PSAT/NMSQT · Math · Unit 03 Problem-Solving and Data AnalysisProblem-Solving and Data Analysis: Unit Study Guide
03.01 Ratios, Rates, Proportions and Units
Ratios, rates, proportional relationships and units are part of Problem-Solving and Data Analysis (about 20% of the PSAT/NMSQT Math section). Keep track of units, set up proportions, and convert rates step by step.
Ratios, Rates and Proportions
A ratio compares quantities; a proportion sets two ratios equal and is solved by cross-multiplying. Unit rates divide by the second quantity.
Key formulas| Proportion | ba=dc⇒ad=bc |
| Unit rate | unit rate=number of unitsamount |
| Scale | actual=map×scale factor |
| Unit conversion | multiply by a factor equal to 1, e.g. 1 ft12 in |
| Square and cubic units | square the factor for area; cube it for volume |
| Direct variation | y=kx |
| Inverse variation | xy=k |
| Density | density=volumemass |
Proportional relationships — find a value
Method. Set up equal ratios: 2y = 945, so y = 45 × 2 ÷ 9 = 10.
Worked exampleThe quantity y is proportional to x. When x = 9, y = 45. What is y when x = 2?
AnswerB — 10
Step-by-step- Proportional means y = kx.
- Find k: k = y ÷ x = 45 ÷ 9 = 5.
- Then y = 5 × 2 = 10.
Quick check10 ÷ 2 = 5, the same constant as 45 ÷ 9.
Common mistakes- A (0.4): used x divided by y as the constant
- C (38): added the same amount to y as was added to x
- D (90): multiplied the first y-value by the new x-value
Proportional relationships — constant from a graph
Method. Read any labeled point (x, y) on the line and divide y by x.
Worked exampleThe graph shows a proportional relationship y = kx. What is the value of k?

AnswerB — 4
Step-by-step- The line passes through the origin and the point (5, 20).
- k = y ÷ x = 20 ÷ 5 = 4.
Quick check4 × 5 = 20, so the point (5, 20) fits y = 4x.
Common mistakes- A (41): divided x by y instead of y by x
- C (15): subtracted the coordinates
- D (20): gave the y-value of the point
Scale drawings and maps
Method. Map → real: multiply by the scale; real → map: divide by the scale.
Worked exampleOn a map, 1 cm represents 50 km. Two towns are 1.3 cm apart on the map. What is the actual distance between them, in km?
AnswerC — 65
Step-by-step- Each centimeter stands for 50 km.
- So multiply: 1.3 × 50 = 65 km.
Quick check65 ÷ 50 = 1.3 cm, the map distance.
Common mistakes- A (0.026): divided by the scale instead of multiplying
- B (51.3): added the scale to the map distance
- D (650): put an extra zero on the answer
Unit conversions with square and cubic units
Method. Square units use the factor squared (122=144); cubic units use it cubed (123=1,728).
Worked exampleHow many square inches are in 4 square feet?
AnswerC — 576
Step-by-step- One square foot is 12 × 12 = 144 square inches, because every dimension is converted.
- So 4 square feet = 4 × 144 = 576 square inches.
Quick check576 ÷ 144 = 4 square feet, the amount given.
Common mistakes- A (361): divided instead of multiplying
- B (48): multiplied by the length factor 12 only
- D (6,912): used the cubic factor instead of the square factor
Density
Method. Density = mass ÷ volume: 249.2 ÷ 28 = 8.9 in one Desmos line.
Worked exampleA block has a mass of 249.2 grams and a volume of 28 cubic centimeters. What is its density, in grams per cubic centimeter?
AnswerA — 8.9
Step-by-step- Density = mass ÷ volume.
- Density = 249.2 ÷ 28.
- So Density = 8.9 grams per cubic centimeter.
Quick check8.9 × 28 = 249.2 grams, the mass given.
Common mistakes- B (221.2): subtracted volume from mass
- C (277.2): added mass and volume
- D (6977.6): multiplied mass by volume
Speed — find the distance
Method. Rate = amount ÷ time (or mass ÷ volume); amount = rate × time. Convert minutes to hours first.
Worked exampleA bus drives at 68 miles per hour for 4 hours 15 minutes. How many miles does it travel?
AnswerD — 289
Step-by-step- 15 minutes = 6015 = 0.25 hour.
- So the time is 4.25 hours.
- Distance = speed × time = 68 × 4.25 = 289 miles.
Quick check289 ÷ 4.25 = 68 miles per hour.
Common mistakes- A (16): divided the speed by the time
- B (272): ignored the minutes
- C (282.2): treated 4 hours 15 minutes as 4.15 hours
Direct variation
Method. y changes by the same factor as x: 6 ÷ 2 = 3, so y = 2 × 3 = 6.
Worked exampley varies directly with x, and y = 2 when x = 2. What is y when x = 6?
AnswerC — 6
Step-by-step- Direct variation: y = kx.
- k = 2 ÷ 2 = 1.
- So y = 1 × 6 = 6.
