The GED Mathematical Reasoning test lasts 115 minutes: about 45% quantitative problem solving (number sense, ratios, percents, measurement, geometry, data) and about 55% algebraic problem solving. A formula sheet is provided. Part 1 allows no calculator; part 2 has an on-screen calculator (or your own TI-30XS at a test center). Questions are multiple choice and fill in the blank, and a wrong answer does not count against you, so answer every question.
01.01 Quantitative Problem Solving
The GED Mathematical Reasoning test lasts 115 minutes and uses multiple-choice questions with four answer choices (A–D) and fill-in-the-blank questions where you type a number. The first part allows no calculator; the rest of the test has an on-screen calculator, a formula sheet is provided, and a wrong answer does not count against you, so answer every question. About 45% of the test is quantitative problem solving. This topic covers number sense (fractions, decimals, exponents, scientific notation, absolute value), ratios, rates, proportions and percents, perimeter, area, circles and the Pythagorean theorem, volume and surface area, and data, statistics and probability, all in everyday settings such as work, money, home, health and travel.
GED questions use fractions, decimals, negative numbers and very large or very small numbers in everyday settings. To divide by a fraction, multiply by its reciprocal; to work with powers of ten, add exponents when multiplying and subtract them when dividing. Absolute value is distance from zero, so the distance between two numbers is the absolute value of their difference.
Key formulas
Dividing fractions
ba÷dc=ba×cd
Exponent rules
am×an=am+n,anam=am−n,a0=1
Negative exponent
a−n=an1
Scientific notation
N=c×10k,1≤c<10
Distance between two numbers
distance=∣a−b∣
Order of operations
parentheses→exponents→×,÷→+,−
Dividing fractions
Method. To find how many portions fit, divide; to divide by a fraction, multiply by its reciprocal.
Worked example. A recipe for a salad dressing uses 3/4 cup of olive oil per batch. Maya has 4 1/2 cups of olive oil. How many full batches can she make?
(A) 6
(B) 3 3/8
(C) 5 1/4
(D) 3 3/4
AnswerA — 6
Step-by-step
Write 4 1/2 cups as the improper fraction 9/2.
Dividing by 3/4 means multiplying by 4/3: 9/2 × 4/3 = 36/6 = 6.
She can make 6 batches.
Fast methodAsk how many 3/4 cups fit in 4 1/2 cups: in decimals, 4.5 ÷ 0.75 = 6.
Quick checkCheck: 6 × 3/4 = 18/4 = 4.5 cups ✓.
Why the other choices are wrong
B (3 3/8): multiplied instead of dividing: 9/2 × 3/4 = 27/8, which is 3 3/8
C (5 1/4): added the two amounts: 4.5 + 0.75 = 5.25, which is 5 1/4
D (3 3/4): subtracted one batch from the oil: 4.5 − 0.75 = 3.75, which is 3 3/4
Scientific notation
Method. Split the problem into the number parts and the powers of ten, and use the exponent rule for each operation.
Worked example. A city’s yearly budget is 6.3 × 108 dollars, and the city has 2.1 × 105 residents. How many dollars of the budget is that per resident?
(A) 3 × 1013
(B) 4.2 × 103
(C) 3 × 103
(D) 3 × 10−3
AnswerC — 3 × 103
Step-by-step
Divide the number parts: 6.3 ÷ 2.1 = 3.
Divide the powers of ten by subtracting the exponents: 8 − 5 = 3, giving 103.
The budget is 3 × 103 dollars, or $3,000, per resident.
Fast methodDivide the front numbers and subtract the exponents.
Quick checkCheck: 3 × 2.1 = 6.3 and 3 + 5 = 8, so 3 × 103 times 2.1 × 105 gives back 6.3 × 108 ✓.
Why the other choices are wrong
A (3 × 1013): added the exponents as if multiplying: 8 + 5 = 13
B (4.2 × 103): subtracted the number parts instead of dividing them: 6.3 − 2.1 = 4.2
D (3 × 10−3): subtracted the exponents in the wrong order: 5 − 8 = −3
Absolute value as distance
Method. Distance on a number line is |a − b|, which is never negative.
Worked example. A diver is 35 feet below sea level, which is written −35 feet. A seagull flies 12 feet above sea level, directly above the diver. How far apart are the seagull and the diver?
(A) 23 feet
(B) 47 feet
(C) −23 feet
(D) −47 feet
AnswerB — 47 feet
Step-by-step
The distance between two heights is the absolute value of their difference.
12 − (−35) = 12 + 35 = 47.
|47| = 47, so they are 47 feet apart.
Fast methodOne is 35 feet below zero and the other 12 feet above, so add: 35 + 12 = 47.
Quick checkCheck: from −35 up to 0 is 35 feet, and from 0 up to 12 is 12 more; 35 + 12 = 47 ✓.
Why the other choices are wrong
A (23 feet): ignored the sign of −35 and found 35 − 12 = 23
C (−23 feet): added the two heights: 12 + (−35) = −23
D (−47 feet): subtracted the seagull’s height from the diver’s and kept the sign: −35 − 12 = −47
Ratios, Rates, Proportions and Percents
A rate compares two different units, and a unit rate puts one unit on the bottom, such as dollars per ounce or miles per gallon. A proportion sets two equal ratios in the same order and is solved by cross-multiplying. A percent is a number out of 100: change it to a decimal before multiplying, divide a change by the original amount for percent change, and use I = Prt for simple interest with the rate as a decimal and the time in years.
Key formulas
Unit rate
unit rate=number of unitsamount
Proportion
ba=dc⇒ad=bc
Percent of a number
part=100p×whole
Percent change
percent change=originalnew−original×100
Simple interest (on the formula sheet)
I=Prt
Total cost (on the formula sheet)
total cost=number of units×price per unit
Unit price
Method. Divide price by amount for each choice, then compare the unit prices.
Worked example. A 12-ounce box of cereal costs $4.20 and an 18-ounce box of the same cereal costs $5.94. What is the lower of the two prices per ounce?
(A) $0.35
(B) $1.74
(C) $3.03
(D) $0.33
AnswerD — $0.33
Step-by-step
Small box: 4.20 ÷ 12 = 0.35 dollars per ounce.
Large box: 5.94 ÷ 18 = 0.33 dollars per ounce.
The lower price per ounce is $0.33, for the large box.
Fast methodUnit price is always price ÷ quantity; compare the two quotients.
A ($0.35): found the price per ounce of the smaller box only, because its total price is lower
B ($1.74): subtracted the two prices: 5.94 − 4.20 = 1.74
C ($3.03): divided ounces by dollars for the large box: 18 ÷ 5.94 ≈ 3.03 ounces per dollar
Percent increase
Method. Find the change, divide by the starting value, then multiply by 100.
Worked example. A warehouse worker’s pay rises from $16.00 an hour to $18.40 an hour. By what percent did the hourly pay increase?
(A) 15%
(B) 2.4%
(C) about 13%
(D) 115%
AnswerA — 15%
Step-by-step
The increase is 18.40 − 16.00 = 2.40 dollars.
Divide by the original pay: 2.40 ÷ 16 = 0.15.
As a percent, 0.15 is 15%.
Fast methodPercent change = change ÷ original; the original is the old pay.
Quick checkCheck: 15% of 16 is 0.15 × 16 = 2.4, and 16 + 2.4 = 18.4 ✓.
Why the other choices are wrong
B (2.4%): gave the dollar increase, 2.40, as the percent
C (about 13%): divided the increase by the new pay: 2.40 ÷ 18.40 ≈ 0.13
D (115%): divided the new pay by the old pay: 18.40 ÷ 16 = 1.15
Tax and tip
Method. Read carefully which amount each percent is taken of, then add the parts to the original.
Worked example. A dinner bill is $64.00 before tax. A sales tax of 8% is added, and the diners also leave a tip of 20% of the bill before tax. What is the total amount they pay?
(A) $82.94
(B) $17.92
(C) $81.92
(D) $76.80
AnswerC — $81.92
Step-by-step
Tax: 0.08 × 64 = 5.12 dollars.
Tip on the pre-tax bill: 0.2 × 64 = 12.8 dollars.
Total: 64 + 5.12 + 12.8 = 81.92, so they pay $81.92.
