Florida FAST · Math · Grade 5Grade 5: Study Guide
Grade 5 math on Florida's FAST (B.E.S.T. Mathematics benchmarks). One computer-adaptive session; no calculator in grade 5; an online reference sheet is available. Questions here are multiple choice and typed answers.
03.01 Reporting Categories (Grade 5): How This Course Groups the Benchmarks
Grade 5 math on Florida's FAST measures the B.E.S.T. Mathematics benchmarks in one computer-adaptive session (80 minutes at PM1 and PM2, 100 minutes at PM3). There is no calculator in grade 5, and an online reference sheet is available. The test reports four categories: Number Sense and Operations with Whole Numbers; Number Sense and Operations with Fractions and Decimals; Algebraic Reasoning; and Geometric Reasoning, Measurement, and Data Analysis and Probability. This topic walks through four content areas that match them closely: whole numbers and decimals; fractions; algebraic reasoning; and geometry, measurement, data and probability. (On the test, decimal operations are counted with fractions.) Official sample items and released tests are on the Florida Statewide Assessments Portal (flfast.org). The practice papers mix all four, with multiple-choice and typed-answer questions.
Whole Numbers and Decimals
Each place is 10 times the place to its right, so 1 one = 10 tenths = 100 hundredths = 1000 thousandths. Grade 5 adds and subtracts decimals to the thousandths, multiplies multi-digit whole numbers, divides by two-digit numbers, and multiplies and divides decimals to the hundredths. Line up the decimal points when you add or subtract, and estimate first to see if an answer makes sense.
Key formulas| Place value | 1=10×0.1=100×0.01=1000×0.001 |
| Expanded form | 5.304=5+103+1000+10004 |
| Multiply by 0.1 | a×0.1=a÷10 |
| Line up the decimal points | 3.5+0.27=3.50+0.27=3.77 |
Decimal place value
Method. Name each place after the decimal point before you read a digit.
Worked example. What is the value of the digit 6 in 2.169?
- (A) 0.6
- (B) 6
- (C) 0.06
- (D) 0.006
AnswerC — 0.06
Step-by-step- After the decimal point the places are tenths, hundredths, thousandths: 1 is in the tenths, 6 in the hundredths, 9 in the thousandths.
- So the 6 is worth 6 hundredths, which is 0.06.
Fast methodCount places after the point: first tenths, second hundredths.
Quick checkCheck: 2 + 0.1 + 0.06 + 0.009 = 2.169 ✓.
Why the other choices are wrong- A (0.6): read the 6 as if it were in the tenths place
- B (6): ignored the decimal point and called it 6 ones
- D (0.006): counted one place too far and put the 6 in the thousandths place
Multi-digit multiplication
Method. Multiply by each place of the second factor, then add the partial products.
Worked example. What is 46 × 23?
- (A) 818
- (B) 1,058
- (C) 230
- (D) 920
AnswerB — 1,058
Step-by-step- Break 23 into 20 + 3.
- 46 × 20 = 920 and 46 × 3 = 138.
- Add the partial products: 920 + 138 = 1,058.
Fast methodEstimate: 50 × 20 = 1,000, so the product should be near 1,000. Only 1,058 is close.
Quick checkCheck: 1,058 ÷ 23 = 46 ✓.
Why the other choices are wrong- A (818): multiplied only the matching places: 40 × 20 + 6 × 3 = 800 + 18 = 818
- C (230): did not shift the tens row: 138 + 92 = 230
- D (920): found only 46 × 20 = 920 and left out 46 × 3
Divide a decimal by a whole number
Method. Divide the total cost by the number of equal items.
Worked example. A box of 12 granola bars costs $8.40. Each bar costs the same. What is the cost of one bar, in dollars? Type your answer as a decimal.
Answer0.70 (accepted: 0.7, 0.70, .7)
Step-by-step- Divide the cost by the number of bars: 8.40 ÷ 12 = 0.70.
