This topic covers the grade 10 MCAS function standards: function notation, domain and range, rate of change, key features of linear, quadratic, piecewise, step, absolute value and exponential graphs, building functions and sequences, transformations, inverses of linear functions, and linear versus exponential models. Algebra and Functions together make up about 35% of the points on the grade 10 MCAS, and this functions part is about 15%. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions worth 4 points each. Session 1 allows no calculator; Session 2 allows a scientific or graphing calculator (TI or Desmos), and you have the grade 10 reference sheet. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; all others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.
Functions, Notation, Domain and Rate of Change
A function gives exactly one output for each input. In f(x), x is the input and f(x) is the output, so f(3) = 10 means the input 3 gives the output 10. To evaluate, put the input in parentheses everywhere x appears; to solve f(x) = c, find the input that gives c. In a real situation, the domain is only the inputs that make sense (whole numbers for counted things, times from start to finish). The average rate of change over an interval is the change in output divided by the change in input. Common traps: swapping input and output, squaring a negative without parentheses, giving the range when the domain is asked, and forgetting to divide by the change in x.
Key formulas| Function | each input x ↦ exactly one output f(x) |
| Function notation | f(a)=b⟺(a,b) is on the graph of f |
| Domain and range | domain={inputs},range={outputs} |
| Average rate of change | b−af(b)−f(a) |
Identifying a function
Method. A relation is a function when every input has exactly one output; repeated outputs are allowed.
Worked example. Which set of ordered pairs represents y as a function of x?
- (A) {(1, 4), (2, 4), (3, 6), (5, 6)}
- (B) {(1, 4), (1, 5), (2, 6), (3, 7)}
- (C) {(4, 1), (4, 2), (5, 3), (6, 4)}
- (D) {(2, 3), (3, 2), (2, 5), (5, 2)}
AnswerA — {(1, 4), (2, 4), (3, 6), (5, 6)}
Step-by-step- A function gives exactly one output for each input, so no x-value may appear with two different y-values.
- In {(1, 4), (2, 4), (3, 6), (5, 6)} the inputs 1, 2, 3 and 5 each appear once. Outputs may repeat.
- Each of the other sets has an input that is paired with two different outputs.
Fast methodScan the first numbers only: a repeated x with a different y means not a function.
Quick checkCheck: inputs 1, 2, 3, 5 are all different ✓.
Why the other choices are wrong- B ({(1, 4), (1, 5), (2, 6), (3, 7)}): checked only that the outputs are all different and missed that the input 1 appears with two outputs
- C ({(4, 1), (4, 2), (5, 3), (6, 4)}): checked the y-values instead of the x-values; the input 4 has two outputs
- D ({(2, 3), (3, 2), (2, 5), (5, 2)}): thought a set is a function when no pair repeats exactly; the input 2 has outputs 3 and 5
Evaluating function notation
Method. To evaluate f(a), substitute a in parentheses for every x and follow the order of operations.
Worked example. The function f is defined by f(x) = 2x² − 3x + 1. What is the value of f(−2)?
AnswerB — 15
Step-by-step- Replace every x with (−2): f(−2) = 2(−2)² − 3(−2) + 1.
- (−2)² = 4, so 2(4) = 8; and −3(−2) = 6.
- f(−2) = 8 + 6 + 1 = 15.
Fast methodPut the input in parentheses before squaring.
Quick checkCheck: 2(4) = 8, −3(−2) = +6, 8 + 6 + 1 = 15 ✓.
Why the other choices are wrong- A (−1): squared −2 as −4, so 2(−4) + 6 + 1 = −1
- C (3): multiplied −3 by −2 and got −6, so 8 − 6 + 1 = 3
- D (23): squared 2x instead of x: (2 × −2)² = 16, so 16 + 6 + 1 = 23
Average rate of change in context
Method. Average rate of change from a to b is (f(b) − f(a)) ÷ (b − a), in output units per input unit.
Worked example. The height, in feet, of a ball t seconds after it is thrown upward is h(t) = −16t² + 64t + 5. What is the average rate of change of h from t = 0 to t = 2, in feet per second?
- (A) 34.5
- (B) 64
- (C) 32
- (D) 37
AnswerC — 32
Step-by-step- Find the heights: h(0) = 5 and h(2) = −16(4) + 64(2) + 5 = −64 + 128 + 5 = 69.
- Average rate of change = (h(2) − h(0)) ÷ (2 − 0) = (69 − 5) ÷ 2.
