ISEE Upper Level · Mathematics · Mathematics Achievement · 04.03

Algebra: Study Guide

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers algebra: linear equations and inequalities, systems, functions and slope, polynomials, factoring and simple quadratics.

Linear Equations

Undo operations in reverse order, doing the same thing to both sides. Clear fractions first by multiplying by the common denominator, and check by substituting.

Key formulas
Inverse operations
Clearing fractions
Literal equations
No solution / all reals

Two-step equations

Method. Undo addition/subtraction first, then multiplication.

Worked example
Solve for x: 5x + 7 = −23
A−150
B−30
C−
D−6
AnswerD — −6
Step-by-step
  1. Subtract 7 on both sides: 5x = −30.
  2. Divide by 5: x = −6.
Quick check5(−6) + 7 = −30 + 7 = −23.
Common mistakes
  • A (−150): multiplied by the coefficient instead of dividing
  • B (−30): forgot to divide by the coefficient
  • C (−): divided first but did not divide the constant

Multi-step equations — distributing

Method. Divide both sides by 6 first: x − 1 = −10, so x = −9.

Worked example
Solve for x: 6(x − 1) = −60
A−54
B−11
C−
D−9
AnswerD — −9
Step-by-step
  1. Distribute: 6x − 6 = −60.
  2. Add 6: 6x = −54.
  3. Divide by 6: x = −9.
Quick check6(−9 − 1) = 6(−10) = −60.
Common mistakes
  • A (−54): forgot to divide by 6
  • B (−11): used the wrong sign when moving the constant
  • C (−): multiplied only x by 6

Variables on both sides

Method. Collect x-terms on one side and numbers on the other; then divide.

Worked example
Solve for x: −8x − 1 = −10x + 17
A−9
B−1
C9
D18
AnswerC — 9
Step-by-step
  1. Add 10x to both sides: 2x − 1 = 17.
  2. Add 1: 2x = 18.
  3. Divide by 2: x = 9.
Quick checkleft side −8(9) − 1 = −73; right side −10(9) + 17 = −73.
Common mistakes
  • A (−9): made a sign error moving the constants (2x = −18)
  • B (−1): added the x-terms instead of subtracting (−18x = 18)
  • D (18): forgot to divide by the coefficient 2 (2x = 18)

Equations with fractions

Method. Divide by 2, then multiply by 3: 8 ÷ 2 = 4, × 3 = 12.

Worked example
Solve for x: x = 8
A4
B
C
D12
AnswerD — 12
Step-by-step
  1. Multiply both sides by the reciprocal .
  2. x = 8 × .
  3. So x = 12.
Quick checksubstitute x = 12 into x = 8; both sides equal 8.
Common mistakes
  • A (4): divided by 2 but did not multiply by 3
  • B (): multiplied by instead of its reciprocal
  • C (): subtracted

Equations with decimals

Method. Multiply every term by 100 to clear the decimals, then solve.

Worked example
Solve for x: 0.14x + 5.4 = 1.48
A−28
B−3.92
C−2.8
D−0.5488
AnswerA — −28
Step-by-step
  1. Subtract 5.4: 0.14x = −3.92.
  2. Divide by 0.14: x = −28.
Quick check0.14 × (−28) + 5.4 = −3.92 + 5.4 = 1.48.
Common mistakes
  • B (−3.92): forgot to divide by the coefficient
  • C (−2.8): misplaced the decimal point when dividing (one place too far left)
  • D (−0.5488): multiplied by the coefficient instead of dividing

Equations from word problems — consecutive integers

Method. The average 34 is the middle of the list; count up from it in steps of 1.

Worked example
The sum of 3 consecutive integers is 102. What is the largest of these integers?
A33
B34
C35
D36
AnswerC — 35
Step-by-step
  1. Let the smallest be n: n + (n + 1) + (n + 2) = 102.
  2. So 3n + 3 = 102 and n = 33.
  3. The numbers are 33, 34, 35.
  4. The largest is 35.
Quick check33 + 34 + 35 = 102, and the numbers are consecutive integers.
Common mistakes
  • A (33): gave the smallest number
  • B (34): gave the middle (average) value
  • D (36): added one step too many

Equations from word problems — ages

Method. Take away the difference and share equally: (80 − 6) ÷ 2 = 37 for Leo; add 6 for Maya.

Worked example
Maya is 6 years older than Leo. The sum of their ages is 80. How old is Maya?
A37
B40
C43
D74
AnswerC — 43
Step-by-step
  1. Let Leo be L.
  2. Then Maya is L + 6, and L + (L + 6) = 80.
  3. So 2L = 74 and L = 37.
  4. Maya is 43.
Quick check37 + 43 = 80 and 43 − 37 = 6.
Common mistakes
  • A (37): gave Leo's age
  • B (40): ignored the difference in ages and split the sum equally
  • D (74): forgot to divide by 2

Multi-step equations — combining like terms

Method. Distribute, combine like terms on each side, then solve the two-step equation.

Worked example
Solve for x: 7(x + 9) + 7x − 3 = 172
A8
B
C16
D
AnswerA — 8
Step-by-step
  1. Distribute: 7x + 63 + 7x − 3 = 172.
  2. Combine like terms: 14x + 60 = 172.
  3. So 14x = 112 and x = 8.
Quick check7(8 + 9) + 56 − 3 = 119 + 56 − 3 = 172.
Common mistakes
  • B (): multiplied only x by 7
  • C (16): did not combine the x-terms
  • D (): used the wrong sign when moving the constants

Literal equations

Method. Undo the last operation done to w first (inverse operations).

Worked example
The formula A = lw is solved for w. Which equation is correct?
Aw = Al
Bw =
Cw =
Dw = A − l
AnswerB — w =
Step-by-step
  1. Isolate w by undoing each operation on it in reverse order.
  2. w = .
Quick checksubstitute for w in A = lw; the equation becomes an identity.
Common mistakes
  • A (w = Al): multiplied instead of dividing
  • C (w = ): divided the wrong way
  • D (w = A − l): subtracted instead of dividing

Solving for an expression

Method. No need to find x: 16x − 51 = 4(4x − 12) − 3 = 4(−48) − 3 = −195.

Worked example
If 4x − 12 = −48, what is the value of 16x − 51?
A−195
B−192
C−144
D−9
AnswerA — −195
Step-by-step
  1. x = = −9.
  2. Then 16x − 51 = 16(−9) − 51 = −195.
Quick checkwith x = −9, 4x − 12 = −48 ✓ and 16x − 51 = −195.
Common mistakes
  • B (−192): forgot the change to the constant (multiplied the equation by 4 only)
  • C (−144): left out the constant term
  • D (−9): gave x instead of the value of the expression

Equations from word problems — perimeter

Method. Half the perimeter is length + width = 54: 3w − 3 = 54, so w = 19.

Worked example
The length of a rectangle is 3 cm less than 2 times its width. The perimeter is 108 cm. What is the width, in cm?
A18
B19
C35
D54
AnswerB — 19
Step-by-step
  1. Let the width be w.
  2. Length = 2w − 3.
  3. Perimeter: 2w + 2(2w − 3) = 108.
  4. So 6w − 6 = 108 and w = 19.
  5. Length = 35.
Quick check2(35) + 2(19) = 108.
Common mistakes
  • A (18): ignored the 3 cm
  • C (35): gave the length
  • D (54): gave half the perimeter

Number of solutions

Method. Compare x-coefficients first, then constants.

