ISEE Upper Level · Mathematics · Unit 04 Mathematics Achievement

Mathematics Achievement: Unit Study Guide

04.01 Numbers and Operations

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers numbers and operations: integers, order of operations, factors, multiples and primes, exponents, roots and scientific notation.

Real Numbers and Integers

Real numbers are rational (fractions of integers, terminating or repeating decimals) or irrational. Know the sign rules, absolute value, and the properties of operations.

Key formulas
Order of operations
Sign rule (× and ÷)
Absolute value
Distance on a number line
Commutative
Associative
Distributive
|x| = k (k > 0)

Odd and even — parity rules

Method. Test with small numbers: a = 2, b = 2 gives 2a + b = 6, which is even; check one more pair to be sure.

Worked example
If a is an even whole number and b is an even whole number, which expression must be even?
A2b + 1
Ba + 1
Ca + 3
D2a + b
AnswerD — 2a + b
Step-by-step
  1. Use the rules: even ± even = even, odd ± odd = even, odd ± even = odd.
  2. Even × anything = even, odd × odd = odd.
  3. Here a is even and b is even.
  4. So 2a + b is always even.
Quick checkWith a = 4 and b = 4: 2a + b = 12, also even.
Common mistakes
  • A (2b + 1): chose an expression that is always odd
  • B (a + 1): chose an expression that is always odd
  • C (a + 3): chose an expression that is always odd

Integer expression — order of operations

Method. Find both products with their signs, then change the subtraction to adding the opposite: −20 + 24 = 4.

Worked example
What is −5 × 4 − 4 × (−6)?
A−44
B4
C44
D144
AnswerB — 4
Step-by-step
  1. Multiply first: −5 × 4 = −20 and 4 × (−6) = −24.
  2. Then subtract: −20 − (−24) = 4.
Quick checkCheck by adding back: 4 + (−24) = −20, the first product.
Common mistakes
  • A (−44): got the sign of the second product wrong
  • C (44): got the sign of the first product wrong
  • D (144): worked from left to right instead of multiplying first

Absolute value — evaluate

Method. Absolute value is never negative: simplify inside, drop the sign, then do the outside operation.

Worked example
What is |−14| − |2 − 6|?
A−18
B10
C18
D56
AnswerB — 10
Step-by-step
  1. Work inside the bars first: |−14| = 14 and |2 − 6| = |−4| = 4.
  2. Then 14 − 4 = 10.
Quick checkCheck by adding back: 10 + 4 = 14, which is |−14|.
Common mistakes
  • A (−18): treated |−14| as −14
  • C (18): treated |2 − 6| as −4
  • D (56): multiplied instead of subtracting

Coordinate plane — distance on a grid line

Method. Opposite signs → add the sizes: 3 + 4 = 7.

Worked example
What is the distance between the points (−6, 3) and (−6, −4)?
A1
B7
C8
D13
AnswerB — 7
Step-by-step
  1. The x-coordinates are equal.
  2. So the points lie on a vertical line.
  3. The distance is the absolute value of the difference of the other coordinates: |3 − (−4)| = 7.
Quick checkCount from −4 to 3: 7 units.
Common mistakes
  • A (1): subtracted the sizes, ignoring that the points are on opposite sides of an axis
  • C (8): counted the grid points instead of the spaces between them
  • D (13): added the coordinate that stays the same

Evaluate an expression with a negative number

Method. Put every negative value in parentheses before squaring or multiplying.

Worked example
If x = −7, what is the value of − 4x?
A−21
B21
C77
D121
AnswerC — 77
Step-by-step
  1. Substitute with parentheses.
  2. − 4 × (−7) = 49 − (−28).
  3. − 4 × (−7) = 49 + 28.
  4. So − 4 × (−7) = 77.
Quick check is positive (49) and −4x is positive (28); their sum is 77.
Common mistakes
  • A (−21): computed as a negative number
  • B (21): used x as positive in the second term
  • D (121): subtracted before squaring

Rational and irrational numbers

Method. Rational = fraction of integers (includes integers, terminating and repeating decimals, square roots of perfect squares). Irrational = non-ending, non-repeating decimal.

Worked example
Which number is irrational?
A
B−2
C9 +
D0.18
AnswerC — 9 +
Step-by-step
  1. A rational number can be written as a fraction of integers.
  2. Terminating and repeating decimals and square roots of perfect squares are rational.
  3. 9 + cannot be written that way (its decimal never ends or repeats).
  4. So it is irrational.
Quick checkClassify every choice; exactly one is irrational: 9 + .
Common mistakes
  • A (): chose a square root of a perfect square, which is a whole number
  • B (−2): chose a negative integer, which is rational
  • D (0.18): chose a terminating decimal, which is rational

Absolute value equation

Method. The solutions are 3 units on either side of −7: −7 ± 3.

Worked example
What is the greater solution of |x − (−7)| = 3?
A−10
B−7
C−4
D10
AnswerC — −4
Step-by-step
  1. |x − (−7)| = 3 means x − (−7) = 3 or x − (−7) = −3.
  2. So x = −4 or x = −10.
  3. The greater one is −4.
Quick checkSubstitute to check: |−4 − (−7)| = |3| = 3, the right side.
Common mistakes
  • A (−10): gave the other solution
  • B (−7): gave the centre value instead of a solution
  • D (10): read x − (−7) as x − 7 and solved x − 7 = 3, giving 10

Absolute value inequality

Method. 'Less than' → between (an 'and' interval); 'greater than' → outside (an 'or' pair). Centre 1, radius 9.

Worked example
Which describes all solutions of |x − 1| > 9?
A−8 < x < 10
Bx < −8 or x > 10
Cx < −9 or x > 9
Dx > 10
AnswerB — x < −8 or x > 10
Step-by-step
  1. |x − 1| > 9 means x is more than 9 units from 1: x − 1 < −9 or x − 1 > 9.
  2. Add 1: x < −8 or x > 10.
Quick checkTest x = 1: |0| = 0 is not greater than 9, so 1 is not a solution — consistent with x < −8 or x > 10.
Common mistakes
  • A (−8 < x < 10): reversed the inequality (gave the inside instead of the outside)
  • C (x < −9 or x > 9): ignored the shift by 1
  • D (x > 10): kept only one of the two inequalities

Number properties — closure

Method. To reject an 'always' statement, one counterexample is enough; try 0, 1, −1, a fraction and .

Worked example
Which statement is always true?
AThe sum of a rational number and an irrational number is always irrational.
BThe quotient of two integers is always an integer.
CThe difference of two whole numbers is always a whole number.
DThe sum of two irrational numbers is always irrational.
AnswerA — The sum of a rational number and an irrational number is always irrational.
Step-by-step
  1. 'The sum of a rational number and an irrational number is always irrational.' holds for every choice of numbers.
  2. Each other statement has a counterexample.
Quick checkEach false choice fails for at least one simple pair of numbers (see the error notes).
Common mistakes
  • B (The quotient of two integers is always an integer.): trusted a rule that fails: 1 ÷ 2 = is not an integer
  • C (The difference of two whole numbers is always a whole number.): trusted a rule that fails: 2 − 5 = −3 is not a whole number
  • D (The sum of two irrational numbers is always irrational.): trusted a rule that fails: + = 0 is rational

Absolute value in algebra — simplify

Method. Try a number: x = −3 gives x − 3|x| = −12, and 4x also gives −12.

Worked example
If x < 0, which expression is equal to x − 3|x|?
A−2x
B−4x
Cx
D4x
AnswerD — 4x
Step-by-step
  1. When x < 0, |x| = −x.
  2. Substitute: x − 3(−x) = 4x.
Quick checkCheck with x = −5: x − 3|x| = −20 and 4x = −20.
Common mistakes
  • A (−2x): used |x| = x even though x < 0
  • B (−4x): got the sign of the whole result wrong
  • C (x): dropped the |x| term

Factors, Multiples and Primes

A prime has exactly two factors, 1 and itself. Break numbers into primes to find the greatest common factor (shared primes) and the least common multiple (every prime to its highest power). Divisibility rules save time.

Key formulas
Prime factorization
GCF
LCM
GCF × LCM
Divisible by 3 or 9
Divisible by 4

Primes — which is prime

Method. Test the small primes 2, 3, 5, 7 only (any composite below 100 has one of them as a factor): digit sum for 3, last digit for 2 and 5, and 7 by trial.

Worked example
Which of these numbers is prime?
A39
B43
C85
D93
AnswerB — 43
Step-by-step
  1. A prime has exactly two factors, 1 and itself.
  2. 43 has no factor other than 1 and 43.
  3. 85 = 5 × 17.
  4. 93 = 3 × 31.
  5. 39 = 3 × 13.
Quick checkCheck 43 ÷ 2, 3, 5, 7: none divides evenly.
Common mistakes
  • A (39): overlooked that 39 = 3 × 13
  • C (85): overlooked that 85 = 5 × 17
  • D (93): overlooked that 93 = 3 × 31

Primes — count the primes

Method. Cross out the evens and the multiples of 3, 5 and 7; what is left in the range are the primes.

Worked example
How many prime numbers are there from 50 to 60, including 50 and 60?
A1
B2
C3
D5
AnswerB — 2
Step-by-step
  1. List the primes in the range: 53, 59.
  2. That is 2 primes.
Quick checkEach listed number has no factor of 2, 3, 5 or 7 (except itself).
Common mistakes
  • A (1): left out a prime
  • C (3): counted a composite number as prime
  • D (5): counted every odd number as prime

Factors — how many factors

Method. Write the prime factorization, add 1 to each exponent, and multiply: (2+1) × (2+1) × (1+1) = 18.

Worked example
How many positive factors does 180 have?
A3
B9
C16
D18
AnswerD — 18
Step-by-step
  1. List them in pairs: 1, 2, 3, 4, 5, 6, 9, 10, 12, 15, 18, 20, 30, 36, 45, 60, 90, 180.
  2. That is 18 factors.
Quick check18 = number of factor pairs (9) doubled.
Common mistakes
  • A (3): counted only the prime factors
  • B (9): counted factor pairs, not factors
  • C (16): left out 1 and the number itself

Prime factorization — write it

Method. Use a factor tree or divide by 2, 3, 5, 7 in order, writing each prime as you go.

Worked example
What is the prime factorization of 270?
A2 × × 5
B2 × × 5
C6 × × 5
D2 × ×
AnswerA — 2 × × 5
Step-by-step
  1. Divide by primes until you reach 1: 270 ÷ 2 = 135, 135 ÷ 3 = 45, 45 ÷ 3 = 15, 15 ÷ 3 = 5, 5 ÷ 5 = 1.
  2. So 270 = 2 × × 5.
Quick checkMultiply back: 2 × × 5 = 270.
Common mistakes
  • B (2 × × 5): left out one copy of a repeated prime
  • C (6 × × 5): used 6, which is not prime
  • D (2 × × ): used one factor of 5 too many

GCF/LCM — word problem

Method. LCM = 12 × 21 ÷ GCF = 252 ÷ 3 = 84.

Worked example
Tiles come in two lengths, 12 cm and 21 cm. What is the shortest length of a row that can be made using only 12 cm tiles and can also be made using only 21 cm tiles?
A3 cm
B33 cm
C84 cm
D252 cm
AnswerC — 84 cm
Step-by-step
  1. A row of 12 cm tiles only has a length that is a multiple of 12; a row of 21 cm tiles only has a length that is a multiple of 21.
  2. The length must be a common multiple of 12 and 21; the shortest is the LCM.
  3. 12 = × 3 and 21 = 3 × 7, so LCM(12, 21) = × 3 × 7 = 84 cm.
Quick checkBoth 12 and 21 divide 84.
Common mistakes
  • A (3 cm): found the GCF instead
  • B (33 cm): added the two numbers
  • D (252 cm): multiplied the two numbers

Distributive property — factor the GCF from an expression

Method. Find GCF of the numbers only (84 and 60) since 60 has no x.

Worked example
Which is the expression 84x + 60 written with its greatest common factor factored out?
A12(7x + 5)
B2(42x + 30)
C12(7x + 5x)
D12(8x + 5)
AnswerA — 12(7x + 5)
Step-by-step
  1. GCF(84, 60) = 12.
  2. 84x ÷ 12 = 7x and 60 ÷ 12 = 5.
  3. So 84x + 60 = 12(7x + 5).
Quick checkDistribute: 12 × 7x + 12 × 5 = 84x + 60.
Common mistakes
  • B (2(42x + 30)): factored out 2, which is not the greatest common factor
  • C (12(7x + 5x)): kept the variable in the second term
  • D (12(8x + 5)): divided the first term incorrectly

LCM — three numbers

Method. Build the LCM prime by prime (highest power of each): multiply those powers.

Worked example
What is the least common multiple of 2, 4 and 14?
A4
B28
C56
D112
AnswerB — 28
Step-by-step
  1. 2 = 2, 4 = , 14 = 2 × 7.
  2. Take the highest power of every prime: LCM = 28.
Quick check28 ÷ 2, 28 ÷ 4, 28 ÷ 14 are all whole numbers.
Common mistakes
  • A (4): used only two of the numbers
  • C (56): found a common multiple that is not the least
  • D (112): multiplied the three numbers

Number theory — units digit of a power

Method. Cycle 4, 6; use exponent mod 2 (0 means the last in the cycle).

Worked example
What is the units digit of ?
A0
B1
C4
D6
AnswerD — 6
Step-by-step
  1. The units digits of 4, , , … repeat in a cycle of length 2: 4, 6.
  2. 46 ÷ 2 leaves remainder 0.
  3. So the position is 2.
  4. So 6.
Quick checkCheck small even powers: = 16 and = 256 both end in 6, so (even exponent) ends in 6.
Common mistakes
  • A (0): thought powers of 4 end in 0, like powers of 10
  • B (1): treated like = 1 because 46 ÷ 2 leaves remainder 0
  • C (4): used the first position in the cycle (4) instead of the second

Factors — count from prime factorization

Method. Exponent-plus-one rule: 4 × 2 = 8.

Worked example
How many positive factors does the number × 7 have?
A3
B4
C6
D8
AnswerD — 8
Step-by-step
  1. Add 1 to each exponent and multiply.
  2. (3+1) × (1+1) = 8.
Quick checkThe number is 189, and listing its divisors gives 8.
Common mistakes
  • A (3): multiplied the exponents (forgot to add 1)
  • B (4): added the exponents
  • C (6): left out 1 and the number itself

Number theory — remainders and LCM

Method. LCM + remainder: 24 + 2.

Worked example
What is the least integer greater than 2 that leaves a remainder of 2 when divided by each of 8 and 12?
A22
B24
C26
D50
AnswerC — 26
Step-by-step
  1. The number minus 2 is a multiple of every divisor.
  2. So it is a multiple of LCM(8, 12) = 24.
  3. Least number = 24 + 2 = 26.
Quick check26 − 2 = 24, which each divisor divides.
Common mistakes
  • A (22): subtracted the remainder
  • B (24): forgot to add the remainder
  • D (50): found a number that works but is not the least

Exponents and Radicals

Exponents count repeated multiplication, and radicals undo powers. Most items test the exponent laws, powers of 10, and square roots.

Key formulas
Product rule
Quotient rule
Power rule
Power of a product
Zero exponent
Negative exponent
Fractional exponent
Product of roots
Rationalizing
Scientific notation

Exponent laws — product rule

Method. Multiply numbers, add exponents of the same base.

Worked example
Which expression is equal to 6 · 6?
A36
B36
C12
D12
AnswerB — 36
Step-by-step
  1. Multiply the coefficients: 6 × 6 = 36.
  2. Same base.
  3. So add the exponents: · = .
  4. Answer: 36.
Quick checkWrite it out: 9 factors of a times 3 factors of a is 12 factors of a.
Common mistakes
  • A (36): multiplied the exponents instead of adding them
  • C (12): added the coefficients instead of multiplying them
  • D (12): added the coefficients and multiplied the exponents

Exponent laws — quotient rule

Method. Divide numbers, subtract exponents (top minus bottom).

Worked example
Which expression is equal to 6 ÷ 3? (Assume y ≠ 0.)
A2
B3
C2
D2
AnswerD — 2
Step-by-step
  1. Divide the coefficients: 6 ÷ 3 = 2.
  2. Same base.
  3. So subtract the exponents: 13 − 5 = 8.
  4. Answer: 2.
Quick checkMultiply back: 2 · 3 = 6.
Common mistakes
  • A (2): added the exponents
  • B (3): subtracted the coefficients instead of dividing
  • C (2): subtracted the exponents in the wrong order

Exponent laws — power rule

Method. Power of a power: multiply exponents; the coefficient is raised to the power too.

Worked example
Which expression is equal to ?
A
B
C5
D
AnswerD —
Step-by-step
  1. = (multiply the exponents).
  2. Answer: .
Quick check means 5 copies of multiplied: that gives 4×5 = 20 factors of a.
Common mistakes
  • A (): added the exponents instead of multiplying
  • B (): raised the exponent to the power
  • C (5): multiplied by the power instead of raising to it

Negative exponents

Method. Flip the base, then make the exponent positive.

Worked example
What is ?
A−125
B
C
D125
AnswerB —
Step-by-step
  1. A negative exponent means the reciprocal.
  2. = 1 ÷ .
  3. So = .
Quick check × = 1, so is the reciprocal of .
Common mistakes
  • A (−125): made the answer negative instead of taking the reciprocal
  • C (): multiplied the base by the exponent in the denominator
  • D (125): ignored the negative sign in the exponent

Zero exponent

Method. Replace every (nonzero)⁰ by 1 first.

Worked example
What is 2 · + ?
A14
B15
C16
D42
AnswerC — 16
Step-by-step
  1. Any nonzero number to the power 0 is 1.
  2. So 2 · = 2 · 1 = 2.
  3. Then = 14.
  4. Sum: 2 + 14 = 16.
Quick check = ÷ = 1, so the first term is 2.
Common mistakes
  • A (14): treated the zero power as 0
  • B (15): treated the coefficient times the zero power as just 1
  • D (42): treated the zero power as the base

Exponent laws — numerical

Method. Add the exponents first, then evaluate one power.

Worked example
What is · ?
A−64
B
C1
D64
AnswerD — 64
Step-by-step
  1. Same base.
  2. So add the exponents: 3 + 3 = 6.
  3. = 64.
Quick check = 8 and = 8; their product is 64.
Common mistakes
  • A (−64): made the result negative
  • B (): used the opposite sign for the exponent
  • C (1): subtracted the exponents

Cube roots

Method. Memorise cubes –; a negative number has a negative cube root.

Worked example
What is ?
A−12
B12
C144
D576
AnswerB — 12
Step-by-step
  1. The cube root is the number that, used as a factor three times, gives 1728: 12 × 12 × 12 = 1728.
  2. So = 12.
Quick checkCheck by cubing: 12 × 12 × 12 = 1728, the number under the root.
Common mistakes
  • A (−12): gave the negative of the cube root; = −1728, not 1728
  • C (144): squared the root
  • D (576): divided by 3 instead of taking the cube root

Scientific notation — operations

Method. Work with the first factors and the powers of 10 separately, then make the first factor between 1 and 10.