Fast methodBoth percents are taken of the same $64, so add them first: 8% + 20% = 28%, and 64 × 1.28 = 81.92.
A ($82.94): took the tip on the bill after tax: 69.12 × 0.2 = 13.824, and 69.12 + 13.824 ≈ 82.94
B ($17.92): gave only the tax plus the tip: 5.12 + 12.80 = 17.92
D ($76.80): left out the tax: 64 + 12.80 = 76.80
Perimeter, Area, Circles and the Pythagorean Theorem
Perimeter is the distance around a shape and is measured in units such as feet; area is the space inside and is measured in square units. For a circle, the distance around is the circumference and depends on the radius, which is half the diameter. In a right triangle, the longest side c satisfies a2 + b2 = c2. On a scale drawing, every length is multiplied by the same scale factor.
Key formulas
Rectangle
A=lw,P=2l+2w
Triangle
A=21bh
Circle
C=2πr=πd,A=πr2
Pythagorean theorem
a2+b2=c2
Scale drawing
actual length=drawing length×scale factor
Area with a part removed
Method. Find the area of the whole shape, then subtract the area of the part that is cut out.
Worked example. A wall is 12 feet wide and 8 feet tall. It has a window 3 feet wide and 4 feet tall that will not be painted. How many square feet of wall will be painted?
(A) 108 square feet
(B) 84 square feet
(C) 96 square feet
(D) 40 square feet
AnswerB — 84 square feet
Step-by-step
Area of the wall: 12 × 8 = 96 square feet.
Area of the window: 3 × 4 = 12 square feet.
Painted area: 96 − 12 = 84 square feet.
Fast methodWhole area minus the hole.
Quick checkCheck: 84 + 12 = 96 = 12 × 8 ✓.
Why the other choices are wrong
A (108 square feet): added the window area instead of subtracting it: 96 + 12 = 108
C (96 square feet): found the whole wall and forgot to take out the window
D (40 square feet): found the perimeter of the wall: 2 × 12 + 2 × 8 = 40
Circumference
Method. Distance around a circle is circumference (2πr or πd); space inside is area (πr2).
Worked example. A round tabletop has a radius of 2.5 feet. A strip of edging will go all the way around its edge. How many feet of edging are needed? Use π ≈ 3.14.
(A) 7.85 feet
(B) 19.625 feet
(C) 31.4 feet
(D) 15.7 feet
AnswerD — 15.7 feet
Step-by-step
The edge of a circle is its circumference: C = 2πr.
C ≈ 2 × 3.14 × 2.5 = 15.7 feet.
Fast methodThe diameter is 5 feet, and C = πd ≈ 3.14 × 5 = 15.7.
Quick checkCheck: 15.7 ÷ 3.14 = 5, the diameter ✓.
Why the other choices are wrong
A (7.85 feet): multiplied π by the radius only: 3.14 × 2.5 = 7.85
B (19.625 feet): found the area instead: 3.14 × 6.25 = 19.625
C (31.4 feet): put the diameter into 2πr: 2 × 3.14 × 5 = 31.4
Pythagorean theorem
Method. The diagonal of a rectangle is the hypotenuse: c2 = a2 + b2, then take the square root.
Worked example. A television screen is 48 inches wide and 27 inches tall. Screens are sold by the length of the diagonal. What is the diagonal of this screen, to the nearest inch?
(A) 55 inches
(B) 75 inches
(C) 40 inches
(D) 3033 inches
AnswerA — 55 inches
Step-by-step
The diagonal is the hypotenuse of a right triangle with legs 48 and 27.
Square and add: 482 + 272 = 2304 + 729 = 3033.
Take the square root: √3033 ≈ 55.07, which is 55 inches to the nearest inch.
Fast methodThe diagonal must be longer than 48 but shorter than 48 + 27 = 75, which rules out two choices at once.
Quick checkCheck: 55 × 55 = 3025, very close to 3033 ✓.
Why the other choices are wrong
B (75 inches): added the two sides: 48 + 27 = 75
C (40 inches): subtracted the squares: 2304 − 729 = 1575, and √1575 ≈ 40
D (3033 inches): added the squares but forgot to take the square root
Volume and Surface Area
Volume measures how much a solid holds, in cubic units; surface area is the total area of its outside, in square units. Prisms and cylinders have volume equal to base area times height, while pyramids and cones hold one third of that. Every formula uses the radius, so halve a diameter first. All of these formulas are on the GED formula sheet; the skill is choosing the right one.
Key formulas
Rectangular prism
V=lwh,SA=2lw+2lh+2wh
Any prism or cylinder
V=Bh
Cylinder
V=πr2h,SA=2πrh+2πr2
Pyramid and cone
V=31Bh,Vcone=31πr2h
Sphere
V=34πr3,SA=4πr2
Volume of a rectangular prism
Method. Volume = base area × height; surface area adds the areas of the faces.
Worked example. A rectangular planter box is 4 feet long, 2 feet wide and 1.5 feet deep. How many cubic feet of soil does it take to fill it?
(A) 7.5 cubic feet
(B) 8 cubic feet
(C) 12 cubic feet
(D) 34 cubic feet
AnswerC — 12 cubic feet
Step-by-step
Volume of a box = length × width × height.
V = 4 × 2 × 1.5 = 12 cubic feet.
Fast methodBase area 4 × 2 = 8 square feet, then times the depth: 8 × 1.5 = 12.
Quick checkCheck: 12 ÷ 1.5 = 8 = 4 × 2 ✓.
Why the other choices are wrong
A (7.5 cubic feet): added the three dimensions: 4 + 2 + 1.5 = 7.5
B (8 cubic feet): multiplied the length and width but left out the depth: 4 × 2 = 8
D (34 cubic feet): found the surface area: 2 × 8 + 2 × 6 + 2 × 3 = 34
Volume of a cylinder
Method. A cylinder is a prism with a circular base: V = πr2h.
Worked example. A cylindrical water tank has a diameter of 4 feet and a height of 5 feet. What is its volume? Use π ≈ 3.14.
(A) 251.2 cubic feet
(B) 62.8 cubic feet
(C) 31.4 cubic feet
(D) about 20.9 cubic feet
AnswerB — 62.8 cubic feet
Step-by-step
The radius is half the diameter: 4 ÷ 2 = 2 feet.
V = πr2h ≈ 3.14 × 4 × 5 = 62.8 cubic feet.
Fast methodHalve the diameter first, then base area × height.
Quick checkCheck: the base area is 3.14 × 4 = 12.56, and 12.56 × 5 = 62.8 ✓.
Why the other choices are wrong
A (251.2 cubic feet): used the diameter as the radius: 3.14 × 16 × 5 = 251.2
C (31.4 cubic feet): did not square the radius: 3.14 × 2 × 5 = 31.4
D (about 20.9 cubic feet): divided by 3 as for a cone: 62.8 ÷ 3 ≈ 20.9
Volume of a cone
Method. Cones and pyramids use one third of base area × height; spheres use 4/3 πr3.
Worked example. A paper drinking cup is shaped like a cone with a radius of 1.5 inches and a height of 4 inches. What is its volume? Use π ≈ 3.14.
(A) 28.26 cubic inches
(B) 6.28 cubic inches
(C) 37.68 cubic inches
(D) 9.42 cubic inches
AnswerD — 9.42 cubic inches
Step-by-step
Square the radius: 1.5 × 1.5 = 2.25.
Cylinder with the same base and height: 3.14 × 2.25 × 4 = 28.26.
A cone holds one third of that: 28.26 ÷ 3 = 9.42 cubic inches.
Fast methodA cone is one third of the cylinder that fits around it.
A (28.26 cubic inches): forgot the 1/3 in the cone formula: 3.14 × 2.25 × 4 = 28.26
B (6.28 cubic inches): did not square the radius: 3.14 × 1.5 × 4 ÷ 3 = 6.28
C (37.68 cubic inches): used the diameter, 3, as the radius: 3.14 × 9 × 4 ÷ 3 = 37.68
Data, Statistics and Probability
GED data questions describe a table or chart in words and ask for a statistic. The mean is the sum divided by the count, the median is the middle of the sorted list, the mode is the most frequent value and the range is largest minus smallest. A weighted average multiplies each value by its weight. A probability is favorable outcomes over all equally likely outcomes, and for two events in a row you multiply, lowering the counts when nothing is put back.