Quick check6 ÷ 6 = 1, the same constant.
Common mistakes- A (32): used inverse variation instead of direct variation
- B (1): gave the constant of variation
- D (12): multiplied y by the new x without dividing by the old x
Inverse variation — work problems
Method. Multiply the given pair, then divide by the new value.
Worked exampleIt takes 2 workers 20 days to paint a building. Working at the same rate, how many days would it take 20 workers?
AnswerB — 2
Step-by-step- The number of workers and the number of days vary inversely, so workers × days stays the same.
- 2 × 20 = 40 worker-days.
- With 20 workers: 40 ÷ 20 = 2 days.
Quick check20 × 2 = 40 = 2 × 20.
Common mistakes- A (1): Divided the 20 days by the 20 new workers: 20 ÷ 20 = 1.
- C (40): Gave the total number of worker-days, 2 × 20 = 40, instead of the number of days.
- D (200): Used direct variation instead of inverse variation: 20 × 220 = 200.
Inverse variation
Method. Multiply the given pair, then divide by the new value.
Worked exampley varies inversely with x, and y = 9 when x = 5. What is y when x = 9?
AnswerA — 5
Step-by-step- Inverse variation: x × y stays constant.
- 5 × 9 = 45.
- So y = 45 ÷ 9 = 5.
Quick check9 × 5 = 45 = 5 × 9.
Common mistakes- B (13): added the change in x to y
- C (16.2): used direct variation instead of inverse variation
- D (45): gave the product xy (the constant) instead of y
Sharing in a ratio
Method. Add the ratio numbers, find one part, then multiply.
Worked example$56 is shared among three friends in the ratio 1:6:7. How much is the smallest share?
AnswerA — $4
Step-by-step- Total parts: 1 + 6 + 7 = 14.
- One part = $56 ÷ 14 = $4.
- The smallest share is 1 × $4 = $4.
Quick checkshares $4 + $24 + $28 = $56.
Common mistakes- B ($24): gave the middle share
- C ($28): gave the largest share
- D ($56): divided the total by the ratio number instead of by the total number of parts
Ratios — find the total
Method. Total = boys × (total parts ÷ boy parts) = 40 × 59 = 72.
Worked exampleThe ratio of boys to girls in a club is 5:4. There are 40 boys. How many students are in the club?
AnswerD — 72
Step-by-step- 5 parts are 40 boys.
- So one part is 40 ÷ 5 = 8.
- The club has 5 + 4 = 9 parts: 9 × 8 = 72 students.
Quick check40:32 simplifies to 5:4, and 40 + 32 = 72.
Common mistakes- A (32): found the number of girls only
- B (44): added the girls' ratio number to the number of boys
- C (49): added the ratio total to the number of boys
Multi-step rate problems
Method. Find the per-minute rate first, convert all time to minutes, then multiply.
Worked exampleA printer prints 20 pages every 2 minutes. At this rate, how many pages does it print in 3 hours 12 minutes?
AnswerB — 1,920
Step-by-step- Rate: 20 ÷ 2 = 10 pages per minute.
- Time: 3 × 60 + 12 = 192 minutes.
- Pages: 10 × 192 = 1,920.
Quick check1,920 ÷ 192 = 10 pages per minute = 20 pages per 2 minutes.
Common mistakes- A (1,800): ignored the extra minutes
- C (3,120): treated 3 hours as 300 minutes
- D (3,840): used 20 pages per minute instead of per 2 minutes
Dimensional analysis — rate conversions
Method. Multiply by conversion fractions so unwanted units cancel; check every unit is converted.
Worked exampleA tap drips 3 milliliters every minute. How many liters does it drip in a day? (1 liter = 1,000 milliliters)
AnswerC — 4.32
Step-by-step- 3 mL/min × 60 min/h × 24 h/day = 4,320 mL per day.
- ÷ 1,000 = 4.32 liters.
Quick check4.32 L = 4,320 mL, and 4,320 ÷ 1,440 minutes = 3 mL per minute.
Common mistakes- A (0.072): Multiplied by 24 hours but left out the 60 minutes in each hour: 3 × 24 ÷ 1,000 = 0.072.
- B (0.18): Found liters per hour, not per day: 3 × 60 ÷ 1,000 = 0.18.
- D (4,320): Did not convert milliliters to liters: 4,320.
Average speed for a round trip
Method. For equal distances, average speed = 2ab/(a + b) = 2 × 40 × 120 ÷ 160 = 60.
Worked exampleA driver travels 120 miles to a lake at 40 miles per hour and drives back the same way at 120 miles per hour. What is the average speed for the whole trip, in miles per hour?
AnswerB — 60
Step-by-step- Time out = 120 ÷ 40 = 3 h.
- Time back = 120 ÷ 120 = 1 h.
- Total distance 240 miles ÷ total time 4 h = 60 mph.
Quick check60 is closer to 40 than to 120, because more time is spent at the slower speed.
Common mistakes- A (30): used the one-way distance with the total time
- C (80): averaged the two speeds
- D (240): used only the time for the return trip
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Distance, rate and time
Method. Distance = rate × time; opposite directions or toward each other → add speeds, same direction → subtract.
