ISEE Lower Level · Mathematics · Unit 04 Mathematics AchievementMathematics Achievement: Unit Study Guide
04.01 Whole Numbers and Operations
The Lower Level ISEE has a 30-question Mathematics Achievement section in 30 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers whole numbers: place value, the four operations, factors and multiples, primes, divisibility and simple exponents.
Whole Numbers, Place Value, Odd and Even
Each place in a whole number is worth 10 times the place to its right. On a number line, first find what one space is worth, then count the spaces. Odd and even numbers follow simple rules when you add, subtract or multiply.
Key formulas| Place value | 3,482=3000+400+80+2 |
| Round to the nearest ten | ones digit 5 or more: round up; 47→50, 43→40 |
| Number line | one space=distance between two labels÷number of spaces |
| Even and odd | even numbers end in 0,2,4,6,8; odd numbers end in 1,3,5,7,9 |
| Add or subtract | even±even=even, odd±odd=even, odd±even=odd |
| Multiply | even×any whole number=even, odd×odd=odd |
| Order does not matter | 4+7=7+4,3×5=5×3 |
| Fact family | 6×8=48 ⇒ 48÷8=6 |
Whole numbers on a number line
Method. Find the value of one space (2), then multiply by the number of spaces to P (6).
Worked exampleOn the number line, what number does point P show?

AnswerC — 12
Step-by-step- From 0 to 20 there are 10 equal spaces.
- So each space is 20 ÷ 10 = 2.
- P is 6 spaces from 0: 6 × 2 = 12.
Quick checkP is 4 spaces before 20: 20 − 8 = 12.
Common mistakes- A (6): counted the 6 spaces to P without using the scale
- B (8): counted the spaces back from the right end: 4 × 2 = 8
- D (14): counted tick marks (including the one at 0) instead of spaces: 7 × 2 = 14
Factors, Multiples and Primes
A factor divides a number with no remainder, and factors come in pairs that multiply to the number. The multiples of a number are that number times 1, 2, 3, and so on. A prime number has exactly two factors, 1 and itself; 1 is not prime.
Key formulas| Factor pairs | 24=1×24=2×12=3×8=4×6 |
| Multiples | multiples of 6: 6, 12, 18, 24, … |
| Prime | exactly two factors: 2, 3, 5, 7, 11, 13, … |
| Composite | more than two factors: 4, 6, 9, 15, … |
| Divisible by 2, 5 or 10 | last digit even; last digit 0 or 5; last digit 0 |
| Divisible by 3 or 9 | sum of the digits divisible by 3 or by 9 |
Primes — which is prime
Method. Test the small primes 2, 3, 5, 7 only (any composite below 100 has one of them as a factor): digit sum for 3, last digit for 2 and 5, and 7 by trial.
Worked exampleWhich of these numbers is prime?
AnswerD — 53
Step-by-step- A prime has exactly two factors, 1 and itself.
- 53 has no factor other than 1 and 53.
- 33 = 3 × 11.
- 21 = 3 × 7.
- 27 = 3 × 9.
Quick checkCheck 53 ÷ 2, 3, 5, 7: none divides evenly.
Common mistakes- A (21): overlooked that 21 = 3 × 7
- B (27): overlooked that 27 = 3 × 9
- C (33): overlooked that 33 = 3 × 11
Factors — list all factors
Method. Find factor pairs from 1 upward (1 × 24, 2 × 12, 3 × 8, 4 × 6); 5 is not a factor and 6 is already in a pair, so stop.
Worked exampleWhich list shows all of the factors of 24?
A1, 2, 3, 24
B1, 2, 3, 4, 6, 8, 12, 24
C1, 2, 3, 6, 8, 12, 24
D1, 2, 3, 4, 5, 6, 8, 12, 24
AnswerB — 1, 2, 3, 4, 6, 8, 12, 24
Step-by-step- Test each whole number from 1 up: factors come in pairs.
- The factor pairs of 24 are 1 × 24, 2 × 12, 3 × 8, 4 × 6.
- All factors: 1, 2, 3, 4, 6, 8, 12, 24.
Quick checkEach listed number divides 24 evenly, and the count 8 matches the pairs.
Common mistakes- A (1, 2, 3, 24): listed only the prime factors, 1 and the number
- C (1, 2, 3, 6, 8, 12, 24): left out the factor 4
- D (1, 2, 3, 4, 5, 6, 8, 12, 24): included 5, which is not a factor
Multiples — least multiple above
Method. Divide 31 by 7, take the whole part, add 1, and multiply back.
Worked exampleWhat is the least multiple of 7 that is greater than 31?
AnswerB — 35
Step-by-step- 31 ÷ 7 = 4 remainder 3.
- So 7 × 4 = 28 is below 31.
- The next multiple is 7 × 5 = 35.
Quick check35 > 31 and 35 − 7 = 28 ≤ 31.
