Pennsylvania PSSA Mathematics · Math · Grade 4

Grade 4: Study Guide

Grade 4 mathematics on the Pennsylvania System of School Assessment (PSSA), built on PDE's Assessment Anchors and Eligible Content. The real test is taken in two untimed sections (about 70–80 minutes each) with 40 scored multiple-choice questions and 3 open-ended questions scored 0–4, with a calculator on all but the first four questions, and a grade 4 formula sheet. Proficient and Advanced meet the standard. Here open-ended skills appear as multi-step questions with one final answer; the timer is a practice target.

02.01 Base Ten and Algebraic Concepts (Grade 4)

This topic covers the grade 4 PSSA eligible content for Numbers and Operations in Base Ten (place value, reading, writing, comparing and rounding whole numbers through 1,000,000; adding, subtracting, multiplying, dividing and estimating) and Operations and Algebraic Thinking (multiplicative comparison, multi-step word problems, missing symbols, factors, multiples, primes, patterns and function tables). The real Grade 4 PSSA Mathematics test is taken online in two untimed sections of about 70 to 80 minutes each; it has 52 questions, of which 40 multiple-choice or technology-enhanced questions (1 point each) and 3 open-ended questions (4 points each) count toward the score. Questions 1 to 4 of Section 1 are non-calculator, and a calculator is allowed for the rest of the test. Multiple-choice questions have four answer choices, and a grade 4 formula sheet (unit conversions and the rectangle area and perimeter formulas) is provided. Here, questions have four answer choices or ask you to type a number.

Place Value, Forms, Comparing and Rounding

Whole numbers on the grade 4 PSSA go up to 1,000,000. Each place is worth 10 times the place to its right, so a 4 in the thousands place (4,000) is 10 times a 4 in the hundreds place (400). You read and write numbers in standard form (like 250,316), word form (two hundred fifty thousand, three hundred sixteen) and expanded form (200,000 + 50,000 + 300 + 10 + 6). To compare, line up the places and compare at the first place where the digits differ; a number with more digits is greater. To round to any place, look at the digit just to the right: 5 or more rounds up, less than 5 rounds down. Traps: forgetting a 0 for an empty place, comparing only the first digits of numbers of different lengths, and rounding in two steps, which can give the wrong answer.

Key formulas
Each place is 10 times the place to its right1,000,000=10×100,000,1,000=10×1001{,}000{,}000=10\times100{,}000,\quad 1{,}000=10\times100
Expanded form250,316=200,000+50,000+300+10+6250{,}316=200{,}000+50{,}000+300+10+6
Comparison symbolsa<b (less than),a>b (greater than),a=ba<b\ (\text{less than}),\quad a>b\ (\text{greater than}),\quad a=b
Rounding ruledigit to the right≥5⇒round up;<5⇒round down\text{digit to the right}\ge 5\Rightarrow\text{round up};\quad <5\Rightarrow\text{round down}
Example of rounding to the nearest ten thousand381,207≈380,000381{,}207\approx 380{,}000

Writing standard form from expanded form

Method. In standard form every place gets one digit; a missing place gets a 0.

Worked example. Which number is 600,000 + 40,000 + 3,000 + 20 + 5?

  • (A) 643,025
  • (B) 643,250
  • (C) 64,325
  • (D) 640,325
AnswerA — 643,025
Step-by-step
  1. Write each part in its place: 6 hundred thousands, 4 ten thousands, 3 thousands, 0 hundreds, 2 tens, 5 ones.
  2. There are no hundreds, so write a 0 in the hundreds place: 643,025.
Fast methodLine up the parts by place and write 0 for any place that is missing.
Quick checkCheck: 643,025 = 600,000 + 40,000 + 3,000 + 20 + 5 ✓.
Why the other choices are wrong
  • B (643,250): wrote the 20 as 200 and the 5 as 50, moving the tens and ones one place to the left
  • C (64,325): wrote the digits 6, 4, 3, 2, 5 side by side and left out the zero for the empty hundreds place
  • D (640,325): wrote 3,000 as 300, putting the 3 in the hundreds place

Ten times the place to the right

Method. A digit in one place is worth 10 times the same digit in the place to its right.

Worked example. In the number 336,914, how does the value of the 3 in the hundred thousands place compare with the value of the 3 in the ten thousands place?

  • (A) It is 100 times as great.
  • (B) The values are equal because the digits are the same.
  • (C) It is 10 times as great.
  • (D) It is 10 more.
AnswerC — It is 10 times as great.
Step-by-step
  1. The 3 in the hundred thousands place has value 300,000.
  2. The 3 in the ten thousands place has value 30,000.
  3. 300,000 ÷ 30,000 = 10, so the first 3 is worth 10 times as much.
Fast methodOne place to the left means 10 times the value.
Quick checkCheck: 10 × 30,000 = 300,000 ✓.
Why the other choices are wrong
  • A (It is 100 times as great.): used 100 times, which is the change across two places, not one place
  • B (The values are equal because the digits are the same.): looked at the digit 3 and not at the place it is in
  • D (It is 10 more.): thought of an additive change; 300,000 is 270,000 more than 30,000, not 10 more

Greatest number with a given rounding

Method. Numbers that round to a value lie from the halfway point below it up to one less than the halfway point above it.

