Massachusetts MCAS · Math · Grade 10

Grade 10: Study Guide

Grade 10 mathematics on the Massachusetts MCAS, built on the 2017 Massachusetts Curriculum Framework for Mathematics. The real test has two untimed sessions of about 90 minutes each, with 42 items including multiple-choice, short-answer and constructed-response questions, no calculator in Session 1, a calculator in Session 2, and a grade 10 reference sheet. Meeting Expectations starts at a scaled score of 500 (scale 440–560). Questions here are multiple choice and typed answers; the timer is a practice target.

07.01 Number and Quantity (Grade 10)

This topic covers grade 10 Number and Quantity: what rational exponents mean and why (N-RN.A.1), rewriting expressions with radicals and rational exponents (N-RN.A.2), sums and products of rational and irrational numbers (N-RN.B.3), and working with units, choosing quantities for a model, and the effects of measurement error and rounding (N-Q.A.1, N-Q.A.2, N-Q.A.3a); together these are about 15% of the grade 10 MCAS. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions; Session 1 allows no calculator and Session 2 allows a scientific or graphing calculator (TI or Desmos), and you get the grade 10 reference sheet, which includes unit conversions. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; all others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.

What Rational Exponents Mean

A rational exponent is a fraction used as an exponent. The rules for whole-number exponents still work, and they force the meaning: because (51/3^{1/3})³ = 51/3×3^{1/3 × 3} = 5¹ = 5, the number 51/3^{1/3} must be the cube root of 5. In general the denominator of the exponent is the root and the numerator is the power, so 163/4^{3/4} = (⁴√16)³ = 2³ = 8. A negative exponent means a reciprocal, not a negative number: 9−1/2^{-1/2} = 1/3. Common traps: reading 71/3^{1/3} as 7 ÷ 3, multiplying the base by the exponent, making the answer negative when the exponent is negative, and thinking the cube root of a negative number is not real (∛(−8) = −2).

Key formulas
Unit-fraction exponenta1/n=ana^{1/n}=\sqrt[n]{a}
Root and poweram/n=(an)m=amna^{m/n}=\left(\sqrt[n]{a}\right)^{m}=\sqrt[n]{a^{m}}
Why it must be so(a1/n)n=a1n⋅n=a1=a\left(a^{1/n}\right)^{n}=a^{\frac{1}{n}\cdot n}=a^{1}=a
Negative exponenta−p=1ap(a≠0)a^{-p}=\dfrac{1}{a^{p}}\quad(a\ne 0)
Odd root of a negative−83=−2  because  (−2)3=−8\sqrt[3]{-8}=-2\ \text{ because }\ (-2)^{3}=-8

Rational exponent as a root (N-RN.A.1)

Method. Rewrite am/n^{m/n} as the nth root of a, raised to the power m.

Worked example. Which expression is equal to 71/3^{1/3}?

  • (A) ∛7
  • (B) 7/3
  • (C) 7³
  • (D) 1/7³
AnswerA — ∛7
Step-by-step
  1. The denominator of the exponent tells which root to take: an exponent of 1/3 means the cube root.
  2. So 71/3^{1/3} = ∛7, the number whose cube is 7.
Fast methodDenominator = root, numerator = power.
Quick checkCheck: (71/3^{1/3})³ = 71^{1} = 7, and (∛7)³ = 7 ✓.
Why the other choices are wrong
  • B (7/3): multiplied the base by the exponent, reading 71/3^{1/3} as 7 × 1/3
  • C (7³): used the denominator 3 as the exponent instead of the root
  • D (1/7³): treated the fraction exponent as a negative exponent of 3

Evaluating a rational exponent (N-RN.A.2)

Method. For am/n^{m/n}, take the nth root first, then raise to the mth power.

Worked example. What is the value of 163/4^{3/4}?

  • (A) 12
  • (B) 64
  • (C) 8
  • (D) 1,024
AnswerC — 8
Step-by-step
  1. The denominator 4 means the fourth root: ⁴√16 = 2, because 2⁴ = 16.
  2. The numerator 3 means cube the result: 2³ = 8.
Fast methodTake the root first so the numbers stay small.
Quick checkCheck: 84^{4} = 4,096 and 163^{3} = 4,096, so 8 = 163/4^{3/4} ✓.
Why the other choices are wrong
  • A (12): multiplied 16 by 3/4
  • B (64): took the square root of 16 instead of the fourth root, then cubed
  • D (1,024): cubed 16 and then divided by 4 instead of taking the fourth root

Negative rational exponent with a fraction base (N-RN.A.2)

Method. Clear a negative exponent with a reciprocal, then apply root and power.

Worked example. What is the value of (1/27)−2/3^{-2/3}?

  • (A) 1/9
  • (B) 9
  • (C) −9
  • (D) 18
AnswerB — 9
Step-by-step
  1. Part A: A negative exponent means take the reciprocal: (1/27)−2/3^{-2/3} = 272/3^{2/3}.
  2. Part B: The denominator 3 means the cube root: ∛27 = 3.
  3. Part C: The numerator 2 means square: 3² = 9.
Fast methodFlip the base to clear the negative sign, then root, then power.
Quick checkCheck: 93/2^{3/2} = (√9)³ = 27, so 272/3^{2/3} = 9 ✓.
Why the other choices are wrong
  • A (1/9): ignored the negative sign in the exponent
  • C (−9): thought a negative exponent makes the answer negative
  • D (18): flipped 1/27 to 27 and then multiplied by 2/3

Rewriting Radicals and Exponents

You must move between radical form and exponent form and use the exponent rules with fractions. When you multiply powers of the same base, add the exponents (find a common denominator first); when you divide, subtract them; for a power of a power, multiply them. To simplify a square root, pull out the largest perfect-square factor: √72 = √(36 × 2) = 6√2. For a cube root, pull out perfect cubes. Common traps: √(a + b) is not √a + √b; adding the radicands when you add or multiply roots (√50 + √18 is not √68); forgetting to take the root of the factor you pull out (√72 is not 36√2); adding numerators and denominators of fraction exponents.

Key formulas
Product of rootsab=a b(a,b≥0)\sqrt{ab}=\sqrt{a}\,\sqrt{b}\quad(a,b\ge 0)
Radical to exponentamn=am/n\sqrt[n]{a^{m}}=a^{m/n}
Multiply same basear⋅as=ar+sa^{r}\cdot a^{s}=a^{r+s}
Divide same basearas=ar−s\dfrac{a^{r}}{a^{s}}=a^{r-s}
Power rules(ar)s=ars,(ab)r=arbr\left(a^{r}\right)^{s}=a^{rs},\qquad (ab)^{r}=a^{r}b^{r}

Simplifying a square root (N-RN.A.2)

Method. Write the radicand as (perfect square) × (other factor) and take the root of the perfect square.

Worked example. Which expression is equivalent to √72?

  • (A) 36√2
  • (B) 9√8
  • (C) 6 + √2
  • (D) 6√2
AnswerD — 6√2
Step-by-step
  1. Find the largest perfect-square factor of 72: 72 = 36 × 2.
  2. √72 = √36 × √2 = 6√2.
Fast methodLook for the biggest perfect square that divides the number.
Quick checkCheck: (6√2)² = 36 × 2 = 72 ✓.
Why the other choices are wrong
  • A (36√2): pulled the perfect square 36 out without taking its square root
  • B (9√8): split 72 as 9 × 8 and pulled 9 out without taking its square root
  • C (6 + √2): rewrote √(36 × 2) as √36 + √2, adding instead of multiplying

Product of radicals as one power (N-RN.A.2)

Method. Convert every radical to a rational exponent, then use the exponent rules.

Worked example. For x > 0, which expression is equivalent to ∛(x²) · √x?

  • (A) x1/3^{1/3}
  • (B) x7/6^{7/6}
  • (C) x3/5^{3/5}
  • (D) x²
AnswerB — x7/6^{7/6}
Step-by-step
  1. Write each radical as a power: ∛(x²) = x2/3^{2/3} and √x = x1/2^{1/2}.
  2. Same base, multiplying: add the exponents. 2/3 + 1/2 = 4/6 + 3/6 = 7/6.
  3. So the product is x7/6^{7/6}.
Fast methodChange roots to fraction exponents, then add with a common denominator.
Quick checkCheck with x = 64: ∛(64²) = 16 and √64 = 8, so the product is 128; 647/6^{7/6} = 27^{7} = 128 ✓.
Why the other choices are wrong
  • A (x1/3^{1/3}): multiplied the exponents 2/3 and 1/2 instead of adding them
  • C (x3/5^{3/5}): added the numerators and added the denominators: (2 + 1)/(3 + 2)
  • D (x²): wrote ∛(x²) as x3/2^{3/2}, flipping the exponent, then added

Power of a product with a rational exponent (N-RN.A.2)

Method. Apply the exponent to every factor, then multiply exponents for a power of a power.

Worked example. For x > 0, which expression is equivalent to (27x⁶)2/3^{2/3}?

  • (A) 9x⁴
  • (B) 18x⁴
  • (C) 9x20/3^{20/3}
  • (D) 27x⁴
AnswerA — 9x⁴
Step-by-step
  1. Part A: Raise each factor to the 2/3 power: (27x⁶)2/3^{2/3} = 272/3^{2/3} · (x⁶)2/3^{2/3}.
  2. Part B: 272/3^{2/3} = (∛27)² = 3² = 9.
  3. Part C: (x⁶)2/3^{2/3} = x6×2/3^{6 × 2/3} = x⁴. The result is 9x⁴.
Fast methodRoot first: ∛(27x⁶) = 3x², then square: 9x⁴.
Quick checkCheck with x = 1: (27)2/3^{2/3} = 9 and 9(1)⁴ = 9 ✓.
Why the other choices are wrong
  • B (18x⁴): multiplied 27 by 2/3 instead of raising 27 to the 2/3 power
  • C (9x20/3^{20/3}): added 6 and 2/3 for the power of a power instead of multiplying
  • D (27x⁴): applied the exponent to x only and left 27 unchanged

Rational and Irrational Numbers

A rational number can be written as a ratio of two integers (the bottom not zero); its decimal ends or repeats. An irrational number cannot; examples are π and the square root of any whole number that is not a perfect square. The sum or product of two rational numbers is always rational. A rational number plus an irrational number is always irrational, and a nonzero rational number times an irrational number is always irrational. Two irrational numbers can give either kind of answer: √2 · √8 = 4 and √5 + (4 − √5) = 4 are rational. To show a number like 2 + √3 is irrational, assume it equals a rational number r and show that √3 would then be rational, which is false. Traps: forgetting that 0 times anything is 0 (rational), treating a repeating decimal as irrational, and thinking every square root is irrational (√49 = 7).

Key formulas
Rational sumab+cd=ad+bcbd\dfrac{a}{b}+\dfrac{c}{d}=\dfrac{ad+bc}{bd}
Rational productab⋅cd=acbd\dfrac{a}{b}\cdot\dfrac{c}{d}=\dfrac{ac}{bd}
Rational + irrationalr+s is irrational when r is rational and s is irrationalr+s\ \text{is irrational when } r \text{ is rational and } s \text{ is irrational}
Nonzero rational × irrationalr⋅s is irrational when r≠0r\cdot s\ \text{is irrational when } r\ne 0
Key step of the proofr+s=t ⇒ s=t−r (rational, a contradiction)r+s=t\ \Rightarrow\ s=t-r\ \text{(rational, a contradiction)}

Identifying an irrational number (N-RN.B.3)

Method. Ask whether the number can be written as a ratio of two integers.

Worked example. Which number is irrational?

  • (A) √49
  • (B) 0.444… (the 4 repeats forever)
  • (C) √20
  • (D) 3/8
AnswerC — √20
Step-by-step
  1. √20 = 2√5. Since 20 is not a perfect square, √20 is irrational.
  2. √49 = 7, 0.444… = 4/9 and 3/8 are all ratios of integers, so they are rational.
Fast methodA square root of a whole number is rational only when the number is a perfect square.
Quick checkCheck: 4² = 16 and 5² = 25, so no whole number squares to 20 ✓.
Why the other choices are wrong
  • A (√49): thought every square root is irrational; √49 = 7
  • B (0.444… (the 4 repeats forever)): thought a decimal that never ends is irrational, but a repeating decimal equals 4/9
  • D (3/8): chose a fraction; 3/8 is a ratio of integers, so it is rational

Product of conjugates (N-RN.B.3)

Method. Simplify the expression completely before deciding rational or irrational.

Worked example. What is the value of (3 + √2)(3 − √2), and is it rational or irrational?

  • (A) 11, a rational number
  • (B) 9 − √2, an irrational number
  • (C) an irrational number, because both factors are irrational
  • (D) 7, a rational number
AnswerD — 7, a rational number
Step-by-step
  1. Multiply: (3 + √2)(3 − √2) = 9 − 3√2 + 3√2 − (√2)².
  2. The middle terms cancel and (√2)² = 2, so the product is 9 − 2 = 7.
  3. 7 = 7/1 is rational.
Fast method(a + b)(a − b) = a² − b².
Quick checkCheck: 3 + √2 ≈ 4.414 and 3 − √2 ≈ 1.586; 4.414 × 1.586 ≈ 7.0 ✓.
Why the other choices are wrong
  • A (11, a rational number): treated −√2 · √2 as +2 instead of −2
  • B (9 − √2, an irrational number): thought √2 · √2 = √2
  • C (an irrational number, because both factors are irrational): thought a product of two irrational numbers must be irrational

Proving a sum is irrational (N-RN.B.3)

Method. Assume the number is rational, isolate the known irrational part, and reach a contradiction.

Worked example. Ana wants to show that 2 + √3 is irrational. She assumes 2 + √3 = r, where r is a rational number. Which statement correctly finishes her argument?