Worked example
What is × ? Write the answer in scientific notation.
A3.91 ×
B1.31 ×
C3.91 ×
D3.91 ×
AnswerC — 3.91 ×
Step-by-step
  1. Multiply the first factors: 8.5 × 4.6 = 39.1.
  2. Add the exponents: × = .
  3. Rewrite 39.1 as 3.91 × : answer 3.91 × .
Quick checkEstimate with the first factors rounded: the size of the answer is about .
Common mistakes
  • A (3.91 × ): multiplied the exponents instead of adding them
  • B (1.31 × ): added the first factors instead of multiplying
  • D (3.91 × ): rewrote 39.1 as 3.91 but kept the exponent 1 instead of changing it to 2

Simplify square roots

Method. Divide 80 by perfect squares from largest to smallest (16, 9, 4, …) until one divides evenly.

Worked example
Which is in simplest form?
A2
B16
C4
D4 +
AnswerC — 4
Step-by-step
  1. Find the largest perfect square factor of 80: 80 = 16 × 5.
  2. Then = × = 4, and 5 has no square factor left.
Quick checkCheck by squaring: = 16 × 5 = 80, the number under the root.
Common mistakes
  • A (2): took out a square factor that is not the greatest, so it is not fully simplified
  • B (16): took out the perfect square without taking its square root
  • D (4 + ): split the root of a product into a sum of roots

Operations with radicals

Method. Simplify every root first; only roots with the same number under the sign can be added.

Worked example
What is + ?
A2
B6
C6
D8
AnswerC — 6
Step-by-step
  1. Simplify each root: = 4 and = 2.
  2. Now they are like radicals: 4 + 2 = 6.
Quick checkSquare the answer, or compare decimal values, to confirm it matches the expression.
Common mistakes
  • A (2): added the numbers under the root signs
  • B (6): added both the outside numbers and the radicands
  • D (8): multiplied the outside numbers after simplifying

Rationalize the denominator

Method. Use = a: multiply the top by and divide by 2.

Worked example
Which is equal to with a rational denominator?
A6
B3
C3
D
AnswerC — 3
Step-by-step
  1. Multiply top and bottom by .
  2. = 6.
  3. So = 3.
Quick check3 ≈ 4.2426 and ≈ 4.2426.
Common mistakes
  • A (6): multiplied only the top by the root
  • B (3): cancelled the root sign as if were 2
  • D (): divided under the root sign

Rational exponents

Method. Take the root first (smaller numbers), then the power; a negative exponent flips the result.

Worked example
What is ?
A
B2
C8
D
AnswerC — 8
Step-by-step
  1. The denominator 5 means a fifth root and the numerator 3 means a power.
  2. = (the fifth root of 32)³.
  3. = .
  4. So = 8.
Quick check = 32, so the fifth root of 32 is 2; then = 8.
Common mistakes
  • A (): took the reciprocal for no reason
  • B (2): took the root but ignored the power
  • D (): multiplied the base by the exponent

Exponent laws with fractional exponents

Method. The laws are the same for fraction exponents; add them with a common denominator.

Worked example
Which expression is equal to · ? (Assume y > 0.)
A
B
C
D
AnswerA —
Step-by-step
  1. Same base.
  2. So add the exponents: + = .
  3. Answer: .
Quick checkRename with denominator 10: = and = ; their sum is .
Common mistakes
  • B (): multiplied the exponents instead of adding them
  • C (): added the tops and the bottoms of the exponents
  • D (): subtracted the exponents

04.02 Fractions, Decimals and Percents

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers fractions, decimals and percents: operations, percent change and percent problems.

Fractions

A fraction names equal parts of a whole. Use a common denominator to compare, add or subtract; multiply straight across; divide by multiplying by the reciprocal. Always simplify the answer.

Key formulas
Equivalent fractions
Add / subtract
Multiply
Divide
Mixed number
Fraction of a number

Add — unlike denominators

Method. Butterfly method: = , then simplify to 1 .

Worked example
What is + ?
A
B
C
D1
AnswerD — 1
Step-by-step
  1. The least common denominator of 5 and 9 is 45.
  2. Rename: = and = .
  3. Add the tops: 27 + 35 = 62.
  4. So = 1 .
Quick checkEstimate: ≈ 0.60 and ≈ 0.78, sum ≈ 1.38; 1 ≈ 1.38.
Common mistakes
  • A (): used a common bottom number but did not rename the tops
  • B (): multiplied instead of adding
  • C (): added the tops and added the bottoms

Subtract — unlike denominators

Method. Butterfly method: = , which is already in lowest terms.

Worked example
What is − ?
A
B
C
D
AnswerA —
Step-by-step
  1. The least common denominator of 7 and 12 is 84.
  2. Rename: = and = .
  3. Subtract the tops: 48 − 35 = 13.
  4. So .
Quick checkAdd back: + = .
Common mistakes
  • B (): multiplied instead of subtracting
  • C (): cross-multiplied the tops but added the bottoms
  • D (): added instead of subtracting

Divide — fraction ÷ fraction

Method. Keep – change – flip: keep , change ÷ to ×, flip to 3.

Worked example
What is ÷ ?
A
B
C
D1
AnswerD — 1
Step-by-step
  1. Dividing by is the same as multiplying by its reciprocal 3.
  2. × 3 = = = 1 .
Quick checkMultiply back: 1 × = .
Common mistakes
  • A (): multiplied without flipping the second fraction
  • B (): added instead of dividing
  • C (): flipped the first number instead of the second

Add mixed numbers

Method. Change to improper fractions and add: + = 7 ; or add wholes and fractions separately and carry any extra whole.

Worked example
What is 3 + 3 ?
A6
B6
C7
D10
AnswerC — 7
Step-by-step
  1. Add the whole numbers: 3 + 3 = 6.
  2. Add the fractions with the common denominator 72: + = = 1 .
  3. Combine: 6 + 1 = 7 .
Quick checkEstimate: about 3 + 3 = 6, plus less than 2 from the fractions; 7 fits.
Common mistakes
  • A (6 ): did not carry the extra whole from the fraction part
  • B (6 ): added the whole numbers, then added the tops and added the bottoms
  • D (10 ): multiplied the whole numbers instead of adding them

Subtract mixed numbers (regrouping)

Method. Use improper fractions: − = 2 ; this avoids regrouping.

Worked example
What is 7 − 4 ?
A1
B2
C3
D3
AnswerB — 2
Step-by-step
  1. Rename with denominator 10: 7 − 4 .
  2. Since is less than , regroup one whole: 7 = 6 .
  3. Now subtract: 6 − 4 = 2 and − = .
  4. Answer: 2 .
Quick checkAdd back: 2 + 4 = 7 .
Common mistakes
  • A (1 ): subtracted both fraction parts
  • C (3 ): subtracted the smaller fraction from the larger instead of regrouping
  • D (3 ): regrouped but did not take 1 from the whole number

Multiply mixed numbers

Method. Never multiply the whole parts and the fraction parts separately; convert to improper fractions and cross-cancel first.

Worked example
What is 4 × 4 ?
A
B8
C16
D18
AnswerD — 18
Step-by-step
  1. Change each mixed number to an improper fraction: 4 = and 4 = .
  2. Multiply: = = 18 .
Quick checkEstimate: about 4 × 4 = 16 and at most 25; 18 is between them.
Common mistakes
  • A (): divided instead of multiplying
  • B (8 ): added instead of multiplying
  • C (16 ): multiplied the whole numbers and the fractions separately

Divide a mixed number by a fraction

Method. Keep – change – flip after converting the mixed number to an improper fraction.

Worked example
What is 3 ÷ ?
A
B2
C4
D4
AnswerD — 4
Step-by-step
  1. Change 3 to .
  2. Multiply by the reciprocal of : × = = 4 .
Quick checkMultiply back: 4 × = 3 .
Common mistakes
  • A (): flipped the first number instead of the second
  • B (2 ): multiplied without flipping the second fraction
  • C (4 ): divided only the whole number part

Fraction of a quantity — two steps

Method. Multiply by what is left each time: 120 × × = 36.

Worked example
Leo had $120. Leo spent of the money on lunch and then of the remaining money on a movie ticket. How many dollars did Leo have left?
A12
B36
C72
D84
AnswerB — 36
Step-by-step
  1. First purchase: of 120 = 120 ÷ 5 × 2 = 48, leaving 120 − 48 = 72.
  2. Second purchase: of the remaining 72 = 72 ÷ 2 × 1 = 36, leaving 72 − 36 = 36.
Quick checkSpent 48 + 36 = 84 and kept 36; 84 + 36 = 120.
Common mistakes
  • A (12): took the second fraction of the original amount instead of the remaining amount
  • C (72): forgot the second purchase
  • D (84): gave the total spent instead of the amount left

Find the whole from a fractional part (word problem)

Method. Divide by the fraction: 24 ÷ = 24 × = 80.

Worked example
of the books on a shelf are novels. There are 24 novels. How many books are on the shelf?
A7
B8
C56
D80
AnswerD — 80
Step-by-step
  1. of the whole is 24.
  2. So one part is 24 ÷ 3 = 8.
  3. The whole has 10 parts: 10 × 8 = 80.
Quick check of 80 = 80 ÷ 10 × 3 = 24.
Common mistakes
  • A (7 ): found of 24 instead of the whole
  • B (8): found the size of one tenth only
  • C (56): gave the number of books that are not novels instead of the whole

Complex fraction

Method. Multiply the top and the bottom of the complex fraction by 77 (the LCD) to clear the small fractions, then divide.

Worked example
What is the value of the complex fraction / ?
A
B
C
D1
AnswerD — 1
Step-by-step
  1. Work out the top first: 1 − = − = .
  2. Then divide by the bottom: ÷ = × = = 1 .
Quick checkMultiply back: 1 × = = 1 − .
Common mistakes
  • A (): divided before subtracting
  • B (): multiplied instead of dividing
  • C (): left out the 1 − part

Order of operations with fractions

Method. Do the × first, simplify it, then add with a common denominator.

Worked example
What is + × ?
A
B
C
D1
AnswerB —
Step-by-step
  1. Multiply before adding: × = .
  2. Then add: + = .
Quick check must be more than , because a positive amount is added to it.
Common mistakes
  • A (): added first, then multiplied (worked left to right)
  • C (): divided instead of multiplying
  • D (1 ): added all three

Fraction between two fractions

Method. Change all fractions to decimals (top ÷ bottom) and pick the one strictly between the two given decimals.

Worked example
Which fraction is between and ?
A
B
C
D
AnswerC —
Step-by-step
  1. Rename with the common denominator 693: = , = and = .
  2. Only has a top number strictly between 99 and 315.
Quick checkAs decimals: ≈ 0.143, ≈ 0.222, ≈ 0.455.
Common mistakes
  • A (): is greater than , so it is not between
  • B (): is equal to , so it is not between
  • D (): is less than , so it is not between

Solve an equation with fractions — x/a + x/b = c

Method. Factor x: x = 6, and + = , so x = 6 ÷ = 9.

Worked example
If + = 6, what is x?
A4
B9
C24
D48
AnswerB — 9
Step-by-step
  1. Multiply every term by the least common denominator 6: 1x + 3x = 36.
  2. So 4x = 36 and x = 36 ÷ 4 = 9.
Quick checkSubstitute: + = + = 6.
Common mistakes
  • A (4): multiplied c by + instead of dividing
  • C (24): added tops and bottoms: 2 = c
  • D (48): added the bottom numbers: treated it as = c

Solve a proportion with expressions

Method. Multiply both sides by 10, then move the x-terms to the side with the larger coefficient to avoid negatives.

Worked example
If = , what is x?
A−11
B3
C10
D30
AnswerC — 10
Step-by-step
  1. Cross-multiply: 2(x + 5) = 5(x − 4).
  2. Distribute: 2x + 10 = 5x − 20.
  3. Collect terms: 10 + 20 = 5x − 2x.
  4. So 30 = 3x and x = 10.
Quick checkSubstitute x = 10: = 3 and = 3.
Common mistakes
  • A (−11): cross-multiplied the wrong way
  • B (3): did not distribute when cross-multiplying
  • D (30): forgot to divide by the coefficient of x

Solve a linear equation with fraction coefficients

Method. Clear denominators first: multiply every term by 12, then solve the whole-number equation.

Worked example
If x − = , what is x?
A−
B
C2
D3
AnswerD — 3
Step-by-step
  1. Add to both sides: x = + = .
  2. Multiply both sides by the reciprocal 3: x = × 3 = 3 .
Quick checkSubstitute: − = − = .
Common mistakes
  • A (−): subtracted the constant instead of adding it
  • B (): multiplied by the coefficient instead of dividing
  • C (2 ): divided by the coefficient before adding the constant (only to one term)

Rational reasoning — capacity from a change

Method. Capacity = amount added ÷ change in fraction = 48 ÷ = 120.

Worked example
A tank is full. After 48 liters are added, it is full. How many liters does the full tank hold?
A19
B80
C120
D240
AnswerC — 120
Step-by-step
  1. The 48 liters filled − = of the tank.
  2. If of the capacity is 48, the capacity is 48 ÷ = 48 × = 120 liters.
Quick check of 120 = 24 and of 120 = 72; the difference is 48.
Common mistakes
  • A (19 ): multiplied by the change instead of dividing
  • B (80): divided by the new fraction only
  • D (240): divided by the starting fraction instead of the change

Rational reasoning — fraction of a fraction

Method. Work backwards: girls = 20 ÷ = 28; students = 28 ÷ = 196.

Worked example
In a school, of the students are girls, and of the girls are in the chess club. If 20 girls are in the chess club, how many students are in the school?
A28
B168
C196
D980
AnswerC — 196
Step-by-step
  1. Chess-club girls are of = of all students.
  2. So of the total is 20, and the total is 20 ÷ = 196.
Quick check of 196 = 28 girls, and of 28 = 20.
Common mistakes
  • A (28): found only the number of girls
  • B (168): found the number of boys instead of all students
  • D (980): multiplied by both bottom numbers only

Rational reasoning — combined work

Method. Product over sum: = = 2 hours.

Worked example
Pipe A can fill a pool alone in 10 hours, and Pipe B can do it alone in 3 hours. Working together, how many hours will they take?
A
B2
C6
D13
AnswerB — 2
Step-by-step
  1. Rates: Pipe A does of the job per hour and Pipe B does .
  2. Together: + = of the job per hour.
  3. Time = 1 ÷ = = 2 hours.
Quick checkTogether must be faster than the faster one alone (3 hours); 2 < 3.
Common mistakes
  • A (): gave the combined rate (part per hour) instead of the time
  • C (6 ): averaged the two times
  • D (13): added the two times

Decimals

Line up the decimal points to add or subtract. To multiply, multiply as whole numbers and count the decimal places. To divide by a decimal, move both decimal points to make the divisor a whole number.

Key formulas
Place value
Multiply
Divide
Decimal to fraction
Rounding

Estimate a product of decimals

Method. Round first, then multiply the easy whole numbers: 52 × 22 = 1144.

Worked example
Rounding each number to the nearest whole number, which is the best estimate of 51.7 × 22.13?
A74
B114.4
C1144
D11440
AnswerC — 1144
Step-by-step
  1. 51.7 rounds to 52 and 22.13 rounds to 22.
  2. Multiply the rounded numbers: 52 × 22 = 1144.
Quick checkThe exact product is 1144.121, close to 1144.
Common mistakes
  • A (74): added instead of multiplying
  • B (114.4): placed the decimal point in the estimate
  • D (11440): put one extra zero on the estimate

Estimation with money

Method. Round each price first, then multiply and add: 3 × 5 + 31 = 46.

Worked example
Mia buys 3 notebooks that cost $4.89 each and a backpack that costs $31.15. Rounding each price to the nearest dollar, about how much does Mia spend in all?
A$36
B$39
C$43
D$46
AnswerD — $46
Step-by-step
  1. $4.89 rounds to $5 and $31.15 rounds to $31.
  2. The 3 notebooks cost about 3 × $5 = $15.
  3. Total: $15 + $31 = $46.
Quick checkthe exact cost is 3 × $4.89 + $31.15 = $14.67 + $31.15 = $45.82, close to $46 ✓.
Common mistakes
  • A ($36): counted only one notebook: $5 + $31
  • B ($39): added the 3 instead of multiplying by it: $31 + $5 + $3
  • C ($43): rounded $4.89 down to $4: 3 × $4 + $31

Decimals in money — multi-step

Method. Work in cents: 8 × 565 = 4520 cents; 5000 − 4520 = 480 cents = $4.80.

Worked example
Juice boxes cost $5.65 each. Tom buys 8 juice boxes and pays with $50. How much change does Tom get?
A$4.80
B$44.35
C$45.20
D$45.48
AnswerA — $4.80
Step-by-step
  1. Total cost: 8 × $5.65 = $45.20.
  2. Change: $50.00 − $45.20 = $4.80.
Quick checkCheck by adding back: $45.20 + $4.80 = $50.00, the amount paid.
Common mistakes
  • B ($44.35): subtracted the price of only one item
  • C ($45.20): gave the total cost instead of the change
  • D ($45.48): put the decimal point one place too far left in the total cost

Reasonableness — place the decimal point

Method. Count decimal places: 1 + 2 = 3, so put the point 3 places from the right of 1479: 1.479.

Worked example
The digits of the product 8.7 × 0.17 are 1479 (before the decimal point is placed). Which is the correct product?
A0.001479
B0.01479
C0.1479
D1.479
AnswerD — 1.479
Step-by-step
  1. Estimate: 8.7 is about 9 and 0.17 is about 0.2.
  2. So the product is about 1.8.
  3. The only choice near that is 1.479.
Quick checkDivide back to check: 1.479 ÷ 0.17 = 8.7, the first factor.
Common mistakes
  • A (0.001479): placed the decimal point three places too far left
  • B (0.01479): placed the decimal point two places too far left
  • C (0.1479): placed the decimal point one place too far left

Scientific notation — write a decimal

Method. Big number → positive exponent; small number (less than 1) → negative exponent; the exponent counts the places the point moves.

Worked example
Which shows 0.000649 in scientific notation?
A6.49 ×
B64.9 ×
C6.49 ×
D6.49 ×
AnswerA — 6.49 ×
Step-by-step
  1. Scientific notation is a number from 1 up to (not including) 10 times a power of 10.
  2. Move the decimal point to get 6.49.
  3. It moved 4 places to the right.
  4. So the exponent is −4: 6.49 × .
Quick check6.49 × = 6.49 × 0.0001 = 0.000649.
Common mistakes
  • B (64.9 × ): left the first factor outside 1 to 10 (not scientific notation)
  • C (6.49 × ): counted one place too many
  • D (6.49 × ): used the wrong sign on the exponent

Scientific notation — standard form

Method. Positive exponent → bigger number; negative exponent → smaller number. Slide the point 4 places.

Worked example
Write 5.21 × in standard form.
A0.0000521
B0.000521
C0.00521
D52,100
AnswerB — 0.000521
Step-by-step
  1. The exponent −4 means move the decimal point in 5.21 4 places to the left, filling with zeros.
  2. 0.000521.
Quick check0.000521 has its first non-zero digit in the (ten-thousandths) place, matching 5.21 × .
Common mistakes
  • A (0.0000521): moved the decimal point one place too many
  • C (0.00521): moved the decimal point one place too few
  • D (52,100): moved the decimal point the wrong way

Bounds of a rounded measurement

Method. Half of the rounding unit (1) is 0.5; go that far down from 869.