Worked example
Which equation has no solution?
A4(x − 3) = 4x − 12
B4(x − 3) = 3x − 10
C4(x − 3) = 3x − 9
D4(x − 3) = 4x − 10
AnswerD — 4(x − 3) = 4x − 10
Step-by-step
  1. Distribute the left side to get 4x − 12.
  2. Equal x-coefficients with different constants give no solution.
  3. Identical sides give infinitely many.
  4. Different x-coefficients give exactly one.
  5. 4(x − 3) = 4x − 10 has no solution.
Quick checksubtracting 4x from both sides of 4(x − 3) = 4x − 10 leaves a false statement.
Common mistakes
  • A (4(x − 3) = 4x − 12): chose an equation that has infinitely many solutions
  • B (4(x − 3) = 3x − 10): chose an equation that has exactly one solution
  • C (4(x − 3) = 3x − 9): chose an equation that has exactly one solution

Parameters — no solution

Method. No solution ⇔ same x-coefficient on both sides and different constants.

Worked example
For what value of k does the equation kx − 7 = −9x + 7 have no solution?
A−9
B0
C9
D14
AnswerA — −9
Step-by-step
  1. Collect x-terms: (k − (−9))x = 14.
  2. Since 14 ≠ 0, there is no solution exactly when the x-coefficient is 0: k = −9.
Quick checkwith k = −9 the equation is −9x − 7 = −9x + 7, which simplifies to −7 = 7, false.
Common mistakes
  • B (0): thought k = 0 makes the equation have no solution
  • C (9): changed the sign of the coefficient
  • D (14): set k equal to the difference of the constants

Linear Inequalities

Solve like an equation, but reverse the sign when you multiply or divide by a negative number. A compound 'and' inequality is a single interval; an 'or' inequality is two pieces. A two-variable inequality is a half-plane: test a point to decide which side is shaded; a solid boundary means ≤ or ≥.

Key formulas
Flip rule
Compound (and)
Compound (or)
Absolute value (less than)
Absolute value (greater than)
Two variables
Test a point

Solving inequalities

Method. Solve it like an equation; the sign flips only when you multiply or divide by a negative number.

Worked example
Solve: 4x − 1 ≥ 11
Ax ≤ 3
Bx ≥ 3
Cx ≥
Dx > 3
AnswerB — x ≥ 3
Step-by-step
  1. Add 1 on both sides: 4x ≥ 12.
  2. Divide by 4 (positive, so the sign stays): x ≥ 3.
Quick checkx = 4 works (4(4) − 1 = 15, which is ≥ 11).
Common mistakes
  • A (x ≤ 3): reversed the inequality sign without a reason
  • C (x ≥ ): subtracted the constant instead of adding it
  • D (x > 3): changed whether the endpoint is included

Solving inequalities — negative coefficient

Method. Dividing (or multiplying) both sides by a negative number reverses the inequality.

Worked example
Solve: −4x + 13 ≥ 53
Ax ≥ −10
Bx ≤ 10
Cx ≥ 10
Dx ≤ −10
AnswerD — x ≤ −10
Step-by-step
  1. Subtract 13: −4x ≥ 40.
  2. Divide by −4 and reverse the sign (dividing by a negative): x ≤ −10.
Quick checkx = −11 should work: −4(−11) + 13 = 57, which is ≥ 53.
Common mistakes
  • A (x ≥ −10): forgot to reverse the sign when dividing by a negative number
  • B (x ≤ 10): dropped the negative sign of the coefficient but still reversed the sign
  • C (x ≥ 10): divided by the positive number instead of the negative one

Testing solutions of inequalities

Method. Substitute each choice, or solve once and compare.

Worked example
Which value of x is a solution of 9x − 14 < −77?
A−8
B−7
C−6
D−2
AnswerA — −8
Step-by-step
  1. Solve: 9x < −63.
  2. So x < −7.
  3. Only −8 satisfies x < −7.
Quick check9(−8) − 14 = −86, which is < −77.
Common mistakes
  • B (−7): chose the boundary value, which is not included
  • C (−6): chose a value on the wrong side of the boundary
  • D (−2): chose a value on the wrong side of the boundary

Inequalities with variables on both sides

Method. Collect x on one side; watch for dividing by a negative.

Worked example
Solve: 7x + 12 ≤ −4x + 67
Ax ≥ 5
Bx ≤
Cx ≤ 5
Dx ≤
AnswerC — x ≤ 5
Step-by-step
  1. Move the x-terms to the left: 11x ≤ 55.
  2. Divide by 11: x ≤ 5.
Quick checkat x = 5 both sides equal 47, so 5 is the boundary; test x = 4 to confirm the direction.
Common mistakes
  • A (x ≥ 5): reversed the sign without dividing by a negative
  • B (x ≤ ): added the x-terms instead of subtracting
  • D (x ≤ ): used the wrong sign when moving the constant

Compound inequalities — and

Method. Treat the middle as the target and apply each step to all three parts.

Worked example
Solve: −3 < −2x + 1 < 11
A− < x <
B−5 < x < 2
C−4 < x < 10
D−5 ≤ x ≤ 2
AnswerB — −5 < x < 2
Step-by-step
  1. Do the same thing to all three parts.
  2. Subtract 1: −4 < −2x < 10.
  3. Divide by −2 and reverse both signs: −5 < x < 2.
Quick checkthe endpoints come from −2x + 1 = −3 and −2x + 1 = 11: x = 2 and x = −5.
Common mistakes
  • A (− < x < ): divided all three parts but did not subtract the constant
  • C (−4 < x < 10): subtracted the constant but did not divide
  • D (−5 ≤ x ≤ 2): switched which endpoints are included

Greatest or least integer solution

Method. Solve, then step to the nearest integer on the allowed side (exclude the boundary for < or >).

Worked example
What is the least integer x that satisfies 8x − 18 ≥ 174?
A20
B23
C24
D25
AnswerC — 24
Step-by-step
  1. 8x ≥ 192.
  2. So x ≥ 24.
  3. The least integer that works is 24.
Quick check8(24) − 18 = 174 ≥ 174 ✓, but x = 23 gives 166, which fails.
Common mistakes
  • A (20): subtracted 18 from 174 instead of adding it (8x ≥ 156, so x ≥ 19.5, least integer 20)
  • B (23): took the integer just below the boundary, which does not satisfy the inequality
  • D (25): treated ≥ as >, so excluded x = 24

Inequality word problems

Method. Subtract the fixed fee, divide by the price, and round DOWN.

Worked example
A fair charges an entry fee of $17 and $9.50 per ride. Sam can spend at most $120. What is the greatest number of rides he can pay for?
A10
B11
C12
D14
AnswerA — 10
Step-by-step
  1. Let n be the number of rides: 17 + 9.5n ≤ 120.
  2. Then 9.5n ≤ 103.
  3. So n ≤ ≈ 10.84.
  4. The greatest whole number is 10.
Quick check10 rides cost $112.00 ≤ $120.00, but 11 cost $121.50.
Common mistakes
  • B (11): rounded up instead of down
  • C (12): ignored the one-time fee
  • D (14): added the fee to the budget

Two-variable inequalities — solutions

Method. Points that satisfy it lie below the line y = 3x + 1.

Worked example
Which point is a solution of y < 3x + 1?
A(1, 4)
B(0, 4)
C(−3, −1)
D(−1, −4)
AnswerD — (−1, −4)
Step-by-step
  1. Substitute the point.
  2. For (−1, −4), 3(−1) + 1 = −2, and y = −4 < −2 ✓.
Quick checkeach other choice gives a false statement when substituted.
Common mistakes
  • A ((1, 4)): chose a point on the boundary line, which is not included
  • B ((0, 4)): chose a point above the line
  • C ((−3, −1)): chose a point above the line

Compound inequalities — or

Method. “Or” keeps everything from both parts; “and” keeps only the overlap.