  • (A) Then √3 = r + 2. The sum of two rational numbers is rational, so √3 would be rational, which is false. So 2 + √3 is irrational.
  • (B) Then √3 = r − 2. The difference of two rational numbers is rational, so √3 would be rational, which is false. So 2 + √3 is irrational.
  • (C) Then r² = 4 + 3 = 7, so r = √7. Since √7 is irrational, 2 + √3 is irrational.
  • (D) Since 2 is rational and √3 is irrational, their sum must be rational, so the assumption is true.
AnswerB — Then √3 = r − 2. The difference of two rational numbers is rational, so √3 would be rational, which is false. So 2 + √3 is irrational.
Step-by-step
  1. Part A: Assume 2 + √3 = r with r rational.
  2. Part B: Subtract 2 from both sides: √3 = r − 2. A rational number minus a rational number is rational.
  3. Part C: That says √3 is rational, but √3 is irrational. The assumption is false, so 2 + √3 is irrational.
Fast methodIsolate the irrational part; the other side is rational, which gives the contradiction.
Quick checkCheck: 2 + √3 ≈ 3.7320508…, a decimal that neither ends nor repeats ✓.
Why the other choices are wrong
  • A (Then √3 = r + 2. The sum of two rational numbers is rational, so √3 would be rational, which is false. So 2 + √3 is irrational.): made a sign error when subtracting 2 from both sides
  • C (Then r² = 4 + 3 = 7, so r = √7. Since √7 is irrational, 2 + √3 is irrational.): squared 2 + √3 as 2² + (√3)², leaving out the middle term
  • D (Since 2 is rational and √3 is irrational, their sum must be rational, so the assumption is true.): used a wrong rule: a rational number plus an irrational number is irrational, not rational

Units, Quantities and Accuracy

Units guide a solution. Write the units with every number, convert so the units in a formula match, and multiply by unit fractions such as (60 minutes)/(1 hour) so the unwanted units cancel. The units of an answer tell what it means: 1,200 bushels ÷ 40 acres = 30 bushels per acre. When you model a situation, choose a quantity that fits the question, such as a rate per student or per mile. Every measurement is approximate: a length measured to the nearest centimeter could be off by up to 0.5 cm, and that error grows when you compute an area or a volume. Rounding too early also adds error, so keep full values until the last step and report an answer no more precise than the tools allow. When drawing a graph, choose a scale and a starting value that show the data clearly. The grade 10 reference sheet lists unit conversions.

Key formulas
Unit fraction66 ft1 s×3600 s1 h×1 mi5280 ft=45 mih\dfrac{66\ \text{ft}}{1\ \text{s}}\times\dfrac{3600\ \text{s}}{1\ \text{h}}\times\dfrac{1\ \text{mi}}{5280\ \text{ft}}=45\ \dfrac{\text{mi}}{\text{h}}
Common conversions1 mi=5280 ft,1 km=1000 m,1 L=1000 mL1\ \text{mi}=5280\ \text{ft},\quad 1\ \text{km}=1000\ \text{m},\quad 1\ \text{L}=1000\ \text{mL}
Measurement to the nearest unittrue value within ±0.5 unit of the reading\text{true value within } \pm 0.5\ \text{unit of the reading}
Error in a computed areaAmax⁡=(l+e)(w+e),Amin⁡=(l−e)(w−e)A_{\max}=(l+e)(w+e),\qquad A_{\min}=(l-e)(w-e)
Rate as a quantityrate=amounttime,density=massvolume\text{rate}=\dfrac{\text{amount}}{\text{time}},\quad \text{density}=\dfrac{\text{mass}}{\text{volume}}

Matching units in a formula (N-Q.A.1)

Method. Convert all measurements to the unit the answer needs before substituting.

Worked example. The perimeter of a rectangle is P = 2l + 2w. A rectangle has length 3 meters and width 40 centimeters. What is its perimeter, in meters?

  • (A) 86
  • (B) 14
  • (C) 6.08
  • (D) 6.8
AnswerD — 6.8
Step-by-step
  1. Convert the width to meters: 40 cm = 40/100 m = 0.4 m.
  2. P = 2(3) + 2(0.4) = 6 + 0.8 = 6.8 meters.
Fast methodPut both lengths in the same unit before using the formula.
Quick checkCheck: in centimeters, P = 2(300) + 2(40) = 680 cm = 6.8 m ✓.
Why the other choices are wrong
  • A (86): did not convert 40 centimeters to meters
  • B (14): treated 40 centimeters as 4 meters
  • C (6.08): converted 40 centimeters to 0.04 meter instead of 0.4 meter

Converting a rate with unit fractions (N-Q.A.1)

Method. Multiply by unit fractions so each unwanted unit cancels.

Worked example. A train travels at 66 feet per second. What is this speed in miles per hour? (1 mile = 5,280 feet)

  • (A) 45
  • (B) 0.75
  • (C) 96.8
  • (D) 135
AnswerA — 45
Step-by-step
  1. Feet per second to feet per hour: 66 × 3,600 = 237,600 feet per hour.
  2. Feet to miles: 237,600 ÷ 5,280 = 45 miles per hour.
Fast methodSet up unit fractions so seconds and feet cancel.
Quick checkCheck: 45 mi/h × 5,280 ft/mi ÷ 3,600 s/h = 66 ft/s ✓.
Why the other choices are wrong
  • B (0.75): converted seconds to minutes only, giving miles per minute
  • C (96.8): inverted both conversion factors
  • D (135): used 1,760 (yards in a mile) instead of 5,280 feet

Measurement error in a computed area (N-Q.A.3a)

Method. Find the extreme values of each measurement, then compute with them.

Worked example. A rectangular poster is measured as 12 cm by 8 cm, each to the nearest centimeter, so each true length could be up to 0.5 cm more or less than its measurement. What is the upper limit of the poster's true area, in square centimeters?

  • (A) 96
  • (B) 97
  • (C) 106.25
  • (D) 117
AnswerC — 106.25
Step-by-step
  1. Part A: The largest possible length is 12 + 0.5 = 12.5 cm and the largest possible width is 8 + 0.5 = 8.5 cm.
  2. Part B: Upper limit of the area = 12.5 × 8.5 = 106.25 square centimeters.
  3. Part C: The measured area, 96 square centimeters, could be off by more than 10 square centimeters, so a small error in each length makes a bigger error in the area.
Fast methodPush each length to its limit first, then multiply.
Quick checkCheck: the lower limit is 11.5 × 7.5 = 86.25, and 96 lies between 86.25 and 106.25 ✓.
Why the other choices are wrong
  • A (96): ignored the measurement error
  • B (97): added the two errors of 0.5 to the area instead of to the lengths
  • D (117): used an error of 1 cm instead of 0.5 cm

07.02 Algebra (Grade 10)

This topic covers the grade 10 Algebra standards: seeing structure in expressions, adding, subtracting and multiplying polynomials, creating equations and inequalities (including rearranging formulas), linear and absolute value equations and inequalities, solving quadratic equations, systems of linear and linear–quadratic equations, and graphs of equations and inequalities. Algebra and Functions together make up about 35% of the points on the grade 10 MCAS, and this algebra part is about 20%. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions worth 4 points each; Session 1 allows no calculator, and Session 2 allows a scientific or graphing calculator (TI or Desmos). You get the grade 10 reference sheet (area, volume, the Pythagorean theorem and trigonometry facts), so learn the algebra formulas here, including the quadratic formula, by heart. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; all others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.

Structure of Expressions and Polynomials

Read an expression by its parts: in 2.75m + 3.50 the coefficient 2.75 is a rate and 3.50 is a fixed amount; in a(b)t^{t} the number a is the starting value and b is the factor applied each time period (b = 1 + r for growth, b = 1 − r for decay). Add, subtract and multiply polynomials by combining like terms and distributing every term; when subtracting, change the sign of every term in the second polynomial. Use structure to rewrite: factor out the GCF first, then look for a difference of squares or a trinomial; factored form shows the zeros, and completing the square shows a maximum or minimum. Exponent rules rewrite growth over different time periods, for example 1.21t^{t} = 1.12t^{2t}. Traps: (a − b)² is not a² − b², a factor of 0.85 means losing 15% (not 85%), and halving a yearly rate does not give the half-year rate.

Key formulas
Difference of squaresa2−b2=(a−b)(a+b)a^2-b^2=(a-b)(a+b)
Square of a binomial(a±b)2=a2±2ab+b2(a\pm b)^2=a^2\pm 2ab+b^2
Completing the squarex2+bx+c=(x+b2)2+c−(b2)2x^2+bx+c=\left(x+\tfrac{b}{2}\right)^2+c-\left(\tfrac{b}{2}\right)^2
Exponential growth and decayy=a(1+r)tory=a(1−r)ty=a(1+r)^t\quad\text{or}\quad y=a(1-r)^t
Rewriting the time periodbt=(b1/n)ntb^{t}=\left(b^{1/n}\right)^{nt}

Interpreting a decay factor (A-SSE.A.1b)

Method. In a(b)t^{t}, a is the starting value and b is the growth or decay factor: b = 1 + r for growth and b = 1 − r for decay.

Worked example. The value, in dollars, of a used bicycle t years after it is bought is given by the expression 420(0.85)t^{t}. What does the number 0.85 tell you about the value of the bicycle?

  • (A) The value decreases by 85% each year.
  • (B) The value decreases by $0.85 each year.
  • (C) The value increases by 85% each year.
  • (D) The value decreases by 15% each year.
AnswerD — The value decreases by 15% each year.
Step-by-step
  1. In a(b)t^{t}, a is the starting value and b is the factor the value is multiplied by each year.
  2. Here b = 0.85 = 1 − 0.15, so each year the bicycle keeps 85% of its value.
  3. Keeping 85% means losing 15%, so the value decreases by 15% each year.
Fast methodDecay factor b = 1 − r, so r = 1 − 0.85 = 0.15 = 15%.
Quick checkCheck: after 1 year, 420(0.85) = 357, and 420 − 357 = 63, which is 15% of 420 ✓.
Why the other choices are wrong
  • A (The value decreases by 85% each year.): read the factor 0.85 as the percent lost; 0.85 is the part kept, so 85% is kept and 15% is lost
  • B (The value decreases by $0.85 each year.): treated the factor as an amount subtracted each year, as in a linear expression
  • C (The value increases by 85% each year.): thought any factor in an exponential expression means growth; a factor less than 1 means decay

Multiplying polynomials (A-APR.A.1)

Method. To multiply polynomials, multiply every term of one by every term of the other, then combine like terms.

Worked example. Which expression is equivalent to (2x − 3)(x² + 4x − 5)?

  • (A) 2x³ + 5x² − 22x − 15
  • (B) 2x³ + 5x² + 2x + 15
  • (C) 2x³ + 5x² − 22x + 15
  • (D) 2x³ + 11x² − 22x + 15
AnswerC — 2x³ + 5x² − 22x + 15
Step-by-step
  1. Multiply 2x by each term: 2x · x² + 2x · 4x + 2x · (−5) = 2x³ + 8x² − 10x.
  2. Multiply −3 by each term: −3 · x² + (−3) · 4x + (−3)(−5) = −3x² − 12x + 15.
  3. Combine like terms: 2x³ + (8x² − 3x²) + (−10x − 12x) + 15 = 2x³ + 5x² − 22x + 15.
Fast methodDistribute each term of the binomial across all three terms, then combine like terms.
Quick checkCheck with x = 1: (2 − 3)(1 + 4 − 5) = (−1)(0) = 0, and 2 + 5 − 22 + 15 = 0 ✓.
Why the other choices are wrong
  • A (2x³ + 5x² − 22x − 15): multiplied (−3)(−5) as −15 instead of +15
  • B (2x³ + 5x² + 2x + 15): multiplied (−3)(4x) as +12x instead of −12x, so −10x + 12x = 2x
  • D (2x³ + 11x² − 22x + 15): multiplied (−3)(x²) as +3x² instead of −3x², so 8x² + 3x² = 11x²

Completing the square to find a minimum (A-SSE.B.3b)

Method. Complete the square to write x² + bx + c as (x + b/2)² + (c − (b/2)²); the constant at the end is the minimum value.

Worked example. The cost, in dollars, for a small shop to make x hundred mugs is C = x² − 12x + 50. Which form of C shows the minimum cost, and what is the minimum cost?

  • (A) C = (x − 6)² + 14; the minimum cost is $6, when x = 14
  • (B) C = (x − 6)² + 14; the minimum cost is $14, when x = 6
  • (C) C = (x − 6)² + 86; the minimum cost is $86, when x = 6
  • (D) C = (x − 12)² − 94; the minimum cost is −$94, when x = 12
AnswerB — C = (x − 6)² + 14; the minimum cost is $14, when x = 6
Step-by-step
  1. Part A: Half of −12 is −6, and (−6)² = 36. Add and subtract 36: C = (x² − 12x + 36) − 36 + 50.
  2. Part B: Write the square: C = (x − 6)² + 14.
  3. Part C: (x − 6)² is never negative and equals 0 when x = 6, so the minimum cost is $14 when x = 6 (600 mugs).
Fast methodVertex form (x − h)² + k: minimum k at x = h, with h = half of 12 = 6 and k = 50 − 36 = 14.
Quick checkCheck: C(6) = 36 − 72 + 50 = 14 ✓, and C(5) = 25 − 60 + 50 = 15 > 14 ✓.
Why the other choices are wrong
  • A (C = (x − 6)² + 14; the minimum cost is $6, when x = 14): read the vertex backward: the minimum value is the constant 14, reached when x = 6
  • C (C = (x − 6)² + 86; the minimum cost is $86, when x = 6): added 36 to 50 instead of subtracting it after adding 36 inside the square
  • D (C = (x − 12)² − 94; the minimum cost is −$94, when x = 12): used b = 12 instead of half of b: 50 − 12² = −94

Linear Equations, Inequalities, Absolute Value and Formulas

Create equations and inequalities from a situation: name the variable, write the fixed amount and the rate, then solve and check the answer in the story. Each step of solving should follow from a property (distributive property, addition or subtraction property of equality, and so on). When you multiply or divide an inequality by a negative number, reverse the sign. Massachusetts includes absolute value: |A| = b (b > 0) splits into A = b or A = −b; |A| < b is a "between" (and) statement; |A| > b is an "or" statement; if the absolute value equals a negative number there is no solution. To solve a formula for one variable, undo the operations around that variable in reverse order. Traps: rounding up when only whole items fit, missing the negative case of an absolute value, and dividing by only part of a sum.

