SSAT Elementary Level · Quantitative · 03.01

Number Sense and Operations: Study Guide

The Elementary Level SSAT (grades 3–4) has one 30-question Quantitative section, 30 minutes, with five answer choices and no calculator. There is no penalty for a wrong answer, so answer every question. This topic covers number sense: place value and whole numbers on a number line, odd and even numbers, adding, subtracting, multiplying and dividing whole numbers, simple fractions, tenths and hundredths with money, factors, multiples and primes, word problems, input and output rules, and missing numbers in number sentences.

Whole Numbers, Place Value, Odd and Even

Each place in a whole number is worth 10 times the place to its right. On a number line, first find what one space is worth, then count the spaces. Odd and even numbers follow simple rules when you add, subtract or multiply.

Key formulas
Place value
Round to the nearest ten
Number line
Even and odd
Add or subtract
Multiply
Order does not matter
Fact family

Whole numbers on a number line

Method. Find the value of one space (2), then multiply by the number of spaces to P (8).

Worked example
On the number line, what number does point P show?
Figure for the worked example
A4
B8
C10
D16
E18
AnswerD — 16
Step-by-step
  1. From 0 to 20 there are 10 equal spaces.
  2. So each space is 20 ÷ 10 = 2.
  3. P is 8 spaces from 0: 8 × 2 = 16.
Quick checkP is 2 spaces before 20: 20 − 4 = 16.
Common mistakes
  • A (4): counted the spaces back from the right end
  • B (8): counted the tick marks without using the scale
  • C (10): added instead of multiplying: 8 + 2 = 10
  • E (18): counted tick marks (including the one at 0) instead of spaces

Odd and even — parity rules

Method. Test with small numbers: a = 2, b = 1 gives a × b = 2, which is even; check one more pair to be sure.

Worked example
If a is an even whole number and b is an odd whole number, which expression must be even?
Ab × b
Ba + b
Ca + 1
Da × b
Eb + 2
AnswerD — a × b
Step-by-step
  1. Use the rules: even ± even = even, odd ± odd = even, odd ± even = odd.
  2. Even × anything = even, odd × odd = odd.
  3. Here a is even and b is odd.
  4. So a × b is always even.
Quick checkWith a = 4 and b = 3: a × b = 12, also even.
Common mistakes
  • A (b × b): chose an expression that is always odd
  • B (a + b): chose an expression that is always odd
  • C (a + 1): chose an expression that is always odd
  • E (b + 2): chose an expression that is always odd

Fractions

A fraction names equal parts of a whole: the bottom number tells how many equal parts the whole has, and the top number tells how many parts are taken. Multiply or divide the top and bottom by the same number to get an equal fraction. When the bottom numbers are the same, add or subtract only the top numbers.

Key formulas
Parts of a fraction
Equivalent fractions
Simplest form
One whole
Same bottom number
Compare: same bottom
Compare: same top
Mixed number
Fraction of a number
Whole number times a fraction

Fraction models — bar

Method. Top number = shaded parts (1); bottom number = all equal parts (4).

Worked example
What fraction of the bar is shaded?
Figure for the worked example
A
B
C
D1
E4
AnswerA —
Step-by-step
  1. The bar is cut into 4 equal parts and 1 of them is shaded.
  2. A fraction is shaded parts over all equal parts.
  3. So the shaded fraction is .
Quick checkShaded plus unshaded must make one whole: + = = 1.
Common mistakes
  • B (): compared shaded parts to unshaded parts
  • C (): named the unshaded part
  • D (1): gave only the number of shaded parts
  • E (4): flipped the fraction (total parts over shaded parts)

Fraction models — circle

Method. Top number = shaded parts (4); bottom number = all equal parts (7).

