Virginia SOL Mathematics · Math · Grade 4

Grade 4: Study Guide

Grade 4 mathematics on the Virginia Standards of Learning (SOL) test, built on the 2023 Mathematics SOL and VDOE's 2023 test blueprint. The real test is an untimed online adaptive test with 36 scored questions, a four-function calculator on most questions (some questions are no-calculator), and no formula sheet. A scaled score of 400 is proficient. Some real questions are technology-enhanced (drag and drop, multiple select, hot spot); here those skills appear as questions with one final answer, and the timer is a practice target.

02.01 Number Sense and Computation (Grade 4)

This topic covers Virginia's grade 4 Number and Number Sense and Computation and Estimation standards (4.NS.1–4.NS.5 and 4.CE.1–4.CE.4): place value to nine digits, comparing and ordering whole numbers, fractions and decimals, fraction–decimal equivalents, and adding, subtracting, multiplying and dividing within the grade 4 limits. The Grade 4 SOL Mathematics test is an online, computer-adaptive test that is untimed; you must answer every question in the order given and cannot go back, and it has 36 scored questions plus 5 field-test and 6 additional questions, in multiple-choice and technology-enhanced formats. Questions on the starred skills taught here (fraction comparison and equivalence, fraction–decimal equivalents, and computing sums, differences, facts, products, quotients, like-denominator fraction sums and differences, whole number × unit fraction, and decimal sums and differences) are answered without a calculator, the other questions offer the Desmos Virginia Four-Function calculator, and there is no formula sheet in grade 4. Scores run from 0 to 600, with 400 to pass in 2025–26 and higher cut scores with an "Approaching" level phased in from 2026–27; a practice target for a 20-question paper is 50 minutes, but the real test has no time limit.

Place Value and Comparing Whole Numbers (4.NS.1, 4.NS.2)

Grade 4 whole numbers go up to nine digits (hundred millions). Each place is worth 10 times the place to its right, and commas split the number into groups of three: millions, thousands, ones. The value of a digit is the digit times the value of its place. To compare or order up to four whole numbers through seven digits, first count the digits (more digits means greater), then compare place by place from the left; the first place where the digits differ decides. Common traps: leaving out zeros that hold empty places, counting places from the wrong end, and judging a number by its first digit or by how many 9s it has. These skills are calculator-active on the test.

Key formulas
Place values in a nine-digit numberhundred millions, ten millions, millions∣hundred thousands, ten thousands, thousands∣hundreds, tens, ones\text{hundred millions, ten millions, millions}\mid\text{hundred thousands, ten thousands, thousands}\mid\text{hundreds, tens, ones}
Each place is 10 times the place to its right10×100,000=1,000,00010\times 100{,}000=1{,}000{,}000
Value of a digitvalue=digit×place value\text{value}=\text{digit}\times\text{place value}
Expanded form (zeros hold empty places)2,090,010=2,000,000+90,000+102{,}090{,}010=2{,}000{,}000+90{,}000+10
More digits means a greater whole number1,000,000>999,9991{,}000{,}000>999{,}999

Value of a digit

Method. Find the digit's place, then multiply the digit by the value of that place.

Worked example. What is the value of the digit 4 in 742,916,385?

  • (A) 40,000,000
  • (B) 4,000,000
  • (C) 400,000,000
  • (D) 4
AnswerA — 40,000,000
Step-by-step
  1. Name the places from the left: 7 is in the hundred-millions place and 4 is in the ten-millions place.
  2. A 4 in the ten-millions place has a value of 4 × 10,000,000 = 40,000,000.
Fast methodCount the digits after the 4: there are 7, so its value is 4 followed by 7 zeros.
Quick checkCheck: 742,916,385 = 700,000,000 + 40,000,000 + 2,916,385 ✓.
Why the other choices are wrong
  • B (4,000,000): counted one place too few and used the millions place
  • C (400,000,000): counted one place too many and used the hundred-millions place
  • D (4): gave the digit itself instead of its value

Ordering whole numbers

Method. Compare digits in the same place, starting from the greatest place; the first place where the digits differ decides.

Worked example. Which list shows the numbers 3,406,215; 3,460,125; 3,064,512; and 3,406,152 in order from least to greatest?

  • (A) 3,460,125; 3,406,215; 3,406,152; 3,064,512
  • (B) 3,064,512; 3,406,152; 3,406,215; 3,460,125
  • (C) 3,064,512; 3,406,215; 3,406,152; 3,460,125
  • (D) 3,460,125; 3,406,152; 3,406,215; 3,064,512
AnswerB — 3,064,512; 3,406,152; 3,406,215; 3,460,125
Step-by-step
  1. All four numbers have 3 millions, so compare the hundred-thousands digits: 3,064,512 has 0, the others have 4. So 3,064,512 is least.
  2. Compare the ten-thousands digits of the other three: 3,460,125 has 6, the others have 0. So 3,460,125 is greatest.
  3. For 3,406,215 and 3,406,152, the first different place is the hundreds: 1 < 2, so 3,406,152 < 3,406,215.
Fast methodLine the numbers up by place value and compare one place at a time from the left.
Quick checkCheck: each number in the list is greater than the one before it ✓.
Why the other choices are wrong
  • A (3,460,125; 3,406,215; 3,406,152; 3,064,512): put the numbers in order from greatest to least
  • C (3,064,512; 3,406,215; 3,406,152; 3,460,125): compared the tens digits (1 < 5) instead of the hundreds digits for 3,406,215 and 3,406,152
  • D (3,460,125; 3,406,152; 3,406,215; 3,064,512): compared only the last three digits (125 < 152 < 215 < 512)

Missing digit in a comparison

Method. Compare place by place from the left; when a digit is unknown, test the case where it ties.

