North Carolina EOC NC Math 1 and NC Math 3 · Math · NC Math 1
NC Math 1: Study Guide
NC Math 1 on the North Carolina End-of-Course (EOC) test, built on the NC Standard Course of Study. The real test is taken online in one sitting of about 3 hours: 50 scored questions, the first 15 without a calculator and the rest with a graphing calculator, in multiple-choice and gridded (typed-number) formats, with no reference sheet. The EOC counts for at least 20% of the course grade. Here the calculator-inactive questions come first too; the timer is a practice target.
01.03 Number and Quantity, and Algebra (NC Math 1)
This topic covers the Number and Quantity, and Algebra domain of the NC Math 1 End-of-Course test, about 36–40% of the scored items: integer exponents, parts of expressions and polynomial operations, linear equations, inequalities and formulas, solving quadratics by square roots and factoring, and systems with their graphs. The NC Math 1 EOC is taken online in one sitting with 180 minutes scheduled (up to 240) and has 50 scored items plus 10 field-test items, in multiple choice A–D and typed (gridded) answers; it counts for at least 20% of your final course grade. The first 15 scored items are calculator-inactive and you cannot go back to them once you start the calculator-active part, where a graphing calculator (Desmos online or an approved handheld) is used. No reference sheet is provided, so know these rules and facts yourself.
NC Math 1 asks you to rewrite expressions with integer exponents (positive, zero and negative) using the properties of exponents, to name the parts of an expression (terms, factors, coefficients, constant) and explain what they mean in a real situation, and to add and subtract quadratic expressions and add, subtract and multiply linear expressions. When you multiply powers of the same base, add the exponents; when you divide, subtract them; when you raise a power to a power, multiply them. A negative exponent means a reciprocal, not a negative number, and any nonzero base to the zero power is 1. Common traps: multiplying exponents when you should add them, forgetting to raise the coefficient to the power, and not distributing a subtraction sign to every term of the second expression. NC Math 1 does not use rational exponents or simplify radicals.
Key formulas
Product of powers
xm⋅xn=xm+n
Quotient of powers
xnxm=xm−n,x=0
Power rules
(xm)n=xmn,(xy)n=xnyn
Zero and negative exponents
x0=1,x−n=xn1,x=0
Multiplying linear expressions
(px+q)(rx+s)=prx2+(ps+qr)x+qs
Subtracting expressions
(A)−(B+C)=A−B−C
Multiplying monomials
Method. To multiply monomials, multiply the coefficients and add the exponents of each base.
Worked example. Which expression is equivalent to (−2x3)(5x4)?
(A) −10x12
(B) −10x7
(C) 3x7
(D) 10x7
AnswerB — −10x7
Step-by-step
Multiply the coefficients: −2 × 5 = −10.
Multiply the powers of x by adding exponents: x3 · x4 = x3+4 = x7.
The product is −10x7.
Fast methodCoefficients multiply; exponents of the same base add.
Quick checkCheck with x = 1: (−2)(5) = −10 and −10(1)7 = −10 ✓.
Why the other choices are wrong
A (−10x12): multiplied the exponents 3 and 4 instead of adding them
C (3x7): added the coefficients −2 and 5 instead of multiplying them
D (10x7): dropped the negative sign of −2
Negative exponents in a quotient
Method. Subtract exponents of the same base when dividing, then rewrite negative exponents as reciprocals.
Worked example. Which expression is equivalent to x−3y5 ÷ (x2y−1), where x ≠ 0 and y ≠ 0?
(A) y4/x5
(B) y6/x
(C) y6/x5
(D) x5y6
AnswerC — y6/x5
Step-by-step
Subtract exponents of the same base: x−3−2 = x−5.
For y: y5+1 = y6.
A negative exponent means a reciprocal: x−5 = 1/x5. The expression is y6/x5.
Fast methodMove each factor with a negative exponent across the fraction bar and make the exponent positive: y5 · y / (x2 · x3).
Quick checkCheck with x = 1, y = 2: 25 ÷ 2−1 = 32 × 2 = 64, and 26/15 = 64 ✓.
Why the other choices are wrong
A (y4/x5): subtracted the y-exponents as 5 − 1 instead of 5 − (−1)
B (y6/x): found the x-exponent as −3 + 2 instead of −3 − 2
D (x5y6): wrote x−5 as x5 in the numerator instead of moving it to the denominator
Interpreting an exponential expression
Method. In a(b)t, a is the starting amount and b is the factor for each time period; the percent change is the distance of b from 1.
Worked example. The value, in dollars, of a used car t years after it is bought is given by the expression 18,000(0.85)t. Which statement about the car is true?
(A) The car loses 15% of its value each year.
(B) The car loses 85% of its value each year.
(C) The car loses $2,700 of value each year.
(D) The car is worth $18,000 after 1 year.
AnswerA — The car loses 15% of its value each year.
Step-by-step
18,000 is the value when t = 0, the price when the car is bought.
Each year the value is multiplied by 0.85, so the car keeps 85% of its value.
It keeps 85%, so it loses 100% − 85% = 15% of its value each year. The loss in dollars gets smaller each year: $2,700 in year 1, then 15% of $15,300 = $2,295 in year 2.
Fast methodGrowth factor b < 1 means decay; the percent lost is 1 − b = 0.15.
Quick checkCheck: 18,000(0.85) = 15,300, and 18,000 − 15,300 = 2,700, which is 15% of 18,000 ✓.
Why the other choices are wrong
B (The car loses 85% of its value each year.): read the factor 0.85 as the percent lost instead of the percent kept
C (The car loses $2,700 of value each year.): treated the decrease as the same dollar amount each year (15% of $18,000) instead of 15% of the current value
D (The car is worth $18,000 after 1 year.): took 18,000 as the value after 1 year instead of the value when t = 0
Linear Equations, Inequalities and Formulas
You write equations and inequalities in one variable from a situation and solve them, write equations in two variables that relate quantities, explain each step of a solution with a property of equality, and solve a formula for one of its variables. Solve by doing the same operation to both sides: distribute, collect the variable terms on one side, then divide by the coefficient. With an inequality, reverse the sign whenever you multiply or divide by a negative number, and in a word problem decide whether the answer must be a whole number. An equation can have one solution, no solution (the variable terms cancel and a false statement remains), or infinitely many solutions (both sides are the same expression). Common traps: distributing to only the first term in parentheses, forgetting to flip the inequality, and undoing the steps of a formula in the wrong order.
