PSAT/NMSQT · Math · Unit 02 Advanced Math

Advanced Math: Unit Study Guide

02.01 Equivalent Expressions

Equivalent expressions is an Advanced Math skill (Advanced Math is about 32.5% of the PSAT/NMSQT Math section): adding, multiplying and factoring polynomials, rewriting with exponents and radicals, and simplifying rational expressions. Many questions ask which expression is equivalent to a given one.

Polynomial Expressions

Combine like terms, distribute, and use the special-product patterns. Factor by pulling out the GCF first, then look for patterns.

Key formulas
Square of a sum
Square of a difference
Difference of squares
FOIL
Greatest common factor
Factoring a trinomial

Distributive property

Method. Multiply the outside number by EVERY term inside, keeping the sign of the outside number.

Worked example
Simplify: 4(−6x + 4) + 3(−8x − 9)
A−48x + 7
B43
C−48x − 11
D−48x − 23
AnswerC — −48x − 11
Step-by-step
  1. Distribute: 4(−6x + 4) = −24x + 16 and 3(−8x − 9) = −24x − 27.
  2. Combine: −48x − 11.
Quick checkat x = 1 the original gives −59 and −48x − 11 gives −59.
Common mistakes
  • A (−48x + 7): multiplied only the first term in the second parentheses by 3
  • B (43): subtracted the second product instead of adding
  • D (−48x − 23): multiplied only the first term in the first parentheses by 4

Multiplying a monomial by a polynomial

Method. Multiply coefficients and ADD exponents for each term.

Worked example
Simplify: −3x(4x + 5)
A−12 + 5
B−12 − 15x
C−12x − 15
D + 2x
AnswerB — −12 − 15x
Step-by-step
  1. −3x · 4x = −12 and −3x · 5 = −15x.
  2. So the product is −12 − 15x.
Quick checkat x = 1, −3x(4x + 5) = −3(9) = −27, and −12 − 15x gives −27.
Common mistakes
  • A (−12 + 5): multiplied only the first term by −3x
  • C (−12x − 15): forgot to multiply the x-powers
  • D ( + 2x): added the coefficients instead of multiplying

Adding and subtracting polynomials

Method. Line up like terms (, x, constants); with subtraction, change every sign in the second polynomial.

Worked example
Simplify: −
A10 − 3x + 2
B10 + 5x − 6
C5x − 6
D10 − 1
AnswerA — 10 − 3x + 2
Step-by-step
  1. Distribute the minus sign to every term of the second polynomial.
  2. Then combine like terms: 10 − 3x + 2.
Quick checkat x = 1 the original gives 4 − (−5) = 9, and 10 − 3x + 2 gives 9.
Common mistakes
  • B (10 + 5x − 6): changed the sign of only the first term of the second polynomial
  • C (5x − 6): added instead of subtracting
  • D (10 − 1): combined the x-terms with the constants

Multiplying binomials

Method. First, Outer, Inner, Last — then combine the two middle terms.

Worked example
Expand: (x − 4)(2x + 9)
A2 − 36
B2 + 17x − 36
C2 + x − 36
D2 + x + 36
AnswerC — 2 + x − 36
Step-by-step
  1. FOIL: first x·2x = 2.
  2. Outer x·9 = 9x.
  3. Inner −4·2x = −8x.
  4. Last −4·9 = −36.
  5. Total: 2 + x − 36.
Quick checkCheck with x = 1: (−3)(11) = −33 and 2(1) + 1 − 36 = −33.
Common mistakes
  • A (2 − 36): multiplied only the first terms and the last terms
  • B (2 + 17x − 36): subtracted the outer and inner products
  • D (2 + x + 36): made a sign error on the last term

Special products

Method. Use the patterns = ± 2pq + and (p + q)(p − q) = − .

Worked example
Expand: (3x − 3)(3x + 3)
A9 + 9
B9 − 18x + 9
C9x − 9
D9 − 9
AnswerD — 9 − 9
Step-by-step
  1. (p + q)(p − q) = − : − 9 = 9 − 9.
  2. The middle terms cancel.
Quick checkat x = 1 the original gives 0 and 9 − 9 gives 0.
Common mistakes
  • A (9 + 9): used + for the last term
  • B (9 − 18x + 9): multiplied as if the expression were
  • C (9x − 9): wrote as 9x instead of 9

Factoring — greatest common factor

Method. Find the largest number and the lowest power of x that divide every term.

Worked example
Factor completely: 20 + 24 − 8x
A4
B4x
C2x
D4x
AnswerB — 4x
Step-by-step
  1. Every term contains 4x: 20 + 24 − 8x = 4x.
  2. The trinomial 5 + 6x − 2 has no common factor left.
Quick checkdistribute 4x back to get 20 + 24 − 8x.
Common mistakes
  • A (4): factored out only the number, not the variable
  • C (2x): took out 2x instead of the greatest common factor 4x
  • D (4x): did not divide the last term by 4

Factoring trinomials (leading coefficient 1)

Method. Product = c, sum = b; the signs of c and b tell you the signs of the two numbers.

Worked example
Factor: − 4x − 12
A(x + 6)(x − 2)
B(x − 6)(x + 2)
C(x − 6)(x − 2)
D(x − 1)(x + 12)
AnswerB — (x − 6)(x + 2)
Step-by-step
  1. Find two numbers with product −12 and sum −4: −6 and 2.
  2. So − 4x − 12 = (x − 6)(x + 2).
Quick check(x − 6)(x + 2) = + (−6 + 2)x + (−6)(2) = − 4x − 12.
Common mistakes
  • A ((x + 6)(x − 2)): used the wrong signs in both factors
  • C ((x − 6)(x − 2)): used the wrong sign in one factor
  • D ((x − 1)(x + 12)): chose a factor pair of −12 that does not add to −4

Factoring trinomials (leading coefficient ≠ 1)

Method. Check the outer and inner products of each candidate against the middle coefficient.

Worked example
Factor: 6 − 13x − 5
A(3x − 5)(2x + 1)
B(3x − 1)(2x + 5)
C(3x + 1)(2x + 5)
D(3x + 1)(2x − 5)
AnswerD — (3x + 1)(2x − 5)
Step-by-step
  1. Use the ac-method: a·c = −30.
  2. Find two numbers with product −30 and sum −13: −15 and 2.
  3. Split the middle term and group: 6 − 15x + 2x − 5 = 3x(2x − 5) + 1(2x − 5) = (3x + 1)(2x − 5).
Quick checkouter 3·(−5) + inner 1·2 = −15 + 2 = −13 ✓.
Common mistakes
  • A ((3x − 5)(2x + 1)): placed the constants in the wrong factors
  • B ((3x − 1)(2x + 5)): used the wrong signs in both factors
  • C ((3x + 1)(2x + 5)): used the wrong sign in one factor

Factoring — difference of squares

Method. − = (p + q)(p − q); take out any common factor first.