Common mistakes- A (28): gave the multiple just below
- C (38): added the number to the starting number
- D (42): went one multiple too far
Factors — how many factors
Method. Factor pairs: 1 × 16, 2 × 8, 4 × 4. The first two pairs give 4 factors and 4 × 4 gives 1 more: 5.
Worked exampleHow many positive factors does 16 have?
AnswerC — 5
Step-by-step- List them in pairs: 1, 2, 4, 8, 16.
- That is 5 factors.
Quick check5 = number of factor pairs (3) doubled minus one (a square).
Common mistakes- A (1): counted only the prime factors
- B (3): counted factor pairs, not factors
- D (6): counted one factor twice
Primes — count the primes
Method. Cross out the evens and the multiples of 3, 5 and 7; what is left in the range are the primes.
Worked exampleHow many prime numbers are there from 50 to 60, including 50 and 60?
AnswerB — 2
Step-by-step- List the primes in the range: 53, 59.
- That is 2 primes.
Quick checkEach listed number has no factor of 2, 3, 5 or 7 (except itself).
Common mistakes- A (1): left out a prime
- C (3): counted a composite number as prime
- D (5): counted every odd number as prime
04.02 Fractions, Decimals and Percents
The Lower Level ISEE has a 30-question Mathematics Achievement section in 30 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers fractions, decimals and simple percents: equivalence, comparing and ordering, and the four operations.
Fractions
A fraction names equal parts of a whole: the bottom number tells how many equal parts the whole has, and the top number tells how many parts are taken. Multiply or divide the top and bottom by the same number to get an equal fraction. When the bottom numbers are the same, add or subtract only the top numbers.
Key formulas| Parts of a fraction | equal parts in the wholeparts taken |
| Equivalent fractions | 43=4×23×2=86 |
| Simplest form | 64=6÷24÷2=32 |
| Same bottom number | 71+72=73,53−51=52 |
| Compare | 85>83 (same bottom),31>51 (same top: bigger parts) |
| Mixed number | 143=44+43=47 |
| Fraction of a number | 32 of 18=(18÷3)×2=12 |
| Whole number times a fraction | 4×21=24=2 |
Fractions on a number line
Method. Count the spaces between 0 and 1 for the bottom number (3), then count spaces from 0 to P for the top number (1).
Worked exampleOn the number line, what fraction does point P show?

AnswerA — 31
Step-by-step- The distance from 0 to 1 is cut into 3 equal spaces.
- So each space is 31.
- Point P is 1 space to the right of 0.
- So P shows 31.
Quick checkP is 2 spaces short of 1, and 31 + 32 = 1.
Common mistakes- B (42): counted tick marks (including the one at 0) instead of spaces
- C (32): counted the spaces back from 1
- D (3): flipped the fraction
Equivalent fractions — missing number
Method. Find what the known part was multiplied by, then multiply the other part by the same number.
Worked exampleWhat number makes 41 = 2/■ true?
AnswerD — 8
Step-by-step- The top changes from 1 to 2.
- So it was multiplied by 2 ÷ 1 = 2.
- Multiply the bottom by the same number: 4 × 2 = 8.
- So 41 = 82.
Quick checkSimplify 82 by dividing top and bottom by 2: you get back 41.
Common mistakes- A (2): wrote the multiplier instead of the new bottom
- B (5): added the same amount to the bottom as to the top
- C (6): added the multiplier to the bottom
Equivalent fractions — choose
Method. Cross-multiply to test a choice: 5 × 12 = 60 and 6 × 10 = 60; equal products mean equal fractions.
Worked exampleWhich fraction is equivalent to 65?
AnswerA — 1210
Step-by-step- Equivalent fractions come from multiplying the top and the bottom by the same number.
- 5 × 2 = 10 and 6 × 2 = 12.
- So 65 = 1210.
Quick checkDivide 1210 by 2 on top and bottom: 65.
Common mistakes- B (87): added the same number to the top and the bottom
- C (810): multiplied the top but added to the bottom
- D (610): multiplied only the top
Simplest form
Method. Divide top and bottom by any common factor, and keep going until no common factor is left (here 3318 → … → 116).
Worked exampleWrite 3318 in simplest form.
AnswerC — 116
Step-by-step- The greatest common factor of 18 and 33 is 3.
- Divide the top and the bottom by 3: 18 ÷ 3 = 6 and 33 ÷ 3 = 11.
- So 3318 = 116, and 6 and 11 share no factor other than 1.
Quick check6 × 3 = 18 and 11 × 3 = 33, so 116 is equal to 3318.
Common mistakes- A (336): divided only the top
- B (216): subtracted the same amount from the top and the bottom
- D (611): flipped the fraction
Add — like denominators (word problem)
Method. Same-size parts: 4 + 1 = 5 parts of size 61.