Worked example
Solve: 2x + 9 < 1 or 3x − 6 > 0
A−4 < x < 2
Bx > −4 or x < 2
Cx < −4 or x > 2
Dx ≤ −4 or x ≥ 2
AnswerC — x < −4 or x > 2
Step-by-step
  1. Solve each part.
  2. 2x + 9 < 1 gives x < −4.
  3. 3x − 6 > 0 gives x > 2.
  4. With “or”, the solution is either part: x < −4 or x > 2.
Quick checkx = −5 satisfies the first part and x = 3 satisfies the second; x = −3 satisfies neither.
Common mistakes
  • A (−4 < x < 2): took the values between the endpoints instead of outside them
  • B (x > −4 or x < 2): reversed both inequality signs
  • D (x ≤ −4 or x ≥ 2): included the endpoints

Two-variable inequalities — graphs

Method. Line: read the y-intercept and slope. Dashed → < or >; solid → ≤ or ≥. Above → y >; below → y <.

Worked example
Which inequality is shown by the graph? (The shaded region is the solution set.)
Figure for the worked example
Ay ≥ x − 3
By < x − 3
Cy > −x − 3
Dy > x − 3
AnswerD — y > x − 3
Step-by-step
  1. The boundary passes through (0, −3) with slope 1.
  2. So it is y = x − 3.
  3. It is dashed (not included) and the shading is above the line: y > x − 3.
Quick checkthe test point (0, −1) is in the shaded region and satisfies y > x − 3.
Common mistakes
  • A (y ≥ x − 3): misread the dashed/solid boundary line
  • B (y < x − 3): chose the wrong side of the line
  • C (y > −x − 3): used the wrong sign for the slope

Systems of linear inequalities

Method. A solution of a system must satisfy every inequality; test each choice in both.

Worked example
Which point is a solution of the system y ≥ 3x − 2 and y ≥ x − 3?
A(−1, −5)
B(2, 0)
C(−3, 1)
D(4, −5)
AnswerC — (−3, 1)
Step-by-step
  1. Test (−3, 1) in both.
  2. 1 ≥ −11 ✓ and 1 ≥ −6 ✓.
Quick checkeach other choice fails at least one of the two inequalities.
Common mistakes
  • A ((−1, −5)): checked only the first inequality
  • B ((2, 0)): checked only the second inequality
  • D ((4, −5)): chose a point that satisfies neither inequality

Function Notation

f(a) is the output when the input is a; solving f(x) = k asks for the inputs that give output k. Read values from graphs and tables, and find the domain and range from the graph or the formula.

Key formulas
Evaluate
Solve
Composition
Domain
Piecewise

Finding the rule

Method. Test each choice on ALL pairs, not just the first one.

Worked example
Which rule turns each input into its output? Input: 1, 3, 9. Output: 3, 7, 19.
AAdd 4
BAdd 1, then multiply by 2
CMultiply by 2, then add 1
DMultiply by 3
AnswerC — Multiply by 2, then add 1
Step-by-step
  1. Test the rule on every pair.
  2. 1 → 1 × 2 + 1 = 3.
  3. 3 → 3 × 2 + 1 = 7.
  4. 9 → 9 × 2 + 1 = 19.
  5. All three pairs match.
Quick checkthe input 9 gives 9 × 2 + 1 = 19, the last output ✓.
Common mistakes
  • A (Add 4): used the change in the outputs as the rule
  • B (Add 1, then multiply by 2): did the operations in the wrong order
  • D (Multiply by 3): combined the two numbers into one multiplier

Recognizing functions

Method. Scan the x-values only: a repeated x with different y's means NOT a function.

Worked example
Which set of ordered pairs represents a function?
A{(0, −4), (7, 5), (−3, −3), (6, −1)}
B{(6, 9), (5, −5), (1, 7), (5, 8)}
C{(0, −2), (−5, 0), (2, −1), (2, −3)}
D{(−2, 5), (1, 8), (−3, −1), (−3, −2)}
AnswerA — {(0, −4), (7, 5), (−3, −3), (6, −1)}
Step-by-step
  1. A relation is a function when no input (x-value) is paired with two different outputs.
  2. In {(0, −4), (7, 5), (−3, −3), (6, −1)} the x-values 0, 7, −3, 6 are all different.
  3. So it is a function.
  4. Each of the other sets uses one x-value twice with different y-values.
Quick checkthe x-values of the answer, −3, 0, 6, 7, have no repeats ✓.
Common mistakes
  • B ({(6, 9), (5, −5), (1, 7), (5, 8)}): chose a set in which the input 5 has two different outputs
  • C ({(0, −2), (−5, 0), (2, −1), (2, −3)}): chose a set in which the input 2 has two different outputs
  • D ({(−2, 5), (1, 8), (−3, −1), (−3, −2)}): chose a set in which the input −3 has two different outputs

Linear versus nonlinear

Method. Equal steps in x must give equal changes in y for a linear function.

Worked example
A function has the values x: 0, 1, 2, 3, 4 and y: 3, 6, 12, 24, 48. Which statement is true?
ALinear, because the x-values increase by 1
BLinear, because y changes by 3 each time x increases by 1
CLinear, because y always increases
DNonlinear, because the changes in y (3, 6, 12, 24) are not constant
AnswerD — Nonlinear, because the changes in y (3, 6, 12, 24) are not constant
Step-by-step
  1. Find the change in y for each step of 1 in x: 6 − 3 = 3, 12 − 6 = 6, 24 − 12 = 12, 48 − 24 = 24.
  2. The changes are not all equal.
  3. So the function is nonlinear.
Quick checkthe changes in y are 3, 6, 12, 24 — not all the same ✓.
Common mistakes
  • A (Linear, because the x-values increase by 1): looked only at the x-values
  • B (Linear, because y changes by 3 each time x increases by 1): used only the first change in y
  • C (Linear, because y always increases): thought an increasing function must be linear

Function notation — solving f(x) = k

Method. f(x) = k asks for the INPUT; undo the operations in reverse order.

Worked example
If f(x) = −2x + 8, for what value of x is f(x) = 14?
A−20
B−15
C−11
D−3
AnswerD — −3
Step-by-step
  1. Set f(x) = 14: −2x + 8 = 14.
  2. Subtract 8: −2x = 6.
  3. Divide by −2: x = −3.
Quick checkf(−3) = −2(−3) + 8 = 14 ✓.
Common mistakes
  • A (−20): found f(14) instead of solving f(x) = 14
  • B (−15): divided before subtracting the constant
  • C (−11): moved the constant with the wrong sign

Vertical line test

Method. Vertical line test: two points on one vertical line → not a function.

Worked example
Does the graph shown represent y as a function of x?
Figure for the worked example
ANo, because some vertical line crosses the graph more than once
BYes, because every vertical line crosses the graph at most once
CNo, because some horizontal line crosses the graph more than once
DYes, because the graph is one connected curve
AnswerA — No, because some vertical line crosses the graph more than once
Step-by-step
  1. Use the vertical line test: y is a function of x when no vertical line meets the graph twice.
  2. The graph is a circle.
  3. The vertical line x = −1 meets it at two points.
  4. So it is NOT a function.
Quick checkthe x-value −1 has two different y-values on the graph ✓.
Common mistakes
  • B (Yes, because every vertical line crosses the graph at most once): checked only a vertical line outside the graph
  • C (No, because some horizontal line crosses the graph more than once): gave a horizontal-line reason
  • D (Yes, because the graph is one connected curve): thought any connected curve is a function

Nonlinear patterns

Method. If the changes grow by a constant amount, compare the outputs with the square numbers.

