Grade 8 mathematics on the Pennsylvania System of School Assessment (PSSA), built on PDE's Assessment Anchors and Eligible Content. The real test is taken in two untimed sections (about 70–80 minutes each) with 40 scored multiple-choice questions and 3 open-ended questions scored 0–4, with a calculator on all but the first four questions, and a grade 8 formula sheet. Proficient and Advanced meet the standard. Here open-ended skills appear as multi-step questions with one final answer; the timer is a practice target.
06.01 Number System, Expressions and Equations (Grade 8)
Pennsylvania's PSSA Mathematics test for grade 8 is taken online in two untimed sections (about 70 to 80 minutes each); 40 multiple-choice or technology-enhanced questions and 3 open-ended questions count toward the score, and multiple-choice questions have four answer choices. Questions 1 to 4 of Section 1 are non-calculator; a calculator and a graphing tool are allowed for the rest, and a grade 8 formula sheet (including the exponent properties) is provided. This topic covers rational and irrational numbers, exponents, square and cube roots, scientific notation, proportional relationships and slope, linear equations with one, no or infinitely many solutions, and systems of two linear equations. For a 20-question practice paper, aim for about 55 minutes; this is a practice target, not a real time limit.
A rational number can be written as a fraction of two integers, so its decimal form either ends or repeats a block of digits. An irrational number, such as π or the square root of a whole number that is not a perfect square, has a decimal form that never ends and never repeats. To write a repeating decimal as a fraction, call it x, multiply by 10, 100 or 1,000 to line up the repeating block, and subtract. To estimate a square root without a calculator, find the two perfect squares on either side of the radicand. Common traps: thinking any decimal with a pattern is rational, multiplying by 10 when two digits repeat, and estimating a square root by halving the number.
Key formulas
Rational number
ba with a,b integers,b=0
Repeating block of two digits
x=0.ab⇒100x−x=ab⇒x=99ab
One digit before the repeat
x=0.cd⇒100x−10x=cd−c
Estimating a square root
m2<n<k2⇒m<n<k
Irrational examples
π,2,3,0.1010010001…
Identifying an irrational number
Method. Rational numbers end or repeat; square roots of non-perfect squares are irrational.
Worked example. Which number is irrational?
(A) √36
(B) √40
(C) −2/5
(D) 0.181818…, with 18 repeating
AnswerB — √40
Step-by-step
√36 = 6, so it is rational. −2/5 is a fraction of integers, so it is rational.
0.181818… repeats the block 18, so it is rational (it equals 18/99 = 2/11).
40 is not a perfect square (6² = 36 and 7² = 49), so √40 never ends and never repeats: it is irrational.
Fast methodA square root is irrational only when the radicand is not a perfect square.
Quick checkCheck: 6² = 36 < 40 < 49 = 7², so √40 is not a whole number ✓.
Why the other choices are wrong
A (√36): thought every square root is irrational; √36 = 6 is rational
C (−2/5): thought a negative fraction is irrational
D (0.181818…, with 18 repeating): thought a decimal that never ends is irrational, but this one repeats
Repeating decimal to a fraction
Method. Multiply by a power of 10 that shifts one full repeating block, then subtract.
Worked example. Which fraction is equal to 0.272727…, where the block 27 repeats?
(A) 27/100
(B) 3/10
(C) 2/7
(D) 3/11
AnswerD — 3/11
Step-by-step
Let x = 0.272727… . Two digits repeat, so multiply by 100: 100x = 27.272727… .
Subtract: 100x − x = 27.2727… − 0.2727…, so 99x = 27.
x = 27/99 = 3/11.
Fast methodA two-digit repeating block goes over 99, then simplify.
Quick checkCheck: 3 ÷ 11 = 0.272727… ✓.
Why the other choices are wrong
A (27/100): treated the decimal as if it ended after two places
B (3/10): subtracted 10x instead of x: 27/90 = 3/10
C (2/7): wrote the digits 2 and 7 as a fraction
Ordering rational and irrational numbers
Method. Write every number as a decimal approximation, then compare place by place.