- One bar costs $0.70.
Fast methodThink in cents: 840 ÷ 12 = 70 cents.
Quick checkCheck: 0.70 × 12 = 8.40 ✓.
Fractions
To add or subtract fractions with unlike denominators, first rename them with a common denominator. To multiply fractions, multiply the numerators and multiply the denominators. A fraction is also a division: 3/4 means 3 ÷ 4. Dividing a unit fraction by a whole number greater than 1 makes it smaller; dividing a whole number by a unit fraction counts how many of those parts fit.
Key formulas| Common denominator | ba+dc=b×da×d+d×bc×b |
| Multiply fractions | ba×dc=b×da×c |
| Fraction as division | ba=a÷b |
| Unit fraction divided by a whole number | b1÷n=b×n1 |
Add fractions with unlike denominators
Method. Rename with a common denominator, then add the numerators.
Worked example. What is 2/3 + 1/5?
- (A) 3/8
- (B) 2/15
- (C) 3/15
- (D) 13/15
AnswerD — 13/15
Step-by-step- A common denominator is 15: 2/3 = 10/15 and 1/5 = 3/15.
- Add: 10/15 + 3/15 = 13/15.
Fast methodRename both fractions as fifteenths first.
Quick checkCheck: 13/15 − 3/15 = 10/15 = 2/3 ✓.
Why the other choices are wrong- A (3/8): added the numerators and added the denominators: 2 + 1 = 3 and 3 + 5 = 8
- B (2/15): multiplied the fractions instead of adding: 2 × 1 = 2 and 3 × 5 = 15
- C (3/15): added the numerators over 15 without renaming: 2 + 1 = 3
Multiply fractions
Method. Multiply top by top and bottom by bottom, then simplify.
Worked example. What is 3/4 × 2/7?
- (A) 3/14
- (B) 5/11
- (C) 21/8
- (D) 6/11
AnswerA — 3/14
Step-by-step- Multiply the numerators: 3 × 2 = 6. Multiply the denominators: 4 × 7 = 28.
- Simplify 6/28 by dividing both parts by 2: 6/28 = 3/14.
Fast methodCancel the common factor 2 first: 3/4 × 2/7 = 3/2 × 1/7 = 3/14.
Quick checkCheck: 3/14 = 6/28 ✓.
Why the other choices are wrong- B (5/11): added the numerators and the denominators: 3 + 2 = 5 and 4 + 7 = 11
- C (21/8): flipped the second fraction as if dividing: 3/4 × 7/2 = 21/8
- D (6/11): multiplied the numerators but added the denominators
Divide a unit fraction by a whole number
Method. Sharing a unit fraction among n people multiplies its denominator by n.
Worked example. Four friends share 1/3 of a pizza equally. What fraction of the whole pizza does each friend get?
- (A) 4/3
- (B) 1/7
- (C) 1/12
- (D) 3/4
AnswerC — 1/12
Step-by-step- Each friend gets 1/3 ÷ 4.
- Splitting thirds into 4 equal parts makes twelfths: 1/3 ÷ 4 = 1/12.
Fast methodDividing 1/b by n gives 1/(b × n).
Quick checkCheck: 4 × 1/12 = 4/12 = 1/3 ✓.
Why the other choices are wrong- A (4/3): multiplied 1/3 by 4 instead of dividing
- B (1/7): added the 3 and the 4 to get the denominator
- D (3/4): divided 3 by 4 and wrote 3/4
Algebraic Reasoning
Algebraic reasoning in grade 5 means working out numerical expressions in the right order, finding the unknown number that makes an equation true, and following input-output rules and number patterns. Do the work inside parentheses first, then multiply and divide from left to right, then add and subtract from left to right.