Worked example
The mass of a shipping crate is 869 kg, rounded to the nearest whole number. What is the least possible actual value?
A868
B868.5
C869
D869.5
AnswerB — 868.5
Step-by-step
  1. A value rounded to the nearest whole number can be up to half a whole number (0.5) away.
  2. Bounds: 869 − 0.5 = 868.5 and 869 + 0.5 = 869.5.
  3. The least possible value is 868.5.
Quick check868.5 rounds up to 869, and anything just below 869.5 rounds down to 869.
Common mistakes
  • A (868): subtracted a whole unit instead of half a unit
  • C (869): gave the rounded value
  • D (869.5): gave the greatest value instead of the least

Percent error

Method. Percent error = |measured − actual| ÷ actual × 100%.

Worked example
The actual length of a rod is 3.6 cm. A student measures it as 3.78 cm. What is the percent error?
A0.05%
B0.18%
C5%
D50%
AnswerC — 5%
Step-by-step
  1. Absolute error = |3.78 − 3.6| = 0.18 cm.
  2. Percent error = absolute error ÷ actual value × 100% = 0.18 ÷ 3.6 × 100% = 5%.
Quick check5% of 3.6 = 0.18, the size of the error.
Common mistakes
  • A (0.05%): did not multiply by 100
  • B (0.18%): gave the absolute error, not the percent error
  • D (50%): multiplied by 1,000 instead of 100

Repeating decimal to fraction

Method. A block of 2 repeating digits goes over 99: , then simplify.

Worked example
The decimal 0.7676… repeats the block 76 forever. Which fraction is equal to it?
A
B
C
D
AnswerC —
Step-by-step
  1. Let x = 0.7676….
  2. Multiply by 100: 100x = 76.7676….
  3. Subtract: 99x = 76.
  4. So x = .
Quick checkDivide to check: 76 ÷ 99 = 0.7676…, the same repeating decimal.
Common mistakes
  • A (): used one 9 too many in the bottom number
  • B (): treated it as a terminating decimal
  • D (): used a 9 followed by a 0 instead of all 9s

Percents

Percent means per hundred. Change the percent to a decimal or fraction, then multiply. Percent change compares the change with the original amount. For two changes in a row, multiply by both factors; do not add the percents.

Key formulas
Percent of
Percent change
Increase / decrease by r%
Find the original
Successive changes
Simple interest

Fraction to percent

Method. Scale the fraction to a denominator of 100 if you can: = = 35%.

Worked example
Write as a percent.
A0.35%
B7.20%
C35%
D65%
AnswerC — 35%
Step-by-step
  1. Divide to get a decimal.
  2. Then multiply by 100: 7 ÷ 20 = 0.35, and 0.35 × 100 = 35%.
Quick check35% of 20 is 7, which equals the top number 7.
Common mistakes
  • A (0.35%): wrote the decimal as the percent (did not multiply by 100)
  • B (7.20%): put a decimal point between the top and bottom numbers
  • D (65%): used the other part (100% minus the answer)

Percent increase and decrease

Method. New ÷ original = 0.625, so the change is 0.625 − 1 = −0.375 → 37.5%.

Worked example
The price of a jacket changed from $296.00 to $185.00. What is the percent decrease?
A37.5%
B60%
C62.5%
D111%
AnswerA — 37.5%
Step-by-step
  1. Change = $185.00 − $296.00 = −$111.00 (a decrease of $111.00).
  2. Percent change = 111 ÷ 296 × 100 = 37.5%.
Quick check$296.00 − 37.5% of $296.00 = $185.00.
Common mistakes
  • B (60%): divided by the new value instead of the original
  • C (62.5%): gave the new value as a percent of the original
  • D (111%): gave the amount of change as the percent

Discounts and sale prices

Method. Pay 75% of the price: 0.75 × $88.00 = $66.00.

Worked example
A pair of headphones costs $88.00. It is on sale for 25% off. What is the sale price?
A$22.00
B$66.00
C$87.75
D$110.00
AnswerB — $66.00
Step-by-step
  1. Discount = 25% of $88.00 = $22.00.
  2. Sale price = $88.00 − $22.00 = $66.00.
Quick check$88.00 − $66.00 = $22.00, which is 25% of $88.00.
Common mistakes
  • A ($22.00): gave the discount instead of the sale price
  • C ($87.75): subtracted the percent as a decimal
  • D ($110.00): added the discount instead of subtracting

Tax and tips

Method. Multiply by 1.08 (108%) in one step: 1.08 × $15.25 = $16.47.

Worked example
A purchase costs $15.25. An 8% sales tax is added. What is the total cost?
A$1.22
B$14.03
C$15.33
D$16.47
AnswerD — $16.47
Step-by-step
  1. Sales tax = 8% of $15.25 = 0.08 × $15.25 = $1.22.
  2. Total = $15.25 + $1.22 = $16.47.
Quick check$16.47 − $15.25 = $1.22, which is 8% of $15.25.
Common mistakes
  • A ($1.22): gave the sales tax only, not the total
  • B ($14.03): subtracted the sales tax instead of adding it
  • C ($15.33): added the percent as a decimal

Simple interest

Method. One year's interest is $141.00; multiply by 4 years.

Worked example
$4,700 is invested at 3% simple interest per year for 4 years. What is the interest earned?
A$56.40
B$141.00
C$564.00
D$5,264.00
AnswerC — $564.00
Step-by-step
  1. Simple interest I = P × r × t.
  2. Simple interest I = $4,700 × 0.03 × 4.
  3. So Simple interest I = $564.00.
Quick check$564.00 ÷ 4 = $141.00 per year, which is 3% of $4,700.
Common mistakes
  • A ($56.40): moved the decimal point one place too far left in the rate
  • B ($141.00): found the interest for one year only
  • D ($5,264.00): gave the total amount instead of the interest

Percent of a percent

Method. Multiply the decimals: 0.1 × 0.4 × 500 = 20.

Worked example
What is 10% of 40% of 500?
A20
B50
C200
D250
AnswerA — 20
Step-by-step
  1. Work from the right: 40% of 500 = 200.
  2. Then 10% of 200 = 20.
Quick check10% of 40% is 4%, and 4% of 500 = 20.
Common mistakes
  • B (50): found only 10% of 500
  • C (200): found only 40% of 500
  • D (250): added the percents

Reverse percent — find the original

Method. Divide by the multiplier (1.15); do not take 15% of the new amount.

Worked example
After a 15% increase, a monthly bill is $386.40. What was the bill before the increase?
A$328.44
B$336.00
C$371.40
D$444.36
AnswerB — $336.00
Step-by-step
  1. The new amount is 115% of the original.
  2. So original = $386.40 ÷ 1.15 = $336.00.
Quick check$336.00 + 15% of $336.00 = $386.40.
Common mistakes
  • A ($328.44): subtracted 15% of the new price
  • C ($371.40): subtracted 15 dollars
  • D ($444.36): increased the new price again

Percentage points versus percent change

Method. Percentage points = simple difference of the rates; percent change = that difference ÷ the original rate × 100.

Worked example
A bank's interest rate rose from 10% to 15%. By what percent did the rate increase?
A5%
B25%
C50%
D150%
AnswerC — 50%
Step-by-step
  1. The rate changed by 5 percentage points.
  2. Percent change = 5 ÷ 10 × 100 = 50%.
Quick check50% of 10% is 5 percentage points.
Common mistakes
  • A (5%): gave the change in percentage points, not the percent change
  • B (25%): added the two rates
  • D (150%): gave the new rate as a percent of the old rate

Mixtures — percent concentration

Method. Weighted average: (amount₁ × percent₁ + amount₂ × percent₂) ÷ total amount.

Worked example
40 liters of a 20% salt solution are mixed with 80 liters of a 35% salt solution. What is the percent of salt in the mixture?
A27.5%
B30%
C36%
D55%
AnswerB — 30%
Step-by-step
  1. Salt: 0.2 × 40 + 0.35 × 80 = 8 + 28 = 36 liters, in 120 liters.
  2. Percent = 36 ÷ 120 × 100 = 30%.
Quick check30% lies between 20% and 35%, closer to the percent of the larger amount.
Common mistakes
  • A (27.5%): averaged the two percents without weighting
  • C (36%): found the amount of salt but did not divide by the total volume
  • D (55%): added the two percents

Successive percent changes

Method. Multiply the multipliers: 1.1 × 0.7 = 0.77, then × $170.00 = $130.90.

Worked example
A price of $170.00 is increased by 10%, and then the new price is decreased by 30%. What is the final price?
A$13.09
B$56.10
C$119.00
D$130.90
AnswerD — $130.90
Step-by-step
  1. Increase: $170.00 × 1.1 = $187.00.
  2. Decrease that by 30%: $187.00 × 0.7 = $130.90.
Quick checkthe second change is taken from $187.00, not from $170.00, so the result is not $136.00.
Common mistakes
  • A ($13.09): moved the decimal point one place too far left
  • B ($56.10): gave the amount of the second change instead of the final price
  • C ($119.00): applied only the decrease

04.03 Algebra

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers algebra: linear equations and inequalities, systems, functions and slope, polynomials, factoring and simple quadratics.

Linear Equations

Undo operations in reverse order, doing the same thing to both sides. Clear fractions first by multiplying by the common denominator, and check by substituting.

Key formulas
Inverse operations
Clearing fractions
Literal equations
No solution / all reals

Two-step equations

Method. Undo addition/subtraction first, then multiplication.

Worked example
Solve for x: 5x + 7 = −23
A−150
B−30
C−
D−6
AnswerD — −6
Step-by-step
  1. Subtract 7 on both sides: 5x = −30.
  2. Divide by 5: x = −6.
Quick check5(−6) + 7 = −30 + 7 = −23.
Common mistakes
  • A (−150): multiplied by the coefficient instead of dividing
  • B (−30): forgot to divide by the coefficient
  • C (−): divided first but did not divide the constant

Multi-step equations — distributing

Method. Divide both sides by 6 first: x − 1 = −10, so x = −9.

Worked example
Solve for x: 6(x − 1) = −60
A−54
B−11
C−
D−9
AnswerD — −9
Step-by-step
  1. Distribute: 6x − 6 = −60.
  2. Add 6: 6x = −54.
  3. Divide by 6: x = −9.
Quick check6(−9 − 1) = 6(−10) = −60.
Common mistakes
  • A (−54): forgot to divide by 6
  • B (−11): used the wrong sign when moving the constant
  • C (−): multiplied only x by 6

Variables on both sides

Method. Collect x-terms on one side and numbers on the other; then divide.

Worked example
Solve for x: −8x − 1 = −10x + 17
A−9
B−1
C9
D18
AnswerC — 9
Step-by-step
  1. Add 10x to both sides: 2x − 1 = 17.
  2. Add 1: 2x = 18.
  3. Divide by 2: x = 9.
Quick checkleft side −8(9) − 1 = −73; right side −10(9) + 17 = −73.
Common mistakes
  • A (−9): made a sign error moving the constants (2x = −18)
  • B (−1): added the x-terms instead of subtracting (−18x = 18)
  • D (18): forgot to divide by the coefficient 2 (2x = 18)

Equations with fractions

Method. Divide by 2, then multiply by 3: 8 ÷ 2 = 4, × 3 = 12.

Worked example
Solve for x: x = 8
A4
B
C
D12
AnswerD — 12
Step-by-step
  1. Multiply both sides by the reciprocal .
  2. x = 8 × .
  3. So x = 12.
Quick checksubstitute x = 12 into x = 8; both sides equal 8.
Common mistakes
  • A (4): divided by 2 but did not multiply by 3
  • B (): multiplied by instead of its reciprocal
  • C (): subtracted

Equations with decimals

Method. Multiply every term by 100 to clear the decimals, then solve.

Worked example
Solve for x: 0.14x + 5.4 = 1.48
A−28
B−3.92
C−2.8
D−0.5488
AnswerA — −28
Step-by-step
  1. Subtract 5.4: 0.14x = −3.92.
  2. Divide by 0.14: x = −28.
Quick check0.14 × (−28) + 5.4 = −3.92 + 5.4 = 1.48.
Common mistakes
  • B (−3.92): forgot to divide by the coefficient
  • C (−2.8): misplaced the decimal point when dividing (one place too far left)
  • D (−0.5488): multiplied by the coefficient instead of dividing

Equations from word problems — consecutive integers

Method. The average 34 is the middle of the list; count up from it in steps of 1.

Worked example
The sum of 3 consecutive integers is 102. What is the largest of these integers?
A33
B34
C35
D36
AnswerC — 35
Step-by-step
  1. Let the smallest be n: n + (n + 1) + (n + 2) = 102.
  2. So 3n + 3 = 102 and n = 33.
  3. The numbers are 33, 34, 35.
  4. The largest is 35.
Quick check33 + 34 + 35 = 102, and the numbers are consecutive integers.
Common mistakes
  • A (33): gave the smallest number
  • B (34): gave the middle (average) value
  • D (36): added one step too many

Equations from word problems — ages

Method. Take away the difference and share equally: (80 − 6) ÷ 2 = 37 for Leo; add 6 for Maya.

Worked example
Maya is 6 years older than Leo. The sum of their ages is 80. How old is Maya?
A37
B40
C43
D74
AnswerC — 43
Step-by-step
  1. Let Leo be L.
  2. Then Maya is L + 6, and L + (L + 6) = 80.
  3. So 2L = 74 and L = 37.
  4. Maya is 43.
Quick check37 + 43 = 80 and 43 − 37 = 6.
Common mistakes
  • A (37): gave Leo's age
  • B (40): ignored the difference in ages and split the sum equally
  • D (74): forgot to divide by 2

Multi-step equations — combining like terms

Method. Distribute, combine like terms on each side, then solve the two-step equation.

Worked example
Solve for x: 7(x + 9) + 7x − 3 = 172
A8
B
C16
D
AnswerA — 8
Step-by-step
  1. Distribute: 7x + 63 + 7x − 3 = 172.
  2. Combine like terms: 14x + 60 = 172.
  3. So 14x = 112 and x = 8.
Quick check7(8 + 9) + 56 − 3 = 119 + 56 − 3 = 172.
Common mistakes
  • B (): multiplied only x by 7
  • C (16): did not combine the x-terms
  • D (): used the wrong sign when moving the constants

Literal equations

Method. Undo the last operation done to w first (inverse operations).

Worked example
The formula A = lw is solved for w. Which equation is correct?
Aw = Al
Bw =
Cw =
Dw = A − l
AnswerB — w =
Step-by-step
  1. Isolate w by undoing each operation on it in reverse order.
  2. w = .
Quick checksubstitute for w in A = lw; the equation becomes an identity.
Common mistakes
  • A (w = Al): multiplied instead of dividing
  • C (w = ): divided the wrong way
  • D (w = A − l): subtracted instead of dividing

Solving for an expression

Method. No need to find x: 16x − 51 = 4(4x − 12) − 3 = 4(−48) − 3 = −195.

Worked example
If 4x − 12 = −48, what is the value of 16x − 51?
A−195
B−192
C−144
D−9
AnswerA — −195
Step-by-step
  1. x = = −9.
  2. Then 16x − 51 = 16(−9) − 51 = −195.
Quick checkwith x = −9, 4x − 12 = −48 ✓ and 16x − 51 = −195.
Common mistakes
  • B (−192): forgot the change to the constant (multiplied the equation by 4 only)
  • C (−144): left out the constant term
  • D (−9): gave x instead of the value of the expression

Equations from word problems — perimeter

Method. Half the perimeter is length + width = 54: 3w − 3 = 54, so w = 19.

Worked example
The length of a rectangle is 3 cm less than 2 times its width. The perimeter is 108 cm. What is the width, in cm?
A18
B19
C35
D54
AnswerB — 19
Step-by-step
  1. Let the width be w.
  2. Length = 2w − 3.
  3. Perimeter: 2w + 2(2w − 3) = 108.
  4. So 6w − 6 = 108 and w = 19.
  5. Length = 35.
Quick check2(35) + 2(19) = 108.
Common mistakes
  • A (18): ignored the 3 cm
  • C (35): gave the length
  • D (54): gave half the perimeter

Number of solutions

Method. Compare x-coefficients first, then constants.

Worked example
Which equation has no solution?
A4(x − 3) = 4x − 12
B4(x − 3) = 3x − 10
C4(x − 3) = 3x − 9
D4(x − 3) = 4x − 10
AnswerD — 4(x − 3) = 4x − 10
Step-by-step
  1. Distribute the left side to get 4x − 12.
  2. Equal x-coefficients with different constants give no solution.
  3. Identical sides give infinitely many.
  4. Different x-coefficients give exactly one.
  5. 4(x − 3) = 4x − 10 has no solution.
Quick checksubtracting 4x from both sides of 4(x − 3) = 4x − 10 leaves a false statement.
Common mistakes
  • A (4(x − 3) = 4x − 12): chose an equation that has infinitely many solutions
  • B (4(x − 3) = 3x − 10): chose an equation that has exactly one solution
  • C (4(x − 3) = 3x − 9): chose an equation that has exactly one solution

Parameters — no solution

Method. No solution ⇔ same x-coefficient on both sides and different constants.

Worked example
For what value of k does the equation kx − 7 = −9x + 7 have no solution?
A−9
B0
C9
D14
AnswerA — −9
Step-by-step
  1. Collect x-terms: (k − (−9))x = 14.
  2. Since 14 ≠ 0, there is no solution exactly when the x-coefficient is 0: k = −9.
Quick checkwith k = −9 the equation is −9x − 7 = −9x + 7, which simplifies to −7 = 7, false.
Common mistakes
  • B (0): thought k = 0 makes the equation have no solution
  • C (9): changed the sign of the coefficient
  • D (14): set k equal to the difference of the constants

Linear Inequalities

Solve like an equation, but reverse the sign when you multiply or divide by a negative number. A compound 'and' inequality is a single interval; an 'or' inequality is two pieces. A two-variable inequality is a half-plane: test a point to decide which side is shaded; a solid boundary means ≤ or ≥.

Key formulas
Flip rule
Compound (and)
Compound (or)
Absolute value (less than)
Absolute value (greater than)
Two variables
Test a point

Solving inequalities

Method. Solve it like an equation; the sign flips only when you multiply or divide by a negative number.

Worked example
Solve: 4x − 1 ≥ 11
Ax ≤ 3
Bx ≥ 3
Cx ≥
Dx > 3
AnswerB — x ≥ 3
Step-by-step
  1. Add 1 on both sides: 4x ≥ 12.
  2. Divide by 4 (positive, so the sign stays): x ≥ 3.
Quick checkx = 4 works (4(4) − 1 = 15, which is ≥ 11).
Common mistakes
  • A (x ≤ 3): reversed the inequality sign without a reason
  • C (x ≥ ): subtracted the constant instead of adding it
  • D (x > 3): changed whether the endpoint is included

Solving inequalities — negative coefficient

Method. Dividing (or multiplying) both sides by a negative number reverses the inequality.

