Virginia SOL Mathematics · Math · Grade 5

Grade 5: Study Guide

Grade 5 mathematics on the Virginia Standards of Learning (SOL) test, built on the 2023 Mathematics SOL and VDOE's 2023 test blueprint. The real test is an untimed online adaptive test with 36 scored questions, a four-function calculator on most questions (some questions are no-calculator), and no formula sheet. A scaled score of 400 is proficient. Some real questions are technology-enhanced (drag and drop, multiple select, hot spot); here those skills appear as questions with one final answer, and the timer is a practice target.

03.01 Number Sense and Computation (Grade 5)

This topic covers Virginia's 2023 grade 5 Number and Number Sense and Computation and Estimation standards: changing between fractions and decimals and comparing and ordering them (5.NS.1), prime and composite numbers and prime factorization (5.NS.2), whole-number computation (5.CE.1), adding and subtracting fractions and multiplying a whole number by a fraction (5.CE.2), multiplying and dividing decimals (5.CE.3) and the order of operations (5.CE.4). The grade 5 SOL Mathematics test is taken online, is computer adaptive and untimed, and has 36 scored questions plus field-test and off-grade questions (47 in all); you answer every question in order and cannot go back, and questions are multiple choice or technology-enhanced. Starred skills (5.NS.1, 5.CE.2b and d, 5.CE.3b and c, 5.CE.4) are tested with no calculator, the Desmos four-function calculator is available on the other questions, no grade 5 formula sheet has been found (VDOE posts sheets only for middle school and the end-of-course tests), so any formula you need is given in the question, and scores run from 0 to 600 (400 passes in 2025–26, with higher phased-in cut scores and an Approaching level from 2026–27).

Fractions and Decimals: Equivalence, Comparing and Ordering (5.NS.1)

A fraction is a division: the numerator divided by the denominator. In grade 5 you change fractions with denominators of thirds, eighths or factors of 100 (2, 4, 5, 10, 20, 25, 50, 100) into decimals, and decimals back into fractions. To compare or order up to four numbers (decimals through thousandths, fractions and mixed numbers with denominators 12 or less), write them all in the same form, then line up the place values. Common traps: a decimal with more digits is not always greater (0.4 is greater than 0.39), an improper fraction is greater than 1, and the digits of a fraction cannot be copied into a decimal (9/25 is 0.36, not 0.925). These skills are starred: on the real test they are answered without a calculator.

Key formulas
A fraction is a divisionab=a÷b\frac{a}{b}=a\div b
Denominators that are factors of 100750=14100=0.14,1125=44100=0.44\frac{7}{50}=\frac{14}{100}=0.14,\qquad \frac{11}{25}=\frac{44}{100}=0.44
Eighths18=0.125,  so  n8=n×0.125\frac{1}{8}=0.125,\ \text{ so }\ \frac{n}{8}=n\times0.125
Thirds (repeating decimals)n3=n÷3: the digit after the point repeats forever\frac{n}{3}=n\div3:\ \text{the digit after the point repeats forever}
Compare by lining up place values0.4=0.400>0.390=0.390.4=0.400>0.390=0.39

Fraction to decimal

Method. To change a fraction to a decimal, rename it with a denominator of 10, 100 or 1,000, or divide the numerator by the denominator.

Worked example. Which decimal is equal to 3/5?

  • (A) 0.35
  • (B) 0.6
  • (C) 3.5
  • (D) 0.53
AnswerB — 0.6
Step-by-step
  1. Rename 3/5 with denominator 10: 3/5 = (3 × 2)/(5 × 2) = 6/10.
  2. 6/10 is 6 tenths, which is 0.6.
Fast method5 is a factor of 10, so multiply the top and bottom by 2 to get tenths.
Quick checkCheck: 0.6 = 6/10 = 3/5 ✓.
Why the other choices are wrong
  • A (0.35): wrote the digits 3 and 5 after the decimal point (0.35)
  • C (3.5): divided 3 into 5 wrong and placed the decimal point after the 3 (3.5)
  • D (0.53): wrote the denominator then the numerator after the decimal point (0.53)

Decimal to fraction

Method. Write the decimal over 10, 100 or 1,000 by its last place value, then simplify.

Worked example. Which fraction is equal to 0.875?

  • (A) 7/8
  • (B) 875/100
  • (C) 87/100
  • (D) 8/7
AnswerA — 7/8
Step-by-step
  1. 0.875 is 875 thousandths, so 0.875 = 875/1,000.
  2. Divide the numerator and denominator by 125: 875 ÷ 125 = 7 and 1,000 ÷ 125 = 8.
  3. So 0.875 = 7/8.
Fast methodKnow the eighths: 1/8 = 0.125, so 7/8 = 7 × 0.125 = 0.875.
Quick checkCheck: 7 ÷ 8 = 0.875 ✓.
Why the other choices are wrong
  • B (875/100): used 100 as the denominator for a number in thousandths (875/100 = 8.75)
  • C (87/100): dropped the thousandths digit (87/100 = 0.87)
  • D (8/7): wrote the fraction upside down (8/7 is greater than 1)

Ordering fractions and decimals

Method. To order fractions and decimals, write them all as decimals to the same place, then compare place by place.