Worked example. Which list shows √30, 11/2 and 5.444… (the digit 4 repeats) in order from least to greatest?
(A) 5.444…, √30, 11/2
(B) √30, 5.444…, 11/2
(C) 11/2, √30, 5.444…
(D) 5.444…, 11/2, √30
AnswerA — 5.444…, √30, 11/2
Step-by-step
11/2 = 5.5.
5² = 25 and 6² = 36, so √30 is between 5 and 6. Try tenths: 5.4² = 29.16 and 5.5² = 30.25, so √30 is between 5.4 and 5.5.
Try hundredths: 5.45² = 29.7025 < 30, so √30 is more than 5.45, which is more than 5.444… .
Order: 5.444…, √30, 11/2.
Fast methodSquare the decimal values to compare them with 30.
B (√30, 5.444…, 11/2): estimated √30 as 5.4, which is less than 5.444…
C (11/2, √30, 5.444…): listed the numbers from greatest to least
D (5.444…, 11/2, √30): estimated √30 as 6 because 30 is close to 36
Exponents, Roots and Scientific Notation
Grade 8 uses the integer exponent properties without a calculator, and final answers are written with positive exponents. The formula sheet lists the exponent properties. Know the perfect squares up to 12² and the perfect cubes up to 5³. The equation x² = p has two solutions, the positive and the negative square root; x³ = p has one. In scientific notation the first factor is at least 1 and less than 10. To multiply or divide, work with the first factors and the powers of 10 separately; to add or subtract, first write both numbers with the same power of 10. A calculator may show scientific notation as a number, the letter E and the exponent. Common traps: multiplying exponents when you should add them, losing a negative sign, and dropping the negative square root.
Key formulas
Product and quotient of powers
am⋅an=am+n,anam=am−n
Power of a power
(am)n=amn
Zero and negative exponents
a0=1,a−n=an1(a=0)
Square and cube equations
x2=p⇒x=±p,x3=p⇒x=3p
Scientific notation
N=c×10n,1≤c<10,n an integer
Multiplying in scientific notation
(c1×10m)(c2×10n)=(c1c2)×10m+n
Product of powers
Method. With the same base, add exponents to multiply and subtract exponents to divide.
Worked example. Use am × an = am+n and a−n = 1/an. Which expression is equivalent to 54 × 5−7, written with a positive exponent?
(A) 53
(B) 1/528
(C) 1/53
(D) 1/253
AnswerC — 1/53
Step-by-step
Same base, so add the exponents: 4 + (−7) = −3.
54 × 5−7 = 5−3.
A negative exponent means a reciprocal: 5−3 = 1/53.
Fast methodAdd the exponents, then flip a negative exponent to the denominator.
Quick checkCheck: 54 ÷ 57 also gives 1/53 ✓.
Why the other choices are wrong
A (53): added the exponents but lost the negative sign
B (1/528): multiplied the exponents 4 and −7
D (1/253): multiplied the bases 5 × 5 as well as adding exponents
Solving a square equation
Method. Isolate x² or x³ first, then take the square root (±) or the cube root.
Worked example. What are the solutions of 2x² = 72?
(A) x = 6 only
(B) x = 36 or x = −36
(C) x = 6 or x = −6
(D) x = √72 or x = −√72
AnswerC — x = 6 or x = −6
Step-by-step
Divide both sides by 2: x² = 36.
Two numbers square to 36: 6 and −6.
So x = 6 or x = −6.
Fast methodGet x² alone, then take ± the square root.
Quick checkCheck: 2(6²) = 72 and 2((−6)²) = 72 ✓.
Why the other choices are wrong
A (x = 6 only): found the positive square root and dropped the negative one
B (x = 36 or x = −36): divided by 2 but did not take the square root
D (x = √72 or x = −√72): took the square root of 72 before dividing both sides by 2
Adding in scientific notation
Method. To add or subtract, rewrite both numbers with the same power of 10 first.