Worked example
What fraction of the circle is shaded?
Figure for the worked example
A
B
C
D
E
AnswerB —
Step-by-step
  1. The circle is cut into 7 equal parts and 4 of them are shaded.
  2. A fraction is shaded parts over all equal parts.
  3. So the shaded fraction is .
Quick checkShaded plus unshaded must make one whole: + = = 1.
Common mistakes
  • A (): named the unshaded part
  • C (): compared unshaded parts to shaded parts
  • D (): compared shaded parts to unshaded parts
  • E (): flipped the fraction (total parts over shaded parts)

Fractions on a number line

Method. Count the spaces between 0 and 1 for the bottom number (3), then count spaces from 0 to P for the top number (1).

Worked example
On the number line, what fraction does point P show?
Figure for the worked example
A
B
C
D
E3
AnswerB —
Step-by-step
  1. The distance from 0 to 1 is cut into 3 equal spaces.
  2. So each space is .
  3. Point P is 1 space to the right of 0.
  4. So P shows .
Quick checkP is 2 spaces short of 1, and + = 1.
Common mistakes
  • A (): counted all the tick marks (including 0 and 1) for the bottom number:
  • C (): counted tick marks (including the one at 0) instead of spaces
  • D (): counted the spaces back from 1
  • E (3): flipped the fraction

Equivalent fractions — missing number

Method. Find what the known part was multiplied by, then multiply the other part by the same number.

Worked example
What number makes = ■/15 true?
A3
B7
C12
D14
E20
AnswerC — 12
Step-by-step
  1. The bottom changes from 5 to 15.
  2. So it was multiplied by 15 ÷ 5 = 3.
  3. Multiply the top by the same number: 4 × 3 = 12.
  4. So = .
Quick checkSimplify by dividing top and bottom by 3: you get back .
Common mistakes
  • A (3): wrote the multiplier instead of the new top
  • B (7): added the multiplier to the top
  • D (14): added the same amount to the top as to the bottom
  • E (20): multiplied the top by the old bottom: 4 × 5 = 20

Equivalent fractions — choose

Method. Cross-multiply to test a choice: 3 × 8 = 24 and 4 × 6 = 24; equal products mean equal fractions.

Worked example
Which fraction is equivalent to ?
A
B
C
D
E
AnswerB —
Step-by-step
  1. Equivalent fractions come from multiplying the top and the bottom by the same number.
  2. 3 × 2 = 6 and 4 × 2 = 8.
  3. So = .
Quick checkDivide by 2 on top and bottom: .
Common mistakes
  • A (): multiplied only the bottom
  • C (): added the same number to the top and the bottom
  • D (): multiplied the top but added to the bottom
  • E (): multiplied only the top

Add — like denominators

Method. Same bottom → add only the tops: 1 + 2 = 3 over 7.

Worked example
What is + ?
A
B
C
D
E
AnswerE —
Step-by-step
  1. The bottom numbers are the same.
  2. So the parts are the same size (7ths).
  3. Add the top numbers and keep the bottom: 1 + 2 = 3.
  4. So .
Quick check − = , the first fraction.
Common mistakes
  • A (): multiplied the bottom numbers
  • B (): subtracted instead of adding
  • C (): added the bottom numbers too
  • D (): multiplied the top numbers instead of adding them: 1 × 2 = 2, so

Add — like denominators (word problem)

Method. Same-size parts: 2 + 3 = 5 parts of size .

Worked example
A jug had of a liter of juice. Lena poured in of a liter more. How much juice is in the jug now?
A
B
C
D
E
AnswerC —
Step-by-step
  1. Putting the two amounts together means add.
  2. Both amounts are in 8ths.
  3. So add the tops and keep the bottom: + = .
Quick checkThe total must be more than each amount: is greater than and .
Common mistakes
  • A (): subtracted instead of adding: − =
  • B (): added the bottom numbers too
  • D (): multiplied the top numbers
  • E (): flipped the answer (bottom over top)

Subtract — like denominators

Method. Same bottom → subtract only the tops: 3 − 1 = 2 over 5.