Key formulas
Absolute value equation∣A∣=b (b>0) ⇒ A=b or A=−b|A|=b\ (b>0)\ \Rightarrow\ A=b\ \text{or}\ A=-b
Less than: between∣A∣<b   ⟺   −b<A<b|A|<b\ \iff\ -b<A<b
Greater than: or∣A∣>b   ⟺   A<−b or A>b|A|>b\ \iff\ A<-b\ \text{or}\ A>b
Negative value∣A∣=c with c<0 ⇒ no solution|A|=c\ \text{with}\ c<0\ \Rightarrow\ \text{no solution}
Dividing by a negative−3x≥12 ⇒ x≤−4-3x\ge 12\ \Rightarrow\ x\le -4
Solving a formulaI=Prt ⇒ r=IPtI=Prt\ \Rightarrow\ r=\dfrac{I}{Pt}

Rearranging a formula (A-CED.A.4)

Method. To solve a formula for one variable, undo the operations on that variable in reverse order, doing the same thing to both sides.

Worked example. The simple interest formula is I = Prt, where I is the interest, P is the principal, r is the rate and t is the time. Which equation is solved for r?

  • (A) r = IPt
  • (B) r = It/P
  • (C) r = I/(Pt)
  • (D) r = I − Pt
AnswerC — r = I/(Pt)
Step-by-step
  1. In I = Prt, r is multiplied by P and by t.
  2. Undo the multiplication by dividing both sides by Pt: I/(Pt) = r.
  3. So r = I/(Pt).
Fast methodDivide both sides by everything multiplied with r.
Quick checkCheck with P = 500, r = 0.04, t = 3: I = 60, and 60/(500 × 3) = 0.04 ✓.
Why the other choices are wrong
  • A (r = IPt): multiplied by P and t instead of dividing by them
  • B (r = It/P): divided by P but multiplied by t
  • D (r = I − Pt): subtracted P and t instead of dividing, but P, r and t are multiplied

Solving an absolute value equation (A-REI.B.3a)

Method. For |A| = b with b > 0, solve A = b and A = −b; if b < 0 there is no solution.

Worked example. What are all the solutions of |2x − 3| = 7?

  • (A) x = 5 only
  • (B) x = 5 or x = −2
  • (C) x = 5 or x = −5
  • (D) x = 5 or x = 2
AnswerB — x = 5 or x = −2
Step-by-step
  1. Part A: The expression inside the bars is 7 units from 0, so 2x − 3 = 7 or 2x − 3 = −7.
  2. Part B: 2x − 3 = 7 gives 2x = 10, so x = 5.
  3. Part C: 2x − 3 = −7 gives 2x = −4, so x = −2.
Fast method|A| = 7 means A = 7 or A = −7; solve both.
Quick checkCheck: |2(5) − 3| = |7| = 7 ✓ and |2(−2) − 3| = |−7| = 7 ✓.
Why the other choices are wrong
  • A (x = 5 only): solved only 2x − 3 = 7 and missed the case 2x − 3 = −7
  • C (x = 5 or x = −5): assumed the two solutions are opposites of each other
  • D (x = 5 or x = 2): dropped the negative sign in 2x = −4 and wrote 2x = 4

Solving an absolute value inequality (A-REI.B.3a)

Method. |A| < b becomes −b < A < b (and); |A| > b becomes A < −b or A > b (or).

Worked example. Which describes all solutions of |3x + 6| < 15?

  • (A) −7 < x < 3
  • (B) x < 3
  • (C) x < −7 or x > 3
  • (D) −3 < x < 3
AnswerA — −7 < x < 3
Step-by-step
  1. Part A: |3x + 6| < 15 means 3x + 6 is between −15 and 15: −15 < 3x + 6 < 15.
  2. Part B: Subtract 6 from all three parts: −21 < 3x < 9.
  3. Part C: Divide all three parts by 3: −7 < x < 3.
Fast methodLess than → "between": −15 < 3x + 6 < 15, then solve the compound inequality.
Quick checkCheck: x = 0 gives |6| = 6 < 15 ✓; x = 3 gives |15| = 15, not less than 15, so 3 is excluded ✓; x = −8 gives |−18| = 18 ✗ ✓.
Why the other choices are wrong
  • B (x < 3): solved only 3x + 6 < 15 and ignored the negative side
  • C (x < −7 or x > 3): wrote an "or" statement, which is for a greater-than absolute value inequality
  • D (−3 < x < 3): added 6 to −15 instead of subtracting 6, getting 3x > −9

Solving Quadratic Equations

Choose the method that fits: square roots when there is no x-term (x² = k or (x − h)² = k), factoring when the numbers are friendly, completing the square, or the quadratic formula. Always get 0 on one side before factoring, because the zero-product property works only for a product equal to 0. Keep both signs when you take a square root. The discriminant b² − 4ac tells how many real solutions there are: positive means two, zero means one, negative means none (in this material, answer "no real solutions"). In context, reject answers that make no sense, such as a negative time or length. Learn the quadratic formula by heart; do not count on finding it on the reference sheet.

Key formulas
Zero-product propertyab=0 ⇒ a=0 or b=0ab=0\ \Rightarrow\ a=0\ \text{or}\ b=0
Square rootsx2=k (k>0) ⇒ x=±kx^2=k\ (k>0)\ \Rightarrow\ x=\pm\sqrt{k}
Quadratic formulax=−b±b2−4ac2ax=\dfrac{-b\pm\sqrt{b^2-4ac}}{2a}
Discriminantb2−4ac>0: 2 real;=0: 1 real;<0: no real solutionsb^2-4ac>0:\ 2\ \text{real};\quad =0:\ 1\ \text{real};\quad <0:\ \text{no real solutions}
Completing the squarex2+bx=c ⇒ (x+b2)2=c+(b2)2x^2+bx=c\ \Rightarrow\ \left(x+\tfrac{b}{2}\right)^2=c+\left(\tfrac{b}{2}\right)^2

Solving by square roots (A-REI.B.4b)

Method. If (x − h)² = k with k > 0, then x − h = ±√k, so x = h ± √k.

Worked example. What are the solutions of (x − 3)² = 16?

  • (A) x = 7 only
  • (B) x = 19 or x = −13
  • (C) x = −7 or x = 1
  • (D) x = 7 or x = −1
AnswerD — x = 7 or x = −1
Step-by-step
  1. Take the square root of both sides: x − 3 = 4 or x − 3 = −4.
  2. Add 3: x = 7 or x = −1.
Fast methodx = 3 ± √16 = 3 ± 4.
Quick checkCheck: (7 − 3)² = 16 ✓ and (−1 − 3)² = (−4)² = 16 ✓.
Why the other choices are wrong
  • A (x = 7 only): used only the positive square root of 16
  • B (x = 19 or x = −13): did not take the square root and used x − 3 = ±16
  • C (x = −7 or x = 1): subtracted 3 instead of adding 3: x = −3 ± 4

Solving by factoring (A-REI.B.4b)

Method. Write the quadratic = 0, factor, and set each factor equal to 0.

Worked example. What are the solutions of x² − 2x − 24 = 0?

  • (A) x = 6 or x = −4
  • (B) x = −6 or x = 4
  • (C) x = 24 or x = 26
  • (D) x = 6 only
AnswerA — x = 6 or x = −4
Step-by-step
  1. Find two numbers with product −24 and sum −2: −6 and 4.
  2. Factor: (x − 6)(x + 4) = 0.
  3. Zero-product property: x − 6 = 0 or x + 4 = 0, so x = 6 or x = −4.
Fast methodProduct −24, sum −2 → −6 and 4 → zeros 6 and −4.
Quick checkCheck: 36 − 12 − 24 = 0 ✓ and 16 + 8 − 24 = 0 ✓.
Why the other choices are wrong
  • B (x = −6 or x = 4): used the numbers in the factors (x − 6)(x + 4) as the solutions without changing their signs
  • C (x = 24 or x = 26): wrote x(x − 2) = 24 and set each factor equal to 24; the zero-product property needs 0 on one side
  • D (x = 6 only): kept only the positive solution; both solutions make the equation true

Using the quadratic formula (A-REI.B.4b)

Method. For ax² + bx + c = 0, x = (−b ± √(b² − 4ac))/(2a); simplify the square root and divide every term by a common factor.

Worked example. What are the solutions of 2x² − 4x − 3 = 0?

  • (A) x = 2 ± √10
  • (B) x = (2 ± √10)/2
  • (C) x = (−2 ± √10)/2
  • (D) There are no real solutions.
AnswerB — x = (2 ± √10)/2
Step-by-step
  1. Part A: a = 2, b = −4, c = −3. Discriminant: b² − 4ac = 16 − 4(2)(−3) = 16 + 24 = 40.
  2. Part B: x = (4 ± √40)/4. Since √40 = √4 · √10 = 2√10, x = (4 ± 2√10)/4.
  3. Part C: Divide every term by 2: x = (2 ± √10)/2.
Fast methodx = (−b ± √(b² − 4ac))/(2a) with −b = 4, b² − 4ac = 40, 2a = 4.
Quick checkCheck: (2 + √10)/2 ≈ 2.58, and 2(2.58)² − 4(2.58) − 3 ≈ 13.31 − 10.32 − 3 ≈ 0 ✓.
Why the other choices are wrong
  • A (x = 2 ± √10): divided by a = 2 instead of 2a = 4
  • C (x = (−2 ± √10)/2): used b instead of −b at the start of the formula
  • D (There are no real solutions.): computed b² − 4ac as 16 − 24 = −8, ignoring that c = −3 is negative

Systems, Graphs and Inequalities in Two Variables

The graph of an equation in two variables is the set of all its solutions, so a point is on the graph exactly when its coordinates make the equation true. Solve a system of linear equations by substitution or elimination; replacing one equation by the sum of it and a multiple of the other keeps the same solutions. Two lines with the same slope and different intercepts are parallel (no solution); the same line gives infinitely many solutions. For a line and a parabola, set the expressions for y equal and solve the quadratic: there can be 0, 1 or 2 intersection points. The x-values where the graphs of f and g meet are the solutions of f(x) = g(x). A linear inequality y > mx + b is a half-plane: dashed boundary for > or <, solid for ≥ or ≤; a solution of a system of inequalities must satisfy every inequality. Traps: checking only one condition, and writing (x, y) in the wrong order.

Key formulas
Substitutiony=mx+b ⇒ replace y in the other equationy=mx+b\ \Rightarrow\ \text{replace } y \text{ in the other equation}
Eliminationadd k⋅(eq. 1) to eq. 2 so one variable cancels\text{add } k\cdot(\text{eq. 1}) \text{ to eq. 2 so one variable cancels}
Parallel linesm1=m2, b1≠b2 ⇒ no solutionm_1=m_2,\ b_1\ne b_2\ \Rightarrow\ \text{no solution}
Intersectionsf(x)=g(x) at the x-coordinates where the graphs meetf(x)=g(x)\ \text{at the } x\text{-coordinates where the graphs meet}
Half-planesy>mx+b: above, dashed;y≤mx+b: below, solidy>mx+b:\ \text{above, dashed};\quad y\le mx+b:\ \text{below, solid}

Solving a system by elimination (A-REI.C.6)

Method. Add or subtract the equations (after multiplying if needed) so one variable cancels, solve, then substitute back.

Worked example. What is the solution of the system 2x + y = 11 and x − y = 1?

  • (A) (3, 4)
  • (B) (4, 5)
  • (C) (4, 3)
  • (D) (4, −3)
AnswerC — (4, 3)
Step-by-step
  1. Add the equations so y cancels: 3x = 12, so x = 4.
  2. Substitute into x − y = 1: 4 − y = 1, so y = 3.
  3. The solution is (4, 3).
Fast methodThe y-terms are opposites, so add the equations.
Quick checkCheck: 2(4) + 3 = 11 ✓ and 4 − 3 = 1 ✓.
Why the other choices are wrong
  • A ((3, 4)): found the correct values but wrote them in the wrong order
  • B ((4, 5)): rewrote x − y = 1 as y = x + 1 instead of y = x − 1
  • D ((4, −3)): solved 8 + y = 11 as y = 8 − 11

Solving a linear–quadratic system (A-REI.C.7)

Method. For a line and a parabola, set the two expressions for y equal, solve the quadratic, and find y for each x.

Worked example. What are the solutions of the system y = x² − 3x + 2 and y = x − 1?

  • (A) (1, 0) only
  • (B) (−1, −2) and (−3, −4)
  • (C) (1, 0) and (3, 0)
  • (D) (1, 0) and (3, 2)
AnswerD — (1, 0) and (3, 2)
Step-by-step
  1. Part A: Set the expressions equal: x² − 3x + 2 = x − 1, so x² − 4x + 3 = 0.
  2. Part B: Factor: (x − 1)(x − 3) = 0, so x = 1 or x = 3.
  3. Part C: Use y = x − 1: x = 1 gives y = 0 and x = 3 gives y = 2. The solutions are (1, 0) and (3, 2).
Fast methodSubstitute the line into the parabola, solve the quadratic, then find each y from the line.
Quick checkCheck (3, 2): 9 − 9 + 2 = 2 ✓ and 3 − 1 = 2 ✓.
Why the other choices are wrong
  • A ((1, 0) only): found only one of the two x-values
  • B ((−1, −2) and (−3, −4)): factored x² − 4x + 3 as (x + 1)(x + 3), giving the wrong signs
  • C ((1, 0) and (3, 0)): found the x-values but used y = 0 instead of substituting into y = x − 1

Checking a solution to a system of inequalities in context (A-CED.A.3, A-REI.D.12)

Method. Write one inequality for each constraint; a solution of the system must make every inequality true.

