ISEE Middle Level · Mathematics · Unit 04 Mathematics Achievement

Mathematics Achievement: Unit Study Guide

04.01 Numbers and Operations

The Middle Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers numbers and operations: integers and the number line, absolute value, order of operations, the coordinate grid, factors, multiples and primes, divisibility, exponents and square roots.

Integers, the Number Line and the Coordinate Grid

Integers are the whole numbers and their opposites. Numbers to the right on a number line are greater. Learn the sign rules, use absolute value as distance from 0, follow the order of operations, and know the odd and even rules. A point on the coordinate grid is written (x, y): across first, then up or down.

Key formulas
Add with the same sign
Add with different signs
Subtract
Multiply or divide
Absolute value
Distance on a number line
Order of operations
Odd and even
Distributive
Point on a grid

Odd and even — parity rules

Method. Test with small numbers: a = 1, b = 1 gives a + b = 2, which is even; check one more pair to be sure.

Worked example
If a is an odd whole number and b is an odd whole number, which expression must be even?
Aa + 2
Ba × a
Ca + b
Da + b + 1
AnswerC — a + b
Step-by-step
  1. Use the rules: even ± even = even, odd ± odd = even, odd ± even = odd.
  2. Even × anything = even, odd × odd = odd.
  3. Here a is odd and b is odd.
  4. So a + b is always even.
Quick checkWith a = 3 and b = 3: a + b = 6, also even.
Common mistakes
  • A (a + 2): chose an expression that is always odd
  • B (a × a): chose an expression that is always odd
  • D (a + b + 1): chose an expression that is always odd

Add integers

Method. On a number line, start at −24 and move 2 to the left: you land on −26.

Worked example
What is −24 + (−2)?
A−26
B−22
C26
D48
AnswerA — −26
Step-by-step
  1. The signs are the same.
  2. So add the sizes (24 + 2 = 26) and keep the sign: −26.
Quick checkCheck by subtracting: −26 − (−2) = −24, the first number.
Common mistakes
  • B (−22): subtracted instead of adding
  • C (26): gave the opposite sign
  • D (48): multiplied instead of adding

Subtract integers

Method. Keep – change – change: keep the first number, change − to +, change the sign of the second number.

Worked example
What is −20 − 15?
A−35
B−5
C5
D35
AnswerA — −35
Step-by-step
  1. Subtracting a number is the same as adding its opposite: −20 − 15 = −20 + (−15).
  2. Then add: −35.
Quick checkCheck by adding back: −35 + 15 = −20, the first number.
Common mistakes
  • B (−5): added instead of subtracting (did not change the sign of the second number)
  • C (5): ignored the signs and subtracted the sizes
  • D (35): gave the opposite sign

Divide integers

Method. Find the size first, then the sign: an even number of negative signs gives +, an odd number gives −.

Worked example
What is 133 ÷ (−7)?
A−19
B19
C126
D140
AnswerA — −19
Step-by-step
  1. Divide the sizes: 133 ÷ 7 = 19.
  2. Different signs give a negative quotient.
  3. So the answer is −19.
Quick checkCheck by multiplying back: −19 × (−7) = 133, the number divided.
Common mistakes
  • B (19): used the wrong sign rule
  • C (126): added instead of dividing
  • D (140): subtracted instead of dividing

Multiply integers

Method. Find the size first, then the sign: an even number of negative signs gives +, an odd number gives −.

Worked example
What is −4 × 9?
A−36
B5
C13
D36
AnswerA — −36
Step-by-step
  1. Multiply the sizes: 4 × 9 = 36.
  2. A negative times a positive is negative.
  3. So the product is −36.
Quick checkCheck by dividing back: −36 ÷ 9 = −4, the first factor.
Common mistakes
  • B (5): added instead of multiplying
  • C (13): ignored the signs and added
  • D (36): used the wrong sign rule

Absolute value — distance on a number line

Method. Points on opposite sides of 0: add their distances from 0: 30.

Worked example
What is the distance between −22 and 8 on a number line?
A14
B30
C31
D176
AnswerB — 30
Step-by-step
  1. Distance is the absolute value of the difference.
  2. |−22 − 8| = |−30|.
  3. So |−22 − 8| = 30.
Quick checkCount from the smaller number −22 up to 8: 30 units.
Common mistakes
  • A (14): subtracted the sizes, ignoring that the points are on opposite sides of 0
  • C (31): counted the tick marks instead of the spaces between the numbers
  • D (176): multiplied the sizes

Absolute value — evaluate

Method. Absolute value is never negative: simplify inside, drop the sign, then do the outside operation.

Worked example
What is |−4| − |3 − 7|?
A−8
B0
C8
D16
AnswerB — 0
Step-by-step
  1. Work inside the bars first: |−4| = 4 and |3 − 7| = |−4| = 4.
  2. Then 4 − 4 = 0.
Quick checkCheck by adding back: 0 + 4 = 4, which is |−4|.
Common mistakes
  • A (−8): treated |−4| as −4
  • C (8): treated |3 − 7| as −4
  • D (16): multiplied instead of subtracting

Integers in context — temperature

Method. Start at −8 on a number line and move 10 up.

Worked example
At 6 a.m. the temperature was −8°F. By noon it had risen 10°F. What was the temperature at noon, in °F?
A−18
B−8
C−2
D2
AnswerD — 2
Step-by-step
  1. Rising means add.
  2. −8 + 10 = 2°F.
Quick checkUndo the change to check: 2 − 10 = −8, the starting temperature.
Common mistakes
  • A (−18): moved the wrong way on the number line
  • B (−8): gave the starting temperature
  • C (−2): gave the opposite sign

Order rational numbers

Method. Negatives are less than 0 and positives greater; among negatives, the one farther from 0 is less.

Worked example
Which number is the least?
A−7
B−3
C
D0.63
AnswerA — −7
Step-by-step
  1. Write the fractions as decimals: = 0.2.
  2. From left to right on a number line: −7, −3, , 0.63.
  3. The least is −7.
Quick check−7 is to the left of every other choice on the number line.
Common mistakes
  • B (−3): chose the negative number closest to 0 (thought it was the smallest)
  • C (): chose the number closest to 0
  • D (0.63): chose the greatest number instead of the least

Coordinate plane — read a point

Method. Run before you rise: read across (x) first, then up or down (y).

Worked example
The figure shows point P in the coordinate plane. What are the coordinates of point P?
Figure for the worked example
A(−5, −2)
B(−2, −5)
C(2, −5)
D(−2, 5)
AnswerB — (−2, −5)
Step-by-step
  1. Start at the origin.
  2. P is 2 units left (x = −2) and 5 units down (y = −5).
  3. So P = (−2, −5).
Quick checkP is in Quadrant III, which matches the signs of (−2, −5).
Common mistakes
  • A ((−5, −2)): swapped the x- and y-coordinates
  • C ((2, −5)): used the wrong sign for x
  • D ((−2, 5)): used the wrong sign for y

Coordinate plane — distance on a grid line

Method. Opposite signs → add the sizes: 2 + 9 = 11.

Worked example
What is the distance between the points (−3, 2) and (−3, −9)?
A−11
B7
C11
D14
AnswerC — 11
Step-by-step
  1. The x-coordinates are equal.
  2. So the points lie on a vertical line.
  3. The distance is the absolute value of the difference of the other coordinates: |2 − (−9)| = 11.
Quick checkCount from −9 to 2: 11 units.
Common mistakes
  • A (−11): gave a negative distance
  • B (7): subtracted the sizes, ignoring that the points are on opposite sides of an axis
  • D (14): added the coordinate that stays the same

Integer expression — order of operations

Method. Find both products with their signs, then change the subtraction to adding the opposite: −24 + 36 = 12.

Worked example
What is 6 × (−4) − (−9) × 4?
A−60
B−12
C12
D60
AnswerC — 12
Step-by-step
  1. Multiply first: 6 × (−4) = −24 and (−9) × 4 = −36.
  2. Then subtract: −24 − (−36) = 12.
Quick checkCheck by adding back: 12 + (−36) = −24, the first product.
Common mistakes
  • A (−60): got the sign of the second product wrong
  • B (−12): gave the opposite sign
  • D (60): got the sign of the first product wrong

Evaluate an expression with a negative number

Method. Put every negative value in parentheses before squaring or multiplying.

Worked example
If x = −4, what is the value of − x?
A−20
B−12
C12
D20
AnswerD — 20
Step-by-step
  1. Substitute with parentheses.
  2. − 1 × (−4) = 16 − (−4).
  3. − 1 × (−4) = 16 + 4.
  4. So − 1 × (−4) = 20.
Quick check is positive (16) and −1x is positive (4); their sum is 20.
Common mistakes
  • A (−20): made both terms the wrong sign
  • B (−12): computed as a negative number
  • C (12): used x as positive in the second term

Factors, Multiples and Primes

A prime has exactly two factors, 1 and itself; 1 is not prime and 2 is the only even prime. Break numbers into primes to find the greatest common factor (shared primes) and the least common multiple (every prime to its highest power). Divisibility rules save time.

Key formulas
Prime factorization
GCF
LCM
GCF × LCM
Number of factors
Divisible by 2, 5 or 10
Divisible by 3 or 9
Divisible by 4
Divisible by 8

Primes — which is prime

Method. Test the small primes 2, 3, 5, 7 only (any composite below 100 has one of them as a factor): digit sum for 3, last digit for 2 and 5, and 7 by trial.