Worked example
What is − ?
A
B
C
D
E2
AnswerB —
Step-by-step
  1. The bottom numbers are the same.
  2. So subtract the top numbers and keep the bottom: 3 − 1 = 2.
  3. So .
Quick checkAdd back: + = .
Common mistakes
  • A (): multiplied the bottom numbers
  • C (): gave one whole minus the answer
  • D (): added instead of subtracting
  • E (2): subtracted the top numbers and left out the bottom number: 3 − 1 = 2

Fraction of a whole number

Method. Divide by the bottom, multiply by the top: 20 ÷ 5 × 1 = 4.

Worked example
What is of 20?
A4
B10
C16
D20
E24
AnswerA — 4
Step-by-step
  1. Find one part first: 20 ÷ 5 = 4.
  2. So of 20 is 4.
  3. Then take 1 of those parts: 1 × 4 = 4.
Quick check4 is less than 20 because is less than 1, and 4 × 5 = 1 × 20.
Common mistakes
  • B (10): found one half instead of one fifth: 20 ÷ 2 = 10
  • C (16): found the part that is left instead
  • D (20): multiplied by the top number only
  • E (24): added the part to the whole

Simplest form

Method. Divide top and bottom by any common factor, and keep going until no common factor is left (here → … → ).

Worked example
Write in simplest form.
A
B
C
D
E
AnswerD —
Step-by-step
  1. The greatest common factor of 4 and 6 is 2.
  2. Divide the top and the bottom by 2: 4 ÷ 2 = 2 and 6 ÷ 2 = 3.
  3. So = , and 2 and 3 share no factor other than 1.
Quick check2 × 2 = 4 and 3 × 2 = 6, so is equal to .
Common mistakes
  • A (): divided only the top
  • B (): subtracted the same amount from the top and the bottom
  • C (): subtracted 1 from the top and the bottom: 4 − 1 = 3 and 6 − 1 = 5
  • E (): flipped the fraction

Compare fractions

Method. Compare each fraction with and with 1 first; for close ones cross-multiply: > when a × d > b × c.

Worked example
Which fraction is the greatest?
A
B
C
D
E
AnswerC —
Step-by-step
  1. Rename each fraction with the common denominator 168: = , = , = , = , = .
  2. The greatest top number now shows the greatest fraction, .
Quick checkTurn into a decimal: about 0.750; it is the greatest of the decimals.
Common mistakes
  • A (): chose the least fraction instead of the greatest
  • B (): chose the fraction with the least bottom number
  • D (): chose the fraction with the greatest top number
  • E (): chose the fraction with the greatest bottom number

Multiply — fraction × whole number

Method. Write 4 as and multiply straight across: = = 2.

Worked example
What is 4 × ?
A
B2
C
D
E8
AnswerB — 2
Step-by-step
  1. 4 × means 4 groups of .
  2. Multiply the whole number by the top: 4 × 1 = 4.
  3. So the product is , which simplifies to 2.
Quick checkRepeated addition: + + + gives .
Common mistakes
  • A (): multiplied both the top and the bottom by the whole number
  • C (): added the whole number to the top
  • D (): added instead of multiplying: 4 + =
  • E (8): flipped the fraction before multiplying

Fraction of a whole number (word problem)

Method. Divide by the bottom, multiply by the top: 6 ÷ 3 × 1 = 2.

Worked example
A class has 6 students. of them ride the bus. How many students ride the bus?
A2
B4
C6
D8
E18
AnswerA — 2
Step-by-step
  1. Find one part first: 6 ÷ 3 = 2.
  2. So of 6 is 2.
  3. Then take 1 of those parts: 1 × 2 = 2.
Quick check2 is less than 6 because is less than 1, and 2 × 3 = 1 × 6.
Common mistakes
  • B (4): found the part that is left instead
  • C (6): multiplied by the top number only
  • D (8): added the part to the whole
  • E (18): multiplied by the bottom number instead of dividing: 6 × 3 = 18

Decimals and Money

The first place after the decimal point is tenths and the second is hundredths. Money uses hundredths: $3.25 means 3 dollars and 25 cents. Line up the decimal points to compare, add or subtract decimals.