Worked example. A school club sells tickets to a show. Adult tickets cost $8 and student tickets cost $5. The theater has at most 50 seats, and the club needs at least $300 in ticket sales. Which combination of tickets meets both conditions?

  • (A) 25 adult tickets and 20 student tickets
  • (B) 20 adult tickets and 25 student tickets
  • (C) 30 adult tickets and 25 student tickets
  • (D) 10 adult tickets and 40 student tickets
AnswerA — 25 adult tickets and 20 student tickets
Step-by-step
  1. Part A: Let a = adult tickets and s = student tickets. Seats: a + s ≤ 50. Money: 8a + 5s ≥ 300.
  2. Part B: 25 adult and 20 student: 25 + 20 = 45 ≤ 50 ✓ and 8(25) + 5(20) = 200 + 100 = 300 ≥ 300 ✓.
  3. Part C: Each other choice fails one condition: 20 and 25 gives $285; 30 and 25 needs 55 seats; 10 and 40 gives $280.
Fast methodWrite both inequalities, then test each choice in both.
Quick checkCheck: $300 meets "at least $300" because ≥ includes the boundary ✓.
Why the other choices are wrong
  • B (20 adult tickets and 25 student tickets): swapped the prices: 5(20) + 8(25) = 300, but the real sales are 8(20) + 5(25) = $285
  • C (30 adult tickets and 25 student tickets): checked only the money condition ($365); 55 tickets is more than 50 seats
  • D (10 adult tickets and 40 student tickets): checked only the seat condition (50 seats); the sales are only $280

07.03 Functions (Grade 10)

This topic covers the grade 10 MCAS function standards: function notation, domain and range, rate of change, key features of linear, quadratic, piecewise, step, absolute value and exponential graphs, building functions and sequences, transformations, inverses of linear functions, and linear versus exponential models. Algebra and Functions together make up about 35% of the points on the grade 10 MCAS, and this functions part is about 15%. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions worth 4 points each. Session 1 allows no calculator; Session 2 allows a scientific or graphing calculator (TI or Desmos), and you have the grade 10 reference sheet. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; all others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.

Functions, Notation, Domain and Rate of Change

A function gives exactly one output for each input. In f(x), x is the input and f(x) is the output, so f(3) = 10 means the input 3 gives the output 10. To evaluate, put the input in parentheses everywhere x appears; to solve f(x) = c, find the input that gives c. In a real situation, the domain is only the inputs that make sense (whole numbers for counted things, times from start to finish). The average rate of change over an interval is the change in output divided by the change in input. Common traps: swapping input and output, squaring a negative without parentheses, giving the range when the domain is asked, and forgetting to divide by the change in x.

Key formulas
Functioneach input x ↦ exactly one output f(x)\text{each input }x\ \mapsto\ \text{exactly one output }f(x)
Function notationf(a)=b  ⟺  (a, b) is on the graph of ff(a)=b\iff (a,\,b)\text{ is on the graph of }f
Domain and rangedomain={inputs},range={outputs}\text{domain}=\{\text{inputs}\},\quad \text{range}=\{\text{outputs}\}
Average rate of changef(b)−f(a)b−a\dfrac{f(b)-f(a)}{b-a}

Identifying a function

Method. A relation is a function when every input has exactly one output; repeated outputs are allowed.

Worked example. Which set of ordered pairs represents y as a function of x?

  • (A) {(1, 4), (2, 4), (3, 6), (5, 6)}
  • (B) {(1, 4), (1, 5), (2, 6), (3, 7)}
  • (C) {(4, 1), (4, 2), (5, 3), (6, 4)}
  • (D) {(2, 3), (3, 2), (2, 5), (5, 2)}
AnswerA — {(1, 4), (2, 4), (3, 6), (5, 6)}
Step-by-step
  1. A function gives exactly one output for each input, so no x-value may appear with two different y-values.
  2. In {(1, 4), (2, 4), (3, 6), (5, 6)} the inputs 1, 2, 3 and 5 each appear once. Outputs may repeat.
  3. Each of the other sets has an input that is paired with two different outputs.
Fast methodScan the first numbers only: a repeated x with a different y means not a function.
Quick checkCheck: inputs 1, 2, 3, 5 are all different ✓.
Why the other choices are wrong
  • B ({(1, 4), (1, 5), (2, 6), (3, 7)}): checked only that the outputs are all different and missed that the input 1 appears with two outputs
  • C ({(4, 1), (4, 2), (5, 3), (6, 4)}): checked the y-values instead of the x-values; the input 4 has two outputs
  • D ({(2, 3), (3, 2), (2, 5), (5, 2)}): thought a set is a function when no pair repeats exactly; the input 2 has outputs 3 and 5

Evaluating function notation

Method. To evaluate f(a), substitute a in parentheses for every x and follow the order of operations.

Worked example. The function f is defined by f(x) = 2x² − 3x + 1. What is the value of f(−2)?

  • (A) −1
  • (B) 15
  • (C) 3
  • (D) 23
AnswerB — 15
Step-by-step
  1. Replace every x with (−2): f(−2) = 2(−2)² − 3(−2) + 1.
  2. (−2)² = 4, so 2(4) = 8; and −3(−2) = 6.
  3. f(−2) = 8 + 6 + 1 = 15.
Fast methodPut the input in parentheses before squaring.
Quick checkCheck: 2(4) = 8, −3(−2) = +6, 8 + 6 + 1 = 15 ✓.
Why the other choices are wrong
  • A (−1): squared −2 as −4, so 2(−4) + 6 + 1 = −1
  • C (3): multiplied −3 by −2 and got −6, so 8 − 6 + 1 = 3
  • D (23): squared 2x instead of x: (2 × −2)² = 16, so 16 + 6 + 1 = 23

Average rate of change in context

Method. Average rate of change from a to b is (f(b) − f(a)) ÷ (b − a), in output units per input unit.

Worked example. The height, in feet, of a ball t seconds after it is thrown upward is h(t) = −16t² + 64t + 5. What is the average rate of change of h from t = 0 to t = 2, in feet per second?

  • (A) 34.5
  • (B) 64
  • (C) 32
  • (D) 37
AnswerC — 32
Step-by-step
  1. Find the heights: h(0) = 5 and h(2) = −16(4) + 64(2) + 5 = −64 + 128 + 5 = 69.
  2. Average rate of change = (h(2) − h(0)) ÷ (2 − 0) = (69 − 5) ÷ 2.
  3. 64 ÷ 2 = 32 feet per second: on average the ball rises 32 feet each second over the first 2 seconds.
Fast methodChange in output over change in input: (69 − 5) ÷ 2.
Quick checkCheck: 5 + 32 × 2 = 69 = h(2) ✓.
Why the other choices are wrong
  • A (34.5): divided h(2) = 69 by 2 without subtracting h(0) = 5
  • B (64): found the change in height, 69 − 5 = 64, but did not divide by the change in time
  • D (37): averaged the two heights, (69 + 5) ÷ 2, instead of finding the change per second

Graphs and Equivalent Forms

Different forms of a function show different features. Factored form a(x − p)(x − q) shows the zeros p and q. Vertex form a(x − h)² + k, found by completing the square, shows the vertex (h, k): a minimum when a > 0 and a maximum when a < 0. Piecewise functions use different rules on different intervals, so check which interval the input is in first. Step functions jump (for example, a charge for each hour or part of an hour), and the graph of a|x − h| + k is a V with vertex (h, k). For exponential functions a(b)x^{x} + k, the y-intercept is a + k, the horizontal asymptote is y = k, b > 1 means growth and 0 < b < 1 means decay; rewrite bt/2^{t/2} or b−x^{-x} to read the real rate. Compare two functions given in different ways by finding the same feature for each.

Key formulas
Factored formf(x)=a(x−p)(x−q) ⇒ zeros x=p, x=qf(x)=a(x-p)(x-q)\ \Rightarrow\ \text{zeros } x=p,\ x=q
Vertexx=−b2a,f(x)=a(x−h)2+k ⇒ vertex (h, k)x=-\dfrac{b}{2a},\qquad f(x)=a(x-h)^2+k\ \Rightarrow\ \text{vertex }(h,\,k)
Completing the squarex2+bx+c=(x+b2)2+c−(b2)2x^2+bx+c=\left(x+\tfrac{b}{2}\right)^2+c-\left(\tfrac{b}{2}\right)^2
Absolute value graphy=a∣x−h∣+k: vertex (h, k)y=a|x-h|+k:\ \text{vertex }(h,\,k)
Exponential growth and decayy=a(1+r)t (growth),y=a(1−r)t (decay)y=a(1+r)^t\ \text{(growth)},\qquad y=a(1-r)^t\ \text{(decay)}

Zeros from factored form

Method. In factored form f(x) = a(x − p)(x − q), the zeros are x = p and x = q.

Worked example. What are the zeros of the function f(x) = (x + 4)(x − 2)?

  • (A) x = 4 and x = −2
  • (B) x = −8 only
  • (C) x = 2 only
  • (D) x = −4 and x = 2
AnswerD — x = −4 and x = 2
Step-by-step
  1. A zero is an x-value that makes f(x) = 0.
  2. A product is 0 when a factor is 0: x + 4 = 0 or x − 2 = 0.
  3. So x = −4 or x = 2.
Fast methodSet each factor to zero and solve.
Quick checkCheck: f(−4) = 0 × (−6) = 0 and f(2) = 6 × 0 = 0 ✓.
Why the other choices are wrong
  • A (x = 4 and x = −2): used the numbers in the factors without changing their signs
  • B (x = −8 only): found f(0) = −8, which is the y-intercept, not a zero
  • C (x = 2 only): set only one factor equal to zero

Completing the square to find a minimum

Method. Complete the square to write a(x − h)² + k; for a > 0 the minimum value is k, at x = h.

Worked example. The function f is defined by f(x) = x² − 6x + 11. What is the minimum value of f?

  • (A) 3
  • (B) 2
  • (C) 11
  • (D) 20
AnswerB — 2
Step-by-step
  1. Complete the square: half of −6 is −3, and (−3)² = 9.
  2. x² − 6x + 11 = (x² − 6x + 9) − 9 + 11 = (x − 3)² + 2.
  3. (x − 3)² is never negative, so its smallest value is 0, at x = 3. The minimum value of f is 0 + 2 = 2.
Fast methodVertex form (x − h)² + k shows the minimum k.
Quick checkCheck: f(3) = 9 − 18 + 11 = 2 ✓.
Why the other choices are wrong
  • A (3): gave the x-value of the vertex, x = 3, instead of the minimum value
  • C (11): gave the y-intercept f(0) = 11 instead of the minimum
  • D (20): added 9 instead of subtracting it when completing the square: (x − 3)² + 20

Rewriting an exponential expression

Method. Use exponent properties to rewrite bt/k^{t/k} as (b1/k^{1/k})t^{t}; a factor 1 + r per year means r growth per year.

Worked example. The population of a town t years from now is modeled by P(t) = 800(1.44)t/2^{t/2}. By what percent does the population grow each year?

  • (A) 44%
  • (B) 22%
  • (C) 20%
  • (D) 72%
AnswerC — 20%
Step-by-step
  1. (1.44)t/2^{t/2} = ((1.44)1/2^{1/2})t^{t}, and the square root of 1.44 is 1.2.
  2. So P(t) = 800(1.2)t^{t}. Each year the population is multiplied by 1.2.
  3. 1.2 = 1 + 0.20, so the population grows 20% each year.
Fast methodRewrite the base so the exponent is just t.
Quick checkCheck: 1.2 × 1.2 = 1.44, matching 44% growth over 2 years ✓.
Why the other choices are wrong
  • A (44%): read the base 1.44 as the yearly growth factor, but 1.44 is the factor for 2 years
  • B (22%): split the 2-year growth of 44% evenly into two years
  • D (72%): divided 1.44 by 2 to get 0.72 and read it as the yearly rate

Building Functions, Sequences, Transformations and Inverses

Build a function from a situation by naming the input, the starting value and how the output changes; combine functions with +, −, × (profit = revenue − cost, and subtract every term of the cost). An arithmetic sequence adds the same difference each step; a geometric sequence multiplies by the same ratio. Sequences can be written recursively (from the term before) or explicitly (from n). f(x) + k moves a graph up k, f(x − h) moves it right h, −f(x) reflects it over the x-axis, and k·f(x) stretches it vertically by a factor of k when k > 1 (and shrinks it when 0 < k < 1). The inverse of a linear function undoes it: swap the roles of x and y and solve, and remember that (a, b) on f means (b, a) on f⁻¹. Traps: x − h moves right, not left; f⁻¹ is not 1 ÷ f; undo steps in reverse order.

Key formulas
Arithmetic sequencean=a1+d(n−1),an=an−1+da_n=a_1+d(n-1),\qquad a_n=a_{n-1}+d
Geometric sequencean=a1 r n−1,an=r an−1a_n=a_1\,r^{\,n-1},\qquad a_n=r\,a_{n-1}
Translationsy=f(x−h)+k: right h, up ky=f(x-h)+k:\ \text{right }h,\ \text{up }k
Reflection and stretchy=−f(x) (over the x-axis),y=k f(x) (vertical stretch if k>1, shrink if 0<k<1)y=-f(x)\ \text{(over the }x\text{-axis)},\quad y=k\,f(x)\ \text{(vertical stretch if }k>1\text{, shrink if }0<k<1)
Inverse of a linear functionf(x)=mx+b ⇒ f−1(x)=x−bm(m≠0)f(x)=mx+b\ \Rightarrow\ f^{-1}(x)=\dfrac{x-b}{m}\quad(m\ne 0)

Explicit rule for an arithmetic sequence

Method. For an arithmetic sequence, aₙ = a₁ + d(n − 1).