Worked example
Which of these numbers is prime?
A9
B17
C21
D27
AnswerB — 17
Step-by-step
  1. A prime has exactly two factors, 1 and itself.
  2. 17 has no factor other than 1 and 17.
  3. 27 = 3 × 9.
  4. 9 = 3 × 3.
  5. 21 = 3 × 7.
Quick checkCheck 17 ÷ 2, 3, 5, 7: none divides evenly.
Common mistakes
  • A (9): overlooked that 9 = 3 × 3
  • C (21): overlooked that 21 = 3 × 7
  • D (27): overlooked that 27 = 3 × 9

Factors — list all factors

Method. Find factor pairs from 1 upward and stop when the pairs meet at about .

Worked example
Which list shows all of the factors of 100?
A1, 2, 5, 100
B1, 2, 4, 5, 10, 20, 25, 50, 100
C1, 2, 4, 10, 20, 25, 50, 100
D1, 2, 4, 5, 6, 10, 20, 25, 50, 100
AnswerB — 1, 2, 4, 5, 10, 20, 25, 50, 100
Step-by-step
  1. Test each whole number from 1 up: factors come in pairs.
  2. The factor pairs of 100 are 1 × 100, 2 × 50, 4 × 25, 5 × 20, 10 × 10.
  3. All factors: 1, 2, 4, 5, 10, 20, 25, 50, 100.
Quick checkEach listed number divides 100 evenly, and the count 9 matches the pairs.
Common mistakes
  • A (1, 2, 5, 100): listed only the prime factors, 1 and the number
  • C (1, 2, 4, 10, 20, 25, 50, 100): left out the factor 5
  • D (1, 2, 4, 5, 6, 10, 20, 25, 50, 100): included 6, which is not a factor

Factors — how many factors

Method. Write the prime factorization, add 1 to each exponent, and multiply: (6+1) = 7.

Worked example
How many positive factors does 64 have?
A1
B4
C5
D7
AnswerD — 7
Step-by-step
  1. List them in pairs: 1, 2, 4, 8, 16, 32, 64.
  2. That is 7 factors.
Quick check7 = number of factor pairs (4) doubled minus one (a square).
Common mistakes
  • A (1): counted only the prime factors
  • B (4): counted factor pairs, not factors
  • C (5): left out 1 and the number itself

Multiples — least multiple above

Method. Divide 200 by 13, take the whole part, add 1, and multiply back: 13 × 16 = 208.

Worked example
What is the least multiple of 13 that is greater than 200?
A195
B208
C213
D221
AnswerB — 208
Step-by-step
  1. 200 ÷ 13 = 15 remainder 5.
  2. So 13 × 15 = 195 is below 200.
  3. The next multiple is 13 × 16 = 208.
Quick check208 ÷ 13 = 16 exactly, 208 > 200, and 208 − 13 = 195 < 200 ✓
Common mistakes
  • A (195): gave the multiple just below 200
  • C (213): added 13 to 200 instead of finding a multiple
  • D (221): went one multiple too far: 13 × 17 = 221

Divisibility — which number is divisible

Method. Rule for 4: last two digits divisible by 4.

Worked example
Which number is divisible by 4?
A3,272
B3,334
C6,038
D6,234
AnswerA — 3,272
Step-by-step
  1. Use the divisibility rule for 4 (last two digits divisible by 4).
  2. 3,272 passes.
  3. The others leave remainders.
Quick check3,272 ÷ 4 = 818.
Common mistakes
  • B (3,334): failed the 4-rule: remainder 2
  • C (6,038): failed the 4-rule: remainder 2
  • D (6,234): failed the 4-rule: remainder 2

Prime factorization — write it

Method. Use a factor tree or divide by 2, 3, 5, 7 in order, writing each prime as you go.

Worked example
What is the prime factorization of 126?
A6 × 3 × 7
B2 × ×
C2 × × 7
D2 × 3 × 7
AnswerC — 2 × × 7
Step-by-step
  1. Divide by primes until you reach 1: 126 ÷ 2 = 63, 63 ÷ 3 = 21, 21 ÷ 3 = 7, 7 ÷ 7 = 1.
  2. So 126 = 2 × × 7.
Quick checkMultiply back: 2 × × 7 = 126.
Common mistakes
  • A (6 × 3 × 7): used 6, which is not prime
  • B (2 × × ): used one factor of 7 too many
  • D (2 × 3 × 7): left out one copy of a repeated prime

GCF — two numbers

Method. Euclid: 132 mod 96 … repeat until the remainder is 0; the last divisor is 12. Or divide both by common primes until nothing common is left.

Worked example
What is the greatest common factor of 96 and 132?
A6
B12
C96
D1056
AnswerB — 12
Step-by-step
  1. 96 = × 3 and 132 = × 3 × 11.
  2. Take each common prime to the lower power: GCF = 12.
Quick check96 ÷ 12 = 8 and 132 ÷ 12 = 11 have no common factor.
Common mistakes
  • A (6): multiplied only the distinct common primes
  • C (96): chose the smaller number
  • D (1056): found the LCM instead

LCM — two numbers

Method. LCM = 6 × 4 ÷ GCF = 24 ÷ 2 = 12.

Worked example
What is the least common multiple of 6 and 4?
A2
B6
C12
D24
AnswerC — 12
Step-by-step
  1. 6 = 2 × 3 and 4 = .
  2. Take every prime at its higher power: LCM = 12.
Quick check12 ÷ 6 = 2 and 12 ÷ 4 = 3 are whole numbers.
Common mistakes
  • A (2): found the GCF instead
  • B (6): chose the larger number
  • D (24): multiplied the numbers

Distributive property — factor out the GCF

Method. Divide each term by the GCF 6: 12÷6 = 2, 30÷6 = 5.

Worked example
Which expression equals 12 + 30 when the greatest common factor is factored out?
A6(2 + 5)
B6(12 + 5)
C6(2 + 6)
D6(2 × 5)
AnswerA — 6(2 + 5)
Step-by-step
  1. GCF(12, 30) = 6.
  2. 12 = 6 × 2 and 30 = 6 × 5.
  3. So 12 + 30 = 6(2 + 5).
Quick checkDistribute: 6 × 2 + 6 × 5 = 12 + 30 = 42.
Common mistakes
  • B (6(12 + 5)): divided only 30 by the GCF 6 and left 12 unchanged
  • C (6(2 + 6)): divided 12 by 6 correctly but took 30 ÷ 6 as 6
  • D (6(2 × 5)): turned the sum inside the parentheses into a product

Primes — count the primes

Method. Cross out the evens and the multiples of 3, 5 and 7; what is left in the range are the primes.

Worked example
How many prime numbers are there from 30 to 60, including 30 and 60?
A6
B7
C8
D15
AnswerB — 7
Step-by-step
  1. List the primes in the range: 31, 37, 41, 43, 47, 53, 59.
  2. That is 7 primes.
Quick checkEach listed number has no factor of 2, 3, 5 or 7 (except itself).
Common mistakes
  • A (6): left out a prime
  • C (8): counted a composite number as prime
  • D (15): counted every odd number as prime

GCF/LCM — word problem

Method. Cancel common factors from 21 and 15 until nothing is common; the product of what you cancelled is 3.

Worked example
A teacher has 21 pencils and 15 erasers. She makes identical gift bags using all of them with none left over. What is the greatest number of bags she can make?
A1
B3
C36
D105
AnswerB — 3
Step-by-step
  1. The number of bags must divide both 21 and 15.
  2. The greatest such number is the GCF = 3.
Quick check21 ÷ 3 and 15 ÷ 3 are whole numbers.
Common mistakes
  • A (1): stopped at a common factor that is not the greatest
  • C (36): added the two numbers
  • D (105): found the LCM instead

Distributive property — factor the GCF from an expression

Method. Find GCF of the numbers only (20 and 12) since 12 has no x.

Worked example
Which is the expression 20x + 12 written with its greatest common factor factored out?
A2(10x + 6)
B4(5x + 3x)
C4(6x + 3)
D4(5x + 3)
AnswerD — 4(5x + 3)
Step-by-step
  1. GCF(20, 12) = 4.
  2. 20x ÷ 4 = 5x and 12 ÷ 4 = 3.
  3. So 20x + 12 = 4(5x + 3).
Quick checkDistribute: 4 × 5x + 4 × 3 = 20x + 12.
Common mistakes
  • A (2(10x + 6)): factored out 2, which is not the greatest common factor
  • B (4(5x + 3x)): kept the variable in the second term
  • C (4(6x + 3)): divided the first term incorrectly

Factors — count from prime factorization

Method. Exponent-plus-one rule: 4 × 3 = 12.

Worked example
How many positive factors does the number × have?
A5
B6
C10
D12
AnswerD — 12
Step-by-step
  1. Add 1 to each exponent and multiply.
  2. (3+1) × (2+1) = 12.
Quick checkThe number is 200, and listing its divisors gives 12.
Common mistakes
  • A (5): added the exponents
  • B (6): multiplied the exponents (forgot to add 1)
  • C (10): left out 1 and the number itself

Exponents and Square Roots

An exponent tells how many times to multiply a number by itself. A square root undoes squaring and a cube root undoes cubing. Learn the perfect squares up to 15² and the perfect cubes up to 5³ so you can estimate roots that are not whole numbers.