- 64 ÷ 2 = 32 feet per second: on average the ball rises 32 feet each second over the first 2 seconds.
Fast methodChange in output over change in input: (69 − 5) ÷ 2.
Quick checkCheck: 5 + 32 × 2 = 69 = h(2) ✓.
Why the other choices are wrong- A (34.5): divided h(2) = 69 by 2 without subtracting h(0) = 5
- B (64): found the change in height, 69 − 5 = 64, but did not divide by the change in time
- D (37): averaged the two heights, (69 + 5) ÷ 2, instead of finding the change per second
Different forms of a function show different features. Factored form a(x − p)(x − q) shows the zeros p and q. Vertex form a(x − h)² + k, found by completing the square, shows the vertex (h, k): a minimum when a > 0 and a maximum when a < 0. Piecewise functions use different rules on different intervals, so check which interval the input is in first. Step functions jump (for example, a charge for each hour or part of an hour), and the graph of a|x − h| + k is a V with vertex (h, k). For exponential functions a(b)x + k, the y-intercept is a + k, the horizontal asymptote is y = k, b > 1 means growth and 0 < b < 1 means decay; rewrite bt/2 or b−x to read the real rate. Compare two functions given in different ways by finding the same feature for each.
Key formulas| Factored form | f(x)=a(x−p)(x−q) ⇒ zeros x=p, x=q |
| Vertex | x=−2ab,f(x)=a(x−h)2+k ⇒ vertex (h,k) |
| Completing the square | x2+bx+c=(x+2b)2+c−(2b)2 |
| Absolute value graph | y=a∣x−h∣+k: vertex (h,k) |
| Exponential growth and decay | y=a(1+r)t (growth),y=a(1−r)t (decay) |
Zeros from factored form
Method. In factored form f(x) = a(x − p)(x − q), the zeros are x = p and x = q.
Worked example. What are the zeros of the function f(x) = (x + 4)(x − 2)?
- (A) x = 4 and x = −2
- (B) x = −8 only
- (C) x = 2 only
- (D) x = −4 and x = 2
AnswerD — x = −4 and x = 2
Step-by-step- A zero is an x-value that makes f(x) = 0.
- A product is 0 when a factor is 0: x + 4 = 0 or x − 2 = 0.
- So x = −4 or x = 2.
Fast methodSet each factor to zero and solve.
Quick checkCheck: f(−4) = 0 × (−6) = 0 and f(2) = 6 × 0 = 0 ✓.
Why the other choices are wrong- A (x = 4 and x = −2): used the numbers in the factors without changing their signs
- B (x = −8 only): found f(0) = −8, which is the y-intercept, not a zero
- C (x = 2 only): set only one factor equal to zero
Completing the square to find a minimum
Method. Complete the square to write a(x − h)² + k; for a > 0 the minimum value is k, at x = h.
Worked example. The function f is defined by f(x) = x² − 6x + 11. What is the minimum value of f?
AnswerB — 2
Step-by-step- Complete the square: half of −6 is −3, and (−3)² = 9.
- x² − 6x + 11 = (x² − 6x + 9) − 9 + 11 = (x − 3)² + 2.
- (x − 3)² is never negative, so its smallest value is 0, at x = 3. The minimum value of f is 0 + 2 = 2.
Fast methodVertex form (x − h)² + k shows the minimum k.
Quick checkCheck: f(3) = 9 − 18 + 11 = 2 ✓.
Why the other choices are wrong- A (3): gave the x-value of the vertex, x = 3, instead of the minimum value
- C (11): gave the y-intercept f(0) = 11 instead of the minimum
- D (20): added 9 instead of subtracting it when completing the square: (x − 3)² + 20
Rewriting an exponential expression
Method. Use exponent properties to rewrite bt/k as (b1/k)t; a factor 1 + r per year means r growth per year.
Worked example. The population of a town t years from now is modeled by P(t) = 800(1.44)t/2. By what percent does the population grow each year?
- (A) 44%
- (B) 22%
- (C) 20%
- (D) 72%
AnswerC — 20%
Step-by-step- (1.44)t/2 = ((1.44)1/2)t, and the square root of 1.44 is 1.2.
- So P(t) = 800(1.2)t. Each year the population is multiplied by 1.2.
- 1.2 = 1 + 0.20, so the population grows 20% each year.
Fast methodRewrite the base so the exponent is just t.