Worked exampleSofia and Zoe are 42 miles apart and ride their bikes toward each other, Sofia at 6 miles per hour and Zoe at 8 miles per hour. After how many hours will they meet?
AnswerA — 3
Step-by-step- Moving toward each other, the gap closes at 6 + 8 = 14 miles per hour.
- Time = distance ÷ rate: 42 ÷ 14 = 3 hours.
Quick check6 × 3 + 8 × 3 = 18 + 24 = 42 ✓.
Common mistakes- B (5.25): used only Zoe's speed
- C (7): used only Sofia's speed
- D (21): subtracted the speeds instead of adding
Work problems
Method. Together time = (product)/(sum) of the two times.
Worked exampleAva can paint a fence in 20 hours. Dev can paint the same fence in 30 hours. Working together at these rates, how many hours will it take them to paint the fence?
AnswerB — 12
Step-by-step- Ava does 201 of the job per hour and Dev does 301.
- Together: 201 + 301 = 121 of the job per hour.
- Time = 1 ÷ (121) = 12 hours.
Quick checkin 12 hours Ava paints 53 and Dev paints 52 of the fence; 53 + 52 = 1 ✓.
Common mistakes- A (10): subtracted the two times
- C (25): averaged the two times
- D (50): added the two times
03.02 Percentages
Percentages appear in context: percent of a quantity, percent increase and decrease, finding an original amount, and successive percent changes. Always ask: percent of what?
Percents
Percent means per hundred. Convert to a decimal, then multiply; percent change compares the change with the original.
Key formulas| Percent of | p% of n=100pn |
| Percent change | oldnew−old×100% |
| Successive changes | n(1+r1)(1+r2) (r as a decimal, negative for a decrease) |
| Original amount | original=1+rnew |
| Percentage points | 10%→25%: up 15 percentage points, a 150% increase |
| Simple interest | I=Prt |
Percent increase and decrease
Method. New ÷ original = 1.5, so the change is 1.5 − 1 = +0.5 → 50%.
Worked exampleThe monthly rent changed from $260.00 to $390.00. What is the percent increase?
AnswerB — 50%
Step-by-step- Change = $390.00 − $260.00 = $130.00.
- Percent change = change ÷ original × 100 = 130 ÷ 260 × 100 = 50%.
Quick check$260.00 + 50% of $260.00 = $390.00.
Common mistakes- A (0.5%): did not multiply by 100
- C (130%): gave the amount of change as the percent
- D (150%): gave the new value as a percent of the original
Discounts and sale prices
Method. Pay 85% of the price: 0.85 × $245.00 = $208.25.
Worked exampleA backpack costs $245.00. It is on sale for 15% off. What is the sale price?
A$36.75
B$208.25
C$230.00
D$281.75
AnswerB — $208.25
Step-by-step- Discount = 15% of $245.00 = $36.75.
- Sale price = $245.00 − $36.75 = $208.25.
Quick check$245.00 − $208.25 = $36.75, which is 15% of $245.00.
Common mistakes- A ($36.75): gave the discount instead of the sale price
- C ($230.00): subtracted 15 dollars instead of 15%
- D ($281.75): added the discount instead of subtracting
Tax and tips
Method. Multiply by 1.2 (120%) in one step: 1.2 × $51.00 = $61.20.
Worked exampleA meal costs $51.00. A 20% tip is added. What is the total cost?
A$10.20
B$40.80
C$61.20
D$71.00
AnswerC — $61.20
Step-by-step- Tip = 20% of $51.00 = 0.2 × $51.00 = $10.20.
- Total = $51.00 + $10.20 = $61.20.
Quick check$61.20 − $51.00 = $10.20, which is 20% of $51.00.
Common mistakes- A ($10.20): gave the tip only, not the total
- B ($40.80): subtracted the tip instead of adding it
- D ($71.00): added 20 dollars instead of 20%
Simple interest
Method. One year's interest is $123.75; multiply by 7 years and add the principal.
Worked example$5,500 is invested at 2.25% simple interest per year for 7 years. What is the total amount in the account at the end?
A$123.75
B$866.25
C$6,366.25
D$86,625.00
AnswerC — $6,366.25
Step-by-step- Simple interest I = P × r × t = $5,500 × 0.0225 × 7 = $866.25.
- Total = $5,500 + $866.25 = $6,366.25.
Quick check$866.25 ÷ 7 = $123.75 per year, which is 2.25% of $5,500.
Common mistakes- A ($123.75): found the interest for one year only
- B ($866.25): gave the interest only, not the total
- D ($86,625.00): used the percent without dividing by 100
Markup
Method. Multiply the cost by 1.75: $603.75.
Worked exampleA store buys a toy for $345.00 and marks the price up by 75%. What is the selling price?
A$86.25
B$258.75
C$420.00
D$603.75
AnswerD — $603.75
Step-by-step- Markup = 75% of $345.00 = $258.75.