Worked example. A city recycled 4.6 × 106 pounds of paper last year and 750,000 pounds of glass. What is the total, in pounds, written in scientific notation?
(A) 5.35 × 106
(B) 1.21 × 107
(C) 5.35 × 105
(D) 4.675 × 106
AnswerA — 5.35 × 106
Step-by-step
Write 750,000 with the same power of 10: 750,000 = 0.75 × 106.
Add the first factors: 4.6 + 0.75 = 5.35.
The total is 5.35 × 106 pounds, and 5.35 is between 1 and 10.
Fast methodMatch the powers of 10, then add the first factors.
B (1.21 × 107): added 4.6 + 7.5 without matching the powers of 10
C (5.35 × 105): added correctly but used the smaller power of 10
D (4.675 × 106): wrote 750,000 as 0.075 × 106 instead of 0.75 × 106
Proportional Relationships, Slope and y = mx + b
In a proportional relationship y = kx, the unit rate k is the slope of the graph, and the graph is a line through the origin. To compare two proportional relationships shown in different ways (an equation, a table, a graph described by points, or words), find each unit rate. Any two right triangles drawn along the same line, with legs that are horizontal and vertical, are similar, so the ratio rise ÷ run is the same everywhere on the line. That is why a line has one slope m, and a line that crosses the y-axis at b has the equation y = mx + b. Common traps: using run ÷ rise, confusing a total with a rate, and using a y-value that is not on the y-axis as b.
Key formulas
Proportional relationship
y=kx,k=xy(unit rate)
Slope from two points
m=x2−x1y2−y1=runrise
Line through the origin
y=mx
Line crossing the y-axis at (0, b)
y=mx+b
Finding b from a point
b=y1−mx1
Interpreting a unit rate
Method. The unit rate of a proportional relationship is the slope of its graph.
Worked example. At a farm stand, the equation y = 2.75x gives the cost y, in dollars, of x pounds of peaches. What does 2.75 represent?
(A) The number of pounds you can buy for $1
(B) The cost when 0 pounds are bought
(C) The total cost of all the peaches at the stand
(D) The cost of 1 pound of peaches, which is the slope of the graph
AnswerD — The cost of 1 pound of peaches, which is the slope of the graph
Step-by-step
In y = kx, k is the unit rate: the change in y for each 1 added to x.
Here y is dollars and x is pounds, so 2.75 is dollars per pound.
The unit rate is also the slope of the line y = 2.75x.
Fast methodIn y = kx, k is “y per one x”.
Quick checkCheck: x = 1 gives y = 2.75 dollars for 1 pound ✓.
Why the other choices are wrong
A (The number of pounds you can buy for $1): read the rate as pounds per dollar instead of dollars per pound
B (The cost when 0 pounds are bought): confused the slope with the y-intercept, which is 0 here
C (The total cost of all the peaches at the stand): confused a unit rate with a total
Using slope triangles
Method. Similar slope triangles along a line all have the same rise ÷ run.
Worked example. A line passes through the points (2, 1) and (6, 4). Which point is also on this line?
(A) (10, 8)
(B) (10, 7)
(C) (9, 8)
(D) (12, 8)
AnswerB — (10, 7)
Step-by-step
From (2, 1) to (6, 4), the run is 4 and the rise is 3, so the slope is 3/4.
A slope triangle with the same run and rise starting at (6, 4) is similar to the first one, so it ends at (6 + 4, 4 + 3) = (10, 7).
So (10, 7) is on the line.
Fast methodRepeat the same run and rise from a known point.