Quick checkCheck: 1.2 × 1.2 = 1.44, matching 44% growth over 2 years ✓.
Why the other choices are wrong- A (44%): read the base 1.44 as the yearly growth factor, but 1.44 is the factor for 2 years
- B (22%): split the 2-year growth of 44% evenly into two years
- D (72%): divided 1.44 by 2 to get 0.72 and read it as the yearly rate
Building Functions, Sequences, Transformations and Inverses
Build a function from a situation by naming the input, the starting value and how the output changes; combine functions with +, −, × (profit = revenue − cost, and subtract every term of the cost). An arithmetic sequence adds the same difference each step; a geometric sequence multiplies by the same ratio. Sequences can be written recursively (from the term before) or explicitly (from n). f(x) + k moves a graph up k, f(x − h) moves it right h, −f(x) reflects it over the x-axis, and k·f(x) stretches it vertically by a factor of k when k > 1 (and shrinks it when 0 < k < 1). The inverse of a linear function undoes it: swap the roles of x and y and solve, and remember that (a, b) on f means (b, a) on f⁻¹. Traps: x − h moves right, not left; f⁻¹ is not 1 ÷ f; undo steps in reverse order.
Key formulas| Arithmetic sequence | an=a1+d(n−1),an=an−1+d |
| Geometric sequence | an=a1rn−1,an=ran−1 |
| Translations | y=f(x−h)+k: right h, up k |
| Reflection and stretch | y=−f(x) (over the x-axis),y=kf(x) (vertical stretch if k>1, shrink if 0<k<1) |
| Inverse of a linear function | f(x)=mx+b ⇒ f−1(x)=mx−b(m=0) |
Explicit rule for an arithmetic sequence
Method. For an arithmetic sequence, aₙ = a₁ + d(n − 1).
Worked example. An arithmetic sequence has first term 7 and common difference 4. What is the 20th term? Type your answer as a whole number.
Answer83 (accepted: 83)
Step-by-step- The explicit rule is aₙ = 7 + 4(n − 1).
- For n = 20: a₂₀ = 7 + 4(19) = 7 + 76 = 83.
Fast methodStart at the first term and add the difference 19 times.
Quick checkCheck: the terms go 7, 11, 15, …; 83 − 7 = 76 = 19 × 4 ✓.
Translating an absolute value graph
Method. For y = f(x − h) + k, the graph of f moves right h units and up k units.
Worked example. The function g is defined by g(x) = |x − 2| + 3. The graph of g is a translation of the graph of y = |x|. What are the coordinates of the vertex of the graph of g?
- (A) (2, 3)
- (B) (−2, 3)
- (C) (3, 2)
- (D) (−2, −3)
AnswerA — (2, 3)
Step-by-step- The vertex of y = |x| is (0, 0).
- Replacing x with x − 2 shifts the graph right 2 units; adding 3 shifts it up 3 units.
- So the vertex moves to (2, 3).
Fast methodVertex of |x − h| + k is (h, k).
Quick checkCheck: g(2) = |0| + 3 = 3, and g(x) ≥ 3 for every x ✓.
Why the other choices are wrong- B ((−2, 3)): moved left because of the minus sign; x − 2 moves the graph right 2
- C ((3, 2)): swapped the horizontal and vertical shifts
- D ((−2, −3)): reversed both shifts
Points on the graph of an inverse
Method. (p, q) is on the graph of f exactly when (q, p) is on the graph of f⁻¹.
Worked example. The function f is defined by f(x) = 4x − 7. The point (a, 5) lies on the graph of f⁻¹, the inverse of f. What is the value of a?
- (A) 3
- (B) 27
- (C) 1/13
- (D) 13
AnswerD — 13
Step-by-step- If (a, 5) is on the graph of f⁻¹, then (5, a) is on the graph of f, because an inverse swaps inputs and outputs.
- So a = f(5) = 4(5) − 7 = 13.
Fast methodSwap the coordinates and use f.
Quick checkCheck: f⁻¹(x) = (x + 7) ÷ 4, and f⁻¹(13) = 20 ÷ 4 = 5 ✓.