Worked example
Solve: −4x + 13 ≥ 53
Ax ≥ −10
Bx ≤ 10
Cx ≥ 10
Dx ≤ −10
AnswerD — x ≤ −10
Step-by-step
  1. Subtract 13: −4x ≥ 40.
  2. Divide by −4 and reverse the sign (dividing by a negative): x ≤ −10.
Quick checkx = −11 should work: −4(−11) + 13 = 57, which is ≥ 53.
Common mistakes
  • A (x ≥ −10): forgot to reverse the sign when dividing by a negative number
  • B (x ≤ 10): dropped the negative sign of the coefficient but still reversed the sign
  • C (x ≥ 10): divided by the positive number instead of the negative one

Testing solutions of inequalities

Method. Substitute each choice, or solve once and compare.

Worked example
Which value of x is a solution of 9x − 14 < −77?
A−8
B−7
C−6
D−2
AnswerA — −8
Step-by-step
  1. Solve: 9x < −63.
  2. So x < −7.
  3. Only −8 satisfies x < −7.
Quick check9(−8) − 14 = −86, which is < −77.
Common mistakes
  • B (−7): chose the boundary value, which is not included
  • C (−6): chose a value on the wrong side of the boundary
  • D (−2): chose a value on the wrong side of the boundary

Inequalities with variables on both sides

Method. Collect x on one side; watch for dividing by a negative.

Worked example
Solve: 7x + 12 ≤ −4x + 67
Ax ≥ 5
Bx ≤
Cx ≤ 5
Dx ≤
AnswerC — x ≤ 5
Step-by-step
  1. Move the x-terms to the left: 11x ≤ 55.
  2. Divide by 11: x ≤ 5.
Quick checkat x = 5 both sides equal 47, so 5 is the boundary; test x = 4 to confirm the direction.
Common mistakes
  • A (x ≥ 5): reversed the sign without dividing by a negative
  • B (x ≤ ): added the x-terms instead of subtracting
  • D (x ≤ ): used the wrong sign when moving the constant

Compound inequalities — and

Method. Treat the middle as the target and apply each step to all three parts.

Worked example
Solve: −3 < −2x + 1 < 11
A− < x <
B−5 < x < 2
C−4 < x < 10
D−5 ≤ x ≤ 2
AnswerB — −5 < x < 2
Step-by-step
  1. Do the same thing to all three parts.
  2. Subtract 1: −4 < −2x < 10.
  3. Divide by −2 and reverse both signs: −5 < x < 2.
Quick checkthe endpoints come from −2x + 1 = −3 and −2x + 1 = 11: x = 2 and x = −5.
Common mistakes
  • A (− < x < ): divided all three parts but did not subtract the constant
  • C (−4 < x < 10): subtracted the constant but did not divide
  • D (−5 ≤ x ≤ 2): switched which endpoints are included

Greatest or least integer solution

Method. Solve, then step to the nearest integer on the allowed side (exclude the boundary for < or >).

Worked example
What is the least integer x that satisfies 8x − 18 ≥ 174?
A20
B23
C24
D25
AnswerC — 24
Step-by-step
  1. 8x ≥ 192.
  2. So x ≥ 24.
  3. The least integer that works is 24.
Quick check8(24) − 18 = 174 ≥ 174 ✓, but x = 23 gives 166, which fails.
Common mistakes
  • A (20): subtracted 18 from 174 instead of adding it (8x ≥ 156, so x ≥ 19.5, least integer 20)
  • B (23): took the integer just below the boundary, which does not satisfy the inequality
  • D (25): treated ≥ as >, so excluded x = 24

Inequality word problems

Method. Subtract the fixed fee, divide by the price, and round DOWN.

Worked example
A fair charges an entry fee of $17 and $9.50 per ride. Sam can spend at most $120. What is the greatest number of rides he can pay for?
A10
B11
C12
D14
AnswerA — 10
Step-by-step
  1. Let n be the number of rides: 17 + 9.5n ≤ 120.
  2. Then 9.5n ≤ 103.
  3. So n ≤ ≈ 10.84.
  4. The greatest whole number is 10.
Quick check10 rides cost $112.00 ≤ $120.00, but 11 cost $121.50.
Common mistakes
  • B (11): rounded up instead of down
  • C (12): ignored the one-time fee
  • D (14): added the fee to the budget

Two-variable inequalities — solutions

Method. Points that satisfy it lie below the line y = 3x + 1.

Worked example
Which point is a solution of y < 3x + 1?
A(1, 4)
B(0, 4)
C(−3, −1)
D(−1, −4)
AnswerD — (−1, −4)
Step-by-step
  1. Substitute the point.
  2. For (−1, −4), 3(−1) + 1 = −2, and y = −4 < −2 ✓.
Quick checkeach other choice gives a false statement when substituted.
Common mistakes
  • A ((1, 4)): chose a point on the boundary line, which is not included
  • B ((0, 4)): chose a point above the line
  • C ((−3, −1)): chose a point above the line

Compound inequalities — or

Method. “Or” keeps everything from both parts; “and” keeps only the overlap.

Worked example
Solve: 2x + 9 < 1 or 3x − 6 > 0
A−4 < x < 2
Bx > −4 or x < 2
Cx < −4 or x > 2
Dx ≤ −4 or x ≥ 2
AnswerC — x < −4 or x > 2
Step-by-step
  1. Solve each part.
  2. 2x + 9 < 1 gives x < −4.
  3. 3x − 6 > 0 gives x > 2.
  4. With “or”, the solution is either part: x < −4 or x > 2.
Quick checkx = −5 satisfies the first part and x = 3 satisfies the second; x = −3 satisfies neither.
Common mistakes
  • A (−4 < x < 2): took the values between the endpoints instead of outside them
  • B (x > −4 or x < 2): reversed both inequality signs
  • D (x ≤ −4 or x ≥ 2): included the endpoints

Two-variable inequalities — graphs

Method. Line: read the y-intercept and slope. Dashed → < or >; solid → ≤ or ≥. Above → y >; below → y <.

Worked example
Which inequality is shown by the graph? (The shaded region is the solution set.)
Figure for the worked example
Ay ≥ x − 3
By < x − 3
Cy > −x − 3
Dy > x − 3
AnswerD — y > x − 3
Step-by-step
  1. The boundary passes through (0, −3) with slope 1.
  2. So it is y = x − 3.
  3. It is dashed (not included) and the shading is above the line: y > x − 3.
Quick checkthe test point (0, −1) is in the shaded region and satisfies y > x − 3.
Common mistakes
  • A (y ≥ x − 3): misread the dashed/solid boundary line
  • B (y < x − 3): chose the wrong side of the line
  • C (y > −x − 3): used the wrong sign for the slope

Systems of linear inequalities

Method. A solution of a system must satisfy every inequality; test each choice in both.

Worked example
Which point is a solution of the system y ≥ 3x − 2 and y ≥ x − 3?
A(−1, −5)
B(2, 0)
C(−3, 1)
D(4, −5)
AnswerC — (−3, 1)
Step-by-step
  1. Test (−3, 1) in both.
  2. 1 ≥ −11 ✓ and 1 ≥ −6 ✓.
Quick checkeach other choice fails at least one of the two inequalities.
Common mistakes
  • A ((−1, −5)): checked only the first inequality
  • B ((2, 0)): checked only the second inequality
  • D ((4, −5)): chose a point that satisfies neither inequality

Function Notation

f(a) is the output when the input is a; solving f(x) = k asks for the inputs that give output k. Read values from graphs and tables, and find the domain and range from the graph or the formula.

Key formulas
Evaluate
Solve
Composition
Domain
Piecewise

Finding the rule

Method. Test each choice on ALL pairs, not just the first one.

Worked example
Which rule turns each input into its output? Input: 1, 3, 9. Output: 3, 7, 19.
AAdd 4
BAdd 1, then multiply by 2
CMultiply by 2, then add 1
DMultiply by 3
AnswerC — Multiply by 2, then add 1
Step-by-step
  1. Test the rule on every pair.
  2. 1 → 1 × 2 + 1 = 3.
  3. 3 → 3 × 2 + 1 = 7.
  4. 9 → 9 × 2 + 1 = 19.
  5. All three pairs match.
Quick checkthe input 9 gives 9 × 2 + 1 = 19, the last output ✓.
Common mistakes
  • A (Add 4): used the change in the outputs as the rule
  • B (Add 1, then multiply by 2): did the operations in the wrong order
  • D (Multiply by 3): combined the two numbers into one multiplier

Recognizing functions

Method. Scan the x-values only: a repeated x with different y's means NOT a function.

Worked example
Which set of ordered pairs represents a function?
A{(0, −4), (7, 5), (−3, −3), (6, −1)}
B{(6, 9), (5, −5), (1, 7), (5, 8)}
C{(0, −2), (−5, 0), (2, −1), (2, −3)}
D{(−2, 5), (1, 8), (−3, −1), (−3, −2)}
AnswerA — {(0, −4), (7, 5), (−3, −3), (6, −1)}
Step-by-step
  1. A relation is a function when no input (x-value) is paired with two different outputs.
  2. In {(0, −4), (7, 5), (−3, −3), (6, −1)} the x-values 0, 7, −3, 6 are all different.
  3. So it is a function.
  4. Each of the other sets uses one x-value twice with different y-values.
Quick checkthe x-values of the answer, −3, 0, 6, 7, have no repeats ✓.
Common mistakes
  • B ({(6, 9), (5, −5), (1, 7), (5, 8)}): chose a set in which the input 5 has two different outputs
  • C ({(0, −2), (−5, 0), (2, −1), (2, −3)}): chose a set in which the input 2 has two different outputs
  • D ({(−2, 5), (1, 8), (−3, −1), (−3, −2)}): chose a set in which the input −3 has two different outputs

Linear versus nonlinear

Method. Equal steps in x must give equal changes in y for a linear function.

Worked example
A function has the values x: 0, 1, 2, 3, 4 and y: 3, 6, 12, 24, 48. Which statement is true?
ALinear, because the x-values increase by 1
BLinear, because y changes by 3 each time x increases by 1
CLinear, because y always increases
DNonlinear, because the changes in y (3, 6, 12, 24) are not constant
AnswerD — Nonlinear, because the changes in y (3, 6, 12, 24) are not constant
Step-by-step
  1. Find the change in y for each step of 1 in x: 6 − 3 = 3, 12 − 6 = 6, 24 − 12 = 12, 48 − 24 = 24.
  2. The changes are not all equal.
  3. So the function is nonlinear.
Quick checkthe changes in y are 3, 6, 12, 24 — not all the same ✓.
Common mistakes
  • A (Linear, because the x-values increase by 1): looked only at the x-values
  • B (Linear, because y changes by 3 each time x increases by 1): used only the first change in y
  • C (Linear, because y always increases): thought an increasing function must be linear

Function notation — solving f(x) = k

Method. f(x) = k asks for the INPUT; undo the operations in reverse order.

Worked example
If f(x) = −2x + 8, for what value of x is f(x) = 14?
A−20
B−15
C−11
D−3
AnswerD — −3
Step-by-step
  1. Set f(x) = 14: −2x + 8 = 14.
  2. Subtract 8: −2x = 6.
  3. Divide by −2: x = −3.
Quick checkf(−3) = −2(−3) + 8 = 14 ✓.
Common mistakes
  • A (−20): found f(14) instead of solving f(x) = 14
  • B (−15): divided before subtracting the constant
  • C (−11): moved the constant with the wrong sign

Vertical line test

Method. Vertical line test: two points on one vertical line → not a function.

Worked example
Does the graph shown represent y as a function of x?
Figure for the worked example
ANo, because some vertical line crosses the graph more than once
BYes, because every vertical line crosses the graph at most once
CNo, because some horizontal line crosses the graph more than once
DYes, because the graph is one connected curve
AnswerA — No, because some vertical line crosses the graph more than once
Step-by-step
  1. Use the vertical line test: y is a function of x when no vertical line meets the graph twice.
  2. The graph is a circle.
  3. The vertical line x = −1 meets it at two points.
  4. So it is NOT a function.
Quick checkthe x-value −1 has two different y-values on the graph ✓.
Common mistakes
  • B (Yes, because every vertical line crosses the graph at most once): checked only a vertical line outside the graph
  • C (No, because some horizontal line crosses the graph more than once): gave a horizontal-line reason
  • D (Yes, because the graph is one connected curve): thought any connected curve is a function

Nonlinear patterns

Method. If the changes grow by a constant amount, compare the outputs with the square numbers.

Worked example
The table shows a pattern. Input: 1, 2, 3, 4. Output: 4, 10, 20, 34. If the pattern continues, what is the output when the input is 8?
A34
B90
C106
D130
AnswerD — 130
Step-by-step
  1. The changes in output are 6, 10, 14, which grow by 4.
  2. So the rule involves squaring.
  3. Compare with the squares: 4 = 2 · + 2, 10 = 2 · + 2, 20 = 2 · + 2, 34 = 2 · + 2.
  4. The rule is output = 2(input)² + 2.
  5. For 8: 2× + 2 = 130.
Quick checkthe rule gives 4, 10, 20, 34 for inputs 1, 2, 3, 4 ✓.
Common mistakes
  • A (34): doubled the input instead of squaring it
  • B (90): continued with the last change in y as if the function were linear
  • C (106): added the next change in y once for every step

Function notation — evaluating

Method. Put negative inputs in parentheses; square before multiplying by the coefficient.

Worked example
If f(x) = 4 + 6x − 5, what is f(−4)?
A−93
B35
C83
D227
AnswerB — 35
Step-by-step
  1. Substitute x = −4 with parentheses: f(−4) = 4 + 6(−4) − 5.
  2. Square first: = 16.
  3. Then 64 − 24 − 5 = 35.
Quick check = 16 (a square is never negative), so f(−4) = 64 − 24 − 5 ✓.
Common mistakes
  • A (−93): squared −4 as −16
  • C (83): evaluated f(4) instead of f(−4)
  • D (227): multiplied by 4 before squaring

Reading key features from graphs

Method. Inputs are read on the x-axis, outputs on the y-axis.

Worked example
The graph of y = f(x) is shown, with a closed dot at each end. What is the domain of f?
Figure for the worked example
A−6 ≤ x ≤ 6
B−6 < x < 6
C−5 ≤ x ≤ 3
Dall real numbers
AnswerA — −6 ≤ x ≤ 6
Step-by-step
  1. The domain is the set of x-values the graph covers.
  2. The graph starts at x = −6 and ends at x = 6, with both endpoints included.
  3. So the domain is −6 ≤ x ≤ 6.
Quick checkthe left end is (−6, −5) and the right end is (6, 2) ✓.
Common mistakes
  • B (−6 < x < 6): left out the endpoints
  • C (−5 ≤ x ≤ 3): gave the y-values (range) instead of the x-values
  • D (all real numbers): assumed the graph continues forever

Piecewise functions

Method. First pick the piece whose condition the input satisfies (watch < versus ≤ at the boundary).

Worked example
The function f is defined by f(x) = −3x for x < 3, and f(x) = 3 − 5 for x ≥ 3. What is f(2)?
A−6
B1
C6
D7
AnswerA — −6
Step-by-step
  1. Decide which piece applies: x = 2 satisfies x < 3.
  2. So use f(x) = −3x.
  3. Substitute: f(2) = −3(2) = −6.
Quick checkthe other piece would give 7, but 2 does not satisfy its condition ✓.
Common mistakes
  • B (1): added the two pieces
  • C (6): made a sign error
  • D (7): used the wrong piece

Equations of Lines

Find the slope, then use a point to write the equation. In y = mx + b, m is the slope and b is the y-intercept. Parallel lines have equal slopes; perpendicular slopes are negative reciprocals.

Key formulas
Slope
Slope-intercept
Point-slope
Standard form
Parallel / perpendicular
Intercepts

Slope from two points

Method. Rise over run: change in y on top, change in x below, both in the same order.

Worked example
What is the slope of the line through (7, 12) and (−8, 3)?
A−15
B−
C−
D
AnswerD —
Step-by-step
  1. Slope = .
  2. Slope = = −.
  3. So Slope = .
Quick checkfrom (7, 12), moving −15 in x and −9 in y lands on (−8, 3).
Common mistakes
  • A (−15): added the coordinates instead of subtracting
  • B (−): divided run by rise and made a sign error
  • C (−): subtracted the coordinates in opposite orders

Slope from a graph

Method. The line rises from left to right, so the slope is positive; count rise ÷ run between the dots.

Worked example
What is the slope of the line shown? (The marked points have whole-number coordinates.)
Figure for the worked example
A−2
B
C2
D4
AnswerC — 2
Step-by-step
  1. The marked points are (−4, −4) and (0, 4).
  2. Slope = = 2.
Quick checkgoing right 1 from (−4, −4) the line goes up 2.
Common mistakes
  • A (−2): read the direction of the line the wrong way
  • B (): divided run by rise
  • D (4): gave the y-intercept instead of the slope

Slope as a rate of change

Method. The rate is the slope: Δ(amount)/Δ(time).

Worked example
A water tank is being filled. After 6 minutes the total is 150 liters; after 7 minutes it is 170 liters. What is the rate, in liters per minute?
A
B20
C
D25
AnswerB — 20
Step-by-step
  1. Rate = change in amount ÷ change in time.
  2. Rate = = .
  3. So Rate = 20 liters per minute.
Quick checkstarting from 150 and adding 20 for each of the 1 extra minutes gives 150 + 20 × 1 = 170.
Common mistakes
  • A (): divided minutes by liters
  • C (): divided the second amount by its time (ignored the starting amount)
  • D (25): divided the first amount by its time (ignored the starting amount)

Slope-intercept form — reading m and b

Method. Slope = number multiplying x; y-intercept = number standing alone (with its sign).

Worked example
What are the slope and the y-intercept of the line y = −x − 7?
Aslope −, y-intercept −7
Bslope −7, y-intercept −
Cslope −, y-intercept 7
Dslope , y-intercept −7
AnswerA — slope −, y-intercept −7
Step-by-step
  1. In y = mx + b, m is the coefficient of x and b is the constant term.
  2. Here m = − and b = −7.
Quick checkat x = 0, y = −7, so the line crosses the y-axis at (0, −7).
Common mistakes
  • B (slope −7, y-intercept −): swapped the slope and the y-intercept
  • C (slope −, y-intercept 7): changed the sign of the y-intercept
  • D (slope , y-intercept −7): changed the sign of the slope

Equation of a line from its graph

Method. Read b where the line meets the y-axis; count rise/run for m.

Worked example
Which equation represents the line shown?
Figure for the worked example
Ay = −3x + 2
By = x + 2
Cy = 3x − 2
Dy = 3x + 2
AnswerD — y = 3x + 2
Step-by-step
  1. The line crosses the y-axis at (0, 2).
  2. So b = 2.
  3. Between the marked points (0, 2) and (−1, −1) the slope is 3.
  4. Equation: y = 3x + 2.
Quick check(−1, −1) satisfies y = 3x + 2: 3(−1) + 2 = −1.
Common mistakes
  • A (y = −3x + 2): used the wrong sign for the slope
  • B (y = x + 2): used run over rise for the slope
  • C (y = 3x − 2): used the wrong sign for the y-intercept

Points on a line

Method. Plug each x-value into the equation and compare the y-value.