Worked example
Factor completely: 245 − 80
A5(7x + 4)(7x − 4)
B5(7x − 4)(7x − 4)
C5(7x + 4)(7x + 4)
D5(49x + 4)(x − 4)
AnswerA — 5(7x + 4)(7x − 4)
Step-by-step
  1. Take out the common factor 5: 5.
  2. 49 − 16 = − = (7x + 4)(7x − 4).
  3. So 245 − 80 = 5(7x + 4)(7x − 4).
Quick check(7x + 4)(7x − 4) = 49 − 16, times 5 gives 245 − 80.
Common mistakes
  • B (5(7x − 4)(7x − 4)): wrote a perfect square instead of a difference of squares
  • C (5(7x + 4)(7x + 4)): used + in both factors
  • D (5(49x + 4)(x − 4)): did not take the square root of the coefficient

Factoring by grouping

Method. Pair the terms, factor each pair, then factor out the common binomial.

Worked example
Factor: −5 + 6 + 10x − 12
A(−5x + 6)
B(−5x − 6)
C(−5x + 6)
D(−5x + 6)(x − 2)
AnswerA — (−5x + 6)
Step-by-step
  1. Group the first two terms and the last two terms: + (10x − 12).
  2. Factor out of the first group and −2 out of the second: (−5x + 6) − 2(−5x + 6).
  3. Factor out the common binomial (−5x + 6): (−5x + 6).
Quick check(−5x + 6) expands to −5 + 6 + 10x − 12.
Common mistakes
  • B ((−5x − 6)): made a sign error when factoring the first group
  • C ((−5x + 6)): made a sign error when factoring the second group
  • D ((−5x + 6)(x − 2)): wrote x instead of in the common factor

Rational Expressions and Equations

Factor, cancel common factors, and note excluded values. For equations, multiply by the LCD and check for extraneous solutions.

Key formulas
Excluded values
Multiply
Divide
Add

Simplifying rational expressions

Method. Factor top and bottom completely, then cancel common FACTORS (never individual terms).

Worked example
Simplify, for values of x where the expression is defined:
A
B
C
D
AnswerC —
Step-by-step
  1. Factor the numerator: − x − 12 = (x + 3)(x − 4).
  2. Factor the denominator: + 12x + 27 = (x + 3)(x + 9).
  3. Cancel the common factor (x + 3): .
Quick checkat x = 0 the original is − and the simplified form is −.
Common mistakes
  • A (): used the wrong signs after cancelling
  • B (): made a sign error in the denominator
  • D (): inverted the fraction

Multiplying and dividing rational expressions

Method. Factor everything, flip the divisor, then cancel common factors.

Worked example
Simplify: [] ÷ [] (for values of x where it is defined)
A
B
C
D
AnswerA —
Step-by-step
  1. Dividing by a fraction means multiplying by its reciprocal: · .
  2. Cancel (x − 3): .
Quick checkCheck at x = 0: the original gives and the answer gives .
Common mistakes
  • B (): multiplied instead of dividing
  • C (): flipped the first fraction instead of the second
  • D (): made a sign error

Adding and subtracting rational expressions

Method. Cross-multiply: ± = [a(x+q) ± b(x+p)] / [(x+p)(x+q)].

Worked example
Write as a single fraction: +
A
B
C
D
AnswerC —
Step-by-step
  1. The common denominator is (x + 1)(x + 7) = + 8x + 7.
  2. Rewrite: 5(x + 7) + (−5)(x + 1) over + 8x + 7.
  3. Expand the numerator: 5x + 35 + (−5x − 5) = 30.
  4. Result: .
Quick checkCheck at x = 0: 5 + = and .
Common mistakes
  • A (): added the numerators without using a common denominator
  • B (): added the numerators and added the denominators
  • D (): used the wrong sign for the second numerator

Exponents and Radicals

Exponents count repeated multiplication, and radicals undo powers. Most PSAT/NMSQT items test the exponent laws, negative and fractional exponents, and simplifying or combining square roots.

Key formulas
Product rule
Quotient rule
Power rule
Power of a product
Zero exponent
Negative exponent
Fractional exponent
Product of roots
Rationalizing
Common base

Rationalize the denominator

Method. Use = a: multiply the top by and divide by 6.

Worked example
Which is equal to with a rational denominator?
A4
B24
C4
D144
AnswerA — 4
Step-by-step
  1. Multiply top and bottom by .
  2. = 24.
  3. So = 4.
Quick check4 ≈ 9.7980 and ≈ 9.7980.
Common mistakes
  • B (24): multiplied only the top by the root
  • C (4): cancelled the root sign as if were 6
  • D (144): multiplied the top by 6 instead of and did not divide by 6

Exponent laws with fractional exponents

Method. The laws are the same for fraction exponents; add them with a common denominator.

Worked example
Which expression is equal to · ? (Assume y > 0.)
A
B
C
D
AnswerC —
Step-by-step
  1. Same base.
  2. So add the exponents: + = .
  3. Answer: .
Quick checkRename with denominator 10: = and = ; their sum is .
Common mistakes
  • A (): multiplied the exponents instead of adding them
  • B (): added the tops and the bottoms of the exponents
  • D (): subtracted the exponents

02.02 Nonlinear Equations and Systems

This skill covers solving nonlinear equations in one variable — quadratic, radical, rational, absolute value and exponential with a common base — and systems that pair a line with a parabola (or two parabolas). Watch for extraneous solutions and use the discriminant to count solutions.

Quadratic Equations

Solve by factoring, square roots, completing the square or the quadratic formula. The discriminant tells how many real solutions there are.

Key formulas
Standard form
Zero-product property
Quadratic formula
Discriminant
Number of real solutions
Sum and product of roots
Completing the square

Zero-product property

Method. Set each factor equal to 0; each root is the opposite of the number in its factor.

Worked example
Solve: (x + 6)(x + 10) = 0
Ax = 6 or x = 10
Bx = −10 or x = −6
Cx = −6 or x = 10
Dx = −10 or x = 6
AnswerB — x = −10 or x = −6
Step-by-step
  1. A product is 0 only when a factor is 0.
  2. x + 6 = 0 gives x = −6.
  3. x + 10 = 0 gives x = −10.
  4. So x = −10 or x = −6.
Quick checkat x = −6 the first factor is 0, so the product is 0.
Common mistakes
  • A (x = 6 or x = 10): used the numbers in the factors with their signs instead of the zeros
  • C (x = −6 or x = 10): changed the sign of only one root
  • D (x = −10 or x = 6): changed the sign of only the other root

Solving by factoring

Method. Get 0 on one side, factor, then set each factor to 0.