A (y = −(3/2)x + 7): used the y-value 7 as the y-intercept, but (−2, 7) is not on the y-axis
C (y = (3/2)x + 10): lost the negative sign of the slope
D (y = −(2/3)x + 17/3): found run ÷ rise instead of rise ÷ run
Linear Equations and Systems
A linear equation in one variable can have one solution, no solution (the variable terms cancel and a false statement such as 3 = 5 is left), or infinitely many solutions (both sides are the same expression). Solve equations with fraction or decimal coefficients by using the distributive property, collecting like terms and keeping both sides balanced. A system of two linear equations is solved where the two lines meet: use substitution, elimination, or a graph to estimate. Some systems can be solved by inspection, for example when one equation's left side is a multiple of the other's but the right sides do not match, the lines are parallel and there is no solution. Common traps: distributing to only the first term, a sign error when moving a term, and answering with x when the question asks for something else.
Key formulas
One solution
ax+b=cx+d,a=c
No solution
ax+b=ax+d,b=d
Infinitely many solutions
ax+b=ax+b
Distributive property
a(bx+c)=abx+ac
Solution of a system
(x,y)makes both equations true: the point where the lines meet
Counting solutions
Method. Simplify each side: different x-coefficients give one solution; same x-coefficients give none or infinitely many.
Worked example. How many solutions does the equation 3(x + 2) = 3x + 6 have?
(A) No solution
(B) Exactly one solution
(C) Infinitely many solutions
(D) Exactly two solutions
AnswerC — Infinitely many solutions
Step-by-step
Distribute: 3(x + 2) = 3x + 6.
Both sides are the same expression, 3x + 6 = 3x + 6.
Every value of x makes it true, so there are infinitely many solutions.
Fast methodSimplify both sides; identical sides mean infinitely many solutions.
Quick checkCheck: x = 0 gives 6 = 6 and x = 10 gives 36 = 36 ✓.
Why the other choices are wrong
A (No solution): saw the x-terms cancel and thought that always means no solution
B (Exactly one solution): assumed every linear equation has exactly one solution
D (Exactly two solutions): counted the two sides of the equation as two solutions
Fraction coefficients
Method. Collect like terms on each side, then undo addition before multiplication.
Worked example. What value of x makes (2/3)x − 4 = (1/6)x + 5 true?
(A) 2
(B) 4.5
(C) 10.8
(D) 18
AnswerD — 18
Step-by-step
Subtract (1/6)x from both sides: (2/3 − 1/6)x − 4 = 5, so (1/2)x − 4 = 5.
Add 4 to both sides: (1/2)x = 9.
Divide by 1/2 (multiply by 2): x = 18.
Fast methodCollect x-terms on one side, numbers on the other.
A (2): moved −4 with the wrong sign, getting (1/2)x = 1
B (4.5): multiplied 9 by 1/2 instead of dividing by 1/2
C (10.8): added the x-terms instead of subtracting, getting (5/6)x = 9
Writing and solving a system
Method. Write one equation per fact in the story, then solve by substitution or elimination.
Worked example. A school sold 40 tickets to a play. Adult tickets cost $9 and student tickets cost $6. The school collected $318. How many adult tickets were sold?
(A) 26
(B) 14
(C) 78
(D) 53
AnswerA — 26
Step-by-step
Let a = adult tickets and s = student tickets: a + s = 40 and 9a + 6s = 318.
Substitute s = 40 − a: 9a + 6(40 − a) = 318, so 3a + 240 = 318.
3a = 78, so a = 26 (and s = 14).
Fast methodWrite one equation for the count and one for the money, then substitute.
06.02 Functions, Geometry and Statistics (Grade 8)
This topic covers the Pennsylvania grade 8 eligible content for Functions (B-F), Geometry (C-G) and Statistics and Probability (D-S): functions and linear models, qualitative graphs, transformations, congruence and similarity, the Pythagorean theorem, volumes of cylinders, cones and spheres, scatter plots, lines of best fit and two-way tables. The grade 8 PSSA Mathematics test is taken online in two untimed sections (about 70 to 80 minutes each); 52 questions are given, and 40 multiple-choice or technology-enhanced questions (1 point each) and 3 open-ended questions (4 points each) count. Questions 1 to 4 of Section 1 are non-calculator; a calculator and a graphing tool are allowed for the rest. A grade 8 formula sheet is provided (its headings include the Pythagorean theorem, cone, cylinder, sphere and the distance formula), and the formulas you need are also given in the questions here. Multiple-choice questions have four answer choices; some questions here ask you to type an answer.