Key formulas
Exponent
Square root
Cube root
Estimate a root
Same base, multiply
Same base, divide
Power of a power
Zero exponent
Powers of 10

Estimate a square root

Method. List the perfect squares until you pass the number; the roots of the two squares around it are the answer.

Worked example
lies between which two consecutive whole numbers?
A1 and 2
B2 and 3
C3 and 4
D4 and 5
AnswerB — 2 and 3
Step-by-step
  1. Find the perfect squares on either side of 8: = 4 and = 9.
  2. Since 4 < 8 < 9, is between 2 and 3.
Quick check ≈ 2.83, which is between 2 and 3.
Common mistakes
  • A (1 and 2): picked the pair one step too low
  • C (3 and 4): picked the pair one step too high
  • D (4 and 5): divided by 2 instead of taking the square root

Square roots in context — side of a square

Method. Ask which number times itself is 100: 10.

Worked example
A square has an area of 100 square centimeters. How long is each side, in centimeters?
A10
B25
C50
D10,000
AnswerA — 10
Step-by-step
  1. Area of a square = side × side.
  2. The side is the square root of the area: = 10 cm.
Quick check10 × 10 = 100 square centimeters.
Common mistakes
  • B (25): divided the area by 4 (as if it were the perimeter)
  • C (50): divided the area by 2
  • D (10,000): squared the area

Evaluate squares in an expression

Method. Exponents come before addition; square each term, then add.

Worked example
What is + ?
A22
B65
C121
D784
AnswerB — 65
Step-by-step
  1. Square each number first: = 49 and = 16.
  2. Then add: 49 + 16 = 65.
Quick checkCheck by subtracting: 65 − 16 = 49, which is .
Common mistakes
  • A (22): multiplied each base by 2 instead of squaring
  • C (121): added the bases before squaring
  • D (784): multiplied the squares instead of adding

Zero exponent

Method. Replace every (nonzero)⁰ by 1 first.

Worked example
What is 6 · + ?
A2
B3
C8
D14
AnswerC — 8
Step-by-step
  1. Any nonzero number to the power 0 is 1.
  2. So 6 · = 6 · 1 = 6.
  3. Then = 2.
  4. Sum: 6 + 2 = 8.
Quick check = ÷ = 1, so the first term is 6.
Common mistakes
  • A (2): treated the zero power as 0
  • B (3): treated the coefficient times the zero power as just 1
  • D (14): treated the zero power as the base

Exponent laws — product rule

Method. Multiply numbers, add exponents of the same base.

Worked example
Which expression is equal to · ?
A
B2
C
D2
AnswerC —
Step-by-step
  1. Same base.
  2. So add the exponents: · = .
  3. Answer: .
Quick checkWrite it out: 2 factors of a times 6 factors of a is 8 factors of a.
Common mistakes
  • A (): multiplied the exponents instead of adding them
  • B (2): added the coefficients instead of multiplying them
  • D (2): added the coefficients and multiplied the exponents

Exponent laws — quotient rule

Method. Divide numbers, subtract exponents (top minus bottom).

Worked example
Which expression is equal to 6 ÷ 3? (Assume a ≠ 0.)
A2
B2
C3
D2
AnswerA — 2
Step-by-step
  1. Divide the coefficients: 6 ÷ 3 = 2.
  2. Same base.
  3. So subtract the exponents: 10 − 7 = 3.
  4. Answer: 2.
Quick checkMultiply back: 2 · 3 = 6.
Common mistakes
  • B (2): added the exponents
  • C (3): subtracted the coefficients instead of dividing
  • D (2): subtracted the exponents in the wrong order

Exponent laws — power rule

Method. Power of a power: multiply exponents; the coefficient is raised to the power too.

Worked example
Which expression is equal to ?
A32
B32
C2
D10
AnswerB — 32
Step-by-step
  1. Raise each factor to the power 5: = 32 and = (multiply the exponents).
  2. Answer: 32.
Quick check means 5 copies of 2 multiplied: that gives 6×5 = 30 factors of y.
Common mistakes
  • A (32): added the exponents instead of multiplying
  • C (2): did not raise the coefficient to the power
  • D (10): multiplied the coefficient by the exponent

Exponent laws — numerical

Method. Add the exponents first, then evaluate one power.

Worked example
What is · ?
A−
B
C
D10
AnswerC —
Step-by-step
  1. Same base.
  2. So add the exponents: −4 + 3 = −1.
  3. = .
Quick check = and = 1000; their product is .
Common mistakes
  • A (−): made the result negative
  • B (): multiplied the bases
  • D (10): used the opposite sign for the exponent

Negative exponents

Method. Flip the base, then make the exponent positive.

Worked example
What is ?
A−9
B
C
D9
AnswerB —
Step-by-step
  1. A negative exponent means the reciprocal.
  2. = 1 ÷ .
  3. So = .
Quick check × = 1, so is the reciprocal of .
Common mistakes
  • A (−9): made the answer negative instead of taking the reciprocal
  • C (): multiplied the base by the exponent in the denominator
  • D (9): ignored the negative sign in the exponent

04.02 Fractions, Decimals and Percents

The Middle Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers fractions, decimals and percents: equivalence, ordering, the four operations, and percent of a number.

Fractions

A fraction names equal parts of a whole. Use a common denominator to compare, add or subtract; multiply straight across; divide by multiplying by the reciprocal. Always simplify the answer.

Key formulas
Equivalent fractions
Add / subtract
Multiply
Divide
Mixed number
Fraction of a number

Add — unlike denominators

Method. Butterfly method: = , then simplify to 1 .

Worked example
What is + ?
A
B
C
D1
AnswerD — 1
Step-by-step
  1. The least common denominator of 5 and 9 is 45.
  2. Rename: = and = .
  3. Add the tops: 27 + 35 = 62.
  4. So = 1 .
Quick checkEstimate: ≈ 0.60 and ≈ 0.78, sum ≈ 1.38; 1 ≈ 1.38.
Common mistakes
  • A (): used a common bottom number but did not rename the tops
  • B (): multiplied instead of adding
  • C (): added the tops and added the bottoms

Subtract — unlike denominators

Method. Butterfly method: = , then simplify to .

Worked example
What is − ?
A
B
C1
D1
AnswerA —
Step-by-step
  1. The least common denominator of 6 and 2 is 6.
  2. Rename: = and = .
  3. Subtract the tops: 5 − 3 = 2.
  4. So = .
Quick checkAdd back: + = .
Common mistakes
  • B (): used a common bottom number but did not rename the tops
  • C (1): subtracted the tops and subtracted the bottoms
  • D (1 ): added instead of subtracting

Multiply — fraction × fraction

Method. Cancel any top number with any bottom number first (cross-cancel), then multiply the small numbers that are left.

Worked example
What is × ?
A
B
C
D
AnswerA —
Step-by-step
  1. Multiply the tops and multiply the bottoms.
  2. = , already in simplest form.
Quick checkThe product of two proper fractions is smaller than each: is less than and less than .
Common mistakes
  • B (): divided instead of multiplying (flipped the second fraction)
  • C (): added the tops and added the bottoms
  • D (): added instead of multiplying

Divide — fraction ÷ fraction

Method. Keep – change – flip: keep , change ÷ to ×, flip to 3.

Worked example
What is ÷ ?
A
B
C
D1
AnswerD — 1
Step-by-step
  1. Dividing by is the same as multiplying by its reciprocal 3.
  2. × 3 = = = 1 .
Quick checkMultiply back: 1 × = .
Common mistakes
  • A (): multiplied without flipping the second fraction
  • B (): added instead of dividing
  • C (): flipped the first number instead of the second

Divide — whole number ÷ fraction

Method. Keep – change – flip: keep 6, change ÷ to ×, flip to .

Worked example
What is 6 ÷ ?
A
B1
C6
D21
AnswerD — 21
Step-by-step
  1. Dividing by is the same as multiplying by its reciprocal .
  2. 6 × = = = 21.
Quick checkMultiply back: 21 × = 6.
Common mistakes
  • A (): flipped the first number instead of the second
  • B (1 ): multiplied without flipping the second fraction
  • C (6 ): added instead of dividing

Add mixed numbers

Method. Change to improper fractions and add: + = 5 ; or add wholes and fractions separately and carry any extra whole.

Worked example
What is 1 + 4 ?
A5
B5
C5
D5
AnswerD — 5
Step-by-step
  1. Add the whole numbers: 1 + 4 = 5.
  2. Add the fractions with the common denominator 10: + = = .
  3. Combine: 5 .
Quick checkEstimate: about 1 + 4 = 5, plus less than 2 from the fractions; 5 fits.
Common mistakes
  • A (5 ): used a common bottom number but did not rename the tops
  • B (5 ): added the whole numbers, then added the tops and added the bottoms
  • C (5 ): subtracted the fraction parts instead of adding them

Find the whole from a fractional part

Method. Divide by the fraction: 60 ÷ = 60 × = 72.

Worked example
of a number is 60. What is the number?
A12
B50
C72
D360
AnswerC — 72
Step-by-step
  1. of the whole is 60.
  2. So one part is 60 ÷ 5 = 12.
  3. The whole has 6 parts: 6 × 12 = 72.
Quick check of 72 = 72 ÷ 6 × 5 = 60.
Common mistakes
  • A (12): found the size of one part only
  • B (50): found of the part instead of the whole
  • D (360): multiplied by the bottom only

Number line — mixed numbers

Method. P is past 1, so start at 1 and count 1 space of size : 1 .