Worked example
Solve: − 3x − 8 = 2
Ax = −5 or x = 2
Bx = −2 or x = 5
Cx = 2 or x = 5
Dx = −10 or x = 1
AnswerB — x = −2 or x = 5
Step-by-step
  1. Move everything to one side: − 3x − 10 = 0.
  2. Factor: (x − 5)(x + 2) = 0, since (−5)(2) = −10 and −5 + 2 = −3.
  3. Zero-product property: x = −2 or x = 5.
Quick check + (−3)(5) + (−10) = 0 ✓.
Common mistakes
  • A (x = −5 or x = 2): used the numbers from the factors without changing their signs
  • C (x = 2 or x = 5): made a sign error on one root
  • D (x = −10 or x = 1): chose a factor pair of −10 that does not add to −3

Solving by factoring (leading coefficient ≠ 1)

Method. Use the ac-method (or test rational roots ±(factors of c)/(factors of a)).

Worked example
Solve: 20 − 51x + 28 = 0
Ax = − or x = −
Bx = or x =
Cx = 4 or x = 7
Dx = 1 or x =
AnswerB — x = or x =
Step-by-step
  1. Factor: (4x − 7)(5x − 4) = 0.
  2. Set each factor to 0: 4x − 7 = 0 gives x = .
  3. 5x − 4 = 0 gives x = .
Quick checkthe roots add to − = and multiply to = : and ✓.
Common mistakes
  • A (x = − or x = −): solved each factor with the wrong sign
  • C (x = 4 or x = 7): forgot to divide by the x-coefficient in each factor
  • D (x = 1 or x = ): divided by the wrong coefficients

Square-root method

Method. Isolate the squared bracket, take the ± square root of both sides, then undo the shift inside the bracket.

Worked example
Solve: = 27
Ax = −6 ± 3
Bx = 6 + 3
Cx = −21 or x = 33
Dx = 6 ± 3
AnswerD — x = 6 ± 3
Step-by-step
  1. Take square roots: x − 6 = ± = ±3.
  2. Add 6 (move the constant): x = 6 ± 3.
Quick checksubstituting either root makes equal 27.
Common mistakes
  • A (x = −6 ± 3): used the wrong sign for h
  • B (x = 6 + 3): forgot the negative square root
  • C (x = −21 or x = 33): forgot to take the square root

Completing the square

Method. Shortcut: + bx + c = 0 becomes = − c.

Worked example
Which equation is equivalent to + 6x − 22 = 0 after completing the square?
A = −13
B = 58
C = 31
D = 31
AnswerD — = 31
Step-by-step
  1. Move the constant: + 6x = 22.
  2. Half of 6 is 3, and = 9.
  3. Add it to both sides: + 6x + 9 = 31.
  4. Write the left side as a square: = 31.
Quick checkexpanding − 31 gives + 6x − 22.
Common mistakes
  • A ( = −13): added the constant instead of subtracting it
  • B ( = 58): used b instead of
  • C ( = 31): used the wrong sign inside the square

The discriminant

Method. Sign of − 4ac: positive → 2, zero → 1, negative → 0 real solutions.

Worked example
How many real solutions does + 12x − 8 = 0 have?
Ano real solutions
Btwo distinct real solutions
Cexactly one real solution
Dinfinitely many real solutions
AnswerB — two distinct real solutions
Step-by-step
  1. Discriminant: − 4ac = − 4(1)(−8) = 144 − (−32) = 176.
  2. It is positive.
  3. So there are two distinct real solutions.
Quick check − 4ac = 176 > 0, which matches the answer.
Common mistakes
  • A (no real solutions): thought the negative constant term makes the discriminant negative
  • C (exactly one real solution): thought the discriminant was 0
  • D (infinitely many real solutions): confused a quadratic with an identity

Quadratic word problems — area

Method. Look for two numbers 2 apart whose product is 360: 18 and 20.

Worked example
A rectangle's length is 2 meters more than its width, and its area is 360 square meters. What is its width, in meters?
A18
B20
C179
D180
AnswerA — 18
Step-by-step
  1. Let w be the width: w(w + 2) = 360.
  2. So + 2w − 360 = 0.
  3. Factor: (w − 18)(w + 20) = 0.
  4. So w = 18 (a width cannot be negative).
  5. Length = 18 + 2 = 20.
Quick check18 × 20 = 360 and 20 − 18 = 2.
Common mistakes
  • B (20): gave the length
  • C (179): solved w + (w + d) = area
  • D (180): halved the area

Quadratic formula

Method. Compute the discriminant first, simplify its square root, then divide every term by 2a.

Worked example
Solve: − 10x − 9 = 0
Ax = 5 ±
Bx = −5 ±
Cx = 10 ± 2
Dx = 10 ± 2
AnswerA — x = 5 ±
Step-by-step
  1. a = 1, b = −10, c = −9.
  2. Discriminant: − 4ac = 100 − 4(1)(−9) = 136.
  3. x = = = , which simplifies to 5 ± .
Quick checkthe roots add to − = 10 and multiply to = −9.
Common mistakes
  • B (x = −5 ± ): used +b instead of −b
  • C (x = 10 ± 2): divided by a instead of 2a
  • D (x = 10 ± 2): divided only the square root by 2a

Parameters — exactly one solution

Method. Exactly one real solution ⇔ − 4ac = 0.

Worked example
For what value of k does + 12x + k = 0 have exactly one real solution?
A−36
B6
C36
D144
AnswerC — 36
Step-by-step
  1. One real solution means the discriminant is 0: − 4(1)k = 0.
  2. So 144 = 4k and k = 36.
Quick checkwith k = 36 the discriminant is 0.
Common mistakes
  • A (−36): made a sign error
  • B (6): used instead of
  • D (144): forgot to divide by 4a

Equations quadratic in form

Method. Substitute u for the repeated expression, solve the quadratic in u, then convert back to x.

Worked example
Solve: − 52 + 576 = 0
Ax = −6 or x = −4 or x = 4 or x = 6
Bx = 4 or x = 6
Cx = 16 or x = 36
Dx = −36 or x = −16
AnswerA — x = −6 or x = −4 or x = 4 or x = 6
Step-by-step
  1. Let u = : − 52u + 576 = 0.
  2. So (u − 16)(u − 36) = 0 and u = 16 or u = 36.
  3. Then = 16 gives x = ±4 and = 36 gives x = ±6.
Quick checksubstitute each value back into the original equation.
Common mistakes
  • B (x = 4 or x = 6): kept only the positive square roots
  • C (x = 16 or x = 36): solved for but did not take square roots
  • D (x = −36 or x = −16): used the wrong signs and forgot the square roots

Radical Equations

Isolate the radical, raise both sides to the matching power, solve, and always check: squaring can create extraneous solutions.

Key formulas
Square both sides
Cube both sides
Rational exponent
Check

Solving square-root equations

Method. Square both sides to remove the radical, then solve the linear equation and check.

