New York Regents Geometry · Geometry

Geometry: Formula Sheet

Definitions, Transformations and Symmetry

Translation(x,y)↦(x+a,  y+b)(x,y)\mapsto(x+a,\;y+b)
Rotations about the origin (counterclockwise)R90∘:(x,y)↦(−y,x),R180∘:(x,y)↦(−x,−y),R270∘:(x,y)↦(y,−x)R_{90^\circ}:(x,y)\mapsto(-y,x),\quad R_{180^\circ}:(x,y)\mapsto(-x,-y),\quad R_{270^\circ}:(x,y)\mapsto(y,-x)
Reflections over the axes and y = xrx-axis:(x,y)↦(x,−y),ry-axis:(x,y)↦(−x,y),ry=x:(x,y)↦(y,x)r_{x\text{-axis}}:(x,y)\mapsto(x,-y),\quad r_{y\text{-axis}}:(x,y)\mapsto(-x,y),\quad r_{y=x}:(x,y)\mapsto(y,x)
Reflections over x = k and y = krx=k:(x,y)↦(2k−x,  y),ry=k:(x,y)↦(x,  2k−y)r_{x=k}:(x,y)\mapsto(2k-x,\;y),\qquad r_{y=k}:(x,y)\mapsto(x,\;2k-y)
Regular n-gon onto itselfrotation about its center by k⋅360∘n,k=1,2,…,n\text{rotation about its center by } k\cdot\dfrac{360^\circ}{n},\quad k=1,2,\dots,n

Congruence and the Triangle Congruence Criteria

Congruence by rigid motions△ABC≅△DEF  ⟺  rigid motions map △ABC onto △DEF\triangle ABC\cong\triangle DEF\iff\text{rigid motions map }\triangle ABC\text{ onto }\triangle DEF
Valid criteriaSSS, SAS, ASA, AAS, HL (right triangles)\text{SSS},\ \text{SAS},\ \text{ASA},\ \text{AAS},\ \text{HL (right triangles)}
Not validAAA and SSA do not prove congruence\text{AAA and SSA do not prove congruence}
Corresponding parts (CPCTC)△ABC≅△DEF⇒AB‾≅DE‾, ∠B≅∠E, CA‾≅FD‾\triangle ABC\cong\triangle DEF\Rightarrow \overline{AB}\cong\overline{DE},\ \angle B\cong\angle E,\ \overline{CA}\cong\overline{FD}
Reflexive property (shared side)XY‾≅XY‾\overline{XY}\cong\overline{XY}

Theorems About Lines, Angles, Triangles and Parallelograms

Vertical angles and linear pairsm∠1=m∠3,m∠1+m∠2=180∘m\angle 1=m\angle 3,\qquad m\angle 1+m\angle 2=180^\circ
Parallel lines and a transversalalt. interior: m∠a=m∠b,same-side interior: m∠a+m∠c=180∘\text{alt. interior: } m\angle a=m\angle b,\qquad \text{same-side interior: } m\angle a+m\angle c=180^\circ
Triangle angle sum and exterior anglem∠A+m∠B+m∠C=180∘,m∠ext=m∠A+m∠Bm\angle A+m\angle B+m\angle C=180^\circ,\qquad m\angle_{\text{ext}}=m\angle A+m\angle B
Triangle inequality∣a−b∣<c<a+b|a-b|<c<a+b
MidsegmentDE‾∥BC‾,DE=12BC\overline{DE}\parallel\overline{BC},\qquad DE=\tfrac{1}{2}BC
Parallelogram diagonalsAE=EC,BE=ED;AC=BD⇒rectangleAE=EC,\quad BE=ED;\qquad AC=BD\Rightarrow\text{rectangle}

Constructions with Compass and Straightedge

Perpendicular bisectorPA=PB  ⟺  P is on the perpendicular bisector of AB‾PA=PB\iff P\text{ is on the perpendicular bisector of }\overline{AB}
Points of concurrencyperpendicular bisectors→circumcenter,angle bisectors→incentermedians→centroid,altitudes→orthocenter\begin{aligned}&\text{perpendicular bisectors}\to\text{circumcenter},\quad \text{angle bisectors}\to\text{incenter}\\&\text{medians}\to\text{centroid},\quad \text{altitudes}\to\text{orthocenter}\end{aligned}
Regular hexagon inscribed in a circle of radius rside=r,central angle=60∘\text{side}=r,\qquad \text{central angle}=60^\circ
Inscribed squaretwo perpendicular diameters; diagonal=2r\text{two perpendicular diameters};\ \text{diagonal}=2r