Worked example. Which list shows 2/3, 0.6, 0.67 and 5/8 in order from least to greatest?

  • (A) 0.6, 5/8, 0.67, 2/3
  • (B) 5/8, 0.6, 2/3, 0.67
  • (C) 0.6, 5/8, 2/3, 0.67
  • (D) 0.67, 2/3, 5/8, 0.6
AnswerC — 0.6, 5/8, 2/3, 0.67
Step-by-step
  1. Write each number as a decimal to thousandths: 2/3 = 0.666…, 0.6 = 0.600, 0.67 = 0.670, 5/8 = 0.625.
  2. Compare: 0.600 < 0.625 < 0.666… < 0.670.
  3. So the order is 0.6, 5/8, 2/3, 0.67.
Fast methodChange every number to thousandths, then compare like whole numbers: 600, 625, 666, 670.
Quick checkCheck: 2/3 = 0.666… is less than 0.67 because 0.666… < 0.670 ✓.
Why the other choices are wrong
  • A (0.6, 5/8, 0.67, 2/3): rounded 2/3 up to 0.7, so placed it last
  • B (5/8, 0.6, 2/3, 0.67): thought 5/8 = 0.58 by joining its digits, so placed it first
  • D (0.67, 2/3, 5/8, 0.6): listed the numbers from greatest to least

Prime Numbers and Whole-Number Computation (5.NS.2, 5.CE.1)

A prime number has exactly two factors, 1 and itself. A composite number has more than two factors. The number 1 is neither prime nor composite, and 2 is the only even prime. Prime factorization writes a whole number up to 100 as a product of primes only; write each repeated factor again (12 = 2 × 2 × 3), not with exponents. For whole-number problems, products have up to five digits, divisors up to two digits and dividends up to four digits. In a division word problem, decide what the remainder means: drop it (full groups), round up (one more group is needed), or give the remainder itself (what is left over). A calculator may be used for these items.

Key formulas
Prime and compositeprime: exactly 2 factors;composite: more than 2 factors\text{prime: exactly 2 factors};\quad \text{composite: more than 2 factors}
Prime factorization (no exponents)60=2×2×3×560=2\times2\times3\times5
Division with a remainderdividend=divisor×quotient+remainder\text{dividend}=\text{divisor}\times\text{quotient}+\text{remainder}
Example250÷16=15 R 10  because  16×15+10=250250\div 16=15\ \text{R}\ 10\ \text{ because }\ 16\times15+10=250

Identifying a prime number

Method. A prime number has exactly two factors: 1 and the number itself.

Worked example. Which number is prime?

  • (A) 39
  • (B) 51
  • (C) 57
  • (D) 41
AnswerD — 41
Step-by-step
  1. Check each number for factors other than 1 and itself.
  2. 39 = 3 × 13, 51 = 3 × 17 and 57 = 3 × 19, so they are composite.
  3. 41 has no factors other than 1 and 41, so 41 is prime.
Fast methodTest small primes 2, 3, 5 and 7; if none divides the number (for numbers below 100), it is prime.
Quick checkCheck: 41 ÷ 2, 41 ÷ 3, 41 ÷ 5 and 41 ÷ 7 all leave remainders ✓.
Why the other choices are wrong
  • A (39): thought every odd number is prime, but 39 = 3 × 13
  • B (51): missed that 51 = 3 × 17
  • C (57): missed that 57 = 3 × 19

Prime factorization

Method. Break the number into factors again and again until every factor is prime.

Worked example. Which shows the prime factorization of 84?

  • (A) 2 × 3 × 7
  • (B) 2 × 2 × 3 × 7
  • (C) 4 × 3 × 7
  • (D) 2 × 2 × 21
AnswerB — 2 × 2 × 3 × 7
Step-by-step
  1. Divide by primes: 84 = 2 × 42.
  2. 42 = 2 × 21 and 21 = 3 × 7.
  3. So 84 = 2 × 2 × 3 × 7, and every factor is prime.
Fast methodMake a factor tree and keep breaking until every branch ends in a prime.
Quick checkCheck: 2 × 2 × 3 × 7 = 4 × 21 = 84 ✓.
Why the other choices are wrong
  • A (2 × 3 × 7): left out one factor of 2 (2 × 3 × 7 = 42)
  • C (4 × 3 × 7): used 4, which is not prime
  • D (2 × 2 × 21): stopped at 21, which is not prime (21 = 3 × 7)

Interpreting a remainder

Method. When a remainder means some people still need a place, round the quotient up to the next whole number.

