Pennsylvania PSSA Mathematics · Math · Grade 5

Grade 5: Study Guide

Grade 5 mathematics on the Pennsylvania System of School Assessment (PSSA), built on PDE's Assessment Anchors and Eligible Content. The real test is taken in two untimed sections (about 70–80 minutes each) with 40 scored multiple-choice questions and 3 open-ended questions scored 0–4, with a calculator on all but the first four questions, and a grade 5 formula sheet. Proficient and Advanced meet the standard. Here open-ended skills appear as multi-step questions with one final answer; the timer is a practice target.

03.01 Base Ten, Algebraic Concepts, and Geometry (Grade 5)

This topic covers the grade 5 eligible content for Numbers and Operations in Base Ten (place value, powers of 10, decimals to thousandths, multi-digit whole-number and decimal operations), Operations and Algebraic Thinking (grouping symbols, writing and reading expressions, two numerical patterns), and Geometry (graphing in the first quadrant and classifying two-dimensional figures). The PSSA Grade 5 Mathematics test is taken online in two untimed sections (about 70 to 80 minutes each) with 52 questions, of which 40 multiple-choice or technology-enhanced questions (1 point each) and 3 open-ended questions (4 points each) count; multiple-choice questions have four answer choices. Questions 1–4 of Section 1 must be done without a calculator, and a calculator is allowed for the rest of the test. A grade 5 formula sheet is provided, with customary, metric, and time conversions and the volume formulas V = l × w × h and V = B × h.

Place Value, Powers of 10, and Decimals to Thousandths

Each place is 10 times the place to its right and 1/10 of the place to its left. A power of 10 such as 10³ means 10 × 10 × 10 = 1,000; the exponent tells how many places the decimal point moves: right when you multiply, left when you divide. Read the decimal point as “and,” and make sure a decimal named in thousandths ends in the third place after the point. To compare or order decimals, write them with the same number of decimal places and compare place by place: a longer decimal is not always greater (0.5 > 0.475). To round to the ones, tenths, hundredths, or thousandths, look only at the digit just to the right of that place.

Key formulas
Place-value relationshipvalue of a place=10×(place to its right)=110×(place to its left)\text{value of a place}=10\times(\text{place to its right})=\tfrac{1}{10}\times(\text{place to its left})
Power of 10104=10×10×10×10=10,00010^{4}=10\times10\times10\times10=10{,}000
Multiplying by a power of 102.9×103=2,9002.9\times10^{3}=2{,}900
Dividing by a power of 1081÷102=0.8181\div10^{2}=0.81
Expanded form8.209=8×1+2×110+0×1100+9×110008.209=8\times1+2\times\tfrac{1}{10}+0\times\tfrac{1}{100}+9\times\tfrac{1}{1000}
Rounding (nearest hundredth)1.248≈1.25(thousandths digit 8≥5, so round up)1.248\approx1.25\quad(\text{thousandths digit }8\ge5\text{, so round up})

Comparing place values (M05.A-T.1.1.1)

Method. Moving one place right divides a digit's value by 10; moving one place left multiplies it by 10.

Worked example. In the number 7.77, how does the value of the 7 in the tenths place compare with the value of the 7 in the ones place?

  • (A) It is 1/10 of the value of the 7 in the ones place.
  • (B) It is 10 times the value of the 7 in the ones place.
  • (C) It is 1/100 of the value of the 7 in the ones place.
  • (D) It is the same as the value of the 7 in the ones place.
AnswerA — It is 1/10 of the value of the 7 in the ones place.
Step-by-step
  1. The 7 in the ones place is worth 7. The 7 in the tenths place is worth 7 tenths, or 0.7.
  2. 0.7 is 7 ÷ 10, so the tenths 7 is 1/10 of the value of the ones 7.
Fast methodEach move one place to the right makes a digit's value 1/10 as large.
Quick checkCheck: 0.7 × 10 = 7 ✓.
Why the other choices are wrong
  • B (It is 10 times the value of the 7 in the ones place.): reversed the relationship: a place is 1/10 of the place to its LEFT, not 10 times it
  • C (It is 1/100 of the value of the 7 in the ones place.): counted two places instead of one (that is the hundredths place)
  • D (It is the same as the value of the 7 in the ones place.): looked at the digit 7 only, not at the place it is in

Multiplying by a power of 10 (M05.A-T.1.1.2)

Method. When you multiply by 10ⁿ, move the decimal point n places to the right; when you divide, move it n places to the left.

Worked example. What is the value of 0.36 × 10³?

  • (A) 36
  • (B) 3,600
  • (C) 360
  • (D) 0.00036
AnswerC — 360
Step-by-step
  1. 10³ = 10 × 10 × 10 = 1,000, so the exponent 3 means move the decimal point 3 places.
  2. Multiplying makes the number larger, so move the point 3 places to the right: 0.36 → 3.6 → 36 → 360.
Fast methodExponent 3 → move the point 3 places right when multiplying.
Quick checkCheck: 360 ÷ 1,000 = 0.36 ✓.
Why the other choices are wrong
  • A (36): multiplied by 10² instead of 10³ (moved the point only 2 places)
  • B (3,600): multiplied by 10⁴ (moved the point 4 places)
  • D (0.00036): divided by 10³ instead of multiplying

Comparing and rounding decimals (M05.A-T.1.1.4, 1.1.5)

Method. Give every decimal the same number of places before comparing, and look only at the digit just right of the rounding place.