Worked exampleA jug had 64 of a liter of juice. Jake poured in 61 of a liter more. How much juice is in the jug now?
A61 of a liter
B125 of a liter
C63 of a liter
D65 of a liter
AnswerD — 65 of a liter
Step-by-step- Putting the two amounts together means add.
- Both amounts are in 6ths.
- So add the tops and keep the bottom: 64 + 61 = 65.
Quick checkThe total must be more than each amount: 65 is greater than 64 and 61.
Common mistakes- A (61 of a liter): gave only the amount poured in, 61 of a liter
- B (125 of a liter): added the bottom numbers too: 125
- C (63 of a liter): subtracted instead of adding: 64 − 61 = 63
Fraction of a whole number (word problem)
Method. Divide by the bottom, multiply by the top: 10 ÷ 5 × 2 = 4.
Worked exampleA farmer has 10 chickens. 52 of them are brown. How many chickens are brown?
AnswerB — 4
Step-by-step- Find one part first: 10 ÷ 5 = 2.
- So 51 of 10 is 2.
- Then take 2 of those parts: 2 × 2 = 4.
Quick check4 is less than 10 because 52 is less than 1, and 4 × 5 = 2 × 10.
Common mistakes- A (2): found one part only (did not multiply by the top number)
- C (6): found the part that is left instead
- D (20): multiplied by the top number only
Compare fractions
Method. Compare each fraction with 21 and with 1 first; for close ones cross-multiply: ba > dc when a × d > b × c.
Worked exampleWhich fraction is the least?
AnswerB — 83
Step-by-step- Compare each fraction with 21: 76 and 43 are more than 21; 83 and 52 are less than 21.
- Compare 83 and 52 using fortieths: 83 = 4015 and 52 = 4016.
- 4015 < 4016, so the least fraction is 83.
Quick checkTurn 83 into a decimal: about 0.375; it is the least of the decimals.
Common mistakes- A (76): chose the greatest fraction instead of the least
- C (52): chose the fraction with the least top number
- D (43): chose the fraction with the least bottom number
Decimals and Money
The first place after the decimal point is tenths and the second is hundredths. Money uses hundredths: $3.25 means 3 dollars and 25 cents. Line up the decimal points to compare, add or subtract decimals. To round, look at the digit just to the right of the rounding place: 5 or more rounds up.
Key formulas| Place value | 54.91=50+4+109+1001 |
| Tenths and hundredths | 0.7=107,0.07=1007 |
| Same value | 0.5=0.50=21 |
| Compare | line up the points and compare from the left: 1.3>1.24 |
| Round to the nearest tenth | look at the hundredths digit: 3.47→3.5, 3.42→3.4 |
| Add or subtract | 6.4+5.3=11.7 (decimal points lined up) |
| Money | $1=100 cents,$3.25=3 dollars 25 cents |
| Making change | change=amount paid−cost |
Decimal place value — value of a digit
Method. Write 9, then put a zero in every place between it and the decimal point: 0.9.
Worked exampleIn 5.93, what is the value of the digit 9?
AnswerC — 0.9
Step-by-step- In 5.93 the digit 9 is 1 place to the right of the decimal point, which is the tenths place.
- Its value is 9 tenths = 0.9.
Quick check0.9 has its last digit in the tenths place, matching the position of 9 in 5.93.
Common mistakes- A (0.009): used the place two to the right
- B (0.09): used the place one to the right
- D (9): gave the digit itself, not its value
Decimals on a number line
Method. Find the size of one space (0.1), then count spaces from the left end.
Worked exampleOn the number line, what decimal does point P show?

AnswerA — 0.1
Step-by-step- From 0 to 1 there are 10 equal spaces.
- So each space is (1 − 0) ÷ 10 = 0.1.
- P is 1 space past 0: 0 + 1 × 0.1 = 0.1.
Quick checkP is 9 spaces before 1: 1 − 9 × 0.1 = 0.1.
Common mistakes- B (0.2): counted tick marks (including the first one) instead of spaces
- C (0.9): counted the spaces back from the right end
- D (1): read each space as ten times its size
Compare decimals
Method. Line the decimals up at the decimal point and compare place by place from the left; extra digits do not make a decimal larger.
Worked exampleWhich decimal is the least?
AnswerA — 1.09
Step-by-step- Write every decimal with the same number of decimal places by adding zeros: 1.8 = 1.800, 1.09 = 1.090, 1.677 = 1.677, 1.9 = 1.900.
- Now compare digit by digit from the left.
- The least is 1.09.
Quick checkAnnex zeros so all have 3 decimal places and compare them as whole numbers of thousandths.
Common mistakes- B (1.677): chose the decimal with the most digits after the point
- C (1.8): compared the digits after the point as whole numbers
- D (1.9): chose the greatest decimal instead of the least
Rounding decimals
Method. Underline the rounding place, look one digit to the right: 5–9 round up, 0–4 keep; drop everything after.