Dilations and Similarity Transformations

Dilation centered at the origin(x, y)→(kx, ky)(x,\,y)\to(kx,\,ky)
Dilation centered at (a, b)(x, y)→(a+k(x−a),  b+k(y−b))(x,\,y)\to\big(a+k(x-a),\;b+k(y-b)\big)
Image lengthsA′B′=k⋅ABA'B'=k\cdot AB
Linesℓ∌P⇒ℓ′∥ℓ;ℓ∋P⇒ℓ′=ℓ\ell\not\ni P\Rightarrow \ell'\parallel\ell;\quad \ell\ni P\Rightarrow \ell'=\ell
Similar figuressimilarity=dilation+rigid motions\text{similarity} = \text{dilation} + \text{rigid motions}

Similar Triangles: Criteria and Theorems

Side splitter (DE ∥ BC)ADDB=AEEC\dfrac{AD}{DB}=\dfrac{AE}{EC}
Similar trianglesADAB=AEAC=DEBC\dfrac{AD}{AB}=\dfrac{AE}{AC}=\dfrac{DE}{BC}
Altitude to the hypotenuseh2=xyh^{2}=xy
Leg rulea2=c⋅xa(xa=segment next to leg a)a^{2}=c\cdot x_a\quad(x_a=\text{segment next to leg }a)
CentroidAG=23AM,GM=13AMAG=\tfrac{2}{3}AM,\quad GM=\tfrac{1}{3}AM

Right Triangles and Trigonometry

Trigonometric ratiossin⁡A=opphyp, cos⁡A=adjhyp, tan⁡A=oppadj\sin A=\dfrac{\text{opp}}{\text{hyp}},\ \cos A=\dfrac{\text{adj}}{\text{hyp}},\ \tan A=\dfrac{\text{opp}}{\text{adj}}
Cofunctionssin⁡A=cos⁡(90∘−A)\sin A=\cos(90^{\circ}-A)
Pythagorean Theorema2+b2=c2a^{2}+b^{2}=c^{2}
45°-45°-90°x:x:x2x : x : x\sqrt{2}
30°-60°-90°x:x3:2xx : x\sqrt{3} : 2x

Area of a Triangle: A = ½ab sin C

Area of any triangleA=12absin⁡CA=\tfrac{1}{2}ab\sin C
Why it worksh=bsin⁡C ⇒ A=12a hh=b\sin C\ \Rightarrow\ A=\tfrac{1}{2}a\,h
Regular n-gon with radius rA=n⋅12r2sin⁡ ⁣(360∘n)A=n\cdot\tfrac{1}{2}r^{2}\sin\!\left(\dfrac{360^{\circ}}{n}\right)
Parallelogram with sides a, b and angle CA=absin⁡CA=ab\sin C

Central, Inscribed and Circumscribed Angles

Central anglem∠AOB=mAB⌢m\angle AOB=m\overset{\frown}{AB}
Inscribed anglem∠ACB=12 mAB⌢m\angle ACB=\tfrac{1}{2}\,m\overset{\frown}{AB}
Circumscribed angle (tangents PA and PB)m∠APB=180∘−m∠AOBm\angle APB=180^\circ-m\angle AOB
Inscribed quadrilateral ABCDm∠A+m∠C=180∘,m∠B+m∠D=180∘m\angle A+m\angle C=180^\circ,\quad m\angle B+m\angle D=180^\circ
Arcs around a circleminor arc+major arc=360∘\text{minor arc}+\text{major arc}=360^\circ

Radii, Chords, Tangents and Secants

Tangent ⟂ radius (tangent PT, center O)OT2+PT2=OP2OT^2+PT^2=OP^2
Tangent segments from PPA=PBPA=PB
Chord at distance d from the centerr2=d2+(c2)2r^2=d^2+\left(\tfrac{c}{2}\right)^2
Intersecting chords AB and CD at EAE⋅EB=CE⋅EDAE\cdot EB=CE\cdot ED
Two secants PAB and PCDPA⋅PB=PC⋅PDPA\cdot PB=PC\cdot PD
Tangent PT and secant PABPT2=PA⋅PBPT^2=PA\cdot PB

