PSAT/NMSQT · Math · Unit 01 AlgebraAlgebra: Unit Study Guide
01.01 Linear Equations in One Variable
Linear equations in one variable are a core Algebra skill on the PSAT/NMSQT (Algebra is about 35% of the Math section). The Math section has 44 questions in 70 minutes, given as two 35-minute modules of 22 questions each; about 75% are multiple-choice and about 25% are student-produced responses. Expect equations with fractions and parentheses, equations built from a context, and questions about when an equation has no solution or infinitely many solutions. The built-in Desmos graphing calculator is available on every question, but setting the equation up correctly is what matters.
Linear Equations
Undo operations in reverse order, doing the same thing to both sides. Clear fractions first by multiplying by the common denominator, and check by substituting.
Key formulas| Inverse operations | ax+b=c ⇒ x=ac−b (a=0) |
| Clearing fractions | px+qx=r ⇒ qx+px=pqr |
| Literal equations | isolate the target variable; treat others as constants |
| No solution | variables cancel and leave 0=k (k=0) |
| Infinitely many solutions | variables cancel and leave 0=0 |
| Solving for an expression | 3x+6=21 ⇒ x+2=321=7 |
Two-step equations
Method. Undo addition/subtraction first, then multiplication.
Worked exampleSolve for x: 8x − 13 = 27
AnswerB — 5
Step-by-step- Add 13 on both sides: 8x = 40.
- Divide by 8: x = 5.
Quick check8(5) − 13 = 40 − 13 = 27.
Common mistakes- A (47): subtracted the constant instead of adding it
- C (8131): divided first but did not divide the constant
- D (40): forgot to divide by the coefficient
Multi-step equations — distributing
Method. Divide both sides by 2 first: x + 1 = 7, so x = 6.
Worked exampleSolve for x: 2(x + 1) = 14
AnswerA — 6
Step-by-step- Distribute: 2x + 2 = 14.
- Subtract 2: 2x = 12.
- Divide by 2: x = 6.
Quick check2(6 + 1) = 2(7) = 14.
Common mistakes- B (213): multiplied only x by 2
- C (8): used the wrong sign when moving the constant
- D (12): forgot to divide by 2
Variables on both sides
Method. Collect x-terms on one side and numbers on the other; then divide.
Worked exampleSolve for x: −4x + 31 = 28x − 289
AnswerD — 10
Step-by-step- Subtract 28x from both sides: −32x + 31 = −289.
- Subtract 31: −32x = −320.
- Divide by −32: x = 10.
Quick checkleft side −4(10) + 31 = −9; right side 28(10) − 289 = −9.
Common mistakes- A (−340): added the x-terms instead of subtracting
- B (−10): made a sign error moving the constants
- C (16129): added the constants instead of subtracting
Equations with fractions
Method. 2x + 5x = x · (107), so x = 7 × 710 = 10.
Worked exampleSolve for x: 2x + 5x = 7
AnswerB — 10
Step-by-step- Multiply every term by 10 (the LCD): 5x + 2x = 70.
- So 7x = 70 and x = 10.
Quick checksubstitute x = 10 into 2x + 5x = 7; both sides equal 7.
Common mistakes- A (1049): multiplied by the sum of the fractions instead of dividing
- C (49): added the denominators
- D (70): multiplied the right side by both denominators but did not combine the x-terms
Equations with decimals
Method. Multiply every term by 10 to clear the decimals, then solve.
Worked exampleSolve for x: 2.1x + 3.8 = 29
AnswerB — 12
Step-by-step- Subtract 3.8: 2.1x = 25.2.
- Divide by 2.1: x = 12.
Quick check2.1 × 12 + 3.8 = 25.2 + 3.8 = 29.
Common mistakes- A (1.2): misplaced the decimal point when dividing (one place too far left)
- C (25.2): forgot to divide by the coefficient
- D (52.92): multiplied by the coefficient instead of dividing
Multi-step equations — combining like terms
Method. Distribute, combine like terms on each side, then solve the two-step equation.
Worked exampleSolve for x: 4(x − 5) + x + 4 = −121
AnswerD — −21
Step-by-step- Distribute: 4x − 20 + x + 4 = −121.
- Combine like terms: 5x − 16 = −121.
- So 5x = −105 and x = −21.
Quick check4(−21 − 5) − 21 + 4 = −104 − 21 + 4 = −121.
Common mistakes- A (−5137): used the wrong sign when moving the constants
- B (−4105): did not combine the x-terms
- C (−24): multiplied only x by 4
Literal equations
Method. Undo the last operation done to h first (inverse operations).
Worked exampleThe formula A = (21)bh is solved for h. Which equation is correct?
Ah = 2bA
Bh = 2Ab
Ch = 2bA
Dh = 2Ab
AnswerC — h = 2bA
Step-by-step- Isolate h by undoing each operation on it in reverse order.
- h = 2bA.
Quick checksubstitute 2bA for h in A = (21)bh; the equation becomes an identity.
Common mistakes- A (h = 2bA): divided by 2 instead of multiplying
- B (h = 2Ab): multiplied by b instead of dividing
- D (h = 2Ab): divided the wrong way
Number of solutions
Method. Compare x-coefficients first, then constants.
Worked exampleWhich equation has no solution?
A5(x − 3) = 5x − 15
B5(x − 3) = 5x − 17
C5(x − 3) = 6x − 17
D5(x − 3) = 7x − 16
AnswerB — 5(x − 3) = 5x − 17
Step-by-step- Distribute the left side to get 5x − 15.
- Equal x-coefficients with different constants give no solution.
- Identical sides give infinitely many.
- Different x-coefficients give exactly one.
- 5(x − 3) = 5x − 17 has no solution.
Quick checksubtracting 5x from both sides of 5(x − 3) = 5x − 17 leaves a false statement.
