Virginia SOL End-of-Course Mathematics · Math EOC · Algebra 2
Algebra 2: Study Guide
The Virginia Algebra 2 end-of-course Standards of Learning (SOL) test, built on the 2023 Mathematics SOL and VDOE's 2023 test blueprint. The real test is untimed and online, with 48 scored questions, the Desmos graphing calculator on every question, and the Algebra 2 formula sheet and z-table. A scaled score of 400 passes and can earn a verified credit toward the Standard Diploma. Some real questions are technology-enhanced; here those skills appear as questions with one final answer, and the timer is a practice target.
03.01 Expressions and Operations (Algebra 2)
This topic covers Reporting Category 1 of the Virginia SOL Algebra 2 end-of-course test, Expressions and Operations (A2.EO.1–A2.EO.4): rational expressions and complex fractions, radicals and rational exponents, polynomial operations and factoring, and complex numbers. The Algebra 2 SOL test is an online, untimed, fixed-form test of 48 scored questions plus 8 field-test questions, and 11 of the 48 scored questions come from this reporting category. The Desmos Virginia Graphing calculator is available on every question, and the Algebra 2 formula sheet (with the quadratic formula, z-score, standard deviation, permutation and combination formulas) and the z-table can be opened during the test, but none of the rules in this topic are on the sheet. Questions are multiple choice or ask you to type an answer; passing the test (400 in 2025–26; the new Algebra 2 proficient cut of 443 is phased in from 2026–27) earns a verified credit.
Rational Expressions and Complex Fractions (A2.EO.1)
A rational expression is a fraction whose numerator and denominator are polynomials. On the Algebra 2 SOL test you add, subtract, multiply and divide rational expressions whose factors are linear or quadratic, and you simplify complex fractions (fractions with fractions inside them). Always factor completely first, then cancel only whole factors that appear in a numerator and a denominator; terms joined by + or − can never be canceled. To add or subtract, rewrite every fraction over the least common denominator and put each numerator in parentheses before subtracting. To divide, multiply by the reciprocal of the divisor only. Watch for opposite factors such as p − q and q − p, whose quotient is −1. Answers are "equivalent for all values for which the expression is defined," so values that make any original denominator zero stay excluded.
Key formulas
Multiplying
qp⋅sr=qspr
Dividing (multiply by the reciprocal)
qp÷sr=qp⋅rs
Adding or subtracting with a common denominator
dp±dr=dp±r
Opposite factors
q−pp−q=−1(p=q)
Cancel factors, never terms
(x−m)(x−t)(x−m)(x−n)=x−tx−n,x=m,x=t
Simplifying a rational expression (A2.EO.1)
Method. Factor the numerator and denominator completely, then divide out common factors.
Worked example. Which expression is equivalent to (x² − 16)/(x² + 2x − 8) for all values of x for which it is defined?
(A) (x + 4)/(x + 2)
(B) (x − 4)/(x − 2)
(C) (x + 4)/(x − 2)
(D) −8/(x − 4)
AnswerB — (x − 4)/(x − 2)
Step-by-step
Factor the numerator as a difference of squares: x² − 16 = (x − 4)(x + 4).
Factor the denominator: x² + 2x − 8 = (x + 4)(x − 2), because 4 × (−2) = −8 and 4 + (−2) = 2.
Cancel the common factor x + 4: the expression is (x − 4)/(x − 2), for x ≠ −4 and x ≠ 2.
Fast methodFactor top and bottom completely, then cancel only whole common factors.
Quick checkCheck with x = 5: the original gives 1/3 and the answer gives 1/3 ✓.
Why the other choices are wrong
A ((x + 4)/(x + 2)): factored x² + 2x − 8 as (x − 4)(x + 2), with the signs swapped
C ((x + 4)/(x − 2)): factored x² − 16 as (x + 4)², a perfect square instead of a difference of squares
D (−8/(x − 4)): canceled the x² terms, which are terms, not factors, leaving −16/(2x − 8)
Subtracting rational expressions (A2.EO.1)
Method. Rewrite each fraction over the least common denominator, then combine the numerators.
Worked example. Which expression is equivalent to 5/(x + 1) − 2/(x − 3) for all values of x for which it is defined?
Dividing by x − 3 means multiplying by 1/(x − 3): (3 − x)/(3x(x − 3)).
Write 3 − x = −(x − 3) and cancel x − 3: the result is −1/(3x), for x ≠ 0 and x ≠ 3.
Fast methodMultiply the top and bottom of the complex fraction by 3x: (3 − x)/(3x(x − 3)) = −1/(3x).
Quick checkCheck with x = 2: the original gives −1/6 and the answer gives −1/6 ✓.
Why the other choices are wrong
B (1/(3x)): treated 3 − x as if it were x − 3 and lost the negative sign
C (0): combined 1/x − 1/3 as (1 − 1)/(x − 3), subtracting numerators and denominators
D (−(x − 3)²/(3x)): multiplied by x − 3 instead of dividing by it
Radicals and Rational Exponents (A2.EO.2)
Simplify radicals with numeric and algebraic radicands by pulling out the largest perfect power that matches the index: perfect squares for square roots, perfect cubes for cube roots. A rational exponent is another way to write a radical: in xm/n the denominator n is the index and the numerator m is the power. Convert radicals to exponents when you must multiply or divide powers of the same base, then use the exponent rules. A radical expression is in simplest form when no perfect power is left under the radical and no radical is left in a denominator. To rationalize a single radical in the denominator, multiply by that radical over itself; for a binomial denominator, multiply by its conjugate. Common traps: adding radicands, forgetting the leftover factor under the radical, and writing the perfect square itself outside instead of its root.
Key formulas
Rational exponents
xm/n=nxm=(nx)m
Product and quotient of radicals
npq=npnq,nqp=nqnp
Exponent rules
xm⋅xn=xm+n,xnxm=xm−n,(xm)n=xmn
Like radicals combine
pq+rq=(p+r)q
Conjugates
(p+q)(p−q)=p2−q
Rational exponent to radical form (A2.EO.2)
Method. Use xm/n = ⁿ√(xm): the denominator is the index.