Key formulas| Order of operations | () → ×, ÷ → +, − |
| Unknown factor | n×7=56 ⇒ n=56÷7 |
| Input-output rule | output=input×3+1 |
| Distributive property | 6×(10+4)=6×10+6×4 |
Unknown factor
Method. Use the inverse operation to find a missing factor.
Worked example. What number makes 4 × n = 92 true?
- (A) 88
- (B) 23
- (C) 96
- (D) 368
AnswerB — 23
Step-by-step- Undo the multiplication by dividing: n = 92 ÷ 4.
- 92 ÷ 4 = 23, because 4 × 20 = 80 and 4 × 3 = 12, and 80 + 12 = 92.
Fast methodDividing by 4 is halving twice: 92 → 46 → 23.
Quick checkCheck: 4 × 23 = 92 ✓.
Why the other choices are wrong- A (88): subtracted: 92 − 4 = 88
- C (96): added: 92 + 4 = 96
- D (368): multiplied: 92 × 4 = 368
Order of operations
Method. Work inside the parentheses, then multiply, then add.
Worked example. What is 5 + 3 × (8 − 2)?
AnswerD — 23
Step-by-step- Parentheses first: 8 − 2 = 6.
- Multiply: 3 × 6 = 18.
- Add: 5 + 18 = 23.
Fast methodParentheses, then multiply, then add.
Quick checkCheck: 23 − 5 = 18 and 18 ÷ 3 = 6 ✓.
Why the other choices are wrong- A (48): worked left to right: (5 + 3) × 6 = 48
- B (27): ignored the parentheses: 5 + 24 − 2 = 27
- C (18): found 3 × 6 = 18 and forgot to add the 5
Input-output rule
Method. Apply each step of the rule in order.
Worked example. An input-output rule says: multiply the input by 4, then subtract 3. What is the output when the input is 12? Type your answer as a whole number.
Answer45 (accepted: 45)
Step-by-step- Multiply the input by 4: 12 × 4 = 48.
- Subtract 3: 48 − 3 = 45.
Fast methodFollow the rule in the order it is written.
Quick checkCheck: 45 + 3 = 48 and 48 ÷ 4 = 12 ✓.
Geometry, Measurement, Data and Probability
This area covers the volume of rectangular prisms, naming triangles and quadrilaterals by their sides and angles, plotting points in the first quadrant, converting units within one measurement system, and finding the mean, median, mode and range of a data set. Volume counts unit cubes, so it is measured in cubic units.
Key formulas| Volume of a rectangular prism | V=ℓ×w×h |
| Ordered pair | (x, y)=(across, up) |
| Unit conversions | 1 ft=12 in,1 kg=1000 g |
| Mean | mean=number of valuessum of the values |
| Range | range=greatest value−least value |
Volume of a rectangular prism
Method. Multiply the three edge lengths and write cubic units.
Worked example. A baking pan shaped like a rectangular prism is 11 inches long, 7 inches wide and 2 inches deep. What is the volume of the pan?
- (A) 154 cubic inches
- (B) 20 cubic inches
- (C) 77 cubic inches
- (D) 226 cubic inches
AnswerA — 154 cubic inches
Step-by-step- Multiply the length and the width: 11 × 7 = 77.
- Multiply by the depth: 77 × 2 = 154, so the volume is 154 cubic inches.
Fast methodVolume = length × width × height.
Quick checkCheck: one layer of 1-inch cubes holds 77 cubes, and there are 2 layers: 77 + 77 = 154 ✓.
Why the other choices are wrong- B (20 cubic inches): added the three lengths: 11 + 7 + 2 = 20
- C (77 cubic inches): multiplied only two of the lengths: 11 × 7 = 77
- D (226 cubic inches): found the surface area instead of the volume: 2 × (77 + 22 + 14) = 226
Coordinate plane
Method. Change the x-coordinate for across moves and the y-coordinate for up and down moves.
Worked example. Point P is at (4, 7). Point Q is 3 units to the right of P and 2 units down. What are the coordinates of Q?