Worked example
On the number line, what number does point P show?
Figure for the worked example
A
B
C1
D2
AnswerC — 1
Step-by-step
  1. Each whole is cut into 6 equal spaces.
  2. So each space is .
  3. P is 7 spaces from 0, which is = 1 (one whole and more).
Quick checkP is 5 spaces before 2: 2 − = 1 .
Common mistakes
  • A (): left out the whole from 0 to 1
  • B (): used all the spaces from 0 to 2 as the bottom number
  • D (2 ): added an extra whole

Compare fractions

Method. Compare each fraction with and with 1 first; for close ones cross-multiply: > when a × d > b × c.

Worked example
Which fraction is the least?
A
B
C
D
AnswerA —
Step-by-step
  1. Compare each fraction with : is less than because 2 × 6 = 12 < 13.
  2. , and are each greater than , since each top number is more than half its bottom number.
  3. So is the least.
Quick checkTurn into a decimal: about 0.462; it is the least of the decimals.
Common mistakes
  • B (): chose the fraction with the least top number
  • C (): chose the fraction with the least bottom number
  • D (): chose the greatest fraction instead of the least

Subtract mixed numbers (regrouping)

Method. Use improper fractions: − = 2 ; this avoids regrouping.

Worked example
What is 7 − 4 ?
A1
B2
C3
D3
AnswerB — 2
Step-by-step
  1. Rename with denominator 10: 7 − 4 .
  2. Since is less than , regroup one whole: 7 = 6 .
  3. Now subtract: 6 − 4 = 2 and − = .
  4. Answer: 2 .
Quick checkAdd back: 2 + 4 = 7 .
Common mistakes
  • A (1 ): subtracted both fraction parts
  • C (3 ): subtracted the smaller fraction from the larger instead of regrouping
  • D (3 ): regrouped but did not take 1 from the whole number

Multiply mixed numbers

Method. Never multiply the whole parts and the fraction parts separately; convert to improper fractions and cross-cancel first.

Worked example
What is 2 × 1 ?
A2
B2
C3
D5
AnswerB — 2
Step-by-step
  1. Change each mixed number to an improper fraction: 2 = and 1 = .
  2. Multiply: = = 2 .
Quick checkEstimate: about 2 × 1 = 2 and at most 6; 2 is between them.
Common mistakes
  • A (2 ): multiplied the whole numbers and the fractions separately
  • C (3 ): added instead of multiplying
  • D (5 ): added the bottoms instead of multiplying them

Divide a mixed number by a fraction

Method. Keep – change – flip after converting the mixed number to an improper fraction.

Worked example
What is 3 ÷ ?
A
B2
C4
D4
AnswerD — 4
Step-by-step
  1. Change 3 to .
  2. Multiply by the reciprocal of : × = = 4 .
Quick checkMultiply back: 4 × = 3 .
Common mistakes
  • A (): flipped the first number instead of the second
  • B (2 ): multiplied without flipping the second fraction
  • C (4 ): divided only the whole number part

Fraction of a quantity — two steps

Method. Multiply by what is left each time: 18 × × = 6.

Worked example
Mia had $18. Mia spent of the money on a book and then of the remaining money on a game. How many dollars did Mia have left?
A3
B6
C9
D12
AnswerB — 6
Step-by-step
  1. First purchase: of 18 = 18 ÷ 2 × 1 = 9, leaving 18 − 9 = 9.
  2. Second purchase: of the remaining 9 = 9 ÷ 3 × 1 = 3, leaving 9 − 3 = 6.
Quick checkSpent 9 + 3 = 12 and kept 6; 12 + 6 = 18.
Common mistakes
  • A (3): took the second fraction of the original amount instead of the remaining amount
  • C (9): forgot the second purchase
  • D (12): gave the total spent instead of the amount left

Find the whole from a fractional part (word problem)

Method. Divide by the fraction: 21 ÷ = 21 × = 24.

Worked example
A tank is full and holds 21 liters right now. How many liters does the full tank hold?
A18
B24
C29
D168
AnswerB — 24
Step-by-step
  1. of the whole is 21.
  2. So one part is 21 ÷ 7 = 3.
  3. The whole has 8 parts: 8 × 3 = 24.
Quick check of 24 = 24 ÷ 8 × 7 = 21.
Common mistakes
  • A (18 ): found of the part instead of the whole
  • C (29): added the bottom number to the part
  • D (168): multiplied by the bottom only

Complex fraction

Method. Multiply the top and the bottom of the complex fraction by 84 (the LCD) to clear the small fractions, then divide.

Worked example
What is the value of the complex fraction / ?
A
B
C
D1
AnswerB —
Step-by-step
  1. Work out the top first: 1 − = − = .
  2. Then divide by the bottom: ÷ = × = = .
Quick checkMultiply back: × = = 1 − .
Common mistakes
  • A (): divided before subtracting
  • C (): left out the 1 − part
  • D (1 ): added instead of subtracting

Order of operations with fractions

Method. Do the × first, simplify it, then add with a common denominator.

Worked example
What is + × ?
A
B
C1
D1
AnswerB —
Step-by-step
  1. Multiply before adding: × = = .
  2. Then add: + = .
Quick check must be more than , because a positive amount is added to it.
Common mistakes
  • A (): added first, then multiplied (worked left to right)
  • C (1 ): divided instead of multiplying
  • D (1 ): added all three

Fraction between two fractions

Method. Change all fractions to decimals (top ÷ bottom) and pick the one strictly between the two given decimals.

Worked example
Which fraction is between and ?
A
B
C
D
AnswerC —
Step-by-step
  1. Rename with the common denominator 273: = , = and = .
  2. Only has a top number strictly between 182 and 195.
Quick checkAs decimals: ≈ 0.667, ≈ 0.692, ≈ 0.714.
Common mistakes
  • A (): is greater than , so it is not between
  • B (): is equal to , so it is not between
  • D (): is less than , so it is not between

Decimals

Line up the decimal points to add or subtract. To multiply, multiply as whole numbers and count the decimal places. To divide by a decimal, move both decimal points to make the divisor a whole number.

Key formulas
Place value
Multiply
Divide
Decimal to fraction
Rounding

Multiply decimals

Method. Estimate first: about 9 × 6 = 54, then place the point in 5518 to get a number near that: 55.18.

Worked example
What is 8.9 × 6.2?
A5.518
B15.1
C55.18
D551.8
AnswerC — 55.18
Step-by-step
  1. Multiply as whole numbers: 89 × 62 = 5518.
  2. The factors have 1 + 1 = 2 decimal places in all.
  3. So the product has 2: 55.18.
Quick checkCount decimal places: 55.18 has 2 (trailing zeros dropped) — consistent with 2 places in 5518.
Common mistakes
  • A (5.518): counted one decimal place too many
  • B (15.1): added instead of multiplying
  • D (551.8): counted one decimal place too few

Divide a decimal by a whole number

Method. Split 58 into parts 4 divides easily: 40 ÷ 4 = 10 and 18 ÷ 4 = 4.5, so 58 ÷ 4 = 14.5.

Worked example
What is 58 ÷ 4?
A1.45
B14.5
C145
D232
AnswerB — 14.5
Step-by-step
  1. Divide: 4 goes into 58 fourteen times (4 × 14 = 56) with 2 left over.
  2. Write 58 as 58.0 and bring down the 0: 20 ÷ 4 = 5, so the next digit, after the decimal point, is 5.
  3. So 58 ÷ 4 = 14.5.
Quick checkMultiply back: 14.5 × 4 = 58.
Common mistakes
  • A (1.45): put the decimal point one place too far left
  • C (145): put the decimal point one place too far right
  • D (232): multiplied instead of dividing

Divide by a decimal

Method. Move the decimal point 2 places right in both numbers, then divide.

Worked example
What is 6.48 ÷ 1.62?
A4
B10.4976
C40
D400
AnswerA — 4
Step-by-step
  1. Make the divisor a whole number: multiply both numbers by 100.
  2. 6.48 × 100 = 648 and 1.62 × 100 = 162.
  3. Now divide: 648 ÷ 162 = 4.
Quick checkMultiply back: 4 × 1.62 = 6.48.
Common mistakes
  • B (10.4976): multiplied instead of dividing
  • C (40): put the decimal point one place too far right
  • D (400): put the decimal point two places too far right

Estimate a product of decimals

Method. Round first, then multiply the easy whole numbers: 9 × 17 = 153.

Worked example
Rounding each number to the nearest whole number, which is the best estimate of 8.6 × 16.8?
A15.3
B26
C128
D153
AnswerD — 153
Step-by-step
  1. 8.6 rounds to 9 and 16.8 rounds to 17.
  2. Multiply the rounded numbers: 9 × 17 = 153.
Quick checkThe exact product is 144.48, close to 153.
Common mistakes
  • A (15.3): placed the decimal point in the estimate
  • B (26): added instead of multiplying
  • C (128): dropped the decimal parts instead of rounding

Estimation with money

Method. Round, then multiply whole numbers: 6 × 2 = 12.