Key formulas
Properties of equality
a=b⇒a+c=b+c,a−c=b−c,ac=bc,ca=cb(c=0)
Reversing an inequality
a<b and c<0⇒ac>bc
Distributive property
a(b+c)=ab+ac
Linear model
y=mx+b(m=rate,b=starting value)
Solving a formula
d=rt⇒t=rd
Solving a linear equation
Method. Distribute, move the variable terms to one side and the constants to the other, then divide by the coefficient.
Worked example. Solve 3(x − 4) = 2x + 5.
(A) x = 9
(B) x = −7
(C) x = 17/5
(D) x = 17
AnswerD — x = 17
Step-by-step
Distribute: 3x − 12 = 2x + 5.
Subtract 2x from both sides: x − 12 = 5.
Add 12 to both sides: x = 17.
Fast methodDistribute, collect x on one side, then undo the constant.
A (x = 9): multiplied only x by 3, writing 3x − 4 = 2x + 5
B (x = −7): subtracted 12 instead of adding it after getting x − 12 = 5
C (x = 17/5): added 2x to both sides instead of subtracting it, getting 5x − 12 = 5
Solving a linear inequality
Method. Solve like an equation, but reverse the inequality sign whenever you multiply or divide both sides by a negative number.
Worked example. Which inequality is the solution of 7 − 2x ≥ 15?
(A) x ≥ −4
(B) x ≤ −11
(C) x ≤ −4
(D) x ≥ 4
AnswerC — x ≤ −4
Step-by-step
Subtract 7 from both sides: −2x ≥ 8.
Divide both sides by −2 and reverse the sign: x ≤ −4.
Fast methodDividing or multiplying by a negative number reverses the inequality.
Quick checkCheck x = −5: 7 + 10 = 17 ≥ 15 ✓; check x = 0: 7 ≥ 15 is false, and 0 is not in x ≤ −4 ✓.
Why the other choices are wrong
A (x ≥ −4): did not reverse the inequality sign when dividing by −2
B (x ≤ −11): added 7 to both sides instead of subtracting it, getting −2x ≥ 22
D (x ≥ 4): dropped the negative sign on −2x, getting 2x ≥ 8
Writing and solving an inequality
Method. Write the condition as an inequality in one variable, then solve it with inverse operations.
Worked example. Jada’s first three NC Math 1 test scores are 85, 92 and 78. What score must she earn on the fourth test so that the mean of all four scores is at least 86?
(A) at least 87
(B) at least 86
(C) at most 89
(D) at least 89
AnswerD — at least 89
Step-by-step
Let s be the fourth score. The mean is (85 + 92 + 78 + s)/4, and it must be at least 86: (255 + s)/4 ≥ 86.
Multiply both sides by 4: 255 + s ≥ 344.
Subtract 255: s ≥ 89.
Fast methodFour scores averaging 86 total 4 × 86 = 344; she has 255, so she needs 344 − 255 = 89 or more.
Quick checkCheck: (255 + 89)/4 = 344/4 = 86 ✓, and a higher score gives a higher mean.
Why the other choices are wrong
A (at least 87): averaged the mean of the first three scores (85) with the fourth score as if they had equal weight
B (at least 86): assumed the fourth score must equal the target mean
C (at most 89): reversed the inequality when writing the answer
Factoring and Solving Quadratic Equations
In NC Math 1 you solve quadratic equations in only two ways: by taking square roots and by factoring. Factor out a greatest common factor first, then factor the trinomial; the leading coefficient a may be an integer other than 1. Set the equation equal to 0 before you use the zero product property, and connect each factor to a zero of the function and an x-intercept of its graph. When you take a square root, keep both the positive and the negative root; if x2 equals a negative number there is no real solution. In a real situation, reject solutions that do not make sense, such as a negative width or time. The quadratic formula, completing the square and vertex form are not part of NC Math 1, and square roots on the test are perfect squares.
Key formulas
Zero product property
ab=0⇒a=0 or b=0
Square root property
x2=k,k>0⇒x=±k
Difference of squares
a2−b2=(a−b)(a+b)
Factored form and zeros
f(x)=a(x−p)(x−q)⇒zeros p and q
Factoring when a is not 1
ax2+bx+c:find m,n with mn=ac,m+n=b
Solving by square roots
Method. When x2 equals a positive number, take the square root of both sides and keep both the positive and the negative root.
Worked example. What are the solutions of x2 = 49?
(A) x = 7 or x = −7
(B) x = 7 only
(C) x = 24.5 or x = −24.5
(D) x = 49 or x = −49
AnswerA — x = 7 or x = −7
Step-by-step
Take the square root of both sides: x = ±√49.
√49 = 7, so x = 7 or x = −7.
Fast methodx2 = k with k > 0 has two solutions, √k and −√k.
Quick checkCheck: 72 = 49 and (−7)2 = 49 ✓.
Why the other choices are wrong
B (x = 7 only): forgot that a negative number squared is also positive
C (x = 24.5 or x = −24.5): divided 49 by 2 instead of taking the square root
D (x = 49 or x = −49): did not take the square root of 49
Factoring a difference of squares
Method. Factor completely, set each factor equal to zero, and solve each small equation.
Worked example. Solve 9x2 − 25 = 0 by factoring.
(A) x = 5/9 or x = −5/9
(B) x = 5/3 or x = −5/3
(C) x = 25/9 or x = −25/9
(D) x = 5/3 only
AnswerB — x = 5/3 or x = −5/3
Step-by-step
9x2 − 25 is a difference of squares: (3x)2 − 52 = (3x − 5)(3x + 5).
Set each factor equal to 0: 3x − 5 = 0 or 3x + 5 = 0.
x = 5/3 or x = −5/3.