Key formulas
Place value
Tenths and hundredths
Same value
Compare
Add or subtract
Money
Making change

Decimal place value — name the place

Method. Count 1 digit to the right of the decimal point: 5.

Worked example
In 397.51, which digit is in the tenths place?
A1
B3
C5
D7
E9
AnswerC — 5
Step-by-step
  1. Places to the right of the decimal point are tenths, hundredths, thousandths, …
  2. In 397.51, the tenths place is the first digit after the point, which is 5.
Quick checkThe tenths place is worth 0.1; 5 in that place is worth 0.5.
Common mistakes
  • A (1): used the place one to the right
  • B (3): used the hundreds place
  • D (7): used the ones place
  • E (9): used the tens place (left of the decimal point)

Decimals on a number line

Method. Find the size of one space (0.1), then count spaces from the left end.

Worked example
On the number line, what decimal does point P show?
Figure for the worked example
A3.07
B3.3
C3.7
D3.8
E4
AnswerC — 3.7
Step-by-step
  1. From 3 to 4 there are 10 equal spaces.
  2. So each space is (4 − 3) ÷ 10 = 0.1.
  3. P is 7 spaces past 3: 3 + 7 × 0.1 = 3.7.
Quick checkP is 3 spaces before 4: 4 − 3 × 0.1 = 3.7.
Common mistakes
  • A (3.07): read each space as one tenth of its size
  • B (3.3): counted the spaces back from the right end
  • D (3.8): counted tick marks (including the first one) instead of spaces
  • E (4): gave the number at the right end of the number line

Decimal place value — value of a digit

Method. Write 9, then put a zero in every place between it and the decimal point: 0.9.

Worked example
In 54.912, what is the value of the digit 9?
A0.009
B0.09
C0.9
D9
E90
AnswerC — 0.9
Step-by-step
  1. In 54.912 the digit 9 is 1 place to the right of the decimal point, which is the tenths place.
  2. Its value is 9 tenths = 0.9.
Quick check0.9 has its last digit in the tenths place, matching the position of 9 in 54.912.
Common mistakes
  • A (0.009): used the place two to the right
  • B (0.09): used the place one to the right
  • D (9): gave the digit itself, not its value
  • E (90): mixed up the tenths place with the tens place: 9 × 10 = 90

Compare decimals

Method. Line the decimals up at the decimal point and compare place by place from the left; extra digits do not make a decimal larger.

Worked example
Which decimal is the least?
A1.24
B1.251
C1.3
D1.42
E1.8
AnswerA — 1.24
Step-by-step
  1. Write every decimal with the same number of decimal places by adding zeros: 1.251 = 1.251, 1.8 = 1.800, 1.3 = 1.300, 1.24 = 1.240.
  2. Now compare digit by digit from the left.
  3. The least is 1.24.
Quick checkAnnex zeros so all have 3 decimal places and compare them as whole numbers of thousandths.
Common mistakes
  • B (1.251): chose the decimal with the most digits after the point
  • C (1.3): compared the digits after the point as whole numbers
  • D (1.42): swapped the tenths and hundredths digits of the least decimal (1.24 read as 1.42)
  • E (1.8): chose the greatest decimal instead of the least

Add decimals

Method. Add the whole parts (6 + 5 = 11) and the decimal parts (0.4 + 0.3 = 0.7), then combine: 11.7.

Worked example
What is 6.4 + 5.3?
A1.1
B1.17
C11.07
D11.7
E117
AnswerD — 11.7
Step-by-step
  1. Line up the decimal points: 6.4 + 5.3.
  2. Add place by place from the right, carrying as needed: 11.7.
Quick checkEstimate: about 6 + 5 = 11; 11.7 is close.
Common mistakes
  • A (1.1): subtracted instead of adding
  • B (1.17): put the decimal point one place too far left
  • C (11.07): wrote the tenths sum 7 in the hundredths place: 11 + 0.07 = 11.07
  • E (117): put the decimal point one place too far right

Decimals in money — making change

Method. Count up from $6.10: to the next dollar is $0.90, then $3 more to reach $10; total $3.90.