A function gives each input exactly one output; a repeated output is fine, but an input paired with two outputs is not. A linear function has a constant rate of change and fits y = mx + b; a function such as y = x² is nonlinear because its rate of change is not constant. To build a linear model, find the rate of change (change in y ÷ change in x) and the initial value (the y-value when x = 0) from a description, two points, a table or a graph. To compare two functions, find the rate and the initial value of each, even when one is a table and the other is an equation. A graph described in words can be read for where it increases, decreases or stays constant, and whether each part is straight or curved. Traps: dividing one total by one input instead of using two points, and reading a table whose x-values do not go up by 1.
Key formulas
Function
each input x has exactly one output y
Rate of change (slope)
m=x2−x1y2−y1
Linear function
y=mx+b,b=value of y when x=0
Initial value from a point
b=y1−mx1
Nonlinear example
y=x2(rate of change is not constant)
Deciding whether a relation is a function
Method. A relation is a function when every input has exactly one output; repeated outputs are allowed.
Worked example. The relation {(−2, 3), (0, 3), (2, 5), (4, 7)} pairs each input x with an output y. Is the relation a function?
(A) Yes, because each input is paired with exactly one output.
(B) No, because the output 3 is paired with two different inputs.
(C) No, because one of the inputs is negative.
(D) Yes, because all of the outputs are odd numbers.
AnswerA — Yes, because each input is paired with exactly one output.
Step-by-step
List the inputs: −2, 0, 2, 4. No input appears twice.
Each input therefore has exactly one output, so the relation is a function.
Two inputs sharing the output 3 is allowed.
Fast methodLook only at the x-values: if none repeats, it is a function.
Quick checkCheck: a vertical line through any input meets only one point ✓.
Why the other choices are wrong
B (No, because the output 3 is paired with two different inputs.): thought a repeated output breaks the function rule
C (No, because one of the inputs is negative.): thought the inputs of a function must be positive
D (Yes, because all of the outputs are odd numbers.): gave a reason that has nothing to do with the definition of a function
Linear model from two values
Method. Rate of change = change in y ÷ change in x; initial value b = y − m·x from either point.
Worked example. A plumber charges a fixed fee plus the same amount for each hour of work. A 2-hour job costs $150, and a 5-hour job costs $285. Which equation gives the total cost y, in dollars, for a job that takes x hours?
(A) y = 75x
(B) y = 57x
(C) y = 45x + 60
(D) y = 45x + 105
AnswerC — y = 45x + 60
Step-by-step
Rate of change: (285 − 150) ÷ (5 − 2) = 135 ÷ 3 = 45 dollars per hour.
Fast methodChange in cost ÷ change in hours gives the slope; back up to x = 0 for the fee.
Quick checkCheck: 45 × 5 + 60 = 285 ✓.
Why the other choices are wrong
A (y = 75x): divided $150 by 2 hours and ignored the fixed fee
B (y = 57x): divided $285 by 5 hours and ignored the fixed fee
D (y = 45x + 105): subtracted only one hour's charge from $150 to find the fee
Comparing two functions
Method. Find the rate of change and the initial value of each representation, then compare like with like.
Worked example. Function A is y = −4x + 30. Function B starts at 12 when x = 0 and increases by 5 each time x increases by 1. Which statement correctly compares the two functions?
(A) Function B has the greater initial value, and Function A has the greater rate of change.
(B) Function A has the greater initial value, and Function B has the greater rate of change.
(C) Both functions are increasing.
(D) Function A has the greater rate of change, because 30 is greater than 12.