Fast methoda2 − b2 = (a − b)(a + b) with a = 3x and b = 5.
B (−8): did not reject the negative solution, but a width must be positive
C (40/3): divided the area by 3 instead of writing an equation for the area
Systems of Equations and Inequalities and Their Graphs
The graph of an equation in two variables is every point whose coordinates make it true, so the solution of a system is the point (or points) where the graphs meet. Solve linear systems by tables, graphs, substitution or elimination; adding one equation to a multiple of the other gives a new system with the same solution. When one function is exponential or quadratic, solve f(x) = g(x) with a graphing calculator or a table, and report the x-value. For a linear inequality in two variables, draw a solid boundary for ≤ or ≥ and a dashed boundary for < or >, then shade the side that makes the inequality true; a point is in the solution of a system of inequalities only if it makes every inequality true. You also write systems from real situations. Common traps: switching x and y, sign errors when eliminating, and checking only one condition.
Key formulas
Substitution
y=mx+b into Ax+By=C:Ax+B(mx+b)=C
Elimination
scale so one variable has opposite coefficients, then add
Same solution
{E1,E2}and{E1,E2+kE1}have the same solutions
Equal functions
f(x)=g(x)at the x-coordinate where the graphs intersect
Inequality boundary
<,>:dashed;≤,≥:solid
Points on a graph
Method. The graph of an equation in two variables is the set of all points whose coordinates make the equation true.
Worked example. Which point lies on the graph of 2x + y = 5?
(A) (3, −1)
(B) (−1, 3)
(C) (5, 0)
(D) (0, −5)
AnswerA — (3, −1)
Step-by-step
A point is on the graph if its coordinates make the equation true.
(3, −1): 2(3) + (−1) = 6 − 1 = 5 ✓.
The other points give 1, 10 and −5, not 5.
Fast methodSubstitute each point and look for 5.
Quick checkCheck: 2(3) + (−1) = 5 ✓.
Why the other choices are wrong
B ((−1, 3)): switched the x- and y-coordinates of a solution
C ((5, 0)): set y = 0 and forgot to divide 5 by 2
D ((0, −5)): found the y-intercept with the wrong sign
Solving a system by elimination
Method. Elimination: add or subtract the equations (after multiplying if needed) so one variable cancels, solve, then substitute back.
Worked example. What is the solution of the system 3x + 2y = 16 and 5x − 2y = 8?
(A) (3, −3.5)
(B) (3, 7)
(C) (3, 3.5)
(D) (24, −28)
AnswerC — (3, 3.5)
Step-by-step
The y-terms are opposites, so add the equations: 8x = 24, x = 3.
Substitute into 3x + 2y = 16: 9 + 2y = 16, so 2y = 7 and y = 3.5.
The solution is (3, 3.5).
Fast method+2y and −2y cancel when you add.
Quick checkCheck in the second equation: 5(3) − 2(3.5) = 15 − 7 = 8 ✓.
Why the other choices are wrong
A ((3, −3.5)): made a sign error when solving −2y = −7
B ((3, 7)): found 2y = 7 but did not divide by 2
D ((24, −28)): forgot to divide by 8 after adding the equations, using x = 24
Mixture system in context
Method. Write one equation for the total amount and one for the amount of the ingredient, then solve the system.
Worked example. A science teacher mixes a 10% acid solution with a 30% acid solution to make 20 liters of a 25% acid solution. How many liters of the 10% solution does she use?
(A) 15 liters
(B) 5 liters
(C) 10 liters
(D) 12.5 liters
AnswerB — 5 liters
Step-by-step
Let x = liters of 10% and y = liters of 30%. Total: x + y = 20. Acid: 0.10x + 0.30y = 0.25(20) = 5.
Substitute y = 20 − x: 0.10x + 6 − 0.30x = 5, so −0.20x = −1 and x = 5.
She uses 5 liters of the 10% solution (and 15 liters of the 30% solution).
Fast method25% is three-quarters of the way from 10% to 30%, so three-quarters of the mix is the 30% solution: 15 L, leaving 5 L.
Quick checkCheck: 0.10(5) + 0.30(15) = 0.5 + 4.5 = 5 liters of acid, and 5/20 = 25% ✓.
Why the other choices are wrong
A (15 liters): gave the amount of the 30% solution
C (10 liters): split the 20 liters evenly between the two solutions
D (12.5 liters): used one variable for both solutions, writing 0.10x + 0.30x = 5
01.04 Functions (NC Math 1)
This topic covers the Functions domain of North Carolina's NC Math 1 End-of-Course (EOC) test, about a third of the test (32–36%): function notation, domain and range, sequences in explicit and recursive form, key features of linear, quadratic and exponential functions, average rate of change, and building and comparing linear and exponential models. The NC Math 1 EOC is taken online in one sitting: 180 minutes are scheduled (up to 240 allowed) for 50 scored questions plus 10 field-test questions. The first 15 scored questions are calculator-inactive and you cannot return to them; the rest allow a graphing calculator. Questions are multiple choice with four choices (A–D) or ask you to type a number, no reference sheet is given, and the EOC counts for at least 20% of your final course grade.
A function pairs each input with exactly one output; outputs may repeat, but an input may not have two different outputs. f(x) is the output when the input is x, so f(a) = b means the point (a, b) is on the graph. To evaluate, put the input in parentheses before squaring or multiplying; to solve f(x) = b, set the rule equal to b and solve for x. The domain is the set of inputs and the range is the set of outputs. In a real situation, the domain holds only inputs that make sense: whole numbers for counts, and times from when the situation starts until it stops. Common traps: reading f(x) as f times x, switching input and output, and giving the range when the domain is asked for.
Key formulas
Function rule
each input x→exactly one output f(x)
Point on a graph
f(a)=b⟺(a,b)is on the graph of f
Domain and range
domain={inputs},range={f(x):x∈domain}
Evaluate with parentheses
f(x)=x2+bx⇒f(−a)=(−a)2+b(−a)=a2−ab
Identifying a function from ordered pairs
Method. A relation is a function when no input is paired with two different outputs.