Worked example
The table shows a pattern. Input: 1, 2, 3, 4. Output: 4, 10, 20, 34. If the pattern continues, what is the output when the input is 8?
A34
B90
C106
D130
AnswerD — 130
Step-by-step
  1. The changes in output are 6, 10, 14, which grow by 4.
  2. So the rule involves squaring.
  3. Compare with the squares: 4 = 2 · + 2, 10 = 2 · + 2, 20 = 2 · + 2, 34 = 2 · + 2.
  4. The rule is output = 2(input)² + 2.
  5. For 8: 2× + 2 = 130.
Quick checkthe rule gives 4, 10, 20, 34 for inputs 1, 2, 3, 4 ✓.
Common mistakes
  • A (34): doubled the input instead of squaring it
  • B (90): continued with the last change in y as if the function were linear
  • C (106): added the next change in y once for every step

Function notation — evaluating

Method. Put negative inputs in parentheses; square before multiplying by the coefficient.

Worked example
If f(x) = 4 + 6x − 5, what is f(−4)?
A−93
B35
C83
D227
AnswerB — 35
Step-by-step
  1. Substitute x = −4 with parentheses: f(−4) = 4 + 6(−4) − 5.
  2. Square first: = 16.
  3. Then 64 − 24 − 5 = 35.
Quick check = 16 (a square is never negative), so f(−4) = 64 − 24 − 5 ✓.
Common mistakes
  • A (−93): squared −4 as −16
  • C (83): evaluated f(4) instead of f(−4)
  • D (227): multiplied by 4 before squaring

Reading key features from graphs

Method. Inputs are read on the x-axis, outputs on the y-axis.

Worked example
The graph of y = f(x) is shown, with a closed dot at each end. What is the domain of f?
Figure for the worked example
A−6 ≤ x ≤ 6
B−6 < x < 6
C−5 ≤ x ≤ 3
Dall real numbers
AnswerA — −6 ≤ x ≤ 6
Step-by-step
  1. The domain is the set of x-values the graph covers.
  2. The graph starts at x = −6 and ends at x = 6, with both endpoints included.
  3. So the domain is −6 ≤ x ≤ 6.
Quick checkthe left end is (−6, −5) and the right end is (6, 2) ✓.
Common mistakes
  • B (−6 < x < 6): left out the endpoints
  • C (−5 ≤ x ≤ 3): gave the y-values (range) instead of the x-values
  • D (all real numbers): assumed the graph continues forever

Piecewise functions

Method. First pick the piece whose condition the input satisfies (watch < versus ≤ at the boundary).

Worked example
The function f is defined by f(x) = −3x for x < 3, and f(x) = 3 − 5 for x ≥ 3. What is f(2)?
A−6
B1
C6
D7
AnswerA — −6
Step-by-step
  1. Decide which piece applies: x = 2 satisfies x < 3.
  2. So use f(x) = −3x.
  3. Substitute: f(2) = −3(2) = −6.
Quick checkthe other piece would give 7, but 2 does not satisfy its condition ✓.
Common mistakes
  • B (1): added the two pieces
  • C (6): made a sign error
  • D (7): used the wrong piece

Equations of Lines

Find the slope, then use a point to write the equation. In y = mx + b, m is the slope and b is the y-intercept. Parallel lines have equal slopes; perpendicular slopes are negative reciprocals.

Key formulas
Slope
Slope-intercept
Point-slope
Standard form
Parallel / perpendicular
Intercepts

Slope from two points

Method. Rise over run: change in y on top, change in x below, both in the same order.

Worked example
What is the slope of the line through (7, 12) and (−8, 3)?
A−15
B−
C−
D
AnswerD —
Step-by-step
  1. Slope = .
  2. Slope = = −.
  3. So Slope = .
Quick checkfrom (7, 12), moving −15 in x and −9 in y lands on (−8, 3).
Common mistakes
  • A (−15): added the coordinates instead of subtracting
  • B (−): divided run by rise and made a sign error
  • C (−): subtracted the coordinates in opposite orders

Slope from a graph

Method. The line rises from left to right, so the slope is positive; count rise ÷ run between the dots.

Worked example
What is the slope of the line shown? (The marked points have whole-number coordinates.)
Figure for the worked example
A−2
B
C2
D4
AnswerC — 2
Step-by-step
  1. The marked points are (−4, −4) and (0, 4).
  2. Slope = = 2.
Quick checkgoing right 1 from (−4, −4) the line goes up 2.
Common mistakes
  • A (−2): read the direction of the line the wrong way
  • B (): divided run by rise
  • D (4): gave the y-intercept instead of the slope

Slope as a rate of change

Method. The rate is the slope: Δ(amount)/Δ(time).

Worked example
A water tank is being filled. After 6 minutes the total is 150 liters; after 7 minutes it is 170 liters. What is the rate, in liters per minute?
A
B20
C
D25
AnswerB — 20
Step-by-step
  1. Rate = change in amount ÷ change in time.
  2. Rate = = .
  3. So Rate = 20 liters per minute.
Quick checkstarting from 150 and adding 20 for each of the 1 extra minutes gives 150 + 20 × 1 = 170.
Common mistakes
  • A (): divided minutes by liters
  • C (): divided the second amount by its time (ignored the starting amount)
  • D (25): divided the first amount by its time (ignored the starting amount)

Slope-intercept form — reading m and b

Method. Slope = number multiplying x; y-intercept = number standing alone (with its sign).

Worked example
What are the slope and the y-intercept of the line y = −x − 7?
Aslope −, y-intercept −7
Bslope −7, y-intercept −
Cslope −, y-intercept 7
Dslope , y-intercept −7
AnswerA — slope −, y-intercept −7
Step-by-step
  1. In y = mx + b, m is the coefficient of x and b is the constant term.
  2. Here m = − and b = −7.
Quick checkat x = 0, y = −7, so the line crosses the y-axis at (0, −7).
Common mistakes
  • B (slope −7, y-intercept −): swapped the slope and the y-intercept
  • C (slope −, y-intercept 7): changed the sign of the y-intercept
  • D (slope , y-intercept −7): changed the sign of the slope

Equation of a line from its graph

Method. Read b where the line meets the y-axis; count rise/run for m.

Worked example
Which equation represents the line shown?
Figure for the worked example
Ay = −3x + 2
By = x + 2
Cy = 3x − 2
Dy = 3x + 2
AnswerD — y = 3x + 2
Step-by-step
  1. The line crosses the y-axis at (0, 2).
  2. So b = 2.
  3. Between the marked points (0, 2) and (−1, −1) the slope is 3.
  4. Equation: y = 3x + 2.
Quick check(−1, −1) satisfies y = 3x + 2: 3(−1) + 2 = −1.
Common mistakes
  • A (y = −3x + 2): used the wrong sign for the slope
  • B (y = x + 2): used run over rise for the slope
  • C (y = 3x − 2): used the wrong sign for the y-intercept

Points on a line

Method. Plug each x-value into the equation and compare the y-value.

Worked example
Which point lies on the line y = 3x − 5?
A(1, 2)
B(2, 11)
C(2, 1)
D(2, −11)
AnswerC — (2, 1)
Step-by-step
  1. Substitute x = 2: y = 3(2) − 5 = 1.
  2. So (2, 1) is on the line.
Quick check1 = 3 × 2 − 5 ✓, so the point satisfies the equation.
Common mistakes
  • A ((1, 2)): swapped the coordinates
  • B ((2, 11)): used the wrong sign for the y-intercept
  • D ((2, −11)): used the wrong sign for the slope

Linear models — interpreting coefficients

Method. Slope = rate per unit of the input; intercept = value when the input is 0.