AnswerB — Function A has the greater initial value, and Function B has the greater rate of change.
Step-by-step
Function A: rate of change −4, initial value 30. Function B: rate of change 5, initial value 12.
Initial values: 30 > 12, so Function A has the greater initial value.
Rates: 5 > −4, so Function B has the greater rate of change (B increases, A decreases).
Fast methodWrite each function as rate and start value side by side, then compare each pair.
Quick checkCheck: at x = 1, A = 26 (down from 30) and B = 17 (up from 12) ✓.
Why the other choices are wrong
A (Function B has the greater initial value, and Function A has the greater rate of change.): swapped the initial values and the rates of the two functions
C (Both functions are increasing.): ignored the negative sign in −4
D (Function A has the greater rate of change, because 30 is greater than 12.): confused the initial value with the rate of change
Transformations, Congruence and Similarity
Translations, reflections and rotations are rigid motions: the image has the same side lengths and angle measures, lines stay lines and parallel lines stay parallel, so the image is congruent to the original. A dilation multiplies every length by the scale factor but keeps angle measures, so the image is similar. Use coordinate rules to find images, and test a sequence of transformations on every vertex, not just one. The order of steps can matter: a dilation followed by a translation can give a different image than the translation followed by the dilation. To undo a sequence, undo the last step first.
Key formulas
Translation
(x,y)→(x+a,y+b)
Reflections
x-axis: (x,y)→(x,−y);y-axis: (x,y)→(−x,y)
Rotations about the origin
90∘ ccw: (−y,x);180∘: (−x,−y);90∘ cw: (y,−x)
Dilation about the origin
(x,y)→(kx,ky),lengths×k
Congruent vs similar
rigid motions⇒≅;dilations⇒∼
Translating a point
Method. A translation adds the same amount to every x-coordinate and the same amount to every y-coordinate.
Worked example. Point P(3, −2) is translated 4 units left and 5 units up. What are the coordinates of the image P′?
(A) (7, 3)
(B) (−1, −7)
(C) (−2, 2)
(D) (−1, 3)
AnswerD — (−1, 3)
Step-by-step
Left 4 changes x: 3 − 4 = −1.
Up 5 changes y: −2 + 5 = 3.
P′ is (−1, 3).
Fast methodLeft/right changes x; up/down changes y.
Quick checkCheck: from (−1, 3), move right 4 and down 5 to get back to (3, −2) ✓.
Why the other choices are wrong
A ((7, 3)): moved 4 units right instead of left
B ((−1, −7)): moved 5 units down instead of up
C ((−2, 2)): used the vertical move on x and the horizontal move on y
Rotating a point
Method. Use the coordinate rules: 90° counterclockwise (−y, x); 180° (−x, −y); 90° clockwise (y, −x).
Worked example. Point T(4, 1) is rotated 90° counterclockwise about the origin. What are the coordinates of T′?
(A) (−1, 4)
(B) (1, −4)
(C) (−4, −1)
(D) (1, 4)
AnswerA — (−1, 4)
Step-by-step
A 90° counterclockwise rotation about the origin maps (x, y) to (−y, x).
(4, 1) → (−1, 4).
Fast methodSwap the coordinates, then make the new first coordinate the opposite.
Quick checkCheck: (4, 1) is in Quadrant I; a quarter turn counterclockwise lands in Quadrant II, and (−1, 4) is in Quadrant II ✓.
Why the other choices are wrong
B ((1, −4)): used the 90° clockwise rule (x, y) → (y, −x)
C ((−4, −1)): used the 180° rotation rule
D ((1, 4)): swapped the coordinates without changing a sign
Dilation and segment length
Method. A dilation multiplies every length by the scale factor; angle measures stay the same.
Worked example. Segment AB has endpoints A(1, 2) and B(4, 6). It is dilated by a scale factor of 3 with the center of dilation at the origin. What is the length of the image segment A′B′? (Pythagorean theorem: a² + b² = c², where c is the hypotenuse.)