Worked example. An arithmetic sequence has first term 7 and common difference 4. What is the 20th term? Type your answer as a whole number.

    Answer83 (accepted: 83)
    Step-by-step
    1. The explicit rule is aₙ = 7 + 4(n − 1).
    2. For n = 20: a₂₀ = 7 + 4(19) = 7 + 76 = 83.
    Fast methodStart at the first term and add the difference 19 times.
    Quick checkCheck: the terms go 7, 11, 15, …; 83 − 7 = 76 = 19 × 4 ✓.

    Translating an absolute value graph

    Method. For y = f(x − h) + k, the graph of f moves right h units and up k units.

    Worked example. The function g is defined by g(x) = |x − 2| + 3. The graph of g is a translation of the graph of y = |x|. What are the coordinates of the vertex of the graph of g?

    • (A) (2, 3)
    • (B) (−2, 3)
    • (C) (3, 2)
    • (D) (−2, −3)
    AnswerA — (2, 3)
    Step-by-step
    1. The vertex of y = |x| is (0, 0).
    2. Replacing x with x − 2 shifts the graph right 2 units; adding 3 shifts it up 3 units.
    3. So the vertex moves to (2, 3).
    Fast methodVertex of |x − h| + k is (h, k).
    Quick checkCheck: g(2) = |0| + 3 = 3, and g(x) ≥ 3 for every x ✓.
    Why the other choices are wrong
    • B ((−2, 3)): moved left because of the minus sign; x − 2 moves the graph right 2
    • C ((3, 2)): swapped the horizontal and vertical shifts
    • D ((−2, −3)): reversed both shifts

    Points on the graph of an inverse

    Method. (p, q) is on the graph of f exactly when (q, p) is on the graph of f⁻¹.

    Worked example. The function f is defined by f(x) = 4x − 7. The point (a, 5) lies on the graph of f⁻¹, the inverse of f. What is the value of a?

    • (A) 3
    • (B) 27
    • (C) 1/13
    • (D) 13
    AnswerD — 13
    Step-by-step
    1. If (a, 5) is on the graph of f⁻¹, then (5, a) is on the graph of f, because an inverse swaps inputs and outputs.
    2. So a = f(5) = 4(5) − 7 = 13.
    Fast methodSwap the coordinates and use f.
    Quick checkCheck: f⁻¹(x) = (x + 7) ÷ 4, and f⁻¹(13) = 20 ÷ 4 = 5 ✓.
    Why the other choices are wrong
    • A (3): solved f(x) = 5, which finds f⁻¹(5), not the input of f⁻¹ that gives 5
    • B (27): added 7 instead of subtracting: 4(5) + 7 = 27
    • C (1/13): took the reciprocal of f(5) = 13, confusing f⁻¹ with 1/f

    Linear and Exponential Models

    Linear functions change by equal differences over equal intervals: the same amount is added each step. Exponential functions change by equal factors: the same percent is gained or lost each step. In a table, check the differences and the ratios. Write a linear model from a rate and a starting value, and an exponential model from a starting value and a growth factor (for example, doubling every 3 hours gives 2t/3^{t/3}). In context, the constant in a linear model is the starting value and the coefficient is the rate; in a(b)t^{t}, a is the starting value and b is the factor kept or gained each period. A quantity growing by a constant percent eventually passes any quantity growing by a constant amount.

    Key formulas
    Linear modely=mx+b(m=rate, b=start)y=mx+b\quad(m=\text{rate},\ b=\text{start})
    Exponential modely=a bx(a=start, b=factor per step)y=a\,b^{x}\quad(a=\text{start},\ b=\text{factor per step})
    Percent rateb=1+r (growth),b=1−r (decay)b=1+r\ \text{(growth)},\qquad b=1-r\ \text{(decay)}
    Repeated perioddoubles every p units: y=a⋅2t/p\text{doubles every }p\text{ units: } y=a\cdot 2^{t/p}
    Equal factorsf(x+1)=b f(x) for f(x)=a bxf(x+1)=b\,f(x)\ \text{for } f(x)=a\,b^{x}

    Linear or exponential from a table

    Method. Linear functions change by equal differences over equal intervals; exponential functions change by equal factors.

    Worked example. A table shows these values of y for x = 0, 1, 2 and 3: y = 5, 15, 45 and 135. Which statement describes the relationship?

    • (A) It is linear, because y increases by 10 when x goes from 0 to 1.
    • (B) It is linear, because y changes by the same factor each time x increases by 1.
    • (C) It is exponential, because y is multiplied by 3 each time x increases by 1.
    • (D) It is exponential, because y increases by 10 each time x increases by 1.
    AnswerC — It is exponential, because y is multiplied by 3 each time x increases by 1.
    Step-by-step
    1. Differences: 15 − 5 = 10, 45 − 15 = 30, 135 − 45 = 90. They are not equal, so it is not linear.
    2. Ratios: 15 ÷ 5 = 3, 45 ÷ 15 = 3, 135 ÷ 45 = 3. Equal ratios mean exponential.
    3. y = 5(3)x^{x}.
    Fast methodEqual differences → linear; equal ratios → exponential.
    Quick checkCheck: 5 × 3³ = 135 ✓.
    Why the other choices are wrong
    • A (It is linear, because y increases by 10 when x goes from 0 to 1.): looked only at the first difference; the next differences are 30 and 90
    • B (It is linear, because y changes by the same factor each time x increases by 1.): mixed up the rules: a constant factor means exponential, not linear
    • D (It is exponential, because y increases by 10 each time x increases by 1.): gave the right type for a wrong reason; equal differences would make it linear

    Writing an exponential function from two points

    Method. For y = a(b)x^{x}, a is the value at x = 0 and b is the factor for each increase of 1 in x.

    Worked example. An exponential function of the form y = a(b)x^{x} passes through the points (0, 6) and (2, 54). Which equation represents the function?

    • (A) y = 6(3)x^{x}
    • (B) y = 6(9)x^{x}
    • (C) y = 24x + 6
    • (D) y = 3(6)x^{x}
    AnswerA — y = 6(3)x^{x}
    Step-by-step
    1. At x = 0, y = a(b)⁰ = a, so a = 6.
    2. At x = 2: 6b² = 54, so b² = 9 and b = 3 (b must be positive).
    3. The function is y = 6(3)x^{x}.
    Fast methodStarting value from x = 0, then the factor per step.
    Quick checkCheck: 6 × 3² = 54 ✓.
    Why the other choices are wrong
    • B (y = 6(9)x^{x}): used the total factor 54 ÷ 6 = 9 for one step, but it covers 2 steps
    • C (y = 24x + 6): wrote a linear function through the two points instead of an exponential one
    • D (y = 3(6)x^{x}): swapped the starting value and the growth factor

    Exponential growth overtaking linear growth

    Method. Exponential growth eventually exceeds linear growth; find the crossover by comparing values year by year.

    Worked example. Two savings plans each start with $1,000. In Plan A, the balance after t years is A(t) = 1,000 + 150t. In Plan B, the balance is B(t) = 1,000(1.1)t^{t}. After how many whole years will Plan B first have a greater balance than Plan A? Type your answer as a whole number.

      Answer9 (accepted: 9)
      Step-by-step
      1. Part A: compare year by year. After 8 years: A(8) = 1,000 + 1,200 = 2,200 and B(8) = 1,000(1.1)⁸ ≈ 2,143.59, so A is still greater.
      2. Part B: after 9 years: A(9) = 2,350 and B(9) = 1,000(1.1)⁹ ≈ 2,357.95, so B is greater.
      3. Plan B first has the greater balance after 9 years. A quantity growing by a constant percent eventually passes one growing by a constant amount.
      Fast methodUse a table on the calculator and look for the first year B(t) > A(t).
      Quick checkCheck: B(9) − A(9) ≈ 7.95 > 0 and B(8) − A(8) ≈ −56.41 < 0 ✓.

      07.04 Geometry (Grade 10)

      This topic covers the Geometry standards on the grade 10 MCAS: rigid motions, congruence, proofs about lines, angles, triangles and parallelograms, polygon angles and constructions (G-CO); dilations, similarity, the Pythagorean theorem and right-triangle trigonometry (G-SRT); circle angles, arc length, sector area and radians (G-C); circle equations, parabolas from a focus and directrix, and coordinate proofs, slopes, partitions, perimeters and areas (G-GPE); and volumes of cylinders, pyramids, cones and spheres (G-GMD). Geometry is about 35% of the grade 10 points, the largest reporting category. The real grade 10 MCAS Mathematics test is given on a computer in two untimed sessions (DESE recommends about 1½ to 2 hours each) with 42 scored items, including 4 constructed-response questions; Session 1 allows no calculator, and Session 2 allows a scientific or graphing calculator (TI or Desmos). You get the grade 10 reference sheet, which includes area and volume formulas, the Pythagorean theorem, the trigonometric ratios and the special right triangles. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator match Session 2; the others should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.

      Transformations, Congruence and Constructions

      Rigid motions (translations, reflections and rotations) move a figure without changing its size or shape, so they keep lengths and angle measures. Learn the coordinate rules and apply a sequence of motions one step at a time, in the order given. Two figures are congruent when a sequence of rigid motions maps one onto the other; for triangles, SSS, SAS, ASA and AAS prove congruence, but SSA and AAA do not. Know the angle facts that come from these ideas: vertical angles are equal, a transversal across parallel lines makes equal alternate interior and corresponding angles, the angles of a triangle add to 180°, base angles of an isosceles triangle are equal, and opposite angles of a parallelogram are equal while consecutive angles are supplementary. For polygons, the interior angles add to (n − 2) × 180° and the exterior angles of a convex polygon (one at each vertex) always add to 360°. Constructions with a compass and straightedge (copying an angle, bisecting a segment or angle, drawing perpendicular and parallel lines) are justified by these same theorems. Common traps: rotating clockwise when the question says counterclockwise, using a theorem in the wrong direction (a theorem instead of its converse), and confusing an included side with a non-included one.

      Key formulas
      Reflectionsrx-axis:(x,y)→(x,−y),ry-axis:(x,y)→(−x,y),ry=x:(x,y)→(y,x)r_{x\text{-axis}}:(x,y)\to(x,-y),\quad r_{y\text{-axis}}:(x,y)\to(-x,y),\quad r_{y=x}:(x,y)\to(y,x)
      Rotations about the origin (counterclockwise)R90∘:(x,y)→(−y,x),R180∘:(x,y)→(−x,−y),R270∘:(x,y)→(y,−x)R_{90^\circ}:(x,y)\to(-y,x),\quad R_{180^\circ}:(x,y)\to(-x,-y),\quad R_{270^\circ}:(x,y)\to(y,-x)
      TranslationTa,b:(x,y)→(x+a, y+b)T_{a,b}:(x,y)\to(x+a,\,y+b)
      Polygon anglesinterior sum=(n−2)⋅180∘,exterior sum (convex)=360∘\text{interior sum}=(n-2)\cdot180^\circ,\qquad \text{exterior sum (convex)}=360^\circ
      Exterior angle of a trianglem∠ext=m∠1+m∠2 (remote interior angles)m\angle_{\text{ext}}=m\angle_1+m\angle_2\ (\text{remote interior angles})

      Reflection on the coordinate plane (G-CO.A.2, G-CO.A.5)

      Method. For a reflection, the line of reflection is the perpendicular bisector of each segment from a point to its image.

      Worked example. Point P(3, −5) is reflected across the y-axis. What are the coordinates of its image, P′?

      • (A) (−3, −5)
      • (B) (3, 5)
      • (C) (5, 3)
      • (D) (−3, 5)
      AnswerA — (−3, −5)
      Step-by-step
      1. A reflection across the y-axis keeps the y-coordinate and changes the sign of the x-coordinate: (x, y) → (−x, y).
      2. So P(3, −5) → P′(−3, −5).
      Fast methodAcross the y-axis: only x changes sign.
      Quick checkCheck: P and P′ are both 3 units from the y-axis, on opposite sides, at the same height y = −5 ✓.
      Why the other choices are wrong
      • B ((3, 5)): reflected across the x-axis instead (changed the sign of y)
      • C ((5, 3)): swapped and changed signs as in a 90° rotation
      • D ((−3, 5)): changed both signs, which is a 180° rotation about the origin

      Interior angles of a regular polygon (G-CO.C.11a)

      Method. Interior angle of a regular n-gon = (n − 2) × 180° ÷ n, or 180° minus the exterior angle 360° ÷ n.

      Worked example. A stop sign is shaped like a regular octagon. What is the measure of each interior angle of a regular octagon?

      • (A) 45°
      • (B) 135°
      • (C) 1080°
      • (D) 157.5°
      AnswerB — 135°
      Step-by-step
      1. The interior angles of an n-sided polygon add to (n − 2) × 180°.
      2. For n = 8: (8 − 2) × 180° = 1,080°.
      3. A regular octagon has 8 equal angles, so each one is 1,080° ÷ 8 = 135°.
      Fast methodEach exterior angle is 360° ÷ 8 = 45°, and interior = 180° − 45° = 135°.
      Quick checkCheck: 8 × 135° = 1,080° = 6 × 180° ✓.
      Why the other choices are wrong
      • A (45°): found the exterior angle, 360° ÷ 8, instead of the interior angle
      • C (1080°): found the sum of all the interior angles and did not divide by 8
      • D (157.5°): used (n − 1) × 180° instead of (n − 2) × 180° for the angle sum

      Sequence of rigid motions (G-CO.A.5)

      Method. Do the motions one at a time, in the stated order, writing the image after each.