Worked example
The cost C, in dollars, for m months is C = 75m + 20. What does the number 75 represent?
Athe cost for each additional month
Bthe fixed cost charged before any time is used
Cthe total cost for one month
Dthe number of months that can be bought
AnswerA — the cost for each additional month
Step-by-step
  1. In C = 75m + 20, 75 multiplies m (dollars per month, the slope) and 20 is the cost when m = 0 (the intercept).
  2. So 75 is the cost for each additional month.
Quick checkwhen m increases by 1, C increases by 75; when m = 0, C = 20.
Common mistakes
  • B (the fixed cost charged before any time is used): mixed up the slope and the intercept
  • C (the total cost for one month): added the two numbers in the equation
  • D (the number of months that can be bought): confused the input with a coefficient

Midpoint

Method. Midpoint = average of the x's and average of the y's; to find an endpoint, go the same step again past the midpoint.

Worked example
What is the midpoint of the segment from (3, 5) to (−5, 6)?
A
B(−2, 11)
C
D
AnswerD —
Step-by-step
  1. Midpoint = .
  2. Midpoint = .
  3. So Midpoint = .
Quick checkthe average of (3, 5) and (−5, 6) is .
Common mistakes
  • A (): subtracted the coordinates instead of adding
  • B ((−2, 11)): forgot to divide by 2
  • C (): swapped the x- and y-coordinates

Point-slope form

Method. b = y₁ − m·x₁ = −3 − (2)(4) = −11.

Worked example
A line has slope 2 and passes through (4, −3). Which is its equation in slope-intercept form?
Ay = 2x + 5
By = 2x − 11
Cy = 2x + 11
Dy = 2x − 3
AnswerB — y = 2x − 11
Step-by-step
  1. Point-slope: y − (−3) = 2(x − 4).
  2. Distribute and solve for y: y = 2x − 8 − 3 = 2x − 11.
Quick check2(4) − 11 = −3 ✓, so the line passes through the given point.
Common mistakes
  • A (y = 2x + 5): used the wrong sign when solving for b
  • C (y = 2x + 11): solved for b with both signs reversed
  • D (y = 2x − 3): used the y-coordinate of the point as the y-intercept

Equation through two points

Method. Find m from the two points, then b from either point.

Worked example
Which equation describes the line through (2, 5) and (−2, 3)?
Ay = 2x + 1
By = −x + 6
Cy = x + 4
Dy = x + 6
AnswerC — y = x + 4
Step-by-step
  1. Slope: = .
  2. Then b = 5 − (2) = 4.
  3. Equation: y = x + 4.
Quick checkboth points satisfy the equation, e.g. (−2) + 4 = 3.
Common mistakes
  • A (y = 2x + 1): used run over rise for the slope
  • B (y = −x + 6): used the wrong sign for the slope
  • D (y = x + 6): used the wrong sign when solving for b

Slope from standard form

Method. For Ax + By = C the slope is −.

Worked example
What is the slope of the line −3x + y = −2?
A−3
B−2
C
D3
AnswerD — 3
Step-by-step
  1. Solve for y: add 3x to both sides to get y = 3x − 2.
  2. The slope is the coefficient of x: 3.
Quick checkusing − directly, − = 3.
Common mistakes
  • A (−3): forgot the negative sign in −
  • B (−2): gave the y-intercept instead of the slope
  • C (): used the reciprocal of the slope

Parallel lines

Method. Keep the slope; find the new b from the point.

Worked example
Which line passes through (−6, −3) and is parallel to y = x − 5?
Ay = x + 3
By = −x − 9
Cy = x − 5
Dy = x − 9
AnswerA — y = x + 3
Step-by-step
  1. Parallel lines have equal slopes: m = 1.
  2. b = −3 − (1)(−6) = 3.
  3. Equation: y = x + 3.
Quick check1(−6) + 3 = −3 ✓, and the slope matches 1.
Common mistakes
  • B (y = −x − 9): used the perpendicular slope
  • C (y = x − 5): copied the original line
  • D (y = x − 9): used the wrong sign when solving for b

Parallel and perpendicular — classifying

Method. Put both in y = mx + b and compare m (and b).

Worked example
How are the lines y = x − 6 and −2x + 5y = 10 related?
Aparallel
Bperpendicular
Cneither parallel nor perpendicular
Dthe same line
AnswerC — neither parallel nor perpendicular
Step-by-step
  1. Rewrite the second line: y = x + 2, slope , y-intercept 2.
  2. The first has slope , y-intercept −6.
  3. The slopes are not equal and do not multiply to −1: neither.
Quick checkthe product of the slopes is × = 1, and the intercepts are −6 and 2.
Common mistakes
  • A (parallel): thought the slopes were equal
  • B (perpendicular): thought the slopes multiply to −1
  • D (the same line): assumed the intercepts were equal as well

Intercepts of a line

Method. Cover-up method: hide the y-term to get the x-intercept, hide the x-term to get the y-intercept.

Worked example
What are the intercepts of the line 6x − y = 42?
Ax-intercept (−42, 0), y-intercept (0, 7)
Bx-intercept (−7, 0), y-intercept (0, 42)
Cx-intercept (7, 0), y-intercept (0, −42)
Dx-intercept (6, 0), y-intercept (0, −1)
AnswerC — x-intercept (7, 0), y-intercept (0, −42)
Step-by-step
  1. x-intercept: set y = 0, 6x = 42, x = 7.
  2. y-intercept: set x = 0, −y = 42, y = −42.
Quick check6(7) + (−1)(0) = 42 and 6(0) + (−1)(−42) = 42.
Common mistakes
  • A (x-intercept (−42, 0), y-intercept (0, 7)): swapped the two intercepts
  • B (x-intercept (−7, 0), y-intercept (0, 42)): made a sign error on both intercepts
  • D (x-intercept (6, 0), y-intercept (0, −1)): used the coefficients as the intercepts

Distance between two points

Method. Draw the right triangle: legs |Δx| and |Δy|, distance is the hypotenuse.

Worked example
What is the distance between (5, 3) and (17, 19)?
A20
B28
C400
D4
AnswerA — 20
Step-by-step
  1. d = .
  2. d = = .
  3. So d = 20.
Quick check = 400 = 144 + 256.
Common mistakes
  • B (28): added the horizontal and vertical distances
  • C (400): forgot the square root
  • D (4): subtracted the squares

Perpendicular lines

Method. Flip the slope and change its sign; then find b from the point.

Worked example
Which line passes through (10, −1) and is perpendicular to y = x + 6?
Ay = −x + 14
By = −x +
Cy = x − 16
Dy = x −
AnswerA — y = −x + 14
Step-by-step
  1. Perpendicular slopes are opposite reciprocals: − = −.
  2. b = −1 − (10) = 14.
  3. Equation: y = −x + 14.
Quick check × = −1 ✓ and the point gives (10) + 14 = −1 ✓.
Common mistakes
  • B (y = −x + ): used only the opposite sign (not the reciprocal)
  • C (y = x − 16): used only the reciprocal (not the opposite sign)
  • D (y = x − ): used the same slope (parallel, not perpendicular)

Polynomial Expressions

Combine like terms, distribute, and use the special-product patterns. To factor, take out the GCF first, then look for a trinomial pattern or a difference of squares. Check a factoring by multiplying back.