Worked example. Which set of ordered pairs represents y as a function of x?
(A) {(−1, 4), (0, 4), (2, 7), (5, 7)}
(B) {(3, 1), (3, 5), (4, 2), (6, 0)}
(C) {(1, 2), (2, 3), (1, 4), (5, 6)}
(D) {(0, 0), (1, 1), (1, −1), (4, 2)}
AnswerA — {(−1, 4), (0, 4), (2, 7), (5, 7)}
Step-by-step
A function gives each input exactly one output. Look for any x-value that appears with two different y-values.
In {(−1, 4), (0, 4), (2, 7), (5, 7)} every x-value appears once. Repeated outputs (4 and 7) are allowed.
Each other set has an x-value (3 or 1) paired with two different y-values, so those are not functions.
Fast methodScan the x-values only: if no x-value repeats with a new y-value, it is a function.
Quick checkCheck: in the chosen set the inputs −1, 0, 2, 5 are all different ✓.
Why the other choices are wrong
B ({(3, 1), (3, 5), (4, 2), (6, 0)}): checked only that the outputs are all different, so missed that the input 3 has two outputs
C ({(1, 2), (2, 3), (1, 4), (5, 6)}): missed the repeated input 1 because its two pairs are not next to each other
D ({(0, 0), (1, 1), (1, −1), (4, 2)}): checked only the outputs, which are all different, and missed that the input 1 is paired with both 1 and −1
Evaluating a function at a negative input
Method. To evaluate f(a), substitute a for every x, using parentheses, then simplify.
Worked example. If g(x) = x² − 3x, what is g(−2)?
(A) 2
(B) −2
(C) 10
(D) −10
AnswerC — 10
Step-by-step
Replace every x with (−2): g(−2) = (−2)² − 3(−2).
(−2)² = 4 and −3(−2) = 6.
g(−2) = 4 + 6 = 10.
Fast methodPut the input in parentheses before you square or multiply.
D (−10): wrote (−2)² as −4 and used −3(−2) = −6, so got −4 − 6 = −10
Domain of a function in context
Method. In a context, the domain is the set of input values that make sense; find where the situation starts and stops.
Worked example. A ball is kicked straight up from the ground. Its height, in feet, t seconds after the kick is h(t) = −16t² + 64t, until the ball lands. Which describes the domain of h in this situation?
(A) 0 ≤ t ≤ 2
(B) 0 ≤ t ≤ 4
(C) 0 ≤ h ≤ 64
(D) t ≥ 0
AnswerB — 0 ≤ t ≤ 4
Step-by-step
The domain is the set of times the model is used: from the kick until the ball lands.
The ball is on the ground when h(t) = 0: −16t² + 64t = 0, so −16t(t − 4) = 0.
t = 0 (the kick) or t = 4 (the landing).
So the domain is 0 ≤ t ≤ 4.
Fast methodFactor out −16t to find when the height is 0; the domain runs between those times.
A (0 ≤ t ≤ 2): stopped at t = 2, the time of the greatest height, instead of the time it lands
C (0 ≤ h ≤ 64): gave the possible heights (the range) instead of the possible times
D (t ≥ 0): ignored that the ball lands; after t = 4 the formula gives negative heights
Sequences as Functions
A sequence is a function whose inputs are the term numbers n = 1, 2, 3, …; aₙ is the nth term. An arithmetic sequence adds the same common difference d each time; a geometric sequence multiplies by the same common ratio r. NC Math 1 uses subscript notation. Recursive form gives the first term and the rule from one term to the next; explicit form gives aₙ directly from n. To go from recursive to explicit, use n − 1 steps from a₁; to go from explicit to recursive, find a₁ by putting n = 1 and read d from the coefficient of n. Common traps: using n instead of n − 1, leaving out the first term in a recursive formula, and counting terms instead of steps between two given terms.
Key formulas
Arithmetic, explicit
an=a1+(n−1)d
Arithmetic, recursive
a1given,an=an−1+d(n≥2)
Geometric, explicit
an=a1⋅rn−1
Geometric, recursive
a1given,an=r⋅an−1(n≥2)
Difference from two terms
d=q−paq−ap
Writing a recursive formula
Method. Recursive form gives the first term and how to get each term from the one before it.
Worked example. Which recursive formula defines the sequence 7, 11, 15, 19, … for n ≥ 2?
(A) a₁ = 4, aₙ = aₙ₋₁ + 7
(B) a₁ = 7, aₙ = 4 · aₙ₋₁
(C) a₁ = 11, aₙ = aₙ₋₁ + 4
(D) a₁ = 7, aₙ = aₙ₋₁ + 4
AnswerD — a₁ = 7, aₙ = aₙ₋₁ + 4
Step-by-step
The first term is a₁ = 7.
Each term is 4 more than the term before it: 11 − 7 = 4, 15 − 11 = 4.
So a₁ = 7 and aₙ = aₙ₋₁ + 4.
Fast methodA recursive formula needs two parts: the first term and the rule from one term to the next.
A (82): divided 20 by 5 (the number of terms from a₃ to a₇) instead of 4 (the number of steps), so used d = 4
B (109): treated a₃ as the first term and added 19 differences: 14 + 19 × 5
C (134): added 20 differences to a₇: 34 + 20 × 5
Key Features, Rate of Change, and Quadratic Forms
Key features of a function are its intercepts, where it is increasing or decreasing, where it is positive or negative, its maximum or minimum, and its end behavior. The average rate of change from x = a to x = b is the change in output divided by the change in input. NC Math 1 uses only two forms of a quadratic. Standard form ax² + bx + c shows the y-intercept c and whether the parabola opens up (a > 0, a minimum) or down (a < 0, a maximum). Factored form a(x − p)(x − q) shows the zeros p and q, and the vertex has x-value halfway between the zeros. The quadratic formula, completing the square and vertex form are not used in NC Math 1. Common traps: wrong signs on zeros from factors such as (x + p), describing intervals with y-values instead of x-values, and forgetting to divide by the change in x.