Worked example. Three runners finish a race in 9.865 seconds, 9.86 seconds, and 9.9 seconds. Which statement is true?

  • (A) The time 9.865 seconds is the least of the three times.
  • (B) When each time is rounded to the nearest tenth, all three times are 9.9 seconds.
  • (C) The time 9.9 seconds is the least because it has the fewest digits.
  • (D) When 9.865 is rounded to the nearest hundredth, the result is 9.86.
AnswerB — When each time is rounded to the nearest tenth, all three times are 9.9 seconds.
Step-by-step
  1. Compare: write 9.865, 9.860, 9.900. The least is 9.860, so the statements that 9.865 is the least and that 9.9 is the least are both false.
  2. Round 9.865 to the nearest hundredth: the thousandths digit is 5, so round up to 9.87, not 9.86.
  3. Round each to the nearest tenth: 9.865 → 9.9 (hundredths digit 6), 9.86 → 9.9 (hundredths digit 6), 9.9 stays 9.9. The statement about 9.9 is true.
Fast methodWrite all three numbers with three decimal places, then test each statement.
Quick checkCheck: 9.86 < 9.865 < 9.9 ✓.
Why the other choices are wrong
  • A (The time 9.865 seconds is the least of the three times.): thought the number with more digits is smaller; 9.86 = 9.860 is less than 9.865
  • C (The time 9.9 seconds is the least because it has the fewest digits.): compared by the number of digits instead of by place value
  • D (When 9.865 is rounded to the nearest hundredth, the result is 9.86.): dropped the 5 in the thousandths place instead of rounding up

Multi-Digit Whole Numbers and Decimal Operations

Grade 5 multiplication goes up to a three-digit number times a three-digit number; break one factor into hundreds, tens, and ones and add the partial products, remembering that the tens product ends in a 0. Division goes up to four-digit dividends and two-digit divisors: estimate first, divide place by place, and check by multiplying. With decimals to hundredths, line up the decimal points to add or subtract (write a whole number such as 7 as 7.00 when needed and regroup carefully). To multiply, multiply as whole numbers and count the decimal places in both factors. On the PSSA, decimals are divided only by whole numbers, never by a decimal.

Key formulas
Partial products213×32=213×30+213×2=6,390+426=6,816213\times32=213\times30+213\times2=6{,}390+426=6{,}816
Checking a quotient1,196÷26=46  because  26×46=1,1961{,}196\div26=46\ \text{ because }\ 26\times46=1{,}196
Adding decimals (line up the points)5.40+1.07=6.475.40+1.07=6.47
Multiplying decimals0.3×0.7=0.21(1+1=2 decimal places)0.3\times0.7=0.21\quad(1+1=2\text{ decimal places})
Dividing a decimal by a whole number3.48÷4=0.873.48\div4=0.87

Multiplying a decimal by a whole number (M05.A-T.2.1.3)

Method. Multiply as whole numbers, then give the product as many decimal places as the factors have in total.

Worked example. A family buys 5 museum tickets for $7.25 each. What is the total cost?

  • (A) $362.50
  • (B) $35.25
  • (C) $12.25
  • (D) $36.25
AnswerD — $36.25
Step-by-step
  1. Multiply as whole numbers: 5 × 725 = 3,625.
  2. 7.25 has 2 decimal places, so the product has 2 decimal places: 36.25. The cost is $36.25.
Fast method5 × $7 = $35 and 5 × $0.25 = $1.25; $35 + $1.25 = $36.25.
Quick checkCheck: estimate 5 × $7 = $35, close to $36.25 ✓.
Why the other choices are wrong
  • A ($362.50): gave the product only 1 decimal place (5 × 725 = 3,625 → 362.5) instead of 2
  • B ($35.25): multiplied only the dollars (5 × 7 = 35) and kept the 25 cents
  • C ($12.25): added 5 + 7.25 instead of multiplying

Dividing by a two-digit divisor (M05.A-T.2.1.2)

Method. Estimate the quotient, divide place by place, and check by multiplying the quotient by the divisor.

Worked example. What is 2,592 ÷ 48?

  • (A) 504
  • (B) 54
  • (C) 52
  • (D) 2,640
AnswerB — 54
Step-by-step
  1. Estimate: 2,500 ÷ 50 = 50, so the answer is a little more than 50.
  2. 48 × 5 tens = 240 tens. 259 tens − 240 tens = 19 tens; bring down 2 to get 192.
  3. 48 × 4 = 192, remainder 0. The quotient is 54.
Fast methodEstimate first so you know the answer has 2 digits and is near 50.
Quick checkCheck: 48 × 54 = 2,592 ✓.
Why the other choices are wrong
  • A (504): wrote an extra 0 in the quotient
  • C (52): divided by 50 instead of 48 and rounded (2,592 ÷ 50 ≈ 52)
  • D (2,640): added 48 instead of dividing

Multi-step decimal division and subtraction (M05.A-T.2.1.3)

Method. When totals cover different numbers of items, divide to find the cost of one item before comparing.

Worked example. Store A sells 6 bottles of water for $8.70. Store B sells 4 bottles of the same water for $6.20. How much less does one bottle cost at Store A than at Store B?