Worked example. What is the greatest whole number that rounds to 70,000 when it is rounded to the nearest thousand?

  • (A) 70,999
  • (B) 70,499
  • (C) 69,500
  • (D) 70,500
AnswerB — 70,499
Step-by-step
  1. Round to the nearest thousand by looking at the hundreds digit.
  2. A number rounds down to 70,000 only when it is less than 70,500.
  3. The greatest whole number less than 70,500 is 70,499.
Fast methodFind the halfway point (70,500); the answer is one less than it.
Quick checkCheck: 70,499 → hundreds digit 4 rounds down to 70,000 ✓; 70,500 → 71,000.
Why the other choices are wrong
  • A (70,999): thought every number from 70,000 to 70,999 rounds to 70,000
  • C (69,500): found the least number that rounds to 70,000, not the greatest
  • D (70,500): forgot that a hundreds digit of 5 rounds up, so 70,500 rounds to 71,000

Adding, Subtracting, Multiplying, Dividing and Estimating

You add and subtract whole numbers with sums and subtracted amounts up to 1,000,000, regrouping when needed, including across zeros. You multiply a number with up to four digits by a one-digit number, and you multiply two 2-digit numbers by splitting one factor into tens and ones (partial products). You divide numbers up to four digits by a one-digit divisor, writing the answer as a whole-number quotient and a remainder; the remainder must be less than the divisor, and a place that cannot be divided gets a 0 in the quotient. You estimate sums, differences and products by rounding first (for products, a 2-digit number times a 1-digit number). Traps: forgetting the zero in the second partial product, dropping a 0 in a quotient, and a remainder bigger than the divisor.

Key formulas
Subtraction checka−b=c  ⟺  c+b=aa-b=c\iff c+b=a
Partial products23×14=23×10+23×4=230+92=32223\times14=23\times10+23\times4=230+92=322
Division with a remainderdividend=divisor×quotient+remainder,remainder<divisor\text{dividend}=\text{divisor}\times\text{quotient}+\text{remainder},\quad \text{remainder}<\text{divisor}
Estimating a product6×73≈6×70=4206\times73\approx6\times70=420
Estimating a sum41,870+12,309≈42,000+12,000=54,00041{,}870+12{,}309\approx42{,}000+12{,}000=54{,}000

Subtracting across a zero

Method. Subtract place by place from the ones, regrouping from the next place (across zeros) when the top digit is smaller.

Worked example. What is 4,026 − 1,358?

  • (A) 3,332
  • (B) 2,768
  • (C) 5,384
  • (D) 2,668
AnswerD — 2,668
Step-by-step
  1. Ones: 6 is less than 8, so regroup. The tens has 2 tens; take 1 ten: 16 − 8 = 8.
  2. Tens: 1 ten is less than 5 tens. The hundreds is 0, so regroup a thousand into 10 hundreds, then a hundred into 10 tens: 11 − 5 = 6.
  3. Hundreds: 9 − 3 = 6. Thousands: 3 − 1 = 2. The difference is 2,668.
Fast methodRegroup across the zero in one step: 402 tens becomes 401 tens and 16 ones.
Quick checkCheck: 2,668 + 1,358 = 4,026 ✓.
Why the other choices are wrong
  • A (3,332): subtracted the smaller digit from the larger digit in each place instead of regrouping
  • B (2,768): regrouped across the zero but did not take 1 from the hundreds after lending to the tens
  • C (5,384): added the numbers instead of subtracting

Multiplying two 2-digit numbers

Method. Split one factor into tens and ones, multiply each part, and add the partial products.

Worked example. What is 47 × 36?

  • (A) 423
  • (B) 1,692
  • (C) 1,242
  • (D) 1,652
AnswerB — 1,692
Step-by-step
  1. Break 36 into 30 + 6.
  2. 47 × 6 = 282 and 47 × 30 = 1,410.
  3. Add the partial products: 282 + 1,410 = 1,692.
Fast methodMultiply by the ones, then by the tens (with a zero), then add.
Quick checkCheck with an estimate: 50 × 36 = 1,800, and 1,692 is close ✓.
Why the other choices are wrong
  • A (423): forgot the zero when multiplying by the 3 tens, so added 282 and 141
  • C (1,242): multiplied only tens by tens and ones by ones: 40 × 30 + 7 × 6
  • D (1,652): forgot to add the regrouped 4 tens when finding 47 × 6, writing 242 instead of 282

Dividing with a zero in the quotient

Method. Divide place by place; write 0 in the quotient when the divisor does not fit, and make sure the remainder is less than the divisor.