Worked example. A school is taking 438 students and 26 adults on a field trip. Each bus holds 52 people. What is the least number of buses needed so that everyone has a seat?

  • (A) 9
  • (B) 8
  • (C) 48
  • (D) 10
AnswerA — 9
Step-by-step
  1. Total people: 438 + 26 = 464.
  2. 464 ÷ 52 = 8 R 48, because 52 × 8 = 416 and 464 − 416 = 48.
  3. 8 buses leave 48 people without a seat, so 1 more bus is needed: 8 + 1 = 9 buses.
Fast methodDivide the total by 52; any remainder means one more bus.
Quick checkCheck: 9 × 52 = 468 seats, and 468 ≥ 464, but 8 × 52 = 416 < 464 ✓.
Why the other choices are wrong
  • B (8): dropped the remainder, leaving 48 people with no bus
  • C (48): gave the remainder instead of the number of buses
  • D (10): found buses for the students (9) and then added a separate bus for the adults

Adding and Subtracting Fractions; Whole Number Times a Fraction (5.CE.2)

To add or subtract fractions with unlike denominators (2, 3, 4, 5, 6, 8, 10, 12), use the least common multiple of the denominators as the least common denominator, rename each fraction, then add or subtract the numerators only. With mixed numbers, regroup 1 whole as a fraction when the fraction you subtract is larger. Always give the answer in simplest form. To multiply a whole number (12 or less) by a proper fraction, multiply the whole number by the numerator and divide by the denominator; in grade 5 the denominator is a factor of the whole number, so the answer is a whole number. Traps: never add the denominators, and never forget the extra whole when a sum of fractions is more than 1. Adding or subtracting two fractions or mixed numbers (5.CE.2b) and whole number times a fraction, including single-step word problems (5.CE.2d), are starred skills: no calculator. Single-step and multistep word problems that add and subtract fractions (5.CE.2c) come with the four-function calculator. Multiplying a whole number by a fraction is only tested as a single step.

Key formulas
Least common denominatorLCD of 16 and 38=LCM(6,8)=24\text{LCD of }\tfrac{1}{6}\text{ and }\tfrac{3}{8}=\text{LCM}(6,8)=24
Add with the LCD16+38=424+924=1324\frac{1}{6}+\frac{3}{8}=\frac{4}{24}+\frac{9}{24}=\frac{13}{24}
Regroup a whole515=4+55+15=4655\tfrac{1}{5}=4+\tfrac{5}{5}+\tfrac{1}{5}=4\tfrac{6}{5}
Whole number times a fractionn×ab=n×ab,10×25=205=4n\times\frac{a}{b}=\frac{n\times a}{b},\qquad 10\times\frac{2}{5}=\frac{20}{5}=4
Simplest form1012=10÷212÷2=56\frac{10}{12}=\frac{10\div2}{12\div2}=\frac{5}{6}

Least common denominator

Method. The least common denominator is the least common multiple of the denominators.

Worked example. What is the least common denominator of 1/4 and 5/6?

  • (A) 24
  • (B) 10
  • (C) 12
  • (D) 2
AnswerC — 12
Step-by-step
  1. List multiples of 6: 6, 12, 18, 24, …
  2. The first multiple of 6 that is also a multiple of 4 is 12.
  3. So the least common denominator is 12.
Fast methodList multiples of the larger denominator until one is divisible by the smaller.
Quick checkCheck: 12 ÷ 4 = 3 and 12 ÷ 6 = 2, both whole numbers ✓.
Why the other choices are wrong
  • A (24): multiplied the denominators (4 × 6 = 24), which is common but not least
  • B (10): added the denominators (4 + 6 = 10)
  • D (2): found the greatest common factor of 4 and 6 instead of the least common multiple

Adding mixed numbers

Method. Rename with the LCD, add wholes and fractions, then regroup and simplify.

Worked example. What is 2 3/8 + 1 5/6? Give the answer in simplest form.

  • (A) 3 4/7
  • (B) 3 5/24
  • (C) 3 7/12
  • (D) 4 5/24
AnswerD — 4 5/24
Step-by-step
  1. The LCD of 8 and 6 is 24: 3/8 = 9/24 and 5/6 = 20/24.
  2. Add the wholes: 2 + 1 = 3. Add the fractions: 9/24 + 20/24 = 29/24 = 1 5/24.
  3. 3 + 1 5/24 = 4 5/24.
Fast methodAdd wholes and fractions separately, then regroup a fraction greater than 1.
Quick checkCheck: 2 3/8 is about 2.4 and 1 5/6 is about 1.8; 2.4 + 1.8 = 4.2, and 4 5/24 is about 4.2 ✓.
Why the other choices are wrong
  • A (3 4/7): added the numerators and added the denominators (8/14 = 4/7)
  • B (3 5/24): found 29/24 but forgot to carry the extra whole
  • C (3 7/12): renamed 5/6 as 5/24 without multiplying the numerator

Multistep fraction subtraction in context

Method. In a multistep problem, use one common denominator for every fraction and regroup when needed.

