This topic covers the Geometry standards on the grade 10 MCAS: rigid motions, congruence, proofs about lines, angles, triangles and parallelograms, polygon angles and constructions (G-CO); dilations, similarity, the Pythagorean theorem and right-triangle trigonometry (G-SRT); circle angles, arc length, sector area and radians (G-C); circle equations, parabolas from a focus and directrix, and coordinate proofs, slopes, partitions, perimeters and areas (G-GPE); and volumes of cylinders, pyramids, cones and spheres (G-GMD). Geometry is about 35% of the grade 10 points, the largest reporting category. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions; Session 1 allows no calculator, and Session 2 allows a scientific or graphing calculator (TI or Desmos). You get the grade 10 reference sheet, which includes area and volume formulas, the Pythagorean theorem, the trigonometric ratios and the special right triangles. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; the others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.
Rigid motions (translations, reflections and rotations) move a figure without changing its size or shape, so they keep lengths and angle measures. Learn the coordinate rules and apply a sequence of motions one step at a time, in the order given. Two figures are congruent when a sequence of rigid motions maps one onto the other; for triangles, SSS, SAS, ASA and AAS prove congruence, but SSA and AAA do not. Know the angle facts that come from these ideas: vertical angles are equal, a transversal across parallel lines makes equal alternate interior and corresponding angles, the angles of a triangle add to 180°, base angles of an isosceles triangle are equal, and opposite angles of a parallelogram are equal while consecutive angles are supplementary. For polygons, the interior angles add to (n − 2) × 180° and the exterior angles of a convex polygon (one at each vertex) always add to 360°. Constructions with a compass and straightedge (copying an angle, bisecting a segment or angle, drawing perpendicular and parallel lines) are justified by these same theorems. Common traps: rotating clockwise when the question says counterclockwise, using a theorem in the wrong direction (a theorem instead of its converse), and confusing an included side with a non-included one.
Key formulas| Reflections | |
| Rotations about the origin (counterclockwise) | |
| Translation | |
| Polygon angles | |
| Exterior angle of a triangle |
Method. For a reflection, the line of reflection is the perpendicular bisector of each segment from a point to its image.
Worked example. Point P(3, −5) is reflected across the y-axis. What are the coordinates of its image, P′?
Method. Interior angle of a regular n-gon = (n − 2) × 180° ÷ n, or 180° minus the exterior angle 360° ÷ n.
Worked example. A stop sign is shaped like a regular octagon. What is the measure of each interior angle of a regular octagon?
Method. Do the motions one at a time, in the stated order, writing the image after each.
Worked example. Point A(4, −1) is rotated 90° counterclockwise about the origin. The image is then translated by the rule (x, y) → (x − 2, y + 3). What are the coordinates of the final image?
A dilation with center O and scale factor k multiplies every distance from O by k; it keeps angles but changes lengths (k > 1 enlarges, 0 < k < 1 shrinks), and a line not through the center maps to a parallel line. Figures are similar when a dilation and rigid motions map one onto the other; for triangles, two pairs of equal angles (AA) are enough. In similar figures, matching sides are in the same ratio, which is how you solve shadow, map and model problems and the triangle proportionality theorem (a line parallel to one side divides the other two sides proportionally). In a right triangle, label the sides opposite, adjacent and hypotenuse from the angle you are using, then pick sine, cosine or tangent; use the inverse functions (sin⁻¹, cos⁻¹, tan⁻¹) to find an angle. The sine of an angle equals the cosine of its complement. The grade 10 reference sheet gives the Pythagorean theorem, the trigonometric ratios and the 45°-45°-90° and 30°-60°-90° triangles; set your calculator to degrees in Session 2. Common traps: using the wrong ratio, dividing when you should multiply, inverting a proportion, and angles of depression (they equal the angle of elevation from the other end).
Key formulas| Dilation about the origin | |
| Trigonometric ratios | |
| Complementary angles | |
| Pythagorean theorem | |
| Special right triangles | |
| Triangle proportionality |
Method. Centered at the origin, a dilation multiplies every coordinate by k.
Worked example. Point B(6, −4) is dilated by a scale factor of 1/2 with the center of dilation at the origin. What are the coordinates of B′?