Worked exampleRound 50.47 to the nearest tenth.
AnswerD — 50.5
Step-by-step- The rounding digit is the tenths digit (first after the point).
- Look at the next digit to the right: it is 7, which is 5 or more.
- So round up.
- 50.47 rounds to 50.5.
Quick check50.5 is within half a tenth of 50.47: the difference is 0.03.
Common mistakes- A (50): rounded to the nearest whole number instead
- B (50.4): cut off the digits instead of rounding up
- C (50.47): rounded to the nearest hundredth instead
Add decimals
Method. Add the whole parts (26 + 15 = 41) and the decimal parts (0.71 + 0.1 = 0.81), then combine: 41.81.
Worked exampleWhat is 26.71 + 15.1?
AnswerD — 41.81
Step-by-step- Line up the decimal points and add zeros so both numbers have 2 decimal places: 26.71 + 15.10.
- Add place by place from the right, carrying as needed: 41.81.
Quick checkEstimate: about 27 + 15 = 42; 41.81 is close.
Common mistakes- A (4.181): put the decimal point one place too far left
- B (11.61): subtracted instead of adding
- C (28.22): lined up the last digits instead of the decimal points
Subtract decimals
Method. Count up from 1.1 to 8.7: the gap is 7.6.
Worked exampleWhat is 8.7 − 1.1?
AnswerC — 7.6
Step-by-step- Line up the decimal points.
- Subtract from the right, regrouping when the top digit is smaller: 8.7 − 1.1 = 7.6.
Quick checkAdd back: 7.6 + 1.1 = 8.7.
Common mistakes- A (0.76): put the decimal point one place too far left
- B (6.6): regrouped one time too many (took an extra 1 from the ones)
- D (9.8): added instead of subtracting
Decimals in money — making change
Method. Count up from $13.41: to the next dollar is $0.59, then $6 more to reach $20; total $6.59.
Worked exampleDev buys a book for $13.41 and pays with a $20 bill. How much change should Dev get?
A$6.59
B$7.41
C$13.41
D$33.41
AnswerA — $6.59
Step-by-step- Change = amount paid − price = $20.00 − $13.41.
- Line up the decimal points and regroup: $20.00 − $13.41 = $6.59.
Quick checkCheck by adding back: $13.41 + $6.59 = $20.00, the amount paid.
Common mistakes- B ($7.41): subtracted the dollars but added the cents
- C ($13.41): subtracted the smaller digit from the larger in each place instead of regrouping
- D ($33.41): added instead of subtracting
Percents
Percent means out of 100: 25% means 25 out of every 100. Many percents are easy fractions, such as 50% = 1/2 and 25% = 1/4. To find a percent of a number, change the percent to a fraction, then find that fraction of the number.
Key formulas| Percent means out of 100 | 37%=10037=0.37 |
| Easy percents | 50%=21, 25%=41, 75%=43, 10%=101 |
| Fraction to percent | 53=10060=60% |
| Percent to fraction | 40%=10040=52 |
| Percent of a number | 25% of 36=41 of 36=36÷4=9 |
| 10% of a number | 10% of 70=70÷10=7 |
| Sale price | 25% off $36: $36−$9=$27 |
| Find the whole | 25% is 15 ⇒ 100% is 4×15=60 |
Fraction to percent
Method. Scale the fraction to a denominator of 100 if you can: 41 = 10025 = 25%.
Worked exampleWrite 41 as a percent.
AnswerC — 25%
Step-by-step- Divide to get a decimal.
- Then multiply by 100: 1 ÷ 4 = 0.25, and 0.25 × 100 = 25%.
Quick check25% of 4 is 1, which equals the top number 1.
Common mistakes- A (0.25%): wrote the decimal as the percent (did not multiply by 100)
- B (1.4%): put a decimal point between the top and bottom numbers
- D (75%): used the other part (100% minus the answer)
Percent to fraction (simplest form)
Method. Write the percent over 100, clear any decimal, then simplify.
Worked exampleWrite 15% as a fraction in simplest form.
AnswerB — 203
Step-by-step- 15% = 10015.
- This simplifies to 203.
Quick checkCheck by dividing: 203 = 3 ÷ 20 = 0.15 = 15%.
Common mistakes- A (2003): used 1,000 as the bottom number instead of 100
- C (2017): used the other part (100%−15%=85%=2017)
- D (23): used 10 as the bottom number instead of 100
Percent of a number
Method. 10% of 45 is 4.5; double it to get 20%: 9.
Worked exampleWhat is 20% of 45?
AnswerA — 9
Step-by-step- 20% means 20 out of 100, which is 51.
- 51 of 45 = 45 ÷ 5 = 9.