Worked example. The comparison 6,4□8,315 > 6,457,902 is true. Which statement about the digit in the box is true?

  • (A) Only the digits 5, 6, 7, 8, and 9 work.
  • (B) Any digit 0 through 9 works.
  • (C) Only the digits 6, 7, 8, and 9 work.
  • (D) Only the digits 0, 1, 2, 3, and 4 work.
AnswerA — Only the digits 5, 6, 7, 8, and 9 work.
Step-by-step
  1. The millions (6) and hundred-thousands (4) digits match, so the ten-thousands place (the box) is compared with 5.
  2. If the box is 6, 7, 8 or 9, the first number is greater.
  3. If the box is 5, the ten-thousands digits tie; then the thousands digits decide: 8 > 7, so 5 also works.
  4. If the box is 0–4, the first number is less. So only 5, 6, 7, 8 and 9 work.
Fast methodTest the tie case (box = 5) on purpose; it is the trap.
Quick checkCheck: 6,458,315 > 6,457,902 ✓ and 6,448,315 < 6,457,902 ✓.
Why the other choices are wrong
  • B (Any digit 0 through 9 works.): compared the thousands digits (8 > 7) and skipped the ten-thousands place
  • C (Only the digits 6, 7, 8, and 9 work.): forgot that when the ten-thousands digits tie (5 = 5), the thousands digits decide, and 8 > 7
  • D (Only the digits 0, 1, 2, 3, and 4 work.): reversed the comparison and found the digits that make the first number less

Fractions and Decimals: Equivalence and Comparison (4.NS.3–4.NS.5)

Fractions in grade 4 have denominators of 12 or less and can be proper, improper or mixed numbers. Equivalent fractions name the same amount: multiply or divide the numerator and denominator by the same number. To compare, use like denominators (compare numerators), like numerators (the smaller denominator gives larger parts), or the benchmarks 0, 1/2 and 1. A whole-number division such as a ÷ b can be written as the fraction a/b. Decimals go through thousandths; annex zeros so the decimals have the same number of places, then compare from the left. Fraction–decimal equivalents use halves, fourths, fifths, tenths and hundredths. Traps: thinking a bigger denominator means a bigger fraction, reading 0.508 as greater than 0.61 because 508 > 61, and writing 1/4 as 0.14. On the test, fraction comparison and equivalence (4.NS.3a–f) and fraction–decimal equivalents (4.NS.5) have no calculator.

Key formulas
Equivalent fractionsab=a×nb×n\frac{a}{b}=\frac{a\times n}{b\times n}
Like numeratorsna>nb  when  a<b\frac{n}{a}>\frac{n}{b}\ \text{ when }\ a<b
Benchmark one halfab>12  when  2×a>b\frac{a}{b}>\frac{1}{2}\ \text{ when }\ 2\times a>b
Division as a fractiona÷b=aba\div b=\frac{a}{b}
Fraction–decimal facts12=0.5,  14=0.25,  15=0.2,  110=0.1,  1100=0.01\frac{1}{2}=0.5,\ \ \frac{1}{4}=0.25,\ \ \frac{1}{5}=0.2,\ \ \frac{1}{10}=0.1,\ \ \frac{1}{100}=0.01
Annexing zeros0.9=0.90=0.9000.9=0.90=0.900

Equivalent fractions

Method. Multiply (or divide) the numerator and denominator by the same whole number.

Worked example. Which fraction is equivalent to 3/4?

  • (A) 3/8
  • (B) 4/5
  • (C) 9/12
  • (D) 6/4
AnswerC — 9/12
Step-by-step
  1. To make an equivalent fraction, multiply the numerator and the denominator by the same number.
  2. 3 × 3 = 9 and 4 × 3 = 12, so 3/4 = 9/12.
Fast methodAsk: what times 4 gives the new denominator? Multiply the numerator by the same number.
Quick checkCheck: 9 ÷ 3 = 3 and 12 ÷ 3 = 4, so 9/12 simplifies back to 3/4 ✓.
Why the other choices are wrong
  • A (3/8): doubled only the denominator
  • B (4/5): added 1 to the numerator and to the denominator
  • D (6/4): doubled only the numerator

Comparing decimals

Method. Line up the decimal points, annex zeros, and compare place by place from the left.

Worked example. Which decimal is the greatest: 0.6, 0.61, 0.508, or 0.098?