Worked example. Maya has a ribbon that is 5 1/4 feet long. She cuts off 2 2/3 feet for a gift and then 1 1/6 feet for a bow. How many feet of ribbon are left?

  • (A) 2 7/12
  • (B) 1 5/12
  • (C) 9 1/12
  • (D) 2 1/4
AnswerB — 1 5/12
Step-by-step
  1. Use the LCD 12: 5 1/4 = 5 3/12, 2 2/3 = 2 8/12, 1 1/6 = 1 2/12.
  2. 5 3/12 = 4 15/12, so 4 15/12 − 2 8/12 = 2 7/12.
  3. 2 7/12 − 1 2/12 = 1 5/12 feet.
Fast methodAdd the two pieces first (2 8/12 + 1 2/12 = 3 10/12), then subtract once: 5 3/12 − 3 10/12 = 1 5/12.
Quick checkCheck: 1 5/12 + 3 10/12 = 4 15/12 = 5 3/12 = 5 1/4 ✓.
Why the other choices are wrong
  • A (2 7/12): subtracted only the first piece
  • C (9 1/12): added the two pieces to the ribbon instead of subtracting
  • D (2 1/4): subtracted the smaller fraction from the larger (2/3 − 1/4) instead of regrouping

Multiplying and Dividing Decimals; Order of Operations (5.CE.3, 5.CE.4)

When multiplying decimals, multiply as if they were whole numbers, then count the decimal places in both factors to place the decimal point (products go no further than thousandths). When dividing by a whole number, line the decimal point of the quotient up with the dividend; you may annex one zero to finish. When dividing by a tenth, multiply the divisor and dividend by 10 first so the divisor is a whole number. Order of operations: first work inside the one set of parentheses, then multiply and divide from left to right, then add and subtract from left to right. Expressions have at most five numbers and four operations, with no brackets or exponents. Bare computations and order of operations are starred (no calculator); decimal word problems allow the four-function calculator.

Key formulas
Decimal places in a product0.7×0.9=0.63(1+1=2 decimal places)0.7\times0.9=0.63\quad(1+1=2\text{ decimal places})
Divide by a tenth5.6÷0.7=56÷7=85.6\div0.7=56\div7=8
Annex one zero3.4÷4=3.40÷4=0.853.4\div4=3.40\div4=0.85
Order of operations(  ) → ×,÷ left to right → +,− left to right(\;)\ \rightarrow\ \times,\div\ \text{left to right}\ \rightarrow\ +,-\ \text{left to right}
Example11+(9−5)×2=11+4×2=11+8=1911+(9-5)\times2=11+4\times2=11+8=19

Decimal times a whole number

Method. Multiply the digits, then give the product as many decimal places as the factors have in all.

Worked example. What is 3.6 × 4?

  • (A) 14.4
  • (B) 1.44
  • (C) 144
  • (D) 12.24
AnswerA — 14.4
Step-by-step
  1. Multiply as whole numbers: 36 × 4 = 144.
  2. 3.6 has 1 decimal place, so the product has 1 decimal place: 14.4.
Fast methodEstimate: 3.6 is about 4, and 4 × 4 = 16, so the answer is near 14 or 16, not 1.44 or 144.
Quick checkCheck: 14.4 ÷ 4 = 3.6 ✓.
Why the other choices are wrong
  • B (1.44): placed the decimal point two places from the right
  • C (144): forgot the decimal point
  • D (12.24): multiplied 3 × 4 and 6 × 4 separately and wrote 12 and 24 side by side

Dividing by a tenth

Method. To divide by a tenth, multiply both numbers by 10 so the divisor is a whole number.

Worked example. What is 6.3 ÷ 0.7?

  • (A) 0.9
  • (B) 90
  • (C) 9
  • (D) 5.6
AnswerC — 9
Step-by-step
  1. Multiply the divisor and the dividend by 10: 6.3 ÷ 0.7 = 63 ÷ 7.
  2. 63 ÷ 7 = 9.
Fast methodThink: how many 7 tenths are in 63 tenths? 9.
Quick checkCheck: 9 × 0.7 = 6.3 ✓.
Why the other choices are wrong
  • A (0.9): divided by 7 instead of 0.7
  • B (90): moved the decimal point two places in the dividend but one place in the divisor (630 ÷ 7)
  • D (5.6): subtracted instead of dividing

Order of operations

Method. Work inside parentheses, then multiply and divide left to right, then add and subtract left to right.

Worked example. What is the value of 48 − 6 × (5 + 3) ÷ 4?