  • (A) $0.10
  • (B) $2.50
  • (C) $1.45
  • (D) $1.55
AnswerA — $0.10
Step-by-step
  1. One bottle at Store A: $8.70 ÷ 6 = $1.45.
  2. One bottle at Store B: $6.20 ÷ 4 = $1.55.
  3. Difference: $1.55 − $1.45 = $0.10.
Fast methodFind each price for one bottle, then subtract.
Quick checkCheck: 6 × $1.45 = $8.70 and 4 × $1.55 = $6.20 ✓.
Why the other choices are wrong
  • B ($2.50): subtracted the two totals without finding the cost of one bottle
  • C ($1.45): gave the cost of one bottle at Store A, not the difference
  • D ($1.55): gave the cost of one bottle at Store B, not the difference

Grouping Symbols, Expressions, and Numerical Patterns

Grade 5 expressions can use parentheses ( ), brackets [ ], and braces { }, even one inside another. Work from the innermost grouping outward; inside each, multiply and divide from left to right before you add and subtract from left to right. To write an expression from words, put the step that happens first in grouping symbols, such as 2 × (8 + 7) for “add 8 and 7, then multiply by 2.” You can also read an expression without evaluating it: 3 × (a sum) is 3 times as large as the sum. For two patterns that both start at 0, list the terms side by side, pair terms in the same position, and compare them: if one rule adds 4 times as much as the other, every term is 4 times its partner. Watch for the trap of describing the relationship as a difference (“so many more”) when it is really “so many times as large.”

Key formulas
Order for grouping symbolsinnermost grouping first, then outward (usually (  ) inside [  ] inside {  })\text{innermost grouping first, then outward (usually }(\;)\text{ inside }[\;]\text{ inside }\{\;\})
Then the operations×, ÷ left to right; then +, − left to right\times,\ \div\ \text{left to right};\ \text{then}\ +,\ -\ \text{left to right}
Nested example2×[10−(1+3)]=2×6=122\times[10-(1+3)]=2\times6=12
Reading an expression3×(a+b) is 3 times as large as (a+b)3\times(a+b)\ \text{is 3 times as large as}\ (a+b)
Two patterns from 0add 2: 0,2,4,6;add 10: 0,10,20,30;10=5×2\text{add }2:\ 0,2,4,6;\quad\text{add }10:\ 0,10,20,30;\quad 10=5\times2

Writing an expression (M05.B-O.1.1.2)

Method. Put the step that happens first inside parentheses so it is done before the operation outside.

Worked example. Which expression shows “add 8 and 7, then multiply by 2”?

  • (A) 2 × 8 + 7
  • (B) 8 + 7 × 2
  • (C) 2 × (8 + 7)
  • (D) 8 × 7 + 2
AnswerC — 2 × (8 + 7)
Step-by-step
  1. “Add 8 and 7” is the sum 8 + 7. It must be found first, so put it in parentheses: (8 + 7).
  2. “Then multiply by 2” multiplies the whole sum: 2 × (8 + 7).
Fast methodWhatever is done first goes inside the grouping symbols.
Quick checkCheck: 2 × (8 + 7) = 2 × 15 = 30 ✓.
Why the other choices are wrong
  • A (2 × 8 + 7): left out the parentheses, so only the 8 is multiplied by 2
  • B (8 + 7 × 2): left out the parentheses, so only the 7 is multiplied by 2
  • D (8 × 7 + 2): multiplied 8 and 7 instead of adding them

Evaluating with parentheses, brackets, and braces (M05.B-O.1.1.1)

Method. Evaluate the innermost grouping symbols first and work outward; inside each, multiply or divide before you add or subtract.

Worked example. What is the value of 40 − {2 × [5 + (9 − 6)]}?

  • (A) 304
  • (B) 33
  • (C) 27
  • (D) 24
AnswerD — 24
Step-by-step
  1. Innermost first, the parentheses: 9 − 6 = 3.
  2. Brackets: 5 + 3 = 8.
  3. Braces: 2 × 8 = 16.
  4. Last: 40 − 16 = 24.
Fast methodWork from the inside out: ( ) then [ ] then { }.
Quick checkCheck: 16 + 24 = 40 ✓.
Why the other choices are wrong
  • A (304): subtracted 40 − 2 first, then multiplied by 8
  • B (33): ignored all of the grouping symbols and worked 40 − 2 × 5 + 9 − 6
  • C (27): inside the brackets, multiplied 2 × 5 before adding (9 − 6)

Two numerical patterns (M05.B-O.2.1.1, 2.1.2)

Method. List both patterns side by side and compare matching terms to find the relationship.

Worked example. Pattern A starts at 0 and uses the rule “add 4.” Pattern B starts at 0 and uses the rule “add 8.” What is the term in Pattern B that is in the same position as the term 20 in Pattern A? Type your answer as a whole number.

    Answer40 (accepted: 40)
    Step-by-step
    1. Pattern A: 0, 4, 8, 12, 16, 20. The term 20 is the 6th term.
    2. Pattern B: 0, 8, 16, 24, 32, 40. The 6th term is 40.
    3. Notice each term of B is 2 times the matching term of A, and 2 × 20 = 40.
    Fast methodRule B adds twice as much as rule A, so each B term is 2 times its A term.
    Quick checkCheck: 20 ÷ 4 = 5 steps; 5 × 8 = 40 ✓.