Quick check5 × 9 = 45, so 9 is one-fifth (20%) of 45 ✓
Common mistakes- B (36): found the amount left after taking 20%: 45 − 9 = 36
- C (65): added the percent to the number: 45 + 20 = 65
- D (90): multiplied 45 by 2 instead of by 0.2: 90
04.03 Algebra
The Lower Level ISEE has a 30-question Mathematics Achievement section in 30 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers early algebra: number patterns, input–output rules, and simple equations with one unknown.
Input and Output Rules
A rule changes every input into an output in the same way. Do the steps of the rule in order. To find a rule, see how the outputs change when the inputs go up by 1, then check the rule on every pair.
Key formulas| Use a rule | multiply by 8, then add 4: 6→6×8+4=52 |
| Growing pattern | 5, 10, 15, 20, … (add 5 each time) |
| Find the rule | 5→32, 6→37: up 5 for each 1, so multiply by 5, then add 7 |
| Check | the rule must work for every input and output pair |
Input–output rules
Method. Do the steps in the order written: multiply first, then add or subtract.
Worked exampleA function machine uses the rule “Multiply by 5, then add 8.” What is the output when the input is 7?
AnswerB — 43
Step-by-step- Follow the rule in order.
- Multiply: 7 × 5 = 35.
- Then add 8: 35 + 8 = 43.
Quick checkundo it — (43 − 8) ÷ 5 = 7, the input ✓.
Common mistakes- A (35): only multiplied
- C (61): multiplied by 8 and added 5
- D (75): did the operations in the wrong order
Input–output tables
Method. Find how much the output grows per 1 input (the multiplier), then fix the starting amount.
Worked exampleIn the table, every output comes from its input by the same rule. Input: 1, 2, 3, 4. Output: 3, 6, 9, 12. What is the output when the input is 7?
AnswerC — 21
Step-by-step- Each time the input goes up by 1, the output goes up by 3.
- So the rule multiplies by 3.
- Input 1 gives 3 = 3 × 1.
- So the rule is: multiply by 3.
- For input 7: 3 × 7 = 21.
Quick checkthe rule gives 3, 6, 9, 12 for inputs 1, 2, 3, 4, matching the table ✓.
Common mistakes- A (10): added instead of multiplying
- B (15): found only the next output
- D (33): added the step to the last output once for each unit of the input
Finding the rule
Method. Test each choice on ALL pairs, not just the first one.
Worked exampleWhich rule turns each input into its output? Input: 5, 9, 10. Output: 27, 47, 52.
AMultiply by 4, then add 7
BAdd 20
CAdd 2, then multiply by 5
DMultiply by 5, then add 2
AnswerD — Multiply by 5, then add 2
Step-by-step- Test the rule on every pair.
- 5 → 5 × 5 + 2 = 27.
- 9 → 9 × 5 + 2 = 47.
- 10 → 10 × 5 + 2 = 52.
- All three pairs match.
Quick checkthe input 10 gives 10 × 5 + 2 = 52, the last output ✓.
Common mistakes- A (Multiply by 4, then add 7): checked only the first pair
- B (Add 20): used the change in the outputs as the rule
- C (Add 2, then multiply by 5): did the operations in the wrong order
04.04 Geometry and Measurement
The Lower Level ISEE has a 30-question Mathematics Achievement section in 30 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers geometry and measurement: lines and angles, triangles, perimeter and area, circles (radius and diameter), solid shapes and volume, points on a grid, and units of length, weight, capacity, time and money.
Lines and Angles
Angles are measured in degrees. A right angle is 90°, like the corner of a square. An acute angle is less than 90°, an obtuse angle is between 90° and 180°, and a straight angle is 180°. A full turn is 360°.
Key formulas| Acute angle | less than 90∘ |
| Right angle | 90∘ |
| Obtuse angle | more than 90∘ and less than 180∘ |
| Straight angle | 180∘ |
| Turns | 41 turn=90∘, 21 turn=180∘, full turn=360∘ |
| Clock face | from one hour mark to the next=360∘÷12=30∘ |
| Lines | parallel lines never meet; perpendicular lines meet at a right angle |
Angles on a clock
Method. Each hour mark is 30°; the hour hand also moves 0.5° per minute.
Worked exampleWhat is the smaller angle between the hour hand and the minute hand of a clock at 6:00?
AnswerD — 180°
Step-by-step- The 12 hour marks split 360° into 12 parts of 30°.
- At 6:00 the hands are 6 hour marks apart.
- So the smaller angle is 6 × 30° = 180°.
Quick check12 × 30° = 360° ✓, and 6 marks give 180°.
Common mistakes- A (36°): used 6° per hour (the minute-hand rate)
- B (90°): used 15° per hour mark
- C (150°): counted one hour mark too few
Triangles
Name a triangle by its sides or by its angles. By sides it is equilateral, isosceles or scalene; by angles it is acute, right or obtuse. The three angles of every triangle add up to 180°.
