Massachusetts MCAS · Math · Grade 8

Grade 8: Study Guide

Grade 8 mathematics on the Massachusetts MCAS, built on the 2017 Massachusetts Curriculum Framework for Mathematics. The real test has two untimed sessions of about 90 minutes each, with 40 items including multiple-choice, short-answer and constructed-response questions, no calculator in Session 1, a calculator in Session 2, and a grade 8 reference sheet. Meeting Expectations starts at a scaled score of 500 (scale 440–560). Questions here are multiple choice and typed answers; the timer is a practice target.

06.01 Number System, Expressions and Equations (Grade 8)

This topic covers grade 8 The Number System (rational and irrational numbers, repeating decimals as fractions, and estimating irrational numbers) and Expressions and Equations (integer exponents, square and cube roots, scientific notation, proportional relationships and slope, y = mx + b, linear equations with one, no or infinitely many solutions, and systems of two linear equations solved by graphing, inspection, substitution and elimination); together these are about 40% of the grade 8 MCAS. The real grade 8 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ hours each) with 40 scored items, including 4 constructed-response questions. Session 1 allows no calculator; in Session 2 you may use a scientific calculator, the TI graphing calculator or the Desmos graphing calculator. You also get the grade 8 reference sheet (unit conversions, area formulas, circle formulas, volume of prisms, cylinders, cones and spheres, and the Pythagorean theorem). Items marked calculator here match Session 2; the rest are meant to be done without one. The real test has no time limit; aim for about 3 minutes per question as a practice target.

Rational and Irrational Numbers

A rational number can be written as a fraction a/b of two integers (b ≠ 0); its decimal form either ends (0.75) or repeats forever (0.58333…). An irrational number, such as π or √2, has a decimal form that never ends and never repeats. To change a repeating decimal into a fraction, let x be the number, multiply by 10, 100, … to line up the repeating block, subtract, and solve. To estimate an irrational number, trap it between squares (6.3² = 39.69 < 40 < 40.96 = 6.4², so √40 is between 6.3 and 6.4) and use π ≈ 3.14. Common traps: calling every square root irrational (√49 = 7 is rational), calling every never-ending decimal irrational (repeating decimals are rational), and using π ≈ 3 when a tenths estimate is needed.

Key formulas
Rational numberab,a,b integers, b≠0\dfrac{a}{b},\quad a,b\ \text{integers},\ b\ne 0
Repeating decimal to fractionx=0.45‾ ⇒ 100x−x=45 ⇒ x=4599=511x=0.\overline{45}\ \Rightarrow\ 100x-x=45\ \Rightarrow\ x=\dfrac{45}{99}=\dfrac{5}{11}
Trapping a square root6.32=39.69<40<40.96=6.42 ⇒ 6.3<40<6.46.3^2=39.69<40<40.96=6.4^2\ \Rightarrow\ 6.3<\sqrt{40}<6.4
Useful approximationsπ≈3.14,2≈1.41,3≈1.73\pi\approx 3.14,\quad \sqrt{2}\approx 1.41,\quad \sqrt{3}\approx 1.73

Identifying an irrational number (8.NS.A.1)

Method. Test each number: can it be written as integer/integer? If not (π, √ of a non-perfect square), it is irrational.

Worked example. Which number is irrational?

  • (A) √11
  • (B) √49
  • (C) 0.333… (the 3 repeats forever)
  • (D) −5/8
AnswerA — √11
Step-by-step
  1. A rational number can be written as a fraction of two integers; its decimal ends or repeats.
  2. √49 = 7, 0.333… = 1/3 and −5/8 are all fractions of integers, so they are rational.
  3. 11 is not a perfect square (3² = 9 and 4² = 16), so √11 is a non-repeating, non-ending decimal: irrational.
Fast methodThe square root of a whole number that is not a perfect square is irrational.
Quick checkCheck: 3.3² = 10.89 and 3.4² = 11.56, so √11 is between 3.3 and 3.4 and is not a whole number or simple fraction ✓.
Why the other choices are wrong
  • B (√49): saw a square root symbol and assumed the number is irrational, but 49 = 7², so √49 = 7
  • C (0.333… (the 3 repeats forever)): thought a decimal that never ends is irrational, but a repeating decimal equals 1/3
  • D (−5/8): thought a negative fraction cannot be rational, but any integer over a nonzero integer is rational

Repeating decimal to a fraction (8.NS.A.1)

Method. Multiply by 10 raised to the length of the repeating block, subtract the original number, and solve.

Worked example. The number 0.4545… has the digits 45 repeating forever. Which fraction in simplest form is equal to 0.4545…?

  • (A) 9/20
  • (B) 4/9
  • (C) 5/11
  • (D) 5/111
AnswerC — 5/11
Step-by-step
  1. Let x = 0.4545…. The block 45 has 2 digits, so multiply by 100: 100x = 45.4545….
  2. Subtract: 100x − x = 45.4545… − 0.4545…, so 99x = 45.
  3. x = 45/99. Divide the top and bottom by 9: x = 5/11.
Fast methodA 2-digit repeating block over 99: 0.4545… = 45/99 = 5/11.
Quick checkCheck: 5 ÷ 11 = 0.4545… ✓.
Why the other choices are wrong
  • A (9/20): ignored the repeat and wrote 0.45 = 45/100 = 9/20
  • B (4/9): repeated only the 4, using 0.444… = 4/9
  • D (5/111): divided by 999, which is used for a three-digit repeating block: 45/999 = 5/111

Ordering rational and irrational numbers (8.NS.A.2)

Method. Approximate each irrational number by squaring nearby decimals (for roots) or using π ≈ 3.14, then compare decimals.

Worked example. Which list shows the numbers √60, 7.8, 31/4 and 2π + 1.5 in order from least to greatest?

  • (A) 2π + 1.5, √60, 31/4, 7.8
  • (B) √60, 31/4, 2π + 1.5, 7.8
  • (C) 31/4, √60, 2π + 1.5, 7.8
  • (D) 31/4, 2π + 1.5, 7.8, √60
AnswerB — √60, 31/4, 2π + 1.5, 7.8
Step-by-step
  1. 31/4 = 7.75 and 7.8 is already a decimal.
  2. Use π ≈ 3.14: 2π + 1.5 ≈ 6.28 + 1.5 = 7.78.
  3. √60: 7.7² = 59.29 and 7.75² = 60.0625, so √60 is between 7.7 and 7.75 (about 7.746).
  4. Least to greatest: √60 (≈ 7.746), 31/4 (7.75), 2π + 1.5 (≈ 7.78), 7.8.
Fast methodTurn every number into a decimal to the hundredths, then compare.
Quick checkCheck: 7.746 < 7.75 < 7.78 < 7.8 ✓.
Why the other choices are wrong
  • A (2π + 1.5, √60, 31/4, 7.8): used π ≈ 3, so 2π + 1.5 ≈ 7.5 and put it first
  • C (31/4, √60, 2π + 1.5, 7.8): wrote 31 ÷ 4 = 7 R 3 as 7.3 instead of 7.75
  • D (31/4, 2π + 1.5, 7.8, √60): rounded √60 up to √64 = 8 and put it last

Integer Exponents, Roots and Scientific Notation

Use the exponent properties only with the same base: multiply → add the exponents, divide → subtract, power of a power → multiply. Any nonzero number to the power 0 is 1, and a negative exponent means a reciprocal (5−2^{-2} = 1/25, not −25). x2^{2} = p has two solutions, ±√p; x3^{3} = p has one, ∛p. Know the perfect squares to about 15² and the perfect cubes to about 5³. A number in scientific notation is a × 10n^{n} with 1 ≤ a < 10. To multiply or divide, work with the coefficients and the powers of 10 separately; to add or subtract, first rewrite with the same power of 10. A calculator may show 4.6E−5 for 4.6 × 10−5^{-5}. Common traps: multiplying the base by the exponent, adding exponents when the bases differ, forgetting the negative square root, and leaving an answer such as 14.3 × 106^{6} that is not in scientific notation.