Key formulas
Square of a sum
Square of a difference
Difference of squares
FOIL
Trinomial

Combining like terms

Method. Only terms with exactly the same variable part can be combined; keep each sign with its term.

Worked example
Simplify: −6 − 5 + 3x + 7 + 2
A− + 2
B−4 + 3x + 2
C−8 + 3x + 2
D−4 + 3x − 12
AnswerB — −4 + 3x + 2
Step-by-step
  1. Group the terms: −6 and 2 make −4.
  2. Group the x-terms: 3x is the only x-term.
  3. Group the constants: −5 and 7 make 2.
  4. Write the result: −4 + 3x + 2.
Quick checkat x = 1 the original expression and −4 + 3x + 2 both equal 1.
Common mistakes
  • A (− + 2): combined and x terms as if they were like terms
  • C (−8 + 3x + 2): used the wrong sign for one term
  • D (−4 + 3x − 12): used the wrong sign for a constant

Distributive property

Method. Multiply the outside number by EVERY term inside, keeping the sign of the outside number.

Worked example
Simplify: 1(−7x + 2) + 3(6x + 7)
A11x + 9
B11x + 23
C−25x − 19
D−x + 9
AnswerB — 11x + 23
Step-by-step
  1. Distribute: 1(−7x + 2) = −7x + 2 and 3(6x + 7) = 18x + 21.
  2. Combine: 11x + 23.
Quick checkat x = 1 the original gives 34 and 11x + 23 gives 34.
Common mistakes
  • A (11x + 9): multiplied only the first term in the second parentheses by 3
  • C (−25x − 19): subtracted the second product instead of adding
  • D (−x + 9): ignored the numbers outside the parentheses

Multiplying a monomial by a polynomial

Method. Multiply coefficients and ADD exponents for each term.

Worked example
Simplify: −2x(3x + 9)
A−6 + 9
B−6x − 18
C−6 − 18x
D + 7x
AnswerC — −6 − 18x
Step-by-step
  1. −2x · 3x = −6 and −2x · 9 = −18x.
  2. So the product is −6 − 18x.
Quick checkat x = 1, −2x(3x + 9) = −2(12) = −24, and −6 − 18x gives −24.
Common mistakes
  • A (−6 + 9): multiplied only the first term by −2x
  • B (−6x − 18): forgot to multiply the x-powers
  • D ( + 7x): added the coefficients instead of multiplying

Adding and subtracting polynomials

Method. Line up like terms (, x, constants); with subtraction, change every sign in the second polynomial.

Worked example
Simplify: −
A− + 5
B− + 4x − 3
C−13 + 5
D− + 1
AnswerB — − + 4x − 3
Step-by-step
  1. Distribute the minus sign to every term of the second polynomial.
  2. Then combine like terms: − + 4x − 3.
Quick checkat x = 1 the original gives −4 − (−4) = 0, and − + 4x − 3 gives 0.
Common mistakes
  • A (− + 5): changed the sign of only the first term of the second polynomial
  • C (−13 + 5): added instead of subtracting
  • D (− + 1): combined the x-terms with the constants

Multiplying binomials

Method. First, Outer, Inner, Last — then combine the two middle terms.

Worked example
Expand: (3x − 2)(2x − 7)
A6 + 14
B6 − 17x + 14
C6 − 25x − 14
D6 − 25x + 14
AnswerD — 6 − 25x + 14
Step-by-step
  1. FOIL: first 3x·2x = 6.
  2. Outer 3x·(−7) = −21x.
  3. Inner −2·2x = −4x.
  4. Last −2·(−7) = 14.
  5. Total: 6 − 25x + 14.
Quick checkCheck with x = 1: (1)(−5) = −5 and 6(1) − 25(1) + 14 = −5.
Common mistakes
  • A (6 + 14): multiplied only the first terms and the last terms
  • B (6 − 17x + 14): subtracted the outer and inner products
  • C (6 − 25x − 14): made a sign error on the last term

Special products

Method. Use the patterns = ± 2pq + and (p + q)(p − q) = − .

Worked example
Expand:
A + 4
B − 2x + 4
C − 4x + 4
D + 4x + 4
AnswerC — − 4x + 4
Step-by-step
  1. = + 2pq + with p = x, q = −2.
  2. + 2(x)(−2) + 4 = − 4x + 4.
Quick checkat x = 1 the original gives 1 and − 4x + 4 gives 1.
Common mistakes
  • A ( + 4): squared each term and forgot the middle term
  • B ( − 2x + 4): used ab instead of 2ab for the middle term
  • D ( + 4x + 4): used the wrong sign for the middle term

Factoring — greatest common factor

Method. Find the largest number and the lowest power of x that divide every term.

Worked example
Factor completely: 9 + 18 − 6
A3
B3
C3(3x + 6)
D3
AnswerA — 3
Step-by-step
  1. Every term contains 3: 9 + 18 − 6 = 3.
  2. The trinomial 3 + 6x − 2 has no common factor left.
Quick checkdistribute 3 back to get 9 + 18 − 6.
Common mistakes
  • B (3): factored out only the number, not the variable
  • C (3(3x + 6)): factored 3 out of the first two terms and dropped the −6 term
  • D (3): did not divide the last term by 3

Factoring trinomials (leading coefficient 1)

Method. Product = c, sum = b; the signs of c and b tell you the signs of the two numbers.

Worked example
Factor: − 18x + 81
A(x + 9)(x + 9)
B(x − 9)(x + 9)
C(x − 9)(x − 9)
D(x + 3)(x + 27)
AnswerC — (x − 9)(x − 9)
Step-by-step
  1. Find two numbers with product 81 and sum −18: −9 and −9.
  2. So − 18x + 81 = (x − 9)(x − 9).
Quick check(x − 9)(x − 9) = + (−9 + (−9))x + (−9)(−9) = − 18x + 81.
Common mistakes
  • A ((x + 9)(x + 9)): used the wrong signs in both factors
  • B ((x − 9)(x + 9)): used the wrong sign in one factor
  • D ((x + 3)(x + 27)): chose a factor pair of 81 that does not add to −18

Factoring — difference of squares

Method. − = (p + q)(p − q); take out any common factor first.

Worked example
Factor completely: 16 − 25
A(4x + 5)(4x − 5)
B(4x − 5)(4x − 5)
C(4x + 5)(4x + 5)
D(16x + 5)(x − 5)
AnswerA — (4x + 5)(4x − 5)
Step-by-step
  1. 16 − 25 = − .
  2. So it factors as (4x + 5)(4x − 5).
Quick check(4x + 5)(4x − 5) = 16 − 25.
Common mistakes
  • B ((4x − 5)(4x − 5)): wrote a perfect square instead of a difference of squares
  • C ((4x + 5)(4x + 5)): used + in both factors
  • D ((16x + 5)(x − 5)): did not take the square root of the coefficient

Factoring trinomials (leading coefficient ≠ 1)

Method. Check the outer and inner products of each candidate against the middle coefficient.

Worked example
Factor: 18 + 9x − 5
A(6x − 1)(3x + 5)
B(6x − 5)(3x + 1)
C(6x + 5)(3x − 1)
D(6x + 5)(3x + 1)
AnswerC — (6x + 5)(3x − 1)
Step-by-step
  1. Use the ac-method: a·c = 18 × (−5) = −90.
  2. Find two numbers with product −90 and sum 9: −6 and 15.
  3. Split the middle term and group: 18 − 6x + 15x − 5 = 6x(3x − 1) + 5(3x − 1) = (6x + 5)(3x − 1).
Quick checkouter 6·(−1) + inner 5·3 = −6 + 15 = 9 ✓.
Common mistakes
  • A ((6x − 1)(3x + 5)): placed the constants in the wrong factors
  • B ((6x − 5)(3x + 1)): used the wrong signs in both factors
  • D ((6x + 5)(3x + 1)): used the wrong sign in one factor

Factoring by grouping

Method. Pair the terms, factor each pair, then factor out the common binomial.

