They intercept a far arc of 211° and a near arc of 47°. What is the measure of the angle between the secants, in degrees?
A82
B2211
C129
D164
AnswerA — 82
Step-by-step
An angle formed outside a circle is half the difference of the intercepted arcs.
So the angle is (211° − 47°) ÷ 2 = 164° ÷ 2 = 82°.
Quick check2 × 82 = 164 = 211 − 47 ✓.
Common mistakes
B (2211): used only the far arc
C (129): added the arcs
D (164): forgot to halve the difference
Geometric Reasoning
Geometry questions on the CLT often ask what must be true from given facts. Use definitions and theorems step by step: parallel lines, congruent and similar triangles, properties of quadrilaterals, and the angle sums of polygons.
Key formulas
Angle sum of a polygon
(n−2)⋅180∘
Exterior angles
convex polygon, one per vertex: sum=360∘
Congruence
SSS, SAS, ASA, AAS; HL (right triangles)
Similarity
AA;sides in ratio k,areas in ratio k2
Parallelogram properties
opposite sides equal; diagonals bisect each other
Constructing triangles from conditions
Method. SSS, SAS, ASA fix one triangle; AAA allows many; impossible measurements give none.
Worked example
How many different triangles can be made with angles of 93°, 44° and 43°?
Aexactly one triangle
Bno triangle
Cmore than one triangle
Dexactly two triangles
AnswerC — more than one triangle
Step-by-step
The angles add to 180°.
So triangles exist, but any size works (similar triangles).
So more than one triangle is possible.
So the answer is more than one triangle.
Quick checkthe conditions match exactly one of the cases SSS/SAS/ASA, AAA or impossible ✓.
Common mistakes
A (exactly one triangle): thought the conditions fix a single triangle
B (no triangle): thought the conditions are impossible
D (exactly two triangles): thought each set of conditions gives two mirror-image triangles
02.02 Coordinate Geometry
Coordinate geometry covers slope, distance, midpoint, equations of lines, parallel and perpendicular lines, and equations of circles.
Coordinate Geometry
Distance and midpoint formulas come from the Pythagorean theorem and averaging.
Key formulas
Distance
d=(x2−x1)2+(y2−y1)2
Midpoint
(2x1+x2,2y1+y2)
Parallel
m1=m2
Perpendicular
m1m2=−1(neither line vertical)
Partition point
fraction t of the way from P1 to P2:(x1+t(x2−x1),y1+t(y2−y1))
Circle from expanded form
x2+y2+Dx+Ey+F=0:center(−2D,−2E),r2=4D2+E2−F
Distance formula
Method. Distance = Δx2+Δy2; look for a Pythagorean triple.
Worked example
What is the distance between (−6, −1) and (−21, −9)?
A161
B17
C23
D289
AnswerB — 17
Step-by-step
d = (x2−x1)2+(y2−y1)2.
The differences are −21 − (−6) = −15 and −9 − (−1) = −8.
So d = (−15)2+(−8)2 = 289 = 17.
Quick check172 = 289 = 225 + 64 ✓.
Common mistakes
A (161): subtracted the squares
C (23): added the horizontal and vertical distances
D (289): forgot to take the square root
Midpoint formula
Method. Midpoint: average the x's and average the y's.
Worked example
The midpoint of segment AB is (5, 3). Point A is (7, −4). What are the coordinates of point B?
A(6,−21)
B(−2, 7)
C(9, −11)
D(3, 10)
AnswerD — (3, 10)
Step-by-step
B = 2M − A.
So x = 2(5) − 7 = 3 and y = 2(3) − (−4) = 10.
So B = (3, 10).
Quick checkthe midpoint of (7, −4) and (3, 10) is (5, 3) ✓.
Common mistakes
A ((6,−21)): found the midpoint of the endpoint and the midpoint
B ((−2, 7)): subtracted the endpoint from the midpoint
C ((9, −11)): doubled the endpoint instead of the midpoint
Partitioning a segment
Method. P = A + (m+nm)(B − A).
Worked example
Point P lies on segment AB with A(−6, 3) and B(−1, −7), and AP : PB = 3 : 2. What are the coordinates of P?
A(−4, −1)
B(−3, −3)
C(−27,−2)
D(23,−12)
AnswerB — (−3, −3)
Step-by-step
P is 53 of the way from A to B.
The change from A to B is (5, −10).
53 of that is (3, −6).
So P = (−6 + 3, 3 + (−6)) = (−3, −3).