Key formulas
Product and quotient of powersam⋅an=am+n,aman=am−na^m\cdot a^n=a^{m+n},\qquad \dfrac{a^m}{a^n}=a^{m-n}
Power of a power, power of a product(am)n=amn,(ab)n=anbn(a^m)^n=a^{mn},\qquad (ab)^n=a^n b^n
Zero and negative exponentsa0=1,a−n=1an(a≠0)a^0=1,\qquad a^{-n}=\dfrac{1}{a^n}\quad (a\ne 0)
Square and cube rootsx2=p⇒x=±p,x3=p⇒x=p3x^2=p\Rightarrow x=\pm\sqrt{p},\qquad x^3=p\Rightarrow x=\sqrt[3]{p}
Scientific notationa×10n,1≤a<10, n an integera\times 10^{n},\quad 1\le a<10,\ n\ \text{an integer}

Negative exponents (8.EE.A.1)

Method. a−n^{-n} = 1/an^{n}: a negative exponent never makes the number negative.

Worked example. Which value is equal to 5−2^{-2}?

  • (A) −25
  • (B) −10
  • (C) 1/10
  • (D) 1/25
AnswerD — 1/25
Step-by-step
  1. A negative exponent means the reciprocal: 5−2^{-2} = 1/52^{2}.
  2. 52^{2} = 5 × 5 = 25, so 5−2^{-2} = 1/25.
Fast methodFlip to the denominator and make the exponent positive.
Quick checkCheck: 52^{2} × 5−2^{-2} = 50^{0} = 1, and 25 × 1/25 = 1 ✓.
Why the other choices are wrong
  • A (−25): thought a negative exponent makes the answer negative: −(5²) = −25
  • B (−10): multiplied the base by the exponent: 5 × (−2) = −10
  • C (1/10): multiplied 5 × 2 and took the reciprocal: 1/10

Solving x² = p with square roots (8.EE.A.2)

Method. x2^{2} = p (p > 0) has two solutions, x = √p and x = −√p.

Worked example. Which gives all the solutions of the equation x2^{2} = 81/16?

  • (A) x = 9/4 only
  • (B) x = 81/32 or x = −81/32
  • (C) x = 9/4 or x = −9/4
  • (D) x = 9/16 or x = −9/16
AnswerC — x = 9/4 or x = −9/4
Step-by-step
  1. x2^{2} = 81/16 asks: which numbers times themselves give 81/16?
  2. √(81/16) = √81/√16 = 9/4.
  3. Both 9/4 and −9/4 work, because (−9/4) × (−9/4) = 81/16.
Fast methodTake the square root of the top and the bottom, then write ±.
Quick checkCheck: (9/4)2^{2} = 81/16 and (−9/4)2^{2} = 81/16 ✓.
Why the other choices are wrong
  • A (x = 9/4 only): forgot that a negative number squared is also positive, so missed x = −9/4
  • B (x = 81/32 or x = −81/32): divided 81/16 by 2 instead of taking the square root
  • D (x = 9/16 or x = −9/16): took the square root of the numerator only

Adding numbers in scientific notation and standard form (8.EE.A.4)

Method. To add or subtract in scientific notation, rewrite with the same power of 10, add the coefficients, then adjust to 1 ≤ a < 10.

Worked example. A town used 4.8 × 106^{6} gallons of water on Monday and 950,000 gallons on Tuesday. What is the total for the two days, in scientific notation?

  • (A) 5.75 × 106^{6}
  • (B) 1.43 × 107^{7}
  • (C) 1.43 × 1012^{12}
  • (D) 4.895 × 106^{6}
AnswerA — 5.75 × 106^{6}
Step-by-step
  1. Write both numbers with the same power of 10: 950,000 = 0.95 × 106^{6}.
  2. Add the coefficients: 4.8 + 0.95 = 5.75.
  3. Total = 5.75 × 106^{6} gallons (5,750,000 gallons).
Fast methodMatch the powers of 10 first; only then add the coefficients.
Quick checkCheck: 4,800,000 + 950,000 = 5,750,000 = 5.75 × 106^{6} ✓.
Why the other choices are wrong
  • B (1.43 × 107^{7}): wrote 950,000 as 9.5 × 105^{5}, then added 4.8 + 9.5 = 14.3 and kept 106^{6}
  • C (1.43 × 1012^{12}): added the coefficients 4.8 + 9.5 = 14.3 and also added the exponents 6 + 5
  • D (4.895 × 106^{6}): wrote 950,000 as 9.5 × 104^{4}, which is only 95,000

Proportional Relationships, Slope and y = mx + b

The graph of a proportional relationship y = kx is a line through (0, 0), and the unit rate k is its slope; the point (1, k) is on the graph. To compare two proportional relationships given in different ways (an equation, a table, a description, or points on a graph), find each unit rate. Slope triangles drawn on the same line are similar, so rise/run is the same anywhere on the line. A line through the origin has equation y = mx; a line that crosses the y-axis at b has equation y = mx + b. Parallel lines have the same slope. Common traps: using run over rise, losing a negative sign, and using a point's y-value as the y-intercept.

Key formulas
Slope from two pointsm=y2−y1x2−x1m=\dfrac{y_2-y_1}{x_2-x_1}
Proportional relationshipy=kx,k=yx=unit rate=slopey=kx,\quad k=\dfrac{y}{x}=\text{unit rate}=\text{slope}
Line with y-intercept by=mx+by=mx+b
Similar slope trianglesrise1run1=rise2run2=m\dfrac{\text{rise}_1}{\text{run}_1}=\dfrac{\text{rise}_2}{\text{run}_2}=m

Unit rate as slope (8.EE.B.5)

Method. For a proportional relationship, the unit rate (y per 1 x) is the slope of its graph.

Worked example. A printer prints pages at a constant rate. It prints 84 pages in 6 minutes. The equation y = kx relates y, the number of pages, to x, the number of minutes. What is the value of k, the slope of the graph?

  • (A) 1/14
  • (B) 84
  • (C) 90
  • (D) 14
AnswerD — 14
Step-by-step
  1. In y = kx, k is the unit rate: pages per 1 minute.
  2. k = 84 ÷ 6 = 14 pages per minute.
  3. The slope of the graph is 14.
Fast methodSlope of a proportional graph = y ÷ x for any point.
Quick checkCheck: 14 × 6 = 84 ✓.
Why the other choices are wrong
  • A (1/14): divided minutes by pages (6/84), which gives minutes per page
  • B (84): used the total number of pages instead of the rate
  • C (90): added 84 + 6

Slope from similar triangles (8.EE.B.6)

Method. Similar slope triangles on a line give the same ratio rise/run, which is the slope.

Worked example. A line passes through the origin. A slope triangle drawn along the line has a horizontal leg of 4 units and a vertical leg of 3 units. A larger slope triangle along the same line has a horizontal leg of 10 units. What is the length of its vertical leg?

  • (A) 9
  • (B) 7.5
  • (C) 40/3
  • (D) 30
AnswerB — 7.5
Step-by-step
  1. Slope triangles along one line are similar, so rise/run is the same for both.
  2. Small triangle: rise/run = 3/4.
  3. Large triangle: rise/10 = 3/4, so rise = 10 × 3/4 = 7.5 units.
Fast methodSame line, same slope: rise = slope × run.
Quick checkCheck: 7.5/10 = 0.75 = 3/4 ✓.
Why the other choices are wrong
  • A (9): added instead of scaling: the horizontal leg grew by 6, so added 6 to 3
  • C (40/3): used run over rise: 10 × 4/3
  • D (30): multiplied 10 × 3 without dividing by 4

Equation y = mx + b from two points (8.EE.B.6)

Method. Slope = change in y ÷ change in x; then substitute one point into y = mx + b to find b.

Worked example. A line passes through the points (−2, 7) and (4, −2). Which equation describes the line?