  • (A) 84
  • (B) 12
  • (C) 60
  • (D) 36
AnswerD — 36
Step-by-step
  1. Parentheses first: 5 + 3 = 8, so the expression is 48 − 6 × 8 ÷ 4.
  2. Multiply and divide from left to right: 6 × 8 = 48, then 48 ÷ 4 = 12.
  3. Subtract: 48 − 12 = 36.
Fast methodParentheses, then × and ÷ left to right, then + and − left to right.
Quick checkCheck: 48 − 12 = 36, and 12 = 6 × 8 ÷ 4 ✓.
Why the other choices are wrong
  • A (84): subtracted 48 − 6 first, then multiplied by 8 and divided by 4
  • B (12): found 6 × 8 ÷ 4 = 12 and forgot to subtract it from 48
  • C (60): added 12 to 48 instead of subtracting

03.02 Measurement, Geometry, Statistics and Patterns (Grade 5)

This topic covers the Virginia grade 5 Measurement and Geometry standards (5.MG.1–5.MG.3) and the Probability, Statistics, Patterns, Functions, and Algebra standards (5.PS.1–5.PS.3, 5.PFA.1–5.PFA.2), about half of the scored questions on the test. The Grade 5 Mathematics SOL test is online, computer adaptive and untimed: 36 scored questions plus field-test and extra questions (47 in all), multiple choice and technology-enhanced, answered in order with no going back to earlier questions. None of the skills in this topic is a starred no-calculator skill, so on the real test these questions come with the Desmos Virginia Four-Function calculator, and because no grade 5 formula sheet has been found (VDOE posts sheets only for middle school and the end-of-course tests), any formula or metric equivalence you need is given in the question. Scores run from 0 to 600, with 400 to pass in 2025–26 and higher cut scores phased in starting in 2026–27.

Metric Units, Perimeter, Area and Volume

Grade 5 uses metric units of length (millimeter, centimeter, meter, kilometer), mass (gram, kilogram) and liquid volume (milliliter, liter). On the test the question gives you the one equivalence you need, such as how many grams are in a kilogram. Going from a larger unit to a smaller unit, multiply; going from a smaller unit to a larger unit, divide. You also decide whether a situation needs perimeter (distance around), area (covering a flat surface) or volume (filling a space), then find it: area of a right triangle with whole-number base and height, and volume of a rectangular prism with whole-number edges. Traps: forgetting the 1/2 in triangle area, using the slanted side of a right triangle as the height, and adding edges instead of multiplying for volume.

Key formulas
Metric length1 km=1,000 m,1 m=100 cm,1 cm=10 mm1\text{ km}=1{,}000\text{ m},\quad 1\text{ m}=100\text{ cm},\quad 1\text{ cm}=10\text{ mm}
Metric mass and liquid volume1 kg=1,000 g,1 L=1,000 mL1\text{ kg}=1{,}000\text{ g},\qquad 1\text{ L}=1{,}000\text{ mL}
Perimeter of a rectangleP=l+w+l+w=2l+2wP=l+w+l+w=2l+2w
Area of a right triangleA=12×b×h(b, h meet at the right angle)A=\tfrac{1}{2}\times b\times h\quad(b,\ h\text{ meet at the right angle})
Volume of a rectangular prismV=l×w×h (cubic units)V=l\times w\times h\ \text{(cubic units)}

Converting metric capacity (5.MG.1)

Method. To change a larger metric unit to a smaller one, multiply by the number of small units in one large unit.

Worked example. 1 liter = 1,000 milliliters. A water cooler jug holds 3 liters of water. How many milliliters of water does the jug hold?

  • (A) 300 milliliters
  • (B) 30,000 milliliters
  • (C) 3,000 milliliters
  • (D) 3 milliliters
AnswerC — 3,000 milliliters
Step-by-step
  1. A liter is a larger unit than a milliliter, so the number of milliliters will be greater.
  2. Each liter is 1,000 milliliters, so 3 liters is 3 × 1,000 milliliters.
  3. 3 × 1,000 = 3,000 milliliters.
Fast methodLarge unit to small unit: multiply by the given equivalence.
Quick checkCheck: 3,000 ÷ 1,000 = 3 liters ✓.
Why the other choices are wrong
  • A (300 milliliters): multiplied by 100 instead of 1,000
  • B (30,000 milliliters): multiplied by 10,000 instead of 1,000 (wrote one zero too many)
  • D (3 milliliters): changed the unit name without changing the number

Choosing perimeter, area or volume (5.MG.2)

Method. Decide what is being measured (around = perimeter, covering = area, filling = volume) before computing.

Worked example. Mr. Patel wants to put a fence around the edge of a rectangular garden that is 12 meters long and 7 meters wide. Which measurement does he need, and what is its value?