Common mistakes- A (5(x − 3) = 5x − 15): chose an equation that has infinitely many solutions
- C (5(x − 3) = 6x − 17): chose an equation that has exactly one solution
- D (5(x − 3) = 7x − 16): chose an equation that has exactly one solution
Solving for an expression
Method. No need to find x: 18x + 28 = 3(6x + 7) + 7 = 3(37) + 7 = 118.
Worked exampleIf 6x + 7 = 37, what is the value of 18x + 28?
AnswerD — 118
Step-by-step- x = 637−7 = 5.
- Then 18x + 28 = 18(5) + 28 = 118.
Quick checkwith x = 5, 6x + 7 = 37 ✓ and 18x + 28 = 118.
Common mistakes- A (5): gave x instead of the value of the expression
- B (90): left out the constant term
- C (111): forgot the change to the constant (multiplied the equation by 3 only)
Equations from word problems — consecutive integers
Method. The average 26 is the middle of the list; count down from it in steps of 1.
Worked exampleThe sum of 3 consecutive integers is 78. What is the smallest of these integers?
AnswerB — 25
Step-by-step- Let the smallest be n: n + (n + 1) + (n + 2) = 78.
- So 3n + 3 = 78 and n = 25.
- The numbers are 25, 26, 27.
- The smallest is 25.
Quick check25 + 26 + 27 = 78, and the numbers are consecutive integers.
Common mistakes- A (24): used steps of 2 instead of 1
- C (26): gave the middle (average) value
- D (27): gave the largest number
Equations from word problems — ages
Method. Take away the difference and share equally: (69 − 15) ÷ 2 = 27 for Leo; add 15 for Maya.
Worked exampleMaya is 15 years older than Leo. The sum of their ages is 69. How old is Maya?
AnswerB — 42
Step-by-step- Let Leo be L.
- Then Maya is L + 15, and L + (L + 15) = 69.
- So 2L = 54 and L = 27.
- Maya is 42.
Quick check27 + 42 = 69 and 42 − 27 = 15.
Common mistakes- A (27): gave Leo's age
- C (54): forgot to divide by 2
- D (84): added the difference to the sum and did not divide by 2
Equations from word problems — perimeter
Method. Half the perimeter is length + width = 110: 4w − 6 = 110, so w = 29.
Worked exampleThe length of a rectangle is 3 times its width minus 6 cm. The perimeter is 220 cm. What is the width, in cm?
AnswerA — 29
Step-by-step- Let the width be w.
- Length = 3w − 6.
- Perimeter: 2w + 2(3w − 6) = 220.
- So 8w − 12 = 220 and w = 29.
- Length = 81.
Quick check2(81) + 2(29) = 220.
Common mistakes- B (55): divided the perimeter by the number of widths in one length plus one width
- C (81): gave the length
- D (110): gave half the perimeter
Parameters — no solution
Method. No solution ⇔ same x-coefficient on both sides and different constants.
Worked exampleFor what value of k does the equation kx + 4 = −5x − 7 have no solution?
AnswerB — −5
Step-by-step- Collect x-terms: (k − (−5))x = −11.
- Since −11 ≠ 0, there is no solution exactly when the x-coefficient is 0: k = −5.
Quick checkwith k = −5 the equation is −5x + 4 = −5x − 7, which simplifies to 4 = −7, false.
Common mistakes- A (−11): set k equal to the difference of the constants
- C (0): thought k = 0 makes the equation have no solution
- D (5): changed the sign of the coefficient
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Consecutive integers
Method. The middle (average) is 100 ÷ 5; step out from the middle.
Worked exampleThe sum of 5 consecutive integers is 100. What is the smallest of these integers?
AnswerA — 18
Step-by-step- Let the smallest be n.
- The 5 consecutive integers are n, n + 1, n + 2, n + 3, n + 4.
- Their sum: 5n + 10 = 100.
- Subtract 10: 5n = 90.
- Divide: n = 18.
- The smallest is 18.
Quick check18 + 19 + 20 + 21 + 22 = 100, the given sum ✓.
Common mistakes- B (19): added 1 to the smallest number
- C (20): gave the average (middle value)
- D (22): gave the largest number
Writing equations from words
Method. Fixed amount = constant; per-unit amount = coefficient of x.
Worked exampleA gym charges a one-time joining fee of $25 plus $45 per month. The total cost for x months is $295. Which equation represents this situation?
A45 + 25x = 295
B25x + 45x = 295
C45x = 295 + 25
D25 + 45x = 295
AnswerD — 25 + 45x = 295
Step-by-step- The fee is paid once: 25.
- The rate is paid for each of the x months: 45x.
- Total cost = fee + rate × x.
- So 25 + 45x = 295.
Quick checksolving gives x = (295 − 25) ÷ 45 = 6 months, a sensible whole number ✓.
Common mistakes- A (45 + 25x = 295): swapped the fixed fee and the rate
- B (25x + 45x = 295): multiplied the fixed fee by x too
- C (45x = 295 + 25): added the fee to the total instead of adding it to the monthly charges
01.02 Linear Equations in Two Variables
Linear equations in two variables describe a line: y = mx + b or ax + by = c. PSAT/NMSQT questions ask you to write such an equation from a context, interpret the slope and intercepts, find points on the line, and compare parallel and perpendicular lines.
Equations of Lines
Find the slope, then use a point to write the equation. Parallel lines share slopes; perpendicular slopes are negative reciprocals.
Key formulas| Slope | m=x2−x1y2−y1 |
| Slope-intercept form | y=mx+b (b=y-intercept) |
| Standard form | Ax+By=C: m=−BA (B=0) |
| Point-slope form | y−y1=m(x−x1) |
| Intercepts | x-intercept: set y=0;y-intercept: set x=0 |
| Parallel and perpendicular | parallel: m1=m2;perpendicular: m1m2=−1 |
Slope from two points
Method. Rise over run: change in y on top, change in x below, both in the same order.