    The Coordinate Plane (Quadrant I) and Classifying Figures

    An ordered pair (x, y) tells how to reach a point from the origin (0, 0): move x units right along the x-axis, then y units up. Points on the y-axis have x = 0, and points on the x-axis have y = 0. PSSA grade 5 uses only the first quadrant, where both coordinates are 0 or more. In real-world graphs, say what each coordinate means in the situation. When two points share an x-coordinate (or a y-coordinate), the distance between them is the difference of the other coordinates. Figures belong to categories: every square is a rectangle and a rhombus, every rectangle and rhombus is a parallelogram, and every parallelogram is a quadrilateral. In Pennsylvania a trapezoid has exactly one pair of parallel sides, so a trapezoid is never a parallelogram.

    Key formulas
    Ordered pair(x, y)=(units right, units up)(x,\,y)=(\text{units right},\ \text{units up})
    Distance on a grid linesame y: distance=larger x−smaller x\text{same }y:\ \text{distance}=\text{larger }x-\text{smaller }x
    Quadrilateral hierarchysquare⊂rectangle⊂parallelogram⊂quadrilateral\text{square}\subset\text{rectangle}\subset\text{parallelogram}\subset\text{quadrilateral}
    Rhombus and squaresquare⊂rhombus⊂parallelogram\text{square}\subset\text{rhombus}\subset\text{parallelogram}
    Trapezoid (PA definition)trapezoid: exactly one pair of parallel sides\text{trapezoid: exactly one pair of parallel sides}

    Reading an ordered pair (M05.C-G.1.1.1)

    Method. The first coordinate is the horizontal move from the origin; the second is the vertical move.

    Worked example. How do you get to the point (5, 2) on a coordinate grid?

    • (A) Start at the origin, move 2 units right, then move 5 units up.
    • (B) Start at the origin, move 5 units right, then move 2 units up.
    • (C) Start at the origin, move 5 units right, then move 2 units left.
    • (D) Start at the origin and move 7 units right.
    AnswerB — Start at the origin, move 5 units right, then move 2 units up.
    Step-by-step
    1. In (x, y), x tells how far to move right from the origin along the x-axis.
    2. y tells how far to move up, parallel to the y-axis. So (5, 2) is 5 right, then 2 up.
    Fast methodx comes first: across before up.
    Quick checkCheck: the point is 5 units from the y-axis and 2 units above the x-axis ✓.
    Why the other choices are wrong
    • A (Start at the origin, move 2 units right, then move 5 units up.): switched the coordinates: the first number is the move along the x-axis
    • C (Start at the origin, move 5 units right, then move 2 units left.): read the second number as a move left instead of up
    • D (Start at the origin and move 7 units right.): added the two coordinates

    Classifying quadrilaterals in a hierarchy (M05.C-G.2.1.1)

    Method. Test each name against its definition; a figure takes every name whose properties it has.

    Worked example. A shape has 4 sides of equal length and 2 pairs of parallel sides, but it has no right angles. Which list gives all the names that describe the shape?

    • (A) quadrilateral, parallelogram, rhombus
    • (B) quadrilateral, rhombus, square
    • (C) quadrilateral, trapezoid, rhombus
    • (D) quadrilateral, rectangle, rhombus
    AnswerA — quadrilateral, parallelogram, rhombus
    Step-by-step
    1. It has 4 sides, so it is a quadrilateral. It has 2 pairs of parallel sides, so it is a parallelogram.
    2. All 4 sides are equal, so it is a rhombus.
    3. It has no right angles, so it is not a rectangle or a square. It has 2 pairs of parallel sides, so it is not a trapezoid.
    Fast methodGo down the family tree and stop when a property is missing.
    Quick checkCheck: every rhombus is a parallelogram, and every parallelogram is a quadrilateral ✓.
    Why the other choices are wrong
    • B (quadrilateral, rhombus, square): thought equal sides are enough to make a square; a square also needs right angles
    • C (quadrilateral, trapezoid, rhombus): used the wrong trapezoid definition; in PA a trapezoid has exactly one pair of parallel sides
    • D (quadrilateral, rectangle, rhombus): thought 2 pairs of parallel sides makes a rectangle; a rectangle needs right angles

    Coordinates and classifying (M05.C-G.1.1.2, 2.1.1)

    Method. For sides on grid lines, subtract the coordinates that change to find each length, then classify.

    Worked example. A quadrilateral has vertices at (1, 1), (5, 1), (5, 4), and (1, 4). Its sides follow the grid lines, so all four angles are right angles. Which name best describes the quadrilateral?

