New Jersey NJSLA-A Mathematics · Math · Geometry

Geometry: Study Guide

Geometry end-of-course mathematics on the New Jersey NJSLA-A, built on the 2023 New Jersey Student Learning Standards for Mathematics. Since spring 2026 the real test is computer-adaptive: one math unit of two 75-minute sessions with 45 machine-scored items (multiple choice, multi-select, typed equations, graphing and similar), and a graphing calculator built into the platform. Level 4 (Met Expectations) is the target. Questions here are multiple choice and typed answers; the timer is a practice target.

08.01 08.01 Content (Geometry)

This topic covers the whole New Jersey Geometry course (2023 NJSLS-M and the NJDOE Geometry framework): transformations, congruence and proof, similarity and right-triangle trigonometry, coordinate geometry and circle equations, circles, and volume, cross-sections and modeling, weighted like the test, where about a third of the items are on congruence. The NJSLA-A Geometry end-of-course test is computer-adaptive and timed: one math unit of two 75-minute sessions with 45 machine-scored items, and harder sets of items follow correct sets. A graphing calculator (Desmos graphing) is built in; whether part of the test is non-calculator is not yet confirmed, so most items here are meant to be done without one. Reference sheet: check the NJ Assessments Portal; formulas you are not expected to know, such as pyramid volume, are given in the question here, and questions have four answer choices or ask you to type an answer.

Transformations and Rigid Motions

A transformation moves every point of a figure by a rule. Translations, reflections and rotations are rigid motions: they keep every length and every angle measure, so the image is congruent to the original. Learn the coordinate rules below and apply them one step at a time; in a sequence, order matters, so do the first move first. A regular polygon with n sides maps onto itself by rotations about its center through multiples of 360°/n. Common traps: mixing up clockwise and counterclockwise, reflecting over the wrong axis, and doing a sequence in the wrong order.

Key formulas
Translation(x, y)→(x+a,  y+b)(x,\,y)\to(x+a,\;y+b)
Reflectionsx-axis:(x,y)→(x,−y)y-axis:(x,y)→(−x,y)y=x:(x,y)→(y,x)x\text{-axis}: (x,y)\to(x,-y)\quad y\text{-axis}: (x,y)\to(-x,y)\quad y=x: (x,y)\to(y,x)
Rotations about the origin (counterclockwise)90∘:(x,y)→(−y,x)180∘:(x,y)→(−x,−y)270∘:(x,y)→(y,−x)90^\circ: (x,y)\to(-y,x)\quad 180^\circ: (x,y)\to(-x,-y)\quad 270^\circ: (x,y)\to(y,-x)
Rotational symmetry of a regular n-gonsmallest angle=360∘n\text{smallest angle}=\dfrac{360^\circ}{n}
Rigid motions preservelength, angle measure, parallelism  ⇒  image≅preimage\text{length, angle measure, parallelism}\;\Rightarrow\;\text{image}\cong\text{preimage}

Reflecting a point

Method. Apply the coordinate rule for the line of reflection to each coordinate.

Worked example. Point P(3, −5) is reflected across the y-axis. What are the coordinates of its image P′?

  • (A) (−3, −5)
  • (B) (3, 5)
  • (C) (−5, 3)
  • (D) (−3, 5)
AnswerA — (−3, −5)
Step-by-step
  1. A reflection across the y-axis keeps the y-coordinate and changes the sign of the x-coordinate: (x, y) → (−x, y).
  2. (3, −5) → (−3, −5).
Fast methody-axis: change the sign of x only.
Quick checkCheck: P and P′ are both 3 units from the y-axis, on opposite sides, at the same height ✓.
Why the other choices are wrong
  • B ((3, 5)): reflected across the x-axis instead of the y-axis
  • C ((−5, 3)): used the rule for a reflection across y = x
  • D ((−3, 5)): changed the signs of both coordinates, which is a 180° rotation

Sequence of transformations

Method. Apply each transformation's rule in order to the point's coordinates.

Worked example. Point A(4, 1) is rotated 90° counterclockwise about the origin. Its image is then translated by the rule (x, y) → (x + 2, y − 3). What are the coordinates of the final image?