Method. Label opposite, adjacent and hypotenuse from the given angle, then choose sine, cosine or tangent (SOH-CAH-TOA).
Worked example. A 15-foot ladder leans against a vertical wall. The ladder makes a 70° angle with the level ground. To the nearest tenth of a foot, how high up the wall does the top of the ladder reach?
Method. Prove the triangles similar first (AA), then write a proportion of matching sides.
Worked example. In right triangle ABC, the right angle is at C. The altitude from C meets the hypotenuse AB at point D. AD = 4 centimeters and DB = 9 centimeters. What is the length of the altitude CD?
All circles are similar. A central angle equals its arc; an inscribed angle is half its arc, so an angle inscribed in a semicircle is a right angle. A radius drawn to a point of tangency is perpendicular to the tangent, and two tangent segments from the same outside point are equal. The opposite angles of a quadrilateral inscribed in a circle are supplementary. Arc length and sector area are the same fraction of the circumference and of the area as the central angle is of 360°. A radian is the angle whose arc equals the radius, so θ (in radians) = arc length ÷ radius. A circle with center (h, k) and radius r has the equation (x − h)² + (y − k)² = r²; if the equation is expanded, complete the square in x and in y to find the center and radius. Common traps: forgetting to halve for an inscribed angle, mixing up arc length (uses 2πr) with sector area (uses πr²), keeping the signs of h and k inside the parentheses, and forgetting to square (or take the square root of) the radius. Arc length and sector area may not be on the reference sheet, so learn them.
Key formulas| Inscribed angle | |
| Arc length | |
| Sector area | |
| Equation of a circle | |
| Inscribed quadrilateral |
Method. Central angle = arc; inscribed angle = half the arc.
Worked example. In a circle, inscribed angle ∠PQR intercepts arc PR, which measures 110°. What is m∠PQR?
Method. Arc length is the same fraction of the circumference as the central angle is of 360°.
Worked example. A circle has a radius of 9 inches. A central angle of 80° intercepts an arc. What is the length of the arc, in terms of π?
Method. Complete the square in x and in y to reach (x − h)² + (y − k)² = r².
Worked example. The equation of a circle is x² + y² − 6x + 10y − 2 = 0. What are the center and the radius of the circle?
Use coordinates to prove and measure. Parallel lines have equal slopes; perpendicular lines have slopes whose product is −1 (opposite reciprocals). Use the distance formula (the Pythagorean theorem on the grid) to find lengths, perimeters and areas, and use slopes and lengths together to classify triangles and quadrilaterals. To find the point that divides a segment in the ratio a : b, move a/(a + b) of the way from the first endpoint. A parabola is the set of points equally far from a focus and a directrix; the vertex is halfway between them, p is the vertex-to-focus distance, and when the directrix is a horizontal line, the equation is (x − h)² = 4p(y − k), opening toward the focus (p is negative if the focus is below the directrix). For solids, the reference sheet gives the volumes of a prism, cylinder, pyramid, cone and sphere; a cone or pyramid holds one-third of the matching cylinder or prism (Cavalieri's principle says solids with equal heights and equal cross-sections at every level have equal volumes). Common traps: forgetting the 1/3, using the diameter for r, using r² where r³ is needed, and confusing a ratio a : b with the fraction a/b.
Key formulas| Slope and distance | |
| Parallel and perpendicular | |
| Partition point (ratio a : b from A) | |
| Parabola from focus and directrix | |
| Volumes |
Method. Turn the ratio a : b into the fraction a/(a + b) of the way from the first endpoint.
Worked example. Point P is on segment AB with A(−2, 1) and B(10, 13). P divides AB so that AP : PB = 1 : 3. What are the coordinates of P?
Method. Substitute into the reference-sheet formula; square the radius before multiplying.
Worked example. A paper cup is shaped like a cone with a radius of 3 centimeters and a height of 8 centimeters. What is the volume of the cup, in terms of π?
Method. Set distance to the focus equal to distance to the directrix, square, and simplify.
Worked example. A parabola has its focus at (0, 3) and its directrix is the line y = −3. Which equation represents the parabola?