Worked example
Solve: = 4
Ax = −8
Bx = 28
Cx = 4
Dx = −4
AnswerC — x = 4
Step-by-step
  1. Square both sides: x + 12 = 16.
  2. Subtract 12: x = 4.
Quick checksubstitute x = 4: 4 + 12 = 16, and = 4 ✓.
Common mistakes
  • A (x = −8): did not square the right side
  • B (x = 28): added the constant instead of subtracting it
  • D (x = −4): doubled instead of squaring

Radical equations — isolate first

Method. Isolate the radical before squaring; a square root can never equal a negative number.

Worked example
Solve: + 9 = 14
Ax = 116
Bx = 188
Cx = 6
Dx = 26
AnswerD — x = 26
Step-by-step
  1. Isolate the radical: = 14 − 9 = 5.
  2. Square both sides: x − 1 = 25.
  3. So x = 26.
  4. Check: + 9 = 5 + 9 = 14 ✓.
Quick checksubstitute the answer into the original equation (not the squared one).
Common mistakes
  • A (x = 116): squared each term separately instead of isolating the radical first
  • B (x = 188): squared before subtracting the constant
  • C (x = 6): did not square after isolating the radical

Cube-root equations

Method. Cube both sides; cube roots of negative numbers are allowed, so there is no extraneous check for sign.

Worked example
Solve: = 2
Ax = 8
Bx = 10
Cx = 7
Dx = 9
AnswerB — x = 10
Step-by-step
  1. Cube both sides: 2x − 12 = = 8.
  2. Add 12: 2x = 20.
  3. Divide by 2: x = 10.
Quick checksubstitute x = 10: 2x − 12 becomes 8, and = 2 ✓.
Common mistakes
  • A (x = 8): squared instead of cubing
  • C (x = 7): did not cube the right side
  • D (x = 9): multiplied by 3 instead of cubing

Equations with two radicals

Method. Square both sides, solve, then make sure the expressions under the roots are not negative.

Worked example
Solve: =
Ax = 4
Bx =
Cno solution
Dx = 14
AnswerC — no solution
Step-by-step
  1. Square both sides: 2x − 9 = 3x + 5.
  2. Then −x = 14.
  3. So x = −14.
  4. Check: the radicands equal −37 < 0.
  5. So the square roots are not real — no solution.
Quick checkat x = −14, 2x − 9 = −37 and 3x + 5 = −37.
Common mistakes
  • A (x = 4): added the constants instead of subtracting
  • B (x = ): added the x-coefficients instead of subtracting
  • D (x = 14): made a sign error moving the constants

Radical models

Method. Isolate the square root first, then square.

Worked example
The speed v, in feet per second, of an object dropped from a height of h feet is modeled by v = 8. For what value of h is the speed 56 feet per second?
A49
B392
C448
D2304
AnswerA — 49
Step-by-step
  1. Substitute: 56 = 8.
  2. Divide by 8: = 7.
  3. Square: h = 49 feet.
Quick check8 = 8 × 7 = 56 ✓.
Common mistakes
  • B (392): squared 56 but divided by 8 instead of by = 64: 3136 ÷ 8 = 392
  • C (448): multiplied by 8 instead of dividing and did not square
  • D (2304): subtracted 8 instead of dividing, then squared: = 2304

Radical equations — extraneous solutions

Method. Squaring can create extra roots — always substitute back into the ORIGINAL equation.

Worked example
Solve: = x + 1
Ax = 2
Bx = −3 or x = 2
Cx = −3
Dno solution
AnswerA — x = 2
Step-by-step
  1. Square both sides: x + 7 = = + 2x + 1.
  2. Rearrange: + x − 6 = 0.
  3. Factor: (x + 3)(x − 2) = 0.
  4. So x = −3 or x = 2.
  5. Check x = −3: the right side x + 1 = −2 is negative, but a square root cannot be negative.
  6. So it is extraneous.
  7. Check x = 2: = 3 ✓.
Quick check = 3 and (2) + 1 = 3.
Common mistakes
  • B (x = −3 or x = 2): kept the extraneous solution
  • C (x = −3): kept only the extraneous solution
  • D (no solution): rejected both solutions

Rational-exponent equations

Method. Undo by raising to the reciprocal power ; if m is even, include ±.

Worked example
Solve for real x: = 9
Ax = 243
Bx = −243 or x = 243
Cx = − or x =
Dx = −3 or x = 3
AnswerB — x = −243 or x = 243
Step-by-step
  1. = 9 means = 9.
  2. Take ± the square root: = ±3.
  3. Raise both sides to the power 5: x = = ±243.
  4. Both values work because the even power removes the sign.
Quick check = = = 9 ✓.
Common mistakes
  • A (x = 243): forgot the negative solution from the even power
  • C (x = − or x = ): multiplied by instead of raising to the power
  • D (x = −3 or x = 3): took the root but did not raise to the power

Rational Expressions and Equations

Factor, cancel common factors, and note excluded values. For equations, multiply by the LCD and check for extraneous solutions.

Key formulas
Excluded values
Multiply
Divide
Add

Solving rational equations

Method. Clear the fractions by multiplying by the LCD (or cross-multiply), solve, then check the excluded values.

Worked example
Solve: =
Ax = −6 or x = 8
Bx = −8
Cx = −3 or x = 1
Dx = −8 or x = 6
AnswerD — x = −8 or x = 6
Step-by-step
  1. Cross-multiply: (x + 3)(x − 1) = (3)(15) = 45.
  2. Expand and move everything to one side: + 2x − 48 = 0.
  3. Factor: (x + 8)(x − 6) = 0.
  4. So x = −8 or x = 6.
  5. Neither value makes x − 1 = 0.
  6. So both are valid.
Quick checksubstitute each solution into the original equation; both sides agree and no denominator is 0.
Common mistakes
  • A (x = −6 or x = 8): made a sign error when factoring
  • B (x = −8): kept only one solution
  • C (x = −3 or x = 1): set each factor to zero instead of cross-multiplying

Extraneous solutions

Method. After solving, always test each answer in the original denominators.

Worked example
Solve: =
Ax = 1 or x = 3
Bx = 1
Cx = 3
Dno solution
AnswerC — x = 3
Step-by-step
  1. The denominators are equal.
  2. So set the numerators equal (x ≠ 1): − 4x = −3.
  3. Move everything to one side: − 4x + 3 = 0.
  4. Factor: (x − 1)(x − 3) = 0.
  5. So x = 1 or x = 3.
  6. Reject x = 1: it makes the denominator 0 (extraneous).
  7. The only solution is x = 3.
Quick checkat x = 3 the denominator is 2 ≠ 0 and both sides equal −.
Common mistakes
  • A (x = 1 or x = 3): kept the extraneous solution
  • B (x = 1): kept only the extraneous solution
  • D (no solution): rejected the valid solution as well

Nonlinear Systems

Substitute the linear equation into the nonlinear one and solve the resulting quadratic. The number of real solutions equals the number of intersection points.

