Grade 8 mathematics on the North Carolina End-of-Grade (EOG) test, built on the NC Standard Course of Study for Mathematics. The real test is taken online in one sitting of about 2 hours: 45 scored questions (15 without a calculator, then 30 with a scientific or graphing calculator), in multiple-choice and gridded (typed-number) formats, with no reference sheet. The calculator-inactive part comes first and you cannot return to it; here those questions come first too. Level 3 meets the grade-level standard and Levels 4–5 meet the college-and-career readiness standard. The timer is a practice target.
06.02 Numbers, Equations and Geometry (Grade 8)
This topic covers the grade 8 number system, expressions and equations, and geometry standards: rational and irrational numbers, square and cube roots, integer exponents and scientific notation, linear equations and inequalities, systems of two linear equations, transformations and angle relationships, the Pythagorean theorem, and the volume of cylinders, cones and spheres. The NC EOG Grade 8 Mathematics test is taken online in one sitting of about two hours (120 minutes scheduled, up to 180), with 45 scored items plus 8 field-test items. A calculator-inactive part of 15 items comes first and you cannot go back to it; the remaining 30 items allow a scientific or graphing calculator. Items are multiple choice with choices A–D or gridded response (typed answers here), and there is no reference sheet, so you must know the Pythagorean theorem and the volume formulas yourself.
Real Numbers, Roots, Exponents and Scientific Notation
Every number has a decimal expansion. Rational numbers (fractions of integers) have decimals that end or repeat; irrational numbers, such as π and the square root of a whole number that is not a perfect square, have decimals that never end and never repeat. Estimate a square or cube root by trapping it between perfect squares or cubes, then test tenths; estimate π as about 3.14. Solve x² = p and x³ = p with square and cube roots; know the perfect squares and perfect cubes up to 400. Use the exponent properties on numbers: add exponents when multiplying powers with the same base, subtract when dividing, multiply for a power of a power; a zero exponent gives 1 and a negative exponent gives a reciprocal, not a negative number. In scientific notation the coefficient is at least 1 and less than 10. To multiply or divide, work on the coefficients and the powers of ten separately; when one number is in decimal notation, write it in scientific notation first. Use scientific notation to estimate very large or very small quantities and to say how many times as large one quantity is as another. Traps: calling every square root or every long decimal irrational, and leaving a coefficient of 10 or more (for example, 25.6 × 105 must be rewritten as 2.56 × 106).
Key formulas
Rational vs irrational
rational=ba(a,b integers,b=0);irrational: decimal never ends or repeats
Product and quotient of powers
am⋅an=am+n,anam=am−n
Power of a power
(am)n=amn
Zero and negative exponents
a0=1,a−n=an1(a=0)
Square and cube roots
x2=p⇒x=±p,x3=p⇒x=3p
Scientific notation
a×10n,1≤a<10,n an integer
Locating a square root between whole numbers
Method. Trap a square root between the square roots of the perfect squares just below and just above it.
Worked example. Between which two consecutive whole numbers does √52 lie on a number line?
(A) 7 and 8
(B) 26 and 27
(C) 49 and 64
(D) 51 and 53
AnswerA — 7 and 8
Step-by-step
Find the perfect squares just below and just above 52: 7² = 49 and 8² = 64.
Since 49 < 52 < 64, √49 < √52 < √64, so 7 < √52 < 8.
Fast methodName the nearest perfect squares on each side, then take their square roots.
Quick checkCheck: 7 × 7 = 49 is less than 52 and 8 × 8 = 64 is more than 52 ✓.
Why the other choices are wrong
B (26 and 27): divided 52 by 2 instead of taking the square root
C (49 and 64): gave the perfect squares on either side of 52 instead of their square roots
D (51 and 53): ignored the square root and gave the whole numbers next to 52
Using properties of integer exponents
Method. Keep the base, add exponents for products and subtract exponents for quotients, then evaluate.
Worked example. Which value is equal to (35 × 3−2) ÷ 3−1?
(A) 9
(B) 81
(C) 27
(D) 6,561
AnswerB — 81
Step-by-step
Multiplying powers with the same base adds the exponents: 35 × 3−2 = 33.
Dividing powers with the same base subtracts the exponents: 33 ÷ 3−1 = 33+1 = 34.
34 = 3 × 3 × 3 × 3 = 81.
Fast methodAdd exponents when multiplying, subtract when dividing; subtracting a negative exponent adds.
A (9): added the exponent −1 when dividing instead of subtracting it
C (27): ignored the division by 3−1
D (6,561): multiplied the bases 3 × 3 = 9 while adding the exponents
Multiplying numbers in scientific notation and decimal notation
Method. Write the decimal number in scientific notation, multiply coefficients, add exponents, then adjust the coefficient to be at least 1 and less than 10.