Worked example. For x > 0, which expression is equivalent to x3/5?
(A) ∛(x⁵)
(B) x³/5
(C) ⁵√(x³)
(D) 1/⁵√(x³)
AnswerC — ⁵√(x³)
Step-by-step
In xm/n, the denominator n is the index of the root and the numerator m is the power.
Here n = 5 and m = 3, so x3/5 = ⁵√(x³).
Fast methodDenominator = root, numerator = power ("power over root").
Quick checkCheck with x = 32: 323/5 = 8, and ⁵√(32³) = ⁵√32768 = 8 ✓.
Why the other choices are wrong
A (∛(x⁵)): swapped the index and the power, using 3 as the index
B (x³/5): read the exponent 3/5 as "cube, then divide by 5"
D (1/⁵√(x³)): treated a fractional exponent as if it made a reciprocal
Simplifying a radical with an algebraic radicand (A2.EO.2)
Method. Factor the radicand into a perfect-square part and a leftover part; take the square root of the perfect-square part.
Worked example. For x ≥ 0 and y ≥ 0, which expression is equivalent to √(48x⁵y²)?
(A) 4x²y√(3x)
(B) 4x²y√3
(C) 16x²y√(3x)
(D) 4x²y²√(3x)
AnswerA — 4x²y√(3x)
Step-by-step
Split into perfect squares: 48 = 16 × 3, x⁵ = x⁴ × x, and y² is already a perfect square.
√16 = 4, √(x⁴) = x², √(y²) = y.
What is left under the radical is 3x, so √(48x⁵y²) = 4x²y√(3x).
Fast methodTake out the largest perfect-square factor of the number and half of each even exponent.
Quick checkCheck with x = 3, y = 1: √(48 × 243) = √11664 = 108, and 4 × 9 × 1 × √9 = 108 ✓.
Why the other choices are wrong
B (4x²y√3): dropped the leftover factor x that stays under the radical
C (16x²y√(3x)): wrote the perfect square 16 outside instead of its square root 4
D (4x²y²√(3x)): did not take the square root of y², leaving y² outside
Rationalizing a binomial denominator (A2.EO.2)
Method. To clear a binomial radical denominator, multiply top and bottom by its conjugate.
Worked example. Which expression is equivalent to 6/(3 − √3) with a rational denominator?
(A) 3 − √3
(B) (3 + √3)/2
(C) 2 − 2√3
(D) 3 + √3
AnswerD — 3 + √3
Step-by-step
Multiply the numerator and denominator by the conjugate 3 + √3.
Denominator: (3 − √3)(3 + √3) = 9 − 3 = 6.
Numerator: 6(3 + √3). So the expression is 6(3 + √3)/6 = 3 + √3.
Fast methodMultiply by the conjugate; (a − √b)(a + √b) = a² − b.
A (3 − √3): multiplied by 3 − √3 instead of the conjugate and still wrote 9 − 3 as the denominator
B ((3 + √3)/2): used 9 + 3 = 12 as the denominator, forgetting that (−√3)(√3) = −3
C (2 − 2√3): split the fraction over the two terms of the denominator, as 6/3 − 6/√3
Polynomial Operations and Factoring (A2.EO.3)
Add and subtract polynomials by combining like terms; when subtracting, change the sign of every term in the second polynomial. Multiply by distributing every term of one factor to every term of the other. Divide by a monomial term by term, and by a binomial or a factorable trinomial with long division (synthetic division works for x − c). On the SOL test you factor polynomials in one or two variables completely over the integers, with no more than four terms: take out the greatest common factor first, try grouping for four terms, and then use the special patterns for the difference of squares, perfect square trinomials, and the sum and difference of cubes. A sum of squares such as x² + c² (c ≠ 0) does not factor over the integers. Check every factorization by multiplying it back out.
Key formulas
Difference of squares
p2−q2=(p−q)(p+q)
Perfect square trinomials
p2±2pq+q2=(p±q)2
Sum of cubes
p3+q3=(p+q)(p2−pq+q2)
Difference of cubes
p3−q3=(p−q)(p2+pq+q2)
Division check
dividend=divisor×quotient+remainder
Factoring completely: GCF and difference of squares (A2.EO.3)
Method. Always remove the GCF first, then factor what remains until no factor can be factored again.
Worked example. Which shows 2x³ − 18x factored completely over the integers?
(A) 2x(x − 3)²
(B) 2x(x − 9)(x + 9)
(C) 2x(x − 3)(x + 3)
(D) 2(x − 3)(x + 3)
AnswerC — 2x(x − 3)(x + 3)
Step-by-step
Take out the greatest common factor 2x: 2x(x² − 9).
x² − 9 is a difference of squares: (x − 3)(x + 3).
Factored completely: 2x(x − 3)(x + 3).
Fast methodGCF first, then look for a special pattern in what is left.
Quick checkCheck with x = 2: 2(8) − 18(2) = −20, and 2(2)(−1)(5) = −20 ✓.
Why the other choices are wrong
A (2x(x − 3)²): treated x² − 9 as a perfect square trinomial
B (2x(x − 9)(x + 9)): used 9 instead of √9 = 3 in the difference of squares
D (2(x − 3)(x + 3)): dropped the common factor x when writing the GCF
Factoring a sum of cubes (A2.EO.3)
Method. Identify a and b as cube roots of the two terms, then apply the sum or difference of cubes pattern.
Worked example. Which is the factored form of 27x³ + 8?
(A) (3x + 2)(9x² + 6x + 4)
(B) (3x + 2)(9x² − 6x + 4)
(C) (3x + 2)(9x² − 12x + 4)
(D) (3x − 2)(9x² + 6x + 4)
AnswerB — (3x + 2)(9x² − 6x + 4)
Step-by-step
Write each term as a cube: 27x³ = (3x)³ and 8 = 2³, so a = 3x and b = 2.