Key formulas
Average rate of change
b−af(b)−f(a)
Zeros from factored form
f(x)=a(x−p)(x−q)⇒x=porx=q
Vertex x-value
xvertex=2p+q
y-intercept of standard form
f(x)=ax2+bx+c⇒f(0)=c
Opening and end behavior
a>0:opens up, minimum;a<0:opens down, maximum
Zeros from factored form
Method. In factored form a(x − p)(x − q), the zeros are x = p and x = q.
Worked example. What are the zeros of f(x) = (x − 5)(x + 2)?
(A) x = 5 and x = −2
(B) x = −5 and x = 2
(C) x = 5 and x = 2
(D) x = −10 only
AnswerA — x = 5 and x = −2
Step-by-step
A zero is an x-value that makes f(x) = 0.
A product is 0 when a factor is 0: x − 5 = 0 or x + 2 = 0.
So x = 5 or x = −2.
Fast methodSet each factor equal to 0; the zero has the opposite sign of the number in the factor.
A (x = −1/2 and x = 3): factored correctly but changed the sign of both zeros
B (x = 1 and x = −3): solved 2x − 1 = 0 as x = 1, forgetting to divide by 2
D (x = −3/2 and x = 1): used the factors (2x + 3)(x − 1), whose middle term is x, not 5x
Linear and Exponential Models
A linear function f(x) = ax + b changes by the same amount over equal intervals: a is the rate of change and b is the starting value. An exponential function g(x) = a · bˣ changes by the same factor over equal intervals: a is the starting value and b is the growth factor. If b > 1 the growth rate is b − 1; if 0 < b < 1 the decay rate is 1 − b. Build a function from two points or a description, check a table for equal differences (linear) or equal ratios (exponential), and combine functions by adding, subtracting, or multiplying two linear functions. An exponential function a · bˣ with a > 0 and b > 1 eventually exceeds any linear or quadratic function. Common traps: reading the growth factor as the percent rate, using a table step of 2 as if it were 1, and forgetting to subtract every term of a function.
Key formulas
Linear model
f(x)=ax+b,a=x2−x1y2−y1
Exponential model
g(x)=a⋅bx,a=g(0)
Growth and decay rates
b>1:r=b−1;0<b<1:r=1−b
Combining functions
(f±g)(x)=f(x)±g(x),(f⋅g)(x)=f(x)⋅g(x)
Linear or exponential
equal differences⇒linear;equal ratios⇒exponential
Growth rate of an exponential function
Method. For f(x) = a · bˣ with b > 1, the growth rate is b − 1; with 0 < b < 1, the decay rate is 1 − b.
Worked example. The function f(x) = 200(1.06)x models the number of members of a club x years after it started. Which statement describes f?
(A) The number of members increases by 6% each year.
(B) The number of members increases by 106% each year.
(C) The number of members increases by 1.06% each year.
(D) The number of members increases by 6 each year.
AnswerA — The number of members increases by 6% each year.
Step-by-step
In f(x) = a · bˣ, b is the growth factor. Here b = 1.06.
b is greater than 1, so f shows growth.
The growth rate is b − 1 = 0.06, which is 6% per year.
Quick checkCheck: one year from 200 members gives 200 × 1.06 = 212, which is 6% more ✓.
Why the other choices are wrong
B (The number of members increases by 106% each year.): used the growth factor 1.06 as the percent rate
C (The number of members increases by 1.06% each year.): read the growth factor 1.06 as a percent
D (The number of members increases by 6 each year.): treated the model as linear, adding instead of multiplying
Exponential function from a table with steps of 2
Method. Equal differences over equal intervals mean linear; equal ratios over equal intervals mean exponential.
Worked example. A table shows these values of a function: when x = 0, y = 3; when x = 2, y = 12; when x = 4, y = 48; when x = 6, y = 192. Which function fits the table?
(A) y = 3 · 4x
(B) y = 4.5x + 3
(C) y = 12 · 2x
(D) y = 3 · 2x
AnswerD — y = 3 · 2x
Step-by-step
The ratios 12 ÷ 3, 48 ÷ 12 and 192 ÷ 48 are all 4, so the function is exponential.
But x goes up by 2 each time, so the factor 4 is for 2 units: b² = 4, so b = 2.
The starting value at x = 0 is 3, so y = 3 · 2ˣ.
Fast methodEqual ratios over equal steps mean exponential; find the factor for one unit of x.
Quick checkCheck: x = 4 gives 3 · 16 = 48 ✓ and x = 6 gives 3 · 64 = 192 ✓.
Why the other choices are wrong
A (y = 3 · 4x): used the ratio 4 as the factor for each 1 unit, but the table goes up 2 units at a time
B (y = 4.5x + 3): treated the table as linear using the first difference 9 over 2 units
C (y = 12 · 2x): used the y-value 12 at x = 2 as the starting value
Multiplying two linear functions in context
Method. Revenue = price × quantity; to combine functions by multiplication, multiply every term of one by every term of the other.
Worked example. A shop sells phone cases. If it makes x price cuts of $1, the price of a case is p(x) = 20 − x dollars and it sells n(x) = 3x + 30 cases each day. The daily revenue is R(x) = p(x) · n(x). Which expression is R(x)?
Fast methodUse the distributive property on all four pairs of terms, then combine the x-terms.
Quick checkCheck with x = 0: R(0) = 20 × 30 = 600, and the expression gives 600 ✓.