Worked example. A company makes about 4,000,000 memory cards each year. Each card stores about 2.5 × 1012 bytes. About how many bytes can all the cards made in one year store, written in scientific notation?
(A) 6.5 × 1018 bytes
(B) 1 × 1073 bytes
(C) 1 × 1019 bytes
(D) 1 × 1018 bytes
AnswerC — 1 × 1019 bytes
Step-by-step
Write 4,000,000 in scientific notation: 4 × 106.
Multiply the coefficients and add the exponents: (2.5 × 4) × 1012+6 = 10 × 1018.
10 is not less than 10, so rewrite 10 = 1 × 101: the total is 1 × 1019 bytes.
Fast method2.5 × 4 = 10, and one more power of ten moves 1018 to 1019.
A (6.5 × 1018 bytes): added the coefficients 2.5 + 4 instead of multiplying them
B (1 × 1073 bytes): multiplied the exponents 12 × 6 = 72 instead of adding them: 10 × 1072 = 1 × 1073
D (1 × 1018 bytes): rewrote 10 × 1018 as 1 × 1018 without raising the exponent by 1
Linear Equations, Inequalities and Systems
Solve multi-step linear equations and inequalities with the variable on both sides: distribute, combine like terms, then use inverse operations on both sides. When you multiply or divide an inequality by a negative number, reverse the sign. After simplifying, an equation can have exactly one solution (x = a number), no solution (the x-terms cancel and a false statement such as 3 = 7 is left) or infinitely many solutions (both sides are the same expression). In grade 8, a system of two linear equations is given in slope-intercept form, y = mx + b. Its solution is the point where the two graphs intersect: find it by graphing, by a table of values, or by inspection. Lines with the same slope and different y-intercepts are parallel (no solution); the same slope and the same y-intercept give the same line (infinitely many solutions); different slopes give exactly one solution. Traps: distributing to only the first term, forgetting to change every sign after a minus in front of parentheses, and forgetting to reverse an inequality sign.
Key formulas
Variable on both sides
ax+b=cx+d⇒(a−c)x=d−b
One, none or infinitely many
same x-coefficient: equal constants⇒∞;different constants⇒none
Reversing an inequality
if a<b and k<0,then ka>kb
Slope-intercept form
y=mx+b(m=slope,b=y-intercept)
Solution of a system
solution=intersection point (x,y) that makes both equations true
Solving an equation with the variable on both sides
Method. Use inverse operations on both sides to get all x-terms on one side and all constants on the other.
Worked example. What value of x makes 5x − 7 = 2x + 11 true?
(A) x = −6
(B) x = 4/3
(C) x = 18/7
(D) x = 6
AnswerD — x = 6
Step-by-step
Subtract 2x from both sides: 3x − 7 = 11.
Add 7 to both sides: 3x = 18.
Divide both sides by 3: x = 6.
Fast methodCollect the x-terms on one side and the numbers on the other, then divide.
A (x = −6): moved −7 and 11 with the wrong signs, getting 3x = −18
B (x = 4/3): subtracted 7 from 11 instead of adding 7 to both sides, getting 3x = 4
C (x = 18/7): added 2x to 5x instead of subtracting it, getting 7x = 18
Deciding the number of solutions
Method. Simplify each side; compare the x-coefficients and the constants to decide one, none or infinitely many solutions.
Worked example. Which statement is true about the equation 4(x − 2) + 3 = 4x − 5?
(A) It has exactly one solution, x = 0.
(B) It has no solution.
(C) It has infinitely many solutions.
(D) It has exactly one solution, x = 1.
AnswerC — It has infinitely many solutions.
Step-by-step
Distribute: 4(x − 2) = 4x − 8, so the left side is 4x − 8 + 3 = 4x − 5.
The equation becomes 4x − 5 = 4x − 5. Both sides are the same expression.
Every value of x makes it true, so it has infinitely many solutions.
Fast methodSimplify both sides fully. Same expression: infinitely many. Same x-term, different constants: no solution.
Quick checkCheck: x = 0 gives −5 = −5 and x = 10 gives 35 = 35; both work ✓.
Why the other choices are wrong
A (It has exactly one solution, x = 0.): subtracted 4x from both sides, got −5 = −5, and wrote x = 0 as the solution
B (It has no solution.): distributed the 4 only to x, writing 4x − 2 + 3 = 4x + 1, which never equals 4x − 5
D (It has exactly one solution, x = 1.): added the 3 to the x-term (4x + 3 = 7x), giving 7x − 8 = 4x − 5
Interpreting the solution of a system
Method. The solution of a system is the point where the two graphs intersect; find it from a graph or a table and check it in both equations.