Worked example. What is 4,250 ÷ 7?

  • (A) 607 R1
  • (B) 67 R1
  • (C) 606 R8
  • (D) 600 R50
AnswerA — 607 R1
Step-by-step
  1. 7 does not go into 4 thousands, so divide 42 hundreds: 42 ÷ 7 = 6 hundreds, with 0 left.
  2. Bring down 5 tens: 7 does not go into 5, so write 0 in the tens place.
  3. Bring down the 0 ones to make 50 ones: 50 ÷ 7 = 7 with 1 left. The answer is 607 R1.
Fast methodWhen a place cannot be divided, write 0 in the quotient for that place.
Quick checkCheck: 7 × 607 + 1 = 4,249 + 1 = 4,250 ✓.
Why the other choices are wrong
  • B (67 R1): left out the 0 in the tens place of the quotient when 7 did not go into 5 tens
  • C (606 R8): stopped one group early; the remainder 8 is greater than the divisor 7
  • D (600 R50): divided only the hundreds and left 50 as the remainder

Comparison, Multi-Step Problems and Missing Symbols

A multiplication equation can be read as a comparison: 20 = 4 × 5 means 20 is 4 times as many as 5. Use multiplication or division for "times as many" and subtraction for "how many more" or "how many fewer." Multi-step word problems use all four operations with whole numbers; you may write an equation with a letter for the unknown, and you multiply or divide before you add or subtract. When a division has a remainder, decide what it means: drop it (only full groups count), add one more group (everyone needs a seat), or use the remainder itself. Missing-symbol questions ask which of +, −, ×, ÷, =, < or > makes a number sentence true; find the value of each side first.

Key formulas
Multiplicative comparisona=n×b  means  a is n times as many as ba=n\times b\ \ \text{means}\ \ a\ \text{is}\ n\ \text{times as many as}\ b
Finding the smaller amountb=a÷nb=a\div n
Additive comparisonhow many more=larger−smaller\text{how many more}=\text{larger}-\text{smaller}
Order of operations (no grouping symbols)20−2×5=20−10=1020-2\times5=20-10=10
Interpreting a remainder23÷5=4 R3 ⇒ 4 full groups, or 5 groups to fit all23\div5=4\ \text{R}3\ \Rightarrow\ 4\ \text{full groups, or}\ 5\ \text{groups to fit all}

Reading a multiplication as a comparison

Method. In a multiplication equation, the product is that many times as many as either factor.

Worked example. Which statement matches the equation 48 = 6 × 8?

  • (A) 48 is 6 more than 8.
  • (B) 8 is 6 times as many as 48.
  • (C) 48 is 6 times as many as 8.
  • (D) 6 is 8 times as many as 48.
AnswerC — 48 is 6 times as many as 8.
Step-by-step
  1. In a = n × b, a is n times as many as b.
  2. Here 48 = 6 × 8, so 48 is 6 times as many as 8 (and also 8 times as many as 6).
Fast methodThe product is the 'times as many' amount.
Quick checkCheck: 6 groups of 8 is 48 ✓.
Why the other choices are wrong
  • A (48 is 6 more than 8.): read the comparison as addition; 8 + 6 = 14, not 48
  • B (8 is 6 times as many as 48.): switched the larger and smaller numbers
  • D (6 is 8 times as many as 48.): compared the factor 6 with the product instead of the product with a factor

Additive vs multiplicative comparison

Method. Use multiplication for 'times as many' and subtraction for 'how many more'.

Worked example. A toy whale costs $9. A large model whale costs 4 times as much as the toy whale. How much more does the large model cost than the toy whale?

  • (A) $36
  • (B) $13
  • (C) $5
  • (D) $27
AnswerD — $27
Step-by-step
  1. 4 times as much: 4 × $9 = $36.
  2. How much more: $36 − $9 = $27.
Fast method'Times as much' means multiply; 'how much more' means subtract.
Quick checkCheck: $9 + $27 = $36 = 4 × $9 ✓.
Why the other choices are wrong
  • A ($36): found the cost of the large model but not how much more it costs
  • B ($13): added 4 to $9 instead of multiplying
  • C ($5): subtracted 4 from $9

Interpreting a remainder

Method. Decide what the remainder means in the story: drop it, round up, or use it as the answer.

Worked example. A Scout troop of 53 scouts and 4 adult leaders is going to Hawk Mountain Sanctuary. Each van holds 8 people. What is the least number of vans needed so that everyone has a seat?