Quick checkAP is 53 of AB and PB is 52 of AB, a ratio of 3 : 2 ✓.
Common mistakes
A ((−4, −1)): reversed the ratio
C ((−27,−2)): found the midpoint
D ((23,−12)): used 23 of the segment instead of 53
Circles in the coordinate plane
Method. Center = midpoint of the diameter; r2 = (half the diameter)².
Worked example
The endpoints of a diameter of a circle are (4, 7) and (−6, −3). Which is an equation of the circle?
A(x+1)2 + (y−2)2 = 200
B(x−1)2 + (y+2)2 = 50
C(x+1)2 + (y−2)2 = 52
D(x+1)2 + (y−2)2 = 50
AnswerD — (x+1)2 + (y−2)2 = 50
Step-by-step
The center is the midpoint: (−1, 2).
The radius squared is the squared distance from the center to an endpoint: (−5)2 + (−5)2 = 50.
A (x-intercept (−12, 0), y-intercept (0, 6)): swapped the two intercepts
C (x-intercept (−6, 0), y-intercept (0, 12)): made a sign error on both intercepts
D (x-intercept (−4, 0), y-intercept (0, 2)): used the coefficients as the intercepts
Distance between two points
Method. Draw the right triangle: legs |Δx| and |Δy|, distance is the hypotenuse.
Worked example
What is the distance between (1, −8) and (−7, −10)?
A10
B68
C215
D217
AnswerD — 217
Step-by-step
d = (x2−x1)2+(y2−y1)2.
d = (−8)2+(−2)2 = 68.
So d = 217.
Quick check(217)2 = 68 = 64 + 4.
Common mistakes
A (10): added the horizontal and vertical distances
B (68): forgot the square root
C (215): subtracted the squares
Midpoint
Method. Midpoint = average of the x's and average of the y's; to find an endpoint, go the same step again past the midpoint.
Worked example
The midpoint of segment AB is (2, −1), and A = (12, 9). What are the coordinates of B?
A(7, 4)
B(−8, −11)
C(−10, −10)
D(8, 11)
AnswerB — (−8, −11)
Step-by-step
B = 2M − A.
B = (2(2) − 12, 2(−1) − 9).
So B = (−8, −11).
Quick checkthe average of (12, 9) and (−8, −11) is (2, −1).
Common mistakes
A ((7, 4)): averaged A and the midpoint
C ((−10, −10)): subtracted A from the midpoint once
D ((8, 11)): subtracted in the wrong order
Perpendicular lines
Method. Flip the slope and change its sign; then find b from the point.
Worked example
Which line passes through (6, −7) and is perpendicular to y = (21)x + 5?
Ay = −(21)x − 4
By = −2x + 5
Cy = 2x − 19
Dy = (21)x − 10
AnswerB — y = −2x + 5
Step-by-step
Perpendicular slopes are opposite reciprocals: −211 = −2.
b = −7 − (−2)(6) = 5.
Equation: y = −2x + 5.
Quick check(21) × (−2) = −1 ✓ and the point gives (−2)(6) + 5 = −7 ✓.
Common mistakes
A (y = −(21)x − 4): used only the opposite sign (not the reciprocal)
C (y = 2x − 19): used only the reciprocal (not the opposite sign)
D (y = (21)x − 10): used the same slope (parallel, not perpendicular)
02.03 Area and Volume
This topic covers perimeter, area, surface area and volume of plane figures and solids, including scaling. The CLT prints a short formula list (circle, rectangle, triangle and sphere formulas), so memorize the others, such as the cylinder, cone and pyramid volumes; leave answers in terms of π when the choices do.
Area and Perimeter
Area measures square units inside a figure; perimeter adds the side lengths. Split composite figures into simple shapes.
Key formulas
Rectangle
A=lw,P=2l+2w
Triangle
A=21bh
Parallelogram
A=bh
Trapezoid
A=21(b1+b2)h
Shaded region
Ashaded=Awhole−Aremoved
Area of parallelograms and trapezoids
Method. Parallelogram: A = base × height; P uses the slanted sides.
Worked example
What is the area of the parallelogram shown?
A55
B70
C110
D286
AnswerC — 110
Step-by-step
Area of a parallelogram = base × height.
The height 5 is perpendicular to the base 22.
So A = 22 × 5 = 110.
Quick check110 ÷ 22 = 5, the height ✓.