A (x² − 7): subtracted −2x² wrongly, getting −5x² − 2x² = −7x² instead of −3x²
B (x² + x − 5): divided each term by x² only, ignoring x − 2 in the divisor, and dropped the leftover terms
C (x² + 3): made a sign error on the second quotient term, writing +3 instead of −3
Complex Numbers (A2.EO.4)
The imaginary unit i is defined by i² = −1. A square root of a negative number is written with i first: √(−n) = i√n for n > 0, and then √n is simplified. Complex numbers are written in a + bi form, where a is the real part and b is the imaginary part. Add and subtract by combining real parts and imaginary parts; multiply like binomials and replace i² with −1. The powers of i repeat in a cycle of four, so divide the exponent by 4 and use the remainder. Trap: the rule √p · √q = √(pq) does not hold when both p and q are negative, so change each radical to i form before multiplying. (Dividing complex numbers is not part of this standard.)
Key formulas
Imaginary unit
i=−1,i2=−1
Square root of a negative number
−n=in(n>0)
Powers of i
i1=i,i2=−1,i3=−i,i4=1
Adding complex numbers
(p+qi)+(r+si)=(p+r)+(q+s)i
Multiplying complex numbers
(p+qi)(r+si)=(pr−qs)+(ps+qr)i
Square root of a negative number (A2.EO.4)
Method. Write √(−k) as i√k, then simplify √k.
Worked example. Which expression is equivalent to √(−50)?
(A) 5i√2
(B) −5√2
(C) 25i√2
(D) 5i√10
AnswerA — 5i√2
Step-by-step
√(−50) = √(−1) × √50 = i√50.
50 = 25 × 2, so √50 = 5√2.
So √(−50) = 5i√2.
Fast methodPull out i first, then simplify the positive radical.
A (−2 − 5i): squared 2 + i as 4 + i², leaving out the middle term 4i
C (4 − i): used i² = 1 in both products
D (−2 + 9i): subtracted the real parts but added the imaginary parts: (3 − 5) + (4 + 5)i
03.02 Equations and Inequalities (Algebra 2)
This topic covers the Virginia Algebra 2 Equations and Inequalities standards (A2.EI.1–A2.EI.6): absolute value equations and inequalities, quadratic equations over the complex numbers and quadratic inequalities, linear-quadratic and quadratic-quadratic systems, rational and radical equations with extraneous solutions, and polynomial equations of degree three or higher; this reporting category is 14 of the 48 scored questions (about 29%). The Algebra 2 End-of-Course SOL test is an online fixed form and is untimed, with 48 scored questions plus 8 field-test questions, both multiple choice and technology-enhanced. The Desmos Virginia Graphing calculator is available on every question, and you may view the Algebra 2 formula sheet (which includes the quadratic formula) and the z-table. Passing earns a verified credit: the passing score is 400 on the 0–600 scale in 2025–26, and higher cut scores (443 for Proficient in Algebra II when fully phased in) begin in 2026–27.
Standard A2.EI.1: solve absolute value equations and inequalities in one variable and write the solution set in set notation, in interval notation or as a number-line description. First get the absolute value alone on one side. An equation |u| = c with c > 0 splits into u = c or u = −c; |u| = 0 has one solution; |u| equal to a negative number has no solution. For inequalities, “less than” gives one “and” piece between two numbers, and “greater than” gives two “or” pieces pointing outward. Interval notation uses parentheses for strict inequalities (< or >) and brackets for ≤ or ≥. Traps: splitting before isolating, forgetting to reverse the sign when you multiply or divide by a negative number, using “and” where “or” is needed, and keeping a case that fails when x also appears outside the absolute value (always check those).
Key formulas
Equation
∣u∣=c(c>0)⇒u=c or u=−c
No solution
∣u∣=cwithc<0⇒∅
Less than (and)
∣u∣<c⟺−c<u<c
Greater than (or)
∣u∣>c⟺u<−c or u>c
Set and interval notation
{x∣a≤x<b}=[a,b),{x∣x<a or x>b}=(−∞,a)∪(b,∞)
Absolute value equation: isolate first (A2.EI.1)
Method. Isolate the absolute value, then split it into two linear equations, one for each sign.
Worked example. What is the solution set of 3|x − 1| + 2 = 14?
(A) {−3, 5}
(B) {−5, 3}
(C) {5}
(D) {−13/3, 5}
AnswerA — {−3, 5}
Step-by-step
Subtract 2 from both sides: 3|x − 1| = 12.
Divide by 3: |x − 1| = 4.
So x − 1 = 4 or x − 1 = −4.
x = 5 or x = −3.
Fast methodGet the absolute value alone, then write two equations: inside = +4 and inside = −4.
Fast methodLess than → one piece between two numbers; strict inequality → parentheses.
Quick checkCheck x = 0: |3| − 4 = −1 < 7 ✓; x = 4: |11| − 4 = 7, not < 7 ✓.
Why the other choices are wrong
A ((−∞, −7) ∪ (4, ∞)): wrote an “or” (outside) solution, which belongs to a “greater than” inequality
B ((−5, 2)): forgot to add 4 first and solved |2x + 3| < 7
D ([−7, 4]): used brackets, but the inequality is strict (<), so −7 and 4 are not included
Absolute value inequality with a negative coefficient (A2.EI.1)
Method. Isolate the absolute value, reversing the inequality whenever you multiply or divide by a negative number.
Worked example. Which is the solution set of −2|x + 1| + 6 < −4?
(A) (−6, 4)
(B) (−∞, −6) ∪ (4, ∞)
(C) (−∞, −4) ∪ (6, ∞)
(D) (−∞, −6] ∪ [4, ∞)
AnswerB — (−∞, −6) ∪ (4, ∞)
Step-by-step
Subtract 6: −2|x + 1| < −10.
Divide by −2 and reverse the sign: |x + 1| > 5.
“Greater than” gives two pieces: x + 1 < −5 or x + 1 > 5.
x < −6 or x > 4, which is (−∞, −6) ∪ (4, ∞).
Fast methodAfter isolating, |x + 1| > 5 means x is more than 5 units from −1.
Quick checkCheck x = 5: −2(6) + 6 = −6 < −4 ✓; x = 0: −2(1) + 6 = 4, not < −4 ✓.