Key formulas
Line and parabola
Intersections

Linear–quadratic systems — solutions

Method. Set the two expressions for y equal, factor, then use the LINE to get each y.

Worked example
Which gives all solutions (x, y) of the system y = − 4x + 5 and y = 2x − 3?
A(2, 1) and (4, 5)
B(2, 4) and (4, 8)
C(2, 1)
D(4, 5)
AnswerA — (2, 1) and (4, 5)
Step-by-step
  1. Substitute the line into the parabola: 2x − 3 = − 4x + 5.
  2. Move everything to one side: − 6x + 8 = 0.
  3. Factor: (x − 2)(x − 4) = 0.
  4. So x = 2 or x = 4.
  5. Find y from the line: x = 2 gives y = 2(2) − 3 = 1.
  6. x = 4 gives y = 2(4) − 3 = 5.
  7. The solutions are (2, 1) and (4, 5).
Quick checkat x = 2 the parabola gives 4 − 8 + 5 = 1 and the line gives 1 ✓; at x = 4 the parabola gives 16 − 16 + 5 = 5 and the line gives 5 ✓.
Common mistakes
  • B ((2, 4) and (4, 8)): dropped the constant term of the line when finding y, using y = 2x
  • C ((2, 1)): kept only one solution
  • D ((4, 5)): kept only one solution

Solving systems graphically

Method. Solutions are the crossing points of the two graphs — read them from the grid.

Worked example
The graph shows a parabola and a line. Which point is a solution of the system formed by their equations?
Figure for the worked example
A(1, −5)
B(0, −2)
C(−4, 2)
D(2, −4)
AnswerD — (2, −4)
Step-by-step
  1. A solution of the system is a point where the parabola and the line cross.
  2. The graphs cross at (−1, −1) and (2, −4).
  3. Of the choices, only (2, −4) is one of these points.
Quick checkthe parabola is y = − 2x − 4 and the line is y = −x − 2; at x = 2 both give y = −4 ✓.
Common mistakes
  • A ((1, −5)): picked the vertex of the parabola
  • B ((0, −2)): picked the y-intercept of the line
  • C ((−4, 2)): swapped the x- and y-coordinates

Linear–quadratic systems — sums of coordinates

Method. Use the sum of the roots (−p) of the combined quadratic instead of solving.

Worked example
The system y = − 6x + 1 and y = −2x + 1 has two solutions (x₁, y₁) and (x₂, y₂). What is y₁ + y₂?
A−8
B−7
C−6
D4
AnswerC — −6
Step-by-step
  1. Set the expressions equal: − 6x + 1 = −2x + 1.
  2. Move everything to one side: − 4x = 0.
  3. So x₁ + x₂ = 4.
  4. Each y comes from the line: y₁ + y₂ = −2(x₁ + x₂) + 2 · 1 = −8 + 2 = −6.
Quick checkthe points are (4, −7) and (0, 1), and −7 + 1 = −6 ✓.
Common mistakes
  • A (−8): forgot to add the intercept for each point
  • B (−7): added the intercept only once
  • D (4): gave the sum of the x-coordinates

Tangency — discriminant

Method. For y = + px + q and a line of slope m: k = q − .

Worked example
For what value of k does the line y = k intersect the parabola y = − 2x − 3 at exactly one point?
A−7
B−5
C−4
D−2
AnswerC — −4
Step-by-step
  1. Substitute: − 2x − 3 = k.
  2. Move everything to one side: − 2x + (−3 − k) = 0.
  3. Tangent means exactly one solution.
  4. So the discriminant is 0: − 4(−3 − k) = 0.
  5. So 4 − (−12) + 4k = 0.
  6. Solve: 4k = −16.
  7. So k = −4.
Quick checkwith k = −4 the equation becomes = 0, a double root ✓.
Common mistakes
  • A (−7): left out the 4 in − 4ac
  • B (−5): used 2 instead of 4 in − 4ac
  • D (−2): made a sign error solving the discriminant equation

Quadratic–quadratic systems

Method. Subtract one equation from the other to get a single quadratic in x.

Worked example
Which gives all solutions (x, y) of the system y = + 3x − 4 and y = − + 5x?
A(−2, −6) and (1, 0)
B(−1, −6) and (2, 6)
C(2, 6)
D(−6, −1) and (6, 2)
AnswerB — (−1, −6) and (2, 6)
Step-by-step
  1. Set the two expressions equal: + 3x − 4 = − + 5x.
  2. Move everything to one side: 2 − 2x − 4 = 0.
  3. Divide by 2: − x − 2 = 0.
  4. Factor: (x − 2)(x + 1) = 0.
  5. So x = 2 or x = −1.
  6. Find y from the first equation: x = 2 gives y = 6.
  7. x = −1 gives y = −6.
  8. The solutions are (−1, −6) and (2, 6).
Quick checkat x = 2 the first equation gives 6 and the second gives 6 ✓; at x = −1 they give −6 and −6 ✓.
Common mistakes
  • A ((−2, −6) and (1, 0)): made a sign error when factoring
  • C ((2, 6)): kept only one solution
  • D ((−6, −1) and (6, 2)): swapped the x- and y-coordinates

Absolute Value

Absolute value is distance from 0. Split |expression| = k into two equations; check that k is not negative.

Key formulas
Equation
Negative right side
Two absolute values
Vertex of y = a|x − h| + k

Absolute-value equations

Method. |stuff| = c > 0 → stuff = c or stuff = −c; c = 0 → one solution; c < 0 → none.

Worked example
Solve: |2x − 6| = 0
Ax = −3 or x = 3
Bx = 3
Cno solution
Dx = −3
AnswerB — x = 3
Step-by-step
  1. An absolute value is 0 only when the inside is 0: 2x − 6 = 0.
  2. So x = 3.
Quick check|2(3) − 6| = |0| = 0 ✓.
Common mistakes
  • A (x = −3 or x = 3): gave two solutions although |…| = 0 has one
  • C (no solution): thought |…| = 0 has no solution
  • D (x = −3): made a sign error

Absolute-value equations — isolate first

Method. Isolate the absolute value first (undo + and ×), then split into ± cases.

Worked example
Solve: 3|x − 6| + 6 = −3
Ax = −3 or x = 15
Bx = −9 or x = −3
Cx = 9
Dno solution
AnswerD — no solution
Step-by-step
  1. Subtract 6: 3|x − 6| = −9.
  2. Divide by 3: |x − 6| = −3.
  3. An absolute value cannot be negative.
  4. So there is no solution.
Quick check3|…| + 6 ≥ 6 > −3 for every x.
Common mistakes
  • A (x = −3 or x = 15): subtracted 6 but did not divide by 3
  • B (x = −9 or x = −3): used the wrong sign for the shift inside the bars
  • C (x = 9): forgot the second case

Equations with two absolute values

Method. |x − a| = |x − b| ⇒ x = .