      Worked example. Point A(4, −1) is rotated 90° counterclockwise about the origin. The image is then translated by the rule (x, y) → (x − 2, y + 3). What are the coordinates of the final image?

      • (A) (−3, −1)
      • (B) (−2, 2)
      • (C) (−1, 7)
      • (D) (−3, 7)
      AnswerC — (−1, 7)
      Step-by-step
      1. Step 1 (rotation): a 90° counterclockwise rotation about the origin maps (x, y) → (−y, x).
      2. A(4, −1) → (1, 4).
      3. Step 2 (translation): subtract 2 from x and add 3 to y: (1, 4) → (−1, 7).
      4. The order matters: the rotation is done first because it is listed first.
      Fast methodApply each rule in the order given; write the point after every step.
      Quick checkCheck: (4, −1) is in Quadrant IV and (1, 4) is in Quadrant I, one quarter-turn counterclockwise; the segment from the origin to (4, −1) has slope −1/4 and the segment to (1, 4) has slope 4, and (−1/4)(4) = −1, so they are perpendicular, and both points are √17 from the origin ✓.
      Why the other choices are wrong
      • A ((−3, −1)): rotated 90° clockwise, (x, y) → (y, −x), instead of counterclockwise
      • B ((−2, 2)): did the translation first and the rotation second
      • D ((−3, 7)): used (x, y) → (y, x) for the rotation, which is a reflection across y = x

      Similarity, Right Triangles and Trigonometry

      A dilation with center O and scale factor k multiplies every distance from O by k; it keeps angles but changes lengths (k > 1 enlarges, 0 < k < 1 shrinks), and a line not through the center maps to a parallel line. Figures are similar when a dilation and rigid motions map one onto the other; for triangles, two pairs of equal angles (AA) are enough. In similar figures, matching sides are in the same ratio, which is how you solve shadow, map and model problems and the triangle proportionality theorem (a line parallel to one side divides the other two sides proportionally). In a right triangle, label the sides opposite, adjacent and hypotenuse from the angle you are using, then pick sine, cosine or tangent; use the inverse functions (sin⁻¹, cos⁻¹, tan⁻¹) to find an angle. The sine of an angle equals the cosine of its complement. The grade 10 reference sheet gives the Pythagorean theorem, the trigonometric ratios and the 45°-45°-90° and 30°-60°-90° triangles; set your calculator to degrees in Session 2. Common traps: using the wrong ratio, dividing when you should multiply, inverting a proportion, and angles of depression (they equal the angle of elevation from the other end).

      Key formulas
      Dilation about the originDk:(x,y)→(kx, ky)D_k:(x,y)\to(kx,\,ky)
      Trigonometric ratiossin⁡A=opphyp,cos⁡A=adjhyp,tan⁡A=oppadj\sin A=\frac{\text{opp}}{\text{hyp}},\quad \cos A=\frac{\text{adj}}{\text{hyp}},\quad \tan A=\frac{\text{opp}}{\text{adj}}
      Complementary anglessin⁡A=cos⁡(90∘−A)\sin A=\cos(90^\circ-A)
      Pythagorean theorema2+b2=c2a^2+b^2=c^2
      Special right triangles45∘-45∘-90∘: x, x, x230∘-60∘-90∘: x, x3, 2x45^\circ\text{-}45^\circ\text{-}90^\circ:\ x,\ x,\ x\sqrt{2}\qquad 30^\circ\text{-}60^\circ\text{-}90^\circ:\ x,\ x\sqrt{3},\ 2x
      Triangle proportionalityDE∥BC ⇒ ADDB=AEECDE\parallel BC\ \Rightarrow\ \frac{AD}{DB}=\frac{AE}{EC}

      Dilation about the origin (G-SRT.A.1)

      Method. Centered at the origin, a dilation multiplies every coordinate by k.

      Worked example. Point B(6, −4) is dilated by a scale factor of 1/2 with the center of dilation at the origin. What are the coordinates of B′?

      • (A) (12, −8)
      • (B) (8, −2)
      • (C) (5.5, −4.5)
      • (D) (3, −2)
      AnswerD — (3, −2)
      Step-by-step
      1. A dilation centered at the origin with scale factor k maps (x, y) → (kx, ky).
      2. With k = 1/2: (1/2 × 6, 1/2 × (−4)) = (3, −2).
      Fast methodMultiply both coordinates by the scale factor.
      Quick checkCheck: B′ is on the line through the origin and B, and OB′ = √13 is half of OB = √52 = 2√13 ✓.
      Why the other choices are wrong
      • A ((12, −8)): multiplied by 2 instead of 1/2
      • B ((8, −2)): added 2 to each coordinate instead of multiplying
      • C ((5.5, −4.5)): subtracted 1/2 from each coordinate instead of multiplying

      Using sine in a right triangle (G-SRT.C.8)

      Method. Label opposite, adjacent and hypotenuse from the given angle, then choose sine, cosine or tangent (SOH-CAH-TOA).

      Worked example. A 15-foot ladder leans against a vertical wall. The ladder makes a 70° angle with the level ground. To the nearest tenth of a foot, how high up the wall does the top of the ladder reach?

      • (A) 14.1 feet
      • (B) 5.1 feet
      • (C) 41.2 feet
      • (D) 16.0 feet
      AnswerA — 14.1 feet
      Step-by-step
      1. The ladder is the hypotenuse (15 ft). The height on the wall is the side opposite the 70° angle.
      2. sin 70° = opposite ÷ hypotenuse, so height = 15 × sin 70°.
      3. 15 × sin 70° ≈ 15 × 0.9397 ≈ 14.10, which is 14.1 feet.
      Fast methodOpposite and hypotenuse → SOH → multiply the hypotenuse by sin 70°.
      Quick checkCheck: the base is 15 cos 70° ≈ 5.13 ft, and 5.13² + 14.10² ≈ 26.3 + 198.8 ≈ 225 = 15² ✓.
      Why the other choices are wrong
      • B (5.1 feet): used cosine, which gives the distance from the wall to the foot of the ladder
      • C (41.2 feet): used tangent with the ladder length as the adjacent side
      • D (16.0 feet): divided by sin 70° instead of multiplying

      Similar right triangles from the altitude (G-SRT.B.5)

      Method. Prove the triangles similar first (AA), then write a proportion of matching sides.

      Worked example. In right triangle ABC, the right angle is at C. The altitude from C meets the hypotenuse AB at point D. AD = 4 centimeters and DB = 9 centimeters. What is the length of the altitude CD?

      • (A) 6.5 centimeters
      • (B) 6 centimeters
      • (C) 13 centimeters
      • (D) 36 centimeters
      AnswerB — 6 centimeters
      Step-by-step
      1. The altitude to the hypotenuse makes two smaller right triangles, ACD and CBD, that are similar to each other (AA: each has a right angle, and ∠A and ∠BCD are both complements of ∠B).
      2. Matching sides: AD ÷ CD = CD ÷ DB.
      3. So CD² = AD × DB = 4 × 9 = 36, and CD = 6 cm.
      Fast methodThe altitude to the hypotenuse is the geometric mean of the two pieces: √(4 × 9).
      Quick checkCheck: AC² = 4² + 6² = 52 and BC² = 9² + 6² = 117; 52 + 117 = 169 = 13² = AB² ✓.
      Why the other choices are wrong
      • A (6.5 centimeters): averaged AD and DB instead of using similar triangles
      • C (13 centimeters): added AD and DB, which gives the hypotenuse AB
      • D (36 centimeters): found CD² = 4 × 9 = 36 but forgot to take the square root

      Circles: Angles, Arcs, Sectors and Equations

      All circles are similar. A central angle equals its arc; an inscribed angle is half its arc, so an angle inscribed in a semicircle is a right angle. A radius drawn to a point of tangency is perpendicular to the tangent, and two tangent segments from the same outside point are equal. The opposite angles of a quadrilateral inscribed in a circle are supplementary. Arc length and sector area are the same fraction of the circumference and of the area as the central angle is of 360°. A radian is the angle whose arc equals the radius, so θ (in radians) = arc length ÷ radius. A circle with center (h, k) and radius r has the equation (x − h)² + (y − k)² = r²; if the equation is expanded, complete the square in x and in y to find the center and radius. Common traps: forgetting to halve for an inscribed angle, mixing up arc length (uses 2πr) with sector area (uses πr²), keeping the signs of h and k inside the parentheses, and forgetting to square (or take the square root of) the radius. Arc length and sector area may not be on the reference sheet, so learn them.

      Key formulas
      Inscribed anglem∠inscribed=12 mAB⌢m\angle_{\text{inscribed}}=\tfrac{1}{2}\,m\overset{\frown}{AB}
      Arc lengths=θ360∘⋅2πr(s=rθ with θ in radians)s=\frac{\theta}{360^\circ}\cdot 2\pi r\qquad (s=r\theta\ \text{with } \theta \text{ in radians})
      Sector areaA=θ360∘⋅πr2A=\frac{\theta}{360^\circ}\cdot \pi r^2
      Equation of a circle(x−h)2+(y−k)2=r2(x-h)^2+(y-k)^2=r^2
      Inscribed quadrilateralm∠A+m∠C=180∘,m∠B+m∠D=180∘m\angle A+m\angle C=180^\circ,\quad m\angle B+m\angle D=180^\circ

      Inscribed angle and its arc (G-C.A.2)

      Method. Central angle = arc; inscribed angle = half the arc.

      Worked example. In a circle, inscribed angle ∠PQR intercepts arc PR, which measures 110°. What is m∠PQR?

      • (A) 110°
      • (B) 220°
      • (C) 55°
      • (D) 70°
      AnswerC — 55°
      Step-by-step
      1. An inscribed angle has its vertex on the circle.
      2. Its measure is half the measure of its intercepted arc: 110° ÷ 2 = 55°.
      Fast methodInscribed angle = ½ × arc.
      Quick checkCheck: the central angle on the same arc is 110°, which is twice 55° ✓.
      Why the other choices are wrong
      • A (110°): made the inscribed angle equal to its arc, which is true only for a central angle
      • B (220°): doubled the arc instead of halving it
      • D (70°): subtracted the arc from 180°

      Arc length (G-C.B.5)

      Method. Arc length is the same fraction of the circumference as the central angle is of 360°.

      Worked example. A circle has a radius of 9 inches. A central angle of 80° intercepts an arc. What is the length of the arc, in terms of π?

      • (A) 18π inches
      • (B) 2π inches
      • (C) 8π inches
      • (D) 4π inches
      AnswerD — 4π inches
      Step-by-step
      1. The arc is 80/360 = 2/9 of the whole circle.
      2. Circumference = 2πr = 2π(9) = 18π inches.
      3. Arc length = 2/9 × 18π = 4π inches.
      Fast methodArc length = (angle ÷ 360°) × 2πr.
      Quick checkCheck: 4π ÷ 18π = 2/9 and 2/9 × 360° = 80° ✓.
      Why the other choices are wrong
      • A (18π inches): found the sector area, πr² × 80/360, instead of the arc length
      • B (2π inches): used πr instead of 2πr for the whole circumference
      • C (8π inches): used the diameter, 18, in place of the radius in 2πr

      Center and radius by completing the square (G-GPE.A.1)

      Method. Complete the square in x and in y to reach (x − h)² + (y − k)² = r².

      Worked example. The equation of a circle is x² + y² − 6x + 10y − 2 = 0. What are the center and the radius of the circle?

      • (A) center (3, −5), radius 6
      • (B) center (−3, 5), radius 6
      • (C) center (3, −5), radius √2
      • (D) center (3, −5), radius 36
      AnswerA — center (3, −5), radius 6
      Step-by-step
      1. Group and move the constant: (x² − 6x) + (y² + 10y) = 2.
      2. Complete each square: add (−6 ÷ 2)² = 9 and (10 ÷ 2)² = 25 to both sides.
      3. (x − 3)² + (y + 5)² = 2 + 9 + 25 = 36.
      4. Center (3, −5); radius √36 = 6.
      Fast methodCenter = (−half of the x-coefficient, −half of the y-coefficient) = (3, −5).
      Quick checkCheck: (3, 1) should be on the circle (6 above the center): 9 + 1 − 18 + 10 − 2 = 0 ✓.
      Why the other choices are wrong
      • B (center (−3, 5), radius 6): used the signs of −6x and +10y directly instead of reversing them
      • C (center (3, −5), radius √2): used the constant 2 as r² without adding 9 and 25 when completing the square
      • D (center (3, −5), radius 36): found r² = 36 and did not take the square root

      Coordinate Geometry, Parabolas and Volume

      Use coordinates to prove and measure. Parallel lines have equal slopes; perpendicular lines have slopes whose product is −1 (opposite reciprocals). Use the distance formula (the Pythagorean theorem on the grid) to find lengths, perimeters and areas, and use slopes and lengths together to classify triangles and quadrilaterals. To find the point that divides a segment in the ratio a : b, move a/(a + b) of the way from the first endpoint. A parabola is the set of points equally far from a focus and a directrix; the vertex is halfway between them, p is the vertex-to-focus distance, and when the directrix is a horizontal line, the equation is (x − h)² = 4p(y − k), opening toward the focus (p is negative if the focus is below the directrix). For solids, the reference sheet gives the volumes of a prism, cylinder, pyramid, cone and sphere; a cone or pyramid holds one-third of the matching cylinder or prism (Cavalieri's principle says solids with equal heights and equal cross-sections at every level have equal volumes). Common traps: forgetting the 1/3, using the diameter for r, using r² where r³ is needed, and confusing a ratio a : b with the fraction a/b.