  • (A) 8
  • (B) 7
  • (C) 6
  • (D) 57
AnswerA — 8
Step-by-step
  1. People in all: 53 + 4 = 57.
  2. 57 ÷ 8 = 7 R1, so 7 vans are full and 1 person is left.
  3. That person needs another van: 7 + 1 = 8 vans.
Fast methodWhen every item must fit, a remainder means one more group.
Quick checkCheck: 8 vans hold 64 ≥ 57, and 7 vans hold only 56 < 57 ✓.
Why the other choices are wrong
  • B (7): dropped the remainder; 7 vans hold only 56 people
  • C (6): left out the 4 leaders and then dropped the remainder: 53 ÷ 8 = 6 R5
  • D (57): found the number of people but did not divide by 8

Factors, Multiples, Primes, Patterns and Function Tables

For whole numbers from 1 through 100 you find all factor pairs, recognize that a number is a multiple of each of its factors, and decide whether a number is prime (exactly two factors, 1 and itself) or composite (more than two factors). The number 1 is neither prime nor composite. You build number patterns from a rule and notice features the rule does not state, such as whether the numbers are odd or even or which ones digits repeat. In a function table the rule uses +, − or × (with whole numbers or money); test a rule on every pair, and to find a missing input, undo the rule. Traps: checking a rule on only one pair, mixing up factors and multiples, and counting numbers instead of jumps in a pattern.

Key formulas
Factor paira×b=n ⇒ a and b are factors of n; n is a multiple of eacha\times b=n\ \Rightarrow\ a\ \text{and}\ b\ \text{are factors of}\ n;\ n\ \text{is a multiple of each}
Prime and compositeprime: factors 1 and itself only;1 is neither\text{prime: factors } 1 \text{ and itself only};\quad 1\ \text{is neither}
Pattern with an add rulenth number=start+(n−1)×jumpn\text{th number}=\text{start}+(n-1)\times\text{jump}
Function table ruleoutput=input+k,  input−k,  or  input×k\text{output}=\text{input}+k,\ \ \text{input}-k,\ \ \text{or}\ \ \text{input}\times k
Undoing a ruleoutput=input+k ⇒ input=output−k\text{output}=\text{input}+k\ \Rightarrow\ \text{input}=\text{output}-k

Identifying a prime number

Method. To test a number up to 100, try dividing by 2, 3, 5 and 7; if none divides evenly, it is prime.

Worked example. Which number is prime?

  • (A) 49
  • (B) 47
  • (C) 57
  • (D) 87
AnswerB — 47
Step-by-step
  1. A prime number has exactly two factors: 1 and itself.
  2. 49 = 7 × 7, 57 = 3 × 19 and 87 = 3 × 29 are composite.
  3. 47 is not divisible by 2, 3, 5 or 7, so its only factors are 1 and 47.
Fast methodTest small primes 2, 3, 5 and 7 for numbers up to 100.
Quick checkCheck: 47 ÷ 3 = 15 R2, 47 ÷ 7 = 6 R5 ✓ (no new factors).
Why the other choices are wrong
  • A (49): did not check 7 × 7 = 49, so 49 has a factor other than 1 and itself
  • C (57): did not check 3 × 19 = 57
  • D (87): thought an odd number ending in 7 must be prime, but 87 = 3 × 29

Finding the rule of a function table

Method. Guess a rule from one pair, then test it on every pair.

Worked example. A function table has these input and output pairs: input 2, output 12; input 4, output 24; input 7, output 42; input 9, output 54. What is the rule?

  • (A) Add 10
  • (B) Add 20
  • (C) Add 6
  • (D) Multiply by 6
AnswerD — Multiply by 6
Step-by-step
  1. Try the rule on every pair, not just one.
  2. 2 × 6 = 12, 4 × 6 = 24, 7 × 6 = 42, 9 × 6 = 54.
  3. Every pair works, so the rule is multiply by 6.
Fast methodA rule must work for every pair in the table.
Quick checkCheck: an 'add' rule would make the outputs go up by the same amount as the inputs; here they do not ✓.
Why the other choices are wrong
  • A (Add 10): checked only the first pair: 2 + 10 = 12, but 4 + 10 = 14
  • B (Add 20): checked only the second pair: 4 + 20 = 24, but 2 + 20 = 22
  • C (Add 6): used the 6 as an addend: 2 + 6 = 8, not 12

Features of a number pattern

Method. Count jumps, not numbers: the nth number is the start plus (n − 1) jumps.

Worked example. A pattern starts at 7 and follows the rule "add 6." Which statement about the pattern is true?

  • (A) The 10th number is 67.
  • (B) Every number in the pattern is even.
  • (C) The 10th number is 61.
  • (D) Every number in the pattern is a multiple of 6.
AnswerC — The 10th number is 61.
Step-by-step
  1. The numbers are 7, 13, 19, 25, …
  2. From the 1st to the 10th number there are 9 jumps of 6: 9 × 6 = 54.
  3. 7 + 54 = 61. The numbers are all odd and none is a multiple of 6.
Fast methodnth number = start + (n − 1) × jump.
Quick checkCheck: 7, 13, 19, 25, 31, 37, 43, 49, 55, 61 — the 10th is 61 ✓.
Why the other choices are wrong
  • A (The 10th number is 67.): added 6 ten times, but the 1st number is 7, so there are only 9 jumps to the 10th number
  • B (Every number in the pattern is even.): thought adding an even number makes the numbers even, but 7 is odd and odd + even is odd
  • D (Every number in the pattern is a multiple of 6.): thought adding 6 gives multiples of 6, but the pattern starts at 7