  • (A) perimeter, 38 meters
  • (B) area, 84 square meters
  • (C) perimeter, 19 meters
  • (D) area, 38 square meters
AnswerA — perimeter, 38 meters
Step-by-step
  1. A fence goes around the edge, so it measures the distance around: the perimeter.
  2. A rectangle has two lengths and two widths: 12 + 7 + 12 + 7.
  3. 12 + 7 + 12 + 7 = 38 meters.
Fast methodAround the edge means perimeter; add all four sides.
Quick checkCheck: 2 × 12 + 2 × 7 = 24 + 14 = 38 ✓.
Why the other choices are wrong
  • B (area, 84 square meters): found the area (12 × 7) instead of the distance around
  • C (perimeter, 19 meters): added only one length and one width (12 + 7)
  • D (area, 38 square meters): found the distance around but called it area

Volume with a metric conversion (5.MG.1, 5.MG.2)

Method. Find the volume first, then use the given equivalence to change to the unit asked for.

Worked example. A fish tank is shaped like a rectangular prism. It is 50 centimeters long, 30 centimeters wide and 40 centimeters tall. Volume = length × width × height. Each cubic centimeter holds 1 milliliter of water, and 1 liter = 1,000 milliliters. How many liters of water does the tank hold when it is full?

  • (A) 60,000 liters
  • (B) 600 liters
  • (C) 120 liters
  • (D) 60 liters
AnswerD — 60 liters
Step-by-step
  1. Volume = 50 × 30 × 40.
  2. 50 × 30 = 1,500, and 1,500 × 40 = 60,000 cubic centimeters.
  3. 60,000 cubic centimeters hold 60,000 milliliters.
  4. 60,000 ÷ 1,000 = 60 liters.
Fast methodMultiply the three edges, then divide by 1,000 to change milliliters to liters.
Quick checkCheck: 60 × 1,000 = 60,000 and 60,000 ÷ 40 = 1,500 = 50 × 30 ✓.
Why the other choices are wrong
  • A (60,000 liters): found 60,000 cubic centimeters but did not change milliliters to liters
  • B (600 liters): divided 60,000 by 100 instead of 1,000
  • C (120 liters): added the three edge lengths (50 + 30 + 40) instead of multiplying

Angles and Triangles

Classify angles as acute (less than 90°), right (exactly 90°), obtuse (between 90° and 180°) or straight (exactly 180°). Measure an angle with a protractor by finding the difference between the two readings on the same scale. Classify triangles by angles (acute, right, obtuse) and by sides (equilateral, isosceles, scalene); tick marks show equal sides and a small square shows a right angle. The three angles of every triangle add to 180°, so you can find a missing angle. Traps: calling a triangle acute because two of its angles are acute, subtracting only one known angle from 180°, and forgetting that two angles that form a straight line add to 180°.

Key formulas
Angle typesacute<90∘, right=90∘, 90∘<obtuse<180∘, straight=180∘\text{acute}<90^\circ,\ \text{right}=90^\circ,\ 90^\circ<\text{obtuse}<180^\circ,\ \text{straight}=180^\circ
Triangle angle sum∠A+∠B+∠C=180∘\angle A+\angle B+\angle C=180^\circ
Missing angle of a trianglethird angle=180∘−(first+second)\text{third angle}=180^\circ-(\text{first}+\text{second})
Angles on a straight lineangle 1+angle 2=180∘\text{angle }1+\text{angle }2=180^\circ
Triangles by sidesequilateral: 3 equal sides; isosceles: at least 2; scalene: none\text{equilateral: 3 equal sides; isosceles: at least 2; scalene: none}

Classifying angles (5.MG.3)

Method. Compare the angle with 90° and with 180° to classify it.

Worked example. Which angle measure is an obtuse angle?

  • (A) 45°
  • (B) 135°
  • (C) 180°
  • (D) 90°
AnswerB — 135°
Step-by-step
  1. An obtuse angle is greater than 90° and less than 180°.
  2. 45° is acute, 90° is right and 180° is straight.
  3. Only 135° is between 90° and 180°, so 135° is obtuse.
Fast methodObtuse means more than a right angle but less than a straight angle.
Quick checkCheck: 90 < 135 < 180 ✓.
Why the other choices are wrong
  • A (45°): confused acute and obtuse
  • C (180°): thought a straight angle is obtuse
  • D (90°): thought a right angle is obtuse

Unknown angle in a triangle (5.MG.3)

Method. Third angle = 180° − (sum of the two known angles).

Worked example. Two angles of a triangle measure 47° and 68°. What is the measure of the third angle?

  • (A) 115°
  • (B) 65°
  • (C) 133°
  • (D) 245°
AnswerB — 65°
Step-by-step
  1. The three angles of any triangle add to 180°.
  2. 47 + 68 = 115.
  3. 180 − 115 = 65, so the third angle measures 65°.
Fast methodAdd the two known angles and subtract from 180.
Quick checkCheck: 47 + 68 + 65 = 180 ✓.
Why the other choices are wrong
  • A (115°): gave the sum of the two known angles (47 + 68)
  • C (133°): subtracted only one known angle (180 − 47)
  • D (245°): subtracted the two angles from 360° instead of 180°

Straight angle and triangle sum (5.MG.3)

Method. Use a straight angle (180°) to find a missing angle inside the triangle, then use the triangle sum.