Why the other choices are wrong
A ((−6, 4)): did not reverse the inequality sign when dividing by −2
C ((−∞, −4) ∪ (6, ∞)): used the wrong sign inside, solving |x − 1| > 5
D ((−∞, −6] ∪ [4, ∞)): included −6 and 4, but the inequality is strict
Quadratic and Polynomial Equations; Quadratic Inequalities
Standards A2.EI.2 and A2.EI.6: solve quadratic equations over the complex numbers, solve quadratic inequalities over the real numbers, and solve polynomial equations of degree three or higher. Use the quadratic formula (it is on the Algebra 2 formula sheet) or factoring; when the discriminant b² − 4ac is negative, write the two solutions as a conjugate pair p + qi and p − qi, using √(−n) = i√n. For a quadratic inequality, get 0 on one side, find the zeros, and test one value in each interval or picture the parabola. A polynomial equation of degree n has n solutions over the complex numbers when repeated solutions are counted by their multiplicity, and with real coefficients its imaginary solutions come in conjugate pairs. Factor by taking out a GCF, by grouping, as a quadratic in x², or with the sum or difference of cubes; a known solution r gives the factor (x − r). Traps: dividing by x and losing x = 0, forgetting to divide the imaginary part by 2a, and dropping imaginary solutions because they are not real.
Key formulas
Quadratic formula
x=2a−b±b2−4ac
Discriminant
b2−4ac>0:2 real;=0:1 real;<0:2 imaginary
Imaginary unit
i2=−1,−n=in(n>0)
Conjugate pairs
p+qiis a solution⇒p−qiis a solution (real coefficients)
Solution r and factor
P(r)=0⟺(x−r)is a factor ofP(x)
Sum and difference of cubes
a3±b3=(a±b)(a2∓ab+b2)
Square root method with an imaginary result (A2.EI.2)
Method. Isolate the squared expression, take ± the square root, and write √(−n) as i√n.
Worked example. What are the solutions of (x + 3)² = −4 over the complex numbers?
(A) 3 ± 2i
(B) −3 ± 4i
(C) −5 and −1
(D) −3 ± 2i
AnswerD — −3 ± 2i
Step-by-step
Take the square root of both sides: x + 3 = ±√(−4).
B (−3, −1 + i, −1 − i): used b instead of −b in the quadratic formula
C (−3 only): stopped after the real solution, thinking x² − 2x + 2 = 0 has no solutions
D (−3, 1 + 2i, 1 − 2i): did not divide the imaginary part by 2: wrote (2 ± 2i)/2 as 1 ± 2i
Linear-Quadratic and Quadratic-Quadratic Systems
Standard A2.EI.3: solve systems made of a line and a parabola, or of two parabolas of the form y = ax² + bx + c, algebraically and graphically, and tell how many solutions there are. Set the two expressions for y equal, collect everything on one side, and solve the quadratic; then substitute each x back to get its y. The number of real solutions (0, 1 or 2) matches the discriminant of that combined quadratic: a line tangent to a parabola gives exactly one point. Two different parabolas meet in at most two points. On the test you may use the Desmos graphing calculator to look at the intersection points, but exact answers still come from the algebra. Traps: checking a point in only one equation, losing a solution by dividing by x, and adding instead of subtracting when you collect terms.
Key formulas
Substitution
y=f(x)andy=g(x)⇒f(x)=g(x)
Collect on one side
f(x)−g(x)=0⇒Ax2+Bx+C=0
Number of solutions
B2−4AC>0:2,=0:1(tangent),<0:0
Solution check
(x0,y0)must satisfy both equations
Parabola and horizontal line (A2.EI.3)
Method. Substitute one equation into the other, solve for x, then find each matching y.
Worked example. The graph of y = (x − 3)² + 2 is a parabola with vertex (3, 2) that opens upward. What is the solution set of the system y = (x − 3)² + 2 and y = 6?
(A) {(5, 6)}
(B) {(−5, 6), (−1, 6)}
(C) {(1, 6), (5, 6)}
(D) {(3 − 2√2, 6), (3 + 2√2, 6)}
AnswerC — {(1, 6), (5, 6)}
Step-by-step
Substitute y = 6: (x − 3)² + 2 = 6.
Subtract 2: (x − 3)² = 4.
x − 3 = 2 or x − 3 = −2, so x = 5 or x = 1.
Both points have y = 6: (1, 6) and (5, 6).
Fast methodThe line y = 6 is above the vertex of an upward parabola, so expect two points.
A ({(5, 6)}): took only the positive square root, x − 3 = 2
B ({(−5, 6), (−1, 6)}): used the wrong sign inside the parentheses, solving (x + 3)² = 4
D ({(3 − 2√2, 6), (3 + 2√2, 6)}): added 2 instead of subtracting it: (x − 3)² = 8
Quadratic-quadratic system (A2.EI.3)
Method. Set the two expressions for y equal, solve the resulting quadratic, and substitute back for y.
Worked example. What is the solution set of the system y = x² − 4x + 1 and y = −x² + 2x + 1?
(A) {(3, −2)}
(B) {(0, 1), (−3, 22)}
(C) {(0, 1)}
(D) {(0, 1), (3, −2)}
AnswerD — {(0, 1), (3, −2)}
Step-by-step
Set the right sides equal: x² − 4x + 1 = −x² + 2x + 1.
Add x², subtract 2x and subtract 1: 2x² − 6x = 0.
Factor: 2x(x − 3) = 0, so x = 0 or x = 3.
y = 0 − 0 + 1 = 1 and y = 9 − 12 + 1 = −2.
Fast methodSet equal, collect on one side, and factor out the common factor 2x.
Quick checkCheck (3, −2) in the second equation: −9 + 6 + 1 = −2 ✓.
Why the other choices are wrong
A ({(3, −2)}): divided both sides of 2x² − 6x = 0 by x and lost x = 0
B ({(0, 1), (−3, 22)}): made a sign error and got 2x² + 6x = 0
C ({(0, 1)}): treated −x² on the right as +x², so the x² terms canceled, leaving −4x = 2x and only x = 0
Linear-quadratic system in context (A2.EI.3)
Method. Write one equation by setting the two models equal, solve, and keep only solutions that fit the condition in the question.