- Selling price = $345.00 + $258.75 = $603.75.
Quick check($603.75 − $345.00) ÷ $345.00 = 0.75 = 75%.
Common mistakes- A ($86.25): subtracted the markup instead of adding it
- B ($258.75): gave the markup only, not the selling price
- C ($420.00): added 75 dollars instead of 75%
Repeated percent growth
Method. 1,600 × 1.53 = 1,600 × 3.375 = 5,400.
Worked exampleA town has 1,600 people. The population grows by 50% each year. What will the population be after 3 years?
AnswerD — 5,400
Step-by-step- Each year multiply by 1.5: 1,600 → 2,400 → 3,600 → 5,400.
- After 3 years: 5,400.
Quick checkthe growth in year 3 (1,800) is larger than in year 1 (800), as expected for percent growth.
Common mistakes- A (2,400): applied the growth for one year only
- B (3,800): gave only the increase
- C (4,000): added the same amount each year (simple growth)
Reverse percent — find the original
Method. Divide by the multiplier (1.1); do not take 10% of the new amount.
Worked exampleAfter a 10% increase, a monthly bill is $105.60. What was the bill before the increase?
A$10.56
B$95.04
C$95.60
D$96.00
AnswerD — $96.00
Step-by-step- The new amount is 110% of the original.
- So original = $105.60 ÷ 1.1 = $96.00.
Quick check$96.00 + 10% of $96.00 = $105.60.
Common mistakes- A ($10.56): gave the percent of the new price
- B ($95.04): subtracted 10% of the new price
- C ($95.60): subtracted 10 dollars
Successive percent changes
Method. Multiply the multipliers: 1.1 × 0.7 = 0.77, then × $170.00 = $130.90.
Worked exampleA price of $170.00 is increased by 10%, and then the new price is decreased by 30%. What is the final price?
A$13.09
B$56.10
C$119.00
D$130.90
AnswerD — $130.90
Step-by-step- Increase: $170.00 × 1.1 = $187.00.
- Decrease that by 30%: $187.00 × 0.7 = $130.90.
Quick checkthe second change is taken from $187.00, not from $170.00, so the result is not $136.00.
Common mistakes- A ($13.09): moved the decimal point one place too far left
- B ($56.10): gave the amount of the second change instead of the final price
- C ($119.00): applied only the decrease
Percentage points versus percent change
Method. Percentage points = simple difference of the rates; percent change = that difference ÷ the original rate × 100.
Worked exampleA bank's interest rate rose from 10% to 25%. By what percent did the rate increase?
AnswerD — 150%
Step-by-step- The rate changed by 15 percentage points.
- Percent change = 15 ÷ 10 × 100 = 150%.
Quick check150% of 10% is 15 percentage points.
Common mistakes- A (15%): gave the change in percentage points, not the percent change
- B (35%): added the two rates
- C (60%): divided by the new rate instead of the original
Mixtures — percent concentration
Method. Weighted average: (amount₁ × percent₁ + amount₂ × percent₂) ÷ total amount.
Worked example70 liters of a 35% salt solution are mixed with 10 liters of a 45% salt solution. What is the percent of salt in the mixture?
AnswerB — 36.25%
Step-by-step- Salt: 0.35 × 70 + 0.45 × 10 = 24.5 + 4.5 = 29 liters, in 80 liters.
- Percent = 29 ÷ 80 × 100 = 36.25%.
Quick check36.25% lies between 35% and 45%, closer to the percent of the larger amount.
Common mistakes- A (29%): found the amount of salt but did not divide by the total volume
- C (40%): averaged the two percents without weighting
- D (80%): added the two percents
03.03 One-Variable Data
One-variable data questions use dot plots, histograms, box plots and tables. Find and compare the mean, median, range and spread, and judge how an outlier or a change in the data affects them.
Center and Spread
Mean, median and mode describe the center; range, IQR and standard deviation describe the spread.
Key formulas| Mean | xˉ=n∑x |
| Median | middle value of the ordered data (even n: mean of the two middle values) |
| Range | max−min |
| IQR | Q3−Q1 |
| Missing value from a mean | sum=mean×n |
| Weighted mean | xˉ=w1+w2+⋯w1x1+w2x2+⋯ |
Median
Method. Sort first; odd count → middle value, even count → mean of the two middle values.
Worked exampleWhat is the median of the data set 74, 76, 49, 88, 20, 59, 69, 22?
AnswerD — 64
Step-by-step- Order the values.
- So 20, 22, 49, 59, 69, 74, 76, 88.
- There are 8 values.
- The two middle values are 59 and 69, and their mean is (59 + 69) ÷ 2 = 64.
- So the median is 64.
Quick check4 values lie on each side of 64 in the ordered list ✓.
Common mistakes- A (4.5): gave the middle position instead of the value
- B (54): did not put the values in order first
- C (57.125): gave the mean
Interquartile range
Method. IQR = median of the upper half − median of the lower half.
Worked exampleWhat is the interquartile range (IQR) of 86, 45, 17, 95, 79, 70, 12, 22, 98, 55, 84, 80?