Worked example
Gas costs $2.21 per gallon. Rounding both numbers to the nearest whole number, about how much do 6.3 gallons cost?
A$8
B$12
C$18
D$120
AnswerB — $12
Step-by-step
  1. $2.21 rounds to $2 and 6.3 rounds to 6.
  2. Estimate: 6 × $2 = $12.
Quick checkExact cost: $13.923, close to $12.
Common mistakes
  • A ($8): added instead of multiplying
  • C ($18): rounded the price up instead of to the nearest dollar
  • D ($120): put one extra zero on the estimate

Decimals in money — multi-step

Method. Work in cents: 6 × 350 = 2100 cents; 5000 − 2100 = 2900 cents = $29.00.

Worked example
Notebooks cost $3.50 each. Priya buys 6 notebooks and pays with $50. How much change does Priya get?
A$21.00
B$25.50
C$29.00
D$46.50
AnswerC — $29.00
Step-by-step
  1. Total cost: 6 × $3.50 = $21.00.
  2. Change: $50.00 − $21.00 = $29.00.
Quick checkCheck by adding back: $21.00 + $29.00 = $50.00, the amount paid.
Common mistakes
  • A ($21.00): gave the total cost instead of the change
  • B ($25.50): multiplied by one item too many
  • D ($46.50): subtracted the price of only one item

Reasonableness — place the decimal point

Method. Count decimal places: 1 + 1 = 2, so put the point 2 places from the right of 182: 1.82.

Worked example
The digits of the product 1.3 × 1.4 are 182 (before the decimal point is placed). Which is the correct product?
A0.0182
B0.182
C1.82
D18.2
AnswerC — 1.82
Step-by-step
  1. Estimate: 1.3 is between 1 and 2, and 1.4 is between 1 and 2.
  2. So the product is between 1 × 1 = 1 and 2 × 2 = 4.
  3. The only choice between 1 and 4 is 1.82.
Quick checkDivide back to check: 1.82 ÷ 1.4 = 1.3, the first factor.
Common mistakes
  • A (0.0182): placed the decimal point two places too far left
  • B (0.182): placed the decimal point one place too far left
  • D (18.2): placed the decimal point one place too far right

Percents

Percent means per hundred. Change the percent to a fraction or decimal, then multiply. Discounts and markups change a price by a percent of the original; percent change compares the change with the original amount.

Key formulas
Fraction, decimal, percent
Percent of
Find the percent
Find the whole
Discount
Tax, tip or markup
Percent change
Simple interest

Percent of a number

Method. Find 10% by moving the decimal point one place left, then scale: 20% of 48 = 9.6.

Worked example
What is 20% of 48?
A9.6
B38.4
C68
D96
AnswerA — 9.6
Step-by-step
  1. 20% means 20 per 100.
  2. So multiply by 0.2: 0.2 × 48 = 9.6.
Quick check9.6 ÷ 48 = 0.2, which is 20%.
Common mistakes
  • B (38.4): found the amount left after taking the percent
  • C (68): added the percent to the number
  • D (96): moved the decimal point one place too far right

Fraction to percent

Method. Scale the fraction to a denominator of 100 if you can: = = 93.75%.

Worked example
Write as a percent.
A0.9375%
B6.25%
C15.16%
D93.75%
AnswerD — 93.75%
Step-by-step
  1. Divide to get a decimal.
  2. Then multiply by 100: 15 ÷ 16 = 0.9375, and 0.9375 × 100 = 93.75%.
Quick check93.75% of 16 is 15, which equals the top number 15.
Common mistakes
  • A (0.9375%): wrote the decimal as the percent (did not multiply by 100)
  • B (6.25%): used the other part (100% minus the answer)
  • C (15.16%): put a decimal point between the top and bottom numbers

Percent to fraction (simplest form)

Method. Write the percent over 100, clear any decimal, then simplify.

Worked example
Write 80% as a fraction in simplest form.
A
B
C
D8
AnswerC —
Step-by-step
  1. 80% = .
  2. This simplifies to .
Quick checkCheck by dividing: = 4 ÷ 5 = 0.8 = 80%.
Common mistakes
  • A (): used 1,000 as the bottom number instead of 100
  • B (): used the other part (100% minus the percent)
  • D (8): used 10 as the bottom number instead of 100

Find the percent

Method. Write the fraction and scale it to a denominator of 100.

Worked example
125 is what percent of 200?
A0.625%
B37.5%
C62.5%
D160%
AnswerC — 62.5%
Step-by-step
  1. Percent = part ÷ whole × 100.
  2. Percent = 125 ÷ 200 × 100 = 0.625 × 100.
  3. So Percent = 62.5%.
Quick check62.5% of 200 = 125, the part given.
Common mistakes
  • A (0.625%): did not multiply by 100
  • B (37.5%): found the percent that is left over
  • D (160%): divided the whole by the part

Discounts and sale prices

Method. Pay 87.5% of the price: 0.875 × $440.00 = $385.00.

Worked example
A pair of shoes costs $440.00. It is on sale for 12.5% off. What is the sale price?
A$55.00
B$385.00
C$427.50
D$495.00
AnswerB — $385.00
Step-by-step
  1. Discount = 12.5% of $440.00 = $55.00.
  2. Sale price = $440.00 − $55.00 = $385.00.
Quick check$440.00 − $385.00 = $55.00, which is 12.5% of $440.00.
Common mistakes
  • A ($55.00): gave the discount instead of the sale price
  • C ($427.50): subtracted 12.5 dollars instead of 12.5%
  • D ($495.00): added the discount instead of subtracting

Tax and tips

Method. Multiply by 1.15 (115%) in one step: 1.15 × $42.20 = $48.53.

Worked example
A meal costs $42.20. A 15% tip is added. What is the total cost?
A$6.33
B$48.53
C$57.20
D$105.50
AnswerB — $48.53
Step-by-step
  1. Tip = 15% of $42.20 = 0.15 × $42.20 = $6.33.
  2. Total = $42.20 + $6.33 = $48.53.
Quick check$48.53 − $42.20 = $6.33, which is 15% of $42.20.
Common mistakes
  • A ($6.33): gave the tip only, not the total
  • C ($57.20): added 15 dollars instead of 15%
  • D ($105.50): moved the decimal point when finding the percent

Markup

Method. Multiply the cost by 1.75: $182.00.

Worked example
A store buys a toy for $104.00 and marks the price up by 75%. What is the selling price?
A$78.00
B$182.00
C$416.00
D$7,800.00
AnswerB — $182.00
Step-by-step
  1. Markup = 75% of $104.00 = $78.00.
  2. Selling price = $104.00 + $78.00 = $182.00.
Quick check($182.00 − $104.00) ÷ $104.00 = 0.75 = 75%.
Common mistakes
  • A ($78.00): gave the markup only, not the selling price
  • C ($416.00): treated the markup as a percent of the selling price
  • D ($7,800.00): used 75 instead of 75% and gave only the markup: 104 × 75

Percent increase and decrease

Method. New ÷ original = 1.35, so the change is 1.35 − 1 = +0.35 → 35%.

Worked example
The number of members changed from 120 to 162. What is the percent increase?
A35%
B42%
C65%
D135%
AnswerA — 35%
Step-by-step
  1. Change = 162 − 120 = 42.
  2. Percent change = change ÷ original × 100 = 42 ÷ 120 × 100 = 35%.
Quick check120 + 35% of 120 = 162.
Common mistakes
  • B (42%): gave the amount of change as the percent
  • C (65%): gave the percent that remains instead of the change
  • D (135%): gave the new value as a percent of the original

Simple interest

Method. One year's interest is $45.50; multiply by 6 years and add the principal.

Worked example
$1,300 is invested at 3.5% simple interest per year for 6 years. What is the total amount in the account at the end?
A$27.30
B$45.50
C$273.00
D$1,573.00
AnswerD — $1,573.00
Step-by-step
  1. Simple interest I = P × r × t = $1,300 × 0.035 × 6 = $273.00.
  2. Total = $1,300 + $273.00 = $1,573.00.
Quick check$273.00 ÷ 6 = $45.50 per year, which is 3.5% of $1,300.
Common mistakes
  • A ($27.30): moved the decimal point one place too far left in the rate
  • B ($45.50): found the interest for one year only
  • C ($273.00): gave the interest only, not the total

04.03 Algebra

The Middle Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers algebra: expressions, one- and two-step equations and inequalities, patterns and simple functions.

Solving Equations and Inequalities

Undo operations in reverse order, doing the same thing to both sides. Distribute and combine like terms first; if the variable is on both sides, move it to one side. Check by substituting your answer. Solve an inequality the same way, but reverse the sign when you multiply or divide both sides by a negative number.

Key formulas
Two-step equation
Example
Distribute first
Combine like terms
Variable on both sides
Fractions
Check
Inequality symbols
Solve an inequality
Flip rule

Two-step equations

Method. Undo addition/subtraction first, then multiplication.

Worked example
Solve for x: 6x + 5 = 17
A2
B
C12
D72
AnswerA — 2
Step-by-step
  1. Subtract 5 on both sides: 6x = 12.
  2. Divide by 6: x = 2.
Quick check6(2) + 5 = 12 + 5 = 17.
Common mistakes
  • B (): added the constant instead of subtracting it
  • C (12): forgot to divide by the coefficient
  • D (72): multiplied by the coefficient instead of dividing

Multi-step equations — distributing

Method. Divide both sides by 8 first: x + 1 = 5, so x = 4.