Worked exampleWhat is the slope of the line through (−13, −4) and (5, 13)?
AnswerC — 1817
Step-by-step- Slope = x2−x1y2−y1.
- Slope = 5−(−13)13−(−4) = 1817.
- So Slope = 1817.
Quick checkfrom (−13, −4), moving 18 in x and 17 in y lands on (5, 13).
Common mistakes- A (−89): added the coordinates instead of subtracting
- B (−1817): subtracted the coordinates in opposite orders
- D (1718): divided the change in x by the change in y
Slope from a graph
Method. The line falls from left to right, so the slope is negative; count rise ÷ run between the dots.
Worked exampleWhat is the slope of the line shown? (The marked points have whole-number coordinates.)

AnswerB — −1
Step-by-step- The marked points are (−2, 5) and (2, 1).
- Slope = 2−(−2)1−5 = −1.
Quick checkgoing right 1 from (−2, 5) the line goes down 1.
Common mistakes- A (−2): counted two units of rise for each unit
- C (1): read the direction of the line the wrong way
- D (3): gave the y-intercept instead of the slope
Slope as a rate of change
Method. The rate is the slope: Δ(amount)/Δ(time).
Worked exampleA water tank is being filled at a constant rate. After 2 minutes the tank holds 190 liters of water; after 9 minutes it holds 750 liters. At what rate, in liters per minute, is the tank being filled?
AnswerC — 80
Step-by-step- Rate = change in amount ÷ change in time.
- Rate = 9−2750−190 = 7560.
- So Rate = 80 liters per minute.
Quick checkstarting from 190 and adding 80 for each of the 7 extra minutes gives 190 + 80 × 7 = 750.
Common mistakes- A (801): divided minutes by liters
- B (9560): divided the change by the later time instead of the change in time
- D (95): divided the first amount by its time (ignored the starting amount)
Equation of a line from its graph
Method. Read b where the line meets the y-axis; count rise/run for m.
Worked exampleWhich equation represents the line shown?

Ay = −(34)x − 4
By = (34)x − 4
Cy = −(43)x − 4
Dy = −(34)x + 4
AnswerA — y = −(34)x − 4
Step-by-step- The line crosses the y-axis at (0, −4).
- So b = −4.
- Between the marked points (0, −4) and (−6, 4) the slope is −34.
- Equation: y = −(34)x − 4.
Quick check(−6, 4) satisfies y = −(34)x − 4: (−34)(−6) − 4 = 4.
Common mistakes- B (y = (34)x − 4): used the wrong sign for the slope
- C (y = −(43)x − 4): used run over rise for the slope
- D (y = −(34)x + 4): used the wrong sign for the y-intercept
Points on a line
Method. Plug each x-value into the equation and compare the y-value.
Worked exampleWhich point lies on the line y = −2x − 5?
A(2, −9)
B(−9, 2)
C(2, 1)
D(2, −1)
AnswerA — (2, −9)
Step-by-step- Substitute x = 2: y = (−2)(2) − 5 = −9.
- So (2, −9) is on the line.
Quick check−9 = (−2) × 2 − 5 ✓, so the point satisfies the equation.
Common mistakes- B ((−9, 2)): swapped the coordinates
- C ((2, 1)): used the wrong sign for the y-intercept
- D ((2, −1)): used the wrong sign for the slope
Point-slope form
Method. b = y₁ − m·x₁ = −6 − (32)(5) = −328.
Worked exampleA line has slope 32 and passes through (5, −6). Which is its equation in slope-intercept form?
Ay = (32)x − 38
By = (32)x + 328
Cy = (32)x − 6
Dy = (32)x − 328
AnswerD — y = (32)x − 328
Step-by-step- Point-slope: y − (−6) = (32)(x − 5).
- Distribute and solve for y: y = (32)x − 310 − 6 = (32)x − 328.
Quick check(32)(5) − 328 = −6 ✓, so the line passes through the given point.
Common mistakes- A (y = (32)x − 38): used the wrong sign when solving for b
- B (y = (32)x + 328): solved for b with both signs reversed
- C (y = (32)x − 6): used the y-coordinate of the point as the y-intercept
Equation through two points
Method. Find m from the two points, then b from either point.
Worked exampleWhich equation describes the line through (6, −18) and (−5, 4)?
Ay = −(21)x − 15
By = −2x − 6
Cy = 2x − 30
Dy = −2x − 30
AnswerB — y = −2x − 6
Step-by-step- Slope: −5−64−(−18) = −2.
- Then b = −18 − (−2)(6) = −6.
- Equation: y = −2x − 6.
Quick checkboth points satisfy the equation, e.g. (−2)(−5) − 6 = 4.
Common mistakes- A (y = −(21)x − 15): used run over rise for the slope
- C (y = 2x − 30): used the wrong sign for the slope
- D (y = −2x − 30): used the wrong sign when solving for b
Slope from standard form
Method. For Ax + By = C the slope is −BA.
Worked exampleWhat is the slope of the line 7x + 5y = −3?
AnswerA — −57
Step-by-step- Solve for y: 5y = −7x − 3.
- So y = −(57)x − 53.
- The slope is −57.
Quick checkusing −BA directly, −57 = −57.
Common mistakes- B (−75): divided B by A
- C (−53): gave the y-intercept instead of the slope
- D (57): forgot the negative sign in −BA
Parallel lines
Method. Keep the slope; find the new b from the point.
Worked exampleWhich line passes through (−2, 1) and is parallel to y = −(21)x + 8?
Ay = 2x + 5
By = −(21)x + 8
Cy = −(21)x + 2
Dy = −(21)x
AnswerD — y = −(21)x
Step-by-step- Parallel lines have equal slopes: m = −21.
- b = 1 − (−21)(−2) = 0.