  • (A) y = (3/2)x + 10
  • (B) y = −(3/2)x + 4
  • (C) y = −(2/3)x + 17/3
  • (D) y = −(3/2)x + 7
AnswerB — y = −(3/2)x + 4
Step-by-step
  1. Slope: m = (−2 − 7)/(4 − (−2)) = −9/6 = −3/2.
  2. Substitute (−2, 7) into y = mx + b: 7 = (−3/2)(−2) + b = 3 + b, so b = 4.
  3. The equation is y = −(3/2)x + 4.
Fast methodFind m from the two points, then put one point in to find b.
Quick checkCheck with (4, −2): −(3/2)(4) + 4 = −6 + 4 = −2 ✓.
Why the other choices are wrong
  • A (y = (3/2)x + 10): made a sign slip and got slope +3/2, then b = 7 − (3/2)(−2) = 10
  • C (y = −(2/3)x + 17/3): found run over rise (6/−9 = −2/3), then b = 7 − (−2/3)(−2) = 17/3
  • D (y = −(3/2)x + 7): used the y-coordinate of the first point, 7, as the y-intercept

Linear Equations and Systems of Two Equations

Solve one-variable linear equations by distributing to every term, combining like terms on each side, and then using inverse operations. Rational coefficients work the same way. After simplifying to ax + b = cx + d: if a ≠ c there is exactly one solution; if a = c and b ≠ d there is no solution; if both sides are identical there are infinitely many. A system of two linear equations is solved by the point where the lines cross. Solve by graphing, by inspection (same slope and different intercepts → no solution; same line → infinitely many), by substitution, or by elimination. In word problems write one equation for each fact, solve, and answer the question that was asked. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points; the multi-step items here lay out their solutions as Part A, Part B and Part C. Common traps: distributing to only the first term, sign errors when moving terms, and giving the wrong variable as the answer.

Key formulas
Distributive propertya(b+c)=ab+aca(b+c)=ab+ac
Number of solutions of ax + b = cx + da≠c: one;a=c, b≠d: none;a=c, b=d: infinitely manya\ne c:\ \text{one};\quad a=c,\ b\ne d:\ \text{none};\quad a=c,\ b=d:\ \text{infinitely many}
Substitutiony=x+2, 3x+y=18 ⇒ 3x+(x+2)=18y=x+2,\ 3x+y=18\ \Rightarrow\ 3x+(x+2)=18
Elimination(2x+3y=13)+(4x−3y=−1) ⇒ 6x=12(2x+3y=13)+(4x-3y=-1)\ \Rightarrow\ 6x=12
Systems by inspectionsame m, different b: no solution;same m and b: infinitely many\text{same } m,\ \text{different } b:\ \text{no solution};\quad \text{same } m \text{ and } b:\ \text{infinitely many}

Solving a linear equation with the distributive property (8.EE.C.7b)

Method. Distribute, combine like terms, then use inverse operations on both sides.

Worked example. What is the solution of 3(x − 4) = 2x + 5?

  • (A) x = 9
  • (B) x = −7
  • (C) x = 17/5
  • (D) x = 17
AnswerD — x = 17
Step-by-step
  1. Distribute: 3x − 12 = 2x + 5.
  2. Subtract 2x from both sides: x − 12 = 5.
  3. Add 12 to both sides: x = 17.
Fast methodDistribute to EVERY term, collect x on one side, constants on the other.
Quick checkCheck: 3(17 − 4) = 3 × 13 = 39 and 2(17) + 5 = 39 ✓.
Why the other choices are wrong
  • A (x = 9): distributed 3 only to x: 3x − 4 = 2x + 5
  • B (x = −7): moved −12 to the other side without changing its sign: x = 5 − 12
  • C (x = 17/5): added 2x to both sides instead of subtracting: 5x = 17

Number of solutions of a linear equation (8.EE.C.7a)

Method. Simplify to the form ax + b = cx + d: a ≠ c gives one solution; a = c and b ≠ d gives none; a = c and b = d gives infinitely many.

Worked example. How many solutions does the equation 4(2x − 3) + 5 = 8x − 7 have?

  • (A) Infinitely many solutions
  • (B) No solution
  • (C) Exactly one solution, x = 0
  • (D) Exactly two solutions
AnswerA — Infinitely many solutions
Step-by-step
  1. Distribute: 8x − 12 + 5 = 8x − 7, so 8x − 7 = 8x − 7.
  2. Subtract 8x from both sides: −7 = −7, which is always true.
  3. Every value of x works, so there are infinitely many solutions.
Fast methodSimplify both sides; identical sides mean infinitely many solutions.
Quick checkCheck two values: x = 0 gives −7 = −7 and x = 1 gives 1 = 1 ✓.
Why the other choices are wrong
  • B (No solution): distributed 4 only to 2x, getting 8x + 2 = 8x − 7, a false statement
  • C (Exactly one solution, x = 0): reached 0 = 0 and read it as x = 0
  • D (Exactly two solutions): counted the two x-terms as two solutions

Solving a system in context (8.EE.C.8c)

Method. Write one equation for the count and one for the money, then solve by substitution or elimination.

Worked example. A school play sold 120 tickets for a total of $820. Adult tickets cost $9 each and student tickets cost $5 each. How many adult tickets were sold?

  • (A) 65
  • (B) 220
  • (C) 55
  • (D) 44
AnswerC — 55
Step-by-step
  1. Part A: Let a = adult tickets and s = student tickets. Then a + s = 120 and 9a + 5s = 820.
  2. Part B: From the first equation, s = 120 − a. Substitute: 9a + 5(120 − a) = 820, so 9a + 600 − 5a = 820.
  3. Part C: 4a = 220, so a = 55 adult tickets (and s = 65 student tickets).
Fast methodIf all 120 were student tickets the total would be $600; each adult ticket adds $4, and $220 ÷ $4 = 55.
Quick checkCheck: 55 + 65 = 120 and 9(55) + 5(65) = 495 + 325 = 820 ✓.
Why the other choices are wrong
  • A (65): solved the system correctly but gave the number of student tickets
  • B (220): stopped at 4a = 220 and did not divide by 4
  • D (44): divided 220 by the student price, 5, instead of by 9 − 5 = 4

06.02 Functions (Grade 8)

This topic covers grade 8 Functions: what a function is (each input has exactly one output), comparing functions shown as equations, tables, graphs and descriptions, telling linear from nonlinear functions, building linear models from a rate of change and an initial value, and describing and sketching qualitative graphs; together these are about 20% of the grade 8 MCAS. Function notation such as f(x) is not required in grade 8, so rules are written as equations like y = 3x − 4 or in words. The real grade 8 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ hours each) with 40 scored items, including 4 constructed-response questions; Session 1 allows no calculator, and Session 2 allows a scientific calculator, a TI graphing calculator or the Desmos graphing calculator. You get the grade 8 reference sheet (unit conversions, area and volume formulas, volume of a cylinder, cone and sphere, and the Pythagorean theorem). On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. The real test has no time limit; aim for about 3 minutes per question as a practice target.

What Is a Function?

A function is a rule that assigns to each input exactly one output. A relation can be shown as a set of ordered pairs (input, output), a table, a mapping, an equation, a graph or a sentence. To test a relation, look at the inputs: if any input is paired with two different outputs, it is not a function. Outputs may repeat; two inputs can share the same output. On a graph, this means no vertical line meets the graph in more than one point. Grade 8 does not require function notation; you will see rules written as y = 3x − 4 or in words. Traps: checking the outputs instead of the inputs, and thinking a function must be linear.

Key formulas
Definitioneach input x ⟶ exactly one output y\text{each input }x\ \longrightarrow\ \text{exactly one output }y
Not a function(a, p) and (a, q) with p≠q(a,\,p)\text{ and }(a,\,q)\text{ with }p\ne q
Repeated outputs are allowed(1, 5) and (2, 5) can both belong to a function(1,\,5)\text{ and }(2,\,5)\ \text{can both belong to a function}
Vertical line testa line x=a meets the graph at most once\text{a line }x=a\text{ meets the graph at most once}

Identifying a function from ordered pairs (8.F.A.1)

Method. List the inputs; a repeated input with a different output means the relation is not a function.

Worked example. Which set of ordered pairs represents a function?