02.02 Fractions, Geometry, Measurement and Data (Grade 4)

This topic covers the grade 4 PSSA eligible content for fractions (equivalence, comparing, adding and subtracting with like denominators, mixed numbers, multiplying a fraction by a whole number, tenths, hundredths and decimals), geometry (lines, angles, classifying shapes, symmetry) and measurement and data (conversions, word problems, area and perimeter, time, line plots, graphs and angle measurement), about 55% of the test. The real PSSA Mathematics test is online in two untimed sections of about 70 to 80 minutes each, with 52 questions; 40 multiple-choice or technology-enhanced questions (1 point each) and 3 open-ended questions (4 points each) count, and every multiple-choice question has four choices. Questions 1 to 4 of Section 1 are non-calculator, and a calculator is allowed for the rest of the test. A grade 4 formula sheet gives the customary, metric and time conversions and the rectangle formulas A = l × w and P = l + l + w + w.

Equivalent Fractions, Comparing, and Adding and Subtracting Fractions

Equivalent fractions name the same amount: multiply (or divide) the numerator and the denominator by the same number. To compare fractions with different numerators and different denominators, rename them with a common denominator, or compare each one with a benchmark such as 1/2 or 1. On the PSSA the denominators for comparing are 2, 3, 4, 5, 6, 8, 10, 12 and 100. Add or subtract fractions only when the denominators are the same: add or subtract the numerators and keep the denominator. Answers do not need to be simplified, and a final answer is never an improper fraction. For mixed numbers with a common denominator, work with the whole numbers and the fractions separately; on this test a mixed-number subtraction never needs regrouping. Common traps: adding the denominators, comparing only the numerators or only the denominators, and multiplying only one part of a fraction to make an equivalent fraction.

Key formulas
Equivalent fractionsab=n×an×b\frac{a}{b}=\frac{n\times a}{n\times b}
Same denominator: compare numeratorsad<cd  when  a<c\frac{a}{d}<\frac{c}{d}\ \text{ when }\ a<c
Same numerator: fewer, bigger piecesam>an  when  m<n\frac{a}{m}>\frac{a}{n}\ \text{ when }\ m<n
Adding with a common denominatorad+cd=a+cd\frac{a}{d}+\frac{c}{d}=\frac{a+c}{d}
Subtracting with a common denominatorad−cd=a−cd\frac{a}{d}-\frac{c}{d}=\frac{a-c}{d}
One whole1=dd1=\frac{d}{d}

Finding an equivalent fraction

Method. Multiply the numerator and denominator by the same whole number.

Worked example. Which fraction is equivalent to 2/5?

  • (A) 2/10
  • (B) 4/10
  • (C) 4/5
  • (D) 7/10
AnswerB — 4/10
Step-by-step
  1. Multiply the numerator and the denominator by the same number, 2.
  2. 2 × 2 = 4 and 5 × 2 = 10, so 2/5 = 4/10.
Fast methodWhatever you do to the bottom, do to the top.
Quick checkCheck: 2 of 5 equal parts is the same amount as 4 of 10 equal parts, because each fifth is cut into 2 tenths ✓.
Why the other choices are wrong
  • A (2/10): multiplied only the denominator by 2
  • C (4/5): multiplied only the numerator by 2
  • D (7/10): added 5 to both the numerator and the denominator

Comparing fractions with unlike denominators

Method. Rename with a common denominator, then compare the numerators.

Worked example. Mia ran 5/8 mile. Theo ran 2/3 mile. Which statement is true?

  • (A) Mia ran farther, because 5 is greater than 2.
  • (B) Mia ran farther, because 8 is greater than 3.
  • (C) Theo ran farther, because 2/3 = 16/24 and 5/8 = 15/24.
  • (D) Theo ran farther, because 3 is less than 8.
AnswerC — Theo ran farther, because 2/3 = 16/24 and 5/8 = 15/24.
Step-by-step
  1. Use the common denominator 24.
  2. 5/8 = (5 × 3)/(8 × 3) = 15/24 and 2/3 = (2 × 8)/(3 × 8) = 16/24.
  3. 16/24 > 15/24, so 2/3 > 5/8 and Theo ran farther.
Fast methodRename both fractions with the same denominator, then compare numerators.
Quick checkCheck: 5/8 is 3/8 away from 1 and 2/3 is 1/3 away from 1; 1/3 = 8/24 is less than 3/8 = 9/24, so 2/3 is closer to 1 ✓.
Why the other choices are wrong
  • A (Mia ran farther, because 5 is greater than 2.): compared only the numerators
  • B (Mia ran farther, because 8 is greater than 3.): compared only the denominators, thinking a bigger denominator means a bigger fraction
  • D (Theo ran farther, because 3 is less than 8.): used the same-numerator rule even though the numerators are different

Two-step mixed-number subtraction

Method. Combine the parts used, then subtract wholes from wholes and fractions from fractions.