Worked example
Jake buys a lunch for $6.10 and pays with a $10 bill. How much change should Jake get?
A$3.90
B$4.00
C$4.10
D$4.90
E$16.10
AnswerA — $3.90
Step-by-step
  1. Change = amount paid − price = $10.00 − $6.10.
  2. Line up the decimal points and regroup: $10.00 − $6.10 = $3.90.
Quick checkCheck by adding back: $6.10 + $3.90 = $10.00, the amount paid.
Common mistakes
  • B ($4.00): subtracted only the dollars and left out the cents: 10 − 6 = 4
  • C ($4.10): subtracted the dollars but added the cents
  • D ($4.90): regrouped but did not take 1 from the dollars
  • E ($16.10): subtracted the smaller digit from the larger in each place instead of regrouping

Factors, Multiples and Primes

A factor divides a number with no remainder, and factors come in pairs that multiply to the number. The multiples of a number are that number times 1, 2, 3, and so on. A prime number has exactly two factors, 1 and itself; 1 is not prime.

Key formulas
Factor pairs
Multiples
Prime
Composite
Divisible by 2, 5 or 10
Divisible by 3 or 9

Multiples — nth multiple

Method. Multiply: 10 × 11 = 110.

Worked example
What is the 11th multiple of 10?
A21
B90
C100
D110
E120
AnswerD — 110
Step-by-step
  1. The 11th multiple of 10 is 11 × 10 = 110.
Quick check110 ÷ 10 = 11.
Common mistakes
  • A (21): added instead of multiplying
  • B (90): gave the 9th multiple
  • C (100): gave the 10th multiple
  • E (120): gave the 12th multiple

Multiples — least multiple above

Method. Divide 24 by 5, take the whole part, add 1, and multiply back.

Worked example
What is the least multiple of 5 that is greater than 24?
A20
B25
C29
D30
E35
AnswerB — 25
Step-by-step
  1. 24 ÷ 5 = 4 remainder 4.
  2. So 5 × 4 = 20 is below 24.
  3. The next multiple is 5 × 5 = 25.
Quick check25 > 24 and 25 − 5 = 20 ≤ 24.
Common mistakes
  • A (20): gave the multiple just below
  • C (29): added the number to the starting number
  • D (30): went one multiple too far
  • E (35): went two multiples too far: 5 × 7 = 35

Primes — which is prime

Method. Test the small primes 2, 3, 5, 7 only (any composite below 100 has one of them as a factor): digit sum for 3, last digit for 2 and 5, and 7 by trial.

Worked example
Which of these numbers is prime?
A9
B39
C43
D49
E57
AnswerC — 43
Step-by-step
  1. A prime has exactly two factors, 1 and itself.
  2. 43 has no factor other than 1 and 43.
  3. 9 = 3 × 3.
  4. 49 = 7 × 7.
  5. 57 = 3 × 19.
Quick checkCheck 43 ÷ 2, 3, 5, 7: none divides evenly.
Common mistakes
  • A (9): overlooked that 9 = 3 × 3
  • B (39): overlooked that 39 = 3 × 13
  • D (49): overlooked that 49 = 7 × 7
  • E (57): overlooked that 57 = 3 × 19

Factors — list all factors

Method. Find factor pairs from 1 upward and stop when the pairs meet at about .

Worked example
Which list shows all of the factors of 36?
A1, 2, 3, 6, 9, 12, 18, 36
B1, 2, 3, 4, 5, 6, 9, 12, 18, 36
C1, 2, 3, 36
D1, 2, 3, 4, 9, 12, 18, 36
E1, 2, 3, 4, 6, 9, 12, 18, 36
AnswerE — 1, 2, 3, 4, 6, 9, 12, 18, 36
Step-by-step
  1. Test each whole number from 1 up: factors come in pairs.
  2. The factor pairs of 36 are 1 × 36, 2 × 18, 3 × 12, 4 × 9, 6 × 6.
  3. All factors: 1, 2, 3, 4, 6, 9, 12, 18, 36.
Quick checkEach listed number divides 36 evenly, and the count 9 matches the pairs.
Common mistakes
  • A (1, 2, 3, 6, 9, 12, 18, 36): left out the factor 4
  • B (1, 2, 3, 4, 5, 6, 9, 12, 18, 36): included 5, which is not a factor
  • C (1, 2, 3, 36): listed only the prime factors, 1 and the number
  • D (1, 2, 3, 4, 9, 12, 18, 36): left out the factor 6 because it pairs with itself (6 × 6)