- Equation: y = −(21)x.
Quick check(−21)(−2) = 1 ✓, and the slope matches −21.
Common mistakes- A (y = 2x + 5): used the perpendicular slope
- B (y = −(21)x + 8): copied the original line
- C (y = −(21)x + 2): used the wrong sign when solving for b
Parallel and perpendicular — classifying
Method. Put both in y = mx + b and compare m (and b).
Worked exampleHow are the lines y = −(21)x − 4 and 3x + 6y = −24 related?
Aparallel
Bperpendicular
Cthe same line
Dneither parallel nor perpendicular
AnswerC — the same line
Step-by-step- Rewrite the second line: y = −(21)x − 4, slope −21, y-intercept −4.
- The first has slope −21, y-intercept −4.
- Equal slopes and equal intercepts: the same line.
Quick checkthe product of the slopes is (−21) × (−21) = 41, and the intercepts are −4 and −4.
Common mistakes- A (parallel): compared only the slopes and ignored the intercepts
- B (perpendicular): thought the slopes multiply to −1
- D (neither parallel nor perpendicular): missed that the slopes are equal
Intercepts of a line
Method. Cover-up method: hide the y-term to get the x-intercept, hide the x-term to get the y-intercept.
Worked exampleWhat are the intercepts of the line 6x − y = 24?
Ax-intercept (4, 0), y-intercept (0, −24)
Bx-intercept (−24, 0), y-intercept (0, 4)
Cx-intercept (−4, 0), y-intercept (0, 24)
Dx-intercept (6, 0), y-intercept (0, −1)
AnswerA — x-intercept (4, 0), y-intercept (0, −24)
Step-by-step- x-intercept: set y = 0, 6x = 24, x = 4.
- y-intercept: set x = 0, −y = 24, y = −24.
Quick check6(4) + (−1)(0) = 24 and 6(0) + (−1)(−24) = 24.
Common mistakes- B (x-intercept (−24, 0), y-intercept (0, 4)): swapped the two intercepts
- C (x-intercept (−4, 0), y-intercept (0, 24)): made a sign error on both intercepts
- D (x-intercept (6, 0), y-intercept (0, −1)): used the coefficients as the intercepts
Linear models — interpreting coefficients
Method. Substitute m = 4: the monthly part is 50 × 4 = 200; add the fixed 35.
Worked exampleThe total cost C, in dollars, of renting a storage unit for m months is given by C = 50m + 35. What is the total cost, in dollars, of renting the storage unit for 4 months?
AnswerD — 235
Step-by-step- C = 50(4) + 35.
- C = 200 + 35.
- So C = 235 dollars.
Quick check235 − 35 = 200 and 200 ÷ 50 = 4 months ✓.
Common mistakes- A (89): added instead of multiplying
- B (190): swapped the rate and the fixed fee
- C (200): left out the fixed fee
Perpendicular lines
Method. Flip the slope and change its sign; then find b from the point.
Worked exampleWhich line passes through (4, −3) and is perpendicular to y = 2x − 1?
Ay = −2x + 5
By = (21)x − 5
Cy = 2x − 11
Dy = −(21)x − 1
AnswerD — y = −(21)x − 1
Step-by-step- Perpendicular slopes are opposite reciprocals: −21 = −21.
- b = −3 − (−21)(4) = −1.
- Equation: y = −(21)x − 1.
Quick check(2) × (−21) = −1 ✓ and the point gives (−21)(4) − 1 = −3 ✓.
Common mistakes- A (y = −2x + 5): used only the opposite sign (not the reciprocal)
- B (y = (21)x − 5): used only the reciprocal (not the opposite sign)
- C (y = 2x − 11): used the same slope (parallel, not perpendicular)
01.03 Linear Functions
A linear function changes by the same amount for every 1-unit change in its input. PSAT/NMSQT questions use function notation, tables and graphs, and ask what the slope and y-intercept mean in a real situation.
Linear Functions
A linear function has a constant rate of change. Use slope-intercept or point-slope form.
Key formulas| Function form | f(x)=mx+b,f(0)=b |
| Slope | m=x2−x1y2−y1 |
| Slope-intercept | y=mx+b |
| Point-slope | y−y1=m(x−x1) |
| Standard form | Ax+By=C, m=−BA (B=0) |
Rate of change from a table
Method. Divide the change in y by the change in x — check the x-step, it may not be 1.
Worked exampleThe table shows a linear function. x: −1, 1, 3, 5; y: −9, −7, −5, −3. What is the rate of change of y with respect to x?
AnswerB — 1
Step-by-step- Rate of change = (change in y) ÷ (change in x).
- From (−1, −9) to (1, −7): (−7 − (−9)) ÷ (1 − (−1)) = 2 ÷ 2 = 1.
Quick check(−3 − (−9)) ÷ (5 − (−1)) = 6 ÷ 6 = 1 too ✓.
Common mistakes- A (−1): made a sign error
- C (2): used the change in y without dividing by the change in x
- D (9): divided the first y-value by the first x-value
Initial value from a table
Method. Initial value = first y − rate × first x.
Worked exampleThe table shows a linear function. x: 2, 4, 6, 8; y: 1, −11, −23, −35. What is the value of y when x = 0?
AnswerD — 13
Step-by-step- Rate of change: (−11 − 1) ÷ 2 = −6.
- Going from x = 2 back to x = 0 is 2 units.
- So y changes by −6 × (−2) = 12.
- So y(0) = 1 + 12 = 13.
Quick checky = −6x + 13 gives −11 at x = 4, matching the table ✓.
Common mistakes- A (−11): added the rate instead of subtracting it
- B (1): gave the first y-value in the table
- C (7): went back only one unit of x
Slope and intercept from a graph
Method. Slope = rise/run between two exact grid points; y-intercept = where the line crosses the y-axis.