Why the other choices are wrong- A (3): solved f(x) = 5, which finds f⁻¹(5), not the input of f⁻¹ that gives 5
- B (27): added 7 instead of subtracting: 4(5) + 7 = 27
- C (1/13): took the reciprocal of f(5) = 13, confusing f⁻¹ with 1/f
Linear and Exponential Models
Linear functions change by equal differences over equal intervals: the same amount is added each step. Exponential functions change by equal factors: the same percent is gained or lost each step. In a table, check the differences and the ratios. Write a linear model from a rate and a starting value, and an exponential model from a starting value and a growth factor (for example, doubling every 3 hours gives 2t/3). In context, the constant in a linear model is the starting value and the coefficient is the rate; in a(b)t, a is the starting value and b is the factor kept or gained each period. A quantity growing by a constant percent eventually passes any quantity growing by a constant amount.
Key formulas| Linear model | y=mx+b(m=rate, b=start) |
| Exponential model | y=abx(a=start, b=factor per step) |
| Percent rate | b=1+r (growth),b=1−r (decay) |
| Repeated period | doubles every p units: y=a⋅2t/p |
| Equal factors | f(x+1)=bf(x) for f(x)=abx |
Linear or exponential from a table
Method. Linear functions change by equal differences over equal intervals; exponential functions change by equal factors.
Worked example. A table shows these values of y for x = 0, 1, 2 and 3: y = 5, 15, 45 and 135. Which statement describes the relationship?
- (A) It is linear, because y increases by 10 when x goes from 0 to 1.
- (B) It is linear, because y changes by the same factor each time x increases by 1.
- (C) It is exponential, because y is multiplied by 3 each time x increases by 1.
- (D) It is exponential, because y increases by 10 each time x increases by 1.
AnswerC — It is exponential, because y is multiplied by 3 each time x increases by 1.
Step-by-step- Differences: 15 − 5 = 10, 45 − 15 = 30, 135 − 45 = 90. They are not equal, so it is not linear.
- Ratios: 15 ÷ 5 = 3, 45 ÷ 15 = 3, 135 ÷ 45 = 3. Equal ratios mean exponential.
- y = 5(3)x.
Fast methodEqual differences → linear; equal ratios → exponential.
Quick checkCheck: 5 × 3³ = 135 ✓.
Why the other choices are wrong- A (It is linear, because y increases by 10 when x goes from 0 to 1.): looked only at the first difference; the next differences are 30 and 90
- B (It is linear, because y changes by the same factor each time x increases by 1.): mixed up the rules: a constant factor means exponential, not linear
- D (It is exponential, because y increases by 10 each time x increases by 1.): gave the right type for a wrong reason; equal differences would make it linear
Writing an exponential function from two points
Method. For y = a(b)x, a is the value at x = 0 and b is the factor for each increase of 1 in x.
Worked example. An exponential function of the form y = a(b)x passes through the points (0, 6) and (2, 54). Which equation represents the function?
- (A) y = 6(3)x
- (B) y = 6(9)x
- (C) y = 24x + 6
- (D) y = 3(6)x
Step-by-step- At x = 0, y = a(b)⁰ = a, so a = 6.
- At x = 2: 6b² = 54, so b² = 9 and b = 3 (b must be positive).
- The function is y = 6(3)x.
Fast methodStarting value from x = 0, then the factor per step.
Quick checkCheck: 6 × 3² = 54 ✓.
Why the other choices are wrong- B (y = 6(9)x): used the total factor 54 ÷ 6 = 9 for one step, but it covers 2 steps
- C (y = 24x + 6): wrote a linear function through the two points instead of an exponential one
- D (y = 3(6)x): swapped the starting value and the growth factor
Exponential growth overtaking linear growth
Method. Exponential growth eventually exceeds linear growth; find the crossover by comparing values year by year.
Worked example. Two savings plans each start with $1,000. In Plan A, the balance after t years is A(t) = 1,000 + 150t. In Plan B, the balance is B(t) = 1,000(1.1)t. After how many whole years will Plan B first have a greater balance than Plan A? Type your answer as a whole number.
Answer9 (accepted: 9)
Step-by-step- Part A: compare year by year. After 8 years: A(8) = 1,000 + 1,200 = 2,200 and B(8) = 1,000(1.1)⁸ ≈ 2,143.59, so A is still greater.
- Part B: after 9 years: A(9) = 2,350 and B(9) = 1,000(1.1)⁹ ≈ 2,357.95, so B is greater.
- Plan B first has the greater balance after 9 years. A quantity growing by a constant percent eventually passes one growing by a constant amount.
Fast methodUse a table on the calculator and look for the first year B(t) > A(t).
Quick checkCheck: B(9) − A(9) ≈ 7.95 > 0 and B(8) − A(8) ≈ −56.41 < 0 ✓.