Worked example. An arch is modeled by y = −0.5x² + 8, and a straight ramp is modeled by y = 0.5x + 5, where x and y are in feet. At which point with x > 0 does the ramp meet the arch?
(A) (2, 6)
(B) (3, 6.5)
(C) (4, 0)
(D) (6, 8)
AnswerA — (2, 6)
Step-by-step
Set the expressions equal: −0.5x² + 8 = 0.5x + 5.
Move everything to one side: −0.5x² − 0.5x + 3 = 0.
Multiply by −2: x² + x − 6 = 0, so (x + 3)(x − 2) = 0.
x = 2 (x = −3 is not > 0). y = 0.5(2) + 5 = 6.
Fast methodClear the decimals by multiplying the equation by −2 before factoring.
Quick checkCheck in the arch: −0.5(4) + 8 = 6 ✓.
Why the other choices are wrong
B ((3, 6.5)): factored x² + x − 6 with the wrong signs, (x − 3)(x + 2), and used x = 3
C ((4, 0)): found where the arch meets the ground (y = 0) instead of where it meets the ramp
D ((6, 8)): set the ramp equal to 8, the top of the arch, instead of to the arch equation
Rational and Radical Equations
Standards A2.EI.4 and A2.EI.5: solve rational equations that reduce to linear or quadratic equations, and equations with no more than one radical, and identify extraneous solutions. For a rational equation, factor the denominators, list the excluded values (numbers that make a denominator 0), multiply every term by the least common denominator, solve, and reject any answer that is an excluded value. For a radical equation, isolate the radical, raise both sides to the index (square for √, cube for ∛), solve, and check every answer in the original equation, because squaring can create extraneous solutions. A rational exponent is a radical: xm/n means the nth root of x, raised to the mth power. Traps: forgetting to multiply a whole-number term by the LCD, squaring a binomial without its middle term, and thinking a cube root cannot be negative (only square roots cannot).
Key formulas
Excluded values
q(x)p(x)is undefined whenq(x)=0
Clear denominators
ba=dc⇒ad=bc(b=0,d=0)
Square root
u=v⇒u=v2(keep only answers withv≥0)
Cube root
3u=v⇒u=v3(vmay be negative)
Rational exponent
xm/n=(nx)m
Square of a binomial
(a+b)2=a2+2ab+b2
Excluded values of a rational equation (A2.EI.4)
Method. List the excluded values first; any “solution” equal to one of them is extraneous.
Worked example. Before solving 5/(x − 4) = x/(x + 1), which values of x must be excluded because they make a denominator 0?
(A) −4 and 1
(B) 4 and −1
(C) 4 only
(D) 0, 4 and −1
AnswerB — 4 and −1
Step-by-step
Set each denominator equal to 0.
x − 4 = 0 gives x = 4.
x + 1 = 0 gives x = −1.
So 4 and −1 can never be solutions.
Fast methodExcluded values come only from denominators.
Quick checkCheck: 4 − 4 = 0 and −1 + 1 = 0 ✓.
Why the other choices are wrong
A (−4 and 1): used the opposite signs of the numbers in the denominators
C (4 only): checked only the first denominator
D (0, 4 and −1): also excluded 0, but x = 0 makes no denominator 0
Rational equation with an extraneous solution (A2.EI.4)
Method. Multiply by the LCD, solve the polynomial equation, and reject any value that makes a denominator 0.
Worked example. What is the solution set of x/(x − 2) = 8/(x² − 4)?
(A) {−4, 2}
(B) {2}
(C) {−2, 4}
(D) {−4}
AnswerD — {−4}
Step-by-step
x² − 4 = (x − 2)(x + 2), so the LCD is (x − 2)(x + 2); x ≠ 2 and x ≠ −2.
Multiply both sides by the LCD: x(x + 2) = 8.
x² + 2x − 8 = 0, so (x + 4)(x − 2) = 0.
x = −4 or x = 2, but 2 is excluded. The solution set is {−4}.
Fast methodFactor the denominators first so you know the excluded values before you start.
Quick checkCheck x = −4: −4/(−6) = 2/3 and 8/12 = 2/3 ✓.
Why the other choices are wrong
A ({−4, 2}): kept x = 2, which makes a denominator 0
B ({2}): rejected the valid solution and kept the extraneous one
C ({−2, 4}): factored x² + 2x − 8 with the wrong signs, (x − 4)(x + 2)
Radical equation: squaring a binomial (A2.EI.5)
Method. Isolate the radical, square both sides (expanding binomials fully), solve, and check every answer in the original equation.
Worked example. What is the solution of √(x² + 9) = x + 1?
(A) no solution
(B) x = −4
(C) x = 4
(D) x = 5
AnswerC — x = 4
Step-by-step
Square both sides: x² + 9 = (x + 1)².
(x + 1)² = x² + 2x + 1, so x² + 9 = x² + 2x + 1.
Subtract x² and 1: 8 = 2x, so x = 4.
Check: √(16 + 9) = √25 = 5 and 4 + 1 = 5 ✓.
Fast method(x + 1)² has a middle term, 2x; it is not x² + 1.
Quick checkCheck x = 4: √25 = 5 = 4 + 1 ✓.
Why the other choices are wrong
A (no solution): squared x + 1 as x² + 1, which led to 9 = 1
B (x = −4): made a sign error and got 2x = −8
D (x = 5): gave the value of √(x² + 9) when x = 4 instead of x
03.03 Functions and Statistics (Algebra 2)
This topic covers the Virginia Algebra 2 Functions and Statistics standards (A2.F.1–A2.F.2, A2.ST.1–A2.ST.3): transformations of the square root, cube root, rational, exponential and logarithmic parent functions, direct and inverse variation, key features, inverses and composition of functions, normal distributions with z-scores and the Empirical Rule, curves of best fit, and permutations and combinations. This is the largest reporting category on the Algebra 2 SOL end-of-course test, about 23 of the 48 scored questions (48%). The test is an online fixed form, untimed, with 48 scored questions plus 8 field-test questions (56 in all), in multiple-choice and technology-enhanced formats, and the Desmos Virginia Graphing calculator is available on every question. You may use the Algebra 2 formula sheet (including z = (x − μ)/σ, σ, P(n, r) and C(n, r)) and the table of standard normal probabilities (z-table); passing earns a verified credit, with 400 of 600 to pass in 2025–26 and a higher phased-in cut score (final Proficient 443) starting in 2026–27.