  • (A) 0.508
  • (B) 0.098
  • (C) 0.6
  • (D) 0.61
AnswerD — 0.61
Step-by-step
  1. Write each number to thousandths: 0.600, 0.610, 0.508, 0.098.
  2. Compare the tenths: 6, 6, 5, 0. So 0.6 and 0.61 are the largest two.
  3. Compare the hundredths of those two: 0.61 has 1 and 0.6 has 0, so 0.61 is greatest.
Fast methodAnnex zeros so every decimal has the same number of places, then compare like whole numbers.
Quick checkCheck: 610 thousandths > 600 thousandths > 508 thousandths > 98 thousandths ✓.
Why the other choices are wrong
  • A (0.508): compared the digits after the decimal point as whole numbers (508 > 61)
  • B (0.098): chose the number with the greatest single digit (9)
  • C (0.6): thought the decimal with fewer digits is greater

Comparing fractions and decimals

Method. Rename every number in the same form (here, hundredths), then compare.

Worked example. Four students ran on a track. Jo ran 3/5 mile, Kai ran 0.65 mile, Lu ran 0.58 mile, and Mo ran 1/2 mile. Who ran the farthest?

  • (A) Jo
  • (B) Kai
  • (C) Mo
  • (D) Lu
AnswerB — Kai
Step-by-step
  1. Change the fractions to decimals: 3/5 = 6/10 = 0.6 and 1/2 = 5/10 = 0.5.
  2. Now compare 0.6, 0.65, 0.58 and 0.5 in hundredths: 60, 65, 58 and 50.
  3. 65 hundredths is the most, so Kai ran the farthest.
Fast methodWrite every distance in hundredths: 60, 65, 58, 50.
Quick checkCheck: 0.65 − 0.6 = 0.05 > 0, so Kai ran farther than Jo ✓.
Why the other choices are wrong
  • A (Jo): read 3/5 as 3.5
  • C (Mo): read 1/2 as 1.2
  • D (Lu): compared the hundredths digits first (8 > 5)

Whole-Number Computation (4.CE.1, 4.CE.2)

Add and subtract whole numbers with addends and minuends up to 10,000, and solve word problems with numbers up to 1,000,000. Estimate by rounding each number first. Know the multiplication facts through 12 × 12. Multiply 2-digit × 1-digit, 3-digit × 1-digit and 2-digit × 2-digit numbers, and divide 2- or 3-digit numbers by a 1-digit divisor, with or without a remainder. Find factor pairs of numbers 1–100 and the greatest common factor (GCF) of up to three numbers. In word problems, decide what a remainder means: add one more group, drop it, or report it. Traps: regrouping across zeros, forgetting the zero in the tens partial product, a remainder larger than the divisor, and giving the remainder or the per-group amount when the question asks for something else. Computing sums and differences (4.CE.1b–c), the facts (4.CE.2b), products (4.CE.2g) and quotients (4.CE.2i) has no calculator; word problems, estimation, factors and GCF are calculator-active.

Key formulas
Addition and subtraction undo each othera+b=c ⟺ c−b=aa+b=c\ \Longleftrightarrow\ c-b=a
Partial products(10×t+u)×m=10×t×m+u×m(10\times t+u)\times m=10\times t\times m+u\times m
Division checkdividend=divisor×quotient+remainder,remainder<divisor\text{dividend}=\text{divisor}\times\text{quotient}+\text{remainder},\quad \text{remainder}<\text{divisor}
Factor paira×b=n ⇒ a and b are a factor pair of na\times b=n\ \Rightarrow\ a\text{ and }b\text{ are a factor pair of }n
Greatest common factorGCF=the greatest factor shared by every number\text{GCF}=\text{the greatest factor shared by every number}

Subtracting across zeros

Method. Regroup across zeros from the first nonzero place; each zero you pass becomes 9.

Worked example. What is 8,003 − 4,756?

  • (A) 3,247
  • (B) 3,357
  • (C) 4,753
  • (D) 12,759
AnswerA — 3,247
Step-by-step
  1. 8,003 has no tens or hundreds to regroup, so regroup 1 thousand: 8,003 = 7 thousands + 9 hundreds + 9 tens + 13 ones.
  2. Subtract each place: 13 − 6 = 7, 9 − 5 = 4, 9 − 7 = 2, 7 − 4 = 3.
  3. 8,003 − 4,756 = 3,247.
Fast methodThink of 8,003 as 7,999 + 4: 7,999 − 4,756 = 3,243, then add 4 to get 3,247.
Quick checkCheck: 3,247 + 4,756 = 8,003 ✓.
Why the other choices are wrong
  • B (3,357): regrouped each zero as 10 without reducing it to 9
  • C (4,753): subtracted the smaller digit from the larger digit in each place
  • D (12,759): added instead of subtracting

Multiplying two-digit numbers

Method. Multiply by the ones, multiply by the tens, then add the partial products.

Worked example. What is 47 × 36?