Worked example. Ana has 5 7/8 cups of flour. She uses 2 3/8 cups to make bread and 1 2/8 cups to make muffins. How much flour does she have left?

  • (A) 2 2/8 cups
  • (B) 3 5/8 cups
  • (C) 4 5/8 cups
  • (D) 3 4/8 cups
AnswerA — 2 2/8 cups
Step-by-step
  1. Flour used: 2 3/8 + 1 2/8 = 3 5/8 cups (wholes 2 + 1 = 3, eighths 3 + 2 = 5).
  2. Flour left: 5 7/8 − 3 5/8 = 2 2/8 cups (wholes 5 − 3 = 2, eighths 7 − 5 = 2).
Fast methodAdd what she used, then subtract from what she had.
Quick checkCheck: 2 2/8 + 3 5/8 = 5 7/8 ✓.
Why the other choices are wrong
  • B (3 5/8 cups): found the total flour used but did not subtract it from 5 7/8
  • C (4 5/8 cups): subtracted only the flour for the muffins
  • D (3 4/8 cups): subtracted only the flour for the bread

Multiplying a Fraction by a Whole Number; Tenths, Hundredths and Decimals

A fraction a/b is a copies of the unit fraction 1/b. To multiply a whole number by a fraction, multiply the whole number by the numerator and keep the denominator; the answer does not have to be simplified or written as a mixed number. Do not multiply the denominator. Tenths and hundredths connect fractions to decimals: one tenth is ten hundredths, so a fraction with denominator 10 can be renamed with denominator 100 before adding it to hundredths. In a decimal, the first digit after the point is tenths and the second is hundredths. To compare decimals, line up the place values; more digits does not mean a greater number, and a zero at the end does not change the value. Common traps: adding a tenths numerator straight to a hundredths numerator, and reading hundredths as tenths.

Key formulas
Whole number times a fractionn×ab=n×abn\times\frac{a}{b}=\frac{n\times a}{b}
A fraction as copies of a unit fractionab=a×1b\frac{a}{b}=a\times\frac{1}{b}
Tenths as hundredthsa10=10×a100\frac{a}{10}=\frac{10\times a}{100}
Adding tenths and hundredthsa10+c100=10×a+c100\frac{a}{10}+\frac{c}{100}=\frac{10\times a+c}{100}
Decimal place values110=0.1,1100=0.01\frac{1}{10}=0.1,\qquad \frac{1}{100}=0.01

Writing hundredths as a decimal

Method. The second place after the decimal point is hundredths.

Worked example. Which decimal is equal to 7/100?

  • (A) 0.7
  • (B) 7
  • (C) 0.007
  • (D) 0.07
AnswerD — 0.07
Step-by-step
  1. The denominator 100 means hundredths.
  2. 7 hundredths has 0 in the tenths place and 7 in the hundredths place: 0.07.
Fast methodHundredths need two digits after the decimal point.
Quick checkCheck: 0.07 is read "seven hundredths" ✓.
Why the other choices are wrong
  • A (0.7): wrote 7 tenths instead of 7 hundredths
  • B (7): ignored the denominator and wrote the numerator
  • C (0.007): put one zero too many after the decimal point

Whole number times a non-unit fraction

Method. n × a/b = (n × a)/b; the denominator stays the same.

Worked example. Leo walks 3/4 mile each day for 5 days. How far does he walk in all?

  • (A) 15/20 mile
  • (B) 8/4 miles
  • (C) 15/4 miles
  • (D) 3/20 mile
AnswerC — 15/4 miles
Step-by-step
  1. Each day is 3/4 mile, so 5 days is 5 × 3/4.
  2. 5 × 3/4 = (5 × 3)/4 = 15/4 miles, which is the same as 3 3/4 miles.
Fast methodMultiply the whole number by the numerator only.
Quick checkCheck: 3/4 + 3/4 + 3/4 + 3/4 + 3/4 = 15/4 ✓.
Why the other choices are wrong
  • A (15/20 mile): multiplied the denominator by 5 too
  • B (8/4 miles): added 5 to the numerator instead of multiplying
  • D (3/20 mile): multiplied only the denominator by 5

Comparing two products of a fraction

Method. Find each total with n × a/b, then subtract with the common denominator.

Worked example. Each lap around a park path is 3/8 mile. Ria runs 5 laps and Ken runs 7 laps. How much farther does Ken run than Ria?