Key formulas
Mean
xˉ=number of valuessum of values
Weighted average
weighted mean=w1+w2+⋯w1x1+w2x2+⋯
Range
range=largest−smallest
Probability
P(E)=total outcomesfavorable outcomes
Two events in a row
P(A and B)=P(A)×P(B after A)
Complement
P(not E)=1−P(E)
Median of an even-sized list
Method. Median = middle of the sorted list; mean = sum ÷ count; range = largest − smallest.
Worked example. A family’s grocery bills for six weeks were $82, $95, $71, $104, $88 and $90. What is the median weekly bill?
(A) $89.00
(B) $88.33
(C) $33.00
(D) $87.50
AnswerA — $89.00
Step-by-step
Sort the bills: 71, 82, 88, 90, 95, 104.
With six values, the median is the mean of the third and fourth: (88 + 90) ÷ 2 = 89.
The median bill is $89.00.
Fast methodSort first; for an even count, average the two middle values.
Quick checkCheck: three bills (71, 82, 88) are below 89 and three (90, 95, 104) are above ✓.
Why the other choices are wrong
B ($88.33): found the mean: 530 ÷ 6 ≈ 88.33
C ($33.00): found the range: 104 − 71 = 33
D ($87.50): averaged the two middle numbers of the list without sorting it: (71 + 104) ÷ 2 = 87.5
Weighted average
Method. Weighted average = sum of (weight × value) when the weights add to 100%.
Worked example. In a job-training course, tests count for 60% of the grade, homework for 25% and the final project for 15%. Ana scores 80 on tests, 92 on homework and 70 on the project. What is her course grade?
(A) 80.67
(B) 86
(C) 81.5
(D) 77
AnswerC — 81.5
Step-by-step
Tests: 0.6 × 80 = 48.
Homework: 0.25 × 92 = 23.
Project: 0.15 × 70 = 10.5.
Grade: 48 + 23 + 10.5 = 81.5.
Fast methodMultiply each score by its weight as a decimal and add; the weights already add to 1.
Quick checkCheck: the grade lies between the lowest score, 70, and the highest, 92, and closest to the heavily weighted 80 ✓.
Why the other choices are wrong
A (80.67): took the plain mean of the three scores: 242 ÷ 3 ≈ 80.67
B (86): left out the project and averaged the other two: (80 + 92) ÷ 2 = 86
D (77): matched the 60% weight to the project and the 15% weight to the tests: 42 + 23 + 12 = 77
Probability without replacement
Method. For events in a row, multiply; without replacement, the second fraction uses the reduced counts.
Worked example. A box of 10 batteries contains 3 dead ones. Two batteries are taken out at random, one after the other, without putting the first back. What is the probability that both are dead?
(A) 9/100
(B) 1/15
(C) 3/5
(D) 2/9
AnswerB — 1/15
Step-by-step
First battery dead: 3/10.
Then 2 dead batteries are left among 9, so the second is dead with probability 2/9.
Multiply: 3/10 × 2/9 = 6/90 = 1/15.
Fast methodFor “first and then second”, multiply, and lower both counts after the first pick.
Quick checkCheck: there are 10 × 9 = 90 ordered pairs and 3 × 2 = 6 of them are both dead; 6/90 = 1/15 ✓.
Why the other choices are wrong
A (9/100): put the first battery back in the count: 3/10 × 3/10 = 9/100
C (3/5): added the probabilities instead of multiplying: 3/10 + 3/10 = 6/10
D (2/9): gave only the probability for the second battery
01.02 Algebraic Problem Solving
The GED Mathematical Reasoning test lasts 115 minutes, and about 55% of it is algebraic problem solving. A formula sheet is provided. The first five questions allow no calculator; after that an on-screen calculator is available. Questions are multiple choice with four choices (A–D) or fill in the blank, where you type a number, and a wrong answer does not count against you, so answer every question. This topic covers expressions and polynomials, linear equations and inequalities, systems of two linear equations, quadratic equations, and functions, including slope, intercepts and graphs described in words.
An expression is a recipe with no equals sign: you simplify it, evaluate it, expand it or factor it, but you do not solve it. Distribute first, then combine like terms (the same letter raised to the same power). To multiply two binomials, multiply each term of the first by each term of the second; to factor, look first for a common factor and then for two numbers whose product is the constant and whose sum is the middle coefficient.
Key formulas
Distributive property
a(b+c)=ab+ac
Subtracting a bracket changes every sign inside it
−(b−c)=−b+c
Multiplying two binomials
(a+b)(c+d)=ac+ad+bc+bd
Square of a binomial
(a−b)2=a2−2ab+b2
Difference of two squares
a2−b2=(a+b)(a−b)
Product rule for exponents
xm⋅xn=xm+n
Simplifying with the distributive property
Method. Distribute, then combine like terms.
Worked example. Simplify 3(2x − 5) − 4x.
(A) 2x − 15
(B) 2x − 5
(C) 10x − 15
(D) 6x − 19
AnswerA — 2x − 15
Step-by-step
Distribute the 3: 3(2x − 5) = 6x − 15.
Subtract 4x: 6x − 15 − 4x.
Combine the x terms: 6x − 4x = 2x, so the result is 2x − 15.
Fast methodMultiply the bracket out, then collect the x terms; the number −15 has no like term.
Quick checkCheck with x = 1: 3(2 − 5) − 4 = −13, and 2(1) − 15 = −13 ✓.
Why the other choices are wrong
B (2x − 5): multiplied only the first term by 3: 6x − 5 − 4x = 2x − 5
C (10x − 15): added the 4x instead of subtracting it: 6x + 4x − 15
D (6x − 19): treated 4x as the number 4: 6x − 15 − 4 = 6x − 19
Multiplying two binomials
Method. Multiply every term by every term, then combine the two middle terms.
Worked example. Which expression is equal to (x + 4)(x − 7)?
(A) x2 − 28
(B) x2 + 3x − 28
(C) x2 − 3x − 28
(D) x2 − 3x + 28
AnswerC — x2 − 3x − 28
Step-by-step
Multiply each term of the first bracket by each term of the second: x · x = x2, x · (−7) = −7x, 4 · x = 4x, 4 × (−7) = −28.
Combine the middle terms: −7x + 4x = −3x.
The product is x2 − 3x − 28.
Fast methodThe middle coefficient is the sum 4 + (−7) = −3 and the constant is the product 4 × (−7) = −28.
Quick checkCheck with x = 1: (5)(−6) = −30, and 1 − 3 − 28 = −30 ✓.
Why the other choices are wrong
A (x2 − 28): multiplied only the first terms and the last terms and skipped the middle
B (x2 + 3x − 28): combined the middle terms with the wrong sign: 7x − 4x
D (x2 − 3x + 28): took 4 × (−7) as +28
Factoring a trinomial
Method. Find two numbers that multiply to the constant and add to the middle coefficient.
Worked example. Which is the factored form of x2 − 2x − 24?
(A) (x + 6)(x − 4)
(B) (x − 8)(x + 3)
(C) (x − 12)(x + 2)
(D) (x − 6)(x + 4)
AnswerD — (x − 6)(x + 4)
Step-by-step
Look for two numbers whose product is −24 and whose sum is −2.
The pair −6 and 4 works: −6 × 4 = −24 and −6 + 4 = −2.
So x2 − 2x − 24 = (x − 6)(x + 4).
Fast methodList factor pairs of 24 and pick the pair that differs by 2, giving the larger one the minus sign.
A ((x + 6)(x − 4)): swapped the signs, which gives a middle term of +2x
B ((x − 8)(x + 3)): found two numbers with product −24 but did not check the sum: −8 + 3 = −5
C ((x − 12)(x + 2)): found two numbers with product −24 but did not check the sum: −12 + 2 = −10
Linear Equations and Inequalities
To solve a linear equation, do the same thing to both sides until the variable stands alone: clear brackets, collect the variable on one side, then undo addition and multiplication in reverse order. An inequality is solved the same way, except that multiplying or dividing both sides by a negative number flips the inequality sign. In word problems, a fixed charge plus a rate times a quantity gives a total, and words such as at least and at most signal an inequality.