Worked example
Factor: 2 − 7 + 12x − 42
A(2x + 7)
B(2x − 7)
C(2x − 7)
D(2x − 7)(x + 6)
AnswerC — (2x − 7)
Step-by-step
  1. Group the first two terms and the last two terms: + (12x − 42).
  2. Factor out of the first group and 6 out of the second: (2x − 7) + 6(2x − 7).
  3. Factor out the common binomial (2x − 7): (2x − 7).
Quick check(2x − 7) expands to 2 − 7 + 12x − 42.
Common mistakes
  • A ((2x + 7)): made a sign error when factoring the first group
  • B ((2x − 7)): made a sign error when factoring the second group
  • D ((2x − 7)(x + 6)): wrote x instead of in the common factor

Quadratic Equations

Get 0 on one side, then factor and set each factor equal to 0. If there is no x-term, take square roots and remember both signs. Completing the square or the quadratic formula works when factoring does not.

Key formulas
Standard form
Zero-product property
Square-root method
Quadratic formula
Completing the square

Square-root equations x² = k

Method. = k (k > 0) always has two solutions, ±.

Worked example
Solve: = 25
Ax = 5
Bx = 25
Cx = ±10
Dx = ±5
AnswerD — x = ±5
Step-by-step
  1. Take the square root of both sides, remembering both signs.
  2. x = ±.
  3. So x = ±5.
Quick check = 25 and = 25.
Common mistakes
  • A (x = 5): forgot the negative square root
  • B (x = 25): did not take the square root
  • C (x = ±10): doubled the square root

Zero-product property

Method. Set each factor equal to 0; each root is the opposite of the number in its factor.

Worked example
Solve: (x − 8)(x − 3) = 0
Ax = −8 or x = −3
Bx = −3 or x = 8
Cx = 3 or x = 8
Dx = −8 or x = 3
AnswerC — x = 3 or x = 8
Step-by-step
  1. A product is 0 only when a factor is 0.
  2. x − 8 = 0 gives x = 8.
  3. x − 3 = 0 gives x = 3.
  4. So x = 3 or x = 8.
Quick checkat x = 8 the first factor is 0, so the product is 0.
Common mistakes
  • A (x = −8 or x = −3): used the numbers in the factors with their signs instead of the zeros
  • B (x = −3 or x = 8): changed the sign of only one root
  • D (x = −8 or x = 3): changed the sign of only the other root

Solving by factoring

Method. Get 0 on one side, factor, then set each factor to 0.

Worked example
Solve: − 13x + 30 = 0
Ax = −10 or x = −3
Bx = −3 or x = 10
Cx = 3 or x = 10
Dx = 1 or x = 30
AnswerC — x = 3 or x = 10
Step-by-step
  1. Factor: (x − 10)(x − 3) = 0, since 10 × 3 = 30 and 10 + 3 = 13.
  2. Zero-product property: x = 3 or x = 10.
Quick check + (−13)(10) + 30 = 0 ✓.
Common mistakes
  • A (x = −10 or x = −3): used the numbers from the factors without changing their signs
  • B (x = −3 or x = 10): made a sign error on one root
  • D (x = 1 or x = 30): chose a factor pair of 30 that does not add to −13

Square-root method

Method. Isolate the squared bracket, take the ± square root of both sides, then undo the shift inside the bracket.

Worked example
Solve: = 27
Ax = −6 ± 3
Bx = 6 + 3
Cx = −21 or x = 33
Dx = 6 ± 3
AnswerD — x = 6 ± 3
Step-by-step
  1. Take square roots: x − 6 = ± = ±3.
  2. Add 6 (move the constant): x = 6 ± 3.
Quick checksubstituting either root makes equal 27.
Common mistakes
  • A (x = −6 ± 3): used the wrong sign for h
  • B (x = 6 + 3): forgot the negative square root
  • C (x = −21 or x = 33): forgot to take the square root

Quadratic word problems — area

Method. Look for two numbers 10 apart whose product is 551: 19 and 29.

Worked example
A rectangle's length is 10 meters more than its width, and its area is 551 square meters. What is its length, in meters?
A19
B29
C39
D541
AnswerB — 29
Step-by-step
  1. Let w be the width: w(w + 10) = 551.
  2. So + 10w − 551 = 0.
  3. Factor: (w − 19)(w + 29) = 0.
  4. So w = 19 (a width cannot be negative).
  5. Length = 19 + 10 = 29.
Quick check19 × 29 = 551 and 29 − 19 = 10.
Common mistakes
  • A (19): gave the width
  • C (39): added the difference twice
  • D (541): subtracted the difference from the area

Solving by factoring (leading coefficient ≠ 1)

Method. Use the ac-method (or test rational roots ±(factors of c)/(factors of a)).

Worked example
Solve: 8 − 10x + 3 = 0
Ax = − or x = −
Bx = or x =
Cx = 1 or x = 3
Dx = or x =
AnswerB — x = or x =
Step-by-step
  1. Factor: (4x − 3)(2x − 1) = 0.
  2. Set each factor to 0: 4x − 3 = 0 gives x = .
  3. 2x − 1 = 0 gives x = .
Quick checkthe roots add to − = and multiply to = : and ✓.
Common mistakes
  • A (x = − or x = −): solved each factor with the wrong sign
  • C (x = 1 or x = 3): forgot to divide by the x-coefficient in each factor
  • D (x = or x = ): divided by the wrong coefficients

Completing the square

Method. Shortcut: + bx + c = 0 becomes = − c.

Worked example
Which equation is equivalent to + 6x − 22 = 0 after completing the square?
A = −13
B = 58
C = 31
D = 31
AnswerD — = 31
Step-by-step
  1. Move the constant: + 6x = 22.
  2. Half of 6 is 3, and = 9.
  3. Add it to both sides: + 6x + 9 = 31.
  4. Write the left side as a square: = 31.
Quick checkexpanding − 31 gives + 6x − 22.
Common mistakes
  • A ( = −13): added the constant instead of subtracting it
  • B ( = 58): used b instead of
  • C ( = 31): used the wrong sign inside the square

Quadratic word problems — projectile

Method. Set the height to 0, divide out the common factor, factor, and keep the positive root.

Worked example
A ball is thrown upward from a platform. Its height, in feet, after t seconds is h = −16 + 16t + 96. After how many seconds does it hit the ground?
A
B2
C3
D6
AnswerC — 3
Step-by-step
  1. Set h = 0: −16 + 16t + 96 = 0.
  2. Divide by −16: − t − 6 = 0, which factors as (t − 3)(t + 2) = 0.
  3. So t = 3 or t = −2.
  4. Time cannot be negative.
  5. So t = 3.
Quick checkh(3) = −16(9) + 16(3) + 96 = 0.
Common mistakes
  • A (): gave the time of maximum height
  • B (2): gave the negative root without its sign as a time
  • D (6): divided the starting height by 16

Systems of Linear Equations

Solve by substitution or elimination. Compare slopes to count solutions: different slopes give one solution, same slope with different intercepts gives none, and the same line gives infinitely many.