    • (A) a square
    • (B) a trapezoid
    • (C) a rectangle that is not a square
    • (D) a rhombus
    AnswerC — a rectangle that is not a square
    Step-by-step
    1. Bottom side from (1, 1) to (5, 1): 5 − 1 = 4 units. Right side from (5, 1) to (5, 4): 4 − 1 = 3 units.
    2. Opposite sides are 4 and 3 units, and all angles are right angles, so it is a rectangle.
    3. The sides are not all equal (4 ≠ 3), so it is not a square.
    Fast methodFind the side lengths from the coordinates, then use the definitions.
    Quick checkCheck: top side from (1, 4) to (5, 4) is also 4 units ✓.
    Why the other choices are wrong
    • A (a square): did not compare side lengths; the sides are 4 units and 3 units
    • B (a trapezoid): thought one pair of parallel sides was enough; this figure has two pairs, so it is not a trapezoid
    • D (a rhombus): thought opposite sides equal means all sides equal

    03.02 Fractions, Measurement, and Data (Grade 5)

    This topic covers the Grade 5 PSSA eligible content for fractions (adding and subtracting with unlike denominators, fractions as division, multiplying fractions and mixed numbers, multiplication as scaling, and dividing with unit fractions) and for measurement and data (converting units within one system, line plots with fractions, data displays, and volume of rectangular prisms). The real Grade 5 PSSA Mathematics test is taken online in two untimed sections (about 70–80 minutes each) with 52 questions, of which 40 multiple-choice or technology-enhanced questions (1 point each) and 3 open-ended questions (4 points each) count; every multiple-choice question has four answer choices. Questions 1–4 of Section 1 are non-calculator, and a calculator is allowed for the rest of the test. A Grade 5 formula sheet gives the customary, metric, and time conversions and the volume formulas V = l × w × h, V = B × h, and V = s × s × s.

    Adding and Subtracting Fractions and Mixed Numbers

    Grade 5 adds and subtracts fractions and mixed numbers with unlike denominators of any kind, including in word problems (M05.A-F.1.1.1). Rename the fractions with a common denominator (the least common multiple of the denominators is easiest), then add or subtract the numerators and keep the denominator. With mixed numbers, regroup one whole when the fraction you subtract is larger, and change an improper fraction part into a whole when you add. Common traps: adding the denominators, changing the denominators without renaming the numerators, and subtracting the smaller fraction from the larger one instead of regrouping. Estimate with benchmarks such as 0, 1/2, and 1 to check that an answer is reasonable.

    Key formulas
    Unlike denominatorsab+cd=a×d+b×cb×d\dfrac{a}{b}+\dfrac{c}{d}=\dfrac{a\times d+b\times c}{b\times d}
    Equivalent fractionsab=a×nb×n(n≠0)\dfrac{a}{b}=\dfrac{a\times n}{b\times n}\quad(n\ne 0)
    Mixed number to fractionw ab=w×b+abw\,\dfrac{a}{b}=\dfrac{w\times b+a}{b}
    Regrouping one wholew ab=(w−1) a+bbw\,\dfrac{a}{b}=(w-1)\,\dfrac{a+b}{b}
    Simplest formab=a÷gb÷g, g=GCF(a,b)\dfrac{a}{b}=\dfrac{a\div g}{b\div g},\ g=\text{GCF}(a,b)

    Adding fractions with unlike denominators

    Method. To add fractions with unlike denominators, rename them with a common denominator, then add the numerators and keep the denominator.

    Worked example. What is 3/4 + 1/6? Write the answer in simplest form.

    • (A) 4/10
    • (B) 4/12
    • (C) 11/12
    • (D) 7/12
    AnswerC — 11/12
    Step-by-step
    1. The least common multiple of 4 and 6 is 12.
    2. 3/4 = 9/12 and 1/6 = 2/12.
    3. 9/12 + 2/12 = 11/12, which is in simplest form.
    Fast methodRename both fractions with denominator 12, then add the numerators.
    Quick checkCheck: 11/12 − 1/6 = 11/12 − 2/12 = 9/12 = 3/4 ✓.
    Why the other choices are wrong
    • A (4/10): added the numerators and added the denominators
    • B (4/12): changed both denominators to 12 but did not rename the numerators (3/12 + 1/12)
    • D (7/12): subtracted instead of adding (9/12 − 2/12)

    Subtracting mixed numbers with regrouping

    Method. When the fraction you subtract is larger, regroup one whole into equal parts before subtracting.

    Worked example. A ribbon is 3 2/5 feet long. Eva cuts off 1 3/4 feet. How many feet of ribbon are left?

    • (A) 1 13/20
    • (B) 2 7/20
    • (C) 2 13/20
    • (D) 5 3/20
    AnswerA — 1 13/20
    Step-by-step
    1. Use the common denominator 20: 3 2/5 = 3 8/20 and 1 3/4 = 1 15/20.
    2. 8/20 is less than 15/20, so regroup: 3 8/20 = 2 28/20.
    3. 2 28/20 − 1 15/20 = 1 13/20 feet.
    Fast methodRename with denominator 20, regroup one whole as 20/20, then subtract wholes and fractions.
    Quick checkCheck: 1 13/20 + 1 3/4 = 1 13/20 + 1 15/20 = 2 28/20 = 3 8/20 = 3 2/5 ✓.
    Why the other choices are wrong
    • B (2 7/20): subtracted the smaller fraction from the larger one (3/4 − 2/5) instead of regrouping
    • C (2 13/20): regrouped 1 whole into twentieths but did not take 1 away from the 3 wholes
    • D (5 3/20): added the two lengths instead of subtracting

    Missing side from a perimeter

    Method. For a missing part, find the total of the known parts, then subtract it from the whole.

    Worked example. The perimeter of a triangle is 8 1/4 inches. Two of its sides are 2 2/3 inches and 3 1/2 inches long. How long is the third side?