Algebra 2 uses five parent functions: square root, cube root, rational (1/x), exponential (b to the x) and logarithmic (log base b). A change outside the function moves or stretches the graph vertically: f(x) + k moves it up k units, and kf(x) stretches it vertically by a factor of |k| when |k| > 1 and shrinks it when 0 < |k| < 1 (a negative k also reflects it over the x-axis). A change inside the function acts horizontally and in the opposite direction from what it looks like: f(x + k) moves the graph k units left, and f(kx) compresses it horizontally when |k| > 1 and stretches it horizontally when 0 < |k| < 1. To write an equation from a graph, use the starting point or the asymptotes for the shifts, then one more point to find a stretch factor; on the test, exponential and logarithmic equations from a graph use only one transformation. Direct variation has a constant ratio y/x (y = kx); inverse variation has a constant product xy (y = k/x). Traps: shifting the wrong way for f(x + k), confusing kf(x) with f(kx), and calling any decreasing table inverse variation.
Key formulas
Translations
f(x)+k:up kf(x+k):left k
Vertical stretch or reflection
kf(x):vertical stretch by ∣k∣;k<0 also reflects over the x-axis
Horizontal change
f(kx):horizontal compression by a factor of ∣k∣1;k<0 also reflects over the y-axis
Parent functions
y=x,y=3x,y=x1,y=bx,y=logbx
Direct and inverse variation
y=kx(xy=k)y=xk(xy=k)
Transformation from a table of values (A2.F.1)
Method. When every output changes by the same amount k, the new function is f(x) + k; a change to the input gives f(x + k).
Worked example. The table shows values of the parent function f(x) = √x and of a function g that is a transformation of f. For x = 0, 1, 4 and 9, the values of f(x) are 0, 1, 2 and 3, and the values of g(x) are 5, 6, 7 and 8. Which equation defines g?
(A) g(x) = √x + 5
(B) g(x) = √(x + 5)
(C) g(x) = 5√x
(D) g(x) = √(x − 5)
AnswerA — g(x) = √x + 5
Step-by-step
For every x in the table, g(x) is 5 more than f(x): 0 + 5 = 5, 1 + 5 = 6, 2 + 5 = 7, 3 + 5 = 8.
Adding 5 to every output is f(x) + 5, a vertical shift up 5 units.
So g(x) = √x + 5.
Fast methodCompare the outputs row by row: a constant difference means f(x) + k.
B (g(x) = √(x + 5)): put the 5 inside the square root (a horizontal shift) instead of adding it to the output
C (g(x) = 5√x): multiplied the outputs by 5 instead of adding 5 to them
D (g(x) = √(x − 5)): treated the change as a shift right by 5 instead of a shift up by 5
Inverse variation in context (A2.F.1)
Method. For inverse variation find k = xy from the known pair, then use y = k/x.
Worked example. The time it takes to paint a building varies inversely with the number of painters working. Four painters can paint the building in 9 hours. Working at the same rate, how many hours will it take 6 painters?
(A) 13.5 hours
(B) 1.5 hours
(C) 6 hours
(D) 7 hours
AnswerC — 6 hours
Step-by-step
Inverse variation: t = k/n, so k = t × n.
k = 9 × 4 = 36 painter-hours.
With 6 painters: t = 36 ÷ 6 = 6 hours.
Fast methodFor inverse variation the product stays the same: 4 × 9 = 6 × t.
Quick checkCheck: 6 × 6 = 36 = 4 × 9 ✓; more painters, less time ✓.
Why the other choices are wrong
A (13.5 hours): used direct variation: 9 × 6 ÷ 4
B (1.5 hours): divided 9 hours by 6 painters without finding the constant of variation
D (7 hours): subtracted 2 hours for the 2 extra painters
Square root function from two points (A2.F.1)
Method. Use the endpoint for the translations, then one more point to find the stretch factor.
Worked example. The graph of g is a transformation of the graph of f(x) = √x. The graph of g starts at the point (−3, 2) and passes through the point (1, 6). Which equation defines g?
(A) g(x) = 2√(x − 3) + 2
(B) g(x) = 2√(x + 3) + 2
(C) g(x) = 4√(x + 3) + 2
(D) g(x) = √(x + 3) + 2
AnswerB — g(x) = 2√(x + 3) + 2
Step-by-step
The starting point of √x is (0, 0). Moving it to (−3, 2) gives g(x) = a√(x + 3) + 2.
Use the point (1, 6): 6 = a√(1 + 3) + 2, so 4 = a × 2.
a = 2, so g(x) = 2√(x + 3) + 2.
Fast methodWrite a√(x − h) + k with (h, k) = the starting point, then plug in the second point to find a.
A (g(x) = 2√(x − 3) + 2): moved the starting x-value with the wrong sign inside the square root
C (g(x) = 4√(x + 3) + 2): used the rise 6 − 2 = 4 as the stretch factor without dividing by √4 = 2
D (g(x) = √(x + 3) + 2): translated the starting point but left out the vertical stretch
Features, Inverses and Composition of Functions
For square root, cube root, rational, polynomial, exponential, logarithmic and piecewise-defined functions you must find the domain, range, zeros and intercepts, discontinuities, where the function increases, decreases or stays constant, relative and absolute maximums and minimums, end behavior, and asymptotes. Exponential functions a·bx + k have a horizontal asymptote y = k; logarithmic functions log_b(x − h) have a vertical asymptote x = h and need a positive input. For a rational function, factor first: a factor that cancels gives a hole, and a factor left in the denominator gives a vertical asymptote. The inverse undoes the function: swap x and y and solve, and remember that the domain of the inverse is the range of the original (important for square root and quadratic functions). A composition f(g(x)) works from the inside out. Traps: treating f⁻¹(x) as 1/f(x), composing in the wrong order, including an asymptote value in a range, and reading increasing or decreasing intervals from the zeros instead of the turning points.