AnswerB — 51.5
Step-by-step- Order the values.
- So 12, 17, 22, 45, 55, 70, 79, 80, 84, 86, 95, 98.
- The lower half is 12, 17, 22, 45, 55, 70.
- So Q1 = 33.5.
- The upper half is 79, 80, 84, 86, 95, 98.
- So Q3 = 85.
- Then IQR = Q3 − Q1 = 85 − 33.5 = 51.5.
Quick check33.5 + 51.5 = 85, the upper quartile ✓.
Common mistakes- A (10.5): used the median instead of Q1
- C (85): gave Q3 only
- D (86): gave the range
Effect of outliers
Method. Find both means, then subtract; an outlier pulls the mean toward it.
Worked exampleThe data set 89, 20, 22, 24, 10 has an outlier. By how much does the mean decrease when the outlier is removed?
AnswerC — 14
Step-by-step- The mean with every value is 165 ÷ 5 = 33.
- The outlier is 89.
- Without it, the mean is 76 ÷ 4 = 19.
- The decrease is 33 − 19 = 14.
Quick check19 + 14 = 33, the original mean ✓.
Common mistakes- A (1): found the change in the median
- B (11.2): used the original mean for the outlier's distance
- D (17.8): divided the outlier by the count
Comparing data sets
Method. Find the median of each set separately, then subtract.
Worked exampleData set A is 74, 17, 87, 56, 68, 12, 99. Data set B is 18, 10, 95, 97, 39, 11, 31. How much greater is the median of A than the median of B?
AnswerB — 37
Step-by-step- Ordered, A is 12, 17, 56, 68, 74, 87, 99.
- So its median is 68.
- Ordered, B is 10, 11, 18, 31, 39, 95, 97.
- So its median is 31.
- The difference is 68 − 31 = 37.
Quick check31 + 37 = 68, the median of A ✓.
Common mistakes- A (16): compared the means instead
- C (99): added the medians
- D (112): compared the sums
Weighted mean
Method. Weighted mean = Σ(weight × score) with weights as decimals.
Worked exampleA grade is 50% final exam, 25% projects and 25% classwork. A student scores 69, 71 and 90 in these parts. What is the student's grade?
AnswerB — 74.75
Step-by-step- Multiply each score by its weight.
- So 50% × 69 + 25% × 71 + 25% × 90.
- That is 34.5 + 17.75 + 22.5 = 74.75.
Quick check74.75 lies between the lowest score 69 and the highest score 90 ✓.
Common mistakes- A (69): used only the score with the largest weight
- C (80): matched the weights to the wrong scores
- D (7475): did not divide by 100
Standard deviation (concept)
Method. Look for values bunched far from the center on both sides, not just one extreme value.
Worked exampleSet P = {4, 4, 4, 5, 5, 19}, Set Q = {2, 2, 2, 16, 16, 16}, Set R = {19, 20, 21, 23, 24, 25} and Set S = {10, 10, 11, 11, 12, 12}. Which set has the greatest standard deviation?
AnswerB — Set Q
Step-by-step- Standard deviation measures how far values typically are from the mean.
- In Set Q, the values sit farthest from their mean overall (SD ≈ 7.00).
- The other sets have smaller SDs: Set P ≈ 5.46, Set R ≈ 2.16, Set S ≈ 0.82.
- So the answer is Set Q.
Quick checka large range alone does not make a large SD; Set P has the greatest range but a smaller SD ✓.
Common mistakes- A (Set P): chose the set with the greatest range
- C (Set R): chose the set with the greatest mean
- D (Set S): chose the set with the least spread
Distributions
Describe a distribution by its shape, center and spread. A histogram or dot plot shows shape; a box plot shows the five-number summary. Standard deviation measures how far values typically lie from the mean.
Key formulas| Five-number summary | min, Q1, median, Q3, max |
| IQR | Q3−Q1 |
| Skew | right skew: mean usually greater than median |
| Standard deviation | more spread from the mean⇒larger SD |
Box plots
Method. IQR = length of the box, from Q1 to Q3.
Worked exampleThe box plot shows test scores. What is the interquartile range?

AnswerC — 15
Step-by-step- The box runs from Q1 = 35 to Q3 = 50.
- The IQR is Q3 − Q1 = 50 − 35 = 15.
Quick check35 + 15 = 50, the right edge of the box ✓.
Common mistakes- A (5): used the median instead of Q3
- B (10): used the median instead of Q1
- D (80): found the range
Five-number summary
Method. Sort, split into lower and upper halves, then take the median of each half.
Worked exampleWhat is the first quartile (Q1) of 34, 90, 33, 48, 61, 74, 88, 84, 2, 71?
AnswerB — 34
Step-by-step- Order the values.
- So 2, 33, 34, 48, 61, 71, 74, 84, 88, 90.
- The lower half is 2, 33, 34, 48, 61.
- Its median is Q1 = 34.
Quick checkQ1 = 34 is below the median 66 ✓.