Worked exampleThe graph shows a line through two marked points. What is the y-intercept of the line?

AnswerD — 1
Step-by-step- The marked points are (0, 1) and (2, 2).
- So the slope is 21.
- The marked point (0, 1) is already on the y-axis.
- The line crosses the y−axis at (0, 1).
Quick checky = (21)x + 1 passes through (0, 1) and (2, 2) ✓.
Common mistakes- A (−2): gave the x-intercept
- B (−1): misread the sign
- C (21): gave the slope
Interpreting slope and intercept
Method. Coefficient of the input = rate per unit; constant = value at input 0.
Worked exampleThe equation A = 158 − 5w gives the amount A, in dollars, left on a gift card after w weeks. What does 158 represent in this equation?
Athe number of dollars spent from the card each week
Bthe amount left after w weeks
Cthe starting amount on the gift card
Dthe number of weeks the card is used
AnswerC — the starting amount on the gift card
Step-by-step- In a linear model output = (rate) × input + (starting value), the number multiplying w is the rate and the constant is the value when w = 0.
- 158 is the constant: when w = 0, A = 158.
- So it is the starting amount on the gift card.
Quick checkincreasing w by 1 changes A by −5, and at w = 0, A = 158 ✓.
Common mistakes- A (the number of dollars spent from the card each week): confused the starting amount with the rate
- B (the amount left after w weeks): described the output variable
- D (the number of weeks the card is used): described the input variable
Linear function from two points
Method. Slope from the two points, then b = y − mx with either point.
Worked exampleA linear function passes through (−3, −2) and (4, −16). Which equation defines it?
Ay = (−21)x − 27
By = −2x − 8
Cy = −2x + 4
Dy = 2x + 4
AnswerB — y = −2x − 8
Step-by-step- Slope: (−16 − (−2)) ÷ (4 − (−3)) = −14 ÷ 7 = −2.
- Intercept: substitute (−3, −2) into y = −2x + b: −2 = 6 + b.
- So b = −8.
- The equation is y = −2x − 8.
Quick checkat x = 4, −2(4) − 8 = −16 ✓.
Common mistakes- A (y = (−21)x − 27): divided the change in x by the change in y
- C (y = −2x + 4): made a sign error finding the intercept
- D (y = 2x + 4): made a sign error in the slope
Comparing linear models
Method. Equal cost: difference in fees ÷ difference in rates.
Worked examplePlan A costs $10 to join plus $13 per month. Plan B costs $41 to join plus $12 per month. After how many months do the two plans cost the same total amount?
AnswerC — 31
Step-by-step- Set the costs equal: 10 + 13m = 41 + 12m.
- Subtract 12m and 10 from both sides: m = 31.
- So the plans cost the same after 31 months.
Quick checkPlan A costs 10 + 13 × 31 = 413; Plan B costs 41 + 12 × 31 = 413 ✓.
Common mistakes- A (2531): added the rates instead of subtracting them
- B (2551): added the fees and the rates
- D (413): gave the equal cost instead of the number of months
Arithmetic sequences as linear functions
Method. Arithmetic sequence = linear function of n with slope = common difference.
Worked exampleThe sequence −9, −6, −3, 0, … is arithmetic. What is term 14?
AnswerB — 30
Step-by-step- The common difference is −6 − (−9) = 3.
- Term n = first term + (n − 1) × difference = −9 + 13 × 3 = 30.
Quick checkthe linear rule f(n) = 3n − 12 gives f(1) = −9 and f(14) = 30 ✓.
Common mistakes- A (−126): multiplied the first term by n
- C (33): used n instead of n − 1
- D (42): forgot the first term
Solving with linear models
Method. Undo the model: subtract the start value, divide by the rate.
Worked exampleThe equation H = 7d + 55 gives the height H, in centimeters, of a plant d days after it was measured. For what value of d is H = 97?
AnswerA — 6
Step-by-step- Substitute H = 97: 97 = 7d + 55.
- Subtract 55: 42 = 7d.
- Divide by 7: d = 6.
Quick check7(6) + 55 = 42 + 55 = 97 ✓.
Common mistakes- B (797): ignored the constant
- C (7152): added the constant instead of subtracting it
- D (734): evaluated H at 97 instead of solving
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Interpreting linear models
Method. Change in output = slope × change in input; the constant cancels.
Worked exampleThe equation W = 45d + 60 gives the weight W, in grams, of a box holding d identical books. By how many grams does W increase when d increases by 6?
AnswerB — 270
Step-by-step- The coefficient 45 is the change in W for each increase of 1 in d.
- For an increase of 6: 45 × 6 = 270 grams.
- The constant 60 does not change.
Quick checkfrom d = 1 to d = 7: 375 − 105 = 270 ✓.
Common mistakes- A (45): gave the increase for 1 unit, not 6
- C (330): added the starting value
- D (360): multiplied the starting value by 6
01.04 Systems of Two Linear Equations
A system of two linear equations is solved by substitution, by elimination or by graphing (the solution is the intersection point). PSAT/NMSQT questions also ask how many solutions a system has and which constant makes it have no solution or infinitely many solutions.
Systems of Linear Equations
Solve by substitution or elimination. Parallel lines give no solution; identical lines give infinitely many.
Key formulas| Substitution | solve one equation for a variable; substitute |
| Elimination | add multiples of equations to remove a variable |
| Graphing | solution=intersection point (x,y) |
| One solution | different slopes |
| No solution | same slope, different y-intercepts |
| Infinitely many solutions | same slope and same y-intercept (same line) |
| Coefficient test, no solution (a₁x + b₁y = c₁ and a₂x + b₂y = c₂) | a2a1=b2b1=c2c1 (nonzero coefficients) |
| Coefficient test, infinitely many solutions | a2a1=b2b1=c2c1 (nonzero coefficients) |
Systems — substitution
Method. When one equation already gives y, substitute it straight into the other.