Worked example
Solve: |x + 11| = |x + 6|
Ax = −
Bx = −
Cx = −11 or x = −6
Dx = −17
AnswerB — x = −
Step-by-step
  1. Equal distances from −11 and −6 means x is the midpoint.
  2. Algebra: either x − (−11) = x − (−6) (impossible since −11 ≠ −6) or x − (−11) = −(x − (−6)).
  3. So 2x = −17 and x = −.
Quick check|− − (−11)| = and |− − (−6)| = .
Common mistakes
  • A (x = −): subtracted instead of adding
  • C (x = −11 or x = −6): gave the two points instead of the midpoint
  • D (x = −17): forgot to divide by 2

02.03 Nonlinear Functions

Nonlinear functions on the PSAT/NMSQT are mainly quadratic and exponential, with some polynomial and absolute value functions. Connect each form of the equation to its graph (vertex, intercepts, growth or decay) and interpret the constants in a model.

Quadratic Functions

Parabolas: the vertex is the turning point, the axis of symmetry passes through it, and the sign of a tells whether the parabola opens up or down.

Key formulas
Vertex form
Axis of symmetry
y-intercept
Factored form
Vertex from factored form
Opens up (a > 0)
Opens down (a < 0)

Vertex and axis from standard form

Method. x-vertex = −; plug it back in for the y-coordinate.

Worked example
What is the vertex of the graph of f(x) = − 8x + 23?
A(−4, 71)
B(4, 7)
C(8, 23)
D(4, 23)
AnswerB — (4, 7)
Step-by-step
  1. The x-coordinate of the vertex is − = − = 4.
  2. The y-coordinate is f(4) = 16 − 32 + 23 = 7.
  3. So the vertex is (4, 7).
Quick checkin vertex form f(x) = + 7, which expands to − 8x + 23 ✓.
Common mistakes
  • A ((−4, 71)): used instead of −
  • C ((8, 23)): forgot the 2 in −
  • D ((4, 23)): used c as the y-coordinate

Vertex form

Method. Vertex form: change the sign inside the parentheses, keep the sign of k.

Worked example
What is the vertex of the graph of f(x) = 2 + 5?
A(3, 5)
B(−3, −5)
C(−3, 5)
D(5, −3)
AnswerC — (−3, 5)
Step-by-step
  1. In vertex form f(x) = a + k the vertex is (h, k).
  2. Here x + 3 = x − (−3).
  3. So h = −3, and k = 5.
  4. The vertex is (−3, 5).
Quick checkf(−3) = 2 + 5 = 5, and every other x gives a value above 5 ✓.
Common mistakes
  • A ((3, 5)): used the sign inside the parentheses
  • B ((−3, −5)): used the wrong sign for k
  • D ((5, −3)): swapped the coordinates

Maximum and minimum values

Method. Maximum value = f, the y-coordinate of the vertex.

Worked example
What is the maximum value of f(x) = −2 + 8x + 4?
A−20
B2
C4
D12
AnswerD — 12
Step-by-step
  1. a = −2 is negative.
  2. So the parabola opens down and has a maximum at the vertex.
  3. x = − = 2.
  4. f(2) = −8 + 16 + 4 = 12.
  5. The maximum value is 12.
Quick checkf(1) = 10 and f(3) = 10 are both less than 12 ✓.
Common mistakes
  • A (−20): used the wrong sign for the x-coordinate of the vertex
  • B (2): gave the x-value where the maximum occurs
  • C (4): gave the y-intercept

Factored form and intercepts

Method. Factored form a(x − p)(x − q): zeros p and q, vertex halfway, y-intercept a·p·q.

Worked example
What are the x-intercepts of the graph of f(x) = −(x + 1)(x + 4)?
Ax = −4 and x = −1
Bx = 1 and x = 4
Cx = −1 and x = 4
Dx = 1 and x = −4
AnswerA — x = −4 and x = −1
Step-by-step
  1. x-intercepts are where f(x) = 0.
  2. A product is 0 when a factor is 0: x + 1 = 0 gives x = −1.
  3. x + 4 = 0 gives x = −4.
  4. So x = −4 and x = −1.
Quick checkf(−1) = −(0)(3) = 0 and f(−4) = −(−3)(0) = 0 ✓.
Common mistakes
  • B (x = 1 and x = 4): used the signs shown in the factors
  • C (x = −1 and x = 4): changed the sign of only the zero from the factor x + 4
  • D (x = 1 and x = −4): changed the sign of only the zero from the factor x + 1

Projectile models

Method. Time of max = −; max height = h of that time.

Worked example
A ball is thrown upward. Its height, in feet, after t seconds is h(t) = −16 + 96t + 64. What is the maximum height of the ball, in feet?
A3
B64
C208
D352
AnswerC — 208
Step-by-step
  1. The maximum is at the vertex: t = − = − = 3 seconds.
  2. h(3) = −16 + 96(3) + 64 = −144 + 288 + 64 = 208.
Quick checkh(2.5) = 204 and h(3.5) = 204 are both lower than 208 ✓.
Common mistakes
  • A (3): gave the time of the maximum instead of the height
  • B (64): used t = instead of t =
  • D (352): forgot the −16 term

Graphs of quadratic functions

Method. Read the vertex from the grid; check the direction and the step from the vertex for a.

Worked example
The graph of a quadratic function is shown. What is the vertex of the graph?
Figure for the worked example
A(3, −4)
B(−4, 3)
C(4, 3)
D(−4, −3)
AnswerB — (−4, 3)
Step-by-step
  1. The vertex is the turning point of the parabola: its lowest point.
  2. Reading the grid, it is at x = −4, y = 3.
  3. So the vertex is (−4, 3).
Quick checkthe graph passes through (−3, 5) and (−5, 5), one unit either side of the vertex ✓.
Common mistakes
  • A ((3, −4)): swapped the coordinates
  • C ((4, 3)): misread the sign of the x-coordinate
  • D ((−4, −3)): misread the sign of the y-coordinate

Area optimization

Method. Write area as a quadratic in one side; the maximum is at the vertex.

Worked example
A rectangular garden is enclosed by 48 meters of fence on all four sides. What is the greatest possible area of the garden, in square meters?
A144
B288
C576
D2304
AnswerA — 144
Step-by-step
  1. Let the width be w.
  2. Then the length is 24 − w and A(w) = w(24 − w) = − + 24w.
  3. The vertex is at w = = 12.
  4. So the garden is a 12 × 12 square.
  5. Area = = 144.
Quick checka 11 × 13 rectangle uses the same fence but has area 143 < 144 ✓.
Common mistakes
  • B (288): used the formula for a fence along a wall
  • C (576): used half the perimeter as the side
  • D (2304): squared the perimeter

Exponential Functions

Growth or decay by a constant factor each step. For f(x) = a·bˣ with a > 0, a base b > 1 means growth and 0 < b < 1 means decay; the y-intercept is (0, a).