Common mistakes- A (33): took the second value
- C (66): gave the median
- D (84): gave Q3 instead
Shape of a distribution
Method. Equal bar heights → uniform; one long tail → skewed toward the tail; one central peak with matching sides → mound-shaped symmetric.
Worked exampleThe histogram shows the distribution of package weights. Which best describes its shape?

Auniform
Bskewed right
Csymmetric with a single peak in the middle
Dskewed left
AnswerA — uniform
Step-by-step- All the bars have the same height, 15.
- No interval holds more data than another, so there is no peak and no tail.
- So the shape is uniform.
Quick checkevery bar has a frequency of 15, so no interval stands out ✓.
Common mistakes- B (skewed right): saw a tail on the right that is not there
- C (symmetric with a single peak in the middle): thought there is a peak in the middle
- D (skewed left): saw a tail on the left that is not there
Comparing distributions
Method. Read the same feature from both plots, then subtract.
Worked exampleThe box plots compare two groups. How much greater is the median of Class A than the median of Class B?

AnswerA — 2
Step-by-step- The median of Class A is 17 and the median of Class B is 15.
- The difference is 17 − 15 = 2.
Quick checkthe answer uses the median line of each plot only ✓.
Common mistakes- B (3): compared the Q1 values
- C (4): compared the Q3 values
- D (32): added the medians
Histograms
Method. Find the middle position, then add bar heights from the left until you pass it.
Worked exampleThe histogram shows test scores for 33 students. Each bar includes its left edge but not its right edge. Which interval contains the median?

A35 to 40
B25 to 30
C30 to 35
D40 to 45
AnswerA — 35 to 40
Step-by-step- With 33 values, the median is value number 17.
- The running totals of the bars are 1, 13, 16, 27, 33.
- The total first reaches 17 in the bar from 35 to 40.
Quick checkfewer than 17 values lie below 35 and at least 17 lie below 40 ✓.
Common mistakes- B (25 to 30): chose the tallest bar
- C (30 to 35): chose the middle interval on the scale
- D (40 to 45): miscounted the position of the middle value by a bar
Graphs and Tables
Read the title, axes and scale before reading values. Bar graphs compare categories, line graphs show change over time, and two-way tables count data by two categories.
Key formulas| Percent of whole | totalpart×100% |
| Change on a line graph | rate of change=change in xchange in y |
| Two-way table totals | row totals and column totals each add to the grand total |
Bar graphs
Method. Percent change = (new − old) ÷ old × 100; always divide by the earlier year.
Worked exampleThe bar graph shows concert tickets sold each year. What was the percent increase from 2019 to 2023?

AnswerB — 25%
Step-by-step- Read the graph.
- So 2019 = 100 and 2023 = 125.
- The change is 25.
- Percent increase = change ÷ original × 100 = 25 ÷ 100 × 100 = 25%.
Quick check100 + 25% of 100 = 100 + 25 = 125 ✓.
Common mistakes- A (20%): divided by the new value instead of the original
- C (80%): gave the original value as a percent of the new value
- D (125%): gave the new value as a percent of the original
Word Problems
Name the unknown, translate the words into an equation or inequality, solve, and answer the question that was asked, with units.
Key formulas| Distance | d=rt |
| Work (combined rate) | t11+t21=T1 |
| Mixture | c1v1+c2v2=c(v1+v2) |
| Consecutive integers | n, n+1, n+2;consecutive even or odd: n, n+2, n+4 |
| Linear model | total=starting amount+rate×number of units |
| At most / at least | at most⇒ ≤;at least⇒ ≥ |
| Mean | xˉ=nsum |
Averages
Method. New score = new average + (number of old tests) × (rise in average) = 85 + 3 × 3.
Worked exampleDev's average score on 3 tests is 82. What score does Dev need on the next test to raise the average to 85?
AnswerD — 94
Step-by-step- Current total: 3 × 82 = 246.
- Needed total for 4 tests: 4 × 85 = 340.
- Next score: 340 − 246 = 94.
Quick check(246 + 94) ÷ 4 = 340 ÷ 4 = 85 ✓.
Common mistakes- A (12): multiplied the gap by 4
- B (85): gave the target average
- C (88): averaged the old average and the new score only
03.04 Two-Variable Data
Two-variable data questions use scatterplots and models. Interpret the slope and intercept of a line of best fit, use it to predict, compare data with the model, and tell linear from exponential relationships.
Scatterplots and Lines of Fit
Describe the direction, form and strength of the association. A line of best fit predicts y from x; points close to the line show a strong linear association.
Key formulas| Line of best fit | y=mx+b gives the predicted value of y |
| Residual | actual y−predicted y |
| Slope of a line of fit | predicted change in y per 1-unit increase in x |
| y-intercept of a line of fit | predicted y when x=0 |
| Exponential model | y=abx: constant percent change |
Scatterplots and association
Method. Check direction (up/down), form (line/curve) and strength (how tight).
Worked exampleThe scatterplot shows drinks sold against temperature (°F). Which best describes the association?