  • (A) {(−2, 3), (0, 3), (2, 3), (4, 3)}
  • (B) {(1, 4), (2, 5), (1, 6), (3, 7)}
  • (C) {(5, 0), (5, 1), (5, 2), (5, 3)}
  • (D) {(0, 1), (3, 2), (0, 2), (6, 3)}
AnswerA — {(−2, 3), (0, 3), (2, 3), (4, 3)}
Step-by-step
  1. A function gives each input exactly one output, so check whether any input repeats with a different output.
  2. In {(−2, 3), (0, 3), (2, 3), (4, 3)} the inputs −2, 0, 2, 4 are all different, so each input has one output. The output 3 repeating is allowed.
  3. Each of the other sets has an input with two outputs: 1 → 4 and 6; 5 → 0, 1, 2, 3; 0 → 1 and 2.
Fast methodScan the first numbers only: if no input repeats, it is a function.
Quick checkCheck: a vertical line x = a passes through at most one of the points (−2, 3), (0, 3), (2, 3), (4, 3) ✓.
Why the other choices are wrong
  • B ({(1, 4), (2, 5), (1, 6), (3, 7)}): checked that the outputs 4, 5, 6, 7 are all different instead of checking the inputs (input 1 has two outputs)
  • C ({(5, 0), (5, 1), (5, 2), (5, 3)}): thought a function only needs each output to appear once (input 5 has four outputs)
  • D ({(0, 1), (3, 2), (0, 2), (6, 3)}): saw the outputs increase and called it a function, missing that input 0 has outputs 1 and 2

Explaining why a relation is not a function (8.F.A.1)

Method. The only reason a relation fails to be a function is an input with two or more different outputs.

Worked example. A relation is the set {(3, 1), (5, 2), (3, 4), (7, 6)}. Which statement correctly explains why this relation is NOT a function?

  • (A) The outputs 1, 2, 4, 6 do not increase by the same amount.
  • (B) The inputs 3, 5, 7 are all odd numbers.
  • (C) The input 3 is paired with two different outputs, 1 and 4.
  • (D) The output 4 is greater than the input 3.
AnswerC — The input 3 is paired with two different outputs, 1 and 4.
Step-by-step
  1. A relation fails to be a function when one input has more than one output.
  2. The input 3 appears in (3, 1) and in (3, 4), so 3 has two outputs.
  3. So the relation is not a function. The other statements are true or false facts about the numbers, but none of them is the reason.
Fast methodFind a repeated input with different outputs; that pair is the reason.
Quick checkCheck: the vertical line x = 3 would pass through both (3, 1) and (3, 4) ✓.
Why the other choices are wrong
  • A (The outputs 1, 2, 4, 6 do not increase by the same amount.): confused "function" with "linear function"
  • B (The inputs 3, 5, 7 are all odd numbers.): picked a pattern in the numbers that has nothing to do with the definition
  • D (The output 4 is greater than the input 3.): thought an output must be less than its input

Functions in real-world relationships (8.F.A.1)

Method. Test a context by trying to find one input that could give two different outputs.

Worked example. Which relationship is a function?

  • (A) Input: a student's age, in years. Output: that student's height, in centimeters.
  • (B) Input: the side length of a square, in inches. Output: the perimeter of the square, in inches.
  • (C) Input: a positive number. Output: a number whose square is the input.
  • (D) Input: the price of a meal on a menu. Output: the name of a meal with that price.
AnswerB — Input: the side length of a square, in inches. Output: the perimeter of the square, in inches.
Step-by-step
  1. Ask: can one input ever have two different outputs?
  2. Side length → perimeter: a square with side s always has perimeter 4s, so each side length gives exactly one perimeter. This is a function.
  3. Age → height: two 13-year-olds can have different heights. Number → number whose square is the input: 9 → 3 and 9 → −3. Price → meal: two meals can both cost $8. None of these is a function.
Fast methodLook for one input that could lead to two outputs; if you cannot find one, it is a function.
Quick checkCheck: s = 5 gives perimeter 4 × 5 = 20, and no other perimeter is possible ✓.
Why the other choices are wrong
  • A (Input: a student's age, in years. Output: that student's height, in centimeters.): thought one age gives one height, but many students of the same age have different heights
  • C (Input: a positive number. Output: a number whose square is the input.): forgot that a positive number has two numbers that square to it, for example 9 → 3 and 9 → −3
  • D (Input: the price of a meal on a menu. Output: the name of a meal with that price.): assumed every price belongs to one meal, but two different meals can have the same price

Linear and Nonlinear Functions

A linear function has a constant rate of change, so its graph is a straight line and its equation can be written y = mx + b. The rate of change (slope) m is the change in y divided by the change in x; b is the initial value, the y-value when x = 0. In a table, check the rate between every pair of rows: if the x-values go up by different amounts, divide each change in y by its change in x. Functions such as A = s² (area of a square), A = πr² and y = 3/x are nonlinear: their rate of change is not constant and their graphs are curves. Traps: looking only at the y-values when the x-steps are uneven, calling any increasing table linear, and missing a hidden x² in an equation.

Key formulas
Linear functiony=mx+by=mx+b
Rate of change (slope)m=change in ychange in x=y2−y1x2−x1m=\dfrac{\text{change in }y}{\text{change in }x}=\dfrac{y_2-y_1}{x_2-x_1}
Initial valueb=y when x=0b=y\text{ when }x=0
Some nonlinear functionsA=s2,A=πr2,V=s3,y=3xA=s^2,\quad A=\pi r^2,\quad V=s^3,\quad y=\dfrac{3}{x}
Linear table testΔyΔx is the same for every pair of rows\dfrac{\Delta y}{\Delta x}\ \text{is the same for every pair of rows}

Recognizing a linear equation (8.F.A.3)

Method. Write the equation in the form y = mx + b; if that is impossible, the function is nonlinear.

Worked example. Which equation represents a linear function?

  • (A) y = x² + 1
  • (B) y = 3/x
  • (C) y = x³ − 2
  • (D) y = 4x − 7
AnswerD — y = 4x − 7
Step-by-step
  1. A linear function can be written y = mx + b, with x to the first power only.
  2. y = 4x − 7 has the form y = mx + b with m = 4 and b = −7, so it is linear.
  3. y = x² + 1 and y = x³ − 2 have powers of x greater than 1, and y = 3/x divides by x; their graphs are curves.
Fast methodLinear means x appears only to the first power, not squared, cubed or in a denominator.
Quick checkCheck: for y = 4x − 7, x = 0, 1, 2 give −7, −3, 1, which go up by 4 each time ✓.
Why the other choices are wrong
  • A (y = x² + 1): thought any equation with x and a constant is linear, missing the exponent 2
  • B (y = 3/x): thought dividing by x still gives a straight line
  • C (y = x³ − 2): read x³ as 3x

Deciding linear or nonlinear from a table (8.F.A.3)

Method. Compute the rate of change between consecutive rows; linear means every rate is the same.

Worked example. A table shows a function. When x = 0, y = 1. When x = 1, y = 3. When x = 2, y = 7. When x = 3, y = 13. Which statement is true?

  • (A) The function is linear, because the y-values increase every time.
  • (B) The function is nonlinear, because the y-values increase by 2, then 4, then 6.
  • (C) The function is linear, because the x-values increase by 1 each time.
  • (D) The function is nonlinear, because its graph does not pass through (0, 0).
AnswerB — The function is nonlinear, because the y-values increase by 2, then 4, then 6.
Step-by-step
  1. Each x-step is 1, so compare the changes in y.
  2. Changes in y: 3 − 1 = 2, 7 − 3 = 4, 13 − 7 = 6.
  3. The rate of change is not constant, so the function is nonlinear.
Fast methodEqual x-steps: the y-changes must all be equal for a linear function.
Quick checkCheck: the points (0, 1), (1, 3), (2, 7) are not on one line, because the slopes 2 and 4 differ ✓.
Why the other choices are wrong
  • A (The function is linear, because the y-values increase every time.): thought every increasing function is linear
  • C (The function is linear, because the x-values increase by 1 each time.): checked the x-values instead of the rate of change
  • D (The function is nonlinear, because its graph does not pass through (0, 0).): gave a wrong reason; a linear graph does not have to pass through the origin

Linear test with uneven x-steps (8.F.A.3)

Method. When the x-steps are uneven, compare Δy ÷ Δx, not the raw changes in y.