- (A) (6, 4)
- (B) (7, 9)
- (C) (7, 5)
- (D) (1, 5)
AnswerC — (7, 5)
Step-by-step- Right 3 changes x: 4 + 3 = 7.
- Down 2 changes y: 7 − 2 = 5.
- So Q is at (7, 5).
Fast methodLeft and right change x; up and down change y.
Quick checkCheck: from (7, 5), moving left 3 and up 2 gives (4, 7) ✓.
Why the other choices are wrong- A ((6, 4)): moved 2 to the right and 3 down, mixing up the two moves
- B ((7, 9)): moved up instead of down
- D ((1, 5)): moved left instead of right
Mean
Method. Add all the values, then divide by how many there are.
Worked example. The heights of five plants, in inches, are 6, 9, 4, 9 and 7. What is the mean height?
- (A) 9 inches
- (B) 7 inches
- (C) 5 inches
- (D) 35 inches
AnswerB — 7 inches
Step-by-step- Add the heights: 6 + 9 + 4 + 9 + 7 = 35.
- Divide by the number of plants: 35 ÷ 5 = 7.
Fast methodMean = sum ÷ count.
Quick checkCheck: 7 × 5 = 35 ✓.
Why the other choices are wrong- A (9 inches): gave the mode, the value that appears most often
- C (5 inches): gave the range: 9 − 4 = 5
- D (35 inches): found the sum and forgot to divide by 5
03.02 Key Content (Grade 5)
Grade 5 math on Florida's FAST measures the B.E.S.T. Mathematics benchmarks in one computer-adaptive session, with no calculator and an online reference sheet. This topic goes deeper into the grade's key content: place value to the thousandths and rounding; multiplying and dividing multi-digit numbers and decimals; numerical expressions with the order of operations, input-output rules and number patterns; adding, subtracting and multiplying fractions and dividing with unit fractions; volume, shapes and the first quadrant of the coordinate plane; and converting units and finding the mean, median, mode and range.
Decimal Place Value and Rounding
Decimals in grade 5 go to the thousandths. To compare two decimals, line up the decimal points and compare place by place from the left. Multiplying by 10, 100 or 1000 moves every digit 1, 2 or 3 places to the left; dividing moves them to the right. To round, look at the digit one place to the right of the place you are rounding to.
Key formulas| Multiply by 10 | 2.35×10=23.5 |
| Divide by 100 | 46÷100=0.46 |
| Compare place by place | 0.509<0.59 because 0<9 in the hundredths place |
| Rounding rule | next digit ≥5 ⇒ round up |
Compare decimals
Method. Line up the places, fill with zeros, then compare from the left.
Worked example. Which of the four decimals below has the largest value?
- (A) 0.7
- (B) 0.078
- (C) 0.708
- (D) 0.699
AnswerC — 0.708
Step-by-step- Write each with three decimal places: 0.700, 0.078, 0.708 and 0.699.
- Compare the tenths: 0.700 and 0.708 have 7 tenths, 0.699 has 6 and 0.078 has 0. Then compare the thousandths of 0.700 and 0.708: 8 beats 0, so 0.708 is greatest.
Fast methodAdd zeros so every number has the same number of decimal places.
Quick checkCheck: 0.708 − 0.7 = 0.008, so 0.708 is more than 0.7, and 0.699 and 0.078 are both less than 0.7 ✓.
Why the other choices are wrong- A (0.7): thought the shortest decimal is greatest because tenths are bigger than thousandths
- B (0.078): ignored the 0 right after the decimal point and read 0.078 as 0.78
- D (0.699): compared only the last digits and thought 9 beats 8 and 7
Round decimals
Method. Find the rounding place, then look one digit to the right.
Worked example. Round 12.638 to the nearest tenth.
- (A) 12.7
- (B) 12.64
- (C) 13
- (D) 12.6
AnswerD — 12.6
Step-by-step- The tenths digit is 6. The next digit, in the hundredths place, is 3.