Key formulas
Exponential function
Growth / decay
Half-life
Doubling
Compound interest

Repeated multiplication

Method. Growth by a factor each period: start × facto.

Worked example
A colony starts with 20 bacteria, and the number doubles every hour. How many bacteria are there after 4 hours?
A16
B28
C160
D320
AnswerD — 320
Step-by-step
  1. Each hour multiplies the number by 2.
  2. After 4 hours: 20 × = 20 × 16 = 320.
Quick check20 → 40 → 80 → 160 → 320 after 4 steps ✓.
Common mistakes
  • A (16): forgot the starting amount: = 16
  • B (28): added the factor once for each hour instead of multiplying: 20 + 2 × 4 = 28
  • C (160): multiplied the start by the factor and by the number of hours instead of using an exponent: 20 × 2 × 4 = 160

Growth patterns

Method. Term n = first term × rati.

Worked example
The pattern 1, 2, 4, 8, … continues by multiplying by the same number each time. What is term 8?
A14
B24
C128
D256
AnswerC — 128
Step-by-step
  1. Each term is 2 times the one before.
  2. Term 8 is the first term multiplied by 2 a total of 7 times: 1 × = 1 × 128 = 128.
Quick checkcontinuing the list gives 1, 2, 4, 8, 16, 32, 64, 128; term 8 is 128 ✓.
Common mistakes
  • A (14): multiplied instead of using an exponent
  • B (24): continued with the last difference (linear pattern)
  • D (256): used the term number as the exponent

Evaluating exponential functions

Method. Raise the base to the power first, then multiply by the coefficient.

Worked example
If f(x) = 3 · 5ˣ, what is f(4)?
A
B60
C1875
D50625
AnswerC — 1875
Step-by-step
  1. Substitute x = 4: f(4) = 3 × .
  2. First the power: = 625.
  3. Then multiply: 3 × 625 = 1875.
Quick checkf(4) ÷ f(3) = 5, the base ✓.
Common mistakes
  • A (): used the wrong sign for the exponent
  • B (60): multiplied by the exponent instead of raising to a power
  • D (50625): multiplied 3 and 5 before raising to the power

Growth and decay rates

Method. Factor b = 1 + r for growth, 1 − r for decay; rate = distance of b from 1.

Worked example
The function f(t) = 500 · (1.2)ᵗ models a quantity t years from now. Which describes the change?
Adecay of 20% per year
Bgrowth of 20% per year
Cgrowth of 120% per year
Ddecay of 120% per year
AnswerB — growth of 20% per year
Step-by-step
  1. In f(t) = a · bᵗ, b > 1 means growth and 0 < b < 1 means decay.
  2. Here b = 1.2 is greater than 1.
  3. The rate is |b − 1| = |1.2 − 1| = 0.2 = 20%.
  4. So it is growth of 20% per year.
Quick check1.2 = 1 + 0.2, so each year the amount is multiplied by 1 + 0.2 ✓.
Common mistakes
  • A (decay of 20% per year): confused growth with decay
  • C (growth of 120% per year): used the factor itself as the percent
  • D (decay of 120% per year): used the factor as the percent and the wrong direction

Percent growth and decay

Method. Multiply by (1 ± r) once per year — never add r·t.

Worked example
A painting is worth $500 and its value increases by 10% each year. What will it be worth after 3 years?
A$550
B$650
C$665.50
D$732.05
AnswerC — $665.50
Step-by-step
  1. Each year the value is multiplied by 1 + 0.1 = 1.1.
  2. After 3 years: $500 × = $500 × 1.331 = $665.50.
Quick checkyear by year $500 → $550 → $605 → $665.50 ✓.
Common mistakes
  • A ($550): applied the change only once
  • B ($650): used simple (linear) change instead of compounding
  • D ($732.05): applied the change one time too many

Compound interest

Method. Rate per period = ; number of periods = n·t.

Worked example
$2,000 is invested at an annual interest rate of 5% compounded quarterly. Which expression gives the value of the investment after t years?
A2,000
B2,000ᵗ
C2,000
D2,000
AnswerD — 2,000
Step-by-step
  1. Compound interest: A = P with P = 2000, r = 0.05 and n = 4 periods per year.
  2. Each period the rate is , and there are 4t periods in t years.
  3. So A = 2,000.
Quick checkafter 1 year (t = 1) the money has grown 4 times by the factor 1 + ✓.
Common mistakes
  • A (2,000): did not divide the rate by the number of periods
  • B (2,000ᵗ): did not multiply the time by the number of periods
  • C (2,000): multiplied the rate and divided the time

Doubling and half-life

Method. Count the periods (time ÷ period length), then multiply by 2 or that many times.

Worked example
An investment of $500 doubles every 2 years. What will it be worth after 10 years, in dollars?
A8000
B16000
C32000
D512000
AnswerB — 16000
Step-by-step
  1. The number of doubling periods is 10 ÷ 2 = 5.
  2. Value = 500 × = 500 × 32 = 16000.
Quick check500 → 1000 → 2000 → 4000 → 8000 → 16000 over 5 periods ✓.
Common mistakes
  • A (8000): counted one period too few
  • C (32000): counted one period too many
  • D (512000): used 10 instead of as the exponent

Linear versus exponential models

Method. Constant difference → linear; constant ratio → exponential.

Worked example
A function has the values x: 0, 1, 2, 3 and y: 2, 6, 18, 54. Which describes the function?
AExponential, y = 2 · 3ˣ
BLinear, y = 2 + 4x
CExponential, y = 3 · 2ˣ
DLinear, y = 2 + 3x
AnswerA — Exponential, y = 2 · 3ˣ
Step-by-step
  1. Differences in y: 4, 12, 36.
  2. Ratios: 3, 3, 3.
  3. The ratios are constant (3).
  4. So the function is exponential with starting value 2: y = 2 · 3ˣ.
Quick checkthe model gives 2, 6, 18, 54 for x = 0, 1, 2, 3 ✓.
Common mistakes
  • B (Linear, y = 2 + 4x): used only the first difference
  • C (Exponential, y = 3 · 2ˣ): swapped the starting value and the ratio
  • D (Linear, y = 2 + 3x): treated the constant ratio as a constant difference

Exponential graphs

Method. Starting value = y at x = 0; base = (y at x = 1) ÷ (y at x = 0).

Worked example
The graph of an exponential function passes through the two marked points. Which equation defines the function?
Figure for the worked example
Af(x) = 6 · ˣ
Bf(x) = 6 · 3ˣ
Cf(x) = −4x + 6
Df(x) = 2 · ˣ
AnswerA — f(x) = 6 · ˣ
Step-by-step
  1. The marked points are (0, 6) and (1, 2).
  2. For f(x) = a · bˣ, f(0) = a = 6.
  3. Then f(1) = a · b.
  4. So b = 2 ÷ 6 = .
  5. So f(x) = 6 · ˣ.
Quick checkf(0) = 6 and f(1) = 6 × = 2, the two marked points ✓.
Common mistakes
  • B (f(x) = 6 · 3ˣ): inverted the base (growth versus decay)
  • C (f(x) = −4x + 6): fitted a line through the two marked points
  • D (f(x) = 2 · ˣ): used the value at x = 1 as the starting value

Changing time units

Method. Per-quarter factor = (yearly factor)^.