Key formulas
Two-step equation
ax+b=c⇒x=ac−b
Fixed charge plus a rate
total=fixed+rate×n
Dividing by a negative flips the sign
−5x>10⇒x<−2
Inequality words
at least→≥,at most→≤
Distance, rate and time
d=rt
Two-step equation
Method. Undo the operations in reverse order.
Worked example. Solve 5x − 8 = 27.
(A) 3.8
(B) 7
(C) 35
(D) 5.4
AnswerB — 7
Step-by-step
Add 8 to both sides: 5x = 35.
Divide both sides by 5: x = 35 ÷ 5 = 7.
Fast methodUndo the subtraction first, then the multiplication.
Quick checkCheck: 5 × 7 = 35 and 35 − 8 = 27 ✓.
Why the other choices are wrong
A (3.8): subtracted 8 instead of adding it: 19 ÷ 5 = 3.8
C (35): added 8 but forgot to divide by 5
D (5.4): ignored the 8 and divided 27 by 5
Linear equation in context
Method. Write fixed fee + rate × hours = total and solve for hours.
Worked example. A plumber charges a $90 service call fee plus $45 per hour of work. One bill came to $360. How many hours did the plumber work?
(A) 8
(B) 10
(C) 7
(D) 6
AnswerD — 6
Step-by-step
Write the equation: 90 + 45h = 360.
Subtract the fee: 360 − 90 = 270, so 45h = 270.
Divide by the hourly rate: 270 ÷ 45 = 6 hours.
Fast methodTake off the one-time fee, then divide what is left by the hourly rate.
B (10): added the fee instead of subtracting it: 450 ÷ 45 = 10
C (7): counted the service fee as one more hour: 6 + 1
Inequality with a negative coefficient
Method. Solve like an equation; flip the sign when dividing by a negative.
Worked example. Which inequality is the solution of 7 − 3x ≤ 19?
(A) x ≥ −4
(B) x ≤ −4
(C) x ≥ 4
(D) x ≥ −26/3
AnswerA — x ≥ −4
Step-by-step
Subtract 7 from both sides: −3x ≤ 12.
Divide both sides by −3 and flip the sign: x ≥ 12 ÷ (−3).
12 ÷ (−3) = −4, so x ≥ −4.
Fast methodTreat it like an equation, and flip the sign at the moment you divide by a negative.
Quick checkCheck with x = 0, which should work: 7 − 0 = 7 ≤ 19 ✓; and x = −5, which should fail: 7 + 15 = 22 > 19 ✓.
Why the other choices are wrong
B (x ≤ −4): divided by −3 but did not flip the sign
C (x ≥ 4): dropped the negative sign: 12 ÷ 3 = 4
D (x ≥ −26/3): added 7 instead of subtracting it: −3x ≤ 26
Systems of Two Linear Equations
A system is two equations that must both be true at once; on a graph, the solution is the point where the two lines cross. Use substitution when one equation already gives y (or x) on its own, and elimination when adding or subtracting the equations cancels a variable. Always find both values and check them in the equation you did not use. Two lines with the same slope and different intercepts are parallel, so that system has no solution.
Key formulas
Substitution
y=mx+b into Ax+By=C
Elimination: add the equations when a term cancels
(ax+by)+(cx−by)=(a+c)x
Solution as a point
(x,y) on both lines
Parallel lines: no solution
m1=m2,b1=b2
Solving a system by substitution
Method. Substitute the expression for y into the other equation.
Worked example. What is the solution of the system y = 2x + 1 and x + y = 13?
(A) (9, 4)
(B) (4, 8)
(C) (4, 9)
(D) (12, 25)
AnswerC — (4, 9)
Step-by-step
Substitute y = 2x + 1 into x + y = 13: x + 2x + 1 = 13.
Combine: 3x + 1 = 13, so 3x = 12 and x = 4.
Find y: y = 2 × 4 + 1 = 9. The solution is (4, 9).
Fast methodReplace y with 2x + 1 so that only x is left.
Quick checkCheck in the other equation: 4 + 9 = 13 ✓.
Why the other choices are wrong
A ((9, 4)): found the right numbers but swapped x and y
B ((4, 8)): dropped the +1 when finding y: 2 × 4 = 8
D ((12, 25)): stopped at 3x = 12 and used 12 as x
Solving a system by elimination
Method. Add the equations when one variable has opposite coefficients.
Worked example. Solve the system 3x + 2y = 17 and 5x − 2y = 7. What is the value of y?
(A) 3
(B) 4
(C) 8
(D) −4
AnswerB — 4
Step-by-step
Add the equations; the y terms cancel: 8x = 24, so x = 3.
Substitute into the first equation: 3 × 3 + 2y = 17, so 9 + 2y = 17.
Then 2y = 8 and y = 4.
Fast methodThe +2y and −2y cancel, so add the equations straight away.
Quick checkCheck in the second equation: 5 × 3 − 2 × 4 = 15 − 8 = 7 ✓.
Why the other choices are wrong
A (3): gave the value of x instead of y
C (8): stopped at 2y = 8
D (−4): substituted into 5x − 2y = 7 and slipped a sign: from −2y = −8 took y = −4
System in a word problem
Method. Write one equation for the count and one for the money, then substitute.
Worked example. A shop sold 40 T-shirts in one day. Plain shirts cost $7 and printed shirts cost $12. The shop took in $355 from T-shirts. How many printed shirts did it sell?
(A) 25
(B) 20
(C) 71
(D) 15
AnswerD — 15
Step-by-step
Let p be the printed shirts and q the plain shirts: p + q = 40 and 12p + 7q = 355.
B (20): assumed half of the 40 shirts were printed
C (71): subtracted the prices and divided the whole total: 355 ÷ 5 = 71
Quadratic Equations
A quadratic equation has an x2 term. First move everything to one side so the other side is 0. If it factors, use the zero-product rule: each factor can be 0, which usually gives two solutions. If there is no x term, take the square root of both sides and keep both the positive and the negative root. When factoring is hard, use the quadratic formula, which is on the GED formula sheet.
Key formulas
Standard form
ax2+bx+c=0
Zero-product rule
(x−p)(x−q)=0⇒x=p or x=q
Square root of both sides
x2=k⇒x=±k
Quadratic formula
x=2a−b±b2−4ac
Solving by square roots
Method. Take the square root of both sides and keep both signs.
Worked example. What are the solutions of x2 = 49?
(A) x = 7 or x = −7
(B) x = 7 only
(C) x = 24.5 or x = −24.5
(D) x = 2401
AnswerA — x = 7 or x = −7
Step-by-step
Take the square root of both sides, keeping both signs: x = ±√49.
√49 = 7, so x = 7 or x = −7.
Fast methodAsk which numbers squared give 49, and remember the negative one.
A (x = 8 or x = −5): used the numbers in the factors as the solutions without changing their signs
B (x = 5 only): kept only the positive solution
D (x = −20 or x = 2): chose a factor pair of −40 without checking that it adds to 3
Using the quadratic formula
Method. Read off a, b and c, then substitute into the formula carefully.
Worked example. What is the positive solution of 2x2 − 3x − 4 = 0, to the nearest hundredth?
(A) 4.70
(B) 2.35
(C) 0.85
(D) 1.95
AnswerB — 2.35
Step-by-step
Here a = 2, b = −3, c = −4.
The discriminant is b2 − 4ac = 9 − (−32) = 41.
x = (3 + √41) ÷ 4, and √41 ≈ 6.403.
(3 + 6.403) ÷ 4 ≈ 2.35.
Fast methodWrite a, b and c with their signs before you substitute; −b is +3 here.
Quick checkCheck: 2 × 2.352 − 3 × 2.35 − 4 = 11.045 − 7.05 − 4, which is about 0 ✓.
Why the other choices are wrong
A (4.70): divided by 2 instead of by 2a = 4
C (0.85): used b = −3 in place of −b: (−3 + √41) ÷ 4
D (1.95): squared −3 as −9: √(−9 + 32) = √23
Functions, Slope and Graphs
A function gives exactly one output for each input; f(3) means put 3 in for x. The slope of a line is the rate of change, rise over run, and in y = mx + b the slope is m and the y-intercept (where the line crosses the y-axis) is b. The x-intercept is where y = 0. To compare two linear functions given in different ways (an equation, a table, a description of a graph), find the slope and the starting value of each.