    • (A) 6 1/6 inches
    • (B) 14 5/12 inches
    • (C) 5 7/12 inches
    • (D) 2 1/12 inches
    AnswerD — 2 1/12 inches
    Step-by-step
    1. Add the two known sides: 2 2/3 + 3 1/2 = 2 4/6 + 3 3/6 = 5 7/6 = 6 1/6 inches.
    2. Subtract from the perimeter using denominator 12: 8 1/4 − 6 1/6 = 8 3/12 − 6 2/12.
    3. 8 3/12 − 6 2/12 = 2 1/12 inches.
    Fast methodThird side = perimeter − (sum of the other two sides).
    Quick checkCheck: 2 1/12 + 2 8/12 + 3 6/12 = 7 15/12 = 8 3/12 = 8 1/4 ✓.
    Why the other choices are wrong
    • A (6 1/6 inches): found the sum of the two known sides and stopped
    • B (14 5/12 inches): added the perimeter and the two sides
    • C (5 7/12 inches): subtracted only the 2 2/3-inch side from the perimeter

    Fractions as Division, Multiplying Fractions, Scaling, and Dividing Unit Fractions

    A fraction is a division: a/b = a ÷ b, so sharing a wholes equally among b people gives each a/b (M05.A-F.2.1.1). To multiply a fraction or mixed number by a fraction, rename mixed numbers as improper fractions and multiply numerators and denominators (M05.A-F.2.1.2); do not multiply only the whole-number parts and the fraction parts. Multiplication is scaling (M05.A-F.2.1.3): multiplying by a fraction greater than 1 makes a number larger, by a fraction less than 1 makes it smaller, and by 1 leaves it the same. Grade 5 divides only a unit fraction by a whole number or a whole number by a unit fraction (M05.A-F.2.1.4); fraction ÷ fraction is not tested until grade 6.

    Key formulas
    Fraction as divisionab=a÷b\dfrac{a}{b}=a\div b
    Multiplying fractionsab×cd=a×cb×d\dfrac{a}{b}\times\dfrac{c}{d}=\dfrac{a\times c}{b\times d}
    Scalingn×f>n if f>1;n×f<n if f<1(n>0)n\times f>n\ \text{if}\ f>1;\quad n\times f<n\ \text{if}\ f<1\quad(n>0)
    Unit fraction ÷ whole number1b÷n=1b×n\dfrac{1}{b}\div n=\dfrac{1}{b\times n}
    Whole number ÷ unit fractionn÷1b=n×bn\div\dfrac{1}{b}=n\times b

    Fraction as division

    Method. a ÷ b = a/b: the fraction bar means divide.

    Worked example. Six runners share 4 liters of water equally. How many liters of water does each runner get?

    • (A) 3/2
    • (B) 2/3
    • (C) 1/6
    • (D) 24
    AnswerB — 2/3
    Step-by-step
    1. Sharing 4 liters equally among 6 runners means 4 ÷ 6.
    2. 4 ÷ 6 = 4/6.
    3. 4/6 = 2/3 liter in simplest form.
    Fast methodThe amount shared goes on top and the number of shares goes on the bottom.
    Quick checkCheck: 6 × 2/3 = 12/3 = 4 liters ✓.
    Why the other choices are wrong
    • A (3/2): divided the number of runners by the liters (6 ÷ 4)
    • C (1/6): gave each runner one of 6 equal parts of only 1 liter
    • D (24): multiplied the liters by the number of runners

    Multiplying a mixed number by a fraction

    Method. To multiply with a mixed number, rename it as an improper fraction, multiply across, then simplify.

    Worked example. What is 1 3/5 × 5/6? Write the answer in simplest form.

    • (A) 1 1/2
    • (B) 1 1/3
    • (C) 2 13/30
    • (D) 1 23/25
    AnswerB — 1 1/3
    Step-by-step
    1. Change the mixed number to a fraction: 1 3/5 = 8/5.
    2. Multiply: 8/5 × 5/6 = 40/30.
    3. 40/30 = 4/3 = 1 1/3.
    Fast methodWrite the mixed number as an improper fraction, then multiply numerators and denominators.
    Quick checkCheck: 1 3/5 is a little less than 2 and 5/6 is less than 1, so the product is less than 1 3/5 ✓.
    Why the other choices are wrong
    • A (1 1/2): multiplied only the fraction part (3/5 × 5/6) and kept the whole number 1
    • C (2 13/30): added the numbers instead of multiplying
    • D (1 23/25): divided instead of multiplying (8/5 ÷ 5/6)

    Unit fraction divided by a whole number with a conversion

    Method. 1/b ÷ n = 1/(b × n); then convert units using the formula sheet.

    Worked example. Mr. Lee pours 1/2 gallon of juice equally into 4 glasses. How many cups of juice are in each glass? Use the formula sheet: 1 gal = 4 qt, 1 qt = 2 pt, 1 pt = 2 c.