Worked exampleWhat is the solution (x, y) of the system y = 3x + 8 and x − 5y = −12?
A(−2, 2)
B(2, −2)
C(−2, −14)
D(726,7134)
AnswerA — (−2, 2)
Step-by-step- Substitute y = 3x + 8 into the second equation: x + (−5)(3x + 8) = −12.
- So −14x − 40 = −12.
- So x = −2.
- Then y = 3(−2) + 8 = 2.
Quick check1(−2) + (−5)(2) = −12 ✓ and 3(−2) + 8 = 2 ✓.
Common mistakes- B ((2, −2)): swapped x and y
- C ((−2, −14)): used the wrong sign for b when finding y
- D ((726,7134)): used the wrong sign for the constant after substituting
Systems — elimination
Method. Scale the equations so one variable has opposite (or equal) coefficients, then add (or subtract).
Worked exampleWhat is the solution (x, y) of the system −7x + 7y = 0 and 3x + 6y = 9?
A(−1, −1)
B(1, −1)
C(1, 1)
D(−1, 1)
AnswerC — (1, 1)
Step-by-step- Multiply the first equation by 6 and the second by 7.
- Then subtract to eliminate y: (−42 − 21)x = 0 − 63.
- So −63x = −63 and x = 1.
- Substitute into the first equation: −7(1) + 7y = 0.
- So y = 1.
Quick checkCheck both equations: −7(1) + 7(1) = 0 ✓ and 3(1) + 6(1) = 9 ✓.
Common mistakes- A ((−1, −1)): made a sign error when eliminating
- B ((1, −1)): substituted x back with the wrong sign
- D ((−1, 1)): added the equations when they should have been subtracted
Systems — solving by graphing
Method. Look for the intersection point and read x first, then y.
Worked exampleThe graph shows the two lines of a system of linear equations. What is the solution of the system?

A(1, −1)
B(−1, 1)
C(0, −1)
D(0, −2)
AnswerB — (−1, 1)
Step-by-step- The solution is the point where the lines cross: (−1, 1).
- Both lines pass through it: y = −2x − 1 and y = −3x − 2.
Quick checkat x = −1, the first line gives 1 and the second gives 1; both equal y = 1.
Common mistakes- A ((1, −1)): read the coordinates in the wrong order
- C ((0, −1)): gave where the first line crosses the y-axis
- D ((0, −2)): gave where the second line crosses the y-axis
Systems — checking a solution
Method. Test each choice in BOTH equations; one failure rules it out.
Worked exampleWhich ordered pair is a solution of the system −x + 4y = −8 and 4x + 4y = −28?
A(12, 1)
B(2, −9)
C(−3, −4)
D(−4, −3)
AnswerD — (−4, −3)
Step-by-step- A solution must make both equations true.
- (−4, −3): −1(−4) + 4(−3) = −8 ✓ and 4(−4) + 4(−3) = −28 ✓.
Quick checkevery other choice fails at least one of the two equations.
Common mistakes- A ((12, 1)): checked only the first equation
- B ((2, −9)): checked only the second equation
- C ((−3, −4)): swapped the coordinates of the solution
Systems — number of solutions
Method. Compare slopes (−BA): different → one solution; same slope, different intercept → none; identical lines → infinitely many.
Worked exampleHow many solutions does the system 5x − 2y = 4 and −10x + 5y = 6 have?
Ano solution
Binfinitely many solutions
Cexactly two solutions
Dexactly one solution
AnswerD — exactly one solution
Step-by-step- Compare the equations: the coefficient ratios differ.
- So the slopes differ and the lines cross exactly once.
Quick checkslope of the first line −−25 = 25; slope of the second −5−10 = 2.
Common mistakes- A (no solution): thought different coefficients mean parallel lines
- B (infinitely many solutions): thought any two lines coincide
- C (exactly two solutions): thought two lines can meet at two points
Systems — parameter for no solution
Method. Same slope, different intercept ⇒ no solution: match the coefficient ratio.
Worked exampleIn the system 2x − 3y = 2 and kx − 6y = 0, k is a constant. For what value of k does the system have no solution?
AnswerD — 4
Step-by-step- No solution means parallel lines: the x- and y-coefficients must be in the same ratio while the constants are not.
- The y-coefficients give the ratio −−36 = 2.
- So k = 2 × 2 = 4.
- The constants 0 and 2 × 2 = 4 differ.
- So the lines are parallel.
Quick checkwith k = 4, the second left side is 2 times the first (2 × 2 = 4, 2 × (−3) = −6), but 0 ≠ 2 × 2 = 4, so the lines are parallel.
Common mistakes- A (−4): made a sign error in the matching coefficient
- B (1): scaled by the wrong factor
- C (2): matched the coefficient without scaling
Systems — parameter for infinitely many solutions
Method. Infinitely many solutions ⇔ one equation is a constant multiple of the other.
Worked exampleThe system −5x − y = −12 and px + 3y = 36 has infinitely many solutions, where p is a constant. What is the value of p?
AnswerD — 15
Step-by-step- For infinitely many solutions the second equation is a multiple of the first.
- The y-coefficients give the factor −13 = −3 (and the constants agree: −1236 = −3).
- So p = −3 × (−5) = 15.
Quick checkmultiplying −5x − y = −12 through by −3 gives 15x + 3y = 36, the same line.
Common mistakes- A (−15): made a sign error when scaling
- B (−8): added the scale factor instead of multiplying
- C (−5): did not scale the coefficient
Systems — word problems (two totals)
Method. If all 116 were adult tickets they would bring $1,044.00; each child ticket adds $9.00, so children = ($1,584.00 − $1,044.00) ÷ $9.00 = 60.
Worked exampleA theater sold 116 tickets for a total of $1,584.00. Adult tickets cost $9.00 and child tickets cost $18.00. How many child tickets were sold?