Fast methodFind AB = √(3² + 4²) = 5, then multiply by the scale factor 3.
Quick checkCheck: 15 ÷ 5 = 3, the scale factor ✓.
Why the other choices are wrong
A (5 units): thought a dilation keeps lengths the same
B (45 units): multiplied the length by 3 twice
D (21 units): added the horizontal and vertical changes of A′B′ instead of using the Pythagorean theorem
The Pythagorean Theorem and Volume
In a right triangle the hypotenuse is the longest side, across from the right angle, and a² + b² = c². Use it to find a missing side in two dimensions, a diagonal in three dimensions (find a face diagonal first), and the distance between two points (the horizontal and vertical changes are the legs). The converse tells whether a triangle is right: square the two shorter sides and compare with the square of the longest side, even when the lengths are not listed in order. Volumes of cylinders, cones and spheres come from the given formulas; square the radius, use the radius and not the diameter, and remember that a cone is one third of the matching cylinder. Answers can be left in terms of π or found with 3.14 or the calculator's π.
Key formulas
Pythagorean theorem
a2+b2=c2
Converse
a2+b2=c2⇒right triangle (c longest side)
Distance between two points
d=(x2−x1)2+(y2−y1)2
Cylinder
V=πr2h
Cone
V=31πr2h
Sphere
V=34πr3
Setting up the Pythagorean theorem
Method. In a right triangle, the square of the hypotenuse equals the sum of the squares of the legs.
Worked example. A right triangle has legs of 5 centimeters and 9 centimeters. The hypotenuse is c centimeters. Which equation can be used to find c? (Pythagorean theorem: a² + b² = c², where c is the hypotenuse.)
(A) c = 5 + 9
(B) c² = 5² + 9²
(C) c² = 9² − 5²
(D) 5² = c² + 9²
AnswerB — c² = 5² + 9²
Step-by-step
The hypotenuse is the side across from the right angle, so it is c.
The legs are a = 5 and b = 9, so c² = 5² + 9².
Fast methodHypotenuse squared = leg squared + leg squared.
Quick checkCheck: c² = 25 + 81 = 106, and √106 ≈ 10.3 is longer than each leg ✓.
Why the other choices are wrong
A (c = 5 + 9): added the legs without squaring
C (c² = 9² − 5²): subtracted the squares as if finding a leg
D (5² = c² + 9²): treated a leg as the hypotenuse
Volume of a cone
Method. Substitute the radius and height into the given volume formula; square the radius before multiplying.
Worked example. A cone has a radius of 3 inches and a height of 4 inches. What is its volume? Use V = (1/3)πr²h and leave your answer in terms of π.
Fast methodFind the cylinder volume πr²h, then take one third of it.
Quick checkCheck: a cylinder of the same size holds 36π, and 36π ÷ 3 = 12π ✓.
Why the other choices are wrong
A (36π cubic inches): forgot to multiply by 1/3
B (4π cubic inches): did not square the radius
C (48π cubic inches): used the diameter, 6 inches, as the radius
Pythagorean theorem in three dimensions
Method. For a 3-D length, find a diagonal of one face first, then use it as a leg with the third edge.
Worked example. A storage box is a rectangular prism 3 feet wide, 4 feet long, and 12 feet tall. What is the length of the longest straight rod that fits inside the box, from one bottom corner to the opposite top corner? (Pythagorean theorem: a² + b² = c², where c is the hypotenuse.)
(A) 13 feet
(B) 19 feet
(C) 5 feet
(D) about 12.6 feet
AnswerA — 13 feet
Step-by-step
Diagonal of the bottom face: √(3² + 4²) = √25 = 5 feet.
That diagonal and the 12-foot height are the legs of a new right triangle.
Rod length: √(5² + 12²) = √169 = 13 feet.
Fast methodUse the Pythagorean theorem twice: once on the base, once with the height.