Worked example
Which point lies on the line y = 3x − 5?
A(1, 2)
B(2, 11)
C(2, 1)
D(2, −11)
AnswerC — (2, 1)
Step-by-step
  1. Substitute x = 2: y = 3(2) − 5 = 1.
  2. So (2, 1) is on the line.
Quick check1 = 3 × 2 − 5 ✓, so the point satisfies the equation.
Common mistakes
  • A ((1, 2)): swapped the coordinates
  • B ((2, 11)): used the wrong sign for the y-intercept
  • D ((2, −11)): used the wrong sign for the slope

Linear models — interpreting coefficients

Method. Slope = rate per unit of the input; intercept = value when the input is 0.

Worked example
The cost C, in dollars, for m months is C = 75m + 20. What does the number 75 represent?
Athe cost for each additional month
Bthe fixed cost charged before any time is used
Cthe total cost for one month
Dthe number of months that can be bought
AnswerA — the cost for each additional month
Step-by-step
  1. In C = 75m + 20, 75 multiplies m (dollars per month, the slope) and 20 is the cost when m = 0 (the intercept).
  2. So 75 is the cost for each additional month.
Quick checkwhen m increases by 1, C increases by 75; when m = 0, C = 20.
Common mistakes
  • B (the fixed cost charged before any time is used): mixed up the slope and the intercept
  • C (the total cost for one month): added the two numbers in the equation
  • D (the number of months that can be bought): confused the input with a coefficient

Midpoint

Method. Midpoint = average of the x's and average of the y's; to find an endpoint, go the same step again past the midpoint.

Worked example
What is the midpoint of the segment from (3, 5) to (−5, 6)?
A
B(−2, 11)
C
D
AnswerD —
Step-by-step
  1. Midpoint = .
  2. Midpoint = .
  3. So Midpoint = .
Quick checkthe average of (3, 5) and (−5, 6) is .
Common mistakes
  • A (): subtracted the coordinates instead of adding
  • B ((−2, 11)): forgot to divide by 2
  • C (): swapped the x- and y-coordinates

Point-slope form

Method. b = y₁ − m·x₁ = −3 − (2)(4) = −11.

Worked example
A line has slope 2 and passes through (4, −3). Which is its equation in slope-intercept form?
Ay = 2x + 5
By = 2x − 11
Cy = 2x + 11
Dy = 2x − 3
AnswerB — y = 2x − 11
Step-by-step
  1. Point-slope: y − (−3) = 2(x − 4).
  2. Distribute and solve for y: y = 2x − 8 − 3 = 2x − 11.
Quick check2(4) − 11 = −3 ✓, so the line passes through the given point.
Common mistakes
  • A (y = 2x + 5): used the wrong sign when solving for b
  • C (y = 2x + 11): solved for b with both signs reversed
  • D (y = 2x − 3): used the y-coordinate of the point as the y-intercept

Equation through two points

Method. Find m from the two points, then b from either point.

Worked example
Which equation describes the line through (2, 5) and (−2, 3)?
Ay = 2x + 1
By = −x + 6
Cy = x + 4
Dy = x + 6
AnswerC — y = x + 4
Step-by-step
  1. Slope: = .
  2. Then b = 5 − (2) = 4.
  3. Equation: y = x + 4.
Quick checkboth points satisfy the equation, e.g. (−2) + 4 = 3.
Common mistakes
  • A (y = 2x + 1): used run over rise for the slope
  • B (y = −x + 6): used the wrong sign for the slope
  • D (y = x + 6): used the wrong sign when solving for b

Slope from standard form

Method. For Ax + By = C the slope is −.

Worked example
What is the slope of the line −3x + y = −2?
A−3
B−2
C
D3
AnswerD — 3
Step-by-step
  1. Solve for y: add 3x to both sides to get y = 3x − 2.
  2. The slope is the coefficient of x: 3.
Quick checkusing − directly, − = 3.
Common mistakes
  • A (−3): forgot the negative sign in −
  • B (−2): gave the y-intercept instead of the slope
  • C (): used the reciprocal of the slope

Parallel lines

Method. Keep the slope; find the new b from the point.

Worked example
Which line passes through (−6, −3) and is parallel to y = x − 5?
Ay = x + 3
By = −x − 9
Cy = x − 5
Dy = x − 9
AnswerA — y = x + 3
Step-by-step
  1. Parallel lines have equal slopes: m = 1.
  2. b = −3 − (1)(−6) = 3.
  3. Equation: y = x + 3.
Quick check1(−6) + 3 = −3 ✓, and the slope matches 1.
Common mistakes
  • B (y = −x − 9): used the perpendicular slope
  • C (y = x − 5): copied the original line
  • D (y = x − 9): used the wrong sign when solving for b

Parallel and perpendicular — classifying

Method. Put both in y = mx + b and compare m (and b).

Worked example
How are the lines y = x − 6 and −2x + 5y = 10 related?
Aparallel
Bperpendicular
Cneither parallel nor perpendicular
Dthe same line
AnswerC — neither parallel nor perpendicular
Step-by-step
  1. Rewrite the second line: y = x + 2, slope , y-intercept 2.
  2. The first has slope , y-intercept −6.
  3. The slopes are not equal and do not multiply to −1: neither.
Quick checkthe product of the slopes is × = 1, and the intercepts are −6 and 2.
Common mistakes
  • A (parallel): thought the slopes were equal
  • B (perpendicular): thought the slopes multiply to −1
  • D (the same line): assumed the intercepts were equal as well

Intercepts of a line

Method. Cover-up method: hide the y-term to get the x-intercept, hide the x-term to get the y-intercept.

Worked example
What are the intercepts of the line 6x − y = 42?
Ax-intercept (−42, 0), y-intercept (0, 7)
Bx-intercept (−7, 0), y-intercept (0, 42)
Cx-intercept (7, 0), y-intercept (0, −42)
Dx-intercept (6, 0), y-intercept (0, −1)
AnswerC — x-intercept (7, 0), y-intercept (0, −42)
Step-by-step
  1. x-intercept: set y = 0, 6x = 42, x = 7.
  2. y-intercept: set x = 0, −y = 42, y = −42.
Quick check6(7) + (−1)(0) = 42 and 6(0) + (−1)(−42) = 42.
Common mistakes
  • A (x-intercept (−42, 0), y-intercept (0, 7)): swapped the two intercepts
  • B (x-intercept (−7, 0), y-intercept (0, 42)): made a sign error on both intercepts
  • D (x-intercept (6, 0), y-intercept (0, −1)): used the coefficients as the intercepts

Distance between two points

Method. Draw the right triangle: legs |Δx| and |Δy|, distance is the hypotenuse.

Worked example
What is the distance between (5, 3) and (17, 19)?
A20
B28
C400
D4
AnswerA — 20
Step-by-step
  1. d = .
  2. d = = .
  3. So d = 20.
Quick check = 400 = 144 + 256.
Common mistakes
  • B (28): added the horizontal and vertical distances
  • C (400): forgot the square root
  • D (4): subtracted the squares

Perpendicular lines

Method. Flip the slope and change its sign; then find b from the point.

Worked example
Which line passes through (10, −1) and is perpendicular to y = x + 6?
Ay = −x + 14
By = −x +
Cy = x − 16
Dy = x −
AnswerA — y = −x + 14
Step-by-step
  1. Perpendicular slopes are opposite reciprocals: − = −.
  2. b = −1 − (10) = 14.
  3. Equation: y = −x + 14.
Quick check × = −1 ✓ and the point gives (10) + 14 = −1 ✓.
Common mistakes
  • B (y = −x + ): used only the opposite sign (not the reciprocal)
  • C (y = x − 16): used only the reciprocal (not the opposite sign)
  • D (y = x − ): used the same slope (parallel, not perpendicular)

Polynomial Expressions

Combine like terms, distribute, and use the special-product patterns. To factor, take out the GCF first, then look for a trinomial pattern or a difference of squares. Check a factoring by multiplying back.

Key formulas
Square of a sum
Square of a difference
Difference of squares
FOIL
Trinomial

Combining like terms

Method. Only terms with exactly the same variable part can be combined; keep each sign with its term.

Worked example
Simplify: −6 − 5 + 3x + 7 + 2
A− + 2
B−4 + 3x + 2
C−8 + 3x + 2
D−4 + 3x − 12
AnswerB — −4 + 3x + 2
Step-by-step
  1. Group the terms: −6 and 2 make −4.
  2. Group the x-terms: 3x is the only x-term.
  3. Group the constants: −5 and 7 make 2.
  4. Write the result: −4 + 3x + 2.
Quick checkat x = 1 the original expression and −4 + 3x + 2 both equal 1.
Common mistakes
  • A (− + 2): combined and x terms as if they were like terms
  • C (−8 + 3x + 2): used the wrong sign for one term
  • D (−4 + 3x − 12): used the wrong sign for a constant

Distributive property

Method. Multiply the outside number by EVERY term inside, keeping the sign of the outside number.

Worked example
Simplify: 1(−7x + 2) + 3(6x + 7)
A11x + 9
B11x + 23
C−25x − 19
D−x + 9
AnswerB — 11x + 23
Step-by-step
  1. Distribute: 1(−7x + 2) = −7x + 2 and 3(6x + 7) = 18x + 21.
  2. Combine: 11x + 23.
Quick checkat x = 1 the original gives 34 and 11x + 23 gives 34.
Common mistakes
  • A (11x + 9): multiplied only the first term in the second parentheses by 3
  • C (−25x − 19): subtracted the second product instead of adding
  • D (−x + 9): ignored the numbers outside the parentheses

Multiplying a monomial by a polynomial

Method. Multiply coefficients and ADD exponents for each term.

Worked example
Simplify: −2x(3x + 9)
A−6 + 9
B−6x − 18
C−6 − 18x
D + 7x
AnswerC — −6 − 18x
Step-by-step
  1. −2x · 3x = −6 and −2x · 9 = −18x.
  2. So the product is −6 − 18x.
Quick checkat x = 1, −2x(3x + 9) = −2(12) = −24, and −6 − 18x gives −24.
Common mistakes
  • A (−6 + 9): multiplied only the first term by −2x
  • B (−6x − 18): forgot to multiply the x-powers
  • D ( + 7x): added the coefficients instead of multiplying

Adding and subtracting polynomials

Method. Line up like terms (, x, constants); with subtraction, change every sign in the second polynomial.

Worked example
Simplify: −
A− + 5
B− + 4x − 3
C−13 + 5
D− + 1
AnswerB — − + 4x − 3
Step-by-step
  1. Distribute the minus sign to every term of the second polynomial.
  2. Then combine like terms: − + 4x − 3.
Quick checkat x = 1 the original gives −4 − (−4) = 0, and − + 4x − 3 gives 0.
Common mistakes
  • A (− + 5): changed the sign of only the first term of the second polynomial
  • C (−13 + 5): added instead of subtracting
  • D (− + 1): combined the x-terms with the constants

Multiplying binomials

Method. First, Outer, Inner, Last — then combine the two middle terms.

Worked example
Expand: (3x − 2)(2x − 7)
A6 + 14
B6 − 17x + 14
C6 − 25x − 14
D6 − 25x + 14
AnswerD — 6 − 25x + 14
Step-by-step
  1. FOIL: first 3x·2x = 6.
  2. Outer 3x·(−7) = −21x.
  3. Inner −2·2x = −4x.
  4. Last −2·(−7) = 14.
  5. Total: 6 − 25x + 14.
Quick checkCheck with x = 1: (1)(−5) = −5 and 6(1) − 25(1) + 14 = −5.
Common mistakes
  • A (6 + 14): multiplied only the first terms and the last terms
  • B (6 − 17x + 14): subtracted the outer and inner products
  • C (6 − 25x − 14): made a sign error on the last term

Special products

Method. Use the patterns = ± 2pq + and (p + q)(p − q) = − .

Worked example
Expand:
A + 4
B − 2x + 4
C − 4x + 4
D + 4x + 4
AnswerC — − 4x + 4
Step-by-step
  1. = + 2pq + with p = x, q = −2.
  2. + 2(x)(−2) + 4 = − 4x + 4.
Quick checkat x = 1 the original gives 1 and − 4x + 4 gives 1.
Common mistakes
  • A ( + 4): squared each term and forgot the middle term
  • B ( − 2x + 4): used ab instead of 2ab for the middle term
  • D ( + 4x + 4): used the wrong sign for the middle term

Factoring — greatest common factor

Method. Find the largest number and the lowest power of x that divide every term.

Worked example
Factor completely: 9 + 18 − 6
A3
B3
C3(3x + 6)
D3
AnswerA — 3
Step-by-step
  1. Every term contains 3: 9 + 18 − 6 = 3.
  2. The trinomial 3 + 6x − 2 has no common factor left.
Quick checkdistribute 3 back to get 9 + 18 − 6.
Common mistakes
  • B (3): factored out only the number, not the variable
  • C (3(3x + 6)): factored 3 out of the first two terms and dropped the −6 term
  • D (3): did not divide the last term by 3

Factoring trinomials (leading coefficient 1)

Method. Product = c, sum = b; the signs of c and b tell you the signs of the two numbers.

Worked example
Factor: − 18x + 81
A(x + 9)(x + 9)
B(x − 9)(x + 9)
C(x − 9)(x − 9)
D(x + 3)(x + 27)
AnswerC — (x − 9)(x − 9)
Step-by-step
  1. Find two numbers with product 81 and sum −18: −9 and −9.
  2. So − 18x + 81 = (x − 9)(x − 9).
Quick check(x − 9)(x − 9) = + (−9 + (−9))x + (−9)(−9) = − 18x + 81.
Common mistakes
  • A ((x + 9)(x + 9)): used the wrong signs in both factors
  • B ((x − 9)(x + 9)): used the wrong sign in one factor
  • D ((x + 3)(x + 27)): chose a factor pair of 81 that does not add to −18

Factoring — difference of squares

Method. − = (p + q)(p − q); take out any common factor first.

Worked example
Factor completely: 16 − 25
A(4x + 5)(4x − 5)
B(4x − 5)(4x − 5)
C(4x + 5)(4x + 5)
D(16x + 5)(x − 5)
AnswerA — (4x + 5)(4x − 5)
Step-by-step
  1. 16 − 25 = − .
  2. So it factors as (4x + 5)(4x − 5).
Quick check(4x + 5)(4x − 5) = 16 − 25.
Common mistakes
  • B ((4x − 5)(4x − 5)): wrote a perfect square instead of a difference of squares
  • C ((4x + 5)(4x + 5)): used + in both factors
  • D ((16x + 5)(x − 5)): did not take the square root of the coefficient

Factoring trinomials (leading coefficient ≠ 1)

Method. Check the outer and inner products of each candidate against the middle coefficient.

Worked example
Factor: 18 + 9x − 5
A(6x − 1)(3x + 5)
B(6x − 5)(3x + 1)
C(6x + 5)(3x − 1)
D(6x + 5)(3x + 1)
AnswerC — (6x + 5)(3x − 1)
Step-by-step
  1. Use the ac-method: a·c = 18 × (−5) = −90.
  2. Find two numbers with product −90 and sum 9: −6 and 15.
  3. Split the middle term and group: 18 − 6x + 15x − 5 = 6x(3x − 1) + 5(3x − 1) = (6x + 5)(3x − 1).
Quick checkouter 6·(−1) + inner 5·3 = −6 + 15 = 9 ✓.
Common mistakes
  • A ((6x − 1)(3x + 5)): placed the constants in the wrong factors
  • B ((6x − 5)(3x + 1)): used the wrong signs in both factors
  • D ((6x + 5)(3x + 1)): used the wrong sign in one factor

Factoring by grouping

Method. Pair the terms, factor each pair, then factor out the common binomial.

Worked example
Factor: 2 − 7 + 12x − 42
A(2x + 7)
B(2x − 7)
C(2x − 7)
D(2x − 7)(x + 6)
AnswerC — (2x − 7)
Step-by-step
  1. Group the first two terms and the last two terms: + (12x − 42).
  2. Factor out of the first group and 6 out of the second: (2x − 7) + 6(2x − 7).
  3. Factor out the common binomial (2x − 7): (2x − 7).
Quick check(2x − 7) expands to 2 − 7 + 12x − 42.
Common mistakes
  • A ((2x + 7)): made a sign error when factoring the first group
  • B ((2x − 7)): made a sign error when factoring the second group
  • D ((2x − 7)(x + 6)): wrote x instead of in the common factor

Quadratic Equations

Get 0 on one side, then factor and set each factor equal to 0. If there is no x-term, take square roots and remember both signs. Completing the square or the quadratic formula works when factoring does not.

Key formulas
Standard form
Zero-product property
Square-root method
Quadratic formula
Completing the square

Square-root equations x² = k

Method. = k (k > 0) always has two solutions, ±.

Worked example
Solve: = 25
Ax = 5
Bx = 25
Cx = ±10
Dx = ±5
AnswerD — x = ±5
Step-by-step
  1. Take the square root of both sides, remembering both signs.
  2. x = ±.
  3. So x = ±5.
Quick check = 25 and = 25.
Common mistakes
  • A (x = 5): forgot the negative square root
  • B (x = 25): did not take the square root
  • C (x = ±10): doubled the square root

Zero-product property

Method. Set each factor equal to 0; each root is the opposite of the number in its factor.

Worked example
Solve: (x − 8)(x − 3) = 0
Ax = −8 or x = −3
Bx = −3 or x = 8
Cx = 3 or x = 8
Dx = −8 or x = 3
AnswerC — x = 3 or x = 8
Step-by-step
  1. A product is 0 only when a factor is 0.
  2. x − 8 = 0 gives x = 8.
  3. x − 3 = 0 gives x = 3.
  4. So x = 3 or x = 8.
Quick checkat x = 8 the first factor is 0, so the product is 0.
Common mistakes
  • A (x = −8 or x = −3): used the numbers in the factors with their signs instead of the zeros
  • B (x = −3 or x = 8): changed the sign of only one root
  • D (x = −8 or x = 3): changed the sign of only the other root

Solving by factoring

Method. Get 0 on one side, factor, then set each factor to 0.

Worked example
Solve: − 13x + 30 = 0
Ax = −10 or x = −3
Bx = −3 or x = 10
Cx = 3 or x = 10
Dx = 1 or x = 30
AnswerC — x = 3 or x = 10
Step-by-step
  1. Factor: (x − 10)(x − 3) = 0, since 10 × 3 = 30 and 10 + 3 = 13.
  2. Zero-product property: x = 3 or x = 10.
Quick check + (−13)(10) + 30 = 0 ✓.
Common mistakes
  • A (x = −10 or x = −3): used the numbers from the factors without changing their signs
  • B (x = −3 or x = 10): made a sign error on one root
  • D (x = 1 or x = 30): chose a factor pair of 30 that does not add to −13

Square-root method

Method. Isolate the squared bracket, take the ± square root of both sides, then undo the shift inside the bracket.