Worked example. Points A, B and C lie on a straight line, with B between A and C. Point D is not on the line, and angle ABD measures 130°. In triangle DBC, angle DCB measures 72°. What is the measure of angle BDC?

  • (A) 50°
  • (B) 108°
  • (C) 22°
  • (D) 58°
AnswerD — 58°
Step-by-step
  1. Angles ABD and DBC together make the straight angle ABC, which measures 180°.
  2. Angle DBC = 180 − 130 = 50°.
  3. In triangle DBC the angles add to 180°: 50 + 72 = 122.
  4. Angle BDC = 180 − 122 = 58°.
Fast methodStraight angle first (180 − 130), then triangle sum.
Quick checkCheck: 50 + 72 + 58 = 180 and 130 + 50 = 180 ✓.
Why the other choices are wrong
  • A (50°): stopped after finding angle DBC (180 − 130)
  • B (108°): subtracted only angle DCB from 180° (180 − 72)
  • C (22°): used the 130° angle as an angle of the triangle: 180 − 130 − 72 is −22, then dropped the minus sign

Line Plots, Stem-and-Leaf Plots, Measures of Center and Probability

Read and make line plots (dot plots), where each X is one data value (whole numbers, fractions or decimals), and stem-and-leaf plots, where the key tells you what the stem and leaf mean; plots have 30 or fewer values. Add and subtract using the plot, counting each X. Find the mean (the fair share: add the values and divide by how many there are), the median (the middle value once the data are in order), the mode (the most frequent value) and the range (greatest minus least). For probability, list the sample space (24 or fewer equally likely outcomes) with a list, chart or tree diagram, or multiply choices with the Fundamental Counting Principle; probability is favorable outcomes over total outcomes. Traps: finding a median without ordering, subtracting the numbers of Xs instead of the values, and adding choices instead of multiplying.

Key formulas
Mean (fair share)mean=sum of the valuesnumber of values\text{mean}=\dfrac{\text{sum of the values}}{\text{number of values}}
Rangerange=greatest value−least value\text{range}=\text{greatest value}-\text{least value}
Medianmedian=middle value of the ordered data; with an even number of values, the mean of the two middle values\text{median}=\text{middle value of the ordered data; with an even number of values, the mean of the two middle values}
ProbabilityP(event)=number of favorable outcomestotal number of outcomesP(\text{event})=\dfrac{\text{number of favorable outcomes}}{\text{total number of outcomes}}
Fundamental Counting Principletotal outcomes=(choices for 1st)×(choices for 2nd)×⋯\text{total outcomes}=(\text{choices for 1st})\times(\text{choices for 2nd})\times\cdots

Mode (5.PS.2)

Method. Mode = the value that occurs most often (a data set can have more than one mode or none).

Worked example. A soccer team scored these numbers of goals in 9 games: 2, 4, 1, 4, 3, 0, 4, 2, 5. What is the mode of the data?

  • (A) 4
  • (B) 3
  • (C) 5
  • (D) 9
AnswerA — 4
Step-by-step
  1. The mode is the value that appears most often.
  2. 4 appears three times, 2 appears twice, and every other value appears once.
  3. The mode is 4.
Fast methodTally each value and pick the one with the most tallies.
Quick checkCheck: 0, 1, 2, 2, 3, 4, 4, 4, 5 has three 4s ✓.
Why the other choices are wrong
  • B (3): found the median (the middle of the ordered list)
  • C (5): found the range (5 − 0)
  • D (9): gave the number of games

Mean as fair share (5.PS.2)

Method. Mean = total of the values ÷ number of values (the amount each gets in a fair share).

Worked example. Five friends picked apples. They picked 6, 12, 7, 11 and 14 apples. If they share all the apples equally, how many apples will each friend get?

  • (A) 11
  • (B) 8
  • (C) 10
  • (D) 50
AnswerC — 10
Step-by-step
  1. Sharing equally means finding the mean.
  2. Total: 6 + 12 + 7 + 11 + 14 = 50 apples.
  3. 50 ÷ 5 = 10 apples each.
Fast methodAdd everything, then divide by the number of friends.
Quick checkCheck: 5 × 10 = 50 ✓.
Why the other choices are wrong
  • A (11): found the median instead of the mean
  • B (8): found the range (14 − 6)
  • D (50): found the total but did not divide it among 5 friends

Probability from a sample space (5.PS.3)

Method. Probability = favorable outcomes ÷ total equally likely outcomes; count outcomes with a list, tree or the counting principle.

Worked example. A spinner has 4 equal sections numbered 1, 2, 3 and 4. Ana spins the spinner once and flips a coin once. What is the probability that she gets an even number and heads?