      Key formulas
      Slope and distancem=y2−y1x2−x1,d=(x2−x1)2+(y2−y1)2m=\frac{y_2-y_1}{x_2-x_1},\qquad d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}
      Parallel and perpendicularm1=m2 (∥),m1⋅m2=−1 (⊥)m_1=m_2\ (\parallel),\qquad m_1\cdot m_2=-1\ (\perp)
      Partition point (ratio a : b from A)P=(x1+aa+b(x2−x1), y1+aa+b(y2−y1))P=\left(x_1+\tfrac{a}{a+b}(x_2-x_1),\ y_1+\tfrac{a}{a+b}(y_2-y_1)\right)
      Parabola from focus and directrix(x−h)2=4p (y−k)(x-h)^2=4p\,(y-k)
      VolumesVcyl=πr2h,Vcone=13πr2h,Vpyr=13Bh,Vsph=43πr3V_{\text{cyl}}=\pi r^2h,\quad V_{\text{cone}}=\tfrac{1}{3}\pi r^2h,\quad V_{\text{pyr}}=\tfrac{1}{3}Bh,\quad V_{\text{sph}}=\tfrac{4}{3}\pi r^3

      Partitioning a segment in a ratio (G-GPE.B.6)

      Method. Turn the ratio a : b into the fraction a/(a + b) of the way from the first endpoint.

      Worked example. Point P is on segment AB with A(−2, 1) and B(10, 13). P divides AB so that AP : PB = 1 : 3. What are the coordinates of P?

      • (A) (2, 5)
      • (B) (1, 4)
      • (C) (4, 7)
      • (D) (7, 10)
      AnswerB — (1, 4)
      Step-by-step
      1. AP : PB = 1 : 3 means the segment has 1 + 3 = 4 equal parts and P is 1 part from A, so P is 1/4 of the way from A to B.
      2. Change from A to B: x changes by 10 − (−2) = 12; y changes by 13 − 1 = 12.
      3. P = (−2 + 1/4 × 12, 1 + 1/4 × 12) = (1, 4).
      Fast methodP = A + (part ÷ total) × (B − A).
      Quick checkCheck: AP = √(9 + 9) = 3√2 and PB = √(81 + 81) = 9√2; 3√2 : 9√2 = 1 : 3 ✓.
      Why the other choices are wrong
      • A ((2, 5)): used the fraction 1/3 instead of 1/4 (the ratio 1 : 3 means 1 part out of 4)
      • C ((4, 7)): found the midpoint, which is the ratio 1 : 1
      • D ((7, 10)): measured 1/4 of the way from B instead of from A

      Volume of a cone (G-GMD.A.3)

      Method. Substitute into the reference-sheet formula; square the radius before multiplying.

      Worked example. A paper cup is shaped like a cone with a radius of 3 centimeters and a height of 8 centimeters. What is the volume of the cup, in terms of π?

      • (A) 72π cubic centimeters
      • (B) 8π cubic centimeters
      • (C) 24π cubic centimeters
      • (D) 96π cubic centimeters
      AnswerC — 24π cubic centimeters
      Step-by-step
      1. The reference sheet gives V = (1/3)πr²h for a cone.
      2. V = (1/3)π(3²)(8) = (1/3)π(72) = 24π cubic centimeters.
      Fast methodA cone holds one-third of the cylinder with the same base and height: 72π ÷ 3.
      Quick checkCheck: 24π × 3 = 72π = π(9)(8), the matching cylinder ✓.
      Why the other choices are wrong
      • A (72π cubic centimeters): forgot the 1/3 and found the volume of a cylinder
      • B (8π cubic centimeters): used r instead of r² in the formula
      • D (96π cubic centimeters): used the diameter, 6, in place of the radius

      Parabola from a focus and directrix (G-GPE.A.2)

      Method. Set distance to the focus equal to distance to the directrix, square, and simplify.

      Worked example. A parabola has its focus at (0, 3) and its directrix is the line y = −3. Which equation represents the parabola?

      • (A) y = x²/3
      • (B) y = x²/6
      • (C) y = −x²/12
      • (D) y = x²/12
      AnswerD — y = x²/12
      Step-by-step
      1. Every point (x, y) on the parabola is the same distance from the focus as from the directrix.
      2. Distance to focus: √(x² + (y − 3)²). Distance to y = −3: |y + 3|.
      3. Square both: x² + (y − 3)² = (y + 3)², so x² + y² − 6y + 9 = y² + 6y + 9.
      4. x² = 12y, so y = x²/12.
      Fast methodThe vertex is halfway between focus and directrix, (0, 0), and p = 3 is the vertex-to-focus distance; x² = 4py = 12y.
      Quick checkCheck: (6, 3) is on y = x²/12; its distance to the focus is 6 and to y = −3 is 6 ✓.
      Why the other choices are wrong
      • A (y = x²/3): used p = 3 alone instead of 4p = 12 in x² = 4py
      • B (y = x²/6): used the focus-to-directrix distance, 6, in place of 4p
      • C (y = −x²/12): made the parabola open downward, away from the focus

      07.05 Statistics and Probability (Grade 10)

      This topic covers grade 10 Statistics and Probability (S-ID.1–3, 5–9 and S-CP.1–7): describing and comparing data sets by shape, center and spread, two-way tables and relative frequencies, scatter plots with lines of fit, residuals and correlation, correlation versus causation, and probability with unions, independence and conditional probability. This category is about 15% of the points on the grade 10 MCAS Mathematics test. The real test is given in two untimed sessions (DESE recommends about 1½–2 hours each) with 42 scored items, including 4 constructed-response questions; Session 1 allows no calculator, Session 2 allows a scientific calculator, a TI graphing calculator or Desmos, and you get the grade 10 reference sheet. On the real test some of these skills appear as hand-scored constructed-response questions worth 4 points, where you must show your work and explain; the multi-step items here lay out their solutions as Part A, Part B and Part C to build that habit. Items marked calculator are Session 2 style; the rest should be done without one. The real test has no time limit; aim for about 3½ minutes per question as a practice target.

      Center, Spread and Shape of Data

      Describe a data set by its shape (symmetric, skewed left or skewed right, outliers), its center (mean or median) and its spread (range, interquartile range or standard deviation). Use the median and IQR when the data are skewed or have outliers, because they resist extreme values; use the mean and standard deviation when the data are roughly symmetric. Common traps: forgetting to order the data before finding a median or quartiles, mixing up the range and the IQR, and thinking that adding a constant changes the spread (it moves only the center). A standard deviation is found with a calculator; on the test you mainly compare or interpret it.

      Key formulas
      Meanxˉ=x1+x2+⋯+xnn\bar{x}=\dfrac{x_1+x_2+\cdots+x_n}{n}
      Interquartile rangeIQR=Q3−Q1\text{IQR}=Q_3-Q_1
      Outlier fences (1.5 × IQR rule)Q1−1.5⋅IQRandQ3+1.5⋅IQRQ_1-1.5\cdot\text{IQR}\quad\text{and}\quad Q_3+1.5\cdot\text{IQR}
      Total from a meantotal=xˉ⋅n\text{total}=\bar{x}\cdot n
      Skew and centerskewed right: usually mean>median; skewed left: usually mean<median\text{skewed right: usually mean}>\text{median};\ \text{skewed left: usually mean}<\text{median}

      Choosing a measure of center (S-ID.A.2, S-ID.A.3)

      Method. When data have an outlier or are skewed, the median describes the center better than the mean.

      Worked example. The sale prices of five houses on one street in Quincy were $310,000, $325,000, $340,000, $355,000 and $1,200,000. Which measure of center best describes a typical sale price on this street, and what is its value?

      • (A) The median, $340,000
      • (B) The mean, $506,000
      • (C) The mean, $340,000
      • (D) The median, $332,500
      AnswerA — The median, $340,000
      Step-by-step
      1. The prices in order are 310, 325, 340, 355 and 1,200 (thousands of dollars). The price $1,200,000 is far from the others, so it is an outlier.
      2. The mean is (310 + 325 + 340 + 355 + 1,200) ÷ 5 = 2,530 ÷ 5 = 506 thousand, which is higher than four of the five prices.
      3. The median is the middle value, 340 thousand. The median is not pulled by the outlier, so it describes a typical price better.
      Fast methodWith an outlier, use the median; it is the middle value of the ordered list.
      Quick checkCheck: two prices are below $340,000 and two are above ✓.
      Why the other choices are wrong
      • B (The mean, $506,000): chose the mean, which the outlier $1,200,000 pulls far above the other four prices
      • C (The mean, $340,000): found the middle value but called it the mean
      • D (The median, $332,500): dropped the outlier and then took the median of the other four prices

      Effect of removing an outlier (S-ID.A.3)

      Method. Recompute the mean and median with and without the extreme value and compare.

      Worked example. The data set 12, 14, 15, 15, 16, 18, 40 lists the numbers of minutes seven students waited for a bus. The value 40 is removed. Which statement describes the change?

      • (A) Both the mean and the median decrease.
      • (B) The mean decreases and the median stays the same.
      • (C) The mean stays the same and the median decreases.
      • (D) The mean decreases and the standard deviation increases.
      AnswerB — The mean decreases and the median stays the same.
      Step-by-step
      1. Before: the mean is 130 ÷ 7 ≈ 18.6 and the median (4th of 7 values) is 15.
      2. After removing 40: the six values are 12, 14, 15, 15, 16, 18. The mean is 90 ÷ 6 = 15 and the median is (15 + 15) ÷ 2 = 15.
      3. So the mean drops from about 18.6 to 15, and the median stays at 15. The standard deviation also decreases, because the far-away value is gone.
      Fast methodAn outlier pulls the mean and the standard deviation; the median barely moves.
      Quick checkCheck: 12 + 14 + 15 + 15 + 16 + 18 = 90 and 90 ÷ 6 = 15 ✓.
      Why the other choices are wrong
      • A (Both the mean and the median decrease.): assumed the median moves the same way the mean does
      • C (The mean stays the same and the median decreases.): swapped which measure is resistant to outliers
      • D (The mean decreases and the standard deviation increases.): thought removing a value always makes the data more spread out

      Testing for an outlier with the 1.5 × IQR rule (S-ID.A.2, S-ID.A.3)

      Method. Outlier fences are Q1 − 1.5 × IQR and Q3 + 1.5 × IQR; a value beyond a fence is an outlier.

      Worked example. The numbers of push-ups 11 students did in one minute were 4, 12, 13, 14, 15, 16, 17, 18, 19, 20 and 31. A value is an outlier if it is more than 1.5 × IQR above the third quartile or more than 1.5 × IQR below the first quartile. Is 31 an outlier, and what is the upper fence (Q3 + 1.5 × IQR)?

      • (A) No; the upper fence is 59.5.
      • (B) Yes; the upper fence is 25.
      • (C) Yes; the upper fence is 28.
      • (D) No; the upper fence is 47.5.
      AnswerC — Yes; the upper fence is 28.
      Step-by-step
      1. Part A: The data are already in order. The median (6th value) is 16. The lower half 4, 12, 13, 14, 15 has median Q1 = 13. The upper half 17, 18, 19, 20, 31 has median Q3 = 19.
      2. Part B: IQR = Q3 − Q1 = 19 − 13 = 6, so 1.5 × IQR = 9. The upper fence is 19 + 9 = 28.
      3. Part C: 31 > 28, so 31 is an outlier. (The lower fence is 13 − 9 = 4; 4 is not less than 4, so 4 is not an outlier.)
      Fast methodFind Q1 and Q3, multiply the IQR by 1.5, and add it to Q3.
      Quick checkCheck: 28 − 19 = 9 = 1.5 × 6 ✓.
      Why the other choices are wrong
      • A (No; the upper fence is 59.5.): used the range, 31 − 4 = 27, instead of the IQR: 19 + 1.5 × 27 = 59.5
      • B (Yes; the upper fence is 25.): added 1.5 × IQR to the median instead of Q3: 16 + 9 = 25
      • D (No; the upper fence is 47.5.): multiplied 1.5 by Q3 instead of by the IQR: 19 + 1.5 × 19 = 47.5

      Two-Way Tables and Relative Frequencies

      A two-way table sorts the same people or things by two categories at once. A joint relative frequency divides one cell by the grand total; a marginal relative frequency divides a row or column total by the grand total; a conditional relative frequency divides a cell by its own row or column total (the 'given' group). If the conditional relative frequencies differ across groups, the two variables are associated. Common traps: dividing by the wrong total, and treating an association as proof of cause.

      Key formulas
      Joint relative frequencycell countgrand total\dfrac{\text{cell count}}{\text{grand total}}
      Marginal relative frequencyrow or column totalgrand total\dfrac{\text{row or column total}}{\text{grand total}}
      Conditional relative frequencycell counttotal of the given row or column\dfrac{\text{cell count}}{\text{total of the given row or column}}
      Associationrates differ across groups ⇒ association\text{rates differ across groups}\ \Rightarrow\ \text{association}

      Joint relative frequency (S-ID.B.5)

      Method. A joint relative frequency is one cell of the table divided by the total number surveyed.

      Worked example. A survey asked 200 students at a Worcester high school which sport they prefer to watch. Of the 100 ninth graders, 48 prefer soccer and 52 prefer basketball. Of the 100 tenth graders, 60 prefer soccer and 40 prefer basketball. What percent of all the students surveyed are tenth graders who prefer soccer?