Why the other choices are wrong
A (−3x² + 600): multiplied only the x-terms together (−x · 3x) and the constants together (20 · 30), leaving out 20 · 3x and −x · 30
C (−3x² + 90x + 600): added 60x and 30x instead of 60x and −30x
D (2x + 50): added the two functions instead of multiplying them
01.05 Coordinate Geometry and Statistics (NC Math 1)
This topic covers the NC Math 1 coordinate geometry and statistics standards: using coordinates to find lengths, perimeters and areas and to classify triangles and quadrilaterals (NC.M1.G-GPE.4), slopes of parallel and perpendicular lines (G-GPE.5), midpoints, endpoints and equal parts of a segment (G-GPE.6), and describing data, fitting linear and exponential models, residuals, the correlation coefficient and association versus causation (S-ID.1, 2, 3, 6a–c, 7, 8, 9). Together these standards are about 29% of the NC Math 1 End-of-Course test (Geometry 8–12%, Statistics and Probability 18–20%). The EOC is taken online in one sitting of 180 minutes scheduled (up to 240) with 50 scored items plus 10 field-test items, multiple choice A–D and typed (gridded) answers, and it counts for at least 20% of the final course grade. The first 15 scored items are calculator-inactive and you cannot go back to them; after that a graphing calculator is used for regression, correlation and standard deviation, and there is no reference sheet, so know the distance, midpoint and slope formulas.
Find horizontal and vertical lengths by subtracting coordinates, and slanted lengths with the distance formula, which is the Pythagorean theorem on the grid. Perimeter is the sum of all the side lengths. For area, use ½ × base × height when a side is horizontal or vertical, length × width for a rectangle, or draw a box around a slanted triangle and subtract the corner right triangles. To classify a shape, compare side lengths (equal sides) and slopes (equal slopes are parallel; slopes with product −1 are perpendicular). North Carolina uses the exclusive trapezoid: exactly one pair of parallel sides. Traps: adding |Δx| + |Δy| instead of using the distance formula, forgetting the square root, and using a slanted side as a height. You may leave a length such as √20 as it is; simplifying radicals is not required in NC Math 1.
Key formulas
Distance formula
d=(x2−x1)2+(y2−y1)2
Horizontal or vertical length
∣x2−x1∣ or ∣y2−y1∣
Area of a triangle
A=21bh
Area and perimeter of a rectangle
A=lw,P=2l+2w
Right-angle test
m1⋅m2=−1⇒the sides are perpendicular
Distance between two points
Method. Find the horizontal and vertical changes, then use the distance formula d = √((Δx)² + (Δy)²).
Worked example. What is the distance between the points (−2, 1) and (4, 9)?
Fast methodVertical side: subtract y-values. Slanted sides: each is a 3-4-5 right triangle, so each is 5.
Quick checkCheck: the two slanted sides are equal (5 and 5), so JKL is isosceles, which fits K being level with the middle of JL ✓.
Why the other choices are wrong
A (22): used |Δx| + |Δy| = 3 + 4 = 7 for each slanted side, giving 7 + 7 + 8
C (12): found the area ½ × 8 × 3 = 12 instead of the perimeter
D (13): added only two of the sides, 5 + 8
Area of a rectangle with slanted sides
Method. Show right angles with slopes whose product is −1, then find the area by drawing a box around the rectangle and subtracting the four corner right triangles.
Worked example. Quadrilateral ABCD has vertices A(−3, 1), B(1, −1), C(4, 5) and D(0, 7). Use slopes to decide whether ABCD is a rectangle. Then find its area in square units.
Opposite sides have equal slopes, and (−1/2) × 2 = −1, so the sides meet at right angles: ABCD is a rectangle.
Draw the smallest box around ABCD with horizontal and vertical sides: x from −3 to 4 (width 7) and y from −1 to 7 (height 8). Its area is 7 × 8 = 56.
Subtract the four corner right triangles: A to B has legs 4 and 2 (area 4); B to C has legs 3 and 6 (area 9); C to D has legs 4 and 2 (area 4); D to A has legs 3 and 6 (area 9). Total 26.
A (56): multiplied the width and height of the box around the figure, 7 × 8 = 56, and did not subtract the corner triangles
B (15): took half of length × width, as for a triangle
D (900): multiplied the squared side lengths, 20 × 45 = 900, instead of the side lengths
Parallel and Perpendicular Slopes, Midpoints and Endpoints
Parallel lines have equal slopes. Perpendicular lines have slopes that are opposite reciprocals: flip the fraction and change the sign, so the product is −1 (a horizontal line is perpendicular to a vertical line). If a line is given in standard form Ax + By = C, solve for y first to read the slope. To write a line through a point, use the slope and the point to find b. The midpoint averages the x-coordinates and the y-coordinates. To find a missing endpoint, move from the known endpoint to the midpoint and make the same move again. To find a point a fraction of the way along a segment, add that fraction of the change to the starting point. Traps: changing only the sign or only taking the reciprocal, halving the difference instead of the sum, and starting from the wrong endpoint.
Key formulas
Slope
m=x2−x1y2−y1
Parallel and perpendicular slopes
m∥=m,m⊥=−m1
Point-slope form
y−y1=m(x−x1)
Midpoint
M=(2x1+x2,2y1+y2)
Missing endpoint
B=(2xM−xA,2yM−yA)
Point a fraction k of the way from A to B
P=(xA+k(xB−xA),yA+k(yB−yA))
Midpoint of a segment
Method. Average the x-coordinates and average the y-coordinates.
Worked example. What is the midpoint of the segment with endpoints (−4, 7) and (10, −3)?
(A) (7, −5)
(B) (6, 4)
(C) (2, 3)
(D) (3, 2)
AnswerD — (3, 2)
Step-by-step
Average the x-coordinates: (−4 + 10)/2 = 6/2 = 3.
Average the y-coordinates: (7 + (−3))/2 = 4/2 = 2.
The midpoint is (3, 2).
Fast methodMidpoint = (average of the x's, average of the y's).
Quick checkCheck: from (−4, 7) to (3, 2) is +7 and −5, and from (3, 2) to (10, −3) is also +7 and −5 ✓.
Why the other choices are wrong
A ((7, −5)): took half of the differences, (10 − (−4))/2 and (−3 − 7)/2, instead of half of the sums
B ((6, 4)): added the coordinates but forgot to divide by 2
C ((2, 3)): found the midpoint (3, 2) but wrote the coordinates in the wrong order
Parallel or perpendicular lines in standard form
Method. Solve each equation for y to read its slope; equal slopes are parallel, slopes with product −1 are perpendicular.
Worked example. Which statement about the lines 3x − 2y = 8 and 4x + 6y = 9 is true?