  • (A) (3, −7)
  • (B) (2, 6)
  • (C) (1, 1)
  • (D) (3, 1)
AnswerC — (1, 1)
Step-by-step
  1. Rotate 90° counterclockwise: (x, y) → (−y, x), so (4, 1) → (−1, 4).
  2. Translate: (−1 + 2, 4 − 3) = (1, 1).
Fast methodDo the moves in the order given: rotate, then slide.
Quick checkCheck: (1, 1) − (2, −3) = (−1, 4), and rotating (−1, 4) 90° clockwise gives back (4, 1) ✓.
Why the other choices are wrong
  • A ((3, −7)): rotated 90° clockwise, (x, y) → (y, −x), then translated
  • B ((2, 6)): translated first and then rotated, doing the steps in the wrong order
  • D ((3, 1)): swapped the coordinates without changing a sign, then translated

Mapping a figure onto itself

Method. Test a transformation by applying it to every vertex and checking that each image is a vertex.

Worked example. Rectangle ABCD has vertices A(1, 1), B(5, 1), C(5, 3) and D(1, 3). Which transformation maps the rectangle onto itself?

  • (A) a reflection across the line y = x
  • (B) a reflection across the line x = 3
  • (C) a rotation of 90° about the point (3, 2)
  • (D) a reflection across the line through A and C
AnswerB — a reflection across the line x = 3
Step-by-step
  1. The rectangle is 4 units wide (x from 1 to 5) and 2 units tall (y from 1 to 3), so its center is (3, 2).
  2. Reflecting across x = 3: (x, y) → (6 − x, y). A(1, 1) → (5, 1) = B, B → A, C(5, 3) → (1, 3) = D, D → C.
  3. Every vertex lands on a vertex, so the rectangle maps onto itself.
  4. A 90° rotation about (3, 2) sends B(5, 1) to (4, 4), and the diagonal reflection or y = x sends vertices off the rectangle.
Fast methodA non-square rectangle has only two lines of symmetry (through the midpoints of opposite sides) and a 180° rotation.
Quick checkCheck: x = 3 is halfway between x = 1 and x = 5 ✓.
Why the other choices are wrong
  • A (a reflection across the line y = x): treated the line y = x as a line of symmetry, but the image of B(5, 1) is (1, 5), not a vertex
  • C (a rotation of 90° about the point (3, 2)): treated the rectangle as a square; a 4-by-2 rectangle needs a 180° rotation
  • D (a reflection across the line through A and C): assumed a diagonal of a rectangle is a line of symmetry, which is true only for a square

Congruence, Proofs and Constructions

Two triangles are congruent when a sequence of rigid motions maps one onto the other. You can prove it with SSS, SAS, ASA, AAS or, for right triangles, HL; SSA and AAA do not prove congruence. Use angle facts in proofs and equations: vertical angles are equal, a linear pair adds to 180°, and parallel lines cut by a transversal make equal alternate interior angles and supplementary same-side interior angles. Know the facts about triangles (angle sum, exterior angle, isosceles base angles, midsegments) and parallelograms (opposite sides equal, diagonals bisect each other). Constructions use only a compass and a straightedge. Common traps: using a pair of angles as equal when they are supplementary, and naming SAS when the angle is not between the two sides.

Key formulas
Triangle congruence criteriaSSS, SAS, ASA, AAS, HL;not SSA, not AAA\text{SSS},\ \text{SAS},\ \text{ASA},\ \text{AAS},\ \text{HL};\quad \text{not SSA, not AAA}
Triangle anglesm∠A+m∠B+m∠C=180∘,exterior angle=sum of the two remote interior anglesm\angle A+m\angle B+m\angle C=180^\circ,\qquad \text{exterior angle}=\text{sum of the two remote interior angles}
Parallel lines and a transversalalternate interior angles are congruent; same-side interior angles add to 180∘\text{alternate interior angles are congruent; same-side interior angles add to }180^\circ
Midsegment of a triangleMN∥BC,MN=12BCMN\parallel BC,\qquad MN=\tfrac{1}{2}BC
ParallelogramAB=CD, BC=DA, and the diagonals bisect each other: AE=EC, BE=EDAB=CD,\ BC=DA,\ \text{and the diagonals bisect each other: }AE=EC,\ BE=ED

Choosing a congruence criterion

Method. Name the criterion from which parts are known and where the angle is.