  • (A) 423
  • (B) 1,692
  • (C) 1,242
  • (D) 1,452
AnswerB — 1,692
Step-by-step
  1. Break 36 into 30 + 6.
  2. 47 × 6 = 282 and 47 × 30 = 1,410.
  3. Add the partial products: 282 + 1,410 = 1,692.
Fast methodUse an area model: 40 × 30 = 1,200, 40 × 6 = 240, 7 × 30 = 210, 7 × 6 = 42; total 1,692.
Quick checkCheck: estimate 50 × 36 = 1,800, and 1,692 is a little less ✓.
Why the other choices are wrong
  • A (423): forgot that the 3 in 36 means 3 tens: 47 × 6 + 47 × 3 = 282 + 141
  • C (1,242): multiplied tens by tens and ones by ones only: 40 × 30 + 7 × 6
  • D (1,452): forgot to add the regrouped digits in each partial product

Interpreting a remainder

Method. Divide, then read the question to decide whether the remainder adds one more group, is dropped, or is the answer.

Worked example. There are 130 students going on a field trip. Each van holds 8 students. What is the least number of vans needed so that every student has a seat?

  • (A) 16
  • (B) 2
  • (C) 16 R 2
  • (D) 17
AnswerD — 17
Step-by-step
  1. Divide: 130 ÷ 8 = 16 R 2.
  2. 16 vans hold 16 × 8 = 128 students, so 2 students still need a seat.
  3. One more van is needed: 16 + 1 = 17 vans.
Fast methodWhen every person needs a seat, a remainder means one more group.
Quick checkCheck: 17 × 8 = 136 seats ≥ 130, and 16 × 8 = 128 < 130 ✓.
Why the other choices are wrong
  • A (16): dropped the remainder and left 2 students without a seat
  • B (2): gave the remainder instead of the number of vans
  • C (16 R 2): did not decide what the remainder means in the problem

Adding and Subtracting Fractions and Decimals (4.CE.3, 4.CE.4)

Add and subtract fractions and mixed numbers with like denominators of 2, 3, 4, 5, 6, 8, 10 or 12, and write the answer in simplest form. When the fraction part of a sum is improper, regroup it into a whole; when you cannot subtract the fraction part, regroup 1 whole as d/d. Multiply a whole number of 12 or less by a unit fraction: n × 1/d = n/d. Add and subtract decimals through thousandths by lining up the decimal points and annexing zeros. Traps: adding the denominators, regrouping 1 whole as 10 parts when the parts are not tenths, lining up the last digits instead of the decimal points, and stopping after the first step of a two-step problem. Computing like-denominator sums and differences (4.CE.3a), whole number × unit fraction (4.CE.3c) and decimal sums and differences (4.CE.4a) has no calculator; word problems are calculator-active.

Key formulas
Like denominatorsad+bd=a+bd,ad−bd=a−bd\frac{a}{d}+\frac{b}{d}=\frac{a+b}{d},\qquad \frac{a}{d}-\frac{b}{d}=\frac{a-b}{d}
One whole1=dd1=\frac{d}{d}
Whole number times a unit fractionn×1d=ndn\times\frac{1}{d}=\frac{n}{d}
Simplest formdivide numerator and denominator by their GCF\text{divide numerator and denominator by their GCF}
Line up decimal points1.4+0.27=1.40+0.27=1.671.4+0.27=1.40+0.27=1.67

Whole number times a unit fraction

Method. n × 1/d = n/d; rename an improper fraction as a mixed number if needed.

Worked example. What is 7 × 1/3?

  • (A) 1/3
  • (B) 1/21
  • (C) 2 2/3
  • (D) 2 1/3
AnswerD — 2 1/3
Step-by-step
  1. 7 × 1/3 means 7 groups of 1/3: 1/3 + 1/3 + 1/3 + 1/3 + 1/3 + 1/3 + 1/3 = 7/3.
  2. 7/3 = 3/3 + 3/3 + 1/3 = 2 1/3.
Fast methodMultiply the whole number by the numerator 1 and keep the denominator: 7/3.
Quick checkCheck: 2 1/3 is between 2 and 3, and 7 thirds is a bit more than 6 thirds (2) ✓.
Why the other choices are wrong
  • A (1/3): multiplied both the numerator and the denominator by 7 (7/21)
  • B (1/21): multiplied the denominator by 7
  • C (2 2/3): added 7 + 1 to get the numerator

Adding mixed numbers with regrouping

Method. Add whole numbers and fractions separately, regroup an improper fraction into a whole, then simplify.

Worked example. What is 3 5/8 + 2 7/8? Write the sum in simplest form.