Key formulas| Equilateral | all 3 sides the same length |
| Isosceles | at least 2 sides the same length |
| Scalene | no two sides the same length |
| Acute triangle | all 3 angles less than 90∘ |
| Right triangle | one angle is 90∘ |
| Obtuse triangle | one angle is more than 90∘ |
| Angle sum | the 3 angles add to 180∘: 90∘+60∘+30∘=180∘ |
Classifying triangles by sides
Method. Count how many side lengths are equal.
Worked exampleA triangle has sides of length 10, 13, 8. Which word best describes it?
Aequilateral
Bisosceles
Cscalene
Dnot a triangle
AnswerC — scalene
Step-by-step- Equilateral triangles have 3 equal sides, isosceles triangles have 2 equal sides, and scalene triangles have no equal sides.
- The sides form a triangle because 8 + 10 > 13.
- Here no two sides are equal.
- So the triangle is scalene.
Quick checkthe three lengths 10, 13, 8 are all different ✓.
Common mistakes- A (equilateral): thought a triangle with sides 10, 13, 8 is equilateral
- B (isosceles): thought a triangle with sides 10, 13, 8 is isosceles
- D (not a triangle): thought the sides cannot form a triangle
Classifying triangles by angles
Method. Look only at the largest angle.
Worked exampleA triangle has angles of 90°, 39°, 51°. What kind of triangle is it?
Aright triangle
Bacute triangle
Cobtuse triangle
Dequiangular triangle
AnswerA — right triangle
Step-by-step- A triangle is right if one angle is 90°, obtuse if one angle is more than 90°, and acute if all three angles are less than 90°.
- The largest angle is 90°.
- So it is a right triangle.
Quick check90 + 39 + 51 = 180, and the largest angle is 90° ✓.
Common mistakes- B (acute triangle): thought a triangle with angles 90°, 39°, 51° is acute
- C (obtuse triangle): thought a triangle with angles 90°, 39°, 51° is obtuse
- D (equiangular triangle): thought a triangle with angles 90°, 39°, 51° is equiangular
Angle sum of a triangle
Method. Third angle = 180° − (sum of the other two).
Worked exampleTwo angles of a triangle measure 30° and 56°. What is the measure of the third angle, in degrees?
AnswerC — 94
Step-by-step- The angles of a triangle add to 180°.
- So the third angle is 180° − 30° − 56° = 94°.
Quick check30 + 56 + 94 = 180 ✓.
Common mistakes- A (26): subtracted the two angles
- B (86): added the two angles
- D (274): used 360° for the angle sum
Perimeter and Area
Perimeter is the distance around a shape: add the lengths of all its sides. Area is the number of unit squares that cover a shape; for a rectangle, multiply the length by the width. Area is measured in square units.
Key formulas| Perimeter | add the lengths of all the sides |
| Rectangle | P=length+width+length+width,A=length×width |
| Square | P=4×side,A=side×side |
| Shape made of rectangles | split it into rectangles and add their areas |
| Units | sides in meters: perimeter in meters, area in square meters |
Area of rectangles and squares
Method. Square: perimeter = 4 × side; area = side × side.
Worked exampleA square has a perimeter of 40 feet. What is its area, in square feet?
AnswerB — 100
Step-by-step- Each side is 40 ÷ 4 = 10 feet.
- The area is 10 × 10 = 100 square feet.
Quick checka side of 10 gives P = 40 and A = 100 ✓.
Common mistakes- A (40): gave the perimeter
- C (400): divided the perimeter by 2 to get the side
- D (1600): squared the perimeter
Perimeter of rectangles and squares
Method. Square: perimeter = 4 × side.
Worked exampleA square has sides of 11 meters. What is its perimeter, in meters?
AnswerC — 44
Step-by-step- A square has 4 equal sides.
- So P = 4 × 11 = 44 meters.
Quick check44 ÷ 4 = 11, the side length ✓.
Common mistakes- A (15): added 4 instead of multiplying: 11 + 4 = 15
- B (22): added only two sides: 11 + 11 = 22
- D (121): found the area instead: 11 × 11 = 121
Solid Shapes and Volume
Volume is the number of unit cubes that fill a solid. Count the cubes in one layer, then multiply by the number of layers. Remember the hidden cubes that hold up the ones you can see. For a box, multiply length × width × height.
Key formulas| Count by layers | cubes in one layer×number of layers |
| Example | (3×2) cubes in a layer×2 layers=12 cubes |
| Box | V=length×width×height: 4×3×2=24 cubic units |
| Cube | 6 faces, 12 edges, 8 vertices |
| Units | volume is counted in cubic units |
Volume by counting cubes
Method. Cubes in one layer × number of layers.
Worked exampleThe solid shown is built from unit cubes with no gaps. How many unit cubes does it contain?

AnswerA — 48
Step-by-step- Each layer is 3 by 4.
- So it has 3 × 4 = 12 cubes.
- There are 4 layers.