  • (A) 6/8 mile
  • (B) 21/8 miles
  • (C) 36/8 miles
  • (D) 6/16 mile
AnswerA — 6/8 mile
Step-by-step
  1. Ken: 7 × 3/8 = 21/8 miles. Ria: 5 × 3/8 = 15/8 miles.
  2. Difference: 21/8 − 15/8 = 6/8 mile.
  3. Or: Ken runs 7 − 5 = 2 more laps, and 2 × 3/8 = 6/8 mile.
Fast methodKen runs 2 more laps, so multiply 2 by 3/8.
Quick checkCheck: 15/8 + 6/8 = 21/8 ✓.
Why the other choices are wrong
  • B (21/8 miles): found how far Ken ran but did not subtract Ria's distance
  • C (36/8 miles): added the two distances instead of subtracting
  • D (6/16 mile): multiplied the denominator by 2 as well as the numerator

Lines, Angles, Shapes, Symmetry and Measuring Angles

Know the figures: a line goes on forever in both directions, a ray has one endpoint, a segment has two endpoints, and an angle is two rays with a common endpoint (the vertex). Parallel lines never meet; perpendicular lines meet at right angles. A right angle is 90°, an acute angle is less than 90°, an obtuse angle is between 90° and 180°, and a straight angle is 180°. Classify shapes by their parallel or perpendicular sides and their angles; a right triangle has one right angle. A line of symmetry folds a figure into two matching halves; on this test a figure has at most two lines of symmetry to find. When you read a protractor, use one scale and subtract the two readings if neither ray is on 0. Angles that are adjacent and do not overlap add up to the whole angle, so a missing part is found by subtracting. Common traps: reading the wrong protractor scale, mixing up acute and obtuse, and thinking every diagonal is a line of symmetry.

Key formulas
Angle typesright=90∘,straight=180∘\text{right}=90^\circ,\qquad \text{straight}=180^\circ
Acute and obtuseacute<90∘<obtuse<180∘\text{acute}<90^\circ<\text{obtuse}<180^\circ
Adjacent angles addm∠ABC=m∠ABD+m∠DBCm\angle ABC=m\angle ABD+m\angle DBC
Reading a protractorangle=larger reading−smaller reading\text{angle}=\text{larger reading}-\text{smaller reading}
Parallel and perpendicularAB↔∥CD↔,AB↔⊥EF↔\overleftrightarrow{AB}\parallel\overleftrightarrow{CD},\qquad \overleftrightarrow{AB}\perp\overleftrightarrow{EF}

Classifying a quadrilateral

Method. Match the shape to every property given, not just one.

Worked example. A quadrilateral has two pairs of parallel sides and four right angles. Its sides are not all the same length. What is the best name for this shape?

  • (A) square
  • (B) rhombus
  • (C) trapezoid
  • (D) rectangle
AnswerD — rectangle
Step-by-step
  1. Two pairs of parallel sides and four right angles describe a rectangle.
  2. A square also needs four equal sides, so this rectangle is not a square.
Fast methodCheck each property: parallel sides, right angles, equal sides.
Quick checkCheck: a rectangle has 4 right angles and 2 pairs of parallel sides ✓.
Why the other choices are wrong
  • A (square): did not use the fact that the sides are not all the same length
  • B (rhombus): matched the two pairs of parallel sides but ignored the right angles and the side lengths
  • C (trapezoid): thought one pair of parallel sides is enough, but this shape has two pairs

Finding an unknown adjacent angle

Method. For adjacent, non-overlapping angles: part + part = whole.

Worked example. Angle PQR measures 125°. Ray QS is inside angle PQR, so angles PQS and SQR are adjacent and do not overlap. Angle PQS measures 48°. What is the measure of angle SQR?

  • (A) 173°
  • (B) 77°
  • (C) 132°
  • (D) 42°
AnswerB — 77°
Step-by-step
  1. The two parts add to the whole: 48° + m∠SQR = 125°.
  2. m∠SQR = 125° − 48° = 77°.
Fast methodWhole angle minus the known part.
Quick checkCheck: 48° + 77° = 125° ✓.
Why the other choices are wrong
  • A (173°): added the two angle measures instead of subtracting
  • C (132°): subtracted 48° from 180° as if angle PQR were a straight angle
  • D (42°): subtracted 48° from 90° as if angle PQR were a right angle

Three adjacent angles on a straight angle

Method. A straight angle is 180°; subtract every known adjacent part.

Worked example. Angle ABC is a straight angle. Rays BD and BE are inside it and split it into three adjacent, non-overlapping angles: ABD, DBE and EBC. Angle ABD measures 48°, and angle DBE is twice as large as angle ABD. What is the measure of angle EBC?