Key formulas
Composition
(f∘g)(x)=f(g(x))
Inverse
f−1(b)=a⟺f(a)=b;swap x and y, then solve for y
Exponential and logarithmic asymptotes
y=abx+k:y=ky=logb(x−h):x=h,domain x>h
Horizontal asymptote of a rational function
cxm+⋯axn+⋯:n<m⇒y=0;n=m⇒y=ca
End behavior
follows the leading term axn:n even⇒ ends match;n odd⇒ ends opposite
Evaluating a piecewise-defined function (A2.F.2)
Method. For a piecewise-defined function, first find the piece whose condition the input satisfies.
Worked example. A function is defined by f(x) = 2x + 1 when x < 3 and f(x) = x² − 4 when x ≥ 3. What is f(3)?
(A) 7
(B) 9
(C) 12
(D) 5
AnswerD — 5
Step-by-step
Decide which piece applies: x = 3 satisfies x ≥ 3, so use x² − 4.
f(3) = 3² − 4 = 9 − 4 = 5.
Fast methodCheck the condition first, then substitute into that piece only.
Quick checkCheck: 3 < 3 is false, so the first piece does not apply ✓.
Why the other choices are wrong
A (7): used the first piece, 2(3) + 1, although that piece is only for x < 3
B (9): squared 3 but forgot to subtract 4
C (12): added the values of both pieces, 7 + 5
End behavior of a polynomial (A2.F.2)
Method. Look only at the leading term: its degree (even or odd) and the sign of its coefficient decide the end behavior.
Worked example. Which statement describes the end behavior of f(x) = −2x⁵ + 3x² − 1?
(A) As x → ∞, f(x) → −∞, and as x → −∞, f(x) → −∞.
(B) As x → ∞, f(x) → −∞, and as x → −∞, f(x) → ∞.
(C) As x → ∞, f(x) → ∞, and as x → −∞, f(x) → −∞.
(D) As x → ∞, f(x) → ∞, and as x → −∞, f(x) → ∞.
AnswerB — As x → ∞, f(x) → −∞, and as x → −∞, f(x) → ∞.
Step-by-step
The end behavior follows the leading term −2x⁵.
The degree 5 is odd, so the two ends go in opposite directions.
The leading coefficient −2 is negative, so the right end falls: as x → ∞, f(x) → −∞, and the left end rises: as x → −∞, f(x) → ∞.
Fast methodOdd degree: ends opposite. Negative leading coefficient: right end down.
A (As x → ∞, f(x) → −∞, and as x → −∞, f(x) → −∞.): treated the odd-degree polynomial like an even-degree one (both ends the same)
C (As x → ∞, f(x) → ∞, and as x → −∞, f(x) → −∞.): ignored the negative leading coefficient
D (As x → ∞, f(x) → ∞, and as x → −∞, f(x) → ∞.): used the x² term instead of the leading term
Domain of a composition (A2.F.2)
Method. Write the composed rule first, then apply the domain restriction to the whole inside expression.
Worked example. Let f(x) = 2x − 3 and g(x) = √(x + 5). What is the domain of g(f(x))?
(A) [−1, ∞)
(B) [−5, ∞)
(C) [3/2, ∞)
(D) [1, ∞)
AnswerA — [−1, ∞)
Step-by-step
g(f(x)) = √((2x − 3) + 5) = √(2x + 2).
The radicand must be at least 0: 2x + 2 ≥ 0.
2x ≥ −2, so x ≥ −1. Domain: [−1, ∞).
Fast methodSubstitute f into g, then set the radicand ≥ 0.
Quick checkCheck: x = −1 gives √0 = 0 ✓; x = −2 gives √(−2), not real ✓.
Why the other choices are wrong
B ([−5, ∞)): used the domain of g alone instead of the composed function
C ([3/2, ∞)): required f(x) ≥ 0 instead of f(x) + 5 ≥ 0
D ([1, ∞)): solved 2x + 2 ≥ 0 with a sign error, getting x ≥ 1
Normal Distributions, z-Scores and the Empirical Rule
A normal distribution is symmetric and bell-shaped, with its mean, median and mode at the center. A z-score tells how many standard deviations a value is from the mean: positive above, negative below. Use z-scores to compare values from different distributions, and use x = μ + zσ to go back from a z-score to a data value. The Empirical Rule gives about 68%, 95% and 99.7% of the data within 1, 2 and 3 standard deviations; for a region that is not centered, split it at the mean and add half-percents. The z-table (the Table of Standard Normal Probabilities provided with the Algebra 2 formula sheet) is read as the area to the left of a z-score, as in the questions here; for 'greater than', subtract from 1, and for 'between', subtract the two left areas. Virginia treats the data as a population, so σ divides by n. Traps: using the left area when the question asks for more than, dividing by n − 1, and comparing raw scores instead of z-scores.
Key formulas
z-score
z=σx−μx=μ+zσ
Population standard deviation
σ=n∑(xi−μ)2
Empirical Rule
≈68% within 1σ,95% within 2σ,99.7% within 3σ
Using the z-table
P(z>a)=1−P(z<a),P(a<z<b)=P(z<b)−P(z<a)
Data value from a z-score (A2.ST.1)
Method. Rearrange the z-score formula to x = μ + zσ; a negative z means below the mean.
Worked example. Scores on a district reading test are normally distributed with mean μ = 72 and standard deviation σ = 8. Use z = (x − μ)/σ. A student's score has a z-score of −1.25. What is the student's score?
(A) 82
(B) 70.75
(C) 62
(D) 73.25
AnswerC — 62
Step-by-step
Solve z = (x − μ)/σ for x: x = μ + zσ.
x = 72 + (−1.25)(8) = 72 − 10 = 62.
Fast methodx = μ + zσ.
Quick checkCheck: (62 − 72)/8 = −10/8 = −1.25 ✓.
Why the other choices are wrong
A (82): added 1.25 standard deviations instead of subtracting
B (70.75): subtracted 1.25 points without multiplying by σ
D (73.25): added 1.25 points without multiplying by σ
Empirical Rule over an uneven interval (A2.ST.1)
Method. Convert each endpoint to a number of standard deviations, split at the mean, and add the half-percents.