    • (A) 8 cups
    • (B) 1/8 cup
    • (C) 1 cup
    • (D) 2 cups
    AnswerD — 2 cups
    Step-by-step
    1. Each glass gets 1/2 ÷ 4 = 1/(2 × 4) = 1/8 gallon.
    2. 1 gallon = 4 × 2 × 2 = 16 cups.
    3. 1/8 of 16 cups = 16 ÷ 8 = 2 cups.
    Fast methodDivide the unit fraction by the whole number, then convert gallons to cups.
    Quick checkCheck: 4 glasses × 2 cups = 8 cups, and 8 cups = 4 pints = 2 quarts = 1/2 gallon ✓.
    Why the other choices are wrong
    • A (8 cups): changed 1/2 gallon to 8 cups but did not divide by 4 glasses
    • B (1/8 cup): found 1/8 gallon but did not change gallons to cups
    • C (1 cup): changed 1/8 gallon only to pints (1 pint) and called it cups

    Measurement Conversions, Line Plots, and Data Displays

    Convert units within one system, in either direction (M05.D-M.1.1.1); the grade 5 formula sheet gives the table of equivalencies. Changing a larger unit to a smaller unit means multiply; changing a smaller unit to a larger unit means divide. For chains such as gallons to cups, multiply one step at a time. Line plots with fractions (M05.D-M.2.1.1): each X is one value, so multiply a value by its number of X marks before adding; to share a total equally, add all the values and divide by the number of values. Read tallies, tables, pictographs, bar graphs, and line graphs carefully (M05.D-M.2.1.2): check the key or scale, count part symbols, and on a line graph the change between two points is the difference of their values.

    Key formulas
    Customary length1 mi=1,760 yd=5,280 ft, 1 yd=3 ft, 1 ft=12 in.1\ \text{mi}=1{,}760\ \text{yd}=5{,}280\ \text{ft},\ 1\ \text{yd}=3\ \text{ft},\ 1\ \text{ft}=12\ \text{in.}
    Customary weight and capacity1 T=2,000 lb, 1 lb=16 oz, 1 gal=4 qt, 1 qt=2 pt, 1 pt=2 c, 1 c=8 fl oz1\ \text{T}=2{,}000\ \text{lb},\ 1\ \text{lb}=16\ \text{oz},\ 1\ \text{gal}=4\ \text{qt},\ 1\ \text{qt}=2\ \text{pt},\ 1\ \text{pt}=2\ \text{c},\ 1\ \text{c}=8\ \text{fl oz}
    Metric1 km=1,000 m, 1 m=100 cm, 1 cm=10 mm, 1 kg=1,000 g, 1 g=1,000 mg, 1 L=1,000 mL1\ \text{km}=1{,}000\ \text{m},\ 1\ \text{m}=100\ \text{cm},\ 1\ \text{cm}=10\ \text{mm},\ 1\ \text{kg}=1{,}000\ \text{g},\ 1\ \text{g}=1{,}000\ \text{mg},\ 1\ \text{L}=1{,}000\ \text{mL}
    Direction of a conversionlarge→small: multiply;small→large: divide\text{large}\to\text{small: multiply};\quad\text{small}\to\text{large: divide}
    Equal share from a line ploteach share=sum of all valuesnumber of values\text{each share}=\dfrac{\text{sum of all values}}{\text{number of values}}

    Converting meters to centimeters

    Method. To change a larger unit to a smaller unit, multiply; to change a smaller unit to a larger unit, divide.

    Worked example. A table is 1.5 meters long. How many centimeters long is the table? Use 1 m = 100 cm.

    • (A) 150
    • (B) 15
    • (C) 1,500
    • (D) 0.015
    AnswerA — 150
    Step-by-step
    1. Meters are larger than centimeters, so multiply.
    2. 1.5 × 100 = 150 centimeters.
    Fast methodLarger unit to smaller unit: multiply by the number of small units in one large unit.
    Quick checkCheck: 150 ÷ 100 = 1.5 m ✓.
    Why the other choices are wrong
    • B (15): multiplied by 10 instead of 100
    • C (1,500): multiplied by 1,000 instead of 100
    • D (0.015): divided by 100 instead of multiplying

    Line plot computation

    Method. Read each X on a line plot as one data value; multiply a value by the number of X marks above it, then add.

    Worked example. A line plot shows the lengths, in inches, of 8 beetles: 1/4, 1/4, 1/2, 1/2, 1/2, 3/4, 3/4, and 1. What is the combined length of the beetles that are longer than 1/2 inch?

    • (A) 1 3/4 inches
    • (B) 4 inches
    • (C) 2 1/2 inches
    • (D) 4 1/2 inches
    AnswerC — 2 1/2 inches
    Step-by-step
    1. Longer than 1/2 inch means the lengths 3/4, 3/4, and 1.
    2. 3/4 + 3/4 = 6/4 = 1 1/2.
    3. 1 1/2 + 1 = 2 1/2 inches.
    Fast methodPick only the X marks to the right of 1/2, then add them.
    Quick checkCheck: 2 1/2 is less than 3 × 1 = 3 and more than 3 × 3/4 = 2 1/4 ✓.
    Why the other choices are wrong
    • A (1 3/4 inches): added each length longer than 1/2 inch only once (3/4 + 1)
    • B (4 inches): also included the three beetles that are exactly 1/2 inch long
    • D (4 1/2 inches): added the lengths of all 8 beetles

    Pictograph with partial symbols

    Method. Multiply the number of symbols (including part symbols) by the value of one symbol.

    Worked example. In a pictograph, each book symbol stands for 4 books. Ana's row shows 5 1/2 symbols, Ben's row shows 3 symbols, and Cy's row shows 4 1/4 symbols. How many books did the three students read in all?