Worked example
A quantity is modeled by Q(t) = 500 · 2ᵗ, where t is in years. By what factor does the quantity grow each quarter?
A
B
C1 +
D
AnswerA —
Step-by-step
  1. Let m be the quarterly growth factor.
  2. There are 4 quarters in a year.
  3. So = 2.
  4. So m = , and Q can be written 500 · .
Quick check = 2, the yearly factor ✓.
Common mistakes
  • B (): divided the yearly factor by 4
  • C (1 + ): divided the yearly rate by 4
  • D (): raised the factor to the power 4

Function Concepts

A function gives exactly one output for each input. Evaluate by substitution, solve f(x) = k, and read domain, range, intercepts and maximum or minimum values from a graph or table.

Key formulas
Evaluate
Solve f(x) = k
x-intercept
y-intercept
Vertical line test

Function notation — evaluating

Method. Put negative inputs in parentheses; square before multiplying by the coefficient.

Worked example
If f(x) = − 4x − 2, what is f(−2)?
A−6
B2
C10
D14
AnswerC — 10
Step-by-step
  1. Substitute x = −2 with parentheses: f(−2) = − 4(−2) − 2.
  2. Square first: = 4.
  3. Then 4 + 8 − 2 = 10.
Quick check = 4 (a square is never negative), so f(−2) = 4 + 8 − 2 ✓.
Common mistakes
  • A (−6): evaluated f(2) instead of f(−2)
  • B (2): squared −2 as −4
  • D (14): made a sign error with the constant

Domain

Method. Square roots: inside ≥ 0. Fractions: denominator ≠ 0.

Worked example
What is the domain of f(x) = ?
Aall real numbers except 7
Ball real numbers except −7
Cx > −7
Dall real numbers
AnswerB — all real numbers except −7
Step-by-step
  1. A fraction is undefined when its denominator is 0: x + 7 = 0 when x = −7.
  2. Every other real number is allowed.
Quick checkx = −7 makes the denominator 0 (not allowed), and x = −6 gives a real value ✓.
Common mistakes
  • A (all real numbers except 7): used the wrong sign for the excluded value
  • C (x > −7): treated the denominator like a square root
  • D (all real numbers): forgot that the denominator cannot be 0

Range

Method. Range of a parabola = from the vertex y-value upward (a > 0) or downward (a < 0).

Worked example
What is the range of f(x) = −3 + 7?
Ay ≥ 7
By ≤ 4
Cy ≤ −7
Dy ≤ 7
AnswerD — y ≤ 7
Step-by-step
  1. The vertex form a + k has vertex (4, 7).
  2. Since a = −3 is negative, the parabola opens down.
  3. So 7 is the greatest value.
  4. The range is y ≤ 7.
Quick check ≥ 0, so −3 times it is ≤ 0 and f(x) ≤ 7 ✓.
Common mistakes
  • A (y ≥ 7): reversed the direction of the parabola
  • B (y ≤ 4): used the x-coordinate of the vertex
  • C (y ≤ −7): used the wrong sign for the vertical shift

Piecewise functions

Method. First pick the piece whose condition the input satisfies (watch < versus ≤ at the boundary).

Worked example
The function f is defined by f(x) = −3x + 1 for x ≤ 4, and f(x) = 3 + 2 for x > 4. What is f(0)?
A−1
B1
C2
D3
AnswerB — 1
Step-by-step
  1. Decide which piece applies: x = 0 satisfies x ≤ 4.
  2. So use f(x) = −3x + 1.
  3. Substitute: f(0) = −3(0) + 1 = 1.
Quick checkthe other piece would give 2, but 0 does not satisfy its condition ✓.
Common mistakes
  • A (−1): made a sign error
  • C (2): used the wrong piece
  • D (3): added the two pieces

Reading key features from graphs

Method. Inputs are read on the x-axis, outputs on the y-axis.

Worked example
The graph of y = f(x) is shown. What is f(4)?
Figure for the worked example
A−5
B2
C4
D5
AnswerA — −5
Step-by-step
  1. f(4) is the y-coordinate of the point on the graph above (or below) x = 4.
  2. Move along the x-axis to 4.
  3. Then up or down to the graph: the point is (4, −5).
  4. So f(4) = −5.
Quick checkthe graph passes through (4, −5); the input is 4 and the output is −5 ✓.
Common mistakes
  • B (2): read the graph at x = 5
  • C (4): gave the input instead of the output
  • D (5): misread the sign of the y-value

Absolute Value

Absolute value is distance from 0. Split |expression| = k into two equations; check that k is not negative.

Key formulas
Equation
Negative right side
Two absolute values
Vertex of y = a|x − h| + k

Graphs of absolute-value functions — vertex

Method. Vertex = (value that makes the inside 0, the constant added outside).

Worked example
What is the vertex of the graph of y = −2|x + 2| − 2?
A(2, −2)
B(−2, 2)
C(2, 2)
D(−2, −2)
AnswerD — (−2, −2)
Step-by-step
  1. y = a|x − h| + k has vertex (h, k).
  2. Here the inside is zero at x = −2, and then y = −2.
  3. Vertex: (−2, −2).
Quick checkat x = −2, the absolute value is 0, so y = 0 − 2 = −2.
Common mistakes
  • A ((2, −2)): used the sign inside the bars as the x-coordinate
  • B ((−2, 2)): used the wrong sign for the vertical shift
  • C ((2, 2)): reversed both shifts

Graphs of absolute-value functions — equation

Method. Read the vertex for h and k; the slope of the right-hand side gives a (negative if the V opens down).

Worked example
Which equation is shown in the graph? (The vertex is marked.)
Figure for the worked example
Ay = −2|x − 3| − 3
By = −2|x + 3| + 3
Cy = −2|x + 3| − 3
Dy = 2|x + 3| − 3
AnswerC — y = −2|x + 3| − 3
Step-by-step
  1. The vertex is at (−3, −3).
  2. So the equation has the form y = a|x + 3| − 3.
  3. The graph opens down, and moving 1 unit right from the vertex changes y by −2.
  4. So a = −2.
  5. Equation: y = −2|x + 3| − 3.
Quick checkat x = −2 the equation gives y = −2(1) − 3 = −5, and the graph passes through (−2, −5) ✓.
Common mistakes
  • A (y = −2|x − 3| − 3): used the wrong sign for the horizontal shift
  • B (y = −2|x + 3| + 3): used the wrong sign for the vertical shift
  • D (y = 2|x + 3| − 3): missed whether the V opens up or down