- 3 is less than 5, so keep the 6: 12.638 rounds to 12.6.
Fast methodOnly the digit right after the rounding place matters.
Quick checkCheck: 12.638 is between 12.6 and 12.7, and 12.65 is the halfway point; 12.638 is below it ✓.
Why the other choices are wrong- A (12.7): rounded up because of the 8 in the thousandths place instead of looking at the hundredths digit
- B (12.64): rounded to the nearest hundredth
- C (13): rounded to the nearest whole number
Divide by a power of 10
Method. Dividing by 1000 moves the digits three places to the right.
Worked example. A stack of 1,000 sheets of paper is 85 millimeters tall. How thick is one sheet, in millimeters? Type your answer as a decimal.
Answer0.085 (accepted: 0.085, .085)
Step-by-step- Divide the height by the number of sheets: 85 ÷ 1000.
- Dividing by 1000 moves each digit 3 places to the right: 85 ÷ 1000 = 0.085.
Fast methodThree zeros in 1000 means three places.
Quick checkCheck: 0.085 × 1000 = 85 ✓.
Multi-Digit Operations, Decimals and Expressions
Multiply multi-digit numbers with partial products, one place of the second factor at a time, and check a quotient by multiplying it by the divisor and adding any remainder. With decimals, estimate first: multiplying by 0.1 or 0.01 is the same as dividing by 10 or 100, dividing by 0.1 or 0.01 is the same as multiplying by 10 or 100, and for other decimal products you multiply as whole numbers and use the estimate to place the decimal point. A numerical expression is worked in a fixed order: parentheses first, then multiplication and division from left to right, then addition and subtraction from left to right. An input-output rule tells what to do to each input, and a number pattern follows a rule such as "start at 5 and add 4"; test a rule on every pair or term, not just the first one.
Key formulas| Partial products | 34×26=34×20+34×6 |
| Divide by 0.1, multiply by 0.01 | a÷0.1=a×10,a×0.01=a÷100 |
| Order of operations | () → ×, ÷ (left to right) → +, − (left to right) |
| Left to right | 24÷4×2=6×2=12 |
| Input-output rule | output=input×2+5 |
| Pattern rule | 5, 9, 13, 17, …(add 4) |
Divide by a two-digit number
Method. Use partial quotients: subtract large easy multiples of the divisor, then add the parts of the quotient.
Worked example. What is 2,346 ÷ 34?
- (A) 69
- (B) 609
- (C) 2312
- (D) 80
AnswerA — 69
Step-by-step- 34 × 60 = 2040, and 2346 − 2040 = 306.
- 34 × 9 = 306, so the quotient is 60 + 9 = 69.
Fast methodSubtract a big multiple of 34 first, then finish with a small one.
Quick checkCheck: 69 × 34 = 69 × 30 + 69 × 4 = 2070 + 276 = 2346 ✓.
Why the other choices are wrong- B (609): after 34 × 6 = 204 left 30, wrote a 0 because 34 does not go into 30, then brought down the 6 and wrote 9
- C (2312): subtracted instead of dividing: 2346 − 34 = 2312
- D (80): rounded to 2400 ÷ 30 = 80 and stopped at the estimate
Order of operations
Method. Work inside the parentheses, then multiply or divide, then add or subtract.
Worked example. What is 50 − (6 + 4) × 3?
- (A) 120
- (B) 20
- (C) 56
- (D) 144
AnswerB — 20
Step-by-step- Parentheses first: 6 + 4 = 10.
- Multiply: 10 × 3 = 30.
- Subtract: 50 − 30 = 20.
Fast methodDo the parentheses, then the multiplication, then the subtraction.
Quick checkCheck: 20 + 30 = 50 ✓.