Key formulas
Slope from two points
m=x2−x1y2−y1
Slope-intercept form
y=mx+b
Point-slope form
y−y1=m(x−x1)
Intercepts
x-intercept: y=0,y-intercept: x=0
Evaluating a function
f(x)=2x+1⇒f(4)=2(4)+1
Evaluating a function
Method. Substitute in brackets and follow the order of operations.
Worked example. If f(x) = 3x2 − 2x + 5, what is f(−2)?
(A) 13
(B) 45
(C) −3
(D) 21
AnswerD — 21
Step-by-step
Square first: (−2)2 = 4, so 3x2 = 3 × 4 = 12.
Next, −2x = −2 × (−2) = 4.
Add: 12 + 4 + 5 = 21.
Fast methodPut −2 in brackets everywhere you see x.
Quick checkCheck the middle term: subtracting 2 × (−2) is adding 4 ✓.
Why the other choices are wrong
A (13): took −2x as −4 instead of +4: 12 − 4 + 5
B (45): squared 3 × (−2) instead of only −2: 36 + 4 + 5
C (−3): treated (−2)2 as −4: −12 + 4 + 5
Slope from two points
Method. Rise over run, subtracting in the same order.
Worked example. What is the slope of the line through (−1, 4) and (3, −8)?
(A) −3
(B) 3
(C) −1/3
(D) −6
AnswerA — −3
Step-by-step
Rise: −8 − 4 = −12.
Run: 3 − (−1) = 4.
Slope: −12 ÷ 4 = −3.
Fast methodSubtract in the same order on top and bottom: second point minus first point.
Quick checkFrom (−1, 4), going 4 right and 12 down reaches (3, −8) ✓.
Why the other choices are wrong
B (3): lost the negative sign of the rise
C (−1/3): divided the run by the rise
D (−6): found the run as 3 − 1 = 2 instead of 3 − (−1) = 4
Comparing two linear functions
Method. Write both functions as y = mx + b, then set them equal.
Worked example. Plan A for a moving truck costs C = 35 + 0.20m dollars for m miles. For Plan B, a table shows: 100 miles cost $50, 200 miles cost $80, and 300 miles cost $110. For how many miles do the two plans cost the same?
(A) 175
(B) 30
(C) 150
(D) 75
AnswerC — 150
Step-by-step
Plan B’s rate: (80 − 50) ÷ (200 − 100) = 30 ÷ 100 = 0.30 dollars per mile.
Plan B’s starting fee: 50 − 0.30 × 100 = 50 − 30 = 20, so B is C = 20 + 0.30m.
Set the costs equal: 35 + 0.20m = 20 + 0.30m, so 15 = 0.10m.
m = 15 ÷ 0.10 = 150 miles.
Fast methodPlan A starts $15 higher and Plan B catches up by $0.10 per mile: 15 ÷ 0.10 = 150.
Quick checkCheck: Plan A 35 + 0.20 × 150 = 65, and Plan B 20 + 0.30 × 150 = 65 ✓.
Why the other choices are wrong
A (175): took Plan B’s rate as 80 ÷ 200 = 0.40, which ignores its starting fee
B (30): added the rates instead of subtracting them: 15 ÷ 0.5 = 30
D (75): divided the fee difference by Plan A’s rate only: 15 ÷ 0.2 = 75
01.03 Formula Sheet
The GED Mathematical Reasoning test lasts 115 minutes, uses multiple-choice (A–D) and fill-in-the-blank questions, and a wrong answer does not count against you. The first part allows no calculator; the second part has an on-screen calculator. A formula sheet is available for the whole test, but it only lists formulas: it does not tell you which one fits a question, what the letters stand for, or which units the answer comes in. This topic goes through each group of formulas on the sheet in turn: area and perimeter, circles, surface area and volume, the Pythagorean theorem, slope and the equations of a line, the quadratic formula, and simple interest, distance, total cost and the data formulas for the mean and the median. A few extra formulas that the sheet does not give are included because they save time; their labels say so, and you must know those yourself. Each section says when to use each formula, what units to expect, and the mistakes that cost the most points.
Perimeter is the distance around a flat shape, so it is measured in plain units such as feet; use it for fencing, trim or a border. Area is the amount of surface inside, measured in square units such as square feet; use it for carpet, paint or tile. The height in every area formula is measured straight across at a right angle to the base, never along a slanted side. Common mistakes: forgetting the 1/2 for triangles and trapezoids, using a slanted side as the height, and mixing feet with inches (6 inches is 0.5 foot, not 0.6).
Key formulas
Square with side s
A=s2,P=4s
Rectangle with length l and width w
A=lw,P=2l+2w
Parallelogram with base b and height h
A=bh
Triangle with base b and height h; perimeter from its three sides
A=21bh,P=s1+s2+s3
Trapezoid with parallel sides b_1 and b_2
A=21h(b1+b2)
Area of a trapezoid
Method. For a trapezoid, add the two parallel sides, multiply by the height, then halve.
Worked example. A garden bed is shaped like a trapezoid. Its parallel sides are 7.5 feet and 11.5 feet long, and the distance between them is 6 feet. What is the area of the garden bed in square feet?
(A) 114
(B) 57
(C) 25
(D) 34.5
AnswerB — 57
Step-by-step
Add the parallel sides: 7.5 + 11.5 = 19 feet.
Multiply by the height: 6 × 19 = 114.
Take half: 114 ÷ 2 = 57 square feet.
Fast methodHalf of 6 is 3, and 3 × 19 = 57.
Quick checkCheck: the average of the parallel sides is 9.5, and 9.5 × 6 = 57 ✓.
Why the other choices are wrong
A (114): forgot the 1/2: 6 × 19 = 114
C (25): added all three numbers: 7.5 + 11.5 + 6 = 25
D (34.5): treated the shape as a triangle on the longer side: 11.5 × 6 ÷ 2 = 34.5
Area of a parallelogram
Method. Multiply the base by the height measured straight across, not by the slanted side.
Worked example. A parking space is painted in the shape of a parallelogram. Its base is 19 feet, each slanted side is 9.5 feet, and the height measured at a right angle to the base is 8 feet. What is the area of the space?
(A) 180.5 square feet
(B) 57 square feet
(C) 76 square feet
(D) 152 square feet
AnswerD — 152 square feet
Step-by-step
The area of a parallelogram is base × height, with the height at a right angle to the base.
A = 19 × 8 = 152 square feet.
Fast methodIgnore the slanted side; it is only needed for the perimeter.
Quick checkCheck: 152 ÷ 19 = 8, the height ✓.
Why the other choices are wrong
A (180.5 square feet): used the slanted side as the height: 19 × 9.5 = 180.5
B (57 square feet): found the perimeter: 2 × 19 + 2 × 9.5 = 57
C (76 square feet): took half as for a triangle: 19 × 8 ÷ 2 = 76
Perimeter with mixed units
Method. Put every length in the same unit first, then add all the sides and remove any part that is not covered.
Worked example. A rectangular room is 14 feet long and 11 feet 6 inches wide. Baseboard trim will go all the way around the room except across a doorway that is 3 feet wide. How many feet of trim are needed? Type your answer as a number.
Answer48 (accepted: 48, 48.0)
Step-by-step
Change the width to feet: 6 inches is 6 ÷ 12 = 0.5 foot, so the width is 11.5 feet.
Perimeter: 2 × 14 + 2 × 11.5 = 28 + 23 = 51 feet.
Leave out the doorway: 51 − 3 = 48 feet.
Fast methodAdd length and width, double, and subtract the doorway: (14 + 11.5) × 2 − 3 = 48.
Use the circumference for the distance around a circle (a rim, a border, one turn of a wheel); it is a length in plain units. Use the area for the surface inside (a lid, a lawn, a pizza); it is in square units. Both formulas use the radius r, which is half the diameter d. Common mistakes: putting the diameter in for the radius, writing 2πd for the circumference, and multiplying π by r before squaring. When a question says to use 3.14, use it; otherwise use the calculator's π key and round only at the end.
Key formulas
Diameter and radius (follows from C = 2πr = πd)
d=2r,r=2d
Circumference
C=2πr=πd
Area
A=πr2
Value of pi
π≈3.14
Circumference
Method. Distance around means circumference: C = πd with the diameter, or 2πr with the radius.