- So the solid has 12 × 4 = 48 cubes.
Quick check3 × 4 × 4 = 48, the same count ✓.
Common mistakes- B (60): counted one layer too many
- C (80): counted the square faces on the outside
- D (100): counted the corner points instead of the cubes
Volume of rectangular prisms
Method. V = l × w × h; to find a missing edge, divide V by the other two.
Worked exampleA rectangular box is 4 centimeters long, 10 centimeters wide and 2 centimeters high. What is its volume, in cubic centimeters?
AnswerD — 80
Step-by-step- Volume = length × width × height.
- So V = 4 × 10 × 2 = 80 cubic centimeters.
Quick check80 ÷ (4 × 10) = 2, the height ✓.
Common mistakes- A (16): added the three dimensions
- B (40): found only the area of the base
- C (42): added the height instead of multiplying
Measurement, Time and Money
To change a bigger unit to a smaller unit, multiply; to change a smaller unit to a bigger unit, divide. When you add lengths or times, regroup 12 inches as 1 foot and 60 minutes as 1 hour.
Key formulas| Length (US) | 12 in=1 ft,3 ft=1 yd |
| Length (metric) | 100 cm=1 m,1000 m=1 km |
| Weight | 16 oz=1 lb,1000 g=1 kg |
| Capacity (US) | 2 cups=1 pint, 2 pints=1 quart, 4 quarts=1 gallon |
| Capacity (metric) | 1000 mL=1 L |
| Time | 60 s=1 min, 60 min=1 h, 24 h=1 day, 7 days=1 week |
| Bigger unit to smaller unit | 7 km=7×1000=7000 m |
| Regroup | 9 ft 2 in+7 ft 11 in=16 ft 13 in=17 ft 1 in |
| Money | $1=100 cents;change=amount paid−cost |
Money
Method. Quarter 25¢, dime 10¢, nickel 5¢, penny 1¢.
Worked exampleSam has 5 quarters, 6 dimes and 2 pennies. How much money does Sam have?
AnswerD — $1.87
Step-by-step- Find the value of each kind of coin.
- 5 × 25¢ = 125¢.
- 6 × 10¢ = 60¢.
- 2 × 1¢ = 2¢.
- Total = 187¢ = $1.87.
Quick check125 + 60 + 2 = 187 cents ✓.
Common mistakes- A ($0.13): counted every coin as one cent
- B ($1.57): mixed up the values of dimes and nickels
- C ($1.85): left out the pennies
Converting units
Method. Big unit → small unit: multiply. Small → big: divide.
Worked exampleHow many meters are equal to 1100 centimeters?
AnswerA — 11
Step-by-step- There are 100 centimeters in 1 meter.
- So 1100 centimeters = 1100 ÷ 100 = 11 meters.
Quick check11 × 100 = 1100, the original amount ✓.
Common mistakes- B (110): used 10 centimeters in one meter
- C (1000): subtracted instead of dividing
- D (110000): multiplied instead of dividing
Elapsed time
Method. Add minutes first; every 60 minutes becomes 1 hour.
Worked exampleA class starts at 4:45 and lasts 20 min. At what time does it end?
AnswerB — 5:05
Step-by-step- Add the minutes: 45 + 20 = 65 minutes, which is 1 hour and 5 minutes.
- Add the hours: 4 + 0 + 1 = 5.
- So the class ends at 5:05.
Quick checkfrom 4:45 to 5:05 is 20 min ✓.
Common mistakes- A (4:05): added the minutes but forgot to carry the extra hour: 4:05
- C (5:45): added 1 hour instead of 20 minutes: 5:45
- D (6:05): carried one hour too many: 6:05
Adding measurements
Method. Regroup every 12 in as 1 ft.
Worked exampleAdd 4 ft 9 in and 1 ft 6 in.
A3 ft 3 in
B5 ft 3 in
C6 ft 3 in
D6 ft 15 in
AnswerC — 6 ft 3 in
Step-by-step- Add the smaller units: 9 + 6 = 15 in, which is 1 ft 3 in because 1 ft = 12 in.
- Add the larger units: 4 + 1 + 1 = 6 ft.
- So the sum is 6 ft 3 in.
Quick checkin in, 57 + 18 = 75, and 6 × 12 + 3 = 75 ✓.
Common mistakes- A (3 ft 3 in): subtracts instead of adding: 4 ft 9 in − 1 ft 6 in = 3 ft 3 in
- B (5 ft 3 in): changes 15 in to 1 ft 3 in but forgets to add the extra foot: 5 ft 3 in
- D (6 ft 15 in): adds the extra foot but keeps all 15 inches: 6 ft 15 in
04.05 Data Analysis and Probability
The Lower Level ISEE has a 30-question Mathematics Achievement section in 30 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers data and probability: reading tables and graphs, mean, median, mode and range, and simple probability.