Worked example. Gym A charges a $40 joining fee plus $25 per month. Gym B charges a $10 joining fee plus $31 per month. The total cost y, in dollars, after x months is y = 25x + 40 for Gym A and y = 31x + 10 for Gym B. Which ordered pair is the solution of this system and shows when the two gyms cost the same?
(A) (6, 190)
(B) (5, 165)
(C) (30, 790)
(D) (5, 125)
AnswerB — (5, 165)
Step-by-step
Both equations are in slope-intercept form, so compare the costs month by month (a table, or the graph).
x = 3: Gym A 115, Gym B 103. x = 4: Gym A 140, Gym B 134. x = 5: Gym A 165, Gym B 165.
The lines meet at (5, 165): after 5 months both gyms cost $165.
Fast methodGym B gains $6 per month on a $30 head start, so the costs meet after 30 ÷ 6 = 5 months.
A ((6, 190)): chose month 6, the first month Gym B costs more, and used Gym A's cost there
C ((30, 790)): used the $30 difference in joining fees as the number of months
D ((5, 125)): found the right month but left out Gym A's $40 joining fee
Transformations, Congruence, Similarity and Angles
Translations, reflections and rotations are rigid motions: the image is congruent to the original (same side lengths and angle measures). A dilation multiplies every length by the scale factor, so the image is similar but not congruent unless the scale factor is 1. In grade 8, reflections are over the x-axis or the y-axis, rotations are about the origin in multiples of 90° (clockwise or counterclockwise), and dilations are centered at the origin. Two triangles with two pairs of congruent angles are similar (AA); match corresponding sides through the angle pairs, not the letter order. Angle facts: the interior angles of a triangle add to 180°; an exterior angle equals the sum of the two interior angles not next to it; when parallel lines are cut by a transversal, corresponding and alternate interior angles are congruent and same-side interior angles are supplementary. Traps: mixing up clockwise and counterclockwise rules, and using a part of a side instead of the whole side in similar triangles.
∠1+∠2+∠3=180∘,exterior angle=sum of the two remote interior angles
Parallel lines and a transversal
alternate interior≅,corresponding≅,same-side interior sum to 180∘
Reflecting a point over an axis
Method. Apply the coordinate rule for the transformation to each point.
Worked example. Point K(3, −5) is reflected over the y-axis. What are the coordinates of its image K′?
(A) (−3, −5)
(B) (3, 5)
(C) (−3, 5)
(D) (−5, 3)
AnswerA — (−3, −5)
Step-by-step
A reflection over the y-axis keeps the y-coordinate and changes the sign of the x-coordinate: (x, y) → (−x, y).
So K(3, −5) → K′(−3, −5).
Fast methodOver the y-axis, only the x-coordinate changes sign.
Quick checkCheck: K and K′ are both 3 units from the y-axis on the same horizontal line y = −5 ✓.
Why the other choices are wrong
B ((3, 5)): reflected over the x-axis instead of the y-axis
C ((−3, 5)): changed the signs of both coordinates, which is a 180° rotation
D ((−5, 3)): switched the two coordinates
Angles formed by parallel lines and a transversal
Method. Decide whether the angle pair is congruent or supplementary, write the equation, solve, and substitute back.
Worked example. Lines p and q are parallel and are cut by transversal t. Two alternate interior angles measure (3x + 10)° and (5x − 30)°. What is the measure of each of these angles?
(A) 20°
(B) 110°
(C) 85°
(D) 70°
AnswerD — 70°
Step-by-step
When parallel lines are cut by a transversal, alternate interior angles are congruent: 3x + 10 = 5x − 30.
Subtract 3x from both sides and add 30: 40 = 2x, so x = 20.
Each angle is 3(20) + 10 = 70°.
Fast methodAlternate interior angles are equal, so set the expressions equal.
Quick checkCheck: 5(20) − 30 = 70 ✓.
Why the other choices are wrong
A (20°): found x but did not substitute it back into the angle expression
B (110°): found the supplement of the angle
C (85°): set the two angles' sum equal to 180°, treating alternate interior angles as supplementary
A sequence of transformations
Method. Apply the transformations one at a time, in the order given, using each coordinate rule.
Worked example. Point P(4, 1) is rotated 270° counterclockwise about the origin. The image is then reflected over the x-axis. What are the coordinates of the final image?
(A) (−1, −4)
(B) (1, 4)
(C) (1, −4)
(D) (−4, 1)
AnswerB — (1, 4)
Step-by-step
A 270° counterclockwise rotation about the origin uses (x, y) → (y, −x): P(4, 1) → (1, −4).
A reflection over the x-axis uses (x, y) → (x, −y): (1, −4) → (1, 4).