Worked example. A table shows a function. When x = 1, y = 5. When x = 3, y = 11. When x = 4, y = 14. When x = 7, y = 23. Which statement is true?

  • (A) The function is linear with a rate of change of 3.
  • (B) The function is nonlinear, because the y-values increase by 6, then 3, then 9.
  • (C) The function is linear with a rate of change of 6.
  • (D) The function is linear with a rate of change of 1/3.
AnswerA — The function is linear with a rate of change of 3.
Step-by-step
  1. The x-values go up by different amounts (2, 1, 3), so divide each change in y by its change in x.
  2. (11 − 5) ÷ (3 − 1) = 6 ÷ 2 = 3; (14 − 11) ÷ (4 − 3) = 3 ÷ 1 = 3; (23 − 14) ÷ (7 − 4) = 9 ÷ 3 = 3.
  3. Every rate is 3, so the function is linear with rate of change 3 (its equation is y = 3x + 2).
Fast methodUneven x-steps: always divide Δy by Δx before deciding.
Quick checkCheck: y = 3x + 2 gives 5, 11, 14, 23 for x = 1, 3, 4, 7 ✓.
Why the other choices are wrong
  • B (The function is nonlinear, because the y-values increase by 6, then 3, then 9.): looked only at the changes in y and ignored that the x-steps are 2, 1 and 3
  • C (The function is linear with a rate of change of 6.): used the first change in y, 11 − 5 = 6, without dividing by the change in x, 2
  • D (The function is linear with a rate of change of 1/3.): divided the change in x by the change in y: 2 ÷ 6 = 1/3

Building and Comparing Linear Models

To model a linear situation, find two numbers. The rate of change m is how much y changes for each 1-unit increase in x (a cost per hour, a speed, a drop per minute). The initial value b is the starting amount, the value of y when x = 0 (a sign-up fee, a starting height). Read them from a description, from two points, from a table or from a graph, then write y = mx + b. When the data start at an x other than 0, work backward to x = 0 to find b. To compare two functions shown in different ways (an equation, a table, a description), find m and b for each and compare like with like. Traps: swapping m and b, using the first y-value in a table as the initial value when x is not 0, forgetting to divide by the change in x, and dropping a negative sign.

Key formulas
Linear modely=mx+by=mx+b
Rate from two pointsm=y2−y1x2−x1m=\dfrac{y_2-y_1}{x_2-x_1}
Initial value from a pointb=y1−m x1b=y_1-m\,x_1
Meaning in contextm=change per unit,b=starting amountm=\text{change per unit},\quad b=\text{starting amount}
Decreasing modelm<0 ⇒ y goes down as x goes upm<0\ \Rightarrow\ y\text{ goes down as }x\text{ goes up}

Writing a model from a description (8.F.B.4)

Method. Rate of change = amount per unit (multiplies x); initial value = one-time or starting amount.

Worked example. A plumber charges a $45 fee for each visit plus $30 for each hour of work. Which equation gives the total cost y, in dollars, for a visit of x hours?

  • (A) y = 45x + 30
  • (B) y = 75x
  • (C) y = 30x − 45
  • (D) y = 30x + 45
AnswerD — y = 30x + 45
Step-by-step
  1. The amount that changes with each hour is $30, so the rate of change is m = 30.
  2. The $45 is charged once no matter how long the job takes, so the initial value is b = 45.
  3. The model is y = 30x + 45.
Fast methodPer-unit charge goes with x; the one-time charge stands alone.
Quick checkCheck: a 2-hour visit costs 30 × 2 + 45 = $105, which is $45 + $30 + $30 ✓.
Why the other choices are wrong
  • A (y = 45x + 30): swapped the rate (per hour) and the initial value (one-time fee)
  • B (y = 75x): added the fee and the hourly charge into one rate: 45 + 30 = 75
  • C (y = 30x − 45): subtracted the fee instead of adding it

Initial value from two data points (8.F.B.4)

Method. Find m from two points, then b = y₁ − m·x₁ (work back to x = 0).

Worked example. A candle burns at a constant rate. It is 18 centimeters tall after it has burned for 2 hours and 12 centimeters tall after it has burned for 5 hours. How tall was the candle before it was lit?

  • (A) 18 centimeters
  • (B) 20 centimeters
  • (C) 22 centimeters
  • (D) 14 centimeters
AnswerC — 22 centimeters
Step-by-step
  1. Rate of change: (12 − 18) ÷ (5 − 2) = −6 ÷ 3 = −2 centimeters per hour.
  2. Go back 2 hours from the first data point: the candle was 2 × 2 = 4 centimeters taller.
  3. Initial height: 18 + 4 = 22 centimeters. The model is y = −2x + 22.
Fast methodFind the rate, then undo it for the hours already burned.
Quick checkCheck: y = −2(5) + 22 = 12 ✓ and y = −2(2) + 22 = 18 ✓.
Why the other choices are wrong
  • A (18 centimeters): used the first height given as the initial value, but that was after 2 hours
  • B (20 centimeters): added back only one hour of burning: 18 + 2 = 20
  • D (14 centimeters): moved the wrong way from x = 2 to x = 0: 18 − 2 × 2 = 14

Comparing an equation with a table (8.F.A.2)

Method. To compare functions in different forms, find the rate and the initial value of each and compare them directly.

Worked example. Function A is given by the equation y = 4x + 3. Function B is given by a table: when x = 2, y = 5; when x = 4, y = 13; when x = 6, y = 21. Both functions are linear. Which statement is true?

  • (A) Function B has the greater rate of change, because its y-values go up by 8.
  • (B) The functions have the same rate of change, but Function A has the greater initial value.
  • (C) The functions have the same rate of change and the same initial value.
  • (D) Function B has the greater initial value, because its first y-value, 5, is greater than 3.
AnswerB — The functions have the same rate of change, but Function A has the greater initial value.
Step-by-step
  1. Function A: m = 4, b = 3.
  2. Function B: m = (13 − 5) ÷ (4 − 2) = 8 ÷ 2 = 4. Work back from (2, 5): b = 5 − 4 × 2 = −3.
  3. Both rates are 4. Initial values: 3 > −3, so Function A has the greater initial value.
Fast methodPut both functions in y = mx + b form, then compare m with m and b with b.
Quick checkCheck: y = 4x − 3 gives 5, 13, 21 for x = 2, 4, 6 ✓.
Why the other choices are wrong
  • A (Function B has the greater rate of change, because its y-values go up by 8.): used the change in y, 8, without dividing by the change in x, 2
  • C (The functions have the same rate of change and the same initial value.): assumed equal rates mean the lines are the same, without finding B's initial value
  • D (Function B has the greater initial value, because its first y-value, 5, is greater than 3.): used the first table value as the initial value, but it is the value at x = 2, not x = 0

Describing and Sketching Graphs

A qualitative graph shows how one quantity changes with another without exact numbers. Read it piece by piece: a rising piece means increasing, a falling piece means decreasing, a horizontal piece means no change (for example, stopped or holding steady). A straight piece means a constant rate; a steeper piece means a faster rate; a curve means the rate is changing (a curve that flattens out means the change is slowing down). To sketch a graph from a story, list the events in order and decide for each one: up, down or flat; steady or speeding up or slowing down. Traps: reading a distance-time graph as a picture of a path, thinking a horizontal piece means moving at a steady speed, and comparing the total change of two pieces instead of their rates.

Key formulas
Rate on a piecerate=change in outputchange in input\text{rate}=\dfrac{\text{change in output}}{\text{change in input}}
Increasing / decreasingrate>0 rises,rate<0 falls\text{rate}>0\ \text{rises},\quad \text{rate}<0\ \text{falls}
Constantrate=0 ⇒ horizontal piece\text{rate}=0\ \Rightarrow\ \text{horizontal piece}
Speed on a distance-time graphspeed=distancetime\text{speed}=\dfrac{\text{distance}}{\text{time}}

Story to graph (8.F.B.5)

Method. Match each event in the story, in order, with up, down or flat and with steady or changing steepness.