Worked example
Solve for x: 8(x + 1) = 40
A4
B
C6
D32
AnswerA — 4
Step-by-step
  1. Distribute: 8x + 8 = 40.
  2. Subtract 8: 8x = 32.
  3. Divide by 8: x = 4.
Quick check8(4 + 1) = 8(5) = 40.
Common mistakes
  • B (): multiplied only x by 8
  • C (6): used the wrong sign when moving the constant
  • D (32): forgot to divide by 8

Equations with fractions

Method. Divide by 4, then multiply by 7: 28 ÷ 4 = 7, × 7 = 49.

Worked example
Solve for x: x = 28
A7
B16
C
D49
AnswerD — 49
Step-by-step
  1. Multiply both sides by the reciprocal .
  2. x = 28 × .
  3. So x = 49.
Quick checksubstitute x = 49 into x = 28; both sides equal 28.
Common mistakes
  • A (7): divided by 4 but did not multiply by 7
  • B (16): multiplied by instead of its reciprocal
  • C (): subtracted

Equations with decimals

Method. Multiply every term by 10 to clear the decimals, then solve.

Worked example
Solve for x: 1.5x + 3.4 = −34.1
A−250
B−56.25
C−37.5
D−25
AnswerD — −25
Step-by-step
  1. Subtract 3.4: 1.5x = −37.5.
  2. Divide by 1.5: x = −25.
Quick check1.5 × (−25) + 3.4 = −37.5 + 3.4 = −34.1.
Common mistakes
  • A (−250): misplaced the decimal point when dividing (one place too far right)
  • B (−56.25): multiplied by the coefficient instead of dividing
  • C (−37.5): forgot to divide by the coefficient

Variables on both sides

Method. Collect x-terms on one side and numbers on the other; then divide.

Worked example
Solve for x: −7x + 4 = 14x − 122
A−18
B
C6
D18
AnswerC — 6
Step-by-step
  1. Subtract 14x from both sides: −21x + 4 = −122.
  2. Subtract 4: −21x = −126.
  3. Divide by −21: x = 6.
Quick checkleft side −7(6) + 4 = −38; right side 14(6) − 122 = −38.
Common mistakes
  • A (−18): added the x-terms instead of subtracting
  • B (): added the constants instead of subtracting
  • D (18): ignored the x-term on the right side

Multi-step equations — combining like terms

Method. Distribute, combine like terms on each side, then solve the two-step equation.

Worked example
Solve for x: 8(x + 9) + 3x + 7 = 46
A−
B−
C−3
D
AnswerC — −3
Step-by-step
  1. Distribute: 8x + 72 + 3x + 7 = 46.
  2. Combine like terms: 11x + 79 = 46.
  3. So 11x = −33 and x = −3.
Quick check8(−3 + 9) − 9 + 7 = 48 − 9 + 7 = 46.
Common mistakes
  • A (−): subtracted the x-terms instead of adding
  • B (−): did not combine the x-terms
  • D (): multiplied only x by 8

Patterns and Input–Output Rules

In an input–output table the same rule turns every input into its output. Look at how the output changes when the input goes up by 1; test your rule on every pair. Some patterns grow by a different amount each time, so check the differences.

Key formulas
Constant change
Example
Test the rule
Changing differences

Input–output tables

Method. Find how much the output grows per 1 input (the multiplier), then fix the starting amount.

Worked example
In the table, every output comes from its input by the same rule. Input: 1, 2, 3, 4. Output: 6, 10, 14, 18. What is the output when the input is 10?
A40
B42
C45
D58
AnswerB — 42
Step-by-step
  1. Each time the input goes up by 1, the output goes up by 4, so the rule multiplies by 4.
  2. Input 1 gives 6 = 4 × 1 + 2, so the rule is: multiply by 4, then add 2.
  3. For input 10: 4 × 10 + 2 = 42.
Quick checkthe rule gives 6, 10, 14, 18 for inputs 1, 2, 3, 4, matching the table ✓.
Common mistakes
  • A (40): used only the multiplication part of the rule
  • C (45): scaled the last output by the input
  • D (58): added the step to the last output once for each unit of the input

Finding the rule

Method. Test each choice on ALL pairs, not just the first one.

Worked example
Which rule turns each input into its output? Input: 2, 9, 10. Output: 11, 32, 35.
AMultiply by 4, then add 3
BAdd 21
CAdd 5, then multiply by 3
DMultiply by 3, then add 5
AnswerD — Multiply by 3, then add 5
Step-by-step
  1. Test the rule on every pair.
  2. 2 → 2 × 3 + 5 = 11.
  3. 9 → 9 × 3 + 5 = 32.
  4. 10 → 10 × 3 + 5 = 35.
  5. All three pairs match.
Quick checkthe input 10 gives 10 × 3 + 5 = 35, the last output ✓.
Common mistakes
  • A (Multiply by 4, then add 3): checked only the first pair
  • B (Add 21): used the change in the outputs as the rule
  • C (Add 5, then multiply by 3): did the operations in the wrong order

Nonlinear patterns

Method. If the changes grow by a constant amount, compare the outputs with the square numbers.

Worked example
The table shows a pattern. Input: 1, 2, 3, 4. Output: −2, 1, 6, 13. If the pattern continues, what is the output when the input is 9?
A15
B48
C78
D81
AnswerC — 78
Step-by-step
  1. The changes in output are 3, 5, 7, which grow by 2.
  2. So the rule involves squaring.
  3. Compare with the squares: −2 = − 3, 1 = − 3, 6 = − 3, 13 = − 3.
  4. The rule is output = (input)² − 3.
  5. For 9: − 3 = 78.
Quick checkthe rule gives −2, 1, 6, 13 for inputs 1, 2, 3, 4 ✓.
Common mistakes
  • A (15): doubled the input instead of squaring it
  • B (48): continued with the last change in y as if the function were linear
  • D (81): forgot the constant

04.04 Geometry and Measurement

The Middle Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers geometry and measurement: angles, triangles and quadrilaterals, perimeter and area, circles, volume and surface area, and the coordinate grid.

Lines and Angles

Angle pairs: complementary angles add to 90°, supplementary angles add to 180°, and vertical angles are equal. When a line crosses two parallel lines, corresponding angles and alternate interior angles are equal. The angles of a quadrilateral add to 360°.

Key formulas
Complementary
Supplementary (straight line)
Vertical angles
Around a point
Parallel lines
Same-side interior
Quadrilateral
Clock

Parallel lines and transversals

Method. Parallel lines: all acute angles are equal, all obtuse angles are equal, and an acute + an obtuse = 180°.

Worked example
In the figure, lines ℓ and m are parallel. What is the value of x?
Figure for the worked example
A19
B71
C109
D289
AnswerB — 71
Step-by-step
  1. The angle marked 71° and the angle marked x° are alternate interior angles.
  2. With parallel lines, alternate interior angles are equal.
  3. So x = 71.
Quick checkone angle is acute and the other obtuse only when they add to 180°; here 71 and 71 are equal ✓.
Common mistakes
  • A (19): used complementary angles
  • C (109): assumed the angles are supplementary
  • D (289): subtracted from 360°

Angle relationships with algebra

Method. Write the angle relationship as an equation, then solve.

Worked example
Two angles measure (3x − 13)° and (2x + 5)°. The angles are vertical angles. What is the measure of the first angle, in degrees?
A18
B36
C41
D139
AnswerC — 41
Step-by-step
  1. Vertical angles are equal: 3x − 13 = 2x + 5.
  2. Subtract 2x and add 13: x = 18.
  3. The first angle is 3(18) − 13 = 41°.
Quick checkthe angles are 41° and 41°, which are equal ✓.
Common mistakes
  • A (18): gave x instead of the angle
  • B (36): used the second angle but left out the + 5: 2 × 18 = 36
  • D (139): gave the supplement

Triangles

The angles of a triangle add to 180°. An exterior angle equals the sum of the two interior angles not next to it. An isosceles triangle has two equal angles; every angle of an equilateral triangle is 60°.

Key formulas
Angle sum
Exterior angle
Isosceles
Equilateral
Triangle inequality

Exterior angles of a triangle

Method. Exterior angle = sum of the two remote interior angles.

Worked example
Two interior angles of a triangle measure 34° and 73°. What is the measure of the exterior angle at the third vertex, in degrees?
A39
B73
C107
D253
AnswerC — 107
Step-by-step
  1. An exterior angle equals the sum of the two remote interior angles.
  2. So the exterior angle is 34° + 73° = 107°.
Quick checkthe interior angle at the third vertex is 180 − 107 = 73, and 73 + 107 = 180 ✓.
Common mistakes
  • A (39): subtracted the two angles
  • B (73): gave the interior angle at the third vertex
  • D (253): subtracted from 360°

Triangle angle problems

Method. Largest angle = 180 × (largest part ÷ sum of the parts).

Worked example
The angles of a triangle are in the ratio 2:5:8. What is the measure of the largest angle, in degrees?
A12
B24
C60
D96
AnswerD — 96
Step-by-step
  1. Let the angles be 2k, 5k and 8k.
  2. Then 15k = 180.
  3. So k = 12.
  4. The largest angle is 8 × 12 = 96°.
Quick check24 + 60 + 96 = 180 ✓.
Common mistakes
  • A (12): gave the value of one part
  • B (24): gave the smallest angle
  • C (60): assumed the three angles are equal

Area and Perimeter

Area measures square units inside a figure; perimeter adds the side lengths. Split composite figures into simple shapes, then add or subtract their areas.