  • (A) 1/2
  • (B) 1/3
  • (C) 3/4
  • (D) 1/4
AnswerD — 1/4
Step-by-step
  1. By the Fundamental Counting Principle there are 4 × 2 = 8 equally likely outcomes.
  2. List them: 1H, 1T, 2H, 2T, 3H, 3T, 4H, 4T.
  3. Even and heads: 2H and 4H, so 2 favorable outcomes.
  4. Probability = 2/8 = 1/4.
Fast methodMultiply the choices to get the outcomes, then count the ones that fit both conditions.
Quick checkCheck: the 8 outcomes split into 4 equal groups (even-heads, even-tails, odd-heads, odd-tails), so each is 1/4 ✓.
Why the other choices are wrong
  • A (1/2): found only the probability of an even number
  • B (1/3): added 4 + 2 = 6 outcomes instead of multiplying, then used 2/6
  • C (3/4): counted outcomes with an even number or heads (6 of 8)

Patterns and Equations with a Variable

A pattern follows one operation. Grade 5 patterns use whole numbers (add, subtract, multiply or divide), fractions with like denominators of 12 or less (add or subtract), or decimals in tenths or hundredths (add or subtract). Find the rule by comparing each term with the one before it, then extend the pattern or fill in a missing term. A variable is a letter that stands for an unknown number. Write a one-operation expression or equation for a word problem, or choose the word problem that matches an equation. Traps: reversing the order in subtraction or division, reading “fewer than” as subtract without asking who has more, and miscounting which term is asked for.

Key formulas
Addition or subtraction rulenext term=term±constant\text{next term}=\text{term}\pm\text{constant}
Multiplication or division rulenext term=term×constant  or  term÷constant\text{next term}=\text{term}\times\text{constant}\ \text{ or }\ \text{term}\div\text{constant}
More than / less thana more than n: n+a,a less than n: n−aa\text{ more than }n:\ n+a,\qquad a\text{ less than }n:\ n-a
Equal groupsgroups×amount per group=total,total÷groups=amount per group\text{groups}\times\text{amount per group}=\text{total},\quad \text{total}\div\text{groups}=\text{amount per group}

Extending an addition pattern (5.PFA.1)

Method. Find the rule by comparing each term with the one before it, then apply the rule.

Worked example. What is the next number in the pattern 14, 23, 32, 41, …?

  • (A) 49
  • (B) 50
  • (C) 51
  • (D) 82
AnswerB — 50
Step-by-step
  1. Find the change from each number to the next: 23 − 14 = 9, 32 − 23 = 9, 41 − 32 = 9.
  2. The rule is add 9.
  3. 41 + 9 = 50.
Fast methodFind the constant difference and add it once more.
Quick checkCheck: 50 − 41 = 9, the same as every other step ✓.
Why the other choices are wrong
  • A (49): added 8 instead of 9
  • C (51): added 10 instead of 9
  • D (82): doubled the last number instead of using the rule

Decimal pattern (5.PFA.1)

Method. For a decimal pattern, subtract neighboring terms (lining up place values) to find the rule.

Worked example. What is the next number in the pattern 1.2, 1.6, 2.0, 2.4, …?

  • (A) 2.8
  • (B) 2.5
  • (C) 3.2
  • (D) 2.44
AnswerA — 2.8
Step-by-step
  1. Each term is 0.4 more than the one before: 1.6 − 1.2 = 0.4, 2.0 − 1.6 = 0.4.
  2. The rule is add 0.4.
  3. 2.4 + 0.4 = 2.8.
Fast methodLine up the tenths and add 4 tenths.
Quick checkCheck: 2.8 − 2.4 = 0.4 ✓.
Why the other choices are wrong
  • B (2.5): added 0.1 instead of 0.4
  • C (3.2): skipped a term: gave 2.4 + 0.8
  • D (2.44): added 0.04 instead of 0.4

Writing an equation (5.PFA.2)

Method. Name what the variable stands for, then write total, groups and amount per group in the right places.

Worked example. Mrs. Lee shares 42 juice boxes equally among some tables in the cafeteria. Each table gets 6 juice boxes. Which equation can be used to find t, the number of tables?

  • (A) t ÷ 6 = 42
  • (B) 6 ÷ t = 42
  • (C) 42 ÷ t = 6
  • (D) 42 − t = 6
AnswerC — 42 ÷ t = 6
Step-by-step
  1. Sharing a total equally among groups is division: total ÷ number of groups = amount in each group.
  2. The total is 42, the number of tables is t, and each table gets 6.
  3. So 42 ÷ t = 6 (and t = 7).
Fast methodTotal ÷ groups = per group.
Quick checkCheck: 42 ÷ 7 = 6 ✓.
Why the other choices are wrong
  • A (t ÷ 6 = 42): put the unknown in the place of the total
  • B (6 ÷ t = 42): switched the total and the amount per table
  • D (42 − t = 6): used subtraction instead of equal sharing