  • (A) 5 1/2
  • (B) 5 3/4
  • (C) 6 1/2
  • (D) 6 1/4
AnswerC — 6 1/2
Step-by-step
  1. Add the whole numbers: 3 + 2 = 5. Add the fractions: 5/8 + 7/8 = 12/8.
  2. 12/8 = 8/8 + 4/8 = 1 4/8, so the sum is 5 + 1 4/8 = 6 4/8.
  3. Simplify: 4/8 = 1/2, so the sum is 6 1/2.
Fast methodChange to eighths: 29/8 + 23/8 = 52/8 = 6 4/8 = 6 1/2.
Quick checkCheck: 6 1/2 − 2 7/8 = 3 5/8 ✓.
Why the other choices are wrong
  • A (5 1/2): added the fractions to get 12/8 = 1 4/8 but did not add the 1 to the whole numbers
  • B (5 3/4): added the denominators: 5 + 12/16
  • D (6 1/4): thought 10 eighths make a whole and regrouped 12/8 as 1 2/8

Decimal difference in context

Method. Order the decimals, choose the right two, then subtract with the decimal points lined up.

Worked example. Ty made three long jumps: 3.45 meters, 3.8 meters, and 3.507 meters. How much longer was his longest jump than his shortest jump?

  • (A) 0.057 meter
  • (B) 0.293 meter
  • (C) 0.35 meter
  • (D) 0.45 meter
AnswerC — 0.35 meter
Step-by-step
  1. Write each length to thousandths: 3.450, 3.800, 3.507. Longest: 3.8. Shortest: 3.45.
  2. Subtract: 3.80 − 3.45 = 0.35.
  3. The longest jump was 0.35 meter longer.
Fast methodOrder first, then subtract with the decimal points lined up.
Quick checkCheck: 3.45 + 0.35 = 3.80 ✓.
Why the other choices are wrong
  • A (0.057 meter): thought 3.507 was the longest jump because 507 > 8, then found 3.507 − 3.45
  • B (0.293 meter): used 3.507 as the shortest jump and found 3.8 − 3.507
  • D (0.45 meter): subtracted the smaller digit from the larger digit in each place of 3.80 and 3.45

02.02 Measurement, Geometry, Statistics and Patterns (Grade 4)

This topic covers the Grade 4 Virginia SOL standards for measurement and geometry (4.MG.1–4.MG.6: choosing units, measuring to the nearest ½, ¼ or ⅛ inch, U.S. Customary conversions, elapsed time across a.m. and p.m., area and perimeter of rectangles and squares, points, lines, rays and angles, quadrilaterals, and solid figures) and for probability, statistics and patterns (4.PS.1 line graphs, 4.PS.2 simple probability, 4.PFA.1 patterns and input/output tables), which make up about 42% of the test. The Grade 4 SOL math test is online and computer adaptive, with 36 scored questions plus field-test and off-grade questions (multiple choice and technology-enhanced); it is untimed, and you must answer each question in order without going back (the 50-minute target for 20 questions here is a practice target, not a real limit). No skill in this topic is a no-calculator skill, so every question here allows the Desmos four-function calculator; there is no formula sheet in grade 4, so any conversion fact or formula you need is given in the question, and the score scale is 0–600 (400 to pass in 2025–26, with higher cut scores and an Approaching level phased in from 2026–27).

Measuring, Converting Units and Elapsed Time

Choose a unit that fits the size of the object: inches, feet, yards or miles for length; ounces or pounds for weight; cups, pints, quarts or gallons for liquid volume. A ruler marked in eighths of an inch lets you measure to the nearest half, fourth or eighth of an inch: count the marks after the last whole inch. Grade 4 converts only inside the U.S. Customary system, and the test gives you the one fact you need (such as 1 foot = 12 inches). Going from a bigger unit to a smaller unit, multiply; a common trap is adding the two numbers instead. For elapsed time, count up to the next hour, then whole hours, then the leftover minutes; remember that the clock changes from a.m. to p.m. at 12:00 noon and from p.m. to a.m. at 12:00 midnight.

Key formulas
Length facts1 ft=12 in.,1 yd=3 ft=36 in.1\text{ ft}=12\text{ in.},\quad 1\text{ yd}=3\text{ ft}=36\text{ in.}
Weight fact1 lb=16 oz1\text{ lb}=16\text{ oz}
Liquid volume facts1 gal=4 qt,1 qt=2 pt,1 pt=2 c1\text{ gal}=4\text{ qt},\quad 1\text{ qt}=2\text{ pt},\quad 1\text{ pt}=2\text{ c}
Bigger unit to smaller unitnumber of small units=number of big units×(small units in one big unit)\text{number of small units}=\text{number of big units}\times\text{(small units in one big unit)}
Eighths on a ruler28=14,48=12,68=34\tfrac{2}{8}=\tfrac{1}{4},\quad \tfrac{4}{8}=\tfrac{1}{2},\quad \tfrac{6}{8}=\tfrac{3}{4}
Elapsed timeelapsed time=(minutes to the next hour)+(whole hours)+(extra minutes)\text{elapsed time}=\text{(minutes to the next hour)}+\text{(whole hours)}+\text{(extra minutes)}

Choosing a unit of liquid volume

Method. Match the size of the unit to the size of what you are measuring.

Worked example. Mr. Patel wants to measure how much water it takes to fill a bathtub. Which unit is the best choice?