AnswerB — 60
Step-by-step- Let a = adult tickets and c = child tickets: a + c = 116 and 9a + 18c = 1584.
- Substitute c = 116 − a: 9a + 18(116 − a) = 1584.
- So −9a = −504 and a = 56.
- c = 60.
Quick check56 + 60 = 116 and 56 × $9.00 + 60 × $18.00 = $1,584.00.
Common mistakes- A (56): found the number of the other kind of ticket
- C (88): divided the total money by one price only
- D (116): gave the total number of tickets
Systems — finding an expression directly
Method. Combine the equations so the coefficients of x and y become opposite; then divide.
Worked exampleIf x + 6y = 45 and −3x + 10y = 117, what is the value of x − y?
AnswerA — −18
Step-by-step- Subtract the second equation from the first: 4x − 4y = −72, which is 4(x − y) = −72.
- So x − y = −18.
- (Here x = −9 and y = 9.)
Quick checkx = −9, y = 9 satisfies both equations and gives x − y = −18.
Common mistakes- B (−9): gave x only
- C (0): found x + y instead
- D (162): added the equations, −2x + 16y = 162, and gave the constant 162
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Mixture problems
Method. Balance the differences: 25 × (40 − 20) = y × (50 − 40).
Worked exampleHow many liters of a 50% acid solution must be added to 25 liters of a 20% acid solution to make a 40% acid solution?
AnswerC — 50
Step-by-step- Let y = liters of the 50% solution.
- Acid: 0.2(25) + 0.5y = 0.4(25 + y).
- Multiply by 100: 500 + 50y = 1000 + 40y.
- Collect: 10y = 500.
- Divide: y = 50 liters.
Quick checkacid = 5 + 25 = 30 liters, and 40% of 75 = 30 ✓.
Common mistakes- A (10): divided by 50 instead of 50 − 40
- B (25): assumed equal amounts of the two solutions
- D (75): gave the total amount of the mixture
01.05 Linear Inequalities
Linear inequalities in one or two variables describe ranges of values or regions of the plane. PSAT/NMSQT questions ask you to solve them, write them from a context with a budget or limit, and decide which points satisfy a system of inequalities.
Inequalities
Solve like equations, but reverse the inequality sign when multiplying or dividing by a negative number. In two variables, the solutions of y > mx + b lie above the line; a system of inequalities is the overlap of the regions.
Key formulas| Flip rule | −2x<6⇒x>−3 |
| Compound | a<x<b⟺x>a and x<b |
| Two variables | y>mx+b: region above the line (dashed); y≥mx+b: solid line |
| Checking a point | substitute (x,y); the inequality must be true |
Solving inequalities
Method. Solve it like an equation; the sign flips only when you multiply or divide by a negative number.
Worked exampleSolve: 5x + 4 ≤ 44
Ax ≥ 8
Bx ≤ 548
Cx < 8
Dx ≤ 8
AnswerD — x ≤ 8
Step-by-step- Subtract 4 on both sides: 5x ≤ 40.
- Divide by 5 (positive, so the sign stays): x ≤ 8.
Quick checkx = 7 works (5(7) + 4 = 39, which is ≤ 44).
Common mistakes- A (x ≥ 8): reversed the inequality sign without a reason
- B (x ≤ 548): added the constant instead of subtracting it
- C (x < 8): changed whether the endpoint is included
Solving inequalities — negative coefficient
Method. Dividing (or multiplying) both sides by a negative number reverses the inequality.
Worked exampleSolve: −4x + 13 ≥ 53
Ax ≥ −10
Bx ≤ 10
Cx ≥ 10
Dx ≤ −10
AnswerD — x ≤ −10
Step-by-step- Subtract 13: −4x ≥ 40.
- Divide by −4 and reverse the sign (dividing by a negative): x ≤ −10.
Quick checkx = −11 should work: −4(−11) + 13 = 57, which is ≥ 53.
Common mistakes- A (x ≥ −10): forgot to reverse the sign when dividing by a negative number
- B (x ≤ 10): dropped the negative sign of the coefficient but still reversed the sign
- C (x ≥ 10): divided by the positive number instead of the negative one
Inequalities with variables on both sides
Method. Collect x on one side; watch for dividing by a negative.
Worked exampleSolve: −7x − 1 ≤ 6x − 40
Ax ≤ 3
Bx ≥ 39
Cx ≥ 3
Dx ≥ 1341
AnswerC — x ≥ 3
Step-by-step- Move the x-terms to the left: −13x ≤ −39.
- Divide by −13 and reverse the sign: x ≥ 3.
Quick checkat x = 3 both sides equal −22, so 3 is the boundary; test x = 4 to confirm the direction.
Common mistakes- A (x ≤ 3): forgot to reverse the sign after dividing by a negative
- B (x ≥ 39): added the x-terms instead of subtracting
- D (x ≥ 1341): used the wrong sign when moving the constant
Testing solutions of inequalities
Method. Substitute each choice, or solve once and compare.
Worked exampleWhich value of x is a solution of −3x + 3 ≤ 0?
AnswerD — 1
Step-by-step- Solve: −3x ≤ −3.
- So x ≥ 1 (the sign reverses because we divide by a negative).
- Only 1 satisfies x ≥ 1.
Quick check−3(1) + 3 = 0, which is ≤ 0.
Common mistakes- A (−5): chose a value on the wrong side (forgot that the sign reverses)
- B (−2): chose a value on the wrong side (forgot that the sign reverses)
- C (0): chose a value on the wrong side (forgot that the sign reverses)
Compound inequalities — and
Method. Treat the middle as the target and apply each step to all three parts.