Factors — how many factors

Method. List factor pairs from 1 upward: 1 × 24, 2 × 12, 3 × 8, 4 × 6. Four pairs give 8 factors.

Worked example
How many positive factors does 24 have?
A2
B4
C6
D7
E8
AnswerE — 8
Step-by-step
  1. List them in pairs: 1, 2, 3, 4, 6, 8, 12, 24.
  2. That is 8 factors.
Quick check8 = number of factor pairs (4) doubled.
Common mistakes
  • A (2): counted only the prime factors
  • B (4): counted factor pairs, not factors
  • C (6): left out 1 and the number itself
  • D (7): left out the number itself (24) when listing factors

Divisibility — which number is divisible

Method. Rule for 9: digit sum divisible by 9.

Worked example
Which number is divisible by 9?
A1,315
B2,478
C4,873
D7,956
E8,346
AnswerD — 7,956
Step-by-step
  1. Use the divisibility rule for 9 (digit sum divisible by 9).
  2. 7,956 passes.
  3. The others leave remainders.
Quick check7,956 ÷ 9 = 884.
Common mistakes
  • A (1,315): failed the 9-rule: remainder 1
  • B (2,478): failed the 9-rule: remainder 3
  • C (4,873): failed the 9-rule: remainder 4
  • E (8,346): failed the 9-rule: remainder 3 (it passes only the 3-rule)

Primes — count the primes

Method. Cross out the evens and the multiples of 3, 5 and 7; what is left in the range are the primes.

Worked example
How many prime numbers are there from 30 to 40, including 30 and 40?
A1
B2
C3
D4
E5
AnswerB — 2
Step-by-step
  1. List the primes in the range: 31, 37.
  2. That is 2 primes.
Quick checkEach listed number has no factor of 2, 3, 5 or 7 (except itself).
Common mistakes
  • A (1): left out a prime
  • C (3): counted a composite number as prime
  • D (4): counted every number ending in 1, 3, 7 or 9 as prime: 31, 33, 37, 39
  • E (5): counted every odd number as prime

Word Problems

Read the question, decide which operation the story calls for, solve, and check that the answer makes sense. Some problems take two steps, such as finding a total cost and then the change.

Key formulas
Put together
Take apart or compare
Equal groups
Sharing equally
Change
Elapsed time
Hours to minutes

One-step story problems

Method. Decide the operation from the story (share → divide, equal rows → multiply, gave away → work backward by adding).

Worked example
Dev read 59 pages. Maria read 5 more pages than Dev. How many pages did Maria read?
A5
B54
C59
D63
E64
AnswerE — 64
Step-by-step
  1. “5 more than 59” means add.
  2. Add: 59 + 5 = 64 pages.
Quick check64 − 59 = 5, so Maria read 5 more pages ✓.
Common mistakes
  • A (5): gave only the difference
  • B (54): subtracted instead of adding
  • C (59): gave Dev's number
  • D (63): counted on 5 starting with 59 itself: 59, 60, 61, 62, 63

Money — making change

Method. Multiply first (total cost), then subtract from the amount paid.