Worked example. A circular skylight is 38 inches across. A rubber weather seal will be fitted all the way around its rim. Using 3.14 for π, how long is the seal?
(A) 238.64 inches
(B) 1133.54 inches
(C) 119.32 inches
(D) 59.66 inches
AnswerC — 119.32 inches
Step-by-step
The rim is the circumference, and '38 inches across' is the diameter, so use C = πd.
C = 3.14 × 38 = 119.32 inches.
Fast methodWith the diameter in hand, multiply it by π once; no doubling is needed.
Quick checkCheck: the radius is 19, and 2 × 3.14 × 19 = 119.32 ✓.
Why the other choices are wrong
A (238.64 inches): used 2πd, doubling the diameter: 2 × 3.14 × 38 = 238.64
B (1133.54 inches): found the area with r = 19: 3.14 × 361 = 1133.54
D (59.66 inches): multiplied π by the radius only: 3.14 × 19 = 59.66
Area of a circle
Method. Area means A = πr²: square the radius, then multiply by π, and round at the very end.
Worked example. A round fountain basin in a park has a radius of 13 feet. To the nearest square foot, what is the area of the floor of the basin? Use the π key on the calculator.
(A) 531 square feet
(B) 2124 square feet
(C) 82 square feet
(D) 1668 square feet
AnswerA — 531 square feet
Step-by-step
Square the radius first: 13 × 13 = 169.
Multiply by π: 169 × π is about 530.93.
To the nearest square foot, the area is 531 square feet.
Fast methodSquare, then multiply by π; with 3.14 you get 530.66, which also rounds to 531.
Quick checkCheck: a 26 by 26 square around the circle has area 676, and the circle fills about 0.785 of it: 0.785 × 676 = 530.66 ✓.
Why the other choices are wrong
B (2124 square feet): used the diameter 26 as the radius: 676 × π is about 2124
C (82 square feet): found the circumference: 2 × π × 13 is about 82
D (1668 square feet): squared π × 13 instead of squaring only 13: about 40.84 squared, which is about 1668
Rectangle with a semicircle
Method. Break a composite shape into pieces on the sheet; a half circle is half of πr², with r half the flat side.
Worked example. A window is a rectangle 36 inches wide and 50 inches tall, with a half circle on top. The flat side of the half circle is the 36-inch top edge of the rectangle. Using 3.14 for π, what is the total area of the window to the nearest square inch? Type your answer as a whole number.
Answer2309 (accepted: 2309)
Step-by-step
Rectangle: 36 × 50 = 1800 square inches.
The half circle has diameter 36, so its radius is 18 and 18 × 18 = 324.
Half circle: 3.14 × 324 = 1017.36, and half of that is 1017.36 ÷ 2 = 508.68 square inches.
Total: 1800 + 508.68 = 2308.68, which rounds to 2309 square inches.
Fast methodSplit the window into a rectangle and half of a circle, find each area, and add.
Quick checkCheck: the window is less than a 36 by 68 rectangle around it, 36 × 68 = 2448, and more than the 1800 rectangle alone ✓.
Surface Area and Volume
Volume is the space a solid holds, in cubic units; use it for filling, pouring or packing. Surface area is the total area of all its faces, in square units; use it for wrapping, painting or labels. In the formulas, B is the area of the base (a square-unit amount, found first), p is the perimeter of the base, h is the height straight up from the base, and s is the slant height along a side of a pyramid or cone. Common mistakes: using the slant height s in a volume formula, forgetting the 1/3 for pyramids and cones, using the diameter for r, and leaving out the top or bottom of a closed shape.
Key formulas
Prism (any base)
V=Bh,SA=ph+2B
Cylinder
V=πr2h,SA=2πrh+2πr2
Pyramid
V=31Bh,SA=21ps+B
Cone
V=31πr2h,SA=πrs+πr2
Sphere
V=34πr3,SA=4πr2
Volume of a rectangular prism
Method. Holding or filling means volume: find the base area, then multiply by the height.
Worked example. A rectangular storage bin is 32 inches long, 14 inches wide and 9 inches deep. How much space is inside the bin?
(A) 1724 cubic inches
(B) 55 cubic inches
(C) 4032 cubic inches
(D) 1344 cubic inches
AnswerC — 4032 cubic inches
Step-by-step
The base is a rectangle: B = 32 × 14 = 448 square inches.
Volume: V = Bh = 448 × 9 = 4032 cubic inches.
Fast methodFor a box, multiply length × width × height.
A (1724 cubic inches): found the surface area: 2 × (448 + 288 + 126) = 1724
B (55 cubic inches): added the three dimensions: 32 + 14 + 9 = 55
D (1344 cubic inches): used the 1/3 that belongs to a pyramid: 4032 ÷ 3 = 1344
Volume of a cone
Method. Use V = (1/3)πr²h with the height, not the slant height, and square the radius before anything else.
Worked example. A grain hopper at a feed mill is shaped like a cone with the point at the bottom. Its top has a radius of 3 feet, and it is 7 feet deep. Using 3.14 for π, how much grain does the hopper hold when it is full?
(A) 65.94 cubic feet
(B) 197.82 cubic feet
(C) 263.76 cubic feet
(D) 21.98 cubic feet
AnswerA — 65.94 cubic feet
Step-by-step
Square the radius: 3 × 3 = 9.
Multiply by π and the height: 3.14 × 9 = 28.26, and 28.26 × 7 = 197.82.
Take one third: 197.82 ÷ 3 = 65.94 cubic feet.
Fast methodA cone holds one third of a cylinder with the same radius and height.
B (197.82 cubic feet): forgot the 1/3 and found the cylinder: 3.14 × 9 × 7 = 197.82
C (263.76 cubic feet): used the diameter 6 as the radius: 3.14 × 36 × 7 ÷ 3 = 263.76
D (21.98 cubic feet): did not square the radius: 3.14 × 3 × 7 ÷ 3 = 21.98
Surface area of a cylinder
Method. Covering means surface area: add the side, 2πrh, and both circular ends, 2πr².
Worked example. A closed cylindrical can has a radius of 7 centimeters and a height of 18 centimeters. To the nearest square centimeter, how much metal covers the whole outside of the can, including the top and bottom? Use the π key on the calculator.
(A) 792 square centimeters
(B) 1100 square centimeters
(C) 946 square centimeters
(D) 2771 square centimeters
AnswerB — 1100 square centimeters
Step-by-step
Side: 2πrh = 2 × 7 × 18 × π = 252π.
Top and bottom: 2πr² = 2 × 49 × π = 98π.
Total: 252π + 98π = 350π, which is about 1099.56, so 1100 square centimeters.
Fast methodCollect the whole answer as a number times π first (350π), then press π once.
Quick checkCheck: 350 × 3.14 = 1099, close to 1100 ✓.
Why the other choices are wrong
A (792 square centimeters): found only the side: 252π is about 792
C (946 square centimeters): included only one end: 252π + 49π = 301π, about 946
D (2771 square centimeters): found the volume: π × 49 × 18 = 882π, about 2771
Pythagorean Theorem
Use the Pythagorean theorem only in a right triangle, to find one side when the other two are known. The hypotenuse c is the side across from the right angle and is always the longest side; a and b are the two legs. A diagonal of a rectangle and the straight-line distance between two points on a grid are both hypotenuses. All three sides must be in the same unit. Common mistakes: adding the sides instead of their squares, forgetting the square root at the end, and adding the squares when the missing side is a leg (then you subtract from c²).
Key formulas
Pythagorean theorem (right triangle)
a2+b2=c2
Finding the hypotenuse (the theorem above, solved for c)
c=a2+b2
Finding a leg (the theorem above, solved for a)
a=c2−b2
Distance between two points (not on the GED sheet: know it)
d=(x2−x1)2+(y2−y1)2
Finding the hypotenuse
Method. A diagonal of a rectangle is a hypotenuse: c = √(a² + b²).
Worked example. A rectangular garden gate is 45 inches wide and 28 inches tall. A wooden brace runs diagonally from one corner to the opposite corner. How long is the brace?
(A) 73 inches
(B) 2809 inches
(C) about 35.2 inches
(D) 53 inches
AnswerD — 53 inches
Step-by-step
The brace is the hypotenuse of a right triangle with legs 45 and 28.