Worked example. In triangles ABC and DEF, AB = DE, BC = EF and m∠B = m∠E. Which statement is true?

  • (A) The triangles are congruent by ASA.
  • (B) The triangles are congruent by SSS.
  • (C) The triangles cannot be proved congruent.
  • (D) The triangles are congruent by SAS.
AnswerD — The triangles are congruent by SAS.
Step-by-step
  1. ∠B is formed by sides AB and BC, so it is the angle between the two given sides.
  2. Two sides and the included angle match, so △ABC ≅ △DEF by SAS.
Fast methodFind where the angle sits: between the two sides means SAS.
Quick checkCheck: the matching angle ∠E is between DE and EF ✓.
Why the other choices are wrong
  • A (The triangles are congruent by ASA.): mixed up sides and angles; only one pair of angles is known
  • B (The triangles are congruent by SSS.): assumed the third sides are equal without being told
  • C (The triangles cannot be proved congruent.): did not see that ∠B is between sides AB and BC, so it is the included angle

Parallel lines and a transversal

Method. Use the angle relationship to write an equation, solve for x, then substitute.

Worked example. Two parallel lines are cut by a transversal. A pair of alternate interior angles measure (3x + 10)° and (5x − 30)°. What is the measure of each of these angles?

  • (A) 20°
  • (B) 70°
  • (C) 85°
  • (D) 95°
AnswerB — 70°
Step-by-step
  1. Alternate interior angles formed by parallel lines are congruent: 3x + 10 = 5x − 30.
  2. 40 = 2x, so x = 20.
  3. 3(20) + 10 = 70, and 5(20) − 30 = 70, so each angle is 70°.
Fast methodAlternate interior: set equal.
Quick checkCheck: both expressions give 70 ✓.
Why the other choices are wrong
  • A (20°): stopped at the value of x
  • C (85°): set the angles to add to 180°, then found 3x + 10
  • D (95°): set the angles to add to 180°, then found 5x − 30

Diagonals of a parallelogram

Method. Use the parallelogram property to write an equation, solve, then build the length asked for.

Worked example. The diagonals of parallelogram ABCD intersect at E. AE = 2x + 3, EC = 4x − 5 and BE = x + 5. What is the length of diagonal BD?

  • (A) 18
  • (B) 9
  • (C) 22
  • (D) 14
AnswerA — 18
Step-by-step
  1. The diagonals of a parallelogram bisect each other, so AE = EC: 2x + 3 = 4x − 5.
  2. 8 = 2x, so x = 4.
  3. BE = 4 + 5 = 9, and BE = ED, so BD = 2(9) = 18.
Fast methodBisect means the two halves are equal; then double the half you need.
Quick checkCheck: AE = 11 = EC, so AC = 22; BD = 18 is a different length, which is allowed in a parallelogram ✓.
Why the other choices are wrong
  • B (9): found BE, which is only half of BD
  • C (22): found the length of diagonal AC instead of BD
  • D (14): assumed the diagonals are congruent and set AE = BE

Similarity, Right Triangles and Trigonometry

A dilation with center C and scale factor k multiplies every distance from C by k; it keeps angle measures, so the image is similar to the original. Similar figures have equal corresponding angles and proportional corresponding sides, and two pairs of equal angles (AA) are enough to prove two triangles similar. A line parallel to one side of a triangle divides the other two sides proportionally. In a right triangle use the Pythagorean theorem and the ratios sine, cosine and tangent; sin A = cos(90° − A). On the calculator, check that it is in degree mode and use the inverse ratio to find an angle. Common traps: setting up a proportion with a part of a side against a whole side, and using the wrong trig ratio for the sides you know.