The final image is (1, 4).
Fast method270° counterclockwise is the same as 90° clockwise.
Quick checkCheck: (4, 1) and (1, −4) are both √17 units from the origin, as a rotation requires ✓.
Why the other choices are wrong
A ((−1, −4)): used the 90° counterclockwise rule (x, y) → (−y, x) instead of the 270° rule
C ((1, −4)): did the rotation but forgot the reflection
D ((−4, 1)): rotated 180° instead of 270°
The Pythagorean Theorem and Volume
In a right triangle with legs a and b and hypotenuse c (the side across from the right angle), a² + b² = c². Use it to find a missing side, to find the distance between two points (the horizontal and vertical distances are the legs), and in real-world problems such as ladders, diagonals and slant heights. The converse says that if a² + b² = c² for the longest side c, the triangle is a right triangle. No formula sheet is given on the NC test, so know the volume formulas: cylinder V = πr²h, cone V = (1/3)πr²h, sphere V = (4/3)πr³. A cone holds one-third of a cylinder with the same radius and height. Traps: using the diameter as the radius, adding the legs instead of their squares, forgetting the final square root, and using a slant height as the height of a cone.
Key formulas
Pythagorean theorem
a2+b2=c2
Distance between two points
d=(x2−x1)2+(y2−y1)2
Volume of a cylinder
V=πr2h
Volume of a cone
V=31πr2h
Volume of a sphere
V=34πr3
Finding the hypotenuse
Method. For a right triangle, a² + b² = c², where c is the side opposite the right angle.
Worked example. A right triangle has legs that are 9 centimeters and 12 centimeters long. What is the length of the hypotenuse?
(A) 21 cm
(B) 225 cm
(C) 15 cm
(D) about 7.9 cm
AnswerC — 15 cm
Step-by-step
Use a² + b² = c²: 9² + 12² = 81 + 144 = 225.
c = √225 = 15, so the hypotenuse is 15 cm.
Fast methodSquare, add, square root.
Quick checkCheck: 15 is longer than each leg, as a hypotenuse must be ✓.
Why the other choices are wrong
A (21 cm): added the two legs
B (225 cm): found c² but did not take the square root
D (about 7.9 cm): subtracted the squares of the legs instead of adding them
Volume of a cylinder
Method. Volume of a cylinder: V = πr²h (area of the circular base times the height).
Worked example. A cylinder has a radius of 4 centimeters and a height of 10 centimeters. To the nearest cubic centimeter, what is its volume?
(A) 168 cm³
(B) 251 cm³
(C) 2,011 cm³
(D) 503 cm³
AnswerD — 503 cm³
Step-by-step
V = πr²h = π × 4² × 10 = 160π.
160π ≈ 502.65, which rounds to 503 cm³.
Fast methodBase area πr², times the height.
Quick checkCheck: 3.14 × 16 × 10 = 502.4, close to 503 ✓.
Why the other choices are wrong
A (168 cm³): used the cone formula, which has a factor of 1/3
B (251 cm³): computed 2πrh, which is the area of the curved side, not the volume
C (2,011 cm³): used the diameter 8 cm in place of the radius
Volume of a composite solid
Method. Split a composite solid into simple solids, find each volume, and add.
Worked example. An ice cream treat is a cone with radius 3 centimeters and height 10 centimeters, topped by half of a sphere with radius 3 centimeters. To the nearest tenth of a cubic centimeter, what is the total volume?
(A) 150.8 cm³
(B) 207.3 cm³
(C) 339.3 cm³
(D) 113.1 cm³
AnswerA — 150.8 cm³
Step-by-step
Cone: V = (1/3)πr²h = (1/3)π × 9 × 10 = 30π.
Half of a sphere: V = (1/2) × (4/3)πr³ = (1/2) × (4/3)π × 27 = 18π.
Total: 30π + 18π = 48π ≈ 150.8 cm³.
Fast methodFind each part in terms of π, add, then multiply by π once.
Quick checkCheck: 48 × 3.14 = 150.72, close to 150.8 ✓.
Why the other choices are wrong
B (207.3 cm³): added a whole sphere instead of half of a sphere
C (339.3 cm³): used the cylinder formula πr²h for the cone
D (113.1 cm³): used r² instead of r³ in the sphere formula
06.03 Functions and Bivariate Data (NC EOG Math Grade 8)
This topic covers grade 8 functions (NC.8.F.1–F.5: what a function is, comparing functions, linear and nonlinear functions, slope-intercept form y = mx + b, and qualitative graphs) and bivariate data (NC.8.SP.1–SP.4: scatter plots, lines of fit, linear models and two-way tables). The NC EOG Mathematics Grade 8 test is taken online in one sitting: 120 minutes are scheduled (up to 180), for 45 scored items plus 8 field-test items. The 15-item calculator-inactive part comes first and you cannot go back to it; the calculator-active part allows a scientific or graphing calculator. Items are multiple choice (A–D) or gridded response, and there is no reference sheet.