Worked example. The lengths of a species of fish are normally distributed with mean 20 centimeters and standard deviation 4 centimeters. By the Empirical Rule, about 68% of values lie within 1 standard deviation of the mean, 95% within 2 and 99.7% within 3. About what percent of the fish are between 16 and 28 centimeters long?
(A) 95%
(B) 68%
(C) 47.5%
(D) 81.5%
AnswerD — 81.5%
Step-by-step
16 = 20 − 4 is 1 standard deviation below the mean; 28 = 20 + 2(4) is 2 standard deviations above.
From μ − σ to μ: half of 68% = 34%.
From μ to μ + 2σ: half of 95% = 47.5%.
Total: 34% + 47.5% = 81.5%.
Fast methodSplit the interval at the mean and use half of each Empirical Rule percent.
Quick checkCheck: 81.5% is between 68% and 95%, as the interval is wider than ±1σ but narrower than ±2σ ✓.
Why the other choices are wrong
A (95%): treated 16 to 28 as within 2 standard deviations on both sides
B (68%): treated 16 to 28 as within 1 standard deviation on both sides
C (47.5%): counted only the part from 20 to 28
Count from a z-table area (A2.ST.1)
Method. For 'more than', subtract the table's left-tail area from 1, then multiply by the group size.
Worked example. The lifetimes of 800 light bulbs are normally distributed with mean 1,000 hours and standard deviation 120 hours. Use z = (x − μ)/σ and the z-table value P(z < 1.25) = 0.8944. About how many of the bulbs are expected to last more than 1,150 hours?
(A) 84
(B) 716
(C) 128
(D) 106
AnswerA — 84
Step-by-step
z = (1,150 − 1,000)/120 = 150/120 = 1.25.
P(z > 1.25) = 1 − 0.8944 = 0.1056.
Expected number: 0.1056 × 800 = 84.48, about 84 bulbs.
Fast methodz, then 1 − table value, then multiply by the number of bulbs.
Quick checkCheck: 84 is about 10.5% of 800, a little less than the 16% above 1σ ✓.
Why the other choices are wrong
B (716): used the area to the left, 0.8944 × 800, instead of the area to the right
C (128): rounded z = 1.25 to 1 and used the Empirical Rule's 16%
D (106): found 1 − 0.8944 = 0.1056 but multiplied by 1,000 (the mean) instead of 800
Curves of Best Fit, Correlation and Counting
With bivariate data, use the graphing calculator to fit a linear, quadratic or exponential curve of best fit and use it to make predictions. Choose the model from the pattern: constant differences suggest linear, constant second differences suggest quadratic, and a constant ratio suggests exponential. For a linear fit, the correlation coefficient r is between −1 and 1: its sign gives the direction and its closeness to 1 or −1 gives the strength; r is not the slope and not r². Interpret the slope as the change in y for each one-unit increase in x. For counting, use permutations P(n, r) when order or positions matter and combinations C(n, r) when only the group matters. For several stages, multiply; for separate cases joined by 'or', add. Traps: using C when the positions are different, adding stages that should be multiplied, and forgetting to remove people already chosen.
Key formulas
Permutations
P(n,r)=(n−r)!n!
Combinations
C(n,r)=r!(n−r)!n!
Factorial
n!=n(n−1)(n−2)⋯2⋅1,0!=1
Correlation coefficient
−1≤r≤1;∣r∣ near 1⇒strong linear relationship
Curves of best fit
y=mx+b,y=ax2+bx+c,y=abx
Interpreting a regression slope (A2.ST.2)
Method. Read the slope as 'y-units per one x-unit' and the intercept as the predicted y when x = 0.
Worked example. A teacher used technology to find the line of best fit y = 3.2x + 41 for her students, where x is the number of hours a student studied and y is the student's test score. Which statement best interprets the slope?
(A) For each additional hour of study, the predicted test score increases by about 41 points.
(B) For each additional hour of study, the predicted test score increases by about 3.2 points.
(C) A student who does not study is predicted to score 3.2 points.
(D) For each additional 3.2 hours of study, the predicted test score increases by 1 point.
AnswerB — For each additional hour of study, the predicted test score increases by about 3.2 points.
Step-by-step
The slope is the change in y per 1-unit change in x.
Here y is the score and x is hours studied, so the slope 3.2 means about 3.2 more points per additional hour (as predicted by the model).
Fast methodSlope = (units of y) per (one unit of x).
Quick checkCheck: predicted scores for 2 and 3 hours are 47.4 and 50.6, a difference of 3.2 ✓.
Why the other choices are wrong
A (For each additional hour of study, the predicted test score increases by about 41 points.): used the y-intercept as the rate of change
C (A student who does not study is predicted to score 3.2 points.): described the slope as if it were the y-intercept
D (For each additional 3.2 hours of study, the predicted test score increases by 1 point.): reversed the roles of x and y in the rate
Permutations versus combinations (A2.ST.3)
Method. Use permutations when positions or order matter and combinations when only the group matters.
Worked example. A club has 10 members. How many more ways are there to choose a president, a vice president and a treasurer (three different people) than to choose a 3-person planning committee? Use P(n, r) = n!/(n − r)! and C(n, r) = n!/(r!(n − r)!).
A (720): found the number of officer choices, P(10, 3), but did not subtract the committees
B (120): found only the number of committees, C(10, 3)
D (6): found only 3! = 6, the number of ways to order one group of three
Combining permutations and combinations (A2.ST.3)
Method. Break the choice into stages, use P or C for each stage, then multiply.
Worked example. A club has 10 members. A president and a vice president are chosen first. Then a 3-person committee is chosen from the remaining members. In how many ways can this be done? Use P(n, r) = n!/(n − r)! and C(n, r) = n!/(r!(n − r)!).
(A) 146
(B) 10,800
(C) 2,520
(D) 5,040
AnswerD — 5,040
Step-by-step
Officers (order matters): P(10, 2) = 10 × 9 = 90.
8 members remain. Committee (order does not matter): C(8, 3) = 56.
The two choices happen together, so multiply: 90 × 56 = 5,040.
Fast methodCount each stage, then multiply the stage counts.