Key formulas
Dilation with center at the origin(x, y)→(kx,  ky)(x,\,y)\to(kx,\;ky)
Trig ratiossin⁡A=oppositehypotenuse,cos⁡A=adjacenthypotenuse,tan⁡A=oppositeadjacent\sin A=\dfrac{\text{opposite}}{\text{hypotenuse}},\quad \cos A=\dfrac{\text{adjacent}}{\text{hypotenuse}},\quad \tan A=\dfrac{\text{opposite}}{\text{adjacent}}
Complementary anglessin⁡A=cos⁡(90∘−A)\sin A=\cos(90^\circ-A)
Pythagorean theorema2+b2=c2a^2+b^2=c^2
Special right triangles45∘-45∘-90∘: x, x, x230∘-60∘-90∘: x, x3, 2x45^\circ\text{-}45^\circ\text{-}90^\circ:\ x,\ x,\ x\sqrt{2}\qquad 30^\circ\text{-}60^\circ\text{-}90^\circ:\ x,\ x\sqrt{3},\ 2x
Triangle proportionality (DE parallel to BC)ADDB=AEEC,ADAB=DEBC\dfrac{AD}{DB}=\dfrac{AE}{EC},\qquad \dfrac{AD}{AB}=\dfrac{DE}{BC}

Dilation from the origin

Method. Multiply each coordinate by the scale factor when the center is the origin.

Worked example. Point Q(4, −6) is dilated with center at the origin and scale factor 3/2. What are the coordinates of Q′?

  • (A) (8/3, −4)
  • (B) (5.5, −4.5)
  • (C) (6, −9)
  • (D) (6, −6)
AnswerC — (6, −9)
Step-by-step
  1. A dilation centered at the origin multiplies each coordinate by k: (x, y) → (kx, ky).
  2. (3/2)(4) = 6 and (3/2)(−6) = −9, so Q′ = (6, −9).
Fast methodMultiply both coordinates by k.
Quick checkCheck: Q′ is 1.5 times as far from the origin as Q, in the same direction ✓.
Why the other choices are wrong
  • A ((8/3, −4)): divided by the scale factor instead of multiplying
  • B ((5.5, −4.5)): added 1.5 to each coordinate instead of multiplying
  • D ((6, −6)): multiplied only the x-coordinate by the scale factor

Finding a side with sine

Method. Label the sides from the angle, choose the trig ratio that uses them, and solve.

Worked example. A 20-foot ladder leans against a wall and makes a 68° angle with the level ground. To the nearest tenth of a foot, how high up the wall does the ladder reach?

  • (A) 7.5
  • (B) 49.5
  • (C) 21.6
  • (D) 18.5
AnswerD — 18.5
Step-by-step
  1. The ladder is the hypotenuse. The height is opposite the 68° angle.
  2. sin 68° = height ÷ 20, so height = 20 sin 68°.
  3. 20 × 0.9272 ≈ 18.54, which is about 18.5 feet.
Fast methodOpposite and hypotenuse → sine.
Quick checkCheck: the height is less than the 20-foot ladder ✓, and 18.5² + 7.5² ≈ 400 ✓.
Why the other choices are wrong
  • A (7.5): used cosine, which gives the distance from the wall
  • B (49.5): used tangent, treating the ladder as the side next to the angle
  • C (21.6): divided by sine instead of multiplying

Triangle proportionality

Method. Prove the triangles similar, then match corresponding whole sides in a proportion.

Worked example. In triangle ABC, point D is on AB and point E is on AC so that DE is parallel to BC. AD = 8, DB = 4 and DE = 12. What is BC?

  • (A) 6
  • (B) 18
  • (C) 16
  • (D) 24
AnswerB — 18
Step-by-step
  1. Because DE ∥ BC, △ADE ~ △ABC by AA (corresponding angles are equal).
  2. AB = AD + DB = 8 + 4 = 12.
  3. AD/AB = DE/BC, so 8/12 = 12/BC.
  4. 8 · BC = 144, so BC = 18.
Fast methodCompare whole to whole: small triangle sides over big triangle sides.
Quick checkCheck: the scale factor is 12/8 = 1.5, and 12 × 1.5 = 18 ✓.
Why the other choices are wrong
  • A (6): used AD/DB = DE/BC, comparing a part of AB with the whole side BC
  • C (16): added DB to DE instead of using a ratio
  • D (24): treated DE as a midsegment and doubled it, but D is not the midpoint of AB

Coordinate Geometry and Circle Equations

Use coordinates to measure and to prove. Slopes tell you about lines: parallel lines have equal slopes and perpendicular lines have slopes whose product is −1. The distance formula gives lengths for perimeters and for checking which sides are equal. To find the point that partitions a directed segment from A to B in the ratio m : n, go the fraction m/(m + n) of the way from A to B. A circle with center (h, k) and radius r has equation (x − h)² + (y − k)² = r²; when the equation is expanded, complete the square in x and in y to find the center and radius. Common traps: sign errors in the center, forgetting to take the square root for the radius, and using m/n instead of m/(m + n).