Mean, Median, Mode and Range
The mean is the sum of the values divided by how many values there are. The median is the middle value after you put the values in order. The mode is the value that appears most often. The range is the greatest value minus the least value.
Key formulas| Mean | mean=sum of the values÷number of values |
| Median | the middle value when the values are in order |
| Two middle values | the median is halfway between them: 4, 6, 8, 10→7 |
| Mode | the value that appears most often |
| Range | greatest value−least value |
| Example: mean | 2, 5, 5, 8, 10: sum 30, mean 30÷5=6 |
| Example: the others | 2, 5, 5, 8, 10: median 5, mode 5, range 10−2=8 |
Range
Method. Range = max − min; the order of the list does not matter.
Worked exampleWhat is the range of the data set 30, 24, 8, 49, 17, 47?
AnswerC — 41
Step-by-step- The range is greatest value − least value.
- The greatest value is 49 and the least is 8.
- So the range is 49 − 8 = 41.
Quick check8 + 41 = 49, the greatest value ✓.
Common mistakes- A (17): subtracted the first and last values as listed
- B (32): used the second-least value
- D (49): gave the greatest value
Mean
Method. Mean = sum of the values ÷ how many values there are.
Worked exampleWhat is the mean of 6, 7, 2?
AnswerA — 5
Step-by-step- Add the values.
- So 6 + 7 + 2 = 15.
- Divide by the number of values, 3.
- So the mean is 15 ÷ 3 = 5.
Quick check5 × 3 = 15, the sum of the values ✓.
Common mistakes- B (6): gave the median
- C (7.5): divided by one less than the count
- D (15): found the sum but did not divide
Graphs and Tables
Read the title, the labels and the key before you read any values. In a pictograph, multiply the number of symbols by what one symbol stands for. In a bar graph, read across from the top of each bar to the scale.
Key formulas| Pictograph | number of symbols×value of one symbol |
| Half a symbol | half the value of one symbol |
| Bar graph | read across from the top of the bar to the scale |
| Line plot | each X stands for one item |
| Total | add the values of all the groups |
| How many more | greater value−lesser value |
Pictographs
Method. Count the symbols first, then multiply once by the key.
Worked exampleThe pictograph shows favorite fruit. Each symbol stands for 5 students. How many students are shown for Oranges?

AnswerD — 25
Step-by-step- Count the symbols for Oranges, which gives 5.
- Multiply by the key.
- So 5 × 5 = 25.
Quick check25 ÷ 5 = 5 symbols, matching the row for Oranges ✓.
Common mistakes- A (5): counted the symbols without using the key
- B (15): read the row for Apples
- C (20): missed one symbol
Bar graphs
Method. Read both bars on the scale, then subtract.
Worked exampleThe bar graph shows books read. How many more books are shown for Monday than for Tuesday?

AnswerB — 20
Step-by-step- Read the bars.
- So Monday = 25 and Tuesday = 5.
- Subtract to get 25 − 5 = 20.
Quick check5 + 20 = 25, the value for Monday ✓.
Common mistakes- A (5): gave the value for Tuesday only
- C (25): gave the value for Monday only
- D (30): added instead of subtracting
Line plots and dot plots
Method. Count the X's at 1 and to its right.
Worked exampleThe line plot shows the number of goals a team scored in some games. Each X stands for one game. In how many games did the team score at least 1 goal?

AnswerD — 20
Step-by-step- At least 1 means 1 or more.
- Add the X's in the columns 1 through 5.
- So 4 + 5 + 5 + 4 + 2 = 20.
Quick checkthe X's below 1 number 5, and 5 + 20 = 25 in all ✓.
Common mistakes- A (4): counted only the column for 1
- B (5): counted the wrong side
- C (16): used more than 1 instead of at least 1
Chance and Likelihood
Chance tells how likely something is to happen. Compare the number of objects of one kind with the total number of objects: if none are that kind it is impossible, and if all are that kind it is certain. The chance can be written as a fraction: the number of that kind over the total number.
Key formulas| Impossible | none of the objects are that kind |
| Certain | all of the objects are that kind |
| Likely | more than half of the objects are that kind |
| Unlikely | fewer than half of the objects are that kind |
| Equally likely | the same number of each kind |
| Chance as a fraction | total numbernumber of that kind |
| Example | 3 red of 8 marbles⇒83 |
Simple probability
Method. Probability = marbles of that color ÷ all marbles.
Worked exampleA bag has 5 red marbles, 2 blue marbles, and 1 green marble. One marble is picked at random. What is the probability that it is green?
AnswerA — 81
Step-by-step- There are 5 + 2 + 1 = 8 marbles in all, and 1 is green.
- So the probability is 81.
Quick checkthe probabilities of all 3 colors add to 88 = 1 ✓.
Common mistakes- B (71): divided by the other marbles only
- C (31): treated each color as equally likely
- D (87): found the probability of not green