Functions, Linear vs. Nonlinear, and Qualitative Graphs (NC.8.F.1, F.3, F.5)
A function is a rule that gives each input exactly one output. A set of ordered pairs, a table or a graph is a function when no input is paired with two different outputs; on a graph, no vertical line crosses it twice. Outputs may repeat. Grade 8 does not require function notation, so equations are written as y = .... A linear function has a straight-line graph and can be written y = mx + b; equal steps in x give equal changes in y. Equations with x², x³ or x in a denominator are nonlinear. When the x-steps in a table are not equal, divide each change in y by its change in x before deciding. To read a graph without numbers, describe where it is increasing (rising left to right), decreasing (falling) or constant (horizontal), and use steepness to compare how fast it changes. Traps: a vertical line x = a number is not a function; a repeated output does not break a function.
Method. Look for an input paired with two different outputs; if there is none, the relation is a function.
Worked example. Which set of ordered pairs represents y as a function of x?
(A) {(1, 3), (2, 5), (1, 7), (4, 9)}
(B) {(0, 2), (3, 2), (5, 2), (8, 2)}
(C) {(6, 1), (6, 2), (6, 3), (6, 4)}
(D) {(2, 4), (−2, 4), (2, −4), (−2, −4)}
AnswerB — {(0, 2), (3, 2), (5, 2), (8, 2)}
Step-by-step
A function pairs each input x with exactly one output y.
In {(0, 2), (3, 2), (5, 2), (8, 2)} the inputs 0, 3, 5 and 8 are all different, so each input has one output.
The output 2 repeats, but repeated outputs are allowed. The other sets each have an input with two outputs.
Fast methodScan the x-values: if no x-value repeats with a different y-value, it is a function.
Quick checkCheck: a vertical line at any x crosses the points of the key at most once ✓.
Why the other choices are wrong
A ({(1, 3), (2, 5), (1, 7), (4, 9)}): missed that the input 1 is paired with two different outputs, 3 and 7
C ({(6, 1), (6, 2), (6, 3), (6, 4)}): thought one repeated input is like one repeated output; the input 6 has four outputs
D ({(2, 4), (−2, 4), (2, −4), (−2, −4)}): looked only at the sizes of the numbers; the input 2 has two outputs, 4 and −4
Explaining why a function is not linear
Method. Make a table with equal x-steps and compare the changes in y.
Worked example. Ty makes a table for y = x² + 1 using x = 0, 1, 2 and 3. Which statement explains why y = x² + 1 is NOT a linear function?
(A) The table does not include the point (0, 0).
(B) The y-values are all positive.
(C) The y-values increase by 1, then 3, then 5, so the rate of change is not constant.
(D) The y-values increase by the same amount, 2, each time.
AnswerC — The y-values increase by 1, then 3, then 5, so the rate of change is not constant.
Step-by-step
Table: x = 0, 1, 2, 3 gives y = 1, 2, 5, 10.
Changes in y for each increase of 1 in x: 2 − 1 = 1, 5 − 2 = 3, 10 − 5 = 5.
A linear function changes by the same amount for equal steps in x. These changes are not equal, so the function is not linear.
Fast methodEqual x-steps with unequal y-changes means not linear.
Quick checkCheck: the points (0, 1), (1, 2) and (2, 5) are not on one line, since the slopes 1 and 3 differ ✓.
Why the other choices are wrong
A (The table does not include the point (0, 0).): thought every linear function must pass through the origin
B (The y-values are all positive.): thought a linear function must have negative values
D (The y-values increase by the same amount, 2, each time.): found the change in the differences (2) and treated it as the change in y
Matching a situation to a graph
Method. Turn each part of the story into a segment: rising, horizontal or falling, with its start and end points.
Worked example. A tank holds 40 gallons. A pump fills the empty tank at a steady rate for 10 minutes until it is full. The tank stays full for 5 minutes. Then a drain empties it at a steady rate in 4 minutes. Which description matches the graph of the water in the tank y (gallons) against time x (minutes)?
(A) A line rising from (0, 0) to (10, 40), a horizontal segment to (15, 40), then a steeper line falling to (19, 0)
(B) A line rising from (0, 0) to (10, 40), a horizontal segment to (15, 40), then a line falling to (25, 0)
(C) A line rising from (0, 0) to (10, 40), a line falling to (14, 0), then a horizontal segment to (19, 0)
(D) A line falling from (0, 40) to (10, 0), a horizontal segment to (15, 0), then a line rising to (19, 40)
AnswerA — A line rising from (0, 0) to (10, 40), a horizontal segment to (15, 40), then a steeper line falling to (19, 0)
Step-by-step
Filling: from 0 to 40 gallons in 10 minutes, so a line from (0, 0) to (10, 40), rate 4 gallons per minute.