Aa strong positive linear association
Ba strong negative linear association
Cno clear association
Da nonlinear (curved) association
AnswerB — a strong negative linear association
Step-by-step- The points fall from left to right and lie close to a straight line.
- So the plot shows a strong negative linear association.
Quick checkthe points fall from left to right and lie almost exactly on a straight line, which fits a strong negative linear association ✓.
Common mistakes- A (a strong positive linear association): read the direction backward
- C (no clear association): ignored the clear trend
- D (a nonlinear (curved) association): saw a curve that is not there
Interpreting a line of fit
Method. Change in ŷ = slope × change in x; the intercept does not matter.
Worked exampleA line of fit for the value y, in thousands of dollars, of a car that is x years old is ŷ = −5.5x + 57. By how much does the predicted value, in thousands of dollars, change when x increases by 9?
AnswerA — −49.5
Step-by-step- The slope −5.5 is the change in ŷ for each 1-unit increase in x.
- For an increase of 9, the change is −5.5 × 9 = −49.5.
Quick checkŷ at x = 0 is 57 and at x = 9 is 7.5, a change of −49.5 ✓.
Common mistakes- B (−5.5): gave the change for a 1-unit increase
- C (7.5): gave the predicted value at x = 9, 57 − 49.5 = 7.5, instead of the change
- D (57): gave the intercept
Linear and exponential models
Method. Constant differences → linear; constant ratios → exponential; constant second differences → quadratic.
Worked exampleWhich type of model fits the data in the table exactly?

Alinear
Bexponential
Cquadratic
Dnone of these
AnswerB — exponential
Step-by-step- Each y-value is 2 times the one before, a constant ratio.
- So an exponential model fits exactly.
Quick checkthe pattern holds for every consecutive pair in the table ✓.
Common mistakes- A (linear): looked only at the first difference
- C (quadratic): saw the differences change and stopped there
- D (none of these): missed the constant ratio
Graphs and Tables
Read the title, axes and scale before reading values. Bar graphs compare categories, line graphs show change over time, and two-way tables count data by two categories.
Key formulas| Percent of whole | totalpart×100% |
| Change on a line graph | rate of change=change in xchange in y |
| Two-way table totals | row totals and column totals each add to the grand total |
Line graphs
Method. Percent change = (new − old) ÷ old × 100; always divide by the earlier year.
Worked exampleThe line graph shows trees planted each year. What was the percent decrease from 2021 to 2023?

AnswerA — 50%
Step-by-step- Read the graph.
- So 2021 = 160 and 2023 = 80.
- The change is 80.
- Percent decrease = change ÷ original × 100 = 80 ÷ 160 × 100 = 50%.
Quick check160 − 50% of 160 = 160 − 80 = 80 ✓.
Common mistakes- B (80%): gave the change, not the percent change
- C (100%): divided by the new value instead of the original
- D (200%): gave the original value as a percent of the new value
03.05 Probability and Conditional Probability
Probability questions on the PSAT/NMSQT usually come from a two-way table or a short description. For a conditional probability, first restrict to the given row or column, then divide by that group's total.
Probability
Probability is the number of favorable outcomes divided by the total number of equally likely outcomes. Use the addition rule for “or”; multiply probabilities for “and” only when the events are independent. For a conditional probability, restrict to the given group first.
Key formulas| Basic | P(A)=totalfavorable |
| Complement | P(not A)=1−P(A) |
| Addition | P(A or B)=P(A)+P(B)−P(A and B) |
| Independent events | P(A and B)=P(A)P(B) |
| Conditional | P(A∣B)=P(B)P(A and B) |
| Two-way table | P(A∣B)=total number in Bnumber in both A and B |
| Expected count | expected count=n×P(A) |
Expected counts
Method. Expected count = probability × number of spins.
Worked exampleA spinner has 8 red, 6 yellow and 1 blue equal sections. It is spun 435 times. About how many times should it land on red?
AnswerD — 232
Step-by-step- P(red) = 158.
- Multiply by the number of spins.
- So 158 × 435 = 232.
Quick checkthe expected counts for all three colors add to 435 ✓.
Common mistakes- A (158): gave the probability, not the count
- B (145): treated the three colors as equally likely
- C (203): found the expected number of non-red results
Conditional probability and two-way tables
Method. “Or” → add the two groups and subtract the cell counted twice, or use 1 − P(neither).
Worked exampleThe table shows a survey of people. A person is chosen at random from everyone surveyed. What is the probability that the person is in the Adults row or the Prefers cats column (or both)?

A6415
B2048585
C3211
D6449
AnswerD — 6449
Step-by-step- Add P(Adults) and P(Prefers cats).
- Then subtract P(both) once.
- So 6445 + 6426 − 6422 = 6449.
Quick check1 − P(neither) = 1 − 6415 = 6449, where 15 is the Teens and Prefers dogs cell ✓.
Common mistakes- A (6415): found the probability of neither
- B (2048585): multiplied the separate probabilities
- C (3211): found the “and” probability
Graphs and Tables
Read the title, axes and scale before reading values. Bar graphs compare categories, line graphs show change over time, and two-way tables count data by two categories.