Worked example
Solve: = 27
Ax = −6 ± 3
Bx = 6 + 3
Cx = −21 or x = 33
Dx = 6 ± 3
AnswerD — x = 6 ± 3
Step-by-step
  1. Take square roots: x − 6 = ± = ±3.
  2. Add 6 (move the constant): x = 6 ± 3.
Quick checksubstituting either root makes equal 27.
Common mistakes
  • A (x = −6 ± 3): used the wrong sign for h
  • B (x = 6 + 3): forgot the negative square root
  • C (x = −21 or x = 33): forgot to take the square root

Quadratic word problems — area

Method. Look for two numbers 10 apart whose product is 551: 19 and 29.

Worked example
A rectangle's length is 10 meters more than its width, and its area is 551 square meters. What is its length, in meters?
A19
B29
C39
D541
AnswerB — 29
Step-by-step
  1. Let w be the width: w(w + 10) = 551.
  2. So + 10w − 551 = 0.
  3. Factor: (w − 19)(w + 29) = 0.
  4. So w = 19 (a width cannot be negative).
  5. Length = 19 + 10 = 29.
Quick check19 × 29 = 551 and 29 − 19 = 10.
Common mistakes
  • A (19): gave the width
  • C (39): added the difference twice
  • D (541): subtracted the difference from the area

Solving by factoring (leading coefficient ≠ 1)

Method. Use the ac-method (or test rational roots ±(factors of c)/(factors of a)).

Worked example
Solve: 8 − 10x + 3 = 0
Ax = − or x = −
Bx = or x =
Cx = 1 or x = 3
Dx = or x =
AnswerB — x = or x =
Step-by-step
  1. Factor: (4x − 3)(2x − 1) = 0.
  2. Set each factor to 0: 4x − 3 = 0 gives x = .
  3. 2x − 1 = 0 gives x = .
Quick checkthe roots add to − = and multiply to = : and ✓.
Common mistakes
  • A (x = − or x = −): solved each factor with the wrong sign
  • C (x = 1 or x = 3): forgot to divide by the x-coefficient in each factor
  • D (x = or x = ): divided by the wrong coefficients

Completing the square

Method. Shortcut: + bx + c = 0 becomes = − c.

Worked example
Which equation is equivalent to + 6x − 22 = 0 after completing the square?
A = −13
B = 58
C = 31
D = 31
AnswerD — = 31
Step-by-step
  1. Move the constant: + 6x = 22.
  2. Half of 6 is 3, and = 9.
  3. Add it to both sides: + 6x + 9 = 31.
  4. Write the left side as a square: = 31.
Quick checkexpanding − 31 gives + 6x − 22.
Common mistakes
  • A ( = −13): added the constant instead of subtracting it
  • B ( = 58): used b instead of
  • C ( = 31): used the wrong sign inside the square

Quadratic word problems — projectile

Method. Set the height to 0, divide out the common factor, factor, and keep the positive root.

Worked example
A ball is thrown upward from a platform. Its height, in feet, after t seconds is h = −16 + 16t + 96. After how many seconds does it hit the ground?
A
B2
C3
D6
AnswerC — 3
Step-by-step
  1. Set h = 0: −16 + 16t + 96 = 0.
  2. Divide by −16: − t − 6 = 0, which factors as (t − 3)(t + 2) = 0.
  3. So t = 3 or t = −2.
  4. Time cannot be negative.
  5. So t = 3.
Quick checkh(3) = −16(9) + 16(3) + 96 = 0.
Common mistakes
  • A (): gave the time of maximum height
  • B (2): gave the negative root without its sign as a time
  • D (6): divided the starting height by 16

Systems of Linear Equations

Solve by substitution or elimination. Compare slopes to count solutions: different slopes give one solution, same slope with different intercepts gives none, and the same line gives infinitely many.

Key formulas
Elimination
Substitution
One solution
No solution (graphs)
Infinitely many (graphs)
No solution (coefficients)
Infinitely many (coefficients)

Systems — solving by graphing

Method. Look for the intersection point and read x first, then y.

Worked example
The graph shows the two lines of a system of linear equations. What is the solution of the system?
Figure for the worked example
A(1, 2)
B(0, −5)
C(0, 0)
D(2, 1)
AnswerD — (2, 1)
Step-by-step
  1. The solution is the point where the lines cross: (2, 1).
  2. Both lines pass through it: y = 3x − 5 and y = x.
Quick checkat x = 2, the first line gives 1 and the second gives 1; both equal y = 1.
Common mistakes
  • A ((1, 2)): read the coordinates in the wrong order
  • B ((0, −5)): gave where the first line crosses the y-axis
  • C ((0, 0)): gave where the second line crosses the y-axis

Systems — checking a solution

Method. Test each choice in BOTH equations; one failure rules it out.

Worked example
Which ordered pair is a solution of the system −3x + 2y = −25 and −2x + 3y = −30?
A(3, −8)
B(11, 4)
C(12, −2)
D(−8, 3)
AnswerA — (3, −8)
Step-by-step
  1. A solution must make both equations true.
  2. (3, −8): −3(3) + 2(−8) = −25 ✓ and −2(3) + 3(−8) = −30 ✓.
Quick checkevery other choice fails at least one of the two equations.
Common mistakes
  • B ((11, 4)): checked only the first equation
  • C ((12, −2)): checked only the second equation
  • D ((−8, 3)): swapped the coordinates of the solution

Systems — substitution

Method. When one equation already gives y, substitute it straight into the other.

Worked example
What is the solution (x, y) of the system y = 2x − 9 and −2x + 3y = 9?
A(9, 27)
B
C(9, 9)
D
AnswerC — (9, 9)
Step-by-step
  1. Substitute y = 2x − 9 into the second equation: −2x + 3(2x − 9) = 9.
  2. So 4x − 27 = 9.
  3. So x = 9.
  4. Then y = 2(9) − 9 = 9.
Quick check−2(9) + 3(9) = 9 ✓ and 2(9) − 9 = 9 ✓.
Common mistakes
  • A ((9, 27)): used the wrong sign for b when finding y
  • B (): used the wrong sign for the constant after substituting
  • D (): forgot to multiply b by 3 after substituting

Systems — elimination

Method. Scale the equations so one variable has opposite (or equal) coefficients, then add (or subtract).

Worked example
What is the solution (x, y) of the system −7x + 7y = 0 and 3x + 6y = 9?
A(−1, −1)
B(1, −1)
C(1, 1)
D(3, 3)
AnswerC — (1, 1)
Step-by-step
  1. Multiply the first equation by 6 and the second by 7.
  2. Then subtract to eliminate y: (−42 − 21)x = 0 − 63.
  3. So −63x = −63 and x = 1.
  4. Substitute into the first equation: −7(1) + 7y = 0.
  5. So y = 1.
Quick checkCheck both equations: −7(1) + 7(1) = 0 ✓ and 3(1) + 6(1) = 9 ✓.
Common mistakes
  • A ((−1, −1)): made a sign error when eliminating
  • B ((1, −1)): substituted x back with the wrong sign
  • D ((3, 3)): after using y = x, dropped the 6y term in the second equation (3x = 9, so x = y = 3)

Systems — number of solutions

Method. Compare slopes : different → one solution; same slope, different intercept → none; identical lines → infinitely many.

Worked example
How many solutions does the system 2x − 2y = 6 and −2x + 2y = −11 have?
Ainfinitely many solutions
Bexactly one solution
Cexactly two solutions
Dno solution
AnswerD — no solution
Step-by-step
  1. Compare the equations: the left sides are proportional (ratio −1) but the constants are not.
  2. So the lines are parallel — no solution.
Quick checkslope of the first line − = 1; slope of the second − = 1.
Common mistakes
  • A (infinitely many solutions): thought equal slopes always mean the same line
  • B (exactly one solution): thought different-looking equations must cross once
  • C (exactly two solutions): thought two lines can meet at two points

Systems — finding an expression directly

Method. Combine the equations so the coefficients of x and y become opposite; then divide.

Worked example
If 6x + y = −24 and 2x + 5y = −36, what is the value of x − y?
A−60
B−9
C−3
D3
AnswerD — 3
Step-by-step
  1. Subtract the second equation from the first: 4x − 4y = 12, which is 4(x − y) = 12.
  2. So x − y = 3.
  3. (Here x = −3 and y = −6.)
Quick checkx = −3, y = −6 satisfies both equations and gives x − y = 3.
Common mistakes
  • A (−60): added the equations but did not divide
  • B (−9): found x + y instead
  • C (−3): gave x only

Systems — parameter for no solution

Method. Same slope, different intercept ⇒ no solution: match the coefficient ratio.

Worked example
In the system −4x + 6y = 1 and kx + 24y = 8, k is a constant. For what value of k does the system have no solution?
A−32
B−16
C−4
D16
AnswerB — −16
Step-by-step
  1. No solution means parallel lines: the x- and y-coefficients must be in the same ratio while the constants are not.
  2. The y-coefficients give the ratio = 4.
  3. So k = 4 × (−4) = −16.
  4. The constants 8 and 4 × 1 = 4 differ.
  5. So the lines are parallel.
Quick checkwith k = −16, the second left side is 4 times the first (4 × (−4) = −16, 4 × 6 = 24), but 8 ≠ 4 × 1 = 4, so the lines are parallel.
Common mistakes
  • A (−32): scaled using the constants instead of the y-coefficients
  • C (−4): matched the coefficient without scaling
  • D (16): made a sign error in the matching coefficient

Systems — parameter for infinitely many solutions

Method. Infinitely many solutions ⇔ one equation is a constant multiple of the other.

Worked example
In the system 5x + 5y = −4 and 25x + 25y = c, c is a constant. For what value of c does the system have infinitely many solutions?
A−20
B−4
C1
D20
AnswerA — −20
Step-by-step
  1. The second equation must be a multiple of the first.
  2. Its x-coefficient is 25 = 5 × 5.
  3. So the factor is 5 and c = 5 × (−4) = −20.
Quick checkmultiplying 5x + 5y = −4 through by 5 gives 25x + 25y = −20, the same line.
Common mistakes
  • B (−4): did not scale the constant
  • C (1): added the scale factor instead of multiplying
  • D (20): made a sign error when scaling

Systems — word problems (two totals)

Method. If all 109 were child tickets they would bring $1,635.00; each adult ticket adds $5.00, so adults = ($1,935.00 − $1,635.00) ÷ $5.00 = 60.

Worked example
A theater sold 109 tickets for a total of $1,935.00. Adult tickets cost $20.00 and child tickets cost $15.00. How many adult tickets were sold?
A20
B49
C60
D109
AnswerC — 60
Step-by-step
  1. Let a = adult tickets and c = child tickets: a + c = 109 and 20a + 15c = 1935.
  2. Substitute c = 109 − a: 20a + 15(109 − a) = 1935.
  3. So 5a + 1635 = 1935, 5a = 300 and a = 60.
  4. (c = 49.)
Quick check60 + 49 = 109 and 60 × $20.00 + 49 × $15.00 = $1,200.00 + $735.00 = $1,935.00 ✓.
Common mistakes
  • A (20): divided the extra $300.00 by the cheaper price ($15.00) instead of the price difference ($5.00)
  • B (49): found the number of child tickets instead
  • D (109): gave the total number of tickets

04.04 Geometry and Measurement

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers geometry and measurement: angles and parallel lines, triangles and the Pythagorean theorem, similar figures, circles, area and volume, coordinate geometry and transformations.

Lines and Angles

Angle pairs: complementary angles add to 90°, supplementary angles add to 180°, and vertical angles are equal. When a line crosses two parallel lines, corresponding angles are equal, alternate interior angles are equal, and same-side interior angles add to 180°.

Key formulas
Complementary
Supplementary
Vertical angles
Around a point
Parallel lines
Same-side interior
Polygon angle sum
Regular polygon

Parallel lines and transversals

Method. Parallel lines: all acute angles are equal, all obtuse angles are equal, and an acute + an obtuse = 180°.

Worked example
In the figure, lines ℓ and m are parallel. What is the value of x?
Figure for the worked example
A1
B89
C91
D271
AnswerB — 89
Step-by-step
  1. The angle marked 89° and the angle marked x° are corresponding angles.
  2. With parallel lines, corresponding angles are equal.
  3. So x = 89.
Quick checkin the figure both marked angles are acute (just under 90°), as equal corresponding angles must be ✓.
Common mistakes
  • A (1): used complementary angles
  • C (91): assumed the angles are supplementary
  • D (271): subtracted from 360°

Angle relationships with algebra

Method. Write the angle relationship as an equation, then solve.

Worked example
Two angles measure (5x + 12)° and (4x + 17)°. The angles are vertical angles. What is the measure of the first angle, in degrees?
A5
B25
C37
D143
AnswerC — 37
Step-by-step
  1. Vertical angles are equal: 5x + 12 = 4x + 17.
  2. So x = 5.
  3. The first angle is 5(5) + 12 = 37°.
Quick checkthe angles are 37° and 37°, which are equal ✓.
Common mistakes
  • A (5): gave x instead of the angle
  • B (25): forgot the constant
  • D (143): gave the supplement

Angles in polygons

Method. Interior sum (n − 2)·180°; exterior sum always 360°.

Worked example
What is the measure, in degrees, of each interior angle of a regular polygon with 9 sides?
A40
B140
C180
D1260
AnswerB — 140
Step-by-step
  1. Sum = (9 − 2) × 180° = 1260°.
  2. Each of the 9 equal angles is 1260° ÷ 9 = 140°.
Quick checkinterior + exterior = 180° at each vertex, and 9 exterior angles of 40° make 360° ✓.
Common mistakes
  • A (40): gave the exterior angle (360° ÷ 9)
  • C (180): used n × 180° for the sum (1620° ÷ 9)
  • D (1260): gave the angle sum

Exterior angles of triangles

Method. Exterior angle = sum of the two remote interior angles.

Worked example
In the figure, two interior angles of the triangle measure 39° and 59°. What is the value of x, the exterior angle shown?
Figure for the worked example
A82
B98
C141
D262
AnswerB — 98
Step-by-step
  1. An exterior angle of a triangle equals the sum of the two remote interior angles.
  2. x = 39 + 59.
  3. So x = 98.
Quick checkthe interior angles 39°, 59° and 82° add to 180° ✓.
Common mistakes
  • A (82): gave the interior angle at that vertex: 180 − (39 + 59) = 82
  • C (141): subtracted only one remote angle from 180°: 180 − 39 = 141
  • D (262): subtracted the sum of the two given angles from 360°: 360 − 98 = 262

Parallel lines with algebra

Method. Decide equal or supplementary first, then solve the linear equation.

Worked example
In the figure, lines ℓ and m are parallel. What is the value of x?
Figure for the worked example
A
B
C35
D119
AnswerC — 35
Step-by-step
  1. The two angles are alternate interior angles.
  2. So they are equal: (4x − 21) = (5x − 56).
  3. Solving gives x = 35.
  4. So the angles are 119° and 119°.
Quick checkwith x = 35 the angles are 119° and 119°, which are equal ✓.
Common mistakes
  • A (): set the angles to add to 90°
  • B (): assumed the angles are supplementary
  • D (119): gave the angle instead of x

Triangles

Angles sum to 180°, the Pythagorean theorem links right-triangle sides, and similar triangles have equal angles and proportional sides.

Key formulas
Angle sum
Pythagorean theorem
Exterior angle
Special right triangles
Congruent triangles
Similar triangles
Triangle inequality

Triangle angle problems

Method. Add the three expressions, set the sum equal to 180 and solve.

Worked example
The angles of a triangle measure (2x + 17)°, (x − 3)° and (x − 6)°. What is the value of x?
A
B43
C47
D88
AnswerB — 43
Step-by-step
  1. The angles add to 180°.
  2. So 4x + 8 = 180.
  3. Then 4x = 172.
  4. So x = 43.
Quick checkthe angles are 103, 40, 37, which add to 180 ✓.
Common mistakes
  • A (): used 90° for the angle sum
  • C (47): moved the constants with the wrong sign
  • D (88): used 360° for the angle sum

Exterior angles of a triangle

Method. Exterior angle = sum of the two remote interior angles.

Worked example
An exterior angle of a triangle measures 89°. One of its remote interior angles measures 57°. What is the measure of the other remote interior angle, in degrees?
A32
B91
C123
D146
AnswerA — 32
Step-by-step
  1. An exterior angle equals the sum of the two remote interior angles.
  2. So 57° + x = 89°, and x = 89 − 57 = 32°.
Quick check57 + 32 = 89, the exterior angle ✓.
Common mistakes
  • B (91): gave the adjacent interior angle
  • C (123): subtracted the known angle from 180°
  • D (146): added instead of subtracting

Pythagorean theorem

Method. Recognize the triple 3–4–5 scaled by 2.

Worked example
In the right triangle shown, what is the value of x?
Figure for the worked example
A2
B10
C14
D100
AnswerB — 10
Step-by-step
  1. By the Pythagorean theorem, = + = 36 + 64 = 100.
  2. So x = = 10.
Quick check + = 100 = ✓.
Common mistakes
  • A (2): subtracted the squares
  • C (14): added the legs
  • D (100): forgot to take the square root

Similar triangles

Method. Find the scale factor from one known pair, then multiply.

Worked example
The two triangles shown are similar, with corresponding sides in matching positions. What is the value of x?
Figure for the worked example
A3
B4
C6
D12
AnswerA — 3
Step-by-step
  1. The triangles are similar.
  2. So corresponding sides are proportional.
  3. The scale factor from the first triangle to the second is 2 ÷ 4 = .
  4. So x = 6 × = 3.
Quick check3 ÷ 6 = , the same ratio as 2 ÷ 4 ✓.
Common mistakes
  • B (4): subtracted the difference of the known sides (4 − 2 = 2) from 6 instead of using the scale factor
  • C (6): gave the corresponding side of the first triangle
  • D (12): divided by the scale factor

Triangle inequality

Method. Third side: difference < x < sum.

Worked example
Two sides of a triangle have lengths 14 and 24. Which of the following could be the length of the third side?
A9
B10
C16
D38
AnswerC — 16
Step-by-step
  1. The third side must be strictly between 24 − 14 = 10 and 14 + 24 = 38.
  2. Only 16 lies strictly between 10 and 38.
Quick check10 < 16 < 38, so the three lengths form a triangle ✓.
Common mistakes
  • A (9): allowed a side shorter than the difference
  • B (10): allowed the third side to equal the difference
  • D (38): allowed the third side to equal the sum

Similar triangles in context

Method. Height ÷ shadow is constant at one time of day.

Worked example
At the same time of day, a 5-foot pole casts a 9-foot shadow and a tree casts a 27-foot shadow. How tall is the tree, in feet?
A15
B23
C
D135
AnswerA — 15
Step-by-step
  1. The sun's rays make similar right triangles.
  2. So height ÷ shadow is the same for both.
  3. = .
  4. So x = 5 × 27 ÷ 9 = 15.
Quick check and both equal , so the ratios match ✓.
Common mistakes
  • B (23): added the difference instead of using a ratio
  • C (): set up the proportion upside down
  • D (135): multiplied without dividing

Converse of the Pythagorean theorem

Method. + vs (c longest): equal → right, greater → acute, less → obtuse.