Key formulas
Slopem=y2−y1x2−x1;parallel: m1=m2,perpendicular: m1m2=−1m=\dfrac{y_2-y_1}{x_2-x_1};\qquad \text{parallel: } m_1=m_2,\quad \text{perpendicular: } m_1 m_2=-1
Distanced=(x2−x1)2+(y2−y1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}
MidpointM=(x1+x22, y1+y22)M=\left(\dfrac{x_1+x_2}{2},\ \dfrac{y_1+y_2}{2}\right)
Partition A to B in ratio m : nP=A+mm+n(B−A)P=A+\dfrac{m}{m+n}(B-A)
Circle(x−h)2+(y−k)2=r2(x-h)^2+(y-k)^2=r^2

Perpendicular slope

Method. Perpendicular slopes are opposite reciprocals.

Worked example. Line ℓ has equation y = (2/3)x − 4. What is the slope of a line perpendicular to ℓ?

  • (A) −3/2
  • (B) 2/3
  • (C) 3/2
  • (D) −2/3
AnswerA — −3/2
Step-by-step
  1. The slope of ℓ is 2/3.
  2. Perpendicular slopes multiply to −1, so the new slope is the opposite reciprocal: −3/2.
Fast methodFlip the fraction and change the sign.
Quick checkCheck: (2/3)(−3/2) = −1 ✓.
Why the other choices are wrong
  • B (2/3): gave the slope of a parallel line
  • C (3/2): took the reciprocal but did not change the sign
  • D (−2/3): changed the sign but did not take the reciprocal

Partitioning a directed segment

Method. P = A + (m/(m + n))(B − A).

Worked example. Point P lies on the directed segment from A(−2, 1) to B(10, 7) and partitions it in the ratio 1 : 2. What are the coordinates of P?

  • (A) (4, 4)
  • (B) (6, 5)
  • (C) (2, 3)
  • (D) (4, 2)
AnswerC — (2, 3)
Step-by-step
  1. A ratio of 1 : 2 means P is 1/(1 + 2) = 1/3 of the way from A to B.
  2. Change from A to B: 10 − (−2) = 12 in x and 7 − 1 = 6 in y.
  3. One third of the change: (4, 2).
  4. P = (−2 + 4, 1 + 2) = (2, 3).
Fast methodFraction = m/(m + n); start at A and add that fraction of the change.
Quick checkCheck: AP = √(16 + 4) = √20 and PB = √(64 + 16) = √80 = 2√20, ratio 1 : 2 ✓.
Why the other choices are wrong
  • A ((4, 4)): used the fraction 1/2 (the ratio itself) instead of 1/3
  • B ((6, 5)): went 1/3 of the way from B instead of from A
  • D ((4, 2)): found 1/3 of the change but did not add it to A

Circle equation by completing the square

Method. Complete the square in x and y to reach (x − h)² + (y − k)² = r².

Worked example. A circle has equation x² + y² − 6x + 10y + 18 = 0. What are its center and radius?

  • (A) center (−3, 5), radius 4
  • (B) center (3, −5), radius 16
  • (C) center (3, −5), radius 2√13
  • (D) center (3, −5), radius 4
AnswerD — center (3, −5), radius 4
Step-by-step
  1. Group the terms: (x² − 6x) + (y² + 10y) = −18.
  2. Complete each square: add 9 and 25 to both sides: (x² − 6x + 9) + (y² + 10y + 25) = −18 + 9 + 25.
  3. (x − 3)² + (y + 5)² = 16.
  4. Center (3, −5); r² = 16, so r = 4.
Fast methodHalf each linear coefficient, square it, add to both sides; the center has the opposite signs.
Quick checkCheck: (7, −5) is 4 units right of the center, and 49 + 25 − 42 − 50 + 18 = 0 ✓.
Why the other choices are wrong
  • A (center (−3, 5), radius 4): used the signs of the coefficients for the center
  • B (center (3, −5), radius 16): did not take the square root of r²
  • C (center (3, −5), radius 2√13): added 18 to the right side instead of subtracting it

Circles: Angles, Arcs, Radians and Sectors

All circles are similar, so arc length and sector area are the same fraction of the circumference and of the area as the central angle is of 360°. An inscribed angle is half of its intercepted arc, an angle inscribed in a semicircle is a right angle, the opposite angles of a quadrilateral inscribed in a circle add to 180°, and a tangent line is perpendicular to the radius at the point of tangency. Radian measure is arc length divided by radius, so 180° = π radians. Common traps: using the central angle for an inscribed angle, using the diameter as the radius, and mixing degrees and radians in one formula.