Key formulas| Percent of whole | totalpart×100% |
| Change on a line graph | rate of change=change in xchange in y |
| Two-way table totals | row totals and column totals each add to the grand total |
Two-way tables
Method. Given a row → divide by that row's total.
Worked exampleThe two-way table shows the results of a survey of customers. What percent of the customers in the Morning row are in the Tea column?

AnswerC — 65%
Step-by-step- The question is about the Morning row only.
- So divide by its total, 40.
- Then 26 ÷ 40 = 2013 = 65%.
Quick check65% of 40 is 26, the Morning and Tea cell ✓.
Common mistakes- A (35%): used the Coffee cell
- B (50%): found the percent of all customers in the Morning row
- D (80%): used the Evening row
03.06 Inference and Statistical Claims
This skill covers what can be concluded from data: estimating a population value from a random sample, using a margin of error, and telling observational studies from experiments with random assignment.
Data Collection
Random sampling lets a result generalize to the population that was sampled; random assignment in an experiment supports a cause-and-effect conclusion. A margin of error gives a range of plausible values for the population value.
Key formulas| Survey | random sample→generalize to population |
| Experiment | random assignment→cause and effect |
| Margin of error | estimate±MOE |
| Larger sample | larger random sample⇒smaller margin of error |
Inference from a random sample
Method. Estimate = sample proportion × population size.
Worked exampleA random sample of 200 voters is taken from 5000 voters in a district. Of the sample, 59 favor a new recycling plan. About how many of all 5000 voters favor a new recycling plan?
AnswerA — 1475
Step-by-step- In the sample, 20059 = 29.5% favor a new recycling plan.
- A random sample represents the population.
- So estimate 20059 × 5000 = 1475.
Quick check50001475 = 20059, the sample proportion ✓.
Common mistakes- B (1534): added the sample count to the estimate
- C (2950): treated the count as a percent
- D (3525): estimated the number who do not
Random sampling
Method. Random = chosen by chance from a list of everyone; not volunteers, not whoever is nearby.
Worked exampleA researcher wants a random sample of 30 members from all members of a gym. Which method gives a random sample?
AAsk the 30 members who happen to be nearest to the main entrance one morning.
BAsk 30 members chosen from the members of one club only.
CNumber every member on a complete list and use a random number generator to choose 30 of them.
DPost an online survey and use the first 30 members who choose to respond.
AnswerC — Number every member on a complete list and use a random number generator to choose 30 of them.
Step-by-step- In a random sample every member of the population has the same chance of being chosen.
- Only numbering everyone on a complete list and choosing by a random number generator does that.
- The other methods let people choose themselves, pick whoever is handy, or leave out part of the population.
Quick checkthe chosen method gives every member of the population an equal chance of selection ✓.
Common mistakes- A (Ask the 30 members who happen to be nearest to the main entrance one morning.): chose a convenience sample
- B (Ask 30 members chosen from the members of one club only.): chose a sample from only one part of the population
- D (Post an online survey and use the first 30 members who choose to respond.): chose a voluntary response sample
Margin of error
Method. Plausible values = estimate ± margin of error.
Worked exampleA poll reports that 45% of customers are satisfied, with a margin of error of ±5 percentage points. What is the greatest plausible value for the population percent?
AnswerC — 50%
Step-by-step- The plausible values are the sample percent ± the margin of error, from 45 − 5 = 40% to 45 + 5 = 50%.
- So the answer is 50%.
Quick checkthe interval is centered at 45% and has width 2 × 5 = 10 points ✓.
Common mistakes- A (40%): found the other end of the interval
- B (45%): gave the sample percent
- D (55%): doubled the margin of error
Scope of conclusions
Method. Random sampling → generalize; random assignment → cause and effect.
Worked exampleResearchers randomly select 200 adults from all adults in a town. For each adult, they record the exercise routine the adult already follows and the adult's resting heart rate. Adults who run regularly have lower resting heart rates, on average. Which conclusion is justified?
AThe result can be generalized to the population, but cause and effect cannot be concluded
BCause and effect can be concluded, and the result can be generalized to the population
CCause and effect can be concluded only for the subjects in the study
DNeither cause and effect nor generalization to the population is justified
AnswerA — The result can be generalized to the population, but cause and effect cannot be concluded
Step-by-step- Random sampling allows generalizing to the population.
- Random assignment allows cause-and-effect conclusions.
- Here the adults were selected at random, but they chose their own routines, so there is no random assignment.
- So: The result can be generalized to the population, but cause and effect cannot be concluded.
Quick checkrandom sampling is present and random assignment is not present, matching the chosen conclusion ✓.
Common mistakes- B (Cause and effect can be concluded, and the result can be generalized to the population): thought there was random assignment
- C (Cause and effect can be concluded only for the subjects in the study): missed the random sampling and thought there was random assignment
- D (Neither cause and effect nor generalization to the population is justified): missed the random sampling