Key formulas
Elimination
Substitution
One solution
No solution (graphs)
Infinitely many (graphs)
No solution (coefficients)
Infinitely many (coefficients)

Systems — solving by graphing

Method. Look for the intersection point and read x first, then y.

Worked example
The graph shows the two lines of a system of linear equations. What is the solution of the system?
Figure for the worked example
A(1, 2)
B(0, −5)
C(0, 0)
D(2, 1)
AnswerD — (2, 1)
Step-by-step
  1. The solution is the point where the lines cross: (2, 1).
  2. Both lines pass through it: y = 3x − 5 and y = x.
Quick checkat x = 2, the first line gives 1 and the second gives 1; both equal y = 1.
Common mistakes
  • A ((1, 2)): read the coordinates in the wrong order
  • B ((0, −5)): gave where the first line crosses the y-axis
  • C ((0, 0)): gave where the second line crosses the y-axis

Systems — checking a solution

Method. Test each choice in BOTH equations; one failure rules it out.

Worked example
Which ordered pair is a solution of the system −3x + 2y = −25 and −2x + 3y = −30?
A(3, −8)
B(11, 4)
C(12, −2)
D(−8, 3)
AnswerA — (3, −8)
Step-by-step
  1. A solution must make both equations true.
  2. (3, −8): −3(3) + 2(−8) = −25 ✓ and −2(3) + 3(−8) = −30 ✓.
Quick checkevery other choice fails at least one of the two equations.
Common mistakes
  • B ((11, 4)): checked only the first equation
  • C ((12, −2)): checked only the second equation
  • D ((−8, 3)): swapped the coordinates of the solution

Systems — substitution

Method. When one equation already gives y, substitute it straight into the other.

Worked example
What is the solution (x, y) of the system y = 2x − 9 and −2x + 3y = 9?
A(9, 27)
B
C(9, 9)
D
AnswerC — (9, 9)
Step-by-step
  1. Substitute y = 2x − 9 into the second equation: −2x + 3(2x − 9) = 9.
  2. So 4x − 27 = 9.
  3. So x = 9.
  4. Then y = 2(9) − 9 = 9.
Quick check−2(9) + 3(9) = 9 ✓ and 2(9) − 9 = 9 ✓.
Common mistakes
  • A ((9, 27)): used the wrong sign for b when finding y
  • B (): used the wrong sign for the constant after substituting
  • D (): forgot to multiply b by 3 after substituting

Systems — elimination

Method. Scale the equations so one variable has opposite (or equal) coefficients, then add (or subtract).

Worked example
What is the solution (x, y) of the system −7x + 7y = 0 and 3x + 6y = 9?
A(−1, −1)
B(1, −1)
C(1, 1)
D(3, 3)
AnswerC — (1, 1)
Step-by-step
  1. Multiply the first equation by 6 and the second by 7.
  2. Then subtract to eliminate y: (−42 − 21)x = 0 − 63.
  3. So −63x = −63 and x = 1.
  4. Substitute into the first equation: −7(1) + 7y = 0.
  5. So y = 1.
Quick checkCheck both equations: −7(1) + 7(1) = 0 ✓ and 3(1) + 6(1) = 9 ✓.
Common mistakes
  • A ((−1, −1)): made a sign error when eliminating
  • B ((1, −1)): substituted x back with the wrong sign
  • D ((3, 3)): after using y = x, dropped the 6y term in the second equation (3x = 9, so x = y = 3)

Systems — number of solutions

Method. Compare slopes : different → one solution; same slope, different intercept → none; identical lines → infinitely many.

Worked example
How many solutions does the system 2x − 2y = 6 and −2x + 2y = −11 have?
Ainfinitely many solutions
Bexactly one solution
Cexactly two solutions
Dno solution
AnswerD — no solution
Step-by-step
  1. Compare the equations: the left sides are proportional (ratio −1) but the constants are not.
  2. So the lines are parallel — no solution.
Quick checkslope of the first line − = 1; slope of the second − = 1.
Common mistakes
  • A (infinitely many solutions): thought equal slopes always mean the same line
  • B (exactly one solution): thought different-looking equations must cross once
  • C (exactly two solutions): thought two lines can meet at two points

Systems — finding an expression directly

Method. Combine the equations so the coefficients of x and y become opposite; then divide.

Worked example
If 6x + y = −24 and 2x + 5y = −36, what is the value of x − y?
A−60
B−9
C−3
D3
AnswerD — 3
Step-by-step
  1. Subtract the second equation from the first: 4x − 4y = 12, which is 4(x − y) = 12.
  2. So x − y = 3.
  3. (Here x = −3 and y = −6.)
Quick checkx = −3, y = −6 satisfies both equations and gives x − y = 3.
Common mistakes
  • A (−60): added the equations but did not divide
  • B (−9): found x + y instead
  • C (−3): gave x only

Systems — parameter for no solution

Method. Same slope, different intercept ⇒ no solution: match the coefficient ratio.

Worked example
In the system −4x + 6y = 1 and kx + 24y = 8, k is a constant. For what value of k does the system have no solution?
A−32
B−16
C−4
D16
AnswerB — −16
Step-by-step
  1. No solution means parallel lines: the x- and y-coefficients must be in the same ratio while the constants are not.
  2. The y-coefficients give the ratio = 4.
  3. So k = 4 × (−4) = −16.
  4. The constants 8 and 4 × 1 = 4 differ.
  5. So the lines are parallel.
Quick checkwith k = −16, the second left side is 4 times the first (4 × (−4) = −16, 4 × 6 = 24), but 8 ≠ 4 × 1 = 4, so the lines are parallel.
Common mistakes
  • A (−32): scaled using the constants instead of the y-coefficients
  • C (−4): matched the coefficient without scaling
  • D (16): made a sign error in the matching coefficient

Systems — parameter for infinitely many solutions

Method. Infinitely many solutions ⇔ one equation is a constant multiple of the other.

Worked example
In the system 5x + 5y = −4 and 25x + 25y = c, c is a constant. For what value of c does the system have infinitely many solutions?
A−20
B−4
C1
D20
AnswerA — −20
Step-by-step
  1. The second equation must be a multiple of the first.
  2. Its x-coefficient is 25 = 5 × 5.
  3. So the factor is 5 and c = 5 × (−4) = −20.
Quick checkmultiplying 5x + 5y = −4 through by 5 gives 25x + 25y = −20, the same line.
Common mistakes
  • B (−4): did not scale the constant
  • C (1): added the scale factor instead of multiplying
  • D (20): made a sign error when scaling

Systems — word problems (two totals)

Method. If all 109 were child tickets they would bring $1,635.00; each adult ticket adds $5.00, so adults = ($1,935.00 − $1,635.00) ÷ $5.00 = 60.

Worked example
A theater sold 109 tickets for a total of $1,935.00. Adult tickets cost $20.00 and child tickets cost $15.00. How many adult tickets were sold?
A20
B49
C60
D109
AnswerC — 60
Step-by-step
  1. Let a = adult tickets and c = child tickets: a + c = 109 and 20a + 15c = 1935.
  2. Substitute c = 109 − a: 20a + 15(109 − a) = 1935.
  3. So 5a + 1635 = 1935, 5a = 300 and a = 60.
  4. (c = 49.)
Quick check60 + 49 = 109 and 60 × $20.00 + 49 × $15.00 = $1,200.00 + $735.00 = $1,935.00 ✓.
Common mistakes
  • A (20): divided the extra $300.00 by the cheaper price ($15.00) instead of the price difference ($5.00)
  • B (49): found the number of child tickets instead
  • D (109): gave the total number of tickets