      • (A) 60%
      • (B) About 55.6%
      • (C) 54%
      • (D) 30%
      AnswerD — 30%
      Step-by-step
      1. Tenth graders who prefer soccer: 60 students.
      2. A joint relative frequency compares one cell to the grand total: 60 ÷ 200 = 0.30 = 30%.
      Fast methodCell ÷ grand total.
      Quick checkCheck: 30% of 200 is 60 ✓.
      Why the other choices are wrong
      • A (60%): divided by the 100 tenth graders, which gives a conditional relative frequency
      • B (About 55.6%): divided by the 108 students who prefer soccer
      • C (54%): found the percent of all students who prefer soccer, 108 out of 200

      Completing a two-way table (S-ID.B.5)

      Method. Use the row and column totals to fill in each missing cell, then add the cells you need.

      Worked example. In a survey of 150 adults in Lowell, 90 own a pet. Of the pet owners, 54 live in apartments and the rest live in houses. Of the adults who do not own a pet, 36 live in houses and the rest live in apartments. How many of the adults surveyed live in apartments?

      • (A) 78
      • (B) 54
      • (C) 114
      • (D) 60
      AnswerA — 78
      Step-by-step
      1. Part A: Adults without a pet: 150 − 90 = 60.
      2. Part B: Non-owners in apartments: 60 − 36 = 24.
      3. Part C: Adults in apartments: 54 + 24 = 78.
      Fast methodFill in the missing cells row by row, then add the apartment column.
      Quick checkCheck: houses = 36 + 36 = 72, and 78 + 72 = 150 ✓.
      Why the other choices are wrong
      • B (54): counted only the pet owners who live in apartments
      • C (114): subtracted only the non-pet owners in houses from the total: 150 − 36
      • D (60): gave the number of adults who do not own a pet

      Using conditional relative frequencies to judge association (S-ID.B.5, S-ID.C.9)

      Method. Compare conditional relative frequencies across groups; different rates mean association, but association is not causation.

      Worked example. A study looked at 250 drivers. Of the 100 drivers who took a safe-driving course, 12 had an accident in the next year. Of the 150 drivers who did not take the course, 30 had an accident in the next year. Which statement is best supported by the data?

      • (A) The accident rates are about 29% and 71%; the course group had far fewer accidents.
      • (B) The accident rates are 12% and 20%; the rates differ, so there is an association between taking the course and having fewer accidents.
      • (C) The accident rates are 4.8% and 12%; the course group had fewer accidents.
      • (D) The accident rates are 12% and 20%; this proves that the course causes drivers to have fewer accidents.
      AnswerB — The accident rates are 12% and 20%; the rates differ, so there is an association between taking the course and having fewer accidents.
      Step-by-step
      1. Part A: Course group rate: 12 ÷ 100 = 12%. No-course group rate: 30 ÷ 150 = 20%.
      2. Part B: The conditional relative frequencies are different, so taking the course and having an accident are associated.
      3. Part C: The drivers were not randomly assigned, so other factors (such as more careful drivers choosing the course) could explain the difference. The data show an association, not a cause.
      Fast methodCompare rates within each group (divide by the group total), not raw counts.
      Quick checkCheck: 12% of 100 = 12 and 20% of 150 = 30 ✓.
      Why the other choices are wrong
      • A (The accident rates are about 29% and 71%; the course group had far fewer accidents.): divided each group's accidents by the 42 total accidents instead of by the group size
      • C (The accident rates are 4.8% and 12%; the course group had fewer accidents.): divided each group's accidents by the grand total of 250 drivers
      • D (The accident rates are 12% and 20%; this proves that the course causes drivers to have fewer accidents.): treated an association in observational data as proof of cause

      Scatter Plots, Lines of Fit, Residuals and Correlation

      For two numerical variables, a scatter plot shows the form, direction and strength of the relationship. A line of fit ŷ = mx + b gives predictions: the slope is the predicted change in y for each 1-unit increase in x, and the y-intercept is the predicted y when x = 0. A residual is actual minus predicted; a residual plot with no pattern supports a linear model, while a curved pattern says a different model is needed. When y-values grow by a constant ratio, an exponential model y = a·bx^{x} fits. The correlation coefficient r (from a calculator) is between −1 and 1, has the same sign as the slope and measures the strength of a linear relationship. Correlation is not causation, and predictions far outside the data (extrapolation) are not reliable.

      Key formulas
      Line of fity^=mx+b\hat{y}=mx+b
      Residualresidual=y−y^\text{residual}=y-\hat{y}
      Slope from two pointsm=y2−y1x2−x1m=\dfrac{y_2-y_1}{x_2-x_1}
      Exponential modely=a⋅bx,  b=yk+1yky=a\cdot b^{x},\ \ b=\dfrac{y_{k+1}}{y_k}
      Correlation coefficient−1≤r≤1-1\le r\le 1

      Interpreting the slope of a line of fit (S-ID.C.7)

      Method. The slope of a line of fit is the predicted change in y for each 1-unit increase in x.

      Worked example. For used cars of one model, the line of fit ŷ = −1,250x + 18,400 relates the predicted price ŷ, in dollars, to the age x of the car, in years. What does the slope tell you?

      • (A) A new car of this model costs $1,250.
      • (B) The predicted price decreases by $18,400 for each additional year of age.
      • (C) Every car of this model loses exactly $1,250 in value each year.
      • (D) The predicted price decreases by $1,250 for each additional year of age.
      AnswerD — The predicted price decreases by $1,250 for each additional year of age.
      Step-by-step
      1. The slope is −1,250, the change in ŷ for each increase of 1 in x.
      2. So for each additional year of age, the predicted price goes down by $1,250. A line of fit describes a trend, not an exact value for every car.
      Fast methodSlope = change in the predicted y per 1 unit of x, in context.
      Quick checkCheck: at x = 1, ŷ = 17,150, which is $1,250 less than at x = 0 ✓.
      Why the other choices are wrong
      • A (A new car of this model costs $1,250.): confused the slope with the y-intercept
      • B (The predicted price decreases by $18,400 for each additional year of age.): used the y-intercept as the rate of change
      • C (Every car of this model loses exactly $1,250 in value each year.): treated the model's prediction as exact for every car

      Finding a residual (S-ID.B.6b)

      Method. A residual is the actual y-value minus the y-value the model predicts.

      Worked example. A line of fit for a set of data is ŷ = 3.2x + 15. One data point is (10, 44). What is the residual for this point?

      • (A) 3
      • (B) 47
      • (C) −3
      • (D) 12
      AnswerC — −3
      Step-by-step
      1. Predicted value: ŷ = 3.2 × 10 + 15 = 32 + 15 = 47.
      2. Residual = actual − predicted = 44 − 47 = −3.
      Fast methodResidual = observed y − predicted y.
      Quick checkCheck: the point lies 3 units below the line, so the residual is negative ✓.
      Why the other choices are wrong
      • A (3): subtracted in the wrong order: predicted − actual = 47 − 44
      • B (47): gave the predicted value instead of the residual
      • D (12): left out the y-intercept: 44 − 3.2 × 10 = 12

      Reading a residual pattern (S-ID.B.6b)

      Method. A residual plot with no pattern supports a linear model; a curve in the residuals means a linear model is not appropriate.

      Worked example. A student fits a line to data for x = 1, 2, 3, 4, 5 and 6. The residuals, in order of x, are 4, 1, −2, −3, −1 and 3. Which conclusion is best?

      • (A) The residuals go from positive to negative and back to positive, so a linear model is not a good choice; a curved model would fit better.
      • (B) The residuals add up to almost 0, so the linear model is a good fit.
      • (C) Some residuals are positive and some are negative, so the linear model is a good fit.
      • (D) Because some residuals are negative, the correlation coefficient must be negative.
      AnswerA — The residuals go from positive to negative and back to positive, so a linear model is not a good choice; a curved model would fit better.
      Step-by-step
      1. Part A: List the signs in order of x: +, +, −, −, −, +.
      2. Part B: The residuals form a U-shaped pattern (high, then low, then high again). A good linear fit leaves residuals scattered with no pattern.
      3. Part C: A clear curved pattern means the data are curved, so a nonlinear model (such as a quadratic) would describe them better.
      Fast methodPattern in residuals → wrong model type; random scatter → linear model is reasonable.
      Quick checkCheck: residuals 4 and 3 at the ends and −3 in the middle show the U shape ✓.
      Why the other choices are wrong
      • B (The residuals add up to almost 0, so the linear model is a good fit.): looked only at the sum of the residuals (2) and ignored the pattern
      • C (Some residuals are positive and some are negative, so the linear model is a good fit.): judged the fit by the signs of the residuals instead of their pattern
      • D (Because some residuals are negative, the correlation coefficient must be negative.): confused negative residuals with a negative association

      Probability: Unions, Independence and Conditional Probability

      Describe events as sets of outcomes: 'A or B' is the union, 'A and B' is the intersection, and 'not A' is the complement. The addition rule subtracts the overlap so it is counted once. A conditional probability P(B | A) uses only the outcomes in A as the new whole. Events are independent when one does not change the probability of the other: P(A and B) = P(A) × P(B), or P(B | A) = P(B). Common traps: adding without subtracting the overlap, dividing by the wrong total, mixing up P(A | B) and P(B | A), and confusing independent events with mutually exclusive events.

      Key formulas
      ComplementP(not A)=1−P(A)P(\text{not }A)=1-P(A)
      Addition ruleP(A or B)=P(A)+P(B)−P(A and B)P(A\text{ or }B)=P(A)+P(B)-P(A\text{ and }B)
      Conditional probabilityP(B∣A)=P(A and B)P(A)P(B\mid A)=\dfrac{P(A\text{ and }B)}{P(A)}
      IndependenceP(A and B)=P(A)⋅P(B) ⟺ P(B∣A)=P(B)P(A\text{ and }B)=P(A)\cdot P(B)\ \Longleftrightarrow\ P(B\mid A)=P(B)

      Probability of a union (S-CP.A.1, S-CP.B.7)

      Method. P(A or B) = P(A) + P(B) − P(A and B), so shared outcomes are counted once.

      Worked example. A spinner has 8 equal sections numbered 1 through 8. Event A is spinning an even number. Event B is spinning a number greater than 5. What is P(A or B)?

      • (A) 7/8
      • (B) 5/8
      • (C) 1/4
      • (D) 3/8
      AnswerB — 5/8
      Step-by-step
      1. A = {2, 4, 6, 8} and B = {6, 7, 8}.
      2. A or B = {2, 4, 6, 7, 8}, which has 5 outcomes.
      3. P(A or B) = 5/8. With the rule: 4/8 + 3/8 − 2/8 = 5/8.
      Fast methodList the union without repeating shared outcomes, or use P(A) + P(B) − P(A and B).
      Quick checkCheck: the outcomes not in A or B are 1, 3, 5, and 5/8 + 3/8 = 1 ✓.
      Why the other choices are wrong
      • A (7/8): added P(A) = 4/8 and P(B) = 3/8 without subtracting the overlap {6, 8}
      • C (1/4): found P(A and B), the outcomes 6 and 8 only
      • D (3/8): found the probability of neither event, the outcomes 1, 3 and 5

      Conditional probability from a two-way table (S-CP.A.4, S-CP.B.6)

      Method. P(B | A) = (number in both A and B) ÷ (number in A).

      Worked example. At a high school, 120 juniors and seniors each take one science elective. Of the juniors, 30 take Chemistry and 42 take Physics. Of the seniors, 18 take Chemistry and 30 take Physics. A senior is chosen at random. What is the probability that the senior takes Physics?

      • (A) 1/4
      • (B) 5/12
      • (C) 2/5
      • (D) 5/8
      AnswerD — 5/8
      Step-by-step
      1. The condition is 'senior', so use only the seniors: 18 + 30 = 48 students.
      2. Of those 48 seniors, 30 take Physics.
      3. P(Physics | senior) = 30/48 = 5/8.
      Fast methodThe 'given' group is the denominator.
      Quick checkCheck: P(Chemistry | senior) = 18/48 = 3/8, and 5/8 + 3/8 = 1 ✓.
      Why the other choices are wrong
      • A (1/4): divided by all 120 students, which gives P(senior and Physics)
      • B (5/12): divided by the 72 Physics students, which gives P(senior | Physics)
      • C (2/5): found P(senior), 48 out of 120

      Testing independence (S-CP.A.2, S-CP.A.4)

      Method. Events A and B are independent when P(A and B) = P(A) × P(B), which is the same as P(B | A) = P(B).

      Worked example. A survey of 400 adults found that 160 drink coffee every day (event C), 100 exercise every day (event E) and 40 do both. Are events C and E independent?

      • (A) No, because P(C and E) = 0.10 is not equal to P(C) + P(E) = 0.65.
      • (B) No, because P(E | C) = 0.25 is not equal to P(C) = 0.40.
      • (C) Yes, because P(C and E) = 0.10 and P(C) × P(E) = 0.40 × 0.25 = 0.10.
      • (D) No, because 40 people are in both groups, so the events overlap.
      AnswerC — Yes, because P(C and E) = 0.10 and P(C) × P(E) = 0.40 × 0.25 = 0.10.
      Step-by-step
      1. Part A: P(C) = 160/400 = 0.40, P(E) = 100/400 = 0.25 and P(C and E) = 40/400 = 0.10.
      2. Part B: P(C) × P(E) = 0.40 × 0.25 = 0.10, which equals P(C and E).
      3. Part C: So C and E are independent. Another check: P(E | C) = 40/160 = 0.25 = P(E).
      Fast methodIndependent exactly when P(A and B) = P(A) × P(B), or when P(B | A) = P(B).
      Quick checkCheck: 25% of the 160 coffee drinkers is 40, the same 25% rate as all adults ✓.
      Why the other choices are wrong
      • A (No, because P(C and E) = 0.10 is not equal to P(C) + P(E) = 0.65.): tested independence with addition instead of multiplication
      • B (No, because P(E | C) = 0.25 is not equal to P(C) = 0.40.): compared P(E | C) with P(C) instead of with P(E)
      • D (No, because 40 people are in both groups, so the events overlap.): confused overlapping (not mutually exclusive) events with dependent events