Why the other choices are wrong- A (120): subtracted before multiplying: (50 − 10) × 3 = 120
- C (56): left out the parentheses: 50 − 6 + 4 × 3 = 44 + 12 = 56
- D (144): left out the parentheses and worked left to right: 50 − 6 + 4 = 48 and 48 × 3 = 144
Find an input-output rule
Method. Compare how the outputs change with how the inputs change, then test the rule on every pair.
Worked example. An input-output table has these pairs: input 2, output 9; input 5, output 18; input 8, output 27. Which rule fits every pair?
- (A) add 7
- (B) add 9
- (C) multiply by 4, then add 1
- (D) multiply by 3, then add 3
AnswerD — multiply by 3, then add 3
Step-by-step- Each time the input goes up 3, the output goes up 9, so the output grows 3 times as fast: multiply by 3.
- For the first pair, 2 × 3 = 6 and 9 − 6 = 3, so add 3.
- Test every pair: 2 × 3 + 3 = 9, 5 × 3 + 3 = 18 and 8 × 3 + 3 = 27.
Fast methodTest each choice on every pair, not just the first one.
Quick checkCheck: 8 × 3 + 3 = 24 + 3 = 27 ✓.
Why the other choices are wrong- A (add 7): used only the first pair: 9 − 2 = 7, but 5 + 7 = 12, not 18
- B (add 9): used the change in the outputs, 9 each time, as the rule; but 2 + 9 = 11, not 9
- C (multiply by 4, then add 1): checked only the first pair: 2 × 4 + 1 = 9, but 5 × 4 + 1 = 21, not 18
Operations with Fractions
Grade 5 adds and subtracts fractions and mixed numbers with unlike denominators, multiplies a fraction by a fraction, and divides a unit fraction by a whole number or a whole number by a unit fraction. Rename with a common denominator for adding and subtracting. For multiplying, multiply the numerators and the denominators. A whole number divided by 1/b asks how many b-ths fit, so it is the whole number times b.
Key formulas| Rename with a common denominator | 32+41=128+123 |
| Multiply fractions | ba×dc=b×da×c |
| Whole number divided by a unit fraction | n÷b1=n×b |
| Unit fraction divided by a whole number | b1÷n=b×n1 |
Whole number divided by a unit fraction
Method. Count how many unit fractions fit in the whole number.
Worked example. What is 3 ÷ 1/4?
- (A) 3/4
- (B) 4/3
- (C) 7
- (D) 12
AnswerD — 12
Step-by-step- Ask how many fourths fit into 3 wholes.
- Each whole has 4 fourths, so 3 ÷ 1/4 = 3 × 4 = 12.
Fast methodn ÷ 1/b = n × b.
Quick checkCheck: 12 × 1/4 = 12/4 = 3 ✓.
Why the other choices are wrong- A (3/4): multiplied 3 by 1/4 instead of dividing
- B (4/3): divided 4 by 3
- C (7): added 3 and 4
Add mixed numbers
Method. Add fraction parts with a common denominator, regroup any extra whole, then add the whole numbers.
Worked example. What is 1 2/3 + 3/4?
- (A) 2 5/12
- (B) 1 5/7
- (C) 1 5/12
- (D) 1 1/2
AnswerA — 2 5/12
Step-by-step- Rename the fractions: 2/3 = 8/12 and 3/4 = 9/12.
- Add the fraction parts: 8/12 + 9/12 = 17/12, which is 1 5/12.
- Add the whole number: 1 + 1 5/12 = 2 5/12.
Fast methodAdd the fraction parts, regroup, then add the wholes.
Quick checkCheck: 2 5/12 − 3/4 = 29/12 − 9/12 = 20/12 = 1 2/3 ✓.
Why the other choices are wrong- B (1 5/7): added the numerators and the denominators of the fractions
- C (1 5/12): got 17/12 for the fraction parts and forgot to add the whole number 1
- D (1 1/2): multiplied the fractions instead of adding: 1 + 6/12 = 1 1/2
Area with fractional sides
Method. Multiply the two fractional side lengths and simplify.