  • (A) cups
  • (B) pints
  • (C) gallons
  • (D) pounds
AnswerC — gallons
Step-by-step
  1. A bathtub holds a large amount of water.
  2. Gallons are the largest customary unit of liquid volume, so gallons is the best choice.
Fast methodBig container, big unit: gallons.
Quick checkCheck: a milk jug holds 1 gallon, and a bathtub holds many jugs of water ✓.
Why the other choices are wrong
  • A (cups): chose the smallest unit of liquid volume, which is far too small for a bathtub
  • B (pints): chose a small unit of liquid volume that fits a glass, not a bathtub
  • D (pounds): chose a unit of weight instead of a unit of liquid volume

Converting feet to inches

Method. To change a bigger unit to a smaller unit, multiply by the number of small units in one big unit.

Worked example. A wooden board is 7 feet long. 1 foot = 12 inches. How long is the board in inches?

  • (A) 19 inches
  • (B) 84 inches
  • (C) 21 inches
  • (D) 70 inches
AnswerB — 84 inches
Step-by-step
  1. Feet are bigger than inches, so multiply.
  2. 7 × 12 = 84, so the board is 84 inches long.
Fast methodEach foot is 12 inches: 7 groups of 12.
Quick checkCheck: 84 ÷ 12 = 7 feet ✓.
Why the other choices are wrong
  • A (19 inches): added 7 + 12 instead of multiplying
  • C (21 inches): multiplied by 3, the number of feet in a yard
  • D (70 inches): multiplied 7 by 10 instead of by 12

Elapsed time across noon

Method. Break elapsed time into parts: up to the hour, whole hours, then minutes.

Worked example. A bakery opens at 9:45 a.m. and closes at 4:20 p.m. on the same day. How long is the bakery open?

  • (A) 6 hours 35 minutes
  • (B) 5 hours 25 minutes
  • (C) 7 hours 35 minutes
  • (D) 6 hours 20 minutes
AnswerA — 6 hours 35 minutes
Step-by-step
  1. From 9:45 a.m. to 10:00 a.m. is 15 minutes.
  2. From 10:00 a.m. to 4:00 p.m. is 6 hours (2 hours to noon, then 4 more hours).
  3. From 4:00 p.m. to 4:20 p.m. is 20 minutes.
  4. Total: 6 hours and 15 + 20 = 35 minutes.
Fast methodJump to the next hour, jump the whole hours, then add the minutes.
Quick checkCheck: 9:45 a.m. + 6 hours = 3:45 p.m.; 3:45 p.m. + 35 minutes = 4:20 p.m. ✓.
Why the other choices are wrong
  • B (5 hours 25 minutes): subtracted 4:20 from 9:45 as if both were in the same half of the day
  • C (7 hours 35 minutes): counted the hour marks 10, 11, 12, 1, 2, 3, 4 as 7 hours instead of 6
  • D (6 hours 20 minutes): forgot the 15 minutes from 9:45 a.m. to 10:00 a.m.

Area and Perimeter of Rectangles and Squares

Perimeter is the distance around a figure: add all four side lengths, so it is measured in units such as feet. Area is the number of square units that cover the inside: multiply length by width, so it is measured in square units such as square feet. A square has four equal sides. In grade 4 every shape is a rectangle or a square with whole-number sides. Common traps: giving the perimeter when the question asks for area (or the other way around), and adding only two sides for the perimeter. Two rectangles can have the same perimeter but different areas, or the same area but different perimeters.

Key formulas
Perimeter of a rectangleP=l+w+l+w=2×l+2×wP=l+w+l+w=2\times l+2\times w
Area of a rectangleA=l×wA=l\times w
Perimeter of a squareP=4×sP=4\times s
Area of a squareA=s×sA=s\times s
Missing side from the areaw=A÷lw=A\div l

Area of a rectangle

Method. Area of a rectangle is length times width, in square units.

Worked example. A rectangular rug is 9 feet long and 4 feet wide. What is the area of the rug?

  • (A) 13 square feet
  • (B) 26 square feet
  • (C) 72 square feet
  • (D) 36 square feet
AnswerD — 36 square feet
Step-by-step
  1. Area of a rectangle = length × width.
  2. 9 × 4 = 36, so the area is 36 square feet.
Fast methodArea: multiply the two side lengths.
Quick checkCheck: 4 rows of 9 squares is 9 + 9 + 9 + 9 = 36 squares ✓.
Why the other choices are wrong
  • A (13 square feet): added the length and the width
  • B (26 square feet): found the perimeter instead of the area
  • C (72 square feet): multiplied the length and width and then doubled it

Perimeter of a square

Method. Perimeter of a square is 4 times the side length.

Worked example. A square garden has sides that are each 14 yards long. What is the perimeter of the garden?

  • (A) 56 yards
  • (B) 196 yards
  • (C) 28 yards
  • (D) 18 yards
AnswerA — 56 yards
Step-by-step
  1. A square has 4 equal sides.
  2. Perimeter = 4 × 14 = 56 yards.
Fast methodFour equal sides: 4 × side.
Quick checkCheck: 14 + 14 + 14 + 14 = 56 ✓.
Why the other choices are wrong
  • B (196 yards): found the area, 14 × 14, instead of the perimeter
  • C (28 yards): added only two sides
  • D (18 yards): added 4 to the side length instead of multiplying by 4

Area from the perimeter and one side

Method. Use the perimeter to find the missing side first, then find the area.