    • (A) 12 3/4
    • (B) 48
    • (C) 50
    • (D) 51
    AnswerD — 51
    Step-by-step
    1. Ana: 5 1/2 × 4 = 20 + 2 = 22 books.
    2. Ben: 3 × 4 = 12 books. Cy: 4 1/4 × 4 = 16 + 1 = 17 books.
    3. Total: 22 + 12 + 17 = 51 books.
    Fast methodAdd the symbols (12 3/4), then multiply by 4.
    Quick checkCheck: 12 3/4 × 4 = 48 + 3 = 51 ✓.
    Why the other choices are wrong
    • A (12 3/4): counted the symbols but did not multiply by 4 books per symbol
    • B (48): ignored the part symbols (12 whole symbols × 4)
    • C (50): counted each part of a symbol as 1 book (20 + 1 + 12 + 16 + 1)

    Volume of Rectangular Prisms

    Volume is the number of unit cubes that fill a solid with no gaps or overlaps, measured in cubic units (M05.D-M.3.1.1). For a right rectangular prism with whole-number edges, V = l × w × h, or V = B × h where B is the area of the base; a cube has V = s × s × s. These formulas are on the grade 5 formula sheet. If you know the volume and two edges, divide the volume by the product of the two edges to find the third. For a solid made of two non-overlapping rectangular prisms (M05.D-M.3.1.2), find each volume and add them. Traps: adding the edges, stopping at the base area, finding surface area, and treating a stepped solid as one box.

    Key formulas
    Rectangular prismV=l×w×hV=l\times w\times h
    Base times heightV=B×h,B=l×wV=B\times h,\quad B=l\times w
    CubeV=s×s×sV=s\times s\times s
    Missing edgeh=V÷(l×w)h=V\div(l\times w)
    Two non-overlapping prismsVtotal=V1+V2V_{\text{total}}=V_1+V_2

    Volume with V = l × w × h

    Method. Volume of a rectangular prism: V = l × w × h, or V = B × h where B is the area of the base.

    Worked example. A rectangular prism is 8 centimeters long, 5 centimeters wide, and 6 centimeters high. What is its volume?

    • (A) 19 cubic centimeters
    • (B) 240 cubic centimeters
    • (C) 40 cubic centimeters
    • (D) 236 cubic centimeters
    AnswerB — 240 cubic centimeters
    Step-by-step
    1. Use V = l × w × h from the formula sheet.
    2. V = 8 × 5 × 6 = 40 × 6 = 240 cubic centimeters.
    Fast methodMultiply the three edge lengths.
    Quick checkCheck: base 8 × 5 = 40 square cm, and 6 layers of 40 cubes = 240 ✓.
    Why the other choices are wrong
    • A (19 cubic centimeters): added the three dimensions
    • C (40 cubic centimeters): multiplied only the length and width
    • D (236 cubic centimeters): found the surface area, 2(40 + 48 + 30), instead of the volume

    Comparing volumes of a cube and a prism

    Method. Find each volume with its formula, then compare by subtracting.

    Worked example. A cube-shaped box has edges 5 inches long. Another box is a rectangular prism 6 inches long, 4 inches wide, and 5 inches high. Which box has the greater volume, and by how many cubic inches?

    • (A) The cube, by 5 cubic inches
    • (B) The prism, by 105 cubic inches
    • (C) The prism, by 95 cubic inches
    • (D) The cube, by 245 cubic inches
    AnswerA — The cube, by 5 cubic inches
    Step-by-step
    1. Cube: V = s × s × s = 5 × 5 × 5 = 125 cubic inches.
    2. Prism: V = 6 × 4 × 5 = 120 cubic inches.
    3. 125 − 120 = 5, so the cube is greater by 5 cubic inches.
    Fast methodFind both volumes with the formula sheet, then subtract.
    Quick checkCheck: 120 + 5 = 125 ✓.
    Why the other choices are wrong
    • B (The prism, by 105 cubic inches): found the cube's volume as 5 × 3 = 15 instead of 5 × 5 × 5
    • C (The prism, by 95 cubic inches): found the cube's volume as 5 × 5 = 25
    • D (The cube, by 245 cubic inches): added the two volumes instead of subtracting

    Volume of two joined prisms

    Method. Volume is additive: split the solid into non-overlapping prisms, find each volume, then add.

    Worked example. A concrete step is made of two non-overlapping rectangular prisms. The bottom prism is 10 feet long, 4 feet wide, and 2 feet high. The top prism sits on the bottom one and is 6 feet long, 4 feet wide, and 3 feet high. What is the total volume of the step?

    • (A) 200 cubic feet
    • (B) 80 cubic feet
    • (C) 152 cubic feet
    • (D) 72 cubic feet
    AnswerC — 152 cubic feet
    Step-by-step
    1. Bottom prism: 10 × 4 × 2 = 80 cubic feet.
    2. Top prism: 6 × 4 × 3 = 72 cubic feet.
    3. Total: 80 + 72 = 152 cubic feet.
    Fast methodFind the volume of each prism separately, then add.
    Quick checkCheck: 152 is less than the 200 cubic feet of a full 10 × 4 × 5 box, because the top part is shorter ✓.
    Why the other choices are wrong
    • A (200 cubic feet): treated the step as one box 10 ft by 4 ft by 5 ft (total height)
    • B (80 cubic feet): found the volume of only the bottom prism
    • D (72 cubic feet): found the volume of only the top prism