Worked example. Maria walks from home to school at a steady pace. On the way she stops at a store for 5 minutes, then keeps walking to school at the same steady pace. A graph shows her distance from home (output) against time (input). Which description fits the graph?

  • (A) A straight piece rising, then a horizontal piece, then a straight piece falling
  • (B) A straight piece rising, then a straight piece falling to zero, then a straight piece rising
  • (C) One curved piece that rises faster and faster
  • (D) A straight piece rising, then a horizontal piece, then a straight piece rising with the same steepness as the first
AnswerD — A straight piece rising, then a horizontal piece, then a straight piece rising with the same steepness as the first
Step-by-step
  1. Steady walking away from home: distance increases at a constant rate, a rising straight piece.
  2. Stopped at the store: distance from home does not change, a horizontal piece.
  3. Walking on at the same pace: a rising straight piece with the same steepness as the first.
Fast methodMoving away = up, stopped = flat, same pace = same steepness.
Quick checkCheck: the graph never falls, because Maria never walks toward home ✓.
Why the other choices are wrong
  • A (A straight piece rising, then a horizontal piece, then a straight piece falling): thought walking on after the stop takes her back toward home
  • B (A straight piece rising, then a straight piece falling to zero, then a straight piece rising): thought stopping makes the distance from home go back to zero
  • C (One curved piece that rises faster and faster): ignored the stop and the steady pace

Graph to story (8.F.B.5)

Method. Read a graph from left to right and translate each piece into what is happening.

Worked example. A graph shows the height of the water in a bathtub (output) against time (input). The graph rises in a straight line, then stays horizontal, then falls in a straight line until the height is 0. Which story matches the graph?

  • (A) The tub drains, sits empty, and then is filled from the faucet.
  • (B) The tub is filled, the faucet is turned up to fill it faster, and then the tub drains.
  • (C) The tub is filled from the faucet at a steady rate, the water is turned off and the tub sits, and then the plug is pulled and the tub drains completely.
  • (D) The tub is filled, the plug is pulled, and the tub drains completely while the faucet stays on.
AnswerC — The tub is filled from the faucet at a steady rate, the water is turned off and the tub sits, and then the plug is pulled and the tub drains completely.
Step-by-step
  1. Rising straight piece: the height increases at a steady rate, so water is flowing in.
  2. Horizontal piece: the height does not change, so no water flows in or out.
  3. Falling to 0: the height decreases until the tub is empty, so it drains completely.
Fast methodRead left to right: up, flat, down to zero.
Quick checkCheck: the story has exactly three stages, in the same order as the three pieces ✓.
Why the other choices are wrong
  • A (The tub drains, sits empty, and then is filled from the faucet.): read the graph from right to left
  • B (The tub is filled, the faucet is turned up to fill it faster, and then the tub drains.): thought a horizontal piece means the water is still rising
  • D (The tub is filled, the plug is pulled, and the tub drains completely while the faucet stays on.): ignored the horizontal piece in the middle

Comparing rates on a piecewise graph (8.F.B.5)

Method. Compute the rate on each piece; compare rates, not total changes.

Worked example. The graph of a function is made of three straight pieces. The first goes from (0, 2) to (3, 8). The second goes from (3, 8) to (6, 8). The third goes from (6, 8) to (10, 0). Which statement is true?

  • (A) The function increases at a rate of 2 on the first piece and decreases at a rate of 2 on the third piece.
  • (B) The function decreases faster than it increases, because it falls 8 units but rises only 6 units.
  • (C) The function is increasing for all x from 0 to 6.
  • (D) The function increases at a rate of 6 on the first piece.
AnswerA — The function increases at a rate of 2 on the first piece and decreases at a rate of 2 on the third piece.
Step-by-step
  1. First piece: rate = (8 − 2) ÷ (3 − 0) = 6 ÷ 3 = 2 (increasing).
  2. Second piece: rate = (8 − 8) ÷ (6 − 3) = 0 (constant).
  3. Third piece: rate = (0 − 8) ÷ (10 − 6) = −8 ÷ 4 = −2 (decreasing at a rate of 2). The rise and the fall have the same steepness.
Fast methodSteepness is change in y ÷ change in x on each piece, not the size of the change.
Quick checkCheck: the first piece rises 6 over 3 units and the third falls 8 over 4 units; 6/3 = 8/4 = 2 ✓.
Why the other choices are wrong
  • B (The function decreases faster than it increases, because it falls 8 units but rises only 6 units.): compared the total changes, 8 and 6, instead of the rates, 8 ÷ 4 and 6 ÷ 3
  • C (The function is increasing for all x from 0 to 6.): counted the horizontal piece as increasing
  • D (The function increases at a rate of 6 on the first piece.): used the change in y, 8 − 2 = 6, without dividing by the change in x, 3

06.03 Geometry and Statistics (Grade 8)

This topic covers grade 8 Geometry (transformations, congruence and similarity; angle relationships in triangles and with parallel lines; the Pythagorean theorem and its converse, including distance on the coordinate plane; and the volume of cylinders, cones and spheres) and Statistics (scatter plots, lines of fit and two-way tables); together these are about 40% of the grade 8 MCAS. The real grade 8 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ hours each) with 40 scored items, including 4 constructed-response questions; Session 1 does not allow a calculator and Session 2 allows a scientific calculator, a TI graphing calculator or the Desmos graphing calculator, and you get the grade 8 reference sheet (including the Pythagorean theorem and the volumes of a cylinder, cone and sphere). On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; all others should be done without one. The real test has no time limit; aim for about 3 minutes per question as a practice target.

Transformations, Congruence and Similarity

Translations, reflections and rotations are rigid motions: they move a figure without changing any length or angle measure, so the image is congruent to the original, and lines stay lines and parallel lines stay parallel. A dilation multiplies every distance from the center by the scale factor k; the image is similar, with the same angles, lengths multiplied by k and area multiplied by k². On the coordinate plane, learn the rules for each move and test every vertex. Common traps: mixing up the x-axis and the y-axis in a reflection, turning clockwise when the problem says counterclockwise, doing a sequence of moves out of order, and multiplying area by k instead of k².

Key formulas
Translation by a right and b up(x,y)→(x+a, y+b)(x,y)\to(x+a,\,y+b)
Reflections across the x-axis and the y-axis(x,y)→(x,−y)(x,y)→(−x,y)(x,y)\to(x,-y)\qquad (x,y)\to(-x,y)
Rotations about the origin (90° counterclockwise, 180°, 90° clockwise)(x,y)→(−y,x)(x,y)→(−x,−y)(x,y)→(y,−x)(x,y)\to(-y,x)\qquad (x,y)\to(-x,-y)\qquad (x,y)\to(y,-x)
Dilation with scale factor k, center at the origin(x,y)→(kx, ky)(x,y)\to(kx,\,ky)
Similar figures: lengths and areasnew length=k×old length,new area=k2×old area\text{new length}=k\times\text{old length},\quad \text{new area}=k^{2}\times\text{old area}

Reflecting a point across the x-axis (8.G.A.3)

Method. A reflection across the x-axis maps (x, y) to (x, −y); across the y-axis it maps (x, y) to (−x, y).

Worked example. Point P is at (3, −5) on a coordinate plane. Point P is reflected across the x-axis to form point P′. What are the coordinates of P′?

  • (A) (3, 5)
  • (B) (−3, −5)
  • (C) (−3, 5)
  • (D) (−5, 3)
AnswerA — (3, 5)
Step-by-step
  1. A reflection across the x-axis keeps the x-coordinate and changes the sign of the y-coordinate: (x, y) → (x, −y).
  2. So (3, −5) → (3, 5).
Fast methodAcross the x-axis: same x, opposite y.
Quick checkCheck: P (3, −5) is 5 units below the x-axis and P′ (3, 5) is 5 units above it, on the same vertical line ✓.
Why the other choices are wrong
  • B ((−3, −5)): reflected across the y-axis, which changes the sign of the x-coordinate
  • C ((−3, 5)): changed the signs of both coordinates, which is a 180° rotation
  • D ((−5, 3)): switched the two coordinates instead of reflecting

Rotating a figure 90° counterclockwise (8.G.A.3)

Method. Rotations about the origin: 90° counterclockwise (x, y) → (−y, x); 180° (x, y) → (−x, −y); 90° clockwise (x, y) → (y, −x).