Arc Length, Sector Area and Similar Circles

Arc length (central angle θ in degrees)s=θ360∘⋅2πrs=\dfrac{\theta}{360^\circ}\cdot 2\pi r
Sector areaA=θ360∘⋅πr2A=\dfrac{\theta}{360^\circ}\cdot \pi r^2
One proportion for bothθ360∘=s2πr=Aπr2\dfrac{\theta}{360^\circ}=\dfrac{s}{2\pi r}=\dfrac{A}{\pi r^2}
Similar circles with scale factor kC2C1=r2r1=k,A2A1=k2\dfrac{C_2}{C_1}=\dfrac{r_2}{r_1}=k,\qquad \dfrac{A_2}{A_1}=k^2
Perimeter of a sectorP=2r+sP=2r+s

Equations and Graphs of Circles

Standard form(x−h)2+(y−k)2=r2(x-h)^2+(y-k)^2=r^2
Center at the originx2+y2=r2x^2+y^2=r^2
Completing the squarex2+bx=(x+b2)2−(b2)2x^2+bx=\left(x+\tfrac{b}{2}\right)^2-\left(\tfrac{b}{2}\right)^2
General form to center and radiusx2+y2+Dx+Ey+F=0 ⇒ center(−D2,−E2), r2=D24+E24−Fx^2+y^2+Dx+Ey+F=0\ \Rightarrow\ \text{center}\left(-\tfrac{D}{2},-\tfrac{E}{2}\right),\ r^2=\tfrac{D^2}{4}+\tfrac{E^2}{4}-F
On, inside or outsided2=(x−h)2+(y−k)2 compared with r2d^2=(x-h)^2+(y-k)^2\ \text{compared with}\ r^2

Slopes of Parallel and Perpendicular Lines

Slopem=y2−y1x2−x1m=\dfrac{y_2-y_1}{x_2-x_1}
Parallel linesm1=m2m_1=m_2
Perpendicular linesm1⋅m2=−1,m2=−1m1m_1\cdot m_2=-1,\quad m_2=-\dfrac{1}{m_1}
Slope of Ax + By = Cm=−AB(B≠0)m=-\dfrac{A}{B}\quad(B\ne 0)
Point-slope and slope-intercept formsy−y1=m(x−x1),y=mx+by-y_1=m(x-x_1),\qquad y=mx+b

Partitioning a Directed Segment

MidpointM=(x1+x22, y1+y22)M=\left(\dfrac{x_1+x_2}{2},\ \dfrac{y_1+y_2}{2}\right)
Point dividing AB in the ratio m:nP=(x1+mm+n(x2−x1), y1+mm+n(y2−y1))P=\left(x_1+\tfrac{m}{m+n}(x_2-x_1),\ y_1+\tfrac{m}{m+n}(y_2-y_1)\right)
Ratio to fraction of the wayAP:PB=m:n ⇔ AP=mm+n ABAP:PB=m:n\ \Leftrightarrow\ AP=\tfrac{m}{m+n}\,AB
Endpoint from the midpointB=(2xM−xA, 2yM−yA)B=(2x_M-x_A,\ 2y_M-y_A)

Coordinate Proofs, Perimeter and Area

Distanced=(x2−x1)2+(y2−y1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}
Triangle and rectangle areaA△=12bh,Arect=ℓwA_{\triangle}=\tfrac12 bh,\qquad A_{\text{rect}}=\ell w
Right angle testm1⋅m2=−1  or  a2+b2=c2m_1\cdot m_2=-1\ \text{ or }\ a^2+b^2=c^2
Parallelogram testsboth pairs of opposite sides parallel, or diagonals share a midpoint\text{both pairs of opposite sides parallel, or diagonals share a midpoint}
Squarerhombus (four equal sides)+one right angle\text{rhombus (four equal sides)}+\text{one right angle}

Informal Arguments for Circle and Volume Formulas (G.GMD.1)

CircumferenceC=πd=2πrC=\pi d=2\pi r
Circle area from wedgesA≈(12C)r=πr⋅r=πr2A\approx\left(\tfrac12C\right)r=\pi r\cdot r=\pi r^2
Cylinder as a stack of disksV=Bh=πr2hV=Bh=\pi r^2h
Pyramid and cone: one-third of the prism or cylinderV=13Bh,Vcone=13πr2hV=\tfrac13Bh,\qquad V_{\text{cone}}=\tfrac13\pi r^2h
Inscribed regular polygons approach the circleA=12Pa  →  12(2πr)(r)=πr2A=\tfrac12Pa\;\to\;\tfrac12(2\pi r)(r)=\pi r^2