Worked example. A rectangular patio has a perimeter of 30 feet. Its length is 9 feet. What is the area of the patio?

  • (A) 189 square feet
  • (B) 108 square feet
  • (C) 54 square feet
  • (D) 6 square feet
AnswerC — 54 square feet
Step-by-step
  1. The two lengths use 9 + 9 = 18 feet of the perimeter.
  2. The two widths use 30 − 18 = 12 feet, so each width is 12 ÷ 2 = 6 feet.
  3. Area = 9 × 6 = 54 square feet.
Fast methodTake away both lengths, halve what is left to get the width, then multiply.
Quick checkCheck: 9 + 6 + 9 + 6 = 30 feet ✓ and 9 × 6 = 54 ✓.
Why the other choices are wrong
  • A (189 square feet): subtracted only one length, 30 − 9 = 21, and multiplied 21 × 9
  • B (108 square feet): subtracted both lengths, 30 − 18 = 12, but forgot to split 12 between the two widths
  • D (6 square feet): found the width but stopped before finding the area

Lines, Angles, Quadrilaterals and Solid Figures

A line goes on forever in both directions, a ray has one endpoint and goes on forever in one direction, and a segment has two endpoints. Ray PQ starts at P, so the order of the letters matters for a ray. An angle is two rays that share an endpoint, called the vertex. Parallel lines never meet; intersecting lines cross at one point; perpendicular lines cross to make square corners (right angles). Quadrilaterals are sorted by their sides and angles: a parallelogram has two pairs of parallel sides; a rectangle is a parallelogram with four right angles; a rhombus is a parallelogram with four congruent sides; a square has four congruent sides and four right angles, so every square is also a rectangle and a rhombus; a trapezoid has exactly one pair of parallel sides, so a parallelogram is not a trapezoid. On drawings, matching tick marks show congruent sides, arrow marks show parallel sides and a small square shows a right angle. For solid figures, know the faces, edges and vertices of the cube, rectangular prism and square pyramid; a sphere has no faces, edges or vertices. You should also recognize a cone and a cylinder by their curved surfaces and circular bases.

Key formulas
Line, ray, segmentAB↔ (line),AB→ (ray),AB‾ (segment)\overleftrightarrow{AB}\ \text{(line)},\quad \overrightarrow{AB}\ \text{(ray)},\quad \overline{AB}\ \text{(segment)}
Parallel and perpendicularm∥n (never meet),m⊥n (meet at right angles)m\parallel n\ \text{(never meet)},\quad m\perp n\ \text{(meet at right angles)}
Naming an angle∠ABC has vertex B\angle ABC\ \text{has vertex } B
Cube and rectangular prism6 faces, 12 edges, 8 vertices6\text{ faces},\ 12\text{ edges},\ 8\text{ vertices}
Square pyramid5 faces, 8 edges, 5 vertices5\text{ faces},\ 8\text{ edges},\ 5\text{ vertices}
Square in the family of quadrilateralssquare⊂rectangle⊂parallelogram\text{square}\subset\text{rectangle}\subset\text{parallelogram}

Naming a ray

Method. Name a ray with its endpoint first, then a point it passes through.

Worked example. A ray begins at point P and goes on forever through point Q. What is the name of this ray?

  • (A) ray QP
  • (B) ray PQ
  • (C) segment PQ
  • (D) line PQ
AnswerB — ray PQ
Step-by-step
  1. A ray is named by its endpoint first, then another point on the ray.
  2. The endpoint is P and the ray passes through Q, so it is ray PQ.
Fast methodEndpoint first.
Quick checkCheck: ray PQ starts at P and goes past Q forever ✓.
Why the other choices are wrong
  • A (ray QP): wrote the letters in the wrong order; a ray is named starting with its endpoint
  • C (segment PQ): named a segment, which stops at Q instead of going on forever
  • D (line PQ): named a line, which goes on forever in both directions

Classifying a quadrilateral

Method. Check sides first (parallel, congruent), then angles (right or not).

Worked example. A quadrilateral has two pairs of parallel sides and four congruent sides. None of its angles is a right angle. Which name describes this quadrilateral?

  • (A) square
  • (B) rectangle
  • (C) trapezoid
  • (D) rhombus
AnswerD — rhombus
Step-by-step
  1. Two pairs of parallel sides make it a parallelogram.
  2. Four congruent sides make it a rhombus.
  3. It has no right angles, so it cannot be a square or a rectangle.
Fast methodEqual sides, no square corners: rhombus.
Quick checkCheck: a rhombus is a parallelogram with four congruent sides, and it does not need right angles ✓.
Why the other choices are wrong
  • A (square): forgot that a square must have four right angles
  • B (rectangle): forgot that a rectangle must have four right angles
  • C (trapezoid): looked only at the parallel sides and missed the four congruent sides

Counting vertices of solid figures

Method. Find the count for one figure of each kind, multiply by how many there are, then add.