Worked example. Triangle ABC has vertices A(2, 1), B(5, 1) and C(2, 4). The triangle is rotated 90° counterclockwise about the origin to form triangle A′B′C′. What are the coordinates of B′?

  • (A) (1, −5)
  • (B) (−5, −1)
  • (C) (−1, 5)
  • (D) (−5, 1)
AnswerC — (−1, 5)
Step-by-step
  1. A 90° counterclockwise rotation about the origin uses the rule (x, y) → (−y, x).
  2. For B(5, 1): the new x-coordinate is −1 and the new y-coordinate is 5, so B′ is (−1, 5).
Fast method90° counterclockwise: swap the coordinates, then make the new first coordinate its opposite.
Quick checkCheck: B(5, 1) is in Quadrant I; a quarter turn counterclockwise moves it to Quadrant II, and (−1, 5) is in Quadrant II ✓.
Why the other choices are wrong
  • A ((1, −5)): rotated 90° clockwise, using (x, y) → (y, −x)
  • B ((−5, −1)): rotated 180°, using (x, y) → (−x, −y)
  • D ((−5, 1)): reflected across the y-axis instead of rotating

Dilation and area (8.G.A.3, 8.G.A.4)

Method. Under a dilation with scale factor k, every length is multiplied by k and the area is multiplied by k².

Worked example. A rectangle has vertices at (0, 0), (4, 0), (4, 6) and (0, 6). It is dilated by a scale factor of 1.5 with the center of dilation at the origin. What is the area of the image, in square units?

  • (A) 36
  • (B) 54
  • (C) 24
  • (D) 30
AnswerB — 54
Step-by-step
  1. Part A: The original rectangle is 4 units by 6 units.
  2. Part B: Multiply each side by 1.5: the image is 6 units by 9 units.
  3. Part C: Area of the image = 6 × 9 = 54 square units.
Fast methodAreas scale by the square of the scale factor: 24 × 1.5² = 24 × 2.25 = 54.
Quick checkCheck: 54 ÷ 24 = 2.25 = 1.5² ✓.
Why the other choices are wrong
  • A (36): multiplied the area by the scale factor once instead of by its square
  • C (24): thought a dilation keeps the area the same
  • D (30): found the perimeter of the image (2 × (6 + 9)) instead of its area

Angle Relationships and the Pythagorean Theorem

The angles of a triangle add to 180°, and an exterior angle equals the sum of the two interior angles that are not next to it. When parallel lines are cut by a transversal, corresponding and alternate interior angles are equal and same-side interior angles add to 180°; vertical angles are always equal. Two triangles with two pairs of equal angles are similar (AA). In a right triangle, a² + b² = c², where c is the hypotenuse across from the right angle; the converse says that if a² + b² = c², the triangle is a right triangle. Use it to find a missing side, the diagonal of a box, or the distance between two points on a coordinate plane. Common traps: adding the sides instead of their squares, treating the hypotenuse as a leg, and forgetting the square root.

Key formulas
Triangle angle sum∠A+∠B+∠C=180∘\angle A+\angle B+\angle C=180^\circ
Exterior angleexterior angle=sum of the two remote interior angles\text{exterior angle}=\text{sum of the two remote interior angles}
Parallel lines cut by a transversalalternate interior angles are equal; same-side interior angles add to 180∘\text{alternate interior angles are equal};\ \text{same-side interior angles add to }180^\circ
Pythagorean theorem (on the grade 8 reference sheet)a2+b2=c2a^{2}+b^{2}=c^{2}
Distance between two points (Pythagorean theorem: the legs are the horizontal and vertical distances)d2=(horizontal distance)2+(vertical distance)2d^{2}=(\text{horizontal distance})^{2}+(\text{vertical distance})^{2}

Triangle angle sum (8.G.A.5)

Method. The angles of any triangle add to 180°.

Worked example. Two angles of a triangle measure 48° and 67°. What is the measure of the third angle?

  • (A) 115°
  • (B) 245°
  • (C) 132°
  • (D) 65°
AnswerD — 65°
Step-by-step
  1. The three angles of a triangle add to 180°.
  2. 48° + 67° = 115°.
  3. 180° − 115° = 65°.
Fast method180 minus the sum of the two known angles.
Quick checkCheck: 48 + 67 + 65 = 180 ✓.
Why the other choices are wrong
  • A (115°): added the two given angles; that sum is the exterior angle at the third vertex
  • B (245°): subtracted from 360° instead of 180°
  • C (132°): subtracted only one of the given angles from 180°

Pythagorean theorem: finding a leg (8.G.B.7)

Method. In a right triangle with legs a and b and hypotenuse c, a² + b² = c²; to find a leg, subtract: a² = c² − b².

Worked example. A 13-foot ladder leans against a vertical wall. The bottom of the ladder is 5 feet from the base of the wall on level ground. How high up the wall does the top of the ladder reach?

  • (A) about 13.9 feet
  • (B) 12 feet
  • (C) 8 feet
  • (D) 18 feet
AnswerB — 12 feet
Step-by-step
  1. The wall, the ground and the ladder form a right triangle. The ladder (13 ft) is the hypotenuse.
  2. Let h be the height: h² + 5² = 13², so h² + 25 = 169.
  3. h² = 144, so h = 12 feet.
Fast methodLeg² = hypotenuse² − other leg² = 169 − 25 = 144.
Quick checkCheck: 5² + 12² = 25 + 144 = 169 = 13² ✓.
Why the other choices are wrong
  • A (about 13.9 feet): added the squares (13² + 5²) even though 13 is the hypotenuse
  • C (8 feet): subtracted the lengths instead of their squares
  • D (18 feet): added the two lengths

Pythagorean theorem in three dimensions (8.G.B.7)

Method. For a diagonal through a box, use the Pythagorean theorem twice: first across the base, then up to the opposite corner.

Worked example. A box shaped like a right rectangular prism is 12 inches long, 4 inches wide and 3 inches tall. What is the length of the longest straight rod that fits inside the box, from one bottom corner to the opposite top corner?

  • (A) 13 inches
  • (B) about 12.6 inches
  • (C) 19 inches
  • (D) 169 inches
AnswerA — 13 inches
Step-by-step
  1. Part A: Diagonal of the bottom: d² = 12² + 4² = 144 + 16 = 160.
  2. Part B: The rod is the hypotenuse of a right triangle with legs d and the height 3: rod² = 160 + 3² = 169.
  3. Part C: rod = √169 = 13 inches.
Fast methodRod² = length² + width² + height² = 144 + 16 + 9 = 169.
Quick checkCheck: 13 > 12, the longest edge, as it must be ✓.
Why the other choices are wrong
  • B (about 12.6 inches): found only the diagonal of the bottom of the box (√(12² + 4²))
  • C (19 inches): added the three edge lengths
  • D (169 inches): forgot to take the square root at the end

Volume of Cylinders, Cones and Spheres

The grade 8 reference sheet gives the volume formulas for a cylinder, a cone and a sphere, but you must know which measurement goes where. A cone holds one third as much as a cylinder with the same base and height, and a hemisphere is half of a sphere. Answers may be left in terms of π or rounded using the π key. Common traps: using the diameter where the formula needs the radius, squaring instead of cubing the radius of a sphere, forgetting the 1/3 for a cone, and using a cone's slant height as its height.

Key formulas
CylinderV=πr2hV=\pi r^{2}h
ConeV=13πr2hV=\tfrac{1}{3}\pi r^{2}h
SphereV=43πr3V=\tfrac{4}{3}\pi r^{3}
HemisphereV=12⋅43πr3=23πr3V=\tfrac{1}{2}\cdot\tfrac{4}{3}\pi r^{3}=\tfrac{2}{3}\pi r^{3}
Radius and diameterr=d2r=\tfrac{d}{2}

Volume of a cylinder (8.G.C.9)

Method. The volume of a cylinder is V = πr²h: the area of the circular base times the height.