Square and add: 452 + 282 = 2025 + 784 = 2809.
Take the square root: 53 × 53 = 2809, so the brace is 53 inches long.
Fast methodSquare both sides, add, and press the square-root key.
Quick checkCheck: 53 is longer than 45 but shorter than 45 + 28 = 73 ✓.
Why the other choices are wrong
A (73 inches): added the two sides: 45 + 28 = 73
B (2809 inches): forgot to take the square root of 2809
C (about 35.2 inches): subtracted the squares: the square root of 2025 − 784 = 1241 is about 35.2
Finding a leg
Method. Missing leg: a = √(c² − b²), where c is the longest side.
Worked example. A straight wheelchair ramp is 30 feet long along its sloped surface and covers 29.9 feet of level ground. To the nearest tenth of a foot, how high does the ramp rise?
(A) 42.4 feet
(B) 0.1 foot
(C) 2.4 feet
(D) 5.99 feet
AnswerC — 2.4 feet
Step-by-step
The sloped surface, 30 feet, is the hypotenuse; the ground and the rise are the legs.
Take the square root: the square root of 5.99 is about 2.447, so the rise is about 2.4 feet.
Fast methodWhen the hypotenuse is known, subtract the squares instead of adding them.
Quick checkCheck: 2.447 squared is about 5.99, and 5.99 + 894.01 = 900 ✓. The ramp rises about 1 foot for every 12 feet of ground, a gentle slope.
Why the other choices are wrong
A (42.4 feet): added the squares as if 30 were a leg: the square root of 1794.01 is about 42.4
B (0.1 foot): subtracted the lengths: 30 − 29.9 = 0.1
D (5.99 feet): forgot to take the square root of 5.99
Distance between two points
Method. Subtract the x-values and the y-values, then use them as the legs in a² + b² = c².
Worked example. On a town map with a grid in miles, a library is at (−4, 1) and a park is at (7, 9). To the nearest tenth of a mile, what is the straight-line distance between them?
Take the square root: the square root of 185 is about 13.60, so 13.6 miles.
Fast methodTreat the two changes as the legs of a right triangle and find its hypotenuse.
Quick checkCheck: 13.6 is longer than 11 and shorter than 11 + 8 = 19 ✓.
Why the other choices are wrong
B (19 miles): added the two changes: 11 + 8 = 19
C (8.5 miles): dropped the negative sign: 7 − 4 = 3, and the square root of 9 + 64 = 73 is about 8.5
D (185 miles): forgot to take the square root of 185
Slope, Point-Slope and Slope-Intercept Form
Slope m is the rate of change: how much y changes for each 1 unit of x, in units such as dollars per hour or miles per gallon. Use the slope formula when you know two points. Use slope-intercept form y = mx + b when you know the slope and the starting value b (the value of y when x is 0, such as a flat fee). Use point-slope form when you know the slope and any one point. Common mistakes: subtracting the x-values and y-values in opposite orders, putting the run over the rise, and sign slips with x₁ and y₁ when a coordinate is negative.
Key formulas
Slope through two points
m=x2−x1y2−y1
Slope-intercept form
y=mx+b
Point-slope form
y−y1=m(x−x1)
Horizontal and vertical lines (not on the GED sheet: know it)
y=k(m=0),x=k(m undefined)
Parallel lines (not on the GED sheet: know it)
m1=m2
Slope from two points
Method. Subtract the y-values and the x-values in the same order, then divide rise by run.
Worked example. What is the slope of the line through the points (−2, 7) and (6, −5)?
(A) 3/2
(B) −3/2
(C) −2/3
(D) −3
AnswerB — −3/2
Step-by-step
Change in y: −5 − 7 = −12.
Change in x, in the same order: 6 − (−2) = 8.
Slope: −12/8 = −3/2.
Fast methody goes down while x goes up, so the slope must be negative.
Quick checkCheck: from (−2, 7), move 8 right and 12 down to reach (6, −5) ✓.
Why the other choices are wrong
A (3/2): lost the negative sign: 12/8 = 3/2
C (−2/3): put the run over the rise: 8/(−12) = −2/3
D (−3): treated −2 as 2 in the x-change: −12/(6 − 2) = −3
Starting value from two data points
Method. The price per guest is the slope m; the booking fee is the starting value b in y = mx + b.
Worked example. A caterer charges a booking fee plus the same price for every guest. A party for 30 guests costs $595.00 and a party for 75 guests costs $1,225.00. What is the booking fee in dollars? Type your answer as a number.
Answer175 (accepted: 175, 175.00, 175.0)
Step-by-step
The extra 75 − 30 = 45 guests cost 1,225.00 − 595.00 = 630.00 dollars.
Slope (price per guest): 630.00 ÷ 45 = 14.00 dollars per guest.
Booking fee: the 30-guest party had 14 × 30 = 420 dollars of guest charges, and 595 − 420 = 175 dollars.
Fast methodFind the slope from the two parties, then use y = mx + b with one party to find b.
Method. Put the point and slope into y − y₁ = m(x − x₁), watching the signs, then solve for y.
Worked example. A line has slope −4/3 and passes through the point (6, −1). Which equation describes the line?
(A) y = −(4/3)x − 9
(B) y = −(4/3)x + 9
(C) y = (4/3)x − 9
(D) y = −(4/3)x + 7
AnswerD — y = −(4/3)x + 7
Step-by-step
Point-slope form: y − (−1) = −(4/3)(x − 6), so y + 1 = −(4/3)(x − 6).
Distribute: −(4/3) × (−6) = 8, so y + 1 = −(4/3)x + 8.
Subtract 1: y = −(4/3)x + 7.
Fast methodPut x = 6 into each choice with the right slope; only one gives y = −1.
Quick checkCheck: −(4/3) × 6 + 7 = −8 + 7 = −1 ✓.
Why the other choices are wrong
A (y = −(4/3)x − 9): wrote x + 6 instead of x − 6: y + 1 = −(4/3)(x + 6) gives y = −(4/3)x − 9
B (y = −(4/3)x + 9): wrote y − 1 instead of y + 1: y − 1 = −(4/3)x + 8 gives y = −(4/3)x + 9
C (y = (4/3)x − 9): dropped the negative sign of the slope: y + 1 = (4/3)(x − 6) gives y = (4/3)x − 9
Quadratic Formula
Use the quadratic formula to solve any equation with an x² term, especially one that does not factor neatly. First move every term to one side so the equation reads ax² + bx + c = 0, then read a, b and c with their signs. The expression under the square root, b² − 4ac, tells you how many real solutions there are. Common mistakes: forgetting to set the equation equal to 0, writing −b as negative when b is already negative, dividing only the square root by 2a instead of the whole top, and keeping a negative answer for a time or a length.
Key formulas
Standard form
ax2+bx+c=0,a=0
Quadratic formula
x=2a−b±b2−4ac
Discriminant (not on the GED sheet: know it)
b2−4ac
Number of real solutions (not on the GED sheet: know it)
b2−4ac>0:2,=0:1,<0:0
Quadratic formula with a perfect-square discriminant
Method. Read a, b and c with their signs, find b² − 4ac, then divide the whole top by 2a.
Worked example. What are the solutions of 2x2 − 3x − 20 = 0?
(A) x = −4 or x = 2.5
(B) x = 8 or x = −5
(C) x = 4 or x = −2.5
(D) x = 6.25 or x = −0.25
AnswerC — x = 4 or x = −2.5
Step-by-step
Here a = 2, b = −3 and c = −20.
Discriminant: (−3)2 − 4 × 2 × (−20) = 9 + 160 = 169, and the square root of 169 is 13.
x = (3 + 13)/4 = 16/4 = 4 or x = (3 − 13)/4 = −10/4 = −2.5.
Fast methodSince b = −3, the top starts with −b = +3.
A (x = −4 or x = 2.5): used −b = −3 instead of +3: (−3 ± 13)/4 gives 2.5 and −4
B (x = 8 or x = −5): divided by 2 instead of 2a = 4: (3 ± 13)/2 gives 8 and −5
D (x = 6.25 or x = −0.25): divided only the square root by 4: 3 + 13/4 = 6.25 and 3 − 13/4 = −0.25
Rearranging before using the formula
Method. Always rewrite as ax² + bx + c = 0 before reading a, b and c.