Full for 5 minutes: horizontal from (10, 40) to (15, 40).
Draining: 40 gallons in 4 minutes ends at 15 + 4 = 19 minutes, rate −10 gallons per minute.
|−10| > 4, so the falling line is steeper than the rising line.
Fast methodTrack the time at each change: 10, then 10 + 5 = 15, then 15 + 4 = 19.
Quick checkCheck: 4 × 10 = 40 gallons in and 10 × 4 = 40 gallons out ✓.
Why the other choices are wrong
B (A line rising from (0, 0) to (10, 40), a horizontal segment to (15, 40), then a line falling to (25, 0)): assumed draining takes as long as filling, 10 minutes
C (A line rising from (0, 0) to (10, 40), a line falling to (14, 0), then a horizontal segment to (19, 0)): put the events in the wrong order: drained before the full time
D (A line falling from (0, 40) to (10, 0), a horizontal segment to (15, 0), then a line rising to (19, 40)): graphed the empty space in the tank instead of the water
Linear Functions: Rate of Change, Initial Value and Comparing (NC.8.F.2, F.4)
NC grade 8 uses slope-intercept form, y = mx + b. The rate of change m is the change in y for each increase of 1 in x; the initial value b is the value of y when x = 0. From two points, find m as the change in y divided by the change in x, then find b by substituting one point: b = y − mx. From a table, check the x-steps: if x goes up by 2, divide the change in y by 2. In a real-world model, m has units such as dollars per hour and b is the starting amount or fee. To compare two functions given in different ways (equation, table, graph described by points, or words), find m and b for each and compare them one feature at a time. Traps: y = c − kx has initial value c and rate −k; for two decreasing functions, the one whose rate is farther from 0 decreases faster; a first table value is the initial value only if its x is 0.
Key formulas
Slope-intercept form
y=mx+b
Rate of change from two points
m=x2−x1y2−y1
Initial value from a point
b=y−mx
Where the graph meets the axes
x=0⇒y=b,y=0⇒x=−mb
Comparing how fast lines change
∣m1∣>∣m2∣⇒line 1 changes faster
Writing an equation from two points
Method. Find m from the change in y over the change in x, then b from the point where x = 0.
Worked example. A line passes through (0, 4) and (2, 10). Which equation represents the line?
(A) y = 4x + 3
(B) y = 6x + 4
(C) y = (1/3)x + 4
(D) y = 3x + 4
AnswerD — y = 3x + 4
Step-by-step
Rate of change: (10 − 4) ÷ (2 − 0) = 6 ÷ 2 = 3.
The point (0, 4) is on the y-axis, so the initial value is 4.
y = 3x + 4.
Fast methodA point with x = 0 gives b directly.
Quick checkCheck: x = 2 gives 3 × 2 + 4 = 10 ✓.
Why the other choices are wrong
A (y = 4x + 3): switched the rate of change and the initial value
B (y = 6x + 4): used the change in y, 6, without dividing by the change in x, 2
C (y = (1/3)x + 4): divided the change in x by the change in y
Finding the initial value in a context
Method. Use two (x, y) pairs to find m, then b = y − mx.
Worked example. A gym charges a one-time sign-up fee plus the same amount each month. The total cost is $95 after 3 months and $175 after 7 months. What is the sign-up fee?
(A) $35
(B) $20
(C) $60
(D) $31.67
AnswerA — $35
Step-by-step
Monthly charge (rate of change): (175 − 95) ÷ (7 − 3) = 80 ÷ 4 = $20 per month.
Fast methodRate first, then work back from one point to x = 0.
Quick checkCheck: 20 × 7 + 35 = 175 ✓.
Why the other choices are wrong
B ($20): gave the monthly charge instead of the sign-up fee
C ($60): gave the cost of 3 months of monthly charges, 3 × $20
D ($31.67): divided $95 by 3 months as if there were no sign-up fee
Comparing two decreasing functions
Method. Write each function's rate and initial value side by side, then compare each pair.
Worked example. Tank A has 300 liters of water and loses 12 liters each minute. For Tank B, the liters of water y after x minutes is y = −15x + 280. Which statement is true?
(A) Tank A drains faster because it starts with more water.
(B) Tank A drains faster because −12 is greater than −15.
(C) Tank B starts with more water and drains faster.