Worked example. A cylinder has a radius of 3 centimeters and a height of 5 centimeters. What is the volume of the cylinder?

  • (A) 15π cubic centimeters
  • (B) 30π cubic centimeters
  • (C) 45π cubic centimeters
  • (D) 75π cubic centimeters
AnswerC — 45π cubic centimeters
Step-by-step
  1. V = πr²h.
  2. r² = 3² = 9.
  3. V = π × 9 × 5 = 45π cubic centimeters.
Fast methodSquare the radius, multiply by the height, keep π.
Quick checkCheck: 45π ≈ 141 cm³, a little less than a 6 × 6 × 5 box (180 cm³) that would hold the cylinder ✓.
Why the other choices are wrong
  • A (15π cubic centimeters): multiplied by the radius instead of the radius squared
  • B (30π cubic centimeters): used 2πrh, which is the area of the curved side, not the volume
  • D (75π cubic centimeters): switched the radius and the height

Volume of a cone (8.G.C.9)

Method. The volume of a cone is V = (1/3)πr²h, one third of the cylinder with the same base and height.

Worked example. A cone has a radius of 6 inches and a height of 10 inches. What is the volume of the cone?

  • (A) 360π cubic inches
  • (B) 20π cubic inches
  • (C) 480π cubic inches
  • (D) 120π cubic inches
AnswerD — 120π cubic inches
Step-by-step
  1. V = (1/3)πr²h.
  2. r² = 6² = 36.
  3. V = (1/3) × π × 36 × 10 = (1/3) × 360π = 120π cubic inches.
Fast methodA cone is 1/3 of the cylinder with the same base and height: 360π ÷ 3.
Quick checkCheck: 120π × 3 = 360π = π × 36 × 10, the matching cylinder ✓.
Why the other choices are wrong
  • A (360π cubic inches): forgot the 1/3 and found the volume of a cylinder
  • B (20π cubic inches): multiplied by the radius instead of the radius squared
  • C (480π cubic inches): used the diameter, 12, in place of the radius

Volume of a sphere and a cylinder combined (8.G.C.9)

Method. For a space between two solids, find each volume with its own formula and subtract.

Worked example. A ball shaped like a sphere has a diameter of 6 inches. It is packed in a cylinder-shaped can with a radius of 3 inches and a height of 6 inches. How much space inside the can is NOT filled by the ball?

  • (A) 18π cubic inches
  • (B) 27π cubic inches
  • (C) 45π cubic inches
  • (D) 90π cubic inches
AnswerA — 18π cubic inches
Step-by-step
  1. Part A: Can: V = πr²h = π × 3² × 6 = 54π cubic inches.
  2. Part B: Ball: the radius is 6 ÷ 2 = 3 inches, so V = (4/3)πr³ = (4/3) × π × 27 = 36π cubic inches.
  3. Part C: Empty space = 54π − 36π = 18π cubic inches.
Fast methodCan minus ball: 54π − 36π.
Quick checkCheck: 36π + 18π = 54π, the can's volume ✓.
Why the other choices are wrong
  • B (27π cubic inches): used πr³ for the sphere, leaving out the 4/3
  • C (45π cubic inches): used 1/3 instead of 4/3 in the sphere formula
  • D (90π cubic inches): added the two volumes instead of subtracting

Scatter Plots, Lines of Fit and Two-Way Tables

A scatter plot shows pairs of numbers as points. Describe the pattern: positive or negative association, linear or nonlinear, clusters, and outliers far from the pattern. A line of fit is drawn close to most points; in y = mx + b the slope m is the change in y for each 1-unit increase in x and b is the value of y when x = 0, and you can use the line to make predictions. A two-way table counts two categories at once; a relative frequency divides a count by the total of the group the question names. To decide whether two categories are associated, compare the row (or column) percents, not the raw counts. Common traps: mixing up slope and intercept, and dividing by the wrong total.

Key formulas
Slope of a line through two pointsm=y2−y1x2−x1m=\dfrac{y_2-y_1}{x_2-x_1}
Linear modely=mx+b(m=rate of change, b=initial value)y=mx+b\quad(m=\text{rate of change},\ b=\text{initial value})
Relative frequencyrelative frequency=count in a celltotal of the row or column named\text{relative frequency}=\dfrac{\text{count in a cell}}{\text{total of the row or column named}}
Evidence of associationrow percents differ a lot ⇒ association\text{row percents differ a lot}\ \Rightarrow\ \text{association}

Describing association in a scatter plot (8.SP.A.1)

Method. Positive association: both variables increase together; negative: one increases as the other decreases; linear: points lie close to a line.

Worked example. A coach records each player's hours of practice and number of errors in a game. The data points (hours, errors) are (1, 18), (2, 15), (3, 13), (4, 10), (5, 8) and (6, 5). Which best describes the association in a scatter plot of these data?

  • (A) positive linear association
  • (B) negative linear association
  • (C) no association
  • (D) nonlinear association
AnswerB — negative linear association
Step-by-step
  1. As hours go up by 1, errors go down each time (by 2 or 3).
  2. The points fall close to a straight line that slopes down.
  3. So the association is negative and linear.
Fast methodOne variable goes up while the other goes down → negative.
Quick checkCheck: the first point (1, 18) is higher than the last point (6, 5) ✓.
Why the other choices are wrong
  • A (positive linear association): thought the points rising in hours meant the association is positive, though errors go down
  • C (no association): did not see the steady pattern in the points
  • D (nonlinear association): thought the uneven drops (3, 2, 3, 2, 3) make the pattern curved

Interpreting the slope of a line of fit (8.SP.A.3)

Method. In a linear model y = mx + b, m is the rate of change (y-units per x-unit) and b is the value of y when x = 0.

Worked example. A line of fit for data on a plant's height is y = 2.5x + 12, where x is the number of weeks after the study began and y is the height in centimeters. What does the slope of the line mean?

  • (A) The plant was about 12 centimeters tall when the study began.
  • (B) The plant grows about 12 centimeters each week.
  • (C) The plant takes about 2.5 weeks to grow 1 centimeter.
  • (D) The plant grows about 2.5 centimeters each week.
AnswerD — The plant grows about 2.5 centimeters each week.
Step-by-step
  1. In y = mx + b, the slope m is the change in y for each increase of 1 in x.
  2. Here m = 2.5, y is in centimeters and x is in weeks.
  3. So the height increases about 2.5 cm for each week.
Fast methodSlope = units of y per one unit of x.
Quick checkCheck: from week 2 (y = 17) to week 3 (y = 19.5), the height goes up 2.5 cm ✓.
Why the other choices are wrong
  • A (The plant was about 12 centimeters tall when the study began.): described the y-intercept instead of the slope
  • B (The plant grows about 12 centimeters each week.): switched the slope and the y-intercept
  • C (The plant takes about 2.5 weeks to grow 1 centimeter.): turned the rate upside down (weeks per centimeter)

Relative frequency in a two-way table (8.SP.A.4)

Method. A relative frequency is a count divided by the total of the group named in the question (a row or column total).

Worked example. A school surveyed 100 students. Of the 40 students who have a weekday curfew, 30 do chores at home. Of the 60 students who do not have a curfew, 20 do chores at home. What percent of the students who do chores have a curfew?

  • (A) 75%
  • (B) 30%
  • (C) 60%
  • (D) 40%
AnswerC — 60%
Step-by-step
  1. Part A: Students who do chores: 30 + 20 = 50.
  2. Part B: Of those 50, 30 have a curfew.
  3. Part C: 30 ÷ 50 = 0.6 = 60%.
Fast methodThe group after “of the students who …” is the denominator: 50.
Quick checkCheck: 20 of the 50 chore-doers have no curfew: 40%, and 60% + 40% = 100% ✓.
Why the other choices are wrong
  • A (75%): divided by the number with a curfew (30 ÷ 40) instead of the number who do chores
  • B (30%): divided by all 100 students
  • D (40%): found the percent of all students who have a curfew