Worked example. What is the positive solution of x2 + 6x = 11, to the nearest hundredth?
(A) 7.47
(B) 1.47
(C) 2.94
(D) No real solution
AnswerB — 1.47
Step-by-step
Set the equation equal to 0: x2 + 6x − 11 = 0, so a = 1, b = 6 and c = −11.
Discriminant: 62 − 4 × 1 × (−11) = 36 + 44 = 80, and the square root of 80 is about 8.944.
Positive solution: x = (−6 + 8.944)/2 = 2.944/2, which is about 1.47.
Fast methodMove the 11 first; then c is −11, not +11.
Quick checkCheck: 1.47 squared is about 2.16, and 2.16 + 6 × 1.47 = 2.16 + 8.82 = 10.98, close to 11 ✓.
Why the other choices are wrong
A (7.47): used +b instead of −b: (6 + 8.944)/2 is about 7.47
C (2.94): forgot to divide by 2a = 2: −6 + 8.944 is about 2.94
D (No real solution): left c as +11 without moving it: 36 − 44 = −8 is negative, so it seemed to have no solution
Quadratic model in context
Method. Set the model equal to the value asked for (here 140), rearrange to equal 0, use the formula, and reject answers that cannot happen.
Worked example. A rectangular rug 8 feet by 10 feet lies in the middle of a rectangular room, leaving a strip of bare floor x feet wide on every side. The whole floor has an area of 140 square feet. To the nearest hundredth of a foot, how wide is the strip?
Set it equal to 140 and move 140 across: 4x2 + 36x − 60 = 0, so a = 4, b = 36 and c = −60.
Discriminant: 362 − 4 × 4 × (−60) = 1296 + 960 = 2256, and the square root of 2256 is about 47.497.
The two solutions are (−36 + 47.497)/8 = 11.497/8, about 1.44, and (−36 − 47.497)/8 = −83.497/8, about −10.44.
A width cannot be negative, so the strip is about 1.44 feet wide.
Fast methodFind both solutions and keep the one that makes sense: a positive width.
Quick checkCheck: with x = 1.44 the floor is 8 + 2.88 = 10.88 by 10 + 2.88 = 12.88 feet, and 10.88 × 12.88 is about 140.13, about 140 ✓.
Why the other choices are wrong
A (−10.44 feet): kept the negative solution, which is not a possible width: (−36 − 47.497)/8 is about −10.44
B (2.87 feet): put the strip on one side only, (8 + x)(10 + x) = 140, so x2 + 18x − 60 = 0 and (−18 + 23.749)/2 is about 2.87
C (10.87 feet): gave the floor's shorter side, 8 + 2 × 1.437, about 10.87, instead of the strip width x
Simple Interest, Distance, Total Cost and Averages
Simple interest I = Prt uses the principal P in dollars, the yearly rate r as a decimal, and the time t in years, so 18 months is 1.5 years. The interest is only the extra; the amount owed or saved at the end is P + I. Distance = rate × time needs matching units: miles per hour goes with hours, so change minutes to hours first, and 3.5 hours is 3 hours 30 minutes. Total cost is the number of units times the price per unit, plus any fixed fee, and when the price changes after some number of units, cost each part separately. Common mistakes: writing 6.5% as 6.5, using months as years, and giving the interest when the question asks for the total. The sheet also gives the two data formulas. The mean is the sum of the values divided by how many values there are. The median is the middle value once the values are in order; with an even number of values it is the mean of the two middle values. Common mistakes: finding the median without sorting first, and dividing by the wrong count.
Key formulas
Simple interest
I=Prt
Amount at the end (not on the GED sheet: know it)
A=P+I=P(1+rt)
Distance, rate and time (the second and third are d = rt rearranged)
d=rt,r=td,t=rd
Total cost
total cost=(number of units)×(price per unit)
Mean
mean=number of valuessum of the values
Median
median=middle value in order, or the mean of the two middle values
Simple interest for part of a year
Method. In I = Prt, the rate is a decimal and the time is in years.
Worked example. Rosa borrows $2,400 at 6.5% simple interest per year and repays the loan after 18 months. How much interest does she pay?
(A) $234
(B) $2,808
(C) $156
(D) $2,634
AnswerA — $234
Step-by-step
Write the rate as a decimal: 6.5% = 0.065. Write the time in years: 18 months = 18 ÷ 12 = 1.5 years.
One year of interest: 2400 × 0.065 = 156 dollars.
For 1.5 years: 156 × 1.5 = 234, so the interest is $234.
Fast methodFind one year of interest, then multiply by the number of years.
Quick checkCheck: half a year is 156 ÷ 2 = 78, and 156 + 78 = 234 ✓.
Why the other choices are wrong
B ($2,808): used 18 as the number of years: 156 × 18 = 2808
C ($156): used only one year of interest: 2400 × 0.065 = 156
D ($2,634): gave the total repaid instead of the interest: 2400 + 234 = 2634
Time from distance and rate
Method. Solve d = rt for the unknown, t = d/r, and convert decimal hours to minutes.
Worked example. A delivery driver travels 147 miles at an average speed of 42 miles per hour. How long does the trip take?
(A) 3 hours 50 minutes
(B) about 0.29 hour
(C) 3 hours 30 minutes
(D) 6,174 hours
AnswerC — 3 hours 30 minutes
Step-by-step
Use t = d ÷ r: 147 ÷ 42 = 3.5 hours.
The 0.5 hour is half of 60 minutes: 0.5 × 60 = 30 minutes.
The trip takes 3 hours 30 minutes.
Fast methodDivide distance by speed, then turn the decimal part of an hour into minutes by multiplying by 60.
Quick checkCheck: 42 × 3.5 = 147 miles ✓.
Why the other choices are wrong
A (3 hours 50 minutes): read 3.5 hours as 3 hours 50 minutes
B (about 0.29 hour): divided the speed by the distance: 42 ÷ 147 is about 0.29
D (6,174 hours): multiplied instead of dividing: 147 × 42 = 6174
Total cost with a fee and two prices
Method. Total cost = number × price for each price band, plus any fixed fee.
Worked example. A print shop charges a $35 setup fee, $0.18 for each of the first 500 flyers, and $0.12 for each flyer after the first 500. What is the total cost of 1,250 flyers?
(A) $260
(B) $215
(C) $180
(D) $275
AnswerB — $215
Step-by-step
The first 500 flyers: 500 × 0.18 = 90 dollars.
The rest: 1250 − 500 = 750 flyers, and 750 × 0.12 = 90 dollars.
Total: 35 + 90 + 90 = 215, so $215.
Fast methodSplit the order at 500, cost each part at its own price, then add the fee.
Quick checkCheck: 215 − 35 = 180 dollars for printing, and 90 + 90 = 180 ✓.
Why the other choices are wrong
A ($260): charged $0.18 for every flyer: 35 + 1250 × 0.18 = 35 + 225 = 260
C ($180): left out the setup fee: 90 + 90 = 180
D ($275): charged $0.12 on all 1,250 flyers after the first 500: 35 + 90 + 150 = 275
Mean and median
Method. Mean: add and divide by the count. Median: sort first, then take the middle value or the mean of the two middle values.
Worked example. A home-care agency logged the visits its nurses made on five weekdays: 41, 35, 52, 38 and 49. What are the mean and the median number of visits?
(A) Mean 43, median 41
(B) Mean 43, median 17
(C) Mean 53.75, median 41
(D) Mean 43, median 52
AnswerA — Mean 43, median 41
Step-by-step
Add the values: 41 + 35 + 52 + 38 + 49 = 215.
Mean: there are 5 values, so 215 ÷ 5 = 43.
Put the values in order: 35, 38, 41, 49, 52.
There is an odd number of values, so the median is the single middle (third) value: 41.
Fast methodSort the list once; with five values the median is the third one.
Quick checkCheck: 43 × 5 = 215 ✓, and the mean 43 lies between the smallest value 35 and the largest value 52 ✓.
Why the other choices are wrong
B (Mean 43, median 17): gave the range as the median: 52 − 35 = 17
C (Mean 53.75, median 41): divided the sum by 4 instead of 5: 215 ÷ 4 = 53.75
D (Mean 43, median 52): took the middle of the list without sorting it first: 41, 35, 52, 38, 49 has 52 in the middle