Key formulas
Degrees and radians180∘=π radians;radians=degrees×π180180^\circ=\pi\text{ radians};\qquad \text{radians}=\text{degrees}\times\dfrac{\pi}{180}
Arc lengths=rθ (θ in radians)s=θ360⋅2πr (θ in degrees)s=r\theta\ (\theta\text{ in radians})\qquad s=\dfrac{\theta}{360}\cdot 2\pi r\ (\theta\text{ in degrees})
Sector areaA=12r2θ (θ in radians)A=θ360⋅πr2 (θ in degrees)A=\tfrac{1}{2}r^2\theta\ (\theta\text{ in radians})\qquad A=\dfrac{\theta}{360}\cdot\pi r^2\ (\theta\text{ in degrees})
Inscribed anglem∠(inscribed)=12 m(intercepted arc)m\angle(\text{inscribed})=\tfrac{1}{2}\,m(\text{intercepted arc})
Inscribed quadrilateral and tangentm∠A+m∠C=180∘;tangent⊥radiusm\angle A+m\angle C=180^\circ;\qquad \text{tangent}\perp\text{radius}

Degrees to radians

Method. Use 180° = π radians as the conversion factor.

Worked example. What is 150° in radians?

  • (A) 6π/5
  • (B) 5π/6
  • (C) 5π/12
  • (D) 5/6
AnswerB — 5π/6
Step-by-step
  1. Multiply by π/180: 150 × π/180 = 150π/180.
  2. Simplify: 150/180 = 5/6, so 150° = 5π/6 radians.
Fast methodDegrees × π/180.
Quick checkCheck: 5π/6 is a little less than π, and 150° is a little less than 180° ✓.
Why the other choices are wrong
  • A (6π/5): inverted the fraction, writing 180/150 = 6/5 instead of 150/180 = 5/6
  • C (5π/12): used π/360 as the conversion factor
  • D (5/6): left out π

Inscribed quadrilateral

Method. Write the supplementary-angle equation, solve for x, then evaluate the angle asked for.

Worked example. Quadrilateral ABCD is inscribed in a circle. m∠A = (3x + 5)° and m∠C = (2x + 25)°. What is m∠C?

  • (A) 65°
  • (B) 30°
  • (C) 95°
  • (D) 85°
AnswerD — 85°
Step-by-step
  1. Opposite angles of an inscribed quadrilateral are supplementary: (3x + 5) + (2x + 25) = 180.
  2. 5x + 30 = 180, so x = 30.
  3. m∠C = 2(30) + 25 = 85°.
Fast methodOpposite angles in a cyclic quadrilateral add to 180°.
Quick checkCheck: m∠A = 95° and 95 + 85 = 180 ✓.
Why the other choices are wrong
  • A (65°): set ∠A and ∠C equal instead of supplementary
  • B (30°): stopped at the value of x
  • C (95°): found m∠A instead of m∠C

Sector area from arc length

Method. Find θ in radians from s = rθ, then use A = (1/2)r²θ.

Worked example. In a circle with radius 6 cm, a sector has arc length 4π cm. What is the area of the sector?