Worked example. A garden is 3/4 yard wide and 2/5 yard long. What is its area in square yards?
- (A) 5/9 square yard
- (B) 15/8 square yards
- (C) 3/10 square yard
- (D) 23/20 square yards
AnswerC — 3/10 square yard
Step-by-step- Area = length × width = 3/4 × 2/5.
- 3/4 × 2/5 = 6/20 = 3/10 square yard.
Fast methodMultiply the side lengths, just as with whole numbers.
Quick checkCheck: 3/10 is less than both sides, which makes sense for sides less than 1 ✓.
Why the other choices are wrong- A (5/9 square yard): added the numerators and the denominators
- B (15/8 square yards): divided instead of multiplying: 3/4 ÷ 2/5 = 15/8
- D (23/20 square yards): added the side lengths: 15/20 + 8/20 = 23/20
Volume, Shapes and the Coordinate Plane
The volume of a rectangular prism is length × width × height, or the area of the base times the height. A solid made of two prisms has a volume equal to the sum of the two volumes. Triangles are named by sides (equilateral, isosceles, scalene) and by angles (acute, right, obtuse). In the first quadrant, a point (x, y) is x units right of the origin and y units up.
Key formulas| Volume | V=ℓ×w×h |
| Volume from the base | V=B×h |
| Two prisms joined | V=V1+V2 |
| Distance along a grid line | (2,3)→(7,3): 7−2=5 units |
Volume of a cube
Method. Multiply the edge length by itself three times.
Worked example. A cube has edges 3 feet long. What is its volume?
- (A) 27 cubic feet
- (B) 9 cubic feet
- (C) 12 cubic feet
- (D) 54 cubic feet
AnswerA — 27 cubic feet
Step-by-step- Volume = 3 × 3 × 3.
- 3 × 3 = 9 and 9 × 3 = 27 cubic feet.
Fast methodA cube uses the same length three times.
Quick checkCheck: 3 layers of 9 cubes is 9 + 9 + 9 = 27 ✓.
Why the other choices are wrong- B (9 cubic feet): found the area of one face: 3 × 3 = 9
- C (12 cubic feet): added the edges of one face: 3 + 3 + 3 + 3 = 12
- D (54 cubic feet): found the surface area: 6 × 9 = 54
Volume of two joined prisms
Method. Split the solid into prisms, find each volume and add them.
Worked example. A step is built from two solid blocks that do not overlap. The bottom block is 6 feet by 2 feet by 1 foot. The top block is 3 feet by 2 feet by 1 foot. What is the volume of the step?
- (A) 72 cubic feet
- (B) 15 cubic feet
- (C) 12 cubic feet
- (D) 18 cubic feet
AnswerD — 18 cubic feet
Step-by-step- Bottom block: 6 × 2 × 1 = 12 cubic feet.
- Top block: 3 × 2 × 1 = 6 cubic feet.
- Total: 12 + 6 = 18 cubic feet.
Fast methodFind each block's volume, then add.
Quick checkCheck: 18 − 12 = 6 = 3 × 2 × 1 ✓.
Why the other choices are wrong- A (72 cubic feet): multiplied the two volumes: 12 × 6 = 72
- B (15 cubic feet): added all six lengths: 6 + 2 + 1 + 3 + 2 + 1 = 15
- C (12 cubic feet): found the volume of only the bottom block
Square on a coordinate grid
Method. Find the side length from two corners on one grid line, then move along the other direction by that length.
Worked example. A square on a coordinate grid has two corners at (2, 3) and (7, 3). Its other two corners are above these. Where is the corner directly above (7, 3)?
- (A) (8, 7)
- (B) (5, 5)
- (C) (7, 8)
- (D) (7, 5)
AnswerC — (7, 8)
Step-by-step- The bottom side runs from x = 2 to x = 7, so each side of the square is 7 − 2 = 5 units long.