  • (A) 36°
  • (B) 84°
  • (C) 132°
  • (D) 216°
AnswerA — 36°
Step-by-step
  1. A straight angle measures 180°.
  2. m∠DBE = 2 × 48° = 96°.
  3. m∠EBC = 180° − 48° − 96° = 36°.
Fast methodFind the doubled angle first, then take both known angles away from 180°.
Quick checkCheck: 48° + 96° + 36° = 180° ✓.
Why the other choices are wrong
  • B (84°): found angle DBE but forgot to subtract angle ABD
  • C (132°): subtracted only angle ABD from 180°
  • D (216°): used 360° for a straight angle

Measurement Conversions, Area and Perimeter, Time and Data

The grade 4 formula sheet gives the conversion table and the rectangle formulas A = l × w and P = l + l + w + w. To change a larger unit to a smaller unit, multiply by the number of small units in one large unit; for two steps (yards to inches, gallons to cups) convert one step at a time. Word problems use distance, time, liquid volume, mass and money, including money with cents. For a rectangle with a missing side, use the area or the perimeter to work backward; all side lengths are whole numbers. Times can be named as minutes after or before the hour. Elapsed time is easiest in jumps: to the next hour, then whole hours, then the extra minutes. Line plots on the PSSA use halves, fourths or eighths labeled with a common denominator; each X is one data value. Pictographs have a key, and a half symbol is half of the key value. Common traps: dividing instead of multiplying when converting, counting symbols instead of using the key, and treating 60 minutes like 100.

Key formulas
Rectangle area (formula sheet)A=l×wA=l\times w
Rectangle perimeter (formula sheet)P=l+l+w+wP=l+l+w+w
Customary length and weight1 yd=3 ft,1 ft=12 in.,1 lb=16 oz.1\text{ yd}=3\text{ ft},\quad 1\text{ ft}=12\text{ in.},\quad 1\text{ lb}=16\text{ oz.}
Liquid volume1 gal=4 qt,1 qt=2 pt,1 pt=2 c1\text{ gal}=4\text{ qt},\quad 1\text{ qt}=2\text{ pt},\quad 1\text{ pt}=2\text{ c}
Metric1 km=1,000 m,1 m=100 cm,1 L=1,000 mL1\text{ km}=1{,}000\text{ m},\quad 1\text{ m}=100\text{ cm},\quad 1\text{ L}=1{,}000\text{ mL}
Time1 hr=60 min,1 day=24 hr,1 wk=7 days1\text{ hr}=60\text{ min},\quad 1\text{ day}=24\text{ hr},\quad 1\text{ wk}=7\text{ days}

Converting pounds to ounces

Method. Number of large units × small units in one large unit.

Worked example. A bag of rice weighs 3 pounds. How many ounces does the bag weigh? (1 lb = 16 oz.)

  • (A) 19 ounces
  • (B) 13 ounces
  • (C) 30 ounces
  • (D) 48 ounces
AnswerD — 48 ounces
Step-by-step
  1. Pounds are larger than ounces, so multiply.
  2. 3 × 16 = 48 ounces.
Fast methodLarger unit to smaller unit: multiply.
Quick checkCheck: 16 + 16 + 16 = 48 ✓.
Why the other choices are wrong
  • A (19 ounces): added 3 and 16 instead of multiplying
  • B (13 ounces): subtracted 3 from 16
  • C (30 ounces): used 10 ounces in a pound

Missing side from the perimeter

Method. Use P = l + l + w + w and work backward.

Worked example. A rectangular garden has a perimeter of 46 feet. Its length is 15 feet. What is the width of the garden?

  • (A) 31 feet
  • (B) 8 feet
  • (C) 16 feet
  • (D) 23 feet
AnswerB — 8 feet
Step-by-step
  1. P = l + l + w + w, so 46 = 15 + 15 + w + w.
  2. 15 + 15 = 30 and 46 − 30 = 16, so the two widths total 16 feet.
  3. w = 16 ÷ 2 = 8 feet.
Fast methodTake away both lengths, then halve.
Quick checkCheck: 15 + 15 + 8 + 8 = 46 ✓.
Why the other choices are wrong
  • A (31 feet): subtracted only one length from the perimeter
  • C (16 feet): subtracted both lengths but did not split what was left between the two widths
  • D (23 feet): found half the perimeter and stopped

Line plot with eighths

Method. Read every X, total each group, then add or subtract with the common denominator.

Worked example. A line plot labeled in eighths of an inch shows the lengths of 8 ribbons: two X's above 1/8, three X's above 3/8, one X above 5/8 and two X's above 7/8. What is the difference between the total length of the longest ribbons and the total length of the shortest ribbons?

  • (A) 6/8 inch
  • (B) 1 6/8 inches
  • (C) 1 4/8 inches
  • (D) 2 inches
AnswerC — 1 4/8 inches
Step-by-step
  1. The longest ribbons are the two at 7/8: 7/8 + 7/8 = 14/8 inches.
  2. The shortest ribbons are the two at 1/8: 1/8 + 1/8 = 2/8 inch.
  3. Difference: 14/8 − 2/8 = 12/8 = 1 4/8 inches.
Fast methodEach X is one ribbon: total each group first, then subtract.
Quick checkCheck: 2/8 + 12/8 = 14/8 ✓.
Why the other choices are wrong
  • A (6/8 inch): subtracted one shortest ribbon from one longest ribbon instead of using the totals
  • B (1 6/8 inches): found the total of the longest ribbons and did not subtract
  • D (2 inches): added the two totals instead of subtracting