Worked example
Ben buys 4 sandwiches that cost $3.25 each and pays with a $20 bill. How much change should Ben get?
A$7
B$8
C$10.25
D$13
E$16.75
AnswerA — $7
Step-by-step
  1. Total cost: 4 × $3.25 = $13.
  2. Change: $20 − $13 = $7.
Quick checkcost plus change = $13 + $7 = $20, the amount paid ✓.
Common mistakes
  • B ($8): left out the cents: 4 × $3 = $12 and $20 − $12 = $8
  • C ($10.25): counted one item too few
  • D ($13): gave the total cost instead of the change
  • E ($16.75): subtracted the price of only one sandwich

Elapsed time

Method. Count whole hours first, then adjust by the minutes; an hour has 60 minutes, not 100.

Worked example
A soccer practice starts at 2:45 p.m. and ends at 4:15 p.m. How many minutes long is it?
A90
B120
C130
D150
E170
AnswerA — 90
Step-by-step
  1. From 2:45 p.m. to 4:45 p.m. is 2 hours = 120 minutes.
  2. But 4:15 p.m. is 30 minutes before 4:45 p.m.
  3. So subtract 30 minutes.
  4. Total: 120 − 30 = 90 minutes.
Quick check2:45 p.m. plus 1 h 30 min is 4:15 p.m. ✓.
Common mistakes
  • B (120): counted only the whole hours
  • C (130): wrote 1 hour 30 minutes as the number 130
  • D (150): counted one hour too many
  • E (170): subtracted the clock times as if they were ordinary numbers

Time and unit conversion

Method. Convert to one unit (minutes) before multiplying.

Worked example
Maria studies for 1 hour 15 minutes each day for 7 days. How many minutes is that in all?
A75
B105
C112
D435
E525
AnswerE — 525
Step-by-step
  1. Change each session to minutes: 1 h 15 min = 1 × 60 + 15 = 75 minutes.
  2. Multiply by 7 days: 75 × 7 = 525 minutes.
Quick check525 minutes = 8 h 45 min, and 7 × (1 h 15 min) = 8 h 45 min ✓.
Common mistakes
  • A (75): forgot to multiply by the number of days
  • B (105): multiplied only the minutes by the number of days: 15 × 7 = 105
  • C (112): added the hours and minutes as if they were the same unit
  • D (435): multiplied only the hours by the number of days

Unit price

Method. Find the cost of one, then multiply.

Worked example
6 bottles of juice cost $24. At the same price each, how much do 3 bottles of juice cost?
A$8
B$12
C$18
D$24
E$72
AnswerB — $12
Step-by-step
  1. Price of one: $24 ÷ 6 = $4.
  2. Cost of 3: 3 × $4 = $12.
Quick check$12 ÷ 3 = $4, the same price as $24 ÷ 6 ✓.
Common mistakes
  • A ($8): divided the total cost by 3
  • C ($18): subtracted the number of bottles from the cost: $24 − 6 = $18
  • D ($24): gave the cost of 6 bottles of juice
  • E ($72): multiplied the cost of 6 by 3

Unit Rates and Measurement Conversions

A rate tells how much for one unit: divide the total by the number of units. Once you know the amount for one, multiply to find the amount for any number. To change a bigger unit to a smaller unit, multiply.

Key formulas
Amount for one
Amount for many
Same price each
Capacity
Bigger unit to smaller unit

Unit rates

Method. A unit rate is 'per 1': divide the total by the number of units.

Worked example
A train travels 160 miles in 4 hours at a steady speed. How many miles does it travel per hour?
A40
B156
C160
D164
E640
AnswerA — 40
Step-by-step
  1. Unit rate = miles ÷ hours.
  2. Unit rate = 160 ÷ 4.
  3. So Unit rate = 40 miles per hour.
Quick check40 miles per hour × 4 hours = 160 miles, the distance given.
Common mistakes
  • B (156): subtracted the hours from the miles
  • C (160): gave the total miles instead of the miles per hour
  • D (164): added the hours to the miles
  • E (640): multiplied instead of dividing

Measurement conversions

Method. Larger unit → smaller unit: multiply by 2.