(A) The slopes are 3/2 and 2/3, so the lines are neither parallel nor perpendicular.
(B) The slopes are 3/2 and −2/3, so the lines are perpendicular.
(C) The slopes are 3 and 4, so the lines are neither parallel nor perpendicular.
(D) The slopes are −3/2 and −2/3, so the lines are neither parallel nor perpendicular.
AnswerB — The slopes are 3/2 and −2/3, so the lines are perpendicular.
Step-by-step
Solve 3x − 2y = 8 for y: −2y = −3x + 8, so y = (3/2)x − 4. The slope is 3/2.
Solve 4x + 6y = 9 for y: 6y = −4x + 9, so y = −(2/3)x + 3/2. The slope is −2/3.
The slopes are not equal, so the lines are not parallel.
(3/2) × (−2/3) = −1, so the lines are perpendicular.
Fast methodFor Ax + By = C, the slope is −A/B: −3/(−2) = 3/2 and −4/6 = −2/3.
Quick checkCheck: 3/2 and −2/3 are reciprocals with opposite signs ✓.
Why the other choices are wrong
A (The slopes are 3/2 and 2/3, so the lines are neither parallel nor perpendicular.): made a sign error solving 4x + 6y = 9 for y and got slope 2/3
C (The slopes are 3 and 4, so the lines are neither parallel nor perpendicular.): read the x-coefficients 3 and 4 as the slopes without solving for y
D (The slopes are −3/2 and −2/3, so the lines are neither parallel nor perpendicular.): made a sign error solving 3x − 2y = 8 for y and got slope −3/2
Perpendicular bisector of a segment
Method. Find the midpoint, find the perpendicular slope (product −1), then write the line through the midpoint.
Worked example. Segment AB has endpoints A(−2, 3) and B(4, −1). Which equation describes the line that is perpendicular to segment AB and passes through its midpoint?
(A) y = (3/2)x − 1/2
(B) y = −(2/3)x + 5/3
(C) y = (3/2)x + 6
(D) y = (2/3)x + 1/3
AnswerA — y = (3/2)x − 1/2
Step-by-step
Midpoint: ((−2 + 4)/2, (3 + (−1))/2) = (1, 1).
Slope of AB: (−1 − 3)/(4 − (−2)) = −4/6 = −2/3.
Perpendicular slope: the opposite reciprocal of −2/3, which is 3/2.
Through (1, 1): 1 = (3/2)(1) + b, so b = −1/2. The line is y = (3/2)x − 1/2.
Fast methodMidpoint first, then flip the slope and change its sign.
B (y = −(2/3)x + 5/3): used the slope of AB itself through the midpoint instead of the perpendicular slope
C (y = (3/2)x + 6): used the perpendicular slope through endpoint A(−2, 3) instead of through the midpoint
D (y = (2/3)x + 1/3): changed the sign of the slope but did not take the reciprocal
Describing Data: Center, Spread and Outliers
Dot plots, histograms and box plots show the shape of a data set. Skew is named for the side of the long tail. Use the mean and standard deviation for roughly symmetric data; use the median and interquartile range (IQR) when the data are skewed or have outliers, because they resist extreme values. Q1 and Q3 are the medians of the lower and upper halves, and the box of a box plot holds the middle half of the data. A value is an outlier if it is more than 1.5 × IQR below Q1 or above Q3. Use the population standard deviation σ when the data are the whole group, and the sample standard deviation s when the data are a sample; the graphing calculator gives both. Adding the same number to every value shifts the mean and median but does not change the standard deviation or IQR. Traps: not sorting before finding the median, adding 1.5 × IQR to the median, and mixing up σ and s.
Key formulas
Mean
xˉ=n∑x
Interquartile range
IQR=Q3−Q1
Outlier fences
Q1−1.5⋅IQRandQ3+1.5⋅IQR
Population standard deviation
σ=n∑(x−μ)2
Sample standard deviation
s=n−1∑(x−xˉ)2
Median of an even number of values
Method. Order the data; the median is the middle value, or the mean of the two middle values when the count is even.
Worked example. The numbers of minutes eight students spent reading one evening were 12, 15, 9, 20, 14, 11, 18 and 16. What is the median number of minutes?
(A) 17
(B) 11
(C) 14.5
(D) 14.375
AnswerC — 14.5
Step-by-step
Put the values in order: 9, 11, 12, 14, 15, 16, 18, 20.
There are 8 values, so the median is the mean of the 4th and 5th values: (14 + 15)/2 = 14.5.
Fast methodSort first; with an even count, average the two middle values.
Quick checkCheck: four values (9, 11, 12, 14) are below 14.5 and four (15, 16, 18, 20) are above ✓.
Why the other choices are wrong
A (17): averaged the two middle numbers of the unsorted list, 20 and 14
B (11): found the range, 20 − 9 = 11
D (14.375): found the mean, 115 ÷ 8 = 14.375, instead of the median
Upper fence for outliers
Method. Compute IQR = Q3 − Q1; a value is an outlier if it is above Q3 + 1.5·IQR or below Q1 − 1.5·IQR.
Worked example. The numbers of text messages sent in one hour by a group of students have this five-number summary: minimum 4, first quartile 10, median 13, third quartile 16, maximum 30. What is the upper fence for outliers, and is 30 an outlier?
Quick checkCheck: the lower fence is 10 − 9 = 1, and 4 > 1, so the minimum is not an outlier; only the high end has one ✓.
Why the other choices are wrong
A (22, so 30 is an outlier): added 1.5 × IQR to the median instead of to Q3: 13 + 9 = 22
B (55, so 30 is not an outlier): used 1.5 × range instead of 1.5 × IQR: 16 + 1.5 × 26 = 55
C (31, so 30 is not an outlier): used Q1 in place of the IQR: 16 + 1.5 × 10 = 31
Population standard deviation
Method. Decide population (σ, divide by n) or sample (s, divide by n − 1), then use technology or the formula.
Worked example. A coach records the goals scored this season by every player on a 6-player team: 3, 5, 7, 7, 9 and 11. The data include the whole team, so they are a population. What is the standard deviation of the goals, to the nearest hundredth?