Worked example. Leo builds a model from 2 cubes and 1 square pyramid. The figures are separate and do not touch. What is the total number of vertices on the 3 figures?

  • (A) 21
  • (B) 20
  • (C) 17
  • (D) 29
AnswerA — 21
Step-by-step
  1. A cube has 8 vertices, so 2 cubes have 2 × 8 = 16 vertices.
  2. A square pyramid has 4 vertices on its base and 1 at the top: 5 vertices.
  3. Total: 16 + 5 = 21 vertices.
Fast methodCube 8 each, square pyramid 5, then add.
Quick checkCheck: 8 + 8 + 5 = 21 ✓.
Why the other choices are wrong
  • B (20): counted only the 4 corners of the pyramid's base and forgot the top vertex
  • C (17): used 6, the number of faces of a cube, instead of the number of vertices
  • D (29): used 12, the number of edges of a cube, instead of the number of vertices

Line Graphs, Probability and Patterns

A line graph shows how data change over time. Read each point carefully, then subtract to find how much a value went up or down between two times; a steeper piece of the line means a bigger change. On the test the graph is shown; here its points are listed in words. The probability of an event is a fraction from 0 to 1: favorable outcomes over all possible outcomes when the outcomes are equally likely. A probability of 0 means impossible, 1 means certain, and 1/2 means equally likely; closer to 1 is likely and closer to 0 is unlikely. A common trap is putting the favorable outcomes over the other outcomes instead of over all outcomes. Grade 4 patterns grow or shrink by adding, subtracting or multiplying whole numbers. In an input/output table, test your rule on every pair, not just the first one.

Key formulas
Probability of an eventP(event)=number of favorable outcomesnumber of possible outcomesP(\text{event})=\dfrac{\text{number of favorable outcomes}}{\text{number of possible outcomes}}
Range of probability0≤P(event)≤10\le P(\text{event})\le 1
Change on a line graphchange=later value−earlier value\text{change}=\text{later value}-\text{earlier value}
Adding patternnext term=term+rule\text{next term}=\text{term}+\text{rule}
Multiplying patternnext term=term×rule\text{next term}=\text{term}\times\text{rule}

Probability of a simple event

Method. Probability = favorable outcomes ÷ total outcomes, written as a fraction.

Worked example. A bag has 3 red marbles, 5 blue marbles and 4 green marbles, all the same size. Kim picks one marble without looking. What is the probability that the marble is blue?

  • (A) 5/7
  • (B) 1/3
  • (C) 5/12
  • (D) 7/12
AnswerC — 5/12
Step-by-step
  1. Total marbles: 3 + 5 + 4 = 12.
  2. Blue marbles: 5.
  3. Probability of blue = 5/12.
Fast methodFavorable over total.
Quick checkCheck: 5/12 is less than 1/2 because fewer than half of the 12 marbles are blue ✓.
Why the other choices are wrong
  • A (5/7): put the blue marbles over the marbles that are not blue
  • B (1/3): used 1 out of 3 colors instead of counting marbles
  • D (7/12): found the probability of not picking blue

Reading change on a line graph

Method. On a line graph, subtract neighboring values to compare the changes.

Worked example. A line graph shows the number of students in an after-school club each month. September: 9, October: 13, November: 18, December: 20, January: 26. Between which two months did the number of students increase the least?

  • (A) September to October
  • (B) November to December
  • (C) December to January
  • (D) October to November
AnswerB — November to December
Step-by-step
  1. Find each change: 13 − 9 = 4, 18 − 13 = 5, 20 − 18 = 2, 26 − 20 = 6.
  2. The least increase is 2, from November to December.
Fast methodSubtract each pair of neighbors and look for the smallest change.
Quick checkCheck: the changes 4, 5, 2, 6 add to 17, and 26 − 9 = 17 ✓.
Why the other choices are wrong
  • A (September to October): chose the first pair of months instead of comparing every change
  • C (December to January): chose the greatest increase instead of the least
  • D (October to November): compared the numbers of students instead of the changes

Finding and using an input/output rule

Method. A rule must work for every pair in the table before you use it.

Worked example. An input/output table has these pairs: input 2, output 8; input 4, output 16; input 7, output 28. The same rule works for every pair. What is the output when the input is 11?

  • (A) 44
  • (B) 17
  • (C) 40
  • (D) 88
AnswerA — 44
Step-by-step
  1. Try add 6: 2 + 6 = 8, but 4 + 6 = 10, not 16, so add 6 does not work.
  2. Try multiply by 4: 2 × 4 = 8, 4 × 4 = 16, 7 × 4 = 28. It works for every pair.
  3. Output for 11: 11 × 4 = 44.
Fast methodTest the rule on every pair, then use it.
Quick checkCheck: 44 ÷ 4 = 11 ✓.
Why the other choices are wrong
  • B (17): used the rule add 6, which works only for the first pair
  • C (40): added 12 to 28 because the outputs went up by 8 and then by 12
  • D (88): multiplied by 8, using the first output as the rule