Volume of Cylinders, Pyramids, Cones and Spheres (G.GMD.3)

Prism and cylinderV=Bh,Vcylinder=πr2hV=Bh,\qquad V_{\text{cylinder}}=\pi r^2h
Pyramid and coneV=13Bh,Vcone=13πr2hV=\tfrac13Bh,\qquad V_{\text{cone}}=\tfrac13\pi r^2h
SphereV=43πr3V=\tfrac43\pi r^3
Hemisphere (half a sphere)V=12⋅43πr3=23πr3V=\tfrac12\cdot\tfrac43\pi r^3=\tfrac23\pi r^3
Scaling every length by kVnew=k3 VoldV_{\text{new}}=k^3\,V_{\text{old}}

Cross-Sections and Solids of Rotation (G.GMD.4)

Sphere section at distance d from the centerrsection=R2−d2r_{\text{section}}=\sqrt{R^2-d^2}
Cone or pyramid section parallel to the base, at distance x from the apexrsectionr=xh\dfrac{r_{\text{section}}}{r}=\dfrac{x}{h}
Rotations about a linerectangle→cylinder, right triangle→cone, semicircle→sphere\text{rectangle}\to\text{cylinder},\ \text{right triangle}\to\text{cone},\ \text{semicircle}\to\text{sphere}
Sides of a cross-section of a polyhedronnumber of sides≤number of faces\text{number of sides}\le\text{number of faces}

Using Shapes to Model Objects (G.MG.1)

CylinderV=πr2hV=\pi r^{2}h
ConeV=13πr2hV=\tfrac{1}{3}\pi r^{2}h
Sphere and hemisphereVsphere=43πr3,Vhemisphere=23πr3V_{\text{sphere}}=\tfrac{4}{3}\pi r^{3},\quad V_{\text{hemisphere}}=\tfrac{2}{3}\pi r^{3}
Pyramid and prismVpyramid=13Bh,Vprism=BhV_{\text{pyramid}}=\tfrac{1}{3}Bh,\quad V_{\text{prism}}=Bh
Radius from a circumferenceC=2πr  ⇒  r=C2πC=2\pi r\;\Rightarrow\; r=\dfrac{C}{2\pi}

Density Based on Area (G.MG.2)

Density by areadensity=countarea\text{density}=\dfrac{\text{count}}{\text{area}}
Rearrangedcount=density×area,area=countdensity\text{count}=\text{density}\times\text{area},\quad \text{area}=\dfrac{\text{count}}{\text{density}}
Circle and triangle areasAcircle=πr2,A△=12bhA_{\text{circle}}=\pi r^{2},\quad A_{\triangle}=\tfrac{1}{2}bh
Combined regiondensity=count1+count2area1+area2\text{density}=\dfrac{\text{count}_1+\text{count}_2}{\text{area}_1+\text{area}_2}

Density Based on Volume (G.MG.2)

Density by volumeρ=mV\rho=\dfrac{m}{V}
Rearrangedm=ρV,V=mρm=\rho V,\quad V=\dfrac{m}{\rho}
Hollow solidVmaterial=Vouter−VholeV_{\text{material}}=V_{\text{outer}}-V_{\text{hole}}
Floatingρobject<ρwater  ⇒  the object floats\rho_{\text{object}}<\rho_{\text{water}}\;\Rightarrow\;\text{the object floats}

Design Problems with Constraints (G.MG.3)

Costcost=quantity×unit price\text{cost}=\text{quantity}\times\text{unit price}
Square and cubic units1 ft2=144 in2,1 ft3=1,728 in3,1 yd3=27 ft31\text{ ft}^{2}=144\text{ in}^{2},\quad 1\text{ ft}^{3}=1{,}728\text{ in}^{3},\quad 1\text{ yd}^{3}=27\text{ ft}^{3}
Surface area of a rectangular boxSA=2(ℓw+ℓh+wh)SA=2(\ell w+\ell h+wh)
Percent of a container left emptyVcontainer−VfilledVcontainer×100%\dfrac{V_{\text{container}}-V_{\text{filled}}}{V_{\text{container}}}\times 100\%