Worked example
A triangle has sides of length 20, 15, 13. Is the triangle right, acute or obtuse?
Aright
Bobtuse
Cacute
Dnot a triangle
AnswerB — obtuse
Step-by-step
  1. Compare the square of the longest side with the sum of the squares of the other two sides.
  2. + = 394 and = 400.
  3. The sum is smaller.
  4. So the triangle is obtuse.
Quick checka right triangle with legs 13 and 15 would have hypotenuse ≈ 19.8, which is less than 20, so the angle opposite 20 is greater than 90° ✓.
Common mistakes
  • A (right): thought + equals
  • C (acute): reversed the inequality test
  • D (not a triangle): thought the sides cannot form a triangle

Special right triangles

Method. 45°-45°-90°: 1 : 1 : . 30°-60°-90°: 1 : : 2.

Worked example
In a 30°-60°-90° triangle, the longer leg has length 3. What is the length of the shorter leg?
A6
B3
C3
D3
AnswerD — 3
Step-by-step
  1. In a 30°-60°-90° triangle the sides are in the ratio 1 : : 2 (shorter leg : longer leg : hypotenuse).
  2. The longer leg is 3.
  3. So the shorter leg is 3.
Quick check + = 36 = ✓.
Common mistakes
  • A (6): gave the hypotenuse instead
  • B (3): gave the longer leg instead
  • C (3): found the hypotenuse, 6, then divided it by as in a 45°-45°-90° triangle

Triangle congruence

Method. Valid: SSS, SAS, ASA, AAS, HL. Not valid: SSA, AAA.

Worked example
In triangles GHI and KLM, ∠I ≅ ∠M; HI ≅ LM; and ∠H ≅ ∠L. Which reason proves that △GHI ≅ △KLM?
AASA
BSAS
CHL
DThe triangles cannot be proved congruent
AnswerA — ASA
Step-by-step
  1. Two pairs of angles are congruent, and the side between them is congruent.
  2. So the triangles are congruent by ASA.
Quick checkthe named criterion uses exactly the given parts in the given order ✓.
Common mistakes
  • B (SAS): assumed two pairs of sides are congruent
  • C (HL): assumed the triangles are right triangles
  • D (The triangles cannot be proved congruent): thought these parts do not determine the triangle

Area and Perimeter

Area measures square units inside a figure; perimeter adds the side lengths. Split composite figures into simple shapes. If lengths are multiplied by k, the perimeter is multiplied by k and the area by k².

Key formulas
Rectangle
Triangle
Parallelogram
Trapezoid
Scale factor k

Area of triangles

Method. Use the perpendicular height, not the slanted side.

Worked example
In the triangle shown, the dashed segment is the height to the base, and its length is 6. What is the area of the triangle?
Figure for the worked example
A30
B50
C60
D100
AnswerA — 30
Step-by-step
  1. Area of a triangle = ½ × base × height.
  2. The height is the dashed segment, 6, which is perpendicular to the base 10.
  3. So A = ½ × 10 × 6 = 30.
Quick check2 × 30 = 60 = 10 × 6 ✓.
Common mistakes
  • B (50): used the slanted side as the height
  • C (60): forgot to multiply by ½
  • D (100): used the slanted side and forgot the ½

Perimeter of polygons

Method. Parallelogram: A = base × height; P uses the slanted sides.

Worked example
What is the perimeter of the parallelogram shown?
Figure for the worked example
A47
B59
C78
D94
AnswerD — 94
Step-by-step
  1. A parallelogram has two pairs of equal sides: 27 and 20.
  2. The height is not a side.
  3. So P = 2 × (27 + 20) = 94.
Quick check27 + 20 + 27 + 20 = 94 ✓.
Common mistakes
  • A (47): added only two sides
  • B (59): added the three labeled lengths
  • C (78): used the height instead of the slanted side

Area of parallelograms and trapezoids

Method. Average the two bases, then multiply by the height.

Worked example
What is the area of the trapezoid shown?
Figure for the worked example
A77
B91
C154
D
AnswerA — 77
Step-by-step
  1. Area of a trapezoid = ½ × (base₁ + base₂) × height.
  2. So A = ½ × (9 + 13) × 7 = ½ × 22 × 7 = 77.
Quick checkthe average base is 11, and 11 × 7 = 77 ✓.
Common mistakes
  • B (91): used only the longer base
  • C (154): forgot to multiply by ½
  • D (): multiplied the two bases

Area in the coordinate plane

Method. Use a horizontal or vertical side as the base, or box the figure and subtract.

Worked example
What is the area of the triangle with vertices (5, −7), (−2, 0), (−6, 0)?
A
B14
C22
D28
AnswerB — 14
Step-by-step
  1. Two vertices have y = 0.
  2. So that side is horizontal with length −2 − (−6) = 4.
  3. The height is the vertical distance from the third vertex: |−7 − 0| = 7.
  4. So A = ½ × 4 × 7 = 14.
Quick checkthe shoelace formula gives ½ × |28| = 14 ✓.
Common mistakes
  • A (): added the base and height instead of multiplying them, then took half
  • C (22): used a horizontal distance as the height
  • D (28): forgot to multiply by ½

Composite figures

Method. Split the figure into rectangles or subtract the missing corner.

Worked example
The figure shown is made of rectangles, and all corners are right angles. What is its perimeter, in units?
Figure for the worked example
A30
B38
C46
D75
AnswerB — 38
Step-by-step
  1. The two unlabeled sides are 10 − 5 = 5 and 9 − 6 = 3.
  2. So P = 10 + 9 + 5 + 6 + 5 + 3 = 38.
Quick checkthe perimeter equals that of the 10 × 9 rectangle, 2 × (10 + 9) = 38 ✓.
Common mistakes
  • A (30): added only the labeled sides
  • C (46): added the corner's sides twice
  • D (75): found the area

Area and perimeter with algebra

Method. Write the formula with the unknown, then solve.

Worked example
A triangle has base 6x and height x. Its area is 243. What is the value of x?
A9
B9
C54
D81
AnswerA — 9
Step-by-step
  1. Area = ½ × base × height = ½ × 6x × x = 3.
  2. So 3 = 243, = 81 and x = 9.
Quick check½ × 54 × 9 = 243 ✓.
Common mistakes
  • B (9): multiplied by ½ twice
  • C (54): gave the base
  • D (81): forgot to take the square root

Scaling and area

Method. Area scales by ; length ratio is the square root of the area ratio.

Worked example
Two similar figures have areas in the ratio 4 : 1. What is the ratio of their corresponding lengths?
A
B2
C4
D8
AnswerB — 2
Step-by-step
  1. The area ratio is the square of the length ratio.
  2. So the length ratio is = 2, that is 2 : 1.
Quick check = 4, the area ratio ✓.
Common mistakes
  • A (): took the square root twice
  • C (4): gave the area ratio
  • D (8): cubed the length ratio

Shaded regions

Method. Shaded area = outer area − inner area.

Worked example
A square is inscribed in a circle of radius 10. What is the area of the region inside the circle but outside the square?
A − 400
B − 200
C − 100
D200
AnswerB — − 200
Step-by-step
  1. The square's diagonal is the diameter, 20.
  2. A square with diagonal d has area ÷ 2 = 400 ÷ 2 = 200.
  3. Circle area = π × = .
  4. Shaded area = − 200.
Quick check100 × 3.14 − 200 = 114, which is positive ✓.
Common mistakes
  • A ( − 400): used a square whose side equals the diameter, area = 400
  • C ( − 100): used for the square's area
  • D (200): gave the area of the square

Circles

Circumference and area use π; an arc or a sector is the fraction θ/360° of the whole circle. An inscribed angle is half the central angle on the same arc, and a tangent is perpendicular to the radius at the point of contact.

Key formulas
Diameter
Circumference
Area
Arc length
Sector area
Inscribed angle
Tangent

Circumference

Method. C = πd = r: multiply the diameter by π.

Worked example
A circle has a diameter of 24 meters. What is its circumference, in meters?
A
B
C
D
AnswerA —
Step-by-step
  1. The circumference is C = πd.
  2. So C = π × 24 = meters.
Quick check ÷ π = 24, which is the diameter ✓.
Common mistakes
  • B (): used the diameter as the radius
  • C (): used the area formula πr²
  • D (): used π times the diameter squared

Area of a circle

Method. Square the radius first, then attach π.

Worked example
A circle has a radius of 9 feet. What is its area, in square feet?
A
B
C
D
AnswerC —
Step-by-step
  1. The area of a circle is A = πr².
  2. With r = 9: A = π × = square feet.
Quick check = 81, so A = ; is the circumference r, not the area ✓.
Common mistakes
  • A (): forgot to square the radius (π × 9)
  • B (): found the circumference r
  • D (): used the diameter 18 as the radius

Working backward with circles

Method. Find the radius first, then use the other formula.

Worked example
A circle has a circumference of units. What is its area, in square units?
A
B
C
D
AnswerC —
Step-by-step
  1. C = r = .
  2. So r = 5.
  3. The area is A = πr² = π × = square units.
Quick checka radius of 5 gives C = and A = ✓.
Common mistakes
  • A (): forgot to square the radius
  • B (): gave the circumference
  • D (): used the diameter as the radius

Semicircles and quarter circles

Method. Take the right fraction of the full circle, then add any straight edges.

Worked example
A semicircle has a diameter of 6 meters. Using 3.14 for π, what is the perimeter of the semicircle, in meters?
A9.42
B15.42
C18.84
D24.84
AnswerB — 15.42
Step-by-step
  1. The curved part is half the circumference: 3.14 × 6 ÷ 2 = 9.42.
  2. The straight side is the diameter, 6.
  3. So the perimeter is 9.42 + 6 = 15.42 meters.
Quick check15.42 − 6 = 9.42, half of 3.14 × 6 ✓.
Common mistakes
  • A (9.42): left out the diameter
  • C (18.84): gave the full circumference only
  • D (24.84): used the full circumference

Inscribed and central angles

Method. Inscribed angle = ½ arc; central angle = arc; opposite angles of a cyclic quadrilateral add to 180°.

Worked example
An inscribed angle in a circle intercepts an arc of 46°. What is the measure of the inscribed angle, in degrees?
A23
B46
C92
D157
AnswerA — 23
Step-by-step
  1. An inscribed angle is half its intercepted arc.
  2. So the angle is 46° ÷ 2 = 23°.
Quick check2 × 23 = 46, the arc ✓.
Common mistakes
  • B (46): used the arc measure
  • C (92): doubled instead of halving
  • D (157): found the supplement

Arc length

Method. Arc = × circumference.

Worked example
In a circle with radius 6, a central angle of 90° intercepts an arc. What is the length of the arc?
A
B
C
D
AnswerA —
Step-by-step
  1. Arc length = (central angle ÷ 360°) × r.
  2. So the arc length is × × 6 = × = .
Quick check ÷ = = ✓.
Common mistakes
  • B (): divided by 180 instead of 360
  • C (): found the sector area
  • D (): gave the whole circumference

Sector area

Method. Sector = × area of the circle.

Worked example
A sector of a circle with radius 12 has a central angle of 40°. What is the area of the sector?
A
B
C
D
AnswerC —
Step-by-step
  1. Sector area = (central angle ÷ 360°) × πr².
  2. So the area is × π × = × = .
Quick check ÷ = = ✓.
Common mistakes
  • A (): forgot to square the radius
  • B (): found the arc length
  • D (): gave the whole area

Tangent lines

Method. Radius ⊥ tangent, so use the Pythagorean theorem.

Worked example
In the figure, segment PT is tangent to circle O at T. What is the value of x?
Figure for the worked example
A24
B2
C36
D576
AnswerA — 24
Step-by-step
  1. A tangent is perpendicular to the radius at the point of tangency.
  2. So the triangle is a right triangle with hypotenuse 26.
  3. = − = 676 − 100 = 576.
  4. So x = 24.
Quick check + = 676 = ✓.
Common mistakes
  • B (2): added the squares
  • C (36): added the lengths
  • D (576): forgot to take the square root

Chords

Method. Half-chord² + distance² = radius².

Worked example
A chord is 18 units from the center of a circle with radius 30. What is the length of the chord?
A48
B60
C12
D576
AnswerA — 48
Step-by-step
  1. The perpendicular from the center bisects the chord, forming a right triangle with hypotenuse 30 and leg 18.
  2. Half the chord is = = 24.
  3. So the chord is 2 × 24 = 48.
Quick check + = 900 = ✓.
Common mistakes
  • B (60): gave the diameter
  • C (12): added the squares
  • D (576): forgot to take the square root

Volume and Surface Area

Volume measures cubic units; prisms and cylinders use base area × height, pyramids and cones take one third of that. If lengths are multiplied by k, surface area is multiplied by k² and volume by k³.

Key formulas
Prism / cylinder
Pyramid / cone
Sphere
Rectangular box
Cylinder surface
Scale factor k

Surface area of prisms

Method. SA = 2(lw + lh + wh): add the three different faces, then double.

Worked example
What is the surface area of the rectangular prism shown?
Figure for the worked example
A132
B178
C264
D356
AnswerB — 178
Step-by-step
  1. A rectangular prism has three pairs of equal faces.
  2. The faces have areas 4 × 3 = 12, 4 × 11 = 44 and 3 × 11 = 33.
  3. So SA = 2 × (12 + 44 + 33) = 2 × 89 = 178.
Quick checkthe six faces are 12, 12, 44, 44, 33 and 33, which add to 178 ✓.
Common mistakes
  • A (132): found the volume
  • C (264): used the largest face for all six faces
  • D (356): counted each face twice

Volume with fractional edges

Method. Change mixed numbers to improper fractions, then multiply.

Worked example
A box measures 3 feet by 6 feet by 5 feet. What is its volume, in cubic feet?
A97
B120
C131
D210
AnswerA — 97
Step-by-step
  1. V = l × w × h.
  2. Write 3 as .
  3. So V = × 6 × 5 = = 97 cubic feet.
Quick check3 × 30 = 97 because × 30 = ✓.
Common mistakes
  • B (120): rounded the length up
  • C (131 ): found the surface area
  • D (210): inverted the fraction part of the length

Volume of cylinders

Method. Cylinder: V = πr²h; SA = r² + rh.

Worked example
What is the volume of the cylinder shown? Give your answer in terms of π.
Figure for the worked example
A
B
C
D
AnswerA —
Step-by-step
  1. V = πr²h.
  2. V = π × × 6.
  3. So V = .
Quick check ÷ π = 384, matching the formula ✓.
Common mistakes
  • B (): multiplied by an extra 2
  • C (): used the diameter as the radius
  • D (): cubed the radius

Volume of triangular prisms

Method. Prism: V = base area × length; use the legs for a right triangle.

Worked example
A prism has a right-triangle base with legs 9 and 12 and hypotenuse 15. The prism is 15 units long. What is its volume, in cubic units?
A540
B810
C
D1620
AnswerB — 810
Step-by-step
  1. V = (area of base) × length.
  2. The base area is ½ × 9 × 12 = 54.
  3. So V = 54 × 15 = 810 cubic units.
Quick check810 ÷ 15 = 54 = ½ × 9 × 12 ✓.
Common mistakes
  • A (540): found the lateral area
  • C (): used the hypotenuse as a leg
  • D (1620): forgot the ½ in the triangle's area

Surface area of cylinders

Method. Cylinder: V = πr²h; SA = r² + rh.

Worked example
What is the total surface area of the cylinder shown? Use 3.14 for π.
Figure for the worked example
A244.92
B282.6
C433.32
D602.88
AnswerA — 244.92
Step-by-step
  1. SA = r² + rh = × + × 3 × 10 = + = .
  2. Using 3.14 for π, this is 3.14 × 78 = 244.92.
Quick check244.92 ÷ 3.14 = 78, matching the formula ✓.
Common mistakes
  • B (282.6): found the volume
  • C (433.32): counted the curved surface twice
  • D (602.88): used the diameter as the radius

Cones and pyramids

Method. Cone: V = ⅓πr²h; height is perpendicular, not the slant.

Worked example
What is the volume of the cone shown? Give your answer in terms of π.
Figure for the worked example
A
B
C
D
AnswerB —
Step-by-step
  1. The height, slant height and radius form a right triangle.
  2. So h = = = 4.
  3. V = ⅓πr²h = ⅓ × π × × 4 = ⅓ × = .
Quick check3 × = , the volume of the matching cylinder ✓.
Common mistakes
  • A (): forgot to square the radius
  • C (): used the slant height as the height
  • D (): forgot the ⅓

Solving for a dimension

Method. Substitute into the volume formula and solve for the unknown.

Worked example
A cylinder has a volume of cubic units and a radius of 4 units. What is its height, in units?
A
B3
C6
D24
AnswerC — 6
Step-by-step
  1. V = πr²h.
  2. So = π × × h = h.
  3. Divide both sides by : h = 6.
Quick checkπ × × 6 = ✓.
Common mistakes
  • A (): used the diameter as the radius
  • B (3): used r² for the base
  • D (24): forgot to square the radius

Spheres

Method. Sphere: V = πr³ and SA = r².

Worked example
A sphere has a radius of 8. What is its surface area? Give your answer in terms of π.
A
B
C
D
AnswerC —
Step-by-step
  1. SA = r².
  2. SA = 4 × π × .
  3. So SA = .
Quick check ÷ 4 = = π × ✓.
Common mistakes
  • A (): forgot to square the radius
  • B (): found the area of a great circle
  • D (): found the volume

Scaling and volume

Method. Volume scales by ; area by .

Worked example
Two similar solids have volumes in the ratio 64 : 1. What is the ratio of their corresponding edge lengths?
A
B4
C
D64
AnswerB — 4
Step-by-step
  1. The volume ratio is the cube of the length ratio.
  2. So the length ratio is = 4, that is 4 : 1.
Quick check = 64, the volume ratio ✓.
Common mistakes
  • A (): inverted the ratio
  • C (): divided the volume ratio by 3
  • D (64): gave the volume ratio

Composite solids

Method. Find each part's volume and add.

Worked example
A solid is a cylinder with radius 2 and height 8, with a cone of the same radius and height 12 on top. What is its volume? Give your answer in terms of π.
A
B
C
D
AnswerB —
Step-by-step
  1. Cylinder: πr²h = π × × 8 = .
  2. Cone: ⅓πr²h = ⅓ × π × × 12 = .
  3. Total = + = .
Quick check is more than the cylinder alone, ✓.
Common mistakes
  • A (): left out the cone
  • C (): forgot the ⅓ for the cone
  • D (): used the diameter as the radius of the cone

Coordinate Geometry and Transformations

Distance and midpoint formulas come from the Pythagorean theorem and averaging. A translation slides every point by the same amount; reflections and rotations move points by the fixed coordinate rules below.

Key formulas
Distance
Midpoint
Point a fraction t of the way from A to B
Translation
Reflect over x-axis / y-axis
Rotate 90° counterclockwise
Rotate 180°

Polygons on the coordinate plane

Method. Find side lengths by subtracting coordinates.

Worked example
A rectangle has vertices (−4, −2), (−2, −2), (−2, 9), (−4, 9). What is its area?
A13
B22
C26
D44
AnswerB — 22
Step-by-step
  1. The width is −2 − (−4) = 2 and the height is 9 − (−2) = 11.
  2. So the area is 2 × 11 = 22.
Quick check22 ÷ 2 = 11, the height ✓.
Common mistakes
  • A (13): added the side lengths
  • C (26): found the perimeter
  • D (44): doubled the area

Transformations on coordinates

Method. x-axis: negate y. y-axis: negate x. Origin: negate both. y = x: swap.