(A) 2.83
(B) 2.58
(C) 6.67
(D) 2.00
AnswerB — 2.58
Step-by-step
The data are the whole population, so use the population standard deviation σ (divide by n).
Mean: (3 + 5 + 7 + 7 + 9 + 11)/6 = 42/6 = 7.
Squared deviations: 16, 4, 0, 0, 4, 16; their sum is 40.
σ = √(40/6) = √6.67 ≈ 2.58.
Fast methodOn the graphing calculator, one-variable statistics gives σx ≈ 2.58 (and sx ≈ 2.83 for a sample).
A (2.83): used the sample standard deviation s (divided by n − 1 = 5) for population data
C (6.67): found the variance 40/6 ≈ 6.67 and forgot to take the square root
D (2.00): found the mean absolute deviation (4 + 2 + 0 + 0 + 2 + 4)/6 = 2 instead of the standard deviation
Regression, Residuals, Correlation and Causation
Use technology to find the least-squares regression line ŷ = mx + b from paired data. The slope is the predicted change in y for each 1-unit increase in x, and the y-intercept is the predicted y when x = 0, both in the units of the context. A residual is the actual value minus the predicted value: positive means the point is above the line (the model predicted too low). A good model has small residuals scattered with no pattern; a curved (U-shaped) pattern means a linear model is not appropriate. When y-values grow by a nearly constant factor, fit an exponential model y = a·bx with technology; b − 1 is the growth rate. The correlation coefficient r is between −1 and 1: its sign gives the direction and its size, |r|, gives the strength of a linear relationship. A correlation shows association, not causation; a lurking variable may affect both variables. Traps: residual in the wrong order, ignoring the sign of r, and judging a fit by r alone.
Key formulas
Regression line
y^=mx+b
Residual
residual=y−y^
Exponential model
y=a⋅bx,growth rate=b−1
Correlation coefficient
−1≤r≤1
Strength
∣r∣near 1:strong;∣r∣near 0:weak
Interpreting the slope of a regression line
Method. The slope of ŷ = mx + b is the predicted change in y for each 1-unit increase in x, in the units of the context.
Worked example. For a set of used cars, the least-squares regression line ŷ = −1,250x + 18,400 predicts the price ŷ, in dollars, from the age x of the car, in years. What does −1,250 mean in this context?
(A) The predicted price of a new car (age 0) is $1,250.
(B) The predicted price rises by about $1,250 for each year of age.
(C) The predicted price drops by about $1,250 for each additional year of age.
(D) A car loses about $18,400 in value each year.
AnswerC — The predicted price drops by about $1,250 for each additional year of age.
Step-by-step
−1,250 is the slope: the change in predicted price for each increase of 1 in x.
It is negative, so the predicted price goes down $1,250 for each additional year of age.
Fast methodSlope = change in ŷ per 1 unit of x; read the sign for up or down.
Quick checkCheck: the model predicts $18,400 at age 0 and $17,150 at age 1, a drop of $1,250 ✓.
Why the other choices are wrong
A (The predicted price of a new car (age 0) is $1,250.): mixed up the slope with the y-intercept
B (The predicted price rises by about $1,250 for each year of age.): ignored the negative sign of the slope
D (A car loses about $18,400 in value each year.): read the y-intercept 18,400 as the yearly rate
Finding a residual
Method. Substitute x into the regression equation to get ŷ, then residual = y − ŷ.
Worked example. The least-squares line ŷ = 4.2x + 24.5 models the height ŷ, in centimeters, of a plant x weeks after planting. After 6 weeks, one plant was 52 centimeters tall. What is the residual for this plant?
Quick checkCheck: the plant is taller than predicted, so the residual is positive ✓.
Why the other choices are wrong
B (−2.3): subtracted in the wrong order: predicted − observed
C (49.7): gave the predicted value instead of the residual
D (27.5): subtracted only the y-intercept, 52 − 24.5, and left out the slope term
Choosing a linear or an exponential model
Method. Fit each model with technology and look at the residuals: a good model has small residuals with no pattern.
Worked example. A science class counts the cells in a sample each hour. The data, written as (hour, cells in thousands), are (1, 3), (2, 5), (3, 9), (4, 16), (5, 28) and (6, 50). Use technology to fit a linear model and an exponential model. Which statement is best supported?
(A) The linear model fits better, because its correlation coefficient, about 0.93, is close to 1.
(B) Both models fit equally well, because the residuals of each model add to about zero.
(C) The linear model fits better, because its residuals include both positive and negative values.
(D) The exponential model fits better, because the linear residuals form a U-shaped pattern while the exponential residuals are small with no pattern.
AnswerD — The exponential model fits better, because the linear residuals form a U-shaped pattern while the exponential residuals are small with no pattern.
Step-by-step
Linear regression gives about ŷ = 8.89x − 12.6 with r ≈ 0.93.
Its residuals are about 6.7, −0.2, −5.1, −6.9, −3.8 and 9.3: positive, then negative, then positive. This U-shape means the data curve away from the line.
Exponential regression gives about ŷ = 1.66(1.76)x (calculators can differ slightly in the last digit); its residuals are all less than 1 in size, with no pattern.
Each count is about 1.8 times the one before, so the exponential model fits better.
Fast methodCheck the ratios: 5/3, 9/5, 16/9, 28/16 and 50/28 are all about 1.8, a constant factor, which means exponential.
Quick checkCheck: the exponential model gives 1.66 × 1.766 ≈ 49 for hour 6, close to the actual 50 ✓.
Why the other choices are wrong
A (The linear model fits better, because its correlation coefficient, about 0.93, is close to 1.): judged the fit by r alone; a curved pattern can still give r close to 1
B (Both models fit equally well, because the residuals of each model add to about zero.): used the sum of the residuals; a least-squares line's residuals always add to 0, so the sum cannot show which model fits better
C (The linear model fits better, because its residuals include both positive and negative values.): thought mixed signs mean a good fit; the order of the signs (a U-shape) shows the line is the wrong shape