Common mistakes
A (55): multiplied by ½ as for a triangle
B (70): found the perimeter
D (286): used the slanted side as the height
Composite figures
Method. Split the figure into rectangles or subtract the missing corner.
Worked example
The figure shown is made of rectangles, and all corners are right angles. What is its perimeter, in units?
A20
B26
C32
D34
AnswerB — 26
Step-by-step
The two unlabeled sides are 7 − 3 = 4 and 6 − 4 = 2.
So P = 7 + 6 + 3 + 4 + 4 + 2 = 26.
Quick checkthe perimeter equals that of the 7 × 6 rectangle, 2 × (7 + 6) = 26 ✓.
Common mistakes
A (20): added only the labeled sides
C (32): added the corner's sides twice
D (34): found the area
Area and perimeter with algebra
Method. Write the formula with the unknown, then solve.
Worked example
A triangle has base 6x and height x. Its area is 75. What is the value of x?
A5
B52
C25
D30
AnswerA — 5
Step-by-step
Area = ½ × base × height = ½ × 6x × x = 3x2.
So 3x2 = 75, x2 = 25 and x = 5.
Quick check½ × 30 × 5 = 75 ✓.
Common mistakes
B (52): multiplied by ½ twice
C (25): forgot to take the square root
D (30): gave the base
Scaling and area
Method. Area scales by k2; length ratio is the square root of the area ratio.
Worked example
Two similar figures have areas in the ratio 4 : 1. What is the ratio of their corresponding lengths?
A2
B2
C4
D8
AnswerB — 2
Step-by-step
The area ratio is the square of the length ratio.
So the length ratio is 4 = 2, that is 2 : 1.
Quick check22 = 4, the area ratio ✓.
Common mistakes
A (2): took the square root twice
C (4): gave the area ratio
D (8): cubed the length ratio
Area in the coordinate plane
Method. Use a horizontal or vertical side as the base, or box the figure and subtract.
Worked example
What is the area of the triangle with vertices (5, −7), (−2, 0), (−6, 0)?
A211
B14
C22
D28
AnswerB — 14
Step-by-step
Two vertices have y = 0.
So that side is horizontal with length −2 − (−6) = 4.
The height is the vertical distance from the third vertex: |−7 − 0| = 7.
So A = ½ × 4 × 7 = 14.
Quick checkthe shoelace formula gives ½ × |28| = 14 ✓.
Common mistakes
A (211): added the base and height
C (22): used a horizontal distance as the height
D (28): forgot to multiply by ½
Shaded regions
Method. Shaded area = outer area − inner area.
Worked example
A circle is inscribed in a square with side length 8. What is the area of the region inside the square but outside the circle?
A64 − 64π
B64 − 8π
C16π
D64 − 16π
AnswerD — 64 − 16π
Step-by-step
The circle's diameter equals the side.
So r = 8 ÷ 2 = 4.
Square area = 82 = 64.
Circle area = π × 42 = 16π.
Shaded area = 64 − 16π.
Quick check64 − 16 × 3.14 = 13.76, which is positive and less than 64 ✓.
Common mistakes
A (64 − 64π): used the side as the radius
B (64 − 8π): subtracted the circumference
C (16π): gave the area of the circle
Volume and Surface Area
Volume measures cubic units; prisms and cylinders use base area × height, pyramids and cones take one third of that.
Key formulas
Prism / cylinder
V=Bh,Vcyl=πr2h
Pyramid / cone
V=31Bh,Vcone=31πr2h
Sphere
V=34πr3,SA=4πr2
Rectangular box
V=lwh,SA=2(lw+lh+wh)
Cylinder surface
SA=2πr2+2πrh
Scaling
lengths×k⇒surface area×k2,volume×k3
Surface area of prisms
Method. SA = 2(lw + lh + wh): add the three different faces, then double.
Worked example
What is the surface area of the rectangular prism shown?
A84
B136
C252
D272
AnswerB — 136
Step-by-step
A rectangular prism has three pairs of equal faces.
The faces have areas 2 × 7 = 14, 2 × 6 = 12 and 7 × 6 = 42.
So SA = 2 × (14 + 12 + 42) = 2 × 68 = 136.
Quick checkthe six faces are 14, 14, 12, 12, 42 and 42, which add to 136 ✓.
Common mistakes
A (84): found the volume
C (252): used the largest face for all six faces
D (272): counted each face twice
Volume of cylinders
Method. Cylinder: V = πr²h; SA = 2πr² + 2πrh.
Worked example
What is the volume of the cylinder shown? Give your answer in terms of π.