(D) Tank B drains faster, but Tank A starts with more water.
AnswerD — Tank B drains faster, but Tank A starts with more water.
Step-by-step
Tank A: rate −12 liters per minute, initial value 300 liters.
Tank B: rate −15 liters per minute, initial value 280 liters.
15 > 12, so Tank B loses water faster; 300 > 280, so Tank A starts with more.
Fast methodFor decreasing functions compare the sizes of the rates, ignoring the minus signs.
Quick checkCheck: after 1 minute A has lost 12 L and B has lost 15 L ✓.
Why the other choices are wrong
A (Tank A drains faster because it starts with more water.): compared the initial values, 300 and 280, instead of the rates
B (Tank A drains faster because −12 is greater than −15.): compared the signed rates; the faster drain has the rate farther from 0
C (Tank B starts with more water and drains faster.): misread the initial values: 280 is less than 300
Scatter Plots, Lines of Fit and Linear Models (NC.8.SP.1, SP.2, SP.3)
A scatter plot shows pairs of numerical data. Describe its pattern: positive association (y tends to rise as x rises), negative association (y tends to fall), or no association; linear (points lie near a line) or nonlinear (points follow a curve); clusters; and outliers (points far from the pattern). A line of fit is a straight line drawn close to the points, with about as many points above as below; it is chosen informally, not with a calculator regression. Write its equation from two points on the line. Use the model y = mx + b to predict: substitute x to predict y, or set y to a value and solve for x. The slope is the predicted change in y for each 1-unit increase in x; the y-intercept is the predicted y when x = 0. Traps: a prediction is not an exact value; keep units (for example, hundreds of dollars); actual minus predicted tells whether a point is above (positive) or below (negative) the line.
Key formulas
Positive association
x↑⇒y↑
Negative association
x↑⇒y↓
Line of fit
y=mx+b
Prediction
predicted y=m⋅(given x)+b
Above or below the line
actual−predicted>0⇒above
Finding an outlier
Method. An outlier is a point far away from the pattern of the other points.
Worked example. A scatter plot shows hours practiced x and points scored y for six players: (1, 4), (2, 6), (3, 7), (4, 9), (5, 11) and (6, 3). Which point is an outlier?
(A) (1, 4)
(B) (5, 11)
(C) (6, 3)
(D) (3, 7)
AnswerC — (6, 3)
Step-by-step
The first five points rise by about 2 for each hour.
Following the trend, 6 hours should give about 13 points.
(6, 3) is far below the pattern, so it is the outlier.
Fast methodFind the trend first, then the point that is far from it.
Quick checkCheck: without (6, 3) the points show a clear positive linear association ✓.
Why the other choices are wrong
A ((1, 4)): chose the point with the least x-value; it follows the trend
B ((5, 11)): chose the highest point; it follows the trend
D ((3, 7)): chose the middle point; it follows the trend
Using a line of fit through two points
Method. Write the line of fit as y = mx + b, then substitute the given x.
Worked example. A line of fit for data on hours studied x and test score y passes through (10, 62) and (30, 74). Use the line of fit to predict the score for 25 hours of study.
(A) 77
(B) 71
(C) 68
(D) 87
AnswerB — 71
Step-by-step
Slope: (74 − 62) ÷ (30 − 10) = 12 ÷ 20 = 0.6.
Initial value: 62 − 0.6 × 10 = 56, so y = 0.6x + 56.
Prediction: 0.6 × 25 + 56 = 15 + 56 = 71.
Fast methodFrom (30, 74), 5 fewer hours lowers the score by 0.6 × 5 = 3: 74 − 3 = 71.
Quick checkCheck: 0.6 × 30 + 56 = 74 ✓.
Why the other choices are wrong
A (77): used 62 as the initial value: 0.6 × 25 + 62
C (68): averaged the two scores, 62 and 74
D (87): found the slope as the change in x ÷ the change in y, 20 ÷ 12
Solving a linear model for an input
Method. To find when a model reaches a value, set y equal to it and solve for x.
Worked example. A line of fit y = −2.4x + 96 models the percent of battery left y on a phone after x hours of video. Which statement is supported by the model?
(A) The model predicts the battery is empty after 230.4 hours of video.
(B) The model predicts the phone starts with 2.4 percent battery.
(C) The model predicts 93.6 percent battery left after 10 hours.
(D) The model predicts the battery is empty after 40 hours of video.
AnswerD — The model predicts the battery is empty after 40 hours of video.
Step-by-step
Empty means y = 0: 0 = −2.4x + 96.
2.4x = 96, so x = 96 ÷ 2.4 = 40 hours.
The other statements: the start is 96 percent, and after 10 hours the model gives 96 − 24 = 72 percent.