Key formulas
Square
Rectangle
Triangle
Parallelogram
Trapezoid

Area of triangles

Method. Use the perpendicular height, not the slanted side.

Worked example
What is the area of the triangle shown?
Figure for the worked example
A18
B28
C35
D56
AnswerB — 28
Step-by-step
  1. Area of a triangle = ½ × base × height.
  2. The height is the dashed segment, 4, which is perpendicular to the base 14.
  3. So A = ½ × 14 × 4 = 28.
Quick check2 × 28 = 56 = 14 × 4 ✓.
Common mistakes
  • A (18): added the base and height
  • C (35): used the slanted side as the height
  • D (56): forgot to multiply by ½

Perimeter of polygons

Method. Parallelogram: A = base × height; P uses the slanted sides.

Worked example
What is the perimeter of the parallelogram shown?
Figure for the worked example
A42
B58
C76
D84
AnswerD — 84
Step-by-step
  1. A parallelogram has two pairs of equal sides: 22 and 20.
  2. The height is not a side.
  3. So P = 2 × (22 + 20) = 84.
Quick check22 + 20 + 22 + 20 = 84 ✓.
Common mistakes
  • A (42): added only two sides
  • B (58): added the three labeled lengths
  • C (76): used the height instead of the slanted side

Area of parallelograms and trapezoids

Method. Parallelogram: A = base × height; P uses the slanted sides.

Worked example
What is the area of the parallelogram shown?
Figure for the worked example
A27
B62
C63
D126
AnswerD — 126
Step-by-step
  1. Area of a parallelogram = base × height.
  2. The height 6 is perpendicular to the base 21.
  3. So A = 21 × 6 = 126.
Quick check126 ÷ 21 = 6, the height ✓.
Common mistakes
  • A (27): added the base and height
  • B (62): found the perimeter
  • C (63): multiplied by ½ as for a triangle

Composite figures

Method. Split the figure into rectangles or subtract the missing corner.

Worked example
The figure shown is made of rectangles, and all corners are right angles. What is its area, in square units?
Figure for the worked example
A15
B54
C88
D176
AnswerC — 88
Step-by-step
  1. Think of the figure as a 16 × 11 rectangle with an 11 × 8 corner removed (11 = 16 − 5 and 8 = 11 − 3).
  2. The big rectangle is 16 × 11 = 176.
  3. The corner is 11 × 8 = 88.
  4. So the area is 176 − 88 = 88.
Quick checksplit another way, 5 × 11 + 11 × 3 = 55 + 33 = 88 ✓.
Common mistakes
  • A (15): multiplied the two short sides
  • B (54): found the perimeter
  • D (176): did not remove the missing corner

Circles

The diameter is twice the radius. Circumference is the distance around a circle and area is the space inside; both use π (about 3.14 or 22/7). A semicircle is half a circle, so its perimeter is half the circumference plus the diameter.

Key formulas
Diameter
Circumference
Area
Value of π
Semicircle perimeter
Work backward

Circumference

Method. C = πd = r: multiply the diameter by π.

Worked example
A circle has a diameter of 8 meters. What is its circumference, in meters?
A
B
C
D
AnswerB —
Step-by-step
  1. The circumference is C = πd.
  2. So C = π × 8 = meters.
Quick check ÷ π = 8, which is the diameter ✓.
Common mistakes
  • A (): used π times the radius
  • C (): used the diameter as the radius
  • D (): used π times the diameter squared

Area of a circle

Method. A = πr²; halve the diameter first.

Worked example
A circle has a diameter of 12 feet. What is its area, in square feet?
A
B
C
D
AnswerC —
Step-by-step
  1. The radius is 12 ÷ 2 = 6.
  2. The area is A = πr².
  3. So A = π × = square feet.
Quick check ÷ π = 36 = ✓.
Common mistakes
  • A (): forgot to square the radius
  • B (): found the circumference
  • D (): used the diameter as the radius

Working backward with circles

Method. Find the radius first, then use the other formula.

Worked example
A circle has a circumference of units. What is its area, in square units?
A
B
C
D
AnswerC —
Step-by-step
  1. C = r = .
  2. So r = 3.
  3. The area is A = πr² = π × = square units.
Quick checka radius of 3 gives C = and A = ✓.
Common mistakes
  • A (): forgot to square the radius
  • B (): gave the circumference
  • D (): used the diameter as the radius

Semicircles and quarter circles

Method. Take the right fraction of the full circle, then add any straight edges.

Worked example
A quarter circle has a radius of 9 inches. Using 3.14 for π, what is its area, in square inches?
A14.13
B63.585
C127.17
D254.34
AnswerB — 63.585
Step-by-step
  1. The whole circle has area 3.14 × = 254.34.
  2. A quarter circle is one fourth of that: 254.34 ÷ 4 = 63.585 square inches.
Quick check4 × 63.585 = 254.34, the full circle's area ✓.
Common mistakes
  • A (14.13): used the circumference formula
  • C (127.17): found the area of a half circle
  • D (254.34): gave the area of the whole circle

Volume and Surface Area

Volume measures cubic units inside a solid; for a prism or cylinder it is the base area times the height. Surface area adds the areas of all the faces.

Key formulas
Cube
Rectangular box
Prism
Triangular prism
Cylinder

Surface area of prisms

Method. Cube: V = and SA = 6.

Worked example
A cube has edges of length 10. What is its surface area?
A100
B400
C600
D1000
AnswerC — 600
Step-by-step
  1. A cube has 6 square faces, each with area = 100.
  2. So SA = 6 × 100 = 600.
Quick check600 ÷ 6 = 100 = ✓.
Common mistakes
  • A (100): found the area of one face
  • B (400): counted only four faces
  • D (1000): found the volume

Volume with fractional edges

Method. Change mixed numbers to improper fractions, then multiply.

Worked example
A box measures 2 feet by 5 feet by 6 feet. What is its volume, in cubic feet?
A75
B90
C115
D120
AnswerA — 75
Step-by-step
  1. V = l × w × h.
  2. Write 2 as .
  3. So V = × 5 × 6 = 75 cubic feet.
Quick check2 × 30 = 75 because × 30 = 75 ✓.
Common mistakes
  • B (90): rounded the length up
  • C (115): found the surface area
  • D (120): inverted the fraction part of the length

Volume of triangular prisms

Method. Prism: V = base area × length; use the legs for a right triangle.

Worked example
A prism has a right-triangle base with legs 6 and 8 and hypotenuse 10. The prism is 7 units long. What is its volume, in cubic units?
A24
B168
C210
D336
AnswerB — 168
Step-by-step
  1. V = (area of base) × length.
  2. The base area is ½ × 6 × 8 = 24.
  3. So V = 24 × 7 = 168 cubic units.
Quick check168 ÷ 7 = 24 = ½ × 6 × 8 ✓.
Common mistakes
  • A (24): gave only the area of the triangular base
  • C (210): used the hypotenuse as a leg
  • D (336): forgot the ½ in the triangle's area

Volume of cylinders

Method. Cylinder: V = πr²h; SA = r² + rh.

Worked example
What is the volume of the cylinder shown? Use 3.14 for π.
Figure for the worked example
A28.26
B56.52
C84.78
D339.12
AnswerC — 84.78
Step-by-step
  1. V = πr²h = π × × 3 = .
  2. Using 3.14 for π, this is 3.14 × 27 = 84.78.
Quick check84.78 ÷ 3.14 = 27, matching the formula ✓.
Common mistakes
  • A (28.26): forgot to square the radius
  • B (56.52): found the lateral area rh
  • D (339.12): used the diameter as the radius

Surface area of cylinders

Method. Cylinder: V = πr²h; SA = r² + rh.

Worked example
What is the total surface area of the cylinder shown? Give your answer in terms of π.
Figure for the worked example
A
B
C
D
AnswerA —
Step-by-step
  1. SA = r² + rh.
  2. SA = × + × 5 × 14 = + .
  3. So SA = .
Quick check ÷ π = 190, matching the formula ✓.
Common mistakes
  • B (): counted the curved surface twice
  • C (): found the volume
  • D (): used the diameter as the radius

The Coordinate Grid

A point (x, y) is x units across and y units up or down from the origin. On a horizontal or vertical line, the distance between two points is the difference of the coordinates that change. Reflections flip a point over a line.

Key formulas
Same y (horizontal)
Same x (vertical)
Reflect over the x-axis
Reflect over the y-axis
Translation

Distance along grid lines

Method. Same x or same y: subtract the other coordinates (a point left of or below zero adds its distance).

Worked example
What is the distance between (−4, −11) and (−4, 1)?
A10
B11
C12
D13
AnswerC — 12
Step-by-step
  1. The points have the same x-coordinate.
  2. So the distance is the difference of the other coordinates.
  3. 1 − (−11) = 12.
Quick check11 units to zero plus 1 unit past zero is 12 ✓.
Common mistakes
  • A (10): subtracted the absolute values
  • B (11): measured only from −11 to 0 and left out the 1 unit above zero
  • D (13): counted grid points instead of units

Polygons on the coordinate plane

Method. Find side lengths by subtracting coordinates.