C (5 feet): found only the diagonal of the bottom face
D (about 12.6 feet): used only the length and the height, √(4² + 12²)
Scatter Plots, Lines of Best Fit and Two-Way Tables
A scatter plot of two quantities can show positive or negative association, linear or nonlinear association, clusters, and outliers (points far from the overall pattern). A line of best fit follows the trend with points close to it on both sides; a line with all points above or below it is a poor fit. In a linear model y = mx + b, the slope is the predicted change in y for each 1-unit increase in x, and the y-intercept is the predicted y when x = 0; use the equation to predict y or to solve for x. In a two-way table, a relative frequency is a count divided by a total; to look for association, compare the relative frequencies within each row (or each column), not the raw counts.
Key formulas
Linear model
y^=mx+b
Slope in context
m=change in y for each 1-unit increase in x
Relative frequency
relative frequency=totalcount in a cell
Association test
a+bavsc+dc(compare rows)
Describing association
Method. Look at the overall trend: rising points show positive association, falling points show negative association.
Worked example. In a study of students, as height increases, shoe size tends to increase. Which describes the association shown on a scatter plot of height and shoe size?
(A) A negative association
(B) No association
(C) A positive association
(D) Every point lies on one straight line
AnswerC — A positive association
Step-by-step
Both quantities tend to increase together.
When y tends to increase as x increases, the association is positive.
Fast methodUp together = positive; one up, one down = negative.
Quick checkCheck: a line of best fit through such data would have a positive slope ✓.
Why the other choices are wrong
A (A negative association): mixed up positive and negative association
B (No association): thought a pattern that is not exact shows no association
D (Every point lies on one straight line): thought 'tends to increase' means an exact relationship
Interpreting the y-intercept of a model
Method. Slope = change in y per 1 unit of x; y-intercept = predicted y when x = 0, both in the context's units.
Worked example. The line of best fit y = 2.5x + 40 predicts a test score y for a student who studies x hours. What does the number 40 represent?
(A) The number of points gained for each hour of study
(B) The predicted score for a student who studies 0 hours
(C) The highest possible score on the test
(D) The number of hours needed to score 2.5 points
AnswerB — The predicted score for a student who studies 0 hours
Step-by-step
In y = mx + b, b is the value of y when x = 0.
Here x = 0 means 0 hours of study, so 40 is the predicted score with no studying.
Fast methodSet x = 0 and read what y means.
Quick checkCheck: y = 2.5(0) + 40 = 40 ✓.
Why the other choices are wrong
A (The number of points gained for each hour of study): confused the y-intercept with the slope
C (The highest possible score on the test): thought the constant is a maximum
D (The number of hours needed to score 2.5 points): mixed up the input and output variables
Association in a two-way table
Method. To test for association, compare relative frequencies within each group, not raw counts.
Worked example. A survey asked students whether they play a school sport. Of 60 seventh graders, 42 play a sport. Of 80 eighth graders, 40 play a sport. Which statement is supported by the data?
(A) There is no association, because 42 and 40 are almost equal.
(B) There is no association, because about 59% of all students surveyed play a sport.
(C) Eighth graders are more likely to play a sport, because more eighth graders were surveyed.
(D) There is an association: 70% of seventh graders play a sport, but only 50% of eighth graders do.
AnswerD — There is an association: 70% of seventh graders play a sport, but only 50% of eighth graders do.
Step-by-step
Seventh graders: 42 ÷ 60 = 0.70 = 70%.
Eighth graders: 40 ÷ 80 = 0.50 = 50%.
The row relative frequencies differ by a lot, so grade and playing a sport are associated.
Fast methodTurn each row into a percent of its own row total, then compare.
A (There is no association, because 42 and 40 are almost equal.): compared counts instead of relative frequencies
B (There is no association, because about 59% of all students surveyed play a sport.): used one overall relative frequency instead of comparing the two grades
C (Eighth graders are more likely to play a sport, because more eighth graders were surveyed.): compared the group sizes