Fast methodAsk how many 2.4s are in 96.
Quick checkCheck: −2.4 × 40 + 96 = 0 ✓.
Why the other choices are wrong
A (The model predicts the battery is empty after 230.4 hours of video.): multiplied 96 by 2.4 instead of dividing
B (The model predicts the phone starts with 2.4 percent battery.): switched the slope and the y-intercept
C (The model predicts 93.6 percent battery left after 10 hours.): subtracted the rate 2.4 once instead of 10 times
Two-Way Tables and Relative Frequency (NC.8.SP.4)
A two-way table sorts one group by two categorical variables, such as grade and club. Each cell is a count; row and column totals add up to the grand total, so a missing cell can be found by subtracting. A relative frequency is a count divided by a total. Decide which total the question names: 'of the 8th graders' means divide by the 8th-grade row total; 'of the students who chose art' means divide by the art column total; 'of all students' means divide by the grand total. To decide whether two variables are associated, compare the relative frequencies of the rows (or of the columns); very different percents suggest an association, about equal percents suggest none. Traps: comparing counts when the groups have different sizes; dividing by the wrong total. (NC does not require segmented bar graphs.)
Key formulas
Row relative frequency
row totalcell
Column relative frequency
column totalcell
Relative frequency of the whole table
grand totalcell
Percent
relative frequency×100%
Association
row percents differ a lot⇒association
Reading a two-way table
Method. Find the row or column the question names and add its cells.
Worked example. A two-way table shows 160 eighth graders. Students with a smartphone: 48 have a school-night bedtime and 72 do not. Students without a smartphone: 24 have a school-night bedtime and 16 do not. How many of the students have a school-night bedtime?
(A) 48
(B) 72
(C) 120
(D) 160
AnswerB — 72
Step-by-step
The bedtime column has 48 (smartphone) and 24 (no smartphone).
48 + 24 = 72.
Fast methodAdd down the column you are asked about.
Quick checkCheck: the no-bedtime column is 72 + 16 = 88, and 72 + 88 = 160 ✓.
Why the other choices are wrong
A (48): read only the smartphone row
C (120): gave the total for students with a smartphone
D (160): gave the total number of students
Row relative frequency
Method. The words after 'of' name the group that goes in the denominator.
Worked example. Use the same table: students with a smartphone, 48 bedtime and 72 no bedtime; students without a smartphone, 24 bedtime and 16 no bedtime. Of the students with a smartphone, what percent have a school-night bedtime?
(A) 30%
(B) about 67%
(C) 40%
(D) 60%
AnswerC — 40%
Step-by-step
The group is students with a smartphone: 48 + 72 = 120.
48 ÷ 120 = 0.4 = 40%.
Fast method'Of the students with ...' tells you the denominator.
Quick checkCheck: 40% + 60% = 100% of the smartphone row ✓.
Why the other choices are wrong
A (30%): divided by all 160 students instead of the 120 with a smartphone
B (about 67%): divided by the 72 students in the bedtime column
D (60%): found the percent with no bedtime
Deciding whether there is an association
Method. Find the relative frequency in each row and compare them; a big difference suggests an association.
Worked example. A survey of 150 adults asked whether they exercise regularly and whether they sleep at least 7 hours a night. Exercise regularly: 60 sleep 7 or more hours, 30 sleep less. Do not exercise regularly: 21 sleep 7 or more hours, 39 sleep less. Which conclusion is supported by the data?
(A) There is an association: about 67% of adults who exercise sleep 7 or more hours, compared with 35% of adults who do not.
(B) There is no association: 81 of the 150 adults sleep 7 or more hours, which is about half.
(C) There is an association: 60 is about 3 times 21, so exercisers are about 3 times as likely to sleep 7 or more hours.
(D) There is an association: 60% of adults who exercise sleep 7 or more hours, compared with 21% of adults who do not.
AnswerA — There is an association: about 67% of adults who exercise sleep 7 or more hours, compared with 35% of adults who do not.
The percents are far apart, so there is an association between exercising and sleeping 7 or more hours.
Fast methodCompare row percents, not counts, when the rows have different totals.
Quick checkCheck: 0.67 ÷ 0.35 ≈ 1.9, so exercisers are about twice (not 3 times) as likely ✓.
Why the other choices are wrong
B (There is no association: 81 of the 150 adults sleep 7 or more hours, which is about half.): looked only at the column total instead of comparing the two groups
C (There is an association: 60 is about 3 times 21, so exercisers are about 3 times as likely to sleep 7 or more hours.): compared counts and ignored that the groups have different sizes (90 and 60)
D (There is an association: 60% of adults who exercise sleep 7 or more hours, compared with 21% of adults who do not.): used the counts as if they were percents