- The corner above (7, 3) keeps x = 7 and moves up 5: y = 3 + 5 = 8, so it is (7, 8).
Fast methodAll four sides of a square have the same length, so move up by the length of the bottom side.
Quick checkCheck: (7, 3) to (7, 8) is 5 units, the same as (2, 3) to (7, 3) ✓.
Why the other choices are wrong- A ((8, 7)): found (7, 8) and then wrote the coordinates in the wrong order
- B ((5, 5)): used the side length 5 for both coordinates
- D ((7, 5)): used the side length 5 as the y-coordinate instead of adding it to 3
Converting Units and Using Data
To change a larger unit to a smaller unit, multiply; to change a smaller unit to a larger one, divide. Grade 5 data work finds the mean, median, mode and range of a data set. The median is the middle value after the data are put in order; with an even number of values it is halfway between the two middle values.
Key formulas| Length | 1 yd=3 ft=36 in |
| Capacity | 1 gal=4 qt,1 qt=4 c |
| Metric | 1 m=100 cm,1 L=1000 mL |
| Mean | mean=countsum |
| Median of an even count | median=2middle value 1+middle value 2 |
Convert customary units with a decimal
Method. Multiply when you change to a smaller unit; split a decimal into its whole and part to multiply mentally.
Worked example. How many quarts are in 3.5 gallons? (1 gallon = 4 quarts)
- (A) 7.5
- (B) 14
- (C) 0.875
- (D) 35
AnswerB — 14
Step-by-step- 1 gallon = 4 quarts, and a quart is smaller than a gallon, so multiply.
- 3.5 × 4 = 12 + 2 = 14 quarts.
Fast method3 gallons = 12 quarts and half a gallon = 2 quarts, so 12 + 2 = 14.
Quick checkCheck: 14 ÷ 4 = 3.5 ✓.
Why the other choices are wrong- A (7.5): added instead of multiplying: 3.5 + 4 = 7.5
- C (0.875): divided instead of multiplying: 3.5 ÷ 4 = 0.875
- D (35): multiplied by 10 instead of 4: 3.5 × 10 = 35
Mean and median
Method. Add and divide by the count for the mean; order the data and find the middle for the median.
Worked example. A player's scores in six rounds of a game were 8, 14, 11, 20, 14 and 5 points. What are the mean and the median of the scores?
- (A) mean 12, median 12.5
- (B) mean 12.5, median 12
- (C) mean 12, median 15.5
- (D) mean 14.4, median 12.5
AnswerA — mean 12, median 12.5
Step-by-step- Mean: 8 + 14 + 11 + 20 + 14 + 5 = 72, and 72 ÷ 6 = 12.
- Median: order the scores 5, 8, 11, 14, 14, 20. The two middle values are 11 and 14: (11 + 14) ÷ 2 = 12.5.
Fast methodMean = sum ÷ count. For the median, order first, then find the middle.
Quick checkCheck: 6 × 12 = 72 ✓, and three scores are below 12.5 and three are above ✓.
Why the other choices are wrong- B (mean 12.5, median 12): swapped the two measures
- C (mean 12, median 15.5): took the middle of the list without ordering it: (11 + 20) ÷ 2 = 15.5
- D (mean 14.4, median 12.5): divided the sum by 5 instead of 6: 72 ÷ 5 = 14.4
Mean
Method. Add all the values and divide by how many there are.
Worked example. A runner's times for 4 laps were 72, 68, 75 and 69 seconds. What was the mean lap time in seconds? Type your answer as a whole number.
Answer71 (accepted: 71)
Step-by-step- Add the times: 72 + 68 + 75 + 69 = 284.
- Divide by 4: 284 ÷ 4 = 71.
Fast methodMean = sum ÷ count.
Quick checkCheck: 71 × 4 = 284 ✓.