Worked exampleSolve: −4 ≤ 2x + 2 ≤ 2
A−2 ≤ x ≤ 1
B−6 ≤ x ≤ 0
C−3 ≤ x ≤ 0
D−3 < x < 0
AnswerC — −3 ≤ x ≤ 0
Step-by-step- Do the same thing to all three parts.
- Subtract 2: −6 ≤ 2x ≤ 0.
- Divide by 2: −3 ≤ x ≤ 0.
Quick checkthe endpoints come from 2x + 2 = −4 and 2x + 2 = 2: x = −3 and x = 0.
Common mistakes- A (−2 ≤ x ≤ 1): divided all three parts but did not subtract the constant
- B (−6 ≤ x ≤ 0): subtracted the constant but did not divide
- D (−3 < x < 0): switched which endpoints are included
Greatest or least integer solution
Method. Solve, then step to the nearest integer on the allowed side (exclude the boundary for < or >).
Worked exampleWhat is the greatest integer x that satisfies 2x + 2 ≤ 62?
AnswerB — 30
Step-by-step- 2x ≤ 60.
- So x ≤ 30.
- The greatest integer that works is 30.
Quick check2(30) + 2 = 62 ≤ 62 ✓, but x = 31 gives 64, which fails.
Common mistakes- A (29): stopped one integer short
- C (31): went one integer past the boundary
- D (32): added the constant instead of subtracting it
Inequality word problems
Method. Subtract the fixed fee, divide by the price, and round DOWN.
Worked exampleA pool charges a sign-up fee of $33 and $9.50 per lesson. Sam can spend at most $100. What is the greatest number of lessons he can pay for?
AnswerA — 7
Step-by-step- Let n be the number of lessons: 33 + 9.5n ≤ 100.
- Then 9.5n ≤ 67.
- So n ≤ 19134 ≈ 7.05.
- The greatest whole number is 7.
Quick check7 lessons cost $99.50 ≤ $100.00, but 8 cost $109.00.
Common mistakes- B (8): rounded up instead of down
- C (10): ignored the one-time fee
- D (14): added the fee to the budget
Two-variable inequalities — solutions
Method. Points that satisfy it lie below the line y = 3x + 3 (or on it).
Worked exampleWhich point is a solution of y ≤ 3x + 3?
A(−4, −1)
B(−5, −2)
C(−5, 2)
D(2, 6)
AnswerD — (2, 6)
Step-by-step- Substitute the point.
- For (2, 6), 3(2) + 3 = 9, and y = 6 ≤ 9 ✓.
Quick checkeach other choice gives a false statement when substituted.
Common mistakes- A ((−4, −1)): chose a point above the line
- B ((−5, −2)): chose a point above the line
- C ((−5, 2)): chose a point above the line
Two-variable inequalities — graphs
Method. Line: read the y-intercept and slope. Dashed → < or >; solid → ≤ or ≥. Above → y >; below → y <.
Worked exampleWhich inequality is shown by the graph? (The shaded region is the solution set.)

Ay < −x − 1
By ≤ −x − 1
Cy ≥ −x − 1
Dy ≤ x − 1
AnswerB — y ≤ −x − 1
Step-by-step- The boundary passes through (0, −1) with slope −1.
- So it is y = −x − 1.
- It is solid (included) and the shading is below the line: y ≤ −x − 1.
Quick checkthe test point (0, −3) is in the shaded region and satisfies y ≤ −x − 1.
Common mistakes- A (y < −x − 1): misread the dashed/solid boundary line
- C (y ≥ −x − 1): chose the wrong side of the line
- D (y ≤ x − 1): used the wrong sign for the slope
Systems of linear inequalities
Method. A solution of a system must satisfy every inequality; test each choice in both.
Worked exampleWhich point is a solution of the system y > x + 4 and y > −x + 3?
A(−5, 2)
B(0, 5)
C(2, 6)
D(1, −2)
AnswerB — (0, 5)
Step-by-step- Test (0, 5) in both.
- 5 > 4 ✓ and 5 > 3 ✓.
Quick checkeach other choice fails at least one of the two inequalities.
Common mistakes- A ((−5, 2)): checked only the first inequality
- C ((2, 6)): checked only the second inequality
- D ((1, −2)): chose a point that satisfies neither inequality
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Writing inequalities from words
Method. “At most / no more than” → ≤; “at least” → ≥; “more than” → >; “less than” → <.
Worked exampleMia pays a $5 entry fee at a fair and then $4 for each ride. Mia wants to spend at most $75 in total. Which inequality gives the possible numbers of rides n?
A5 + 4n ≤ 75
B5 + 4n ≥ 75
C4n ≤ 75
D5 + 4n < 75
AnswerA — 5 + 4n ≤ 75
Step-by-step- Total spent = fee + price × rides = 5 + 4n.
- “At most” 75 means ≤ 75.
- So 5 + 4n ≤ 75.
Quick checkthe boundary 5 + 4n = 75 gives n = 235; the sign ≤ keeps the totals that are at most 75 ✓.
Common mistakes- B (5 + 4n ≥ 75): reversed the inequality sign
- C (4n ≤ 75): left out the fixed fee
- D (5 + 4n < 75): changed whether the boundary is included
Inequalities in context
Method. Subtract the fixed cost, divide by the unit price, then round DOWN.
Worked exampleZoe has $25 to spend at a craft fair. Entry costs $4, and each bead kit costs $2.50. What is the greatest number of bead kits Zoe can buy?
AnswerA — 8
Step-by-step- Write the inequality: 4 + 2.5n ≤ 25.
- Subtract 4: 2.5n ≤ 21.
- Divide by 2.5: n ≤ 542 = 8.4.
- n must be a whole number.
- So the greatest is 8.
Quick check8 kits cost $4 + $20 = $24 ≤ $25, but 9 kits cost $26.50 > $25 ✓.
Common mistakes- B (9): rounded up instead of down
- C (10): ignored the fixed fee
- D (11): added the fee instead of subtracting it