Worked example
A rectangle has vertices (−7, −8), (6, −8), (6, −4), (−7, −4). What is its area?
A34
B52
C70
D104
AnswerB — 52
Step-by-step
  1. The width is 6 − (−7) = 13 and the height is −4 − (−8) = 4.
  2. So the area is 13 × 4 = 52.
Quick check52 ÷ 13 = 4, the height ✓.
Common mistakes
  • A (34): found the perimeter
  • C (70): counted grid points instead of units: 14 × 5 = 70
  • D (104): doubled the area

04.05 Data Analysis and Probability

The Middle Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers data and probability: tables and graphs, mean, median, mode and range, simple probability and counting.

Mean, Median, Mode and Range

The mean, median and mode describe the center of a data set; the range (greatest minus least) and the mean absolute deviation (MAD) describe how spread out it is. An outlier pulls the mean toward it but barely moves the median.

Key formulas
Mean
Sum from the mean
Median
Median (even count)
Mode
Range
Mean absolute deviation
Add k to every value

Mean

Method. Mean = sum of the values ÷ how many values there are.

Worked example
What is the mean of 5.7, 17, 5.9, 7?
A6.45
B8.9
C11.35
D35.6
AnswerB — 8.9
Step-by-step
  1. Add the values.
  2. So 5.7 + 17 + 5.9 + 7 = 35.6.
  3. Divide by the count, 4.
  4. So the mean is 35.6 ÷ 4 = 8.9.
Quick check8.9 × 4 = 35.6, the sum of the values ✓.
Common mistakes
  • A (6.45): gave the median
  • C (11.35): averaged only the greatest and least values
  • D (35.6): found the sum but did not divide

Median

Method. Count to the middle dot (or the middle two) from the left.

Worked example
The dot plot shows runs per game for some games. Each dot is one of the games. What is the median of the data?
Figure for the worked example
A7.5
B7.875
C8.5
D9
AnswerA — 7.5
Step-by-step
  1. There are 16 dots in all.
  2. The median is the mean of the values in positions 8 and 9, counting from the left.
  3. Those values are 7 and 8.
  4. So the median is (7 + 8) ÷ 2 = 7.5.
Quick check8 dots lie on each side of the median position ✓.
Common mistakes
  • B (7.875): gave the mean
  • C (8.5): gave the middle position instead of the value
  • D (9): gave the middle of the number line

Effect of outliers

Method. Find both means, then subtract; an outlier pulls the mean toward it.

Worked example
The data set 23, 15, 15, 27, 15, 103 has an outlier. By how much does the mean decrease when the outlier is removed?
A14
B19
C33
D84
AnswerA — 14
Step-by-step
  1. The mean with every value is 198 ÷ 6 = 33.
  2. The outlier is 103.
  3. Without it, the mean is 95 ÷ 5 = 19.
  4. The decrease is 33 − 19 = 14.
Quick check19 + 14 = 33, the original mean ✓.
Common mistakes
  • B (19): gave the new mean
  • C (33): gave the original mean
  • D (84): gave the outlier's distance from the new mean

Comparing data sets

Method. Find the mean of each set separately, then subtract.

Worked example
Data set A is 40, 28, 50, 23, 23. Data set B is 34, 37, 16, 5, 26. How much greater is the mean of A than the mean of B?
A−5
B2
C9.2
D46
AnswerC — 9.2
Step-by-step
  1. Mean of A = 164 ÷ 5 = 32.8.
  2. Mean of B = 118 ÷ 5 = 23.6.
  3. The difference is 32.8 − 23.6 = 9.2.
Quick check23.6 + 9.2 = 32.8, the mean of A ✓.
Common mistakes
  • A (−5): compared the ranges
  • B (2): compared the medians instead
  • D (46): compared the sums

Mean absolute deviation

Method. MAD = average distance from the mean.

Worked example
What is the mean absolute deviation (MAD) of 30, 30, 39, 48, 43?
A6.2
B6.4
C18
D32
AnswerB — 6.4
Step-by-step
  1. First find the mean.
  2. So 190 ÷ 5 = 38.
  3. The distances from 38 are 8, 8, 1, 10, 5.
  4. Their sum is 32.
  5. So MAD = 32 ÷ 5 = 6.4.
Quick checkthe distances above and below the mean both add to 16 ✓.
Common mistakes
  • A (6.2): measured distances from the median
  • C (18): gave the range
  • D (32): added the distances but did not divide

Graphs and Tables

Read the title, axes, scale and units before reading values. Bar graphs compare categories, line graphs show change over time, circle graphs show parts of a whole, and dot plots, stem-and-leaf plots and histograms show how data are spread.

Key formulas
Percent of whole
Circle graph
Change
Stem-and-leaf
Two-way table

Line graphs

Method. Read both points on the scale, then subtract the smaller from the larger.

Worked example
The line graph shows bikes sold each month. By how many bikes did the amount increase from May to June?
Figure for the worked example
A15
B20
C30
D80
AnswerB — 20
Step-by-step
  1. Read the points.
  2. So May = 30 and June = 50.
  3. The increase is 50 − 30 = 20.
Quick check30 + 20 = 50, the higher of the two points ✓.
Common mistakes
  • A (15): misreads June as 45, one grid line too low: 45 − 30 = 15
  • C (30): gives the May value
  • D (80): adds the two values

Circle graphs

Method. Number = percent × total ÷ 100.

Worked example
The circle graph shows the results for favorite season for 60 students. How many more of the students chose Fall than Spring?
Figure for the worked example
A6
B10
C24
D42
AnswerA — 6
Step-by-step
  1. The percents differ by 40% − 30% = 10%.
  2. Then 10% of 60 is × 60 = 6.
Quick checkFall = 24 and Spring = 18, and 24 − 18 = 6 ✓.
Common mistakes
  • B (10): subtracted the percents but did not find them of the total
  • C (24): gave the number for Fall only
  • D (42): added instead of subtracting

Histograms

Method. Add the heights of the bars from 70 onward.

Worked example
The histogram shows the heights of some plants. Each bar includes its left edge but not its right edge. How many plants had heights of at least 70?
Figure for the worked example
A4
B12
C22
D34
AnswerC — 22
Step-by-step
  1. At least 70 starts with the bar 70–80.
  2. Add that bar and every bar to its right.
  3. So 4 + 6 + 12 = 22.
Quick checkthe bars below 70 add to 12, and 12 + 22 = 34 ✓.
Common mistakes
  • A (4): used only one bar
  • B (12): counted the bars below
  • D (34): counted every bar

Stem-and-leaf plots

Method. Count the leaves after 56 in its row, then every leaf below that row.

Worked example
The stem-and-leaf plot shows ages of guests. How many values are greater than 56?
Figure for the worked example
A1
B7
C8
D9
AnswerC — 8
Step-by-step
  1. In the row with stem 5, only the leaf 9 is greater than 6, giving 1 value (59).
  2. Every value in the rows below it is greater, adding 5 + 2 = 7 more.
  3. So there are 1 + 7 = 8 values.
Quick check1 value (53) is less than 56, and 1 + 8 = 9 values in all ✓.
Common mistakes
  • A (1): counted the values below
  • B (7): counted only the rows below the one with stem 5
  • D (9): counted every value

Building data displays

Method. Tally each value into its interval; the bar height is the tally.

Worked example
These are the scores of 10 players: 40, 58, 55, 68, 61, 67, 44, 77, 50, 77. A histogram uses the intervals 40–49, 50–59, 60–69, 70–79. How tall is the bar for 40–49?
A2
B3
C8
D10
AnswerA — 2
Step-by-step
  1. Find the scores from 40 to 49, which are 40, 44.
  2. That is 2 scores.
  3. So the bar is 2 tall.
Quick checktallies for all four intervals add to 10 ✓.
Common mistakes
  • B (3): counted the next interval
  • C (8): counted the values outside the interval
  • D (10): counted every value

Probability

Probability is the number of favorable outcomes over the number of equally likely outcomes; it is between 0 and 1. Count outcomes by listing or by multiplying the choices at each step. The expected count is the probability times the number of trials.

Key formulas
Basic
Range of values
Complement
Counting principle
Independent events
Expected count

Experimental and theoretical probability

Method. Experimental = observed count ÷ trials.

Worked example
In 20 trials, a free throw was made 3 times. What is the experimental probability that a free throw is made?
A
B
C
D
AnswerA —
Step-by-step
  1. Divide the number of times it happened by the number of trials.
  2. That gives 3 ÷ 20 = .
Quick check3 + 17 = 20 trials ✓.
Common mistakes
  • B (): divides by the number of misses instead of the number of trials:
  • C (): assumes made and missed are equally likely
  • D (): uses the number of misses:

Compound events

Method. Independent “and” → multiply the probabilities.

Worked example
A bag holds 12 cards, and 5 of the cards are red. Ana rolls a fair number cube numbered 1 through 6 and picks one card from the bag at random. What is the probability that she rolls a 6 and picks a red card?
A
B
C
D
AnswerB —
Step-by-step
  1. The two results are independent.
  2. So multiply.
  3. P(a 6) = and P(a red card) = .
  4. So P(both) = × = .
Quick checkthere are 6 × 12 = 72 equally likely pairs and 5 are favorable, giving ✓.
Common mistakes
  • A (): counted only one combined outcome
  • C (): used only the first event
  • D (): added the probabilities