Worked example
How many pints are in 8 quarts?
A4
B16
C32
D80
E160
AnswerB — 16
Step-by-step
  1. Each quart is 2 pints.
  2. Going from a larger unit to a smaller unit, multiply: 8 × 2 = 16 pints.
Quick check16 ÷ 2 = 8 quarts, the amount given.
Common mistakes
  • A (4): divided instead of multiplying
  • C (32): used 4 pints per quart instead of 2
  • D (80): used 10 pints per quart instead of 2
  • E (160): put an extra zero on the answer

Input and Output Rules

A rule changes every input into an output in the same way. Do the steps of the rule in order. To find a rule, see how the outputs change when the inputs go up by 1, then check the rule on every pair.

Key formulas
Use a rule
Growing pattern
Find the rule
Check

Input–output rules

Method. Do the steps in the order written: multiply first, then add or subtract.

Worked example
A function machine uses the rule “Multiply by 8, then add 4.” What is the output when the input is 6?
A10
B18
C32
D48
E52
AnswerE — 52
Step-by-step
  1. Follow the rule in order.
  2. Multiply: 6 × 8 = 48.
  3. Then add 4: 48 + 4 = 52.
Quick checkundo it — (52 − 4) ÷ 8 = 6, the input ✓.
Common mistakes
  • A (10): only added
  • B (18): added 8 instead of multiplying, then added 4: 6 + 8 + 4 = 18
  • C (32): multiplied by 4 and added 8
  • D (48): only multiplied

Input–output tables

Method. Find how much the output grows per 1 input (the multiplier), then fix the starting amount.

Worked example
In the table, every output comes from its input by the same rule. Input: 1, 2, 3, 4. Output: 5, 10, 15, 20. What is the output when the input is 7?
A12
B25
C35
D40
E55
AnswerC — 35
Step-by-step
  1. Each time the input goes up by 1, the output goes up by 5.
  2. So the rule multiplies by 5.
  3. Input 1 gives 5 = 5 × 1.
  4. So the rule is: multiply by 5.
  5. For input 7: 5 × 7 = 35.
Quick checkthe rule gives 5, 10, 15, 20 for inputs 1, 2, 3, 4, matching the table ✓.
Common mistakes
  • A (12): added instead of multiplying
  • B (25): found only the next output
  • D (40): found the output for 8 instead of 7: 8 × 5 = 40
  • E (55): added the step to the last output once for each unit of the input

Finding the rule

Method. Test each choice on ALL pairs, not just the first one.

Worked example
Which rule turns each input into its output? Input: 5, 6, 8. Output: 32, 37, 47.
AMultiply by 6, then add 2
BMultiply by 5, then add 7
CMultiply by 5
DAdd 5
EAdd 7, then multiply by 5
AnswerB — Multiply by 5, then add 7
Step-by-step
  1. Test the rule on every pair.
  2. 5 → 5 × 5 + 7 = 32.
  3. 6 → 6 × 5 + 7 = 37.
  4. 8 → 8 × 5 + 7 = 47.
  5. All three pairs match.
Quick checkthe input 8 gives 8 × 5 + 7 = 47, the last output ✓.
Common mistakes
  • A (Multiply by 6, then add 2): checked only the first pair
  • C (Multiply by 5): forgot the adding step: 5 × 5 = 25, not 32
  • D (Add 5): used the change in the outputs as the rule
  • E (Add 7, then multiply by 5): did the operations in the wrong order

Missing Numbers in Number Sentences

A letter or a box can stand for a missing number. Undo the operation to find it: subtraction undoes addition, and division undoes multiplication. Check by putting the number back into the sentence.

Key formulas
Missing number added
Missing number subtracted from
Missing factor
Missing number divided
Check

One-step equations

Method. Do the inverse operation to both sides in one step.

Worked example
Solve for x: x + 5 = 19
A−14
B5
C14
D19
E24
AnswerC — 14
Step-by-step
  1. Subtract 5 from both sides.
  2. x = 19 − 5.
  3. So x = 14.
Quick check14 + 5 = 19, which matches the right side.
Common mistakes
  • A (−14): made a sign error
  • B (5): gave the number added to x
  • D (19): forgot to move the constant
  • E (24): added instead of subtracting