A15π
B25π
C30π
D75π
AnswerD — 75π
Step-by-step
V = πr²h.
V = π × 52 × 3.
So V = 75π.
Quick check75π ÷ π = 75, matching the formula ✓.
Common mistakes
A (15π): forgot to square the radius
B (25π): used the cone formula
C (30π): found the lateral area 2πrh
Volume of triangular prisms
Method. Prism: V = base area × length; use the legs for a right triangle.
Worked example
A prism has a right-triangle base with legs 3 and 4 and hypotenuse 5. The prism is 15 units long. What is its volume, in cubic units?
A6
B21
C30
D90
AnswerD — 90
Step-by-step
V = (area of base) × length.
The base area is ½ × 3 × 4 = 6.
So V = 6 × 15 = 90 cubic units.
Quick check90 ÷ 15 = 6 = ½ × 3 × 4 ✓.
Common mistakes
A (6): gave only the area of the triangular base
B (21): added the length instead of multiplying
C (30): used ⅓ as for a pyramid
Surface area of cylinders
Method. Cylinder: V = πr²h; SA = 2πr² + 2πrh.
Worked example
What is the total surface area of the cylinder shown? Give your answer in terms of π.
A48π
B66π
C72π
D168π
AnswerB — 66π
Step-by-step
SA = 2πr² + 2πrh.
SA = 2π × 32 + 2π × 3 × 8 = 18π + 48π.
So SA = 66π.
Quick check66π ÷ π = 66, matching the formula ✓.
Common mistakes
A (48π): found only the lateral area
C (72π): found the volume
D (168π): used the diameter as the radius
Cones and pyramids
Method. Pyramid: V = ⅓ × base area × height.
Worked example
A pyramid has a square base with sides of 6 inches and a height of 16 inches. What is its volume, in cubic inches?
A32
B36
C128
D192
AnswerD — 192
Step-by-step
V = ⅓ × (base area) × height.
The base area is 62 = 36.
So V = ⅓ × 36 × 16 = 192 cubic inches.
Quick check3 × 192 = 576 = 36 × 16 ✓.
Common mistakes
A (32): did not square the base edge
B (36): found only the area of the base
C (128): used the perimeter of the base instead of its area
Spheres
Method. Sphere: V = (34)πr³ and SA = 4πr².
Worked example
A sphere has a radius of 3. What is its volume? Give your answer in terms of π.
A36π
B108π
C216π
D288π
AnswerA — 36π
Step-by-step
V = (34)πr³.
V = (34) × π × 33 = (34) × 27π.
So V = 36π.
Quick check36π × 43 = 27π = π × 33 ✓.
Common mistakes
B (108π): forgot the ⅓
C (216π): cubed the diameter and dropped the 34
D (288π): used the diameter as the radius
Scaling and volume
Method. Volume scales by k3; area by k2.
Worked example
A solid has a volume of 23 cubic units. Every length is multiplied by 2. What is the volume of the new solid?
A46
B92
C138
D184
AnswerD — 184
Step-by-step
When lengths are multiplied by k, volume is multiplied by k3.
So the new volume is 23 × (2)3 = 23 × 8 = 184.
Quick check184 ÷ 23 = 8 = (2)3 ✓.
Common mistakes
A (46): multiplied the volume by the scale factor
B (92): squared the scale factor
C (138): multiplied by 3 times the scale factor
Solving for a dimension
Method. Substitute into the volume formula and solve for the unknown.
Worked example
A cylinder has a volume of 45π cubic units and a height of 5 units. What is its radius, in units?
A3
B29
C6
D9
AnswerA — 3
Step-by-step
V = πr²h.
So 45π = π × r2 × 5.
Divide by 5π: r2 = 9.
So r = 3.
Quick checkπ × 32 × 5 = 45π ✓.
Common mistakes
B (29): divided by 2h instead of taking a square root
C (6): gave the diameter
D (9): forgot to take the square root
Composite solids
Method. Find each part's volume and add.
Worked example
A solid is a cylinder with radius 2 and height 12, with a cone of the same radius and height 3 on top. What is its volume? Give your answer in terms of π.
A44π
B48π
C52π
D60π
AnswerC — 52π
Step-by-step
Cylinder: πr²h = π × 22 × 12 = 48π.
Cone: ⅓πr²h = ⅓ × π × 22 × 3 = 4π.
Total = 48π + 4π = 52π.
Quick check52π is more than the cylinder alone, 48π ✓.