Worked example
What is the image of (9, −8) after a reflection across the x-axis?
A(9, 8)
B(−9, −8)
C(−9, 8)
D(−8, 9)
AnswerA — (9, 8)
Step-by-step
  1. A reflection across the x-axis follows the rule (x, y) → (x, −y).
  2. So (9, −8) → (9, 8).
Quick checkreflecting (9, 8) across the x-axis again gives back (9, −8) ✓.
Common mistakes
  • B ((−9, −8)): reflected across the y-axis instead
  • C ((−9, 8)): reflected across the origin instead
  • D ((−8, 9)): reflected across the line y = x instead

Slopes of parallel and perpendicular lines

Method. Parallel: same slope. Perpendicular: negative reciprocal.

Worked example
What is the slope of a line parallel to y = −x − 5?
A−
B−
C
D
AnswerA — −
Step-by-step
  1. Parallel lines have equal slopes.
  2. The slope of the given line is the coefficient of x, −.
  3. So the parallel slope is −.
Quick checka line with slope − never meets y = −x − 5 unless it is the same line ✓.
Common mistakes
  • B (−): took the reciprocal
  • C (): gave the perpendicular slope
  • D (): changed the sign

Distance formula

Method. Distance = ; look for a Pythagorean triple.

Worked example
What is the distance between (−1, 8) and (−22, 28)?
A29
B41
C5
D841
AnswerA — 29
Step-by-step
  1. d = .
  2. The differences are −22 − (−1) = −21 and 28 − 8 = 20.
  3. So d = = = 29.
Quick check = 841 = 441 + 400 ✓.
Common mistakes
  • B (41): added the horizontal and vertical distances
  • C (5): added the coordinates instead of subtracting
  • D (841): forgot to take the square root

Midpoint formula

Method. Midpoint: average the x's and average the y's.

Worked example
What is the midpoint of the segment with endpoints (−2, 1) and (−8, 1)?
A(−3, 0)
B(−10, 2)
C(1, −5)
D(−5, 1)
AnswerD — (−5, 1)
Step-by-step
  1. Average the x-coordinates: (−2 + (−8)) ÷ 2 = −5.
  2. Average the y-coordinates: (1 + 1) ÷ 2 = 1.
  3. So the midpoint is (−5, 1).
Quick check(−5, 1) is the same distance from both endpoints along each axis ✓.
Common mistakes
  • A ((−3, 0)): subtracted the coordinates before halving
  • B ((−10, 2)): added without dividing by 2
  • C ((1, −5)): reversed the x- and y-coordinates

04.05 Data Analysis and Probability

The Upper Level ISEE has a 47-question Mathematics Achievement section in 40 minutes, with four answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers data and probability: mean, median, mode, range and mean absolute deviation, reading and interpreting graphs, probability, expected value and counting.

Center and Spread

Mean, median and mode describe the center; the range and the mean absolute deviation (MAD) describe the spread. An outlier pulls the mean toward it but barely moves the median. Adding the same number to every value shifts the center but does not change the range or the MAD.

Key formulas
Mean
Sum from the mean
Median
Median (even count)
Mode
Range
Mean absolute deviation
Weighted mean
Add k to every value

Median

Method. Sort first; odd count → middle value, even count → mean of the two middle values.

Worked example
What is the median of the data set 42, 54, 28, 45, 23, 33, 51?
A4
B33
C42
D45
AnswerC — 42
Step-by-step
  1. Order the values.
  2. So 23, 28, 33, 42, 45, 51, 54.
  3. There are 7 values.
  4. The middle one is value 4, which is 42.
  5. So the median is 42.
Quick check3 values lie on each side of 42 in the ordered list ✓.
Common mistakes
  • A (4): gave the middle position instead of the value
  • B (33): took the value just below the middle
  • D (45): did not put the values in order first

Mean

Method. Mean = sum of the values ÷ how many values there are.

Worked example
What is the mean of 25, 28, 24, 83, 91?
A28
B32
C50.2
D251
AnswerC — 50.2
Step-by-step
  1. Add the values.
  2. So 25 + 28 + 24 + 83 + 91 = 251.
  3. Divide by the count, 5.
  4. So the mean is 251 ÷ 5 = 50.2.
Quick check50.2 × 5 = 251, the sum of the values ✓.
Common mistakes
  • A (28): gave the median
  • B (32): left out the greatest value but divided by the full count
  • D (251): found the sum but did not divide

Mean absolute deviation

Method. MAD = average distance from the mean.

Worked example
What is the mean absolute deviation (MAD) of 20, 7, 17, 4?
A6.5
B12
C16
D26
AnswerA — 6.5
Step-by-step
  1. First find the mean.
  2. So 48 ÷ 4 = 12.
  3. The distances from 12 are 8, 5, 5, 8.
  4. Their sum is 26.
  5. So MAD = 26 ÷ 4 = 6.5.
Quick checkthe distances above and below the mean both add to 13 ✓.
Common mistakes
  • B (12): gave the mean
  • C (16): gave the range
  • D (26): added the distances but did not divide

Effect of outliers

Method. Find both means, then subtract; an outlier pulls the mean toward it.

Worked example
The data set 22, 20, 10, 21, 15, 14, 108 has an outlier. By how much does the mean decrease when the outlier is removed?
A13
B17
C30
D91
AnswerA — 13
Step-by-step
  1. The mean with every value is 210 ÷ 7 = 30.
  2. The outlier is 108.
  3. Without it, the mean is 102 ÷ 6 = 17.
  4. The decrease is 30 − 17 = 13.
Quick check17 + 13 = 30, the original mean ✓.
Common mistakes
  • B (17): gave the new mean
  • C (30): gave the original mean
  • D (91): gave the outlier's distance from the new mean

Comparing data sets

Method. Find the median of each set separately, then subtract.

Worked example
Data set A is 73, 74, 74, 63, 55, 39. Data set B is 66, 67, 55, 42, 12, 4. How much greater is the median of A than the median of B?
A19.5
B22
C116.5
D132
AnswerA — 19.5
Step-by-step
  1. Ordered, A is 39, 55, 63, 73, 74, 74.
  2. So its median is 68.
  3. Ordered, B is 4, 12, 42, 55, 66, 67.
  4. So its median is 48.5.
  5. The difference is 68 − 48.5 = 19.5.
Quick check48.5 + 19.5 = 68, the median of A ✓.
Common mistakes
  • B (22): compared the means instead
  • C (116.5): added the medians
  • D (132): compared the sums

Weighted mean

Method. Combined mean = total of all scores ÷ total count, not the average of the two means.

Worked example
One class of 12 students has a mean score of 93. Another class of 13 students has a mean score of 73. What is the mean score of all 25 students?
A82.6
B83
C83.4
D2065
AnswerA — 82.6
Step-by-step
  1. Total for the first class is 12 × 93 = 1116.
  2. Total for the second class is 13 × 73 = 949.
  3. The combined mean is (1116 + 949) ÷ 25 = 82.6.
Quick check82.6 is closer to 73, the mean of the larger class ✓.
Common mistakes
  • B (83): averaged the two means
  • C (83.4): matched each mean with the other group's size
  • D (2065): gave the total, not the mean

Missing value from a mean

Method. Missing value = mean × count − sum of the known values.

Worked example
The mean of 4 numbers is 58. 3 of the numbers are 53, 69, 67. What is the missing number?
A43
B58
C63
D232
AnswerA — 43
Step-by-step
  1. The total of all 4 numbers is 58 × 4 = 232.
  2. The known numbers add to 189.
  3. So the missing number is 232 − 189 = 43.
Quick check(189 + 43) ÷ 4 = 58, the given mean ✓.
Common mistakes
  • B (58): gave the mean
  • C (63): averaged the known values
  • D (232): gave the total of all the values

Graphs and Tables

Read the title, axes, scale and units before reading values. Bar graphs compare categories, line graphs show change over time, circle graphs show parts of a whole, and histograms show how many values fall in each interval.

Key formulas
Percent of whole
Circle graph angle
Change

Line graphs

Method. Percent change = (new − old) ÷ old × 100; always divide by the earlier year.

Worked example
The line graph shows concert tickets sold each year. What was the percent decrease from 2019 to 2021?
Figure for the worked example
A20%
B80%
C200%
D400%
AnswerB — 80%
Step-by-step
  1. Read the graph.
  2. So 2019 = 250 and 2021 = 50.
  3. The change is 200.
  4. Percent decrease = change ÷ original × 100 = 200 ÷ 250 × 100 = 80%.
Quick check250 − 80% of 250 = 250 − 200 = 50 ✓.
Common mistakes
  • A (20%): gave the new value as a percent of the original
  • C (200%): gave the change, not the percent change
  • D (400%): divided by the new value instead of the original

Circle graphs

Method. Number = percent × total ÷ 100.

Worked example
The circle graph shows the results for how students travel to school for 160 students. How many more of the students chose Bike than Walk?
Figure for the worked example
A25
B40
C72
D104
AnswerB — 40
Step-by-step
  1. The percents differ by 45% − 20% = 25%.
  2. Then 25% of 160 is × 160 = 40.
Quick checkBike = 72 and Walk = 32, and 72 − 32 = 40 ✓.
Common mistakes
  • A (25): subtracted the percents but did not find them of the total
  • C (72): gave the number for Bike only
  • D (104): added instead of subtracting

Histograms

Method. Add the heights of the bars from 30 onward.

Worked example
The histogram shows the ages of some members. Each bar includes its left edge but not its right edge. How many members had ages of at least 30?
Figure for the worked example
A6
B7
C8
D14
AnswerD — 14
Step-by-step
  1. At least 30 starts with the bar 30–35.
  2. Add that bar and every bar to its right.
  3. So 6 + 1 + 7 = 14.
Quick checkthe bars below 30 add to 7, and 7 + 14 = 21 ✓.
Common mistakes
  • A (6): used only one bar
  • B (7): counted the bars below
  • C (8): started one bar too late

Stem-and-leaf plots

Method. Count the leaves after 64 in its row, then every leaf below that row.

Worked example
The stem-and-leaf plot shows daily high temperatures (°F). How many values are greater than 64?
Figure for the worked example
A3
B5
C8
D10
AnswerD — 10
Step-by-step
  1. In the row with stem 6, the leaves greater than 4 give 2 values.
  2. Every value in the rows below it is greater, adding 8 more.
  3. So there are 10 values.
Quick check3 values are less than 64, and 3 + 10 = 13 ✓.
Common mistakes
  • A (3): counted the values below
  • B (5): counted only the row with stem 6
  • C (8): counted only the rows below the one with stem 6

Building data displays

Method. Angle = (part ÷ total) × 360°.

Worked example
A table of cars washed lists Week 1: 22, Week 2: 2, Week 3: 4 and Week 4: 12. In a circle graph of these data, what is the central angle, in degrees, for Week 3?
A4
B10
C18
D36
AnswerD — 36
Step-by-step
  1. The total is 22 + 2 + 4 + 12 = 40.
  2. Week 3 is of the data.
  3. The angle is × 360° = 36°.
Quick check36° ÷ 360° = , which matches 4 out of 40 ✓.
Common mistakes
  • A (4): gave the count
  • B (10): found the percent instead of the angle
  • C (18): used 180° for the full circle

Two-way tables

Method. Given a row → divide by that row's total.

Worked example
The two-way table shows the results of a survey of students. What percent of the students in the Grade 7 row are in the Music column?
Figure for the worked example
A15%
B25%
C40%
D60%
AnswerD — 60%
Step-by-step
  1. The question is about the Grade 7 row only.
  2. So divide by its total, 20.
  3. Then 12 ÷ 20 = = 60%.
Quick check60% of 20 is 12, the Grade 7 and Music cell ✓.
Common mistakes
  • A (15%): divided by the grand total
  • B (25%): found the percent of all students in the Grade 7 row
  • C (40%): used the Art cell

Misleading graphs

Method. Read values on the scale; a cut axis makes the bars' heights misleading.

Worked example
The bar graph shows visitors to two parks. Its vertical axis starts at 600, not 0. How many times as tall as the bar for Park B does the bar for Park A look?
Figure for the worked example
A
B
C2
D200
AnswerC — 2
Step-by-step
  1. Each bar's drawn height starts at 600.
  2. Park A's bar is 1000 − 600 = 400 tall and Park B's is 800 − 600 = 200 tall.
  3. So it looks 400 ÷ 200 = 2 times as tall.
Quick check200 × 2 = 400, the drawn height of the Park A bar ✓.
Common mistakes
  • A (): subtracted the starting value from one bar only
  • B (): used the actual values instead of the bar heights
  • D (200): found the difference instead of a ratio

Probability

Probability is favorable outcomes over equally likely total outcomes. For a conditional probability, restrict to the given row or column of a table. The expected count is the probability times the number of trials; the expected value adds each value times its probability (count a loss as negative).

Key formulas
Basic
Complement
Addition
Independent
Conditional
Expected count
Expected value

Experimental and theoretical probability

Method. Experimental = observed count ÷ trials.

Worked example
A spinner was spun 40 times and landed on blue 15 times. What is the experimental probability that the spinner lands on blue?
A
B
C
D
AnswerB —
Step-by-step
  1. Divide the number of times it happened by the number of trials.
  2. That gives 15 ÷ 40 = , which simplifies to .
Quick check15 + 25 = 40 trials ✓.
Common mistakes
  • A (): added the count to the trials
  • C (): divided by the other outcome
  • D (): used the other outcome

Expected counts

Method. Expected count = probability × number of spins.

Worked example
A spinner has 8 red, 6 yellow and 1 blue equal sections. It is spun 435 times. About how many times should it land on red?
A
B145
C203
D232
AnswerD — 232
Step-by-step
  1. P(red) = .
  2. Multiply by the number of spins.
  3. So × 435 = 232.
Quick checkthe expected counts for all three colors add to 435 ✓.
Common mistakes
  • A (): gave the probability, not the count
  • B (145): treated the three colors as equally likely
  • C (203): found the expected number of non-red results

Compound events

Method. Independent “and” → multiply the probabilities.

Worked example
A number cube is rolled and a spinner with 4 equal parts, 3 of them blue, is spun. What is the probability of rolling a number greater than 4 and spinning blue?
A
B
C
D
AnswerB —
Step-by-step
  1. The two results are independent.
  2. So multiply.
  3. P(a number greater than 4) = and P(blue) = .
  4. So P(both) = × = .
Quick checkthere are 6 × 4 = 24 equally likely pairs and 6 are favorable, giving ✓.
Common mistakes
  • A (): counted only one combined outcome
  • C (): used only the first event
  • D (): used only the second event

Conditional probability and two-way tables

Method. “Or” → row total + column total − the shared cell, then divide by the grand total.

Worked example
The table shows a survey of people. A person is chosen at random from everyone surveyed. What is the probability that the person is in the Adults row or the Prefers cats column (or both)?
Figure for the worked example
A
B
C
D
AnswerD —
Step-by-step
  1. Add P(Adults) and P(Prefers cats).
  2. Then subtract P(both) once.
  3. So + − = .
Quick checkcounting directly, 22 + 23 + 4 = 49 people are adults or prefer cats, out of 64 ✓.
Common mistakes
  • A (): found the probability of neither
  • B (): multiplied the separate probabilities
  • C (): found the “and” probability

Addition rule

Method. Add the two probabilities, then subtract the overlap once.

Worked example
For two events, P(A) = 0.6, P(B) = 0.52 and P(A and B) = 0.16. What is P(A or B)?
A0.04
B0.312
C0.8
D0.96
AnswerD — 0.96
Step-by-step
  1. Add P(A) and P(B).
  2. Then subtract the overlap P(A and B) once.
  3. So 0.6 + 0.52 − 0.16 = 0.96.
Quick check0.96 is at least the larger of P(A) and P(B) and at most 1 ✓.
Common mistakes
  • A (0.04): found the probability of neither
  • B (0.312): multiplied the probabilities
  • C (0.8): subtracted the overlap twice

Counting

Multiply choices for each stage. Use permutations when order matters and combinations when it does not.

Key formulas
Counting principle
Factorial
Permutations
Combinations

Counting principle

Method. Multiply the number of choices for each independent step.

Worked example
A meal has one of 8 starters, one of 8 main dishes and one of 6 desserts. How many different meals are possible?
A22
B64
C70
D384
AnswerD — 384
Step-by-step
  1. Multiply the number of choices for each course.
  2. 8 × 8 × 6 = 384.
Quick check8 × 8 = 64 starter-and-main pairs, each with 6 desserts, and 64 × 6 = 384 ✓.
Common mistakes
  • A (22): added instead of multiplying
  • B (64): left out the desserts
  • C (70): added the desserts instead of multiplying

Sample spaces and tree diagrams

Method. Count ordered pairs out of 36.

Worked example
Two fair dice are rolled. What is the probability that the sum is 8?
A
B
C
D
AnswerC —
Step-by-step
  1. There are 6 × 6 = 36 equally likely ordered outcomes, and 5 of them have sum 8.
  2. So the probability is .
Quick check5 favorable + 31 others = 36 ✓.
Common mistakes
  • A (): counted (a, b) and (b, a) as one favorable outcome, giving 3, but kept 36 outcomes in all
  • B (): treated the 11 sums as equally likely
  • D (): divided by 12 instead of 36

Permutations

Method. n! ÷ (product of factorials of repeated letters).

Worked example
How many different arrangements of the letters in the word CIRCLE are possible?
A120
B360
C720
D46656
AnswerB — 360
Step-by-step
  1. There are 6 letters.
  2. Repeated letters: C appears 2 times.
  3. Arrangements = 6! ÷ (2!) = 720 ÷ 2 = 360.
Quick checkswapping identical letters gives the same word, which is why we divide by 2 ✓.
Common mistakes
  • A (120): arranged one letter too few
  • C (720): did not divide for repeated letters
  • D (46656): allowed letters to repeat freely

Combinations

Method. No roles, just a group → order does not matter → nCr = nPr ÷ r!.

Worked example
In how many ways can a reading list of 2 books be chosen from 10 books?
A10
B20
C45
D90
AnswerC — 45
Step-by-step
  1. Order does not matter.
  2. So use combinations.
  3. C(10, 2) = 10! ÷ (2! × 8!) = 90 ÷ 2 = 45.
Quick checkC(10, 2) = C(10, 8) = 45 ✓.
Common mistakes
  • A (10): chose one too few
  • B (20): multiplied n by r
  • D (90): counted different orders as different

Expected value

Method. E = Σ (payoff × probability); losses are negative.

Worked example
In a game, you win $45 with probability and otherwise lose $8. What is the expected value of one play?
A$9.00
B$2.60
C$7.40
D$37.00
AnswerB — $2.60
Step-by-step
  1. Multiply each payoff by its probability and add.
  2. Win: 45 × = 9.
  3. Lose: −8 × = −6.4.
  4. Total 9 − 6.4 = 2.6.
  5. So the expected value is $2.60 per play.
Quick checkover 50 plays you expect about 10 wins, a net of 130 dollars ✓.
Common mistakes
  • A ($9.00): ignored the loss
  • C ($7.40): used the winning probability for the loss too
  • D ($37.00): ignored the probabilities