  • (A) 12π cm²
  • (B) 24π cm²
  • (C) 2π cm²
  • (D) 36π cm²
AnswerA — 12π cm²
Step-by-step
  1. Find the central angle in radians: θ = s/r = 4π/6 = 2π/3.
  2. Sector area: A = (1/2)r²θ = (1/2)(36)(2π/3) = 12π cm².
Fast methodShortcut: A = (1/2)rs = (1/2)(6)(4π) = 12π.
Quick checkCheck: 2π/3 is 1/3 of a full turn, and 1/3 of 36π is 12π ✓.
Why the other choices are wrong
  • B (24π cm²): forgot the 1/2 in A = (1/2)r²θ
  • C (2π cm²): used r instead of r² in A = (1/2)r²θ
  • D (36π cm²): gave the area of the whole circle

Volume, Cross-Sections and Modeling

Know the volume formulas for a cylinder, cone and sphere; the pyramid formula is given in the question here. A cross-section is the shape made when a plane slices a solid, and rotating a flat shape about a line makes a solid of rotation (a rectangle makes a cylinder, a right triangle about a leg makes a cone). Modeling problems describe real objects with these shapes and ask for a quantity such as a cost, a mass or a number of containers; density is an amount per unit of area or volume. Common traps: using the diameter as the radius, forgetting the 1/3 for cones and pyramids, and dividing the wrong way in a density problem.

Key formulas
CylinderV=πr2hV=\pi r^2 h
ConeV=13πr2hV=\tfrac{1}{3}\pi r^2 h
SphereV=43πr3V=\tfrac{4}{3}\pi r^3
Pyramid (given on the test page here)V=13Bh,B=area of the baseV=\tfrac{1}{3}Bh,\quad B=\text{area of the base}
Densitydensity=massvolumeornumber of peoplearea\text{density}=\dfrac{\text{mass}}{\text{volume}}\quad\text{or}\quad\dfrac{\text{number of people}}{\text{area}}

Cross-section of a cylinder

Method. Picture where the plane meets each face of the solid.

Worked example. A right circular cylinder is sliced by a plane that is perpendicular to its bases and passes through the centers of both bases. What is the shape of the cross-section?

  • (A) a circle
  • (B) an ellipse
  • (C) a rectangle
  • (D) a triangle
AnswerC — a rectangle
Step-by-step
  1. The plane cuts each base along a diameter, giving two parallel segments of equal length.
  2. It cuts the curved side along two vertical segments equal to the height.
  3. Four segments with right angles make a rectangle (diameter by height).
Fast methodVertical slice through the axis of a cylinder → rectangle.
Quick checkCheck: a can cut straight down the middle shows a rectangular face ✓.
Why the other choices are wrong
  • A (a circle): described a slice parallel to the bases
  • B (an ellipse): described a slice tilted at an angle to the bases
  • D (a triangle): described the slice of a cone through its apex

Comparing volumes in a model

Method. Find each volume with its formula, then divide.

Worked example. A paper cone has radius 3 cm and height 8 cm. It is used to fill a cylindrical vase with radius 6 cm and height 10 cm. How many full cones of water does it take to fill the vase?

  • (A) 15
  • (B) 5
  • (C) 45
  • (D) 2.5
AnswerA — 15
Step-by-step
  1. Vase: V = πr²h = π(36)(10) = 360π cm³.
  2. Cone: V = (1/3)πr²h = (1/3)π(9)(8) = 24π cm³.
  3. 360π ÷ 24π = 15 cones.
Fast methodDivide the volumes; π cancels.
Quick checkCheck: 15 × 24π = 360π ✓.
Why the other choices are wrong
  • B (5): forgot the 1/3 in the cone formula
  • C (45): did not square the radius of the cone
  • D (2.5): did not square the radius of the cylinder

Density and mass

Method. Find the volume, then multiply by the density.

Worked example. A solid steel ball has a diameter of 6 cm. The steel has a density of 7.8 grams per cubic centimeter. To the nearest tenth of a gram, what is the mass of the ball?

  • (A) 7057.3 g
  • (B) 661.6 g
  • (C) 14.5 g
  • (D) 882.2 g
AnswerD — 882.2 g
Step-by-step
  1. The radius is 6 ÷ 2 = 3 cm.
  2. V = (4/3)π(3)³ = 36π ≈ 113.097 cm³.
  3. Mass = density × volume = 7.8 × 113.097 ≈ 882.16, about 882.2 g.
Fast methodMass = density × volume; halve the diameter first.
Quick checkCheck: 113 cm³ at about 8 g each is about 900 g ✓.
Why the other choices are wrong
  • A (7057.3 g): used the diameter 6 as the radius
  • B (661.6 g): left out the 4/3 in the sphere formula
  